Commit fab5669d authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 RAS changes from Ingo Molnar:

 - SCI reporting for other error types not only correctable ones

 - GHES cleanups

 - Add the functionality to override error reporting agents as some
   machines are sporting a new extended error logging capability which,
   if done properly in the BIOS, makes a corresponding EDAC module
   redundant

 - PCIe AER tracepoint severity levels fix

 - Error path correction for the mce device init

 - MCE timer fix

 - Add more flexibility to the error injection (EINJ) debugfs interface

* 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, mce: Fix mce_start_timer semantics
  ACPI, APEI, GHES: Cleanup ghes memory error handling
  ACPI, APEI: Cleanup alignment-aware accesses
  ACPI, APEI, GHES: Do not report only correctable errors with SCI
  ACPI, APEI, EINJ: Changes to the ACPI/APEI/EINJ debugfs interface
  ACPI, eMCA: Combine eMCA/EDAC event reporting priority
  EDAC, sb_edac: Modify H/W event reporting policy
  EDAC: Add an edac_report parameter to EDAC
  PCI, AER: Fix severity usage in aer trace event
  x86, mce: Call put_device on device_register failure
parents 74e8ee82 b769e014
......@@ -45,11 +45,22 @@ directory apei/einj. The following files are provided.
injection. Before this, please specify all necessary error
parameters.
- flags
Present for kernel version 3.13 and above. Used to specify which
of param{1..4} are valid and should be used by BIOS during injection.
Value is a bitmask as specified in ACPI5.0 spec for the
SET_ERROR_TYPE_WITH_ADDRESS data structure:
Bit 0 - Processor APIC field valid (see param3 below)
Bit 1 - Memory address and mask valid (param1 and param2)
Bit 2 - PCIe (seg,bus,dev,fn) valid (param4 below)
If set to zero, legacy behaviour is used where the type of injection
specifies just one bit set, and param1 is multiplexed.
- param1
This file is used to set the first error parameter value. Effect of
parameter depends on error_type specified. For example, if error
type is memory related type, the param1 should be a valid physical
memory address.
memory address. [Unless "flag" is set - see above]
- param2
This file is used to set the second error parameter value. Effect of
......@@ -58,6 +69,12 @@ directory apei/einj. The following files are provided.
address mask. Linux requires page or narrower granularity, say,
0xfffffffffffff000.
- param3
Used when the 0x1 bit is set in "flag" to specify the APIC id
- param4
Used when the 0x4 bit is set in "flag" to specify target PCIe device
- notrigger
The EINJ mechanism is a two step process. First inject the error, then
perform some actions to trigger it. Setting "notrigger" to 1 skips the
......
......@@ -890,6 +890,14 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
The xen output can only be used by Xen PV guests.
edac_report= [HW,EDAC] Control how to report EDAC event
Format: {"on" | "off" | "force"}
on: enable EDAC to report H/W event. May be overridden
by other higher priority error reporting module.
off: disable H/W event reporting through EDAC.
force: enforce the use of EDAC to report H/W event.
default: on.
ekgdboc= [X86,KGDB] Allow early kernel console debugging
ekgdboc=kbd
......
......@@ -33,22 +33,28 @@
#include <linux/acpi.h>
#include <linux/cper.h>
#include <acpi/apei.h>
#include <acpi/ghes.h>
#include <asm/mce.h>
#include "mce-internal.h"
void apei_mce_report_mem_error(int corrected, struct cper_sec_mem_err *mem_err)
void apei_mce_report_mem_error(int severity, struct cper_sec_mem_err *mem_err)
{
struct mce m;
/* Only corrected MC is reported */
if (!corrected || !(mem_err->validation_bits & CPER_MEM_VALID_PA))
if (!(mem_err->validation_bits & CPER_MEM_VALID_PA))
return;
mce_setup(&m);
m.bank = 1;
/* Fake a memory read corrected error with unknown channel */
/* Fake a memory read error with unknown channel */
m.status = MCI_STATUS_VAL | MCI_STATUS_EN | MCI_STATUS_ADDRV | 0x9f;
if (severity >= GHES_SEV_RECOVERABLE)
m.status |= MCI_STATUS_UC;
if (severity >= GHES_SEV_PANIC)
m.status |= MCI_STATUS_PCC;
m.addr = mem_err->physical_addr;
mce_log(&m);
mce_notify_irq();
......
