Merge master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc

* master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc: (61 commits)
  [POWERPC] Use udbg_early_init() on ppc32
  [POWERPC] Open Firmware serial port driver
  [POWERPC] Move MPIC smp routines into mpic.c
  [POWERPC] Cleanup pseries kexec code
  [POWERPC] Cleanup pseries smp initialisation code
  [POWERPC] Consolidate pseries platform header files into pseries.h
  [POWERPC] 85xx: Drop use of SYNC macro in head_fsl_booke.S
  [POWERPC] cell: pm_rtas_activat_signals routine cleanup
  [POWERPC] cell: PPU Oprofile cleanup patch
  [POWERPC] spufs: avoid accessing kernel memory through mmapped /mem node
  [POWERPC] spu sched: static timeslicing for SCHED_RR contexts
  [POWERPC] spu sched: use DECLARE_BITMAP
  [POWERPC] spu sched: forced preemption at execution
  [POWERPC] spu sched: update some comments
  [POWERPC] spu sched: simplity spu_remove_from_active_list
  [POWERPC] spufs: optimize spu_run
  [POWERPC] spufs: runqueue simplification
  [POWERPC] spufs: move prio to spu_context
  [POWERPC] spufs: state_mutex cleanup
  [POWERPC] spufs: simplify state_mutex
  ...

Documentation/powerpc/booting-without-of.txt

@@ -1334,6 +1334,9 @@ platforms are moved over to use the flattened-device-tree model.
       fsl-usb2-mph compatible controllers.  Either this property or
       "port0" (or both) must be defined for "fsl-usb2-mph" compatible 
       controllers.
+    - dr_mode : indicates the working mode for "fsl-usb2-dr" compatible
+      controllers.  Can be "host", "peripheral", or "otg".  Default to
+      "host" if not defined for backward compatibility.
 
    Recommended properties :
     - interrupts : <a b> where a is the interrupt number and b is a
@@ -1367,6 +1370,7 @@ platforms are moved over to use the flattened-device-tree model.
 		#size-cells = <0>;
 		interrupt-parent = <700>;
 		interrupts = <26 1>;
+		dr_mode = "otg";
 		phy = "ulpi";
 	};
 

arch/powerpc/Kconfig

@@ -876,7 +876,7 @@ config ARCH_SPARSEMEM_ENABLE
 
 config ARCH_SPARSEMEM_DEFAULT
 	def_bool y
-	depends on (SMP && PPC_PSERIES) || PPC_CELL
+	depends on (SMP && PPC_PSERIES) || PPC_PS3
 
 config ARCH_POPULATES_NODE_MAP
 	def_bool y

arch/powerpc/boot/dts/kuroboxHD.dts

+/*
+ * Device Tree Souce for Buffalo KuroboxHD
+ *
+ * Choose CONFIG_LINKSTATION to build a kernel for KuroboxHD, or use
+ * the default configuration linkstation_defconfig.
+ *
+ * Based on sandpoint.dts
+ *
+ * 2006 (c) G. Liakhovetski <g.liakhovetski@gmx.de>
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+
+XXXX add flash parts, rtc, ??
+
+build with: "dtc -f -I dts -O dtb -o kuroboxHD.dtb -V 16 kuroboxHD.dts"
+
+
+ */
+
+/ {
+	linux,phandle = <1000>;
+	model = "KuroboxHD";
+	compatible = "linkstation";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		linux,phandle = <2000>;
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,603e { /* Really 8241 */
+			linux,phandle = <2100>;
+			linux,boot-cpu;
+			device_type = "cpu";
+			reg = <0>;
+			clock-frequency = <bebc200>;	/* Fixed by bootwrapper */
+			timebase-frequency = <1743000>; /* Fixed by bootwrapper */
+			bus-frequency = <0>;		/* From bootloader */
+			/* Following required by dtc but not used */
+			i-cache-line-size = <0>;
+			d-cache-line-size = <0>;
+			i-cache-size = <4000>;
+			d-cache-size = <4000>;
+		};
+	};
+
+	memory {
+		linux,phandle = <3000>;
+		device_type = "memory";
+		reg = <00000000 04000000>;
+	};
+
+	soc10x { /* AFAICT need to make soc for 8245's uarts to be defined */
+		linux,phandle = <4000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		device_type = "soc";
+		compatible = "mpc10x";
+		store-gathering = <0>; /* 0 == off, !0 == on */
+		reg = <80000000 00100000>;
+		ranges = <80000000 80000000 70000000	/* pci mem space */
+			  fc000000 fc000000 00100000	/* EUMB */
+			  fe000000 fe000000 00c00000	/* pci i/o space */
+			  fec00000 fec00000 00300000	/* pci cfg regs */
+			  fef00000 fef00000 00100000>;	/* pci iack */
+
+		i2c@80003000 {
+			linux,phandle = <4300>;
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <80003000 1000>;
+			interrupts = <5 2>;
+			interrupt-parent = <4400>;
+		};
+
+		serial@80004500 {
+			linux,phandle = <4511>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <80004500 8>;
+			clock-frequency = <5d08d88>;
+			current-speed = <2580>;
+			interrupts = <9 2>;
+			interrupt-parent = <4400>;
+		};
+
+		serial@80004600 {
+			linux,phandle = <4512>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <80004600 8>;
+			clock-frequency = <5d08d88>;
+			current-speed = <e100>;
+			interrupts = <a 0>;
+			interrupt-parent = <4400>;
+		};
+
+		pic@80040000 {
+			linux,phandle = <4400>;
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			device_type = "open-pic";
+			compatible = "chrp,open-pic";
+			interrupt-controller;
+			reg = <80040000 40000>;
+			built-in;
+		};
+
+		pci@fec00000 {
+			linux,phandle = <4500>;
+			#address-cells = <3>;
+			#size-cells = <2>;
+			#interrupt-cells = <1>;
+			device_type = "pci";
+			compatible = "mpc10x-pci";
+			reg = <fec00000 400000>;
+			ranges = <01000000 0        0 fe000000 0 00c00000
+				  02000000 0 80000000 80000000 0 70000000>;
+			bus-range = <0 ff>;
+			clock-frequency = <7f28155>;
+			interrupt-parent = <4400>;
+			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map = <
+				/* IDSEL 0x11 - IRQ0 ETH */
+				5800 0 0 1 4400 0 1
+				5800 0 0 2 4400 1 1
+				5800 0 0 3 4400 2 1
+				5800 0 0 4 4400 3 1
+				/* IDSEL 0x12 - IRQ1 IDE0 */
+				6000 0 0 1 4400 1 1
+				6000 0 0 2 4400 2 1
+				6000 0 0 3 4400 3 1
+				6000 0 0 4 4400 0 1
+				/* IDSEL 0x14 - IRQ3 USB2.0 */
+				7000 0 0 1 4400 3 1
+				7000 0 0 2 4400 3 1
+				7000 0 0 3 4400 3 1
+				7000 0 0 4 4400 3 1
+			>;
+		};
+	};
+};

arch/powerpc/boot/dts/lite5200.dts

 /*
  * Lite5200 board Device Tree Source
  *
- * Copyright 2006 Secret Lab Technologies Ltd.
+ * Copyright 2006-2007 Secret Lab Technologies Ltd.
  * Grant Likely <grant.likely@secretlab.ca>
  *
  * This program is free software; you can redistribute  it and/or modify it
@@ -17,8 +17,9 @@
  */
 
