Merge remote-tracking branches 'asoc/fix/audmux', 'asoc/fix/cs42l52',...

Merge remote-tracking branches 'asoc/fix/audmux', 'asoc/fix/cs42l52', 'asoc/fix/fsl-esai', 'asoc/fix/fsl-spdif', 'asoc/fix/rcar', 'asoc/fix/tlv320aic31xx' and 'asoc/fix/wm8962' into asoc-linus

Documentation/devicetree/bindings/sound/tlv320aic31xx.txt

@@ -13,6 +13,9 @@ Required properties:
     "ti,tlv320aic3111" - TLV320AIC3111 (stereo speaker amp, MiniDSP)
 
 - reg - <int> -  I2C slave address
+- HPVDD-supply, SPRVDD-supply, SPLVDD-supply, AVDD-supply, IOVDD-supply,
+  DVDD-supply : power supplies for the device as covered in
+  Documentation/devicetree/bindings/regulator/regulator.txt
 
 
 Optional properties:
@@ -24,9 +27,6 @@ Optional properties:
         3 or MICBIAS_AVDD - MICBIAS output is connected to AVDD
 	If this node is not mentioned or if the value is unknown, then
 	micbias	is set to 2.0V.
-- HPVDD-supply, SPRVDD-supply, SPLVDD-supply, AVDD-supply, IOVDD-supply,
-  DVDD-supply : power supplies for the device as covered in
-  Documentation/devicetree/bindings/regulator/regulator.txt
 
 CODEC output pins:
   * HPL

sound/soc/codecs/cs42l52.c

@@ -1229,8 +1229,10 @@ static int cs42l52_i2c_probe(struct i2c_client *i2c_client,
 	}
 
 	if (cs42l52->pdata.reset_gpio) {
-		ret = gpio_request_one(cs42l52->pdata.reset_gpio,
-				       GPIOF_OUT_INIT_HIGH, "CS42L52 /RST");
+		ret = devm_gpio_request_one(&i2c_client->dev,
+					    cs42l52->pdata.reset_gpio,
+					    GPIOF_OUT_INIT_HIGH,
+					    "CS42L52 /RST");
 		if (ret < 0) {
 			dev_err(&i2c_client->dev, "Failed to request /RST %d: %d\n",
 				cs42l52->pdata.reset_gpio, ret);

sound/soc/codecs/tlv320aic31xx.c

@@ -376,7 +376,7 @@ static int aic31xx_dapm_power_event(struct snd_soc_dapm_widget *w,
 		reg = AIC31XX_ADCFLAG;
 		break;
 	default:
-		dev_err(w->codec->dev, "Unknown widget '%s' calling %s/n",
+		dev_err(w->codec->dev, "Unknown widget '%s' calling %s\n",
 			w->name, __func__);
 		return -EINVAL;
 	}

sound/soc/codecs/wm8962.c

@@ -154,6 +154,7 @@ static struct reg_default wm8962_reg[] = {
 	{ 40, 0x0000 },   /* R40    - SPKOUTL volume */
 	{ 41, 0x0000 },   /* R41    - SPKOUTR volume */
 
+	{ 49, 0x0010 },   /* R49    - Class D Control 1 */
 	{ 51, 0x0003 },   /* R51    - Class D Control 2 */
 
 	{ 56, 0x0506 },   /* R56    - Clocking 4 */
@@ -795,7 +796,6 @@ static bool wm8962_volatile_register(struct device *dev, unsigned int reg)
 	case WM8962_ALC2:
 	case WM8962_THERMAL_SHUTDOWN_STATUS:
 	case WM8962_ADDITIONAL_CONTROL_4:
-	case WM8962_CLASS_D_CONTROL_1:
 	case WM8962_DC_SERVO_6:
 	case WM8962_INTERRUPT_STATUS_1:
 	case WM8962_INTERRUPT_STATUS_2:
@@ -2929,13 +2929,22 @@ static int wm8962_set_fll(struct snd_soc_codec *codec, int fll_id, int source,
 static int wm8962_mute(struct snd_soc_dai *dai, int mute)
 {
 	struct snd_soc_codec *codec = dai->codec;
-	int val;
+	int val, ret;
 
 	if (mute)
-		val = WM8962_DAC_MUTE;
+		val = WM8962_DAC_MUTE | WM8962_DAC_MUTE_ALT;
 	else
 		val = 0;
 