......@@ -1638,15 +1638,15 @@ static void __mcheck_cpu_init_vendor(struct cpuinfo_x86 *c)
static void mce_start_timer(unsigned int cpu, struct timer_list *t)
{
unsigned long iv = mce_adjust_timer(check_interval * HZ);
__this_cpu_write(mce_next_interval, iv);
unsigned long iv = check_interval * HZ;
if (mca_cfg.ignore_ce || !iv)
return;
per_cpu(mce_next_interval, cpu) = iv;
t->expires = round_jiffies(jiffies + iv);
add_timer_on(t, smp_processor_id());
add_timer_on(t, cpu);
}
static void __mcheck_cpu_init_timer(void)
......@@ -2272,8 +2272,10 @@ static int mce_device_create(unsigned int cpu)
dev->release = &mce_device_release;
err = device_register(dev);
if (err)
if (err) {
put_device(dev);
return err;
}
for (i = 0; mce_device_attrs[i]; i++) {
err = device_create_file(dev, mce_device_attrs[i]);
......
......@@ -12,6 +12,7 @@
#include <acpi/acpi_bus.h>
#include <linux/cper.h>
#include <linux/ratelimit.h>
#include <linux/edac.h>
#include <asm/cpu.h>
#include <asm/mce.h>
......@@ -43,6 +44,8 @@ struct extlog_l1_head {
u8 rev1[12];
};
static int old_edac_report_status;
static u8 extlog_dsm_uuid[] = "663E35AF-CC10-41A4-88EA-5470AF055295";
/* L1 table related physical address */
......@@ -150,7 +153,7 @@ static int extlog_print(struct notifier_block *nb, unsigned long val,
rc = print_extlog_rcd(NULL, (struct acpi_generic_status *)elog_buf, cpu);
return NOTIFY_DONE;
return NOTIFY_STOP;
}
static int extlog_get_dsm(acpi_handle handle, int rev, int func, u64 *ret)
......@@ -231,8 +234,12 @@ static int __init extlog_init(void)
u64 cap;
int rc;
rc = -ENODEV;
if (get_edac_report_status() == EDAC_REPORTING_FORCE) {
pr_warn("Not loading eMCA, error reporting force-enabled through EDAC.\n");
return -EPERM;
}
rc = -ENODEV;
rdmsrl(MSR_IA32_MCG_CAP, cap);
if (!(cap & MCG_ELOG_P))
return rc;
......@@ -287,6 +294,12 @@ static int __init extlog_init(void)
if (elog_buf == NULL)
goto err_release_elog;
/*
* eMCA event report method has higher priority than EDAC method,
* unless EDAC event report method is mandatory.
*/
old_edac_report_status = get_edac_report_status();
set_edac_report_status(EDAC_REPORTING_DISABLED);
mce_register_decode_chain(&extlog_mce_dec);
/* enable OS to be involved to take over management from BIOS */
((struct extlog_l1_head *)extlog_l1_addr)->flags |= FLAG_OS_OPTIN;
......@@ -308,6 +321,7 @@ static int __init extlog_init(void)
static void __exit extlog_exit(void)
{
set_edac_report_status(old_edac_report_status);
mce_unregister_decode_chain(&extlog_mce_dec);
((struct extlog_l1_head *)extlog_l1_addr)->flags &= ~FLAG_OS_OPTIN;
if (extlog_l1_addr)
......
......@@ -41,6 +41,7 @@
#include <linux/rculist.h>
#include <linux/interrupt.h>
#include <linux/debugfs.h>
#include <asm/unaligned.h>
#include "apei-internal.h"
......@@ -567,8 +568,7 @@ static int apei_check_gar(struct acpi_generic_address *reg, u64 *paddr,
bit_offset = reg->bit_offset;
access_size_code = reg->access_width;
space_id = reg->space_id;
/* Handle possible alignment issues */
memcpy(paddr, &reg->address, sizeof(*paddr));
*paddr = get_unaligned(&reg->address);
if (!*paddr) {
pr_warning(FW_BUG APEI_PFX
"Invalid physical address in GAR [0x%llx/%u/%u/%u/%u]\n",
......