 / {
-	model = "Lite5200";
-	compatible = "lite5200\0lite52xx\0mpc5200\0mpc52xx";
+	model = "fsl,lite5200";
+	// revision = "1.0";
+	compatible = "fsl,lite5200\0generic-mpc5200";
 	#address-cells = <1>;
 	#size-cells = <1>;
 
@@ -47,14 +48,17 @@ memory {
 	};
 
 	soc5200@f0000000 {
+		model = "fsl,mpc5200";
+		revision = ""			// from bootloader
 		#interrupt-cells = <3>;
 		device_type = "soc";
 		ranges = <0 f0000000 f0010000>;
 		reg = <f0000000 00010000>;
 		bus-frequency = <0>;		// from bootloader
+		system-frequency = <0>;		// from bootloader
 
 		cdm@200 {
-			compatible = "mpc5200-cdm\0mpc52xx-cdm";
+			compatible = "mpc5200-cdm";
 			reg = <200 38>;
 		};
 
@@ -64,77 +68,86 @@ pic@500 {
 			interrupt-controller;
 			#interrupt-cells = <3>;
 			device_type = "interrupt-controller";
-			compatible = "mpc5200-pic\0mpc52xx-pic";
+			compatible = "mpc5200-pic";
 			reg = <500 80>;
 			built-in;
 		};
 
 		gpt@600 {	// General Purpose Timer
-			compatible = "mpc5200-gpt\0mpc52xx-gpt";
+			compatible = "mpc5200-gpt";
 			device_type = "gpt";
+			cell-index = <0>;
 			reg = <600 10>;
 			interrupts = <1 9 0>;
 			interrupt-parent = <500>;
+			has-wdt;
 		};
 
 		gpt@610 {	// General Purpose Timer
-			compatible = "mpc5200-gpt\0mpc52xx-gpt";
+			compatible = "mpc5200-gpt";
 			device_type = "gpt";
+			cell-index = <1>;
 			reg = <610 10>;
 			interrupts = <1 a 0>;
 			interrupt-parent = <500>;
 		};
 
 		gpt@620 {	// General Purpose Timer
-			compatible = "mpc5200-gpt\0mpc52xx-gpt";
+			compatible = "mpc5200-gpt";
 			device_type = "gpt";
+			cell-index = <2>;
 			reg = <620 10>;
 			interrupts = <1 b 0>;
 			interrupt-parent = <500>;
 		};
 
 		gpt@630 {	// General Purpose Timer
-			compatible = "mpc5200-gpt\0mpc52xx-gpt";
+			compatible = "mpc5200-gpt";
 			device_type = "gpt";
+			cell-index = <3>;
 			reg = <630 10>;
 			interrupts = <1 c 0>;
 			interrupt-parent = <500>;
 		};
 
 		gpt@640 {	// General Purpose Timer
-			compatible = "mpc5200-gpt\0mpc52xx-gpt";
+			compatible = "mpc5200-gpt";
 			device_type = "gpt";
+			cell-index = <4>;
 			reg = <640 10>;
 			interrupts = <1 d 0>;
 			interrupt-parent = <500>;
 		};
 
 		gpt@650 {	// General Purpose Timer
-			compatible = "mpc5200-gpt\0mpc52xx-gpt";
+			compatible = "mpc5200-gpt";
 			device_type = "gpt";
+			cell-index = <5>;
 			reg = <650 10>;
 			interrupts = <1 e 0>;
 			interrupt-parent = <500>;
 		};
 
 		gpt@660 {	// General Purpose Timer
-			compatible = "mpc5200-gpt\0mpc52xx-gpt";
+			compatible = "mpc5200-gpt";
 			device_type = "gpt";
+			cell-index = <6>;
 			reg = <660 10>;
 			interrupts = <1 f 0>;
 			interrupt-parent = <500>;
 		};
 
 		gpt@670 {	// General Purpose Timer
-			compatible = "mpc5200-gpt\0mpc52xx-gpt";
+			compatible = "mpc5200-gpt";
 			device_type = "gpt";
+			cell-index = <7>;
 			reg = <670 10>;
 			interrupts = <1 10 0>;
 			interrupt-parent = <500>;
 		};
 
 		rtc@800 {	// Real time clock
-			compatible = "mpc5200-rtc\0mpc52xx-rtc";
+			compatible = "mpc5200-rtc";
 			device_type = "rtc";
 			reg = <800 100>;
 			interrupts = <1 5 0 1 6 0>;
@@ -143,7 +156,8 @@ rtc@800 {	// Real time clock
 
 		mscan@900 {
 			device_type = "mscan";
-			compatible = "mpc5200-mscan\0mpc52xx-mscan";
+			compatible = "mpc5200-mscan";
+			cell-index = <0>;
 			interrupts = <2 11 0>;
 			interrupt-parent = <500>;
 			reg = <900 80>;
@@ -151,21 +165,22 @@ mscan@900 {
 
 		mscan@980 {
 			device_type = "mscan";
-			compatible = "mpc5200-mscan\0mpc52xx-mscan";
+			compatible = "mpc5200-mscan";
+			cell-index = <1>;
 			interrupts = <1 12 0>;
 			interrupt-parent = <500>;
 			reg = <980 80>;
 		};
 
 		gpio@b00 {
-			compatible = "mpc5200-gpio\0mpc52xx-gpio";
+			compatible = "mpc5200-gpio";
 			reg = <b00 40>;
 			interrupts = <1 7 0>;
 			interrupt-parent = <500>;
 		};
 
 		gpio-wkup@b00 {
-			compatible = "mpc5200-gpio-wkup\0mpc52xx-gpio-wkup";
+			compatible = "mpc5200-gpio-wkup";
 			reg = <c00 40>;
 			interrupts = <1 8 0 0 3 0>;
 			interrupt-parent = <500>;
@@ -176,7 +191,7 @@ pci@0d00 {
 			#size-cells = <2>;
 			#address-cells = <3>;
 			device_type = "pci";
-			compatible = "mpc5200-pci\0mpc52xx-pci";
+			compatible = "mpc5200-pci";
 			reg = <d00 100>;
 			interrupt-map-mask = <f800 0 0 7>;
 			interrupt-map = <c000 0 0 1 500 0 0 3
@@ -194,7 +209,7 @@ c000 0 0 3 500 0 0 3
 
 		spi@f00 {
 			device_type = "spi";
-			compatible = "mpc5200-spi\0mpc52xx-spi";
+			compatible = "mpc5200-spi";
 			reg = <f00 20>;
 			interrupts = <2 d 0 2 e 0>;
 			interrupt-parent = <500>;
@@ -202,7 +217,7 @@ spi@f00 {
 
 		usb@1000 {
 			device_type = "usb-ohci-be";
-			compatible = "mpc5200-ohci\0mpc52xx-ohci\0ohci-be";
+			compatible = "mpc5200-ohci\0ohci-be";
 			reg = <1000 ff>;
 			interrupts = <2 6 0>;
 			interrupt-parent = <500>;
@@ -210,7 +225,7 @@ usb@1000 {
 
 		bestcomm@1200 {
 			device_type = "dma-controller";
-			compatible = "mpc5200-bestcomm\0mpc52xx-bestcomm";
+			compatible = "mpc5200-bestcomm";
 			reg = <1200 80>;
 			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
 			              3 4 0  3 5 0  3 6 0  3 7 0
@@ -220,67 +235,73 @@ bestcomm@1200 {
 		};
 
 		xlb@1f00 {
-			compatible = "mpc5200-xlb\0mpc52xx-xlb";
+			compatible = "mpc5200-xlb";
 			reg = <1f00 100>;
 		};
 
 		serial@2000 {		// PSC1
 			device_type = "serial";
-			compatible = "mpc5200-psc-uart\0mpc52xx-psc-uart";
+			compatible = "mpc5200-psc-uart";
 			port-number = <0>;  // Logical port assignment
+			cell-index = <0>;
 			reg = <2000 100>;
 			interrupts = <2 1 0>;
 			interrupt-parent = <500>;
 		};
 