+	/**
+	 * The DAC mute bit is mirrored in two registers, update both to keep
+	 * the register cache consistent.
+	 */
+	ret = snd_soc_update_bits(codec, WM8962_CLASS_D_CONTROL_1,
+				  WM8962_DAC_MUTE_ALT, val);
+	if (ret < 0)
+		return ret;
+
 	return snd_soc_update_bits(codec, WM8962_ADC_DAC_CONTROL_1,
 				   WM8962_DAC_MUTE, val);
 }

sound/soc/codecs/wm8962.h

@@ -1954,6 +1954,10 @@
 #define WM8962_SPKOUTL_ENA_MASK                 0x0040  /* SPKOUTL_ENA */
 #define WM8962_SPKOUTL_ENA_SHIFT                     6  /* SPKOUTL_ENA */
 #define WM8962_SPKOUTL_ENA_WIDTH                     1  /* SPKOUTL_ENA */
+#define WM8962_DAC_MUTE_ALT                     0x0010  /* DAC_MUTE */
+#define WM8962_DAC_MUTE_ALT_MASK                0x0010  /* DAC_MUTE */
+#define WM8962_DAC_MUTE_ALT_SHIFT                    4  /* DAC_MUTE */
+#define WM8962_DAC_MUTE_ALT_WIDTH                    1  /* DAC_MUTE */
 #define WM8962_SPKOUTL_PGA_MUTE                 0x0002  /* SPKOUTL_PGA_MUTE */
 #define WM8962_SPKOUTL_PGA_MUTE_MASK            0x0002  /* SPKOUTL_PGA_MUTE */
 #define WM8962_SPKOUTL_PGA_MUTE_SHIFT                1  /* SPKOUTL_PGA_MUTE */

sound/soc/fsl/fsl_esai.c

@@ -258,10 +258,16 @@ static int fsl_esai_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id,
 		return -EINVAL;
 	}
 
-	if (ratio == 1) {
+	/* Only EXTAL source can be output directly without using PSR and PM */
+	if (ratio == 1 && clksrc == esai_priv->extalclk) {
 		/* Bypass all the dividers if not being needed */
 		ecr |= tx ? ESAI_ECR_ETO : ESAI_ECR_ERO;
 		goto out;
+	} else if (ratio < 2) {
+		/* The ratio should be no less than 2 if using other sources */
+		dev_err(dai->dev, "failed to derive required HCK%c rate\n",
+				tx ? 'T' : 'R');
+		return -EINVAL;
 	}
 
 	ret = fsl_esai_divisor_cal(dai, tx, ratio, false, 0);
@@ -307,7 +313,8 @@ static int fsl_esai_set_bclk(struct snd_soc_dai *dai, bool tx, u32 freq)
 		return -EINVAL;
 	}
 
-	if (esai_priv->sck_div[tx] && (ratio > 16 || ratio == 0)) {
+	/* The ratio should be contented by FP alone if bypassing PM and PSR */
+	if (!esai_priv->sck_div[tx] && (ratio > 16 || ratio == 0)) {
 		dev_err(dai->dev, "the ratio is out of range (1 ~ 16)\n");
 		return -EINVAL;
 	}
@@ -454,12 +461,6 @@ static int fsl_esai_startup(struct snd_pcm_substream *substream,
 	}
 
 	if (!dai->active) {
-		/* Reset Port C */
-		regmap_update_bits(esai_priv->regmap, REG_ESAI_PRRC,
-				   ESAI_PRRC_PDC_MASK, ESAI_PRRC_PDC(ESAI_GPIO));
-		regmap_update_bits(esai_priv->regmap, REG_ESAI_PCRC,
-				   ESAI_PCRC_PC_MASK, ESAI_PCRC_PC(ESAI_GPIO));
-
 		/* Set synchronous mode */
 		regmap_update_bits(esai_priv->regmap, REG_ESAI_SAICR,
 				   ESAI_SAICR_SYNC, esai_priv->synchronous ?
@@ -519,6 +520,11 @@ static int fsl_esai_hw_params(struct snd_pcm_substream *substream,
 
 	regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx), mask, val);
 
+	/* Remove ESAI personal reset by configuring ESAI_PCRC and ESAI_PRRC */
+	regmap_update_bits(esai_priv->regmap, REG_ESAI_PRRC,
+			   ESAI_PRRC_PDC_MASK, ESAI_PRRC_PDC(ESAI_GPIO));
+	regmap_update_bits(esai_priv->regmap, REG_ESAI_PCRC,
+			   ESAI_PCRC_PC_MASK, ESAI_PCRC_PC(ESAI_GPIO));
 	return 0;
 }
 

sound/soc/fsl/fsl_spdif.h

@@ -144,8 +144,8 @@ enum spdif_gainsel {
 
 /* SPDIF Clock register */
 #define STC_SYSCLK_DIV_OFFSET		11
-#define STC_SYSCLK_DIV_MASK		(0x1ff << STC_TXCLK_SRC_OFFSET)
-#define STC_SYSCLK_DIV(x)		((((x) - 1) << STC_TXCLK_DIV_OFFSET) & STC_SYSCLK_DIV_MASK)
+#define STC_SYSCLK_DIV_MASK		(0x1ff << STC_SYSCLK_DIV_OFFSET)
+#define STC_SYSCLK_DIV(x)		((((x) - 1) << STC_SYSCLK_DIV_OFFSET) & STC_SYSCLK_DIV_MASK)
 #define STC_TXCLK_SRC_OFFSET		8
 #define STC_TXCLK_SRC_MASK		(0x7 << STC_TXCLK_SRC_OFFSET)
 #define STC_TXCLK_SRC_SET(x)		((x << STC_TXCLK_SRC_OFFSET) & STC_TXCLK_SRC_MASK)

sound/soc/sh/rcar/core.c

@@ -197,13 +197,12 @@ static void rsnd_dma_complete(void *data)
 	 * rsnd_dai_pointer_update() will be called twice,
 	 * ant it will breaks io->byte_pos
 	 */
-
-	rsnd_dai_pointer_update(io, io->byte_per_period);
-
 	if (dma->submit_loop)
 		rsnd_dma_continue(dma);
 
 	rsnd_unlock(priv, flags);
+
+	rsnd_dai_pointer_update(io, io->byte_per_period);
 }
 
 static void __rsnd_dma_start(struct rsnd_dma *dma)

sound/soc/sh/rcar/src.c

@@ -258,7 +258,7 @@ static int rsnd_src_init(struct rsnd_mod *mod,
 {
 	struct rsnd_src *src = rsnd_mod_to_src(mod);
 
-	clk_enable(src->clk);
+	clk_prepare_enable(src->clk);
 
 	return 0;
 }
@@ -269,7 +269,7 @@ static int rsnd_src_quit(struct rsnd_mod *mod,
 {
 	struct rsnd_src *src = rsnd_mod_to_src(mod);
 
-	clk_disable(src->clk);
+	clk_disable_unprepare(src->clk);
 
 	return 0;
 }

sound/soc/sh/rcar/ssi.c

@@ -171,7 +171,7 @@ static void rsnd_ssi_hw_start(struct rsnd_ssi *ssi,
 	u32 cr;
 
 	if (0 == ssi->usrcnt) {
-		clk_enable(ssi->clk);
+		clk_prepare_enable(ssi->clk);
 
 		if (rsnd_dai_is_clk_master(rdai)) {
 			if (rsnd_ssi_clk_from_parent(ssi))
@@ -230,7 +230,7 @@ static void rsnd_ssi_hw_stop(struct rsnd_ssi *ssi,
 				rsnd_ssi_master_clk_stop(ssi);
 		}
 
-		clk_disable(ssi->clk);
+		clk_disable_unprepare(ssi->clk);
 	}
 
 	dev_dbg(dev, "ssi%d hw stopped\n", rsnd_mod_id(&ssi->mod));