......@@ -34,6 +34,7 @@
#include <linux/delay.h>
#include <linux/mm.h>
#include <acpi/acpi.h>
#include <asm/unaligned.h>
#include "apei-internal.h"
......@@ -216,7 +217,7 @@ static void check_vendor_extension(u64 paddr,
static void *einj_get_parameter_address(void)
{
int i;
u64 paddrv4 = 0, paddrv5 = 0;
u64 pa_v4 = 0, pa_v5 = 0;
struct acpi_whea_header *entry;
entry = EINJ_TAB_ENTRY(einj_tab);
......@@ -225,30 +226,28 @@ static void *einj_get_parameter_address(void)
entry->instruction == ACPI_EINJ_WRITE_REGISTER &&
entry->register_region.space_id ==
ACPI_ADR_SPACE_SYSTEM_MEMORY)
memcpy(&paddrv4, &entry->register_region.address,
sizeof(paddrv4));
pa_v4 = get_unaligned(&entry->register_region.address);
if (entry->action == ACPI_EINJ_SET_ERROR_TYPE_WITH_ADDRESS &&
entry->instruction == ACPI_EINJ_WRITE_REGISTER &&
entry->register_region.space_id ==
ACPI_ADR_SPACE_SYSTEM_MEMORY)
memcpy(&paddrv5, &entry->register_region.address,
sizeof(paddrv5));
pa_v5 = get_unaligned(&entry->register_region.address);
entry++;
}
if (paddrv5) {
if (pa_v5) {
struct set_error_type_with_address *v5param;
v5param = acpi_os_map_memory(paddrv5, sizeof(*v5param));
v5param = acpi_os_map_memory(pa_v5, sizeof(*v5param));
if (v5param) {
acpi5 = 1;
check_vendor_extension(paddrv5, v5param);
check_vendor_extension(pa_v5, v5param);
return v5param;
}
}
if (param_extension && paddrv4) {
if (param_extension && pa_v4) {
struct einj_parameter *v4param;
v4param = acpi_os_map_memory(paddrv4, sizeof(*v4param));
v4param = acpi_os_map_memory(pa_v4, sizeof(*v4param));
if (!v4param)
return NULL;
if (v4param->reserved1 || v4param->reserved2) {
......@@ -416,7 +415,8 @@ static int __einj_error_trigger(u64 trigger_paddr, u32 type,
return rc;
}
static int __einj_error_inject(u32 type, u64 param1, u64 param2)
static int __einj_error_inject(u32 type, u32 flags, u64 param1, u64 param2,
u64 param3, u64 param4)
{
struct apei_exec_context ctx;
u64 val, trigger_paddr, timeout = FIRMWARE_TIMEOUT;
......@@ -446,6 +446,12 @@ static int __einj_error_inject(u32 type, u64 param1, u64 param2)
break;
}
v5param->flags = vendor_flags;
} else if (flags) {
v5param->flags = flags;
v5param->memory_address = param1;
v5param->memory_address_range = param2;
v5param->apicid = param3;
v5param->pcie_sbdf = param4;
} else {
switch (type) {
case ACPI_EINJ_PROCESSOR_CORRECTABLE:
......@@ -514,11 +520,17 @@ static int __einj_error_inject(u32 type, u64 param1, u64 param2)
}
/* Inject the specified hardware error */
static int einj_error_inject(u32 type, u64 param1, u64 param2)
static int einj_error_inject(u32 type, u32 flags, u64 param1, u64 param2,
u64 param3, u64 param4)
{
int rc;
unsigned long pfn;
/* If user manually set "flags", make sure it is legal */
if (flags && (flags &
~(SETWA_FLAGS_APICID|SETWA_FLAGS_MEM|SETWA_FLAGS_PCIE_SBDF)))
return -EINVAL;
/*
* We need extra sanity checks for memory errors.
* Other types leap directly to injection.