-		// PSC2 in spi mode example
-		spi@2200 {		// PSC2
-			device_type = "spi";
-			compatible = "mpc5200-psc-spi\0mpc52xx-psc-spi";
-			reg = <2200 100>;
-			interrupts = <2 2 0>;
-			interrupt-parent = <500>;
-		};
+		// PSC2 in ac97 mode example
+		//ac97@2200 {		// PSC2
+		//	device_type = "sound";
+		//	compatible = "mpc5200-psc-ac97";
+		//	cell-index = <1>;
+		//	reg = <2200 100>;
+		//	interrupts = <2 2 0>;
+		//	interrupt-parent = <500>;
+		//};
 
 		// PSC3 in CODEC mode example
-		i2s@2400 {		// PSC3
-			device_type = "sound";
-			compatible = "mpc5200-psc-i2s\0mpc52xx-psc-i2s";
-			reg = <2400 100>;
-			interrupts = <2 3 0>;
-			interrupt-parent = <500>;
-		};
+		//i2s@2400 {		// PSC3
+		//	device_type = "sound";
+		//	compatible = "mpc5200-psc-i2s";
+		//	cell-index = <2>;
+		//	reg = <2400 100>;
+		//	interrupts = <2 3 0>;
+		//	interrupt-parent = <500>;
+		//};
 
-		// PSC4 unconfigured
+		// PSC4 in uart mode example
 		//serial@2600 {		// PSC4
 		//	device_type = "serial";
-		//	compatible = "mpc5200-psc-uart\0mpc52xx-psc-uart";
+		//	compatible = "mpc5200-psc-uart";
+		//	cell-index = <3>;
 		//	reg = <2600 100>;
 		//	interrupts = <2 b 0>;
 		//	interrupt-parent = <500>;
 		//};
 
-		// PSC5 unconfigured
+		// PSC5 in uart mode example
 		//serial@2800 {		// PSC5
 		//	device_type = "serial";
-		//	compatible = "mpc5200-psc-uart\0mpc52xx-psc-uart";
+		//	compatible = "mpc5200-psc-uart";
+		//	cell-index = <4>;
 		//	reg = <2800 100>;
 		//	interrupts = <2 c 0>;
 		//	interrupt-parent = <500>;
 		//};
 
-		// PSC6 in AC97 mode example
-		ac97@2c00 {		// PSC6
-			device_type = "sound";
-			compatible = "mpc5200-psc-ac97\0mpc52xx-psc-ac97";
-			reg = <2c00 100>;
-			interrupts = <2 4 0>;
-			interrupt-parent = <500>;
-		};
+		// PSC6 in spi mode example
+		//spi@2c00 {		// PSC6
+		//	device_type = "spi";
+		//	compatible = "mpc5200-psc-spi";
+		//	cell-index = <5>;
+		//	reg = <2c00 100>;
+		//	interrupts = <2 4 0>;
+		//	interrupt-parent = <500>;
+		//};
 
 		ethernet@3000 {
 			device_type = "network";
-			compatible = "mpc5200-fec\0mpc52xx-fec";
+			compatible = "mpc5200-fec";
 			reg = <3000 800>;
 			mac-address = [ 02 03 04 05 06 07 ]; // Bad!
 			interrupts = <2 5 0>;
@@ -289,7 +310,7 @@ ethernet@3000 {
 
 		ata@3a00 {
 			device_type = "ata";
-			compatible = "mpc5200-ata\0mpc52xx-ata";
+			compatible = "mpc5200-ata";
 			reg = <3a00 100>;
 			interrupts = <2 7 0>;
 			interrupt-parent = <500>;
@@ -297,7 +318,8 @@ ata@3a00 {
 
 		i2c@3d00 {
 			device_type = "i2c";
-			compatible = "mpc5200-i2c\0mpc52xx-i2c";
+			compatible = "mpc5200-i2c";
+			cell-index = <0>;
 			reg = <3d00 40>;
 			interrupts = <2 f 0>;
 			interrupt-parent = <500>;
@@ -305,14 +327,15 @@ i2c@3d00 {
 
 		i2c@3d40 {
 			device_type = "i2c";
-			compatible = "mpc5200-i2c\0mpc52xx-i2c";
+			compatible = "mpc5200-i2c";
+			cell-index = <1>;
 			reg = <3d40 40>;
 			interrupts = <2 10 0>;
 			interrupt-parent = <500>;
 		};
 		sram@8000 {
 			device_type = "sram";
-			compatible = "mpc5200-sram\0mpc52xx-sram\0sram";
+			compatible = "mpc5200-sram\0sram";
 			reg = <8000 4000>;
 		};
 	};

arch/powerpc/boot/dts/lite5200b.dts

 /*
  * Lite5200B board Device Tree Source
  *
- * Copyright 2006 Secret Lab Technologies Ltd.
+ * Copyright 2006-2007 Secret Lab Technologies Ltd.
  * Grant Likely <grant.likely@secretlab.ca>
  *
  * This program is free software; you can redistribute  it and/or modify it
@@ -17,8 +17,9 @@
  */
 
 / {
-	model = "Lite5200b";
-	compatible = "lite5200b\0lite52xx\0mpc5200b\0mpc52xx";
+	model = "fsl,lite5200b";
+	// revision = "1.0";
+	compatible = "fsl,lite5200b\0generic-mpc5200";
 	#address-cells = <1>;
 	#size-cells = <1>;
 
@@ -47,14 +48,17 @@ memory {
 	};
 
 	soc5200@f0000000 {
+		model = "fsl,mpc5200b";
+		revision = "";			// from bootloader
 		#interrupt-cells = <3>;
 		device_type = "soc";
 		ranges = <0 f0000000 f0010000>;
 		reg = <f0000000 00010000>;
 		bus-frequency = <0>;		// from bootloader
+		system-frequency = <0>;		// from bootloader
 
 		cdm@200 {
-			compatible = "mpc5200b-cdm\0mpc52xx-cdm";
+			compatible = "mpc5200b-cdm\0mpc5200-cdm";
 			reg = <200 38>;
 		};
 
@@ -64,77 +68,86 @@ pic@500 {
 			interrupt-controller;
 			#interrupt-cells = <3>;
 			device_type = "interrupt-controller";
-			compatible = "mpc5200b-pic\0mpc52xx-pic";
+			compatible = "mpc5200b-pic\0mpc5200-pic";
 			reg = <500 80>;
 			built-in;
 		};
 
 		gpt@600 {	// General Purpose Timer
-			compatible = "mpc5200b-gpt\0mpc52xx-gpt";
+			compatible = "mpc5200b-gpt\0mpc5200-gpt";
 			device_type = "gpt";
+			cell-index = <0>;
 			reg = <600 10>;
 			interrupts = <1 9 0>;
 			interrupt-parent = <500>;
+			has-wdt;
 		};
 
 		gpt@610 {	// General Purpose Timer
-			compatible = "mpc5200b-gpt\0mpc52xx-gpt";
+			compatible = "mpc5200b-gpt\0mpc5200-gpt";
 			device_type = "gpt";
+			cell-index = <1>;
 			reg = <610 10>;
 			interrupts = <1 a 0>;
 			interrupt-parent = <500>;
 		};
 