......@@ -532,7 +544,7 @@ static int einj_error_inject(u32 type, u64 param1, u64 param2)
if (type & ACPI5_VENDOR_BIT) {
if (vendor_flags != SETWA_FLAGS_MEM)
goto inject;
} else if (!(type & MEM_ERROR_MASK))
} else if (!(type & MEM_ERROR_MASK) && !(flags & SETWA_FLAGS_MEM))
goto inject;
/*
......@@ -546,15 +558,18 @@ static int einj_error_inject(u32 type, u64 param1, u64 param2)
inject:
mutex_lock(&einj_mutex);
rc = __einj_error_inject(type, param1, param2);
rc = __einj_error_inject(type, flags, param1, param2, param3, param4);
mutex_unlock(&einj_mutex);
return rc;
}
static u32 error_type;
static u32 error_flags;
static u64 error_param1;
static u64 error_param2;
static u64 error_param3;
static u64 error_param4;
static struct dentry *einj_debug_dir;
static int available_error_type_show(struct seq_file *m, void *v)
......@@ -648,7 +663,8 @@ static int error_inject_set(void *data, u64 val)
if (!error_type)
return -EINVAL;
return einj_error_inject(error_type, error_param1, error_param2);
return einj_error_inject(error_type, error_flags, error_param1, error_param2,
error_param3, error_param4);
}
DEFINE_SIMPLE_ATTRIBUTE(error_inject_fops, NULL,
......@@ -729,6 +745,10 @@ static int __init einj_init(void)
rc = -ENOMEM;
einj_param = einj_get_parameter_address();
if ((param_extension || acpi5) && einj_param) {
fentry = debugfs_create_x32("flags", S_IRUSR | S_IWUSR,
einj_debug_dir, &error_flags);
if (!fentry)
goto err_unmap;
fentry = debugfs_create_x64("param1", S_IRUSR | S_IWUSR,
einj_debug_dir, &error_param1);
if (!fentry)
......@@ -737,6 +757,14 @@ static int __init einj_init(void)
einj_debug_dir, &error_param2);
if (!fentry)
goto err_unmap;
fentry = debugfs_create_x64("param3", S_IRUSR | S_IWUSR,
einj_debug_dir, &error_param3);
if (!fentry)
goto err_unmap;
fentry = debugfs_create_x64("param4", S_IRUSR | S_IWUSR,
einj_debug_dir, &error_param4);
if (!fentry)
goto err_unmap;
fentry = debugfs_create_x32("notrigger", S_IRUSR | S_IWUSR,
einj_debug_dir, &notrigger);
......
......@@ -611,7 +611,7 @@ static void __erst_record_id_cache_compact(void)
if (entries[i] == APEI_ERST_INVALID_RECORD_ID)
continue;
if (wpos != i)
memcpy(&entries[wpos], &entries[i], sizeof(entries[i]));
entries[wpos] = entries[i];
wpos++;
}
erst_record_id_cache.len = wpos;
......
......@@ -413,27 +413,31 @@ static void ghes_handle_memory_failure(struct acpi_generic_data *gdata, int sev)
{
#ifdef CONFIG_ACPI_APEI_MEMORY_FAILURE
unsigned long pfn;
int flags = -1;
int sec_sev = ghes_severity(gdata->error_severity);
struct cper_sec_mem_err *mem_err;
mem_err = (struct cper_sec_mem_err *)(gdata + 1);
if (sec_sev == GHES_SEV_CORRECTED &&
(gdata->flags & CPER_SEC_ERROR_THRESHOLD_EXCEEDED) &&
(mem_err->validation_bits & CPER_MEM_VALID_PA)) {
if (!(mem_err->validation_bits & CPER_MEM_VALID_PA))
return;
pfn = mem_err->physical_addr >> PAGE_SHIFT;
if (pfn_valid(pfn))
memory_failure_queue(pfn, 0, MF_SOFT_OFFLINE);
else if (printk_ratelimit())
pr_warn(FW_WARN GHES_PFX
if (!pfn_valid(pfn)) {
pr_warn_ratelimited(FW_WARN GHES_PFX
"Invalid address in generic error data: %#llx\n",
mem_err->physical_addr);
return;
}
if (sev == GHES_SEV_RECOVERABLE &&
sec_sev == GHES_SEV_RECOVERABLE &&
mem_err->validation_bits & CPER_MEM_VALID_PA) {
pfn = mem_err->physical_addr >> PAGE_SHIFT;
memory_failure_queue(pfn, 0, 0);
}
/* iff following two events can be handled properly by now */
if (sec_sev == GHES_SEV_CORRECTED &&
(gdata->flags & CPER_SEC_ERROR_THRESHOLD_EXCEEDED))
flags = MF_SOFT_OFFLINE;
if (sev == GHES_SEV_RECOVERABLE && sec_sev == GHES_SEV_RECOVERABLE)
flags = 0;
if (flags != -1)
memory_failure_queue(pfn, 0, flags);
#endif
}
......@@ -453,8 +457,7 @@ static void ghes_do_proc(struct ghes *ghes,
ghes_edac_report_mem_error(ghes, sev, mem_err);
#ifdef CONFIG_X86_MCE
apei_mce_report_mem_error(sev == GHES_SEV_CORRECTED,
mem_err);
apei_mce_report_mem_error(sev, mem_err);
#endif
ghes_handle_memory_failure(gdata, sev);
}
......