 		gpt@620 {	// General Purpose Timer
-			compatible = "mpc5200b-gpt\0mpc52xx-gpt";
+			compatible = "mpc5200b-gpt\0mpc5200-gpt";
 			device_type = "gpt";
+			cell-index = <2>;
 			reg = <620 10>;
 			interrupts = <1 b 0>;
 			interrupt-parent = <500>;
 		};
 
 		gpt@630 {	// General Purpose Timer
-			compatible = "mpc5200b-gpt\0mpc52xx-gpt";
+			compatible = "mpc5200b-gpt\0mpc5200-gpt";
 			device_type = "gpt";
+			cell-index = <3>;
 			reg = <630 10>;
 			interrupts = <1 c 0>;
 			interrupt-parent = <500>;
 		};
 
 		gpt@640 {	// General Purpose Timer
-			compatible = "mpc5200b-gpt\0mpc52xx-gpt";
+			compatible = "mpc5200b-gpt\0mpc5200-gpt";
 			device_type = "gpt";
+			cell-index = <4>;
 			reg = <640 10>;
 			interrupts = <1 d 0>;
 			interrupt-parent = <500>;
 		};
 
 		gpt@650 {	// General Purpose Timer
-			compatible = "mpc5200b-gpt\0mpc52xx-gpt";
+			compatible = "mpc5200b-gpt\0mpc5200-gpt";
 			device_type = "gpt";
+			cell-index = <5>;
 			reg = <650 10>;
 			interrupts = <1 e 0>;
 			interrupt-parent = <500>;
 		};
 
 		gpt@660 {	// General Purpose Timer
-			compatible = "mpc5200b-gpt\0mpc52xx-gpt";
+			compatible = "mpc5200b-gpt\0mpc5200-gpt";
 			device_type = "gpt";
+			cell-index = <6>;
 			reg = <660 10>;
 			interrupts = <1 f 0>;
 			interrupt-parent = <500>;
 		};
 
 		gpt@670 {	// General Purpose Timer
-			compatible = "mpc5200b-gpt\0mpc52xx-gpt";
+			compatible = "mpc5200b-gpt\0mpc5200-gpt";
 			device_type = "gpt";
+			cell-index = <7>;
 			reg = <670 10>;
 			interrupts = <1 10 0>;
 			interrupt-parent = <500>;
 		};
 
 		rtc@800 {	// Real time clock
-			compatible = "mpc5200b-rtc\0mpc52xx-rtc";
+			compatible = "mpc5200b-rtc\0mpc5200-rtc";
 			device_type = "rtc";
 			reg = <800 100>;
 			interrupts = <1 5 0 1 6 0>;
@@ -143,7 +156,8 @@ rtc@800 {	// Real time clock
 
 		mscan@900 {
 			device_type = "mscan";
-			compatible = "mpc5200b-mscan\0mpc52xx-mscan";
+			compatible = "mpc5200b-mscan\0mpc5200-mscan";
+			cell-index = <0>;
 			interrupts = <2 11 0>;
 			interrupt-parent = <500>;
 			reg = <900 80>;
@@ -151,21 +165,22 @@ mscan@900 {
 
 		mscan@980 {
 			device_type = "mscan";
-			compatible = "mpc5200b-mscan\0mpc52xx-mscan";
+			compatible = "mpc5200b-mscan\0mpc5200-mscan";
+			cell-index = <1>;
 			interrupts = <1 12 0>;
 			interrupt-parent = <500>;
 			reg = <980 80>;
 		};
 
 		gpio@b00 {
-			compatible = "mpc5200b-gpio\0mpc52xx-gpio";
+			compatible = "mpc5200b-gpio\0mpc5200-gpio";
 			reg = <b00 40>;
 			interrupts = <1 7 0>;
 			interrupt-parent = <500>;
 		};
 
 		gpio-wkup@b00 {
-			compatible = "mpc5200b-gpio-wkup\0mpc52xx-gpio-wkup";
+			compatible = "mpc5200b-gpio-wkup\0mpc5200-gpio-wkup";
 			reg = <c00 40>;
 			interrupts = <1 8 0 0 3 0>;
 			interrupt-parent = <500>;
@@ -176,7 +191,7 @@ pci@0d00 {
 			#size-cells = <2>;
 			#address-cells = <3>;
 			device_type = "pci";
-			compatible = "mpc5200b-pci\0mpc52xx-pci";
+			compatible = "mpc5200b-pci\0mpc5200-pci";
 			reg = <d00 100>;
 			interrupt-map-mask = <f800 0 0 7>;
 			interrupt-map = <c000 0 0 1 500 0 0 3 // 1st slot
@@ -199,7 +214,7 @@ c800 0 0 3 500 1 3 3
 
 		spi@f00 {
 			device_type = "spi";
-			compatible = "mpc5200b-spi\0mpc52xx-spi";
+			compatible = "mpc5200b-spi\0mpc5200-spi";
 			reg = <f00 20>;
 			interrupts = <2 d 0 2 e 0>;
 			interrupt-parent = <500>;
@@ -207,7 +222,7 @@ spi@f00 {
 
 		usb@1000 {
 			device_type = "usb-ohci-be";
-			compatible = "mpc5200b-ohci\0mpc52xx-ohci\0ohci-be";
+			compatible = "mpc5200b-ohci\0mpc5200-ohci\0ohci-be";
 			reg = <1000 ff>;
 			interrupts = <2 6 0>;
 			interrupt-parent = <500>;
@@ -215,7 +230,7 @@ usb@1000 {
 
 		bestcomm@1200 {
 			device_type = "dma-controller";
-			compatible = "mpc5200b-bestcomm\0mpc52xx-bestcomm";
+			compatible = "mpc5200b-bestcomm\0mpc5200-bestcomm";
 			reg = <1200 80>;
 			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
 			              3 4 0  3 5 0  3 6 0  3 7 0
@@ -225,67 +240,73 @@ bestcomm@1200 {
 		};
 
 		xlb@1f00 {
-			compatible = "mpc5200b-xlb\0mpc52xx-xlb";
+			compatible = "mpc5200b-xlb\0mpc5200-xlb";
 			reg = <1f00 100>;
 		};
 
 		serial@2000 {		// PSC1
 			device_type = "serial";
-			compatible = "mpc5200b-psc-uart\0mpc52xx-psc-uart";
+			compatible = "mpc5200b-psc-uart\0mpc5200-psc-uart";
 			port-number = <0>;  // Logical port assignment
+			cell-index = <0>;
 			reg = <2000 100>;
 			interrupts = <2 1 0>;
 			interrupt-parent = <500>;
 		};
 
-		// PSC2 in spi mode example
-		spi@2200 {		// PSC2
-			device_type = "spi";
-			compatible = "mpc5200b-psc-spi\0mpc52xx-psc-spi";
-			reg = <2200 100>;
-			interrupts = <2 2 0>;
-			interrupt-parent = <500>;
-		};
+		// PSC2 in ac97 mode example
+		//ac97@2200 {		// PSC2
+		//	device_type = "sound";
+		//	compatible = "mpc5200b-psc-ac97\0mpc5200-psc-ac97";
+		//	cell-index = <1>;
+		//	reg = <2200 100>;
+		//	interrupts = <2 2 0>;
+		//	interrupt-parent = <500>;
+		//};
 
 		// PSC3 in CODEC mode example
-		i2s@2400 {		// PSC3
-			device_type = "sound";
-			compatible = "mpc5200b-psc-i2s\0mpc52xx-psc-i2s";
-			reg = <2400 100>;
-			interrupts = <2 3 0>;
-			interrupt-parent = <500>;
-		};
+		//i2s@2400 {		// PSC3
+		//	device_type = "sound";
+		//	compatible = "mpc5200b-psc-i2s"; //not 5200 compatible
+		//	cell-index = <2>;
+		//	reg = <2400 100>;
+		//	interrupts = <2 3 0>;
+		//	interrupt-parent = <500>;
+		//};
 
-		// PSC4 unconfigured
+		// PSC4 in uart mode example
 		//serial@2600 {		// PSC4
 		//	device_type = "serial";
-		//	compatible = "mpc5200b-psc-uart\0mpc52xx-psc-uart";
+		//	compatible = "mpc5200b-psc-uart\0mpc5200-psc-uart";
+		//	cell-index = <3>;
 		//	reg = <2600 100>;
 		//	interrupts = <2 b 0>;
 		//	interrupt-parent = <500>;
 		//};
 
-		// PSC5 unconfigured
+		// PSC5 in uart mode example
 		//serial@2800 {		// PSC5
 		//	device_type = "serial";
-		//	compatible = "mpc5200b-psc-uart\0mpc52xx-psc-uart";
+		//	compatible = "mpc5200b-psc-uart\0mpc5200-psc-uart";
+		//	cell-index = <4>;
 		//	reg = <2800 100>;
 		//	interrupts = <2 c 0>;
 		//	interrupt-parent = <500>;
 		//};
 
-		// PSC6 in AC97 mode example
-		ac97@2c00 {		// PSC6
-			device_type = "sound";
-			compatible = "mpc5200b-psc-ac97\0mpc52xx-psc-ac97";
-			reg = <2c00 100>;
-			interrupts = <2 4 0>;
-			interrupt-parent = <500>;
-		};
+		// PSC6 in spi mode example
+		//spi@2c00 {		// PSC6
+		//	device_type = "spi";
+		//	compatible = "mpc5200b-psc-spi\0mpc5200-psc-spi";
+		//	cell-index = <5>;
+		//	reg = <2c00 100>;
+		//	interrupts = <2 4 0>;
+		//	interrupt-parent = <500>;
+		//};
 
 		ethernet@3000 {
 			device_type = "network";
-			compatible = "mpc5200b-fec\0mpc52xx-fec";
+			compatible = "mpc5200b-fec\0mpc5200-fec";
 			reg = <3000 800>;
 			mac-address = [ 02 03 04 05 06 07 ]; // Bad!
 			interrupts = <2 5 0>;
@@ -294,7 +315,7 @@ ethernet@3000 {
 
 		ata@3a00 {
 			device_type = "ata";
-			compatible = "mpc5200b-ata\0mpc52xx-ata";
+			compatible = "mpc5200b-ata\0mpc5200-ata";
 			reg = <3a00 100>;
 			interrupts = <2 7 0>;
 			interrupt-parent = <500>;
@@ -302,7 +323,8 @@ ata@3a00 {
 
 		i2c@3d00 {
 			device_type = "i2c";
-			compatible = "mpc5200b-i2c\0mpc52xx-i2c";
+			compatible = "mpc5200b-i2c\0mpc5200-i2c";
+			cell-index = <0>;
 			reg = <3d00 40>;
 			interrupts = <2 f 0>;
 			interrupt-parent = <500>;
@@ -310,14 +332,15 @@ i2c@3d00 {
 
 		i2c@3d40 {
 			device_type = "i2c";
-			compatible = "mpc5200b-i2c\0mpc52xx-i2c";
+			compatible = "mpc5200b-i2c\0mpc5200-i2c";
+			cell-index = <1>;
 			reg = <3d40 40>;
 			interrupts = <2 10 0>;
 			interrupt-parent = <500>;
 		};
 		sram@8000 {
 			device_type = "sram";
-			compatible = "mpc5200b-sram\0mpc52xx-sram\0sram";
+			compatible = "mpc5200b-sram\0mpc5200-sram\0sram";
 			reg = <8000 4000>;
 		};
 	};

arch/powerpc/boot/dts/mpc8313erdb.dts

+/*
+ * MPC8313E RDB Device Tree Source
+ *
+ * Copyright 2005, 2006, 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/ {
+	model = "MPC8313ERDB";
+	compatible = "MPC83xx";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8313@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <20>;	// 32 bytes
+			i-cache-line-size = <20>;	// 32 bytes
+			d-cache-size = <4000>;		// L1, 16K
+			i-cache-size = <4000>;		// L1, 16K
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+			32-bit;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <00000000 08000000>;	// 128MB at 0
+	};
+
+	soc8313@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		device_type = "soc";
+		ranges = <0 e0000000 00100000>;
+		reg = <e0000000 00000200>;
+		bus-frequency = <0>;
+
+		wdt@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <200 100>;
+		};
+
+		i2c@3000 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3000 100>;
+			interrupts = <e 8>;
+			interrupt-parent = <700>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3100 100>;
+			interrupts = <f 8>;
+			interrupt-parent = <700>;
+			dfsrr;
+		};
+
+		spi@7000 {
+			device_type = "spi";
+			compatible = "mpc83xx_spi";
+			reg = <7000 1000>;
+			interrupts = <10 8>;
+			interrupt-parent = <700>;
+			mode = <0>;
+		};
+
+		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
+		usb@23000 {
+			device_type = "usb";
+			compatible = "fsl-usb2-dr";
+			reg = <23000 1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <700>;
+			interrupts = <26 2>;
+			phy_type = "utmi_wide";
+		};
+
+		mdio@24520 {
+			device_type = "mdio";
+			compatible = "gianfar";
+			reg = <24520 20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			linux,phandle = <24520>;
+			ethernet-phy@1 {
+				linux,phandle = <2452001>;
+				interrupt-parent = <700>;
+				interrupts = <13 2>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@4 {
+				linux,phandle = <2452004>;
+				interrupt-parent = <700>;
+				interrupts = <14 2>;
+				reg = <4>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		ethernet@24000 {
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <24000 1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <25 8 24 8 23 8>;
+			interrupt-parent = <700>;
+			phy-handle = <2452001>;
+		};
+
+		ethernet@25000 {
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <25000 1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <22 8 21 8 20 8>;
+			interrupt-parent = <700>;
+			phy-handle = <2452004>;
+		};
+
+		serial@4500 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4500 100>;
+			clock-frequency = <0>;
+			interrupts = <9 8>;
+			interrupt-parent = <700>;
+		};
+
+		serial@4600 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4600 100>;
+			clock-frequency = <0>;
+			interrupts = <a 8>;
+			interrupt-parent = <700>;
+		};
+
+		pci@8500 {
+			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map = <
+
+					/* IDSEL 0x0E -mini PCI */
+					 7000 0 0 1 700 12 8
+					 7000 0 0 2 700 12 8
+					 7000 0 0 3 700 12 8
+					 7000 0 0 4 700 12 8
+
+					/* IDSEL 0x0F - PCI slot */
+					 7800 0 0 1 700 11 8
+					 7800 0 0 2 700 12 8
+					 7800 0 0 3 700 11 8
+					 7800 0 0 4 700 12 8>;
+			interrupt-parent = <700>;
+			interrupts = <42 8>;
+			bus-range = <0 0>;
+			ranges = <02000000 0 90000000 90000000 0 10000000
+			          42000000 0 80000000 80000000 0 10000000
+			          01000000 0 00000000 e2000000 0 00100000>;
+			clock-frequency = <3f940aa>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <8500 100>;
+			compatible = "83xx";
+			device_type = "pci";
+		};
+
+		crypto@30000 {
+			device_type = "crypto";
+			model = "SEC2";
+			compatible = "talitos";
+			reg = <30000 7000>;
+			interrupts = <b 8>;
+			interrupt-parent = <700>;
+			/* Rev. 2.2 */
+			num-channels = <1>;
+			channel-fifo-len = <18>;
+			exec-units-mask = <0000004c>;
+			descriptor-types-mask = <0122003f>;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		pic@700 {
+			linux,phandle = <700>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <700 100>;
+			built-in;
+			device_type = "ipic";
+		};
+	};
+};

arch/powerpc/boot/dts/mpc8349emitxgp.dts

+/*
+ * MPC8349E-mITX-GP Device Tree Source
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+/ {
+	model = "MPC8349EMITXGP";
+	compatible = "MPC834xMITXGP";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8349@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <20>;
+			i-cache-line-size = <20>;
+			d-cache-size = <8000>;
+			i-cache-size = <8000>;
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+			32-bit;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <00000000 10000000>;
+	};
+
+	soc8349@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		device_type = "soc";
+		ranges = <0 e0000000 00100000>;
+		reg = <e0000000 00000200>;
+		bus-frequency = <0>;                    // from bootloader
+
+		wdt@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <200 100>;
+		};
+
+		i2c@3000 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3000 100>;
+			interrupts = <e 8>;
+			interrupt-parent = <700>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3100 100>;
+			interrupts = <f 8>;
+			interrupt-parent = <700>;
+			dfsrr;
+		};
+
+		spi@7000 {
+			device_type = "spi";
+			compatible = "mpc83xx_spi";
+			reg = <7000 1000>;
+			interrupts = <10 8>;
+			interrupt-parent = <700>;
+			mode = <0>;
+		};
+
+		usb@23000 {
+			device_type = "usb";
+			compatible = "fsl-usb2-dr";
+			reg = <23000 1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <700>;
+			interrupts = <26 2>;
+			dr_mode = "otg";
+			phy_type = "ulpi";
+		};
+
+		mdio@24520 {
+			device_type = "mdio";
+			compatible = "gianfar";
+			reg = <24520 20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			linux,phandle = <24520>;
+
+			/* Vitesse 8201 */
+			ethernet-phy@1c {
+				linux,phandle = <245201c>;
+				interrupt-parent = <700>;
+				interrupts = <12 2>;
+				reg = <1c>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		ethernet@24000 {
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <24000 1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <20 8 21 8 22 8>;
+			interrupt-parent = <700>;
+			phy-handle = <245201c>;
+		};
+
+		serial@4500 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4500 100>;
+			clock-frequency = <0>;		// from bootloader
+			interrupts = <9 8>;
+			interrupt-parent = <700>;
+		};
+
+		serial@4600 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4600 100>;
+			clock-frequency = <0>;		// from bootloader
+			interrupts = <a 8>;
+			interrupt-parent = <700>;
+		};
+
+		pci@8600 {
+			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map = <
+					/* IDSEL 0x0F - PCI Slot */
+					7800 0 0 1 700 14 8 /* PCI_INTA */
+					7800 0 0 2 700 15 8 /* PCI_INTB */
+					 >;
+			interrupt-parent = <700>;
+			interrupts = <43 8>;
+			bus-range = <1 1>;
+			ranges = <42000000 0 a0000000 a0000000 0 10000000
+				  02000000 0 b0000000 b0000000 0 10000000
+				  01000000 0 00000000 e3000000 0 01000000>;
+			clock-frequency = <3f940aa>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <8600 100>;
+			compatible = "83xx";
+			device_type = "pci";
+		};
+
+		crypto@30000 {
+			device_type = "crypto";
+			model = "SEC2";
+			compatible = "talitos";
+			reg = <30000 10000>;
+			interrupts = <b 8>;
+			interrupt-parent = <700>;
+			num-channels = <4>;
+			channel-fifo-len = <18>;
+			exec-units-mask = <0000007e>;
+			descriptor-types-mask = <01010ebf>;
+		};
+
+		pic@700 {
+			linux,phandle = <700>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <700 100>;
+			built-in;
+			device_type = "ipic";
+		};
+	};
+};

arch/powerpc/boot/dts/mpc8349emds.dts → arch/powerpc/boot/dts/mpc834x_mds.dts

@@ -39,6 +39,11 @@ memory {
 		reg = <00000000 10000000>;	// 256MB at 0
 	};
 
+	bcsr@e2400000 {
+		device_type = "board-control";
+		reg = <e2400000 8000>;
+	};
+
 	soc8349@e0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -103,6 +108,7 @@ usb@23000 {
 			#size-cells = <0>;
 			interrupt-parent = <700>;
 			interrupts = <26 2>;
+			dr_mode = "otg";
 			phy_type = "ulpi";
 		};
 

arch/powerpc/boot/dts/mpc8568mds.dts

+/*
+ * MPC8568E MDS Device Tree Source
+ *
+ * Copyright 2007 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+
+/*
+/memreserve/	00000000 1000000;
+*/
+
+/ {
+	model = "MPC8568EMDS";
+	compatible = "MPC85xxMDS";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	linux,phandle = <100>;
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		linux,phandle = <200>;
+
+		PowerPC,8568@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <20>;	// 32 bytes
+			i-cache-line-size = <20>;	// 32 bytes
+			d-cache-size = <8000>;		// L1, 32K
+			i-cache-size = <8000>;		// L1, 32K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			32-bit;
+			linux,phandle = <201>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		linux,phandle = <300>;
+		reg = <00000000 10000000>;
+	};
+
+	bcsr@f8000000 {
+		device_type = "board-control";
+		reg = <f8000000 8000>;
+	};
+
+	soc8568@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		device_type = "soc";
+		ranges = <0 e0000000 00100000>;
+		reg = <e0000000 00100000>;
+		bus-frequency = <0>;
+
+		i2c@3000 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3000 100>;
+			interrupts = <1b 2>;
+			interrupt-parent = <40000>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3100 100>;
+			interrupts = <1b 2>;
+			interrupt-parent = <40000>;
+			dfsrr;
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "mdio";
+			compatible = "gianfar";
+			reg = <24520 20>;
+			linux,phandle = <24520>;
+			ethernet-phy@0 {
+				linux,phandle = <2452000>;
+				interrupt-parent = <40000>;
+				interrupts = <31 1>;
+				reg = <0>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@1 {
+				linux,phandle = <2452001>;
+				interrupt-parent = <40000>;
+				interrupts = <32 1>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+
+			ethernet-phy@2 {
+				linux,phandle = <2452002>;
+				interrupt-parent = <40000>;
+				interrupts = <31 1>;
+				reg = <2>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@3 {
+				linux,phandle = <2452003>;
+				interrupt-parent = <40000>;
+				interrupts = <32 1>;
+				reg = <3>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <24000 1000>;
+			mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <d 2 e 2 12 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452002>;
+		};
+
+		ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <25000 1000>;
+			mac-address = [ 00 00 00 00 00 00];
+			interrupts = <13 2 14 2 18 2>;
+			interrupt-parent = <40000>;
+			phy-handle = <2452003>;
+		};
+
+		serial@4500 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4500 100>;
+			clock-frequency = <0>;
+			interrupts = <1a 2>;
+			interrupt-parent = <40000>;
+		};
+
+		serial@4600 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4600 100>;
+			clock-frequency = <0>;
+			interrupts = <1a 2>;
+			interrupt-parent = <40000>;
+		};
+
+		crypto@30000 {
+			device_type = "crypto";
+			model = "SEC2";
+			compatible = "talitos";
+			reg = <30000 f000>;
+			interrupts = <1d 2>;
+			interrupt-parent = <40000>;
+			num-channels = <4>;
+			channel-fifo-len = <18>;
+			exec-units-mask = <000000fe>;
+			descriptor-types-mask = <012b0ebf>;
+		};
+
+		pic@40000 {
+			linux,phandle = <40000>;
+			clock-frequency = <0>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <40000 40000>;
+			built-in;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+                        big-endian;
+		};
+		par_io@e0100 {
+			reg = <e0100 100>;
+			device_type = "par_io";
+			num-ports = <7>;
+
+			ucc_pin@01 {
+				linux,phandle = <e010001>;
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					4  0a  1  0  2  0 	/* TxD0 */
+					4  09  1  0  2  0 	/* TxD1 */
+					4  08  1  0  2  0 	/* TxD2 */
+					4  07  1  0  2  0 	/* TxD3 */
+					4  17  1  0  2  0 	/* TxD4 */
+					4  16  1  0  2  0 	/* TxD5 */
+					4  15  1  0  2  0 	/* TxD6 */
+					4  14  1  0  2  0 	/* TxD7 */
+					4  0f  2  0  2  0 	/* RxD0 */
+					4  0e  2  0  2  0 	/* RxD1 */
+					4  0d  2  0  2  0 	/* RxD2 */
+					4  0c  2  0  2  0 	/* RxD3 */
+					4  1d  2  0  2  0 	/* RxD4 */
+					4  1c  2  0  2  0 	/* RxD5 */
+					4  1b  2  0  2  0 	/* RxD6 */
+					4  1a  2  0  2  0 	/* RxD7 */
+					4  0b  1  0  2  0 	/* TX_EN */
+					4  18  1  0  2  0 	/* TX_ER */
+					4  0f  2  0  2  0 	/* RX_DV */
+					4  1e  2  0  2  0 	/* RX_ER */
+					4  11  2  0  2  0 	/* RX_CLK */
+					4  13  1  0  2  0 	/* GTX_CLK */
+					1  1f  2  0  3  0>;	/* GTX125 */
+			};
+			ucc_pin@02 {
+				linux,phandle = <e010002>;
+				pio-map = <
+			/* port  pin  dir  open_drain  assignment  has_irq */
+					5  0a 1  0  2  0   /* TxD0 */
+					5  09 1  0  2  0   /* TxD1 */
+					5  08 1  0  2  0   /* TxD2 */
+					5  07 1  0  2  0   /* TxD3 */
+					5  17 1  0  2  0   /* TxD4 */
+					5  16 1  0  2  0   /* TxD5 */
+					5  15 1  0  2  0   /* TxD6 */
+					5  14 1  0  2  0   /* TxD7 */
+					5  0f 2  0  2  0   /* RxD0 */
+					5  0e 2  0  2  0   /* RxD1 */
+					5  0d 2  0  2  0   /* RxD2 */
+					5  0c 2  0  2  0   /* RxD3 */
+					5  1d 2  0  2  0   /* RxD4 */
+					5  1c 2  0  2  0   /* RxD5 */
+					5  1b 2  0  2  0   /* RxD6 */
+					5  1a 2  0  2  0   /* RxD7 */
+					5  0b 1  0  2  0   /* TX_EN */
+					5  18 1  0  2  0   /* TX_ER */
+					5  10 2  0  2  0   /* RX_DV */
+					5  1e 2  0  2  0   /* RX_ER */
+					5  11 2  0  2  0   /* RX_CLK */
+					5  13 1  0  2  0   /* GTX_CLK */
+					1  1f 2  0  3  0   /* GTX125 */
+					4  06 3  0  2  0   /* MDIO */
+					4  05 1  0  2  0>; /* MDC */
+			};
+		};
+	};
+
+	qe@e0080000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "qe";
+		model = "QE";
+		ranges = <0 e0080000 00040000>;
+		reg = <e0080000 480>;
+		brg-frequency = <0>;
+		bus-frequency = <179A7B00>;
+
+		muram@10000 {
+			device_type = "muram";
+			ranges = <0 00010000 0000c000>;
+
+			data-only@0{
+				reg = <0 c000>;
+			};
+		};
+
+		spi@4c0 {
+			device_type = "spi";
+			compatible = "fsl_spi";
+			reg = <4c0 40>;
+			interrupts = <2>;
+			interrupt-parent = <80>;
+			mode = "cpu";
+		};
+
+		spi@500 {
+			device_type = "spi";
+			compatible = "fsl_spi";
+			reg = <500 40>;
+			interrupts = <1>;
+			interrupt-parent = <80>;
+			mode = "cpu";
+		};
+
+		ucc@2000 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			model = "UCC";
+			device-id = <1>;
+			reg = <2000 200>;
+			interrupts = <20>;
+			interrupt-parent = <80>;
+			mac-address = [ 00 04 9f 00 23 23 ];
+			rx-clock = <0>;
+			tx-clock = <19>;
+			phy-handle = <212000>;
+			pio-handle = <e010001>;
+		};
+
+		ucc@3000 {
+			device_type = "network";
+			compatible = "ucc_geth";
+			model = "UCC";
+			device-id = <2>;
+			reg = <3000 200>;
+			interrupts = <21>;
+			interrupt-parent = <80>;
+			mac-address = [ 00 11 22 33 44 55 ];
+			rx-clock = <0>;
+			tx-clock = <14>;
+			phy-handle = <212001>;
+			pio-handle = <e010002>;
+		};
+
+		mdio@2120 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2120 18>;
+			device_type = "mdio";
+			compatible = "ucc_geth_phy";
+
+			/* These are the same PHYs as on
+			 * gianfar's MDIO bus */
+			ethernet-phy@00 {
+				linux,phandle = <212000>;
+				interrupt-parent = <40000>;
+				interrupts = <31 1>;
+				reg = <0>;
+				device_type = "ethernet-phy";
+				interface = <6>; //ENET_1000_GMII
+			};
+			ethernet-phy@01 {
+				linux,phandle = <212001>;
+				interrupt-parent = <40000>;
+				interrupts = <32 1>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+				interface = <6>;
+			};
+			ethernet-phy@02 {
+				linux,phandle = <212002>;
+				interrupt-parent = <40000>;
+				interrupts = <31 1>;
+				reg = <2>;
+				device_type = "ethernet-phy";
+				interface = <6>; //ENET_1000_GMII
+			};
+			ethernet-phy@03 {
+				linux,phandle = <212003>;
+				interrupt-parent = <40000>;
+				interrupts = <32 1>;
+				reg = <3>;
+				device_type = "ethernet-phy";
+				interface = <6>; //ENET_1000_GMII
+			};
+		};
+
+		qeic@80 {
+			linux,phandle = <80>;
+			interrupt-controller;
+			device_type = "qeic";
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			reg = <80 80>;
+			built-in;
+			big-endian;
+			interrupts = <1e 2 1e 2>; //high:30 low:30
+			interrupt-parent = <40000>;
+		};
+
+	};
+};

arch/powerpc/configs/linkstation_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc5
-# Mon Jan 22 22:17:58 2007
+# Linux kernel version: 2.6.20-rc6
+# Sun Jan 28 23:13:56 2007
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
@@ -58,7 +58,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
 #
 # General setup
 #
-CONFIG_LOCALVERSION="-kuroboxHG"
+CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
@@ -206,7 +206,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-# CONFIG_SECCOMP is not set
+CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
 #
@@ -312,39 +312,40 @@ CONFIG_NF_CONNTRACK=m
 # CONFIG_NF_CT_ACCT is not set
 # CONFIG_NF_CONNTRACK_MARK is not set
 # CONFIG_NF_CONNTRACK_EVENTS is not set
-# CONFIG_NF_CT_PROTO_SCTP is not set
-# CONFIG_NF_CONNTRACK_AMANDA is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CONNTRACK_AMANDA=m
 CONFIG_NF_CONNTRACK_FTP=m
-# CONFIG_NF_CONNTRACK_H323 is not set
+CONFIG_NF_CONNTRACK_H323=m
 CONFIG_NF_CONNTRACK_IRC=m
-# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
-# CONFIG_NF_CONNTRACK_PPTP is not set
-# CONFIG_NF_CONNTRACK_SIP is not set
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NETFILTER_XTABLES=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-CONFIG_NETFILTER_XT_TARGET_MARK=m
+# CONFIG_NETFILTER_XT_TARGET_MARK is not set
 # CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
 # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
 # CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
 # CONFIG_NETFILTER_XT_MATCH_DCCP is not set
 # CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+# CONFIG_NETFILTER_XT_MATCH_ESP is not set
+# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
+# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
 CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
+# CONFIG_NETFILTER_XT_MATCH_MARK is not set
 # CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
 # CONFIG_NETFILTER_XT_MATCH_REALM is not set
 # CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATE is not set
+CONFIG_NETFILTER_XT_MATCH_STATE=m
 # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
 # CONFIG_NETFILTER_XT_MATCH_STRING is not set
 # CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
@@ -359,12 +360,12 @@ CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_IPRANGE=m
 # CONFIG_IP_NF_MATCH_TOS is not set
-# CONFIG_IP_NF_MATCH_RECENT is not set
+CONFIG_IP_NF_MATCH_RECENT=m
 # CONFIG_IP_NF_MATCH_ECN is not set
 # CONFIG_IP_NF_MATCH_AH is not set
 # CONFIG_IP_NF_MATCH_TTL is not set
-# CONFIG_IP_NF_MATCH_OWNER is not set
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 # CONFIG_IP_NF_TARGET_LOG is not set
@@ -374,16 +375,17 @@ CONFIG_NF_NAT=m
 CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
+# CONFIG_IP_NF_TARGET_NETMAP is not set
+# CONFIG_IP_NF_TARGET_SAME is not set
 # CONFIG_NF_NAT_SNMP_BASIC is not set
+CONFIG_NF_NAT_PROTO_GRE=m
 CONFIG_NF_NAT_FTP=m
 CONFIG_NF_NAT_IRC=m
 CONFIG_NF_NAT_TFTP=m
-# CONFIG_NF_NAT_AMANDA is not set
-# CONFIG_NF_NAT_PPTP is not set
-# CONFIG_NF_NAT_H323 is not set
-# CONFIG_NF_NAT_SIP is not set
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_TOS=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -472,6 +474,7 @@ CONFIG_MTD_PARTITIONS=y
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
@@ -518,6 +521,7 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_MTD_PHYSMAP_START=0xffc00000
 CONFIG_MTD_PHYSMAP_LEN=0x400000
 CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_PHYSMAP_OF is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -540,6 +544,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1
 # NAND Flash Device Drivers
 #
 # CONFIG_MTD_NAND is not set
+# CONFIG_MTD_NAND_CAFE is not set
 
 #
 # OneNAND Flash Device Drivers
@@ -696,7 +701,7 @@ CONFIG_ATA=y
 # CONFIG_PATA_HPT37X is not set
 # CONFIG_PATA_HPT3X2N is not set
 # CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
+CONFIG_PATA_IT821X=y
 # CONFIG_PATA_JMICRON is not set
 # CONFIG_PATA_TRIFLEX is not set
 # CONFIG_PATA_MARVELL is not set
@@ -763,11 +768,33 @@ CONFIG_TUN=m
 #
 # PHY device support
 #
+# CONFIG_PHYLIB is not set
 
 #
 # Ethernet (10 or 100Mbit)
 #
-# CONFIG_NET_ETHERNET is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+
+#
+# Tulip family network device support
+#
+CONFIG_NET_TULIP=y
+# CONFIG_DE2104X is not set
+CONFIG_TULIP=y
+# CONFIG_TULIP_MWI is not set
+CONFIG_TULIP_MMIO=y
+# CONFIG_TULIP_NAPI is not set
+# CONFIG_DE4X5 is not set
+# CONFIG_WINBOND_840 is not set
+# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_PCI is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -829,7 +856,8 @@ CONFIG_NET_RADIO=y
 # CONFIG_USB_ZD1201 is not set
 # CONFIG_HOSTAP is not set
 # CONFIG_BCM43XX is not set
-# CONFIG_ZD1211RW is not set
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
 CONFIG_NET_WIRELESS=y
 
 #
@@ -1098,7 +1126,7 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # HID Devices
 #
-CONFIG_HID=y
+CONFIG_HID=m
 
 #
 # USB support
@@ -1115,7 +1143,6 @@ CONFIG_USB=y
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_MULTITHREAD_PROBE is not set
 # CONFIG_USB_OTG is not set
 
 #
@@ -1136,7 +1163,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # USB Device Class drivers
 #
 # CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
+CONFIG_USB_PRINTER=m
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1371,7 +1398,11 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_SECURITY is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
@@ -1461,7 +1492,12 @@ CONFIG_SUNRPC_GSS=y
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1495,7 +1531,7 @@ CONFIG_NLS_CODEPAGE_437=m
 # CONFIG_NLS_CODEPAGE_869 is not set
 # CONFIG_NLS_CODEPAGE_936 is not set
 # CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
+CONFIG_NLS_CODEPAGE_932=m
 # CONFIG_NLS_CODEPAGE_949 is not set
 # CONFIG_NLS_CODEPAGE_874 is not set
 # CONFIG_NLS_ISO8859_8 is not set
@@ -1526,12 +1562,14 @@ CONFIG_NLS_UTF8=m
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
+CONFIG_CRC_CCITT=m
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
 CONFIG_PLIST=y
 CONFIG_IOMAP_COPY=y
 

arch/powerpc/configs/mpc834x_mds_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc5
-# Fri Jan 26 00:19:27 2007
+# Linux kernel version: 2.6.20
+# Thu Feb  8 01:00:48 2007
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
@@ -34,9 +34,9 @@ CONFIG_DEFAULT_UIMAGE=y
 CONFIG_PPC_83xx=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_86xx is not set
+# CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
-# CONFIG_8xx is not set
 # CONFIG_E200 is not set
 CONFIG_6xx=y
 CONFIG_83xx=y
@@ -128,8 +128,9 @@ CONFIG_PPC_GEN550=y
 #
 # Platform support
 #
+# CONFIG_MPC8313_RDB is not set
 # CONFIG_MPC832x_MDS is not set
-CONFIG_MPC834x_SYS=y
+CONFIG_MPC834x_MDS=y
 # CONFIG_MPC834x_ITX is not set
 # CONFIG_MPC8360E_PB is not set
 CONFIG_MPC834x=y

arch/powerpc/kernel/btext.c

@@ -18,6 +18,7 @@
 #include <asm/io.h>
 #include <asm/lmb.h>
 #include <asm/processor.h>
+#include <asm/udbg.h>
 
 #define NO_SCROLL
 
@@ -912,3 +913,11 @@ static unsigned char vga_font[cmapsz] = {
 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 0x00, 0x00, 0x00, 0x00,
 };
+
+void __init udbg_init_btext(void)
+{
+	/* If btext is enabled, we might have a BAT setup for early display,
+	 * thus we do enable some very basic udbg output
+	 */
+	udbg_putc = btext_drawchar;
+}