......@@ -29,6 +29,25 @@ EXPORT_SYMBOL_GPL(edac_err_assert);
static atomic_t edac_subsys_valid = ATOMIC_INIT(0);
int edac_report_status = EDAC_REPORTING_ENABLED;
EXPORT_SYMBOL_GPL(edac_report_status);
static int __init edac_report_setup(char *str)
{
if (!str)
return -EINVAL;
if (!strncmp(str, "on", 2))
set_edac_report_status(EDAC_REPORTING_ENABLED);
else if (!strncmp(str, "off", 3))
set_edac_report_status(EDAC_REPORTING_DISABLED);
else if (!strncmp(str, "force", 5))
set_edac_report_status(EDAC_REPORTING_FORCE);
return 0;
}
__setup("edac_report=", edac_report_setup);
/*
* called to determine if there is an EDAC driver interested in
* knowing an event (such as NMI) occurred
......
......@@ -1829,6 +1829,9 @@ static int sbridge_mce_check_error(struct notifier_block *nb, unsigned long val,
struct mem_ctl_info *mci;
struct sbridge_pvt *pvt;
if (get_edac_report_status() == EDAC_REPORTING_DISABLED)
return NOTIFY_DONE;
mci = get_mci_for_node_id(mce->socketid);
if (!mci)
return NOTIFY_BAD;
......@@ -2142,9 +2145,10 @@ static int __init sbridge_init(void)
opstate_init();
pci_rc = pci_register_driver(&sbridge_driver);
if (pci_rc >= 0) {
mce_register_decode_chain(&sbridge_mce_dec);
if (get_edac_report_status() == EDAC_REPORTING_DISABLED)
sbridge_printk(KERN_WARNING, "Loading driver, error reporting disabled.\n");
return 0;
}
......
......@@ -35,6 +35,34 @@ extern void edac_atomic_assert_error(void);
extern struct bus_type *edac_get_sysfs_subsys(void);
extern void edac_put_sysfs_subsys(void);
enum {
EDAC_REPORTING_ENABLED,
EDAC_REPORTING_DISABLED,
EDAC_REPORTING_FORCE
};
extern int edac_report_status;
#ifdef CONFIG_EDAC
static inline int get_edac_report_status(void)
{
return edac_report_status;
}
static inline void set_edac_report_status(int new)
{
edac_report_status = new;
}
#else
static inline int get_edac_report_status(void)
{
return EDAC_REPORTING_DISABLED;
}
static inline void set_edac_report_status(int new)
{
}
#endif
static inline void opstate_init(void)
{
switch (edac_op_state) {
......
......@@ -5,7 +5,7 @@
#define _TRACE_AER_H
#include <linux/tracepoint.h>
#include <linux/edac.h>
#include <linux/aer.h>
/*
......@@ -63,10 +63,10 @@ TRACE_EVENT(aer_event,
TP_printk("%s PCIe Bus Error: severity=%s, %s\n",
__get_str(dev_name),
__entry->severity == HW_EVENT_ERR_CORRECTED ? "Corrected" :
__entry->severity == HW_EVENT_ERR_FATAL ?
"Fatal" : "Uncorrected",
__entry->severity == HW_EVENT_ERR_CORRECTED ?
__entry->severity == AER_CORRECTABLE ? "Corrected" :
__entry->severity == AER_FATAL ?
"Fatal" : "Uncorrected, non-fatal",
__entry->severity == AER_CORRECTABLE ?
__print_flags(__entry->status, "|", aer_correctable_errors) :
__print_flags(__entry->status, "|", aer_uncorrectable_errors))
);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment