Merge tag 'usb-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are a number of USB fixes for 5.7-rc6

  The "largest" in here is a bunch of raw-gadget fixes and api changes
  as the driver just showed up in -rc1 and work has been done to fix up
  some uapi issues found with the original submission, before it shows
  up in a -final release.

  Other than that, a bunch of other small USB gadget fixes, xhci fixes,
  some quirks, andother tiny fixes for reported issues.

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits)
  USB: gadget: fix illegal array access in binding with UDC
  usb: core: hub: limit HUB_QUIRK_DISABLE_AUTOSUSPEND to USB5534B
  USB: usbfs: fix mmap dma mismatch
  usb: host: xhci-plat: keep runtime active when removing host
  usb: xhci: Fix NULL pointer dereference when enqueuing trbs from urb sg list
  usb: cdns3: gadget: make a bunch of functions static
  usb: mtu3: constify struct debugfs_reg32
  usb: gadget: udc: atmel: Make some symbols static
  usb: raw-gadget: fix null-ptr-deref when reenabling endpoints
  usb: raw-gadget: documentation updates
  usb: raw-gadget: support stalling/halting/wedging endpoints
  usb: raw-gadget: fix gadget endpoint selection
  usb: raw-gadget: improve uapi headers comments
  usb: typec: mux: intel: Fix DP_HPD_LVL bit field
  usb: raw-gadget: fix return value of ep read ioctls
  usb: dwc3: select USB_ROLE_SWITCH
  usb: gadget: legacy: fix error return code in gncm_bind()
  usb: gadget: legacy: fix error return code in cdc_bind()
  usb: gadget: legacy: fix redundant initialization warnings
  usb: gadget: tegra-xudc: Fix idle suspend/resume
  ...

Documentation/usb/raw-gadget.rst

@@ -27,9 +27,8 @@ differences are:
 3. Raw Gadget provides a way to select a UDC device/driver to bind to,
    while GadgetFS currently binds to the first available UDC.
 
-4. Raw Gadget uses predictable endpoint names (handles) across different
-   UDCs (as long as UDCs have enough endpoints of each required transfer
-   type).
+4. Raw Gadget explicitly exposes information about endpoints addresses and
+   capabilities allowing a user to write UDC-agnostic gadgets.
 
 5. Raw Gadget has ioctl-based interface instead of a filesystem-based one.
 
@@ -50,12 +49,36 @@ The typical usage of Raw Gadget looks like:
    Raw Gadget and react to those depending on what kind of USB device
    needs to be emulated.
 
+Note, that some UDC drivers have fixed addresses assigned to endpoints, and
+therefore arbitrary endpoint addresses can't be used in the descriptors.
+Nevertheles, Raw Gadget provides a UDC-agnostic way to write USB gadgets.
+Once a USB_RAW_EVENT_CONNECT event is received via USB_RAW_IOCTL_EVENT_FETCH,
+the USB_RAW_IOCTL_EPS_INFO ioctl can be used to find out information about
+endpoints that the UDC driver has. Based on that information, the user must
+chose UDC endpoints that will be used for the gadget being emulated, and
+properly assign addresses in endpoint descriptors.
+
+You can find usage examples (along with a test suite) here:
+
+https://github.com/xairy/raw-gadget
+
+Internal details
+~~~~~~~~~~~~~~~~
+
+Currently every endpoint read/write ioctl submits a USB request and waits until
+its completion. This is the desired mode for coverage-guided fuzzing (as we'd
+like all USB request processing happen during the lifetime of a syscall),
+and must be kept in the implementation. (This might be slow for real world
+applications, thus the O_NONBLOCK improvement suggestion below.)
+
 Potential future improvements
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-- Implement ioctl's for setting/clearing halt status on endpoints.
-
-- Reporting more events (suspend, resume, etc.) through
-  USB_RAW_IOCTL_EVENT_FETCH.
+- Report more events (suspend, resume, etc.) through USB_RAW_IOCTL_EVENT_FETCH.
 
 - Support O_NONBLOCK I/O.
+
+- Support USB 3 features (accept SS endpoint companion descriptor when
+  enabling endpoints; allow providing stream_id for bulk transfers).
+
+- Support ISO transfer features (expose frame_number for completed requests).

drivers/usb/cdns3/gadget.c

@@ -82,7 +82,7 @@ static int cdns3_ep_run_stream_transfer(struct cdns3_endpoint *priv_ep,
  * @ptr: address of device controller register to be read and changed
  * @mask: bits requested to clar
  */
-void cdns3_clear_register_bit(void __iomem *ptr, u32 mask)
+static void cdns3_clear_register_bit(void __iomem *ptr, u32 mask)
 {
 	mask = readl(ptr) & ~mask;
 	writel(mask, ptr);
@@ -137,7 +137,7 @@ struct usb_request *cdns3_next_request(struct list_head *list)
  *
  * Returns buffer or NULL if no buffers in list
  */
-struct cdns3_aligned_buf *cdns3_next_align_buf(struct list_head *list)
+static struct cdns3_aligned_buf *cdns3_next_align_buf(struct list_head *list)
 {
 	return list_first_entry_or_null(list, struct cdns3_aligned_buf, list);
 }
@@ -148,7 +148,7 @@ struct cdns3_aligned_buf *cdns3_next_align_buf(struct list_head *list)
  *
  * Returns request or NULL if no requests in list
  */
-struct cdns3_request *cdns3_next_priv_request(struct list_head *list)
+static struct cdns3_request *cdns3_next_priv_request(struct list_head *list)
 {
 	return list_first_entry_or_null(list, struct cdns3_request, list);
 }
@@ -190,7 +190,7 @@ dma_addr_t cdns3_trb_virt_to_dma(struct cdns3_endpoint *priv_ep,
 	return priv_ep->trb_pool_dma + offset;
 }
 
-int cdns3_ring_size(struct cdns3_endpoint *priv_ep)
+static int cdns3_ring_size(struct cdns3_endpoint *priv_ep)
 {
 	switch (priv_ep->type) {
 	case USB_ENDPOINT_XFER_ISOC:
@@ -345,7 +345,7 @@ static void cdns3_ep_inc_deq(struct cdns3_endpoint *priv_ep)
 	cdns3_ep_inc_trb(&priv_ep->dequeue, &priv_ep->ccs, priv_ep->num_trbs);
 }
 
-void cdns3_move_deq_to_next_trb(struct cdns3_request *priv_req)
+static void cdns3_move_deq_to_next_trb(struct cdns3_request *priv_req)
 {
 	struct cdns3_endpoint *priv_ep = priv_req->priv_ep;
 	int current_trb = priv_req->start_trb;
@@ -511,7 +511,7 @@ static void cdns3_wa2_descmiss_copy_data(struct cdns3_endpoint *priv_ep,
 	}
 }
 
-struct usb_request *cdns3_wa2_gadget_giveback(struct cdns3_device *priv_dev,
+static struct usb_request *cdns3_wa2_gadget_giveback(struct cdns3_device *priv_dev,
 					      struct cdns3_endpoint *priv_ep,
 					      struct cdns3_request *priv_req)
 {
@@ -551,7 +551,7 @@ struct usb_request *cdns3_wa2_gadget_giveback(struct cdns3_device *priv_dev,
 	return &priv_req->request;
 }
 
-int cdns3_wa2_gadget_ep_queue(struct cdns3_device *priv_dev,
+static int cdns3_wa2_gadget_ep_queue(struct cdns3_device *priv_dev,
 			      struct cdns3_endpoint *priv_ep,
 			      struct cdns3_request *priv_req)
 {
@@ -836,7 +836,7 @@ void cdns3_gadget_giveback(struct cdns3_endpoint *priv_ep,
 		cdns3_gadget_ep_free_request(&priv_ep->endpoint, request);
 }
 
-void cdns3_wa1_restore_cycle_bit(struct cdns3_endpoint *priv_ep)
+static void cdns3_wa1_restore_cycle_bit(struct cdns3_endpoint *priv_ep)
 {
 	/* Work around for stale data address in TRB*/
 	if (priv_ep->wa1_set) {
@@ -1904,7 +1904,7 @@ static int cdns3_ep_onchip_buffer_reserve(struct cdns3_device *priv_dev,
 	return 0;
 }
 
-void cdns3_stream_ep_reconfig(struct cdns3_device *priv_dev,
+static void cdns3_stream_ep_reconfig(struct cdns3_device *priv_dev,
 			      struct cdns3_endpoint *priv_ep)
 {
 	if (!priv_ep->use_streams || priv_dev->gadget.speed < USB_SPEED_SUPER)
@@ -1925,7 +1925,7 @@ void cdns3_stream_ep_reconfig(struct cdns3_device *priv_dev,
 			       EP_CFG_TDL_CHK | EP_CFG_SID_CHK);
 }
 
-void cdns3_configure_dmult(struct cdns3_device *priv_dev,
+static void cdns3_configure_dmult(struct cdns3_device *priv_dev,
 			   struct cdns3_endpoint *priv_ep)
 {
 	struct cdns3_usb_regs __iomem *regs = priv_dev->regs;
@@ -2548,7 +2548,7 @@ int cdns3_gadget_ep_dequeue(struct usb_ep *ep,
 	link_trb = priv_req->trb;
 
 	/* Update ring only if removed request is on pending_req_list list */
-	if (req_on_hw_ring) {
+	if (req_on_hw_ring && link_trb) {
 		link_trb->buffer = TRB_BUFFER(priv_ep->trb_pool_dma +
 			((priv_req->end_trb + 1) * TRB_SIZE));
 		link_trb->control = (link_trb->control & TRB_CYCLE) |

drivers/usb/core/devio.c

@@ -251,10 +251,20 @@ static int usbdev_mmap(struct file *file, struct vm_area_struct *vma)
 	usbm->vma_use_count = 1;
 	INIT_LIST_HEAD(&usbm->memlist);
 
-	if (dma_mmap_coherent(hcd->self.sysdev, vma, mem, dma_handle, size)) {
+	if (hcd->localmem_pool || !hcd_uses_dma(hcd)) {
+		if (remap_pfn_range(vma, vma->vm_start,
+				    virt_to_phys(usbm->mem) >> PAGE_SHIFT,
+				    size, vma->vm_page_prot) < 0) {
 			dec_usb_memory_use_count(usbm, &usbm->vma_use_count);
 			return -EAGAIN;
 		}
+	} else {
+		if (dma_mmap_coherent(hcd->self.sysdev, vma, mem, dma_handle,
+				      size)) {
+			dec_usb_memory_use_count(usbm, &usbm->vma_use_count);
+			return -EAGAIN;
+		}
+	}
 
 	vma->vm_flags |= VM_IO;
 	vma->vm_flags |= (VM_DONTEXPAND | VM_DONTDUMP);

drivers/usb/core/hub.c

@@ -39,6 +39,7 @@
 
 #define USB_VENDOR_GENESYS_LOGIC		0x05e3
 #define USB_VENDOR_SMSC				0x0424
+#define USB_PRODUCT_USB5534B			0x5534
 #define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND	0x01
 #define HUB_QUIRK_DISABLE_AUTOSUSPEND		0x02
 
@@ -5621,8 +5622,11 @@ static void hub_event(struct work_struct *work)
 }
 
 static const struct usb_device_id hub_id_table[] = {
-    { .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_CLASS,
+    { .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+                   | USB_DEVICE_ID_MATCH_PRODUCT
+                   | USB_DEVICE_ID_MATCH_INT_CLASS,
       .idVendor = USB_VENDOR_SMSC,
+      .idProduct = USB_PRODUCT_USB5534B,
       .bInterfaceClass = USB_CLASS_HUB,
       .driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND},
     { .match_flags = USB_DEVICE_ID_MATCH_VENDOR

drivers/usb/dwc3/Kconfig

@@ -4,6 +4,7 @@ config USB_DWC3
 	tristate "DesignWare USB3 DRD Core Support"
 	depends on (USB || USB_GADGET) && HAS_DMA
 	select USB_XHCI_PLATFORM if USB_XHCI_HCD
+	select USB_ROLE_SWITCH if USB_DWC3_DUAL_ROLE
 	help
 	  Say Y or M here if your system has a Dual Role SuperSpeed
 	  USB controller based on the DesignWare USB3 IP Core.

drivers/usb/dwc3/dwc3-pci.c

@@ -114,6 +114,7 @@ static const struct property_entry dwc3_pci_intel_properties[] = {
 
 static const struct property_entry dwc3_pci_mrfld_properties[] = {
 	PROPERTY_ENTRY_STRING("dr_mode", "otg"),
+	PROPERTY_ENTRY_STRING("linux,extcon-name", "mrfld_bcove_pwrsrc"),
 	PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"),
 	{}
 };

drivers/usb/dwc3/gadget.c

@@ -2483,9 +2483,6 @@ static int dwc3_gadget_ep_reclaim_trb_sg(struct dwc3_ep *dep,
 	for_each_sg(sg, s, pending, i) {
 		trb = &dep->trb_pool[dep->trb_dequeue];
 
-		if (trb->ctrl & DWC3_TRB_CTRL_HWO)
-			break;
-
 		req->sg = sg_next(s);
 		req->num_pending_sgs--;
 

drivers/usb/gadget/configfs.c

@@ -260,6 +260,9 @@ static ssize_t gadget_dev_desc_UDC_store(struct config_item *item,
 	char *name;
 	int ret;
 
+	if (strlen(page) < len)
+		return -EOVERFLOW;
+
 	name = kstrdup(page, GFP_KERNEL);
 	if (!name)
 		return -ENOMEM;

drivers/usb/gadget/legacy/audio.c

@@ -300,8 +300,10 @@ static int audio_bind(struct usb_composite_dev *cdev)
 		struct usb_descriptor_header *usb_desc;
 
 		usb_desc = usb_otg_descriptor_alloc(cdev->gadget);
-		if (!usb_desc)
+		if (!usb_desc) {
+			status = -ENOMEM;
 			goto fail;
+		}
 		usb_otg_descriptor_init(cdev->gadget, usb_desc);
 		otg_desc[0] = usb_desc;
 		otg_desc[1] = NULL;

drivers/usb/gadget/legacy/cdc2.c

@@ -179,8 +179,10 @@ static int cdc_bind(struct usb_composite_dev *cdev)
 		struct usb_descriptor_header *usb_desc;
 
 		usb_desc = usb_otg_descriptor_alloc(gadget);
-		if (!usb_desc)
+		if (!usb_desc) {
+			status = -ENOMEM;
 			goto fail1;
+		}
 		usb_otg_descriptor_init(gadget, usb_desc);
 		otg_desc[0] = usb_desc;
 		otg_desc[1] = NULL;

drivers/usb/gadget/legacy/inode.c

@@ -1361,7 +1361,6 @@ gadgetfs_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
 
 	req->buf = dev->rbuf;
 	req->context = NULL;
-	value = -EOPNOTSUPP;
 	switch (ctrl->bRequest) {
 
 	case USB_REQ_GET_DESCRIPTOR:
@@ -1784,7 +1783,7 @@ static ssize_t
 dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr)
 {
 	struct dev_data		*dev = fd->private_data;
-	ssize_t			value = len, length = len;
+	ssize_t			value, length = len;
 	unsigned		total;
 	u32			tag;
 	char			*kbuf;

drivers/usb/gadget/legacy/ncm.c

@@ -156,8 +156,10 @@ static int gncm_bind(struct usb_composite_dev *cdev)
 		struct usb_descriptor_header *usb_desc;
 
 		usb_desc = usb_otg_descriptor_alloc(gadget);
-		if (!usb_desc)
+		if (!usb_desc) {
+			status = -ENOMEM;
 			goto fail;
+		}
 		usb_otg_descriptor_init(gadget, usb_desc);
 		otg_desc[0] = usb_desc;
 		otg_desc[1] = NULL;

drivers/usb/gadget/udc/atmel_usba_udc.c

@@ -185,7 +185,7 @@ static int regs_dbg_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
-const struct file_operations queue_dbg_fops = {
+static const struct file_operations queue_dbg_fops = {
 	.owner		= THIS_MODULE,
 	.open		= queue_dbg_open,
 	.llseek		= no_llseek,
@@ -193,7 +193,7 @@ const struct file_operations queue_dbg_fops = {
 	.release	= queue_dbg_release,
 };
 
-const struct file_operations regs_dbg_fops = {
+static const struct file_operations regs_dbg_fops = {
 	.owner		= THIS_MODULE,
 	.open		= regs_dbg_open,
 	.llseek		= generic_file_llseek,

drivers/usb/gadget/udc/net2272.c

@@ -2647,6 +2647,8 @@ net2272_plat_probe(struct platform_device *pdev)
  err_req:
 	release_mem_region(base, len);
  err:
+	kfree(dev);
+
 	return ret;
 }
 

drivers/usb/gadget/udc/tegra-xudc.c

@@ -3840,11 +3840,11 @@ static int __maybe_unused tegra_xudc_suspend(struct device *dev)
 
 	flush_work(&xudc->usb_role_sw_work);
 
+	if (!pm_runtime_status_suspended(dev)) {
 		/* Forcibly disconnect before powergating. */
 		tegra_xudc_device_mode_off(xudc);
-
-	if (!pm_runtime_status_suspended(dev))
 		tegra_xudc_powergate(xudc);
+	}
 
 	pm_runtime_disable(dev);
 

drivers/usb/host/xhci-plat.c

@@ -362,6 +362,7 @@ static int xhci_plat_remove(struct platform_device *dev)
 	struct clk *reg_clk = xhci->reg_clk;
 	struct usb_hcd *shared_hcd = xhci->shared_hcd;
 
+	pm_runtime_get_sync(&dev->dev);
 	xhci->xhc_state |= XHCI_STATE_REMOVING;
 
 	usb_remove_hcd(shared_hcd);
@@ -375,8 +376,9 @@ static int xhci_plat_remove(struct platform_device *dev)
 	clk_disable_unprepare(reg_clk);
 	usb_put_hcd(hcd);
 
-	pm_runtime_set_suspended(&dev->dev);
 	pm_runtime_disable(&dev->dev);
+	pm_runtime_put_noidle(&dev->dev);
+	pm_runtime_set_suspended(&dev->dev);
 
 	return 0;
 }

drivers/usb/host/xhci-ring.c

@@ -3433,8 +3433,8 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 			/* New sg entry */
 			--num_sgs;
 			sent_len -= block_len;
-			if (num_sgs != 0) {
 			sg = sg_next(sg);
+			if (num_sgs != 0 && sg) {
 				block_len = sg_dma_len(sg);
 				addr = (u64) sg_dma_address(sg);
 				addr += sent_len;

drivers/usb/mtu3/mtu3_debugfs.c

@@ -276,7 +276,7 @@ static const struct file_operations mtu3_ep_fops = {
 	.release = single_release,
 };
 
-static struct debugfs_reg32 mtu3_prb_regs[] = {
+static const struct debugfs_reg32 mtu3_prb_regs[] = {
 	dump_prb_reg("enable", U3D_SSUSB_PRB_CTRL0),
 	dump_prb_reg("byte-sell", U3D_SSUSB_PRB_CTRL1),
 	dump_prb_reg("byte-selh", U3D_SSUSB_PRB_CTRL2),
@@ -349,7 +349,7 @@ static const struct file_operations mtu3_probe_fops = {
 static void mtu3_debugfs_create_prb_files(struct mtu3 *mtu)
 {
 	struct ssusb_mtk *ssusb = mtu->ssusb;
-	struct debugfs_reg32 *regs;
+	const struct debugfs_reg32 *regs;
 	struct dentry *dir_prb;
 	int i;
 

drivers/usb/phy/phy-twl6030-usb.c

@@ -377,7 +377,7 @@ static int twl6030_usb_probe(struct platform_device *pdev)
 	if (status < 0) {
 		dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
 			twl->irq1, status);
-		return status;
+		goto err_put_regulator;
 	}
 
 	status = request_threaded_irq(twl->irq2, NULL, twl6030_usb_irq,
@@ -386,8 +386,7 @@ static int twl6030_usb_probe(struct platform_device *pdev)
 	if (status < 0) {
 		dev_err(&pdev->dev, "can't get IRQ %d, err %d\n",
 			twl->irq2, status);
-		free_irq(twl->irq1, twl);
-		return status;
+		goto err_free_irq1;
 	}
 
 	twl->asleep = 0;
@@ -396,6 +395,13 @@ static int twl6030_usb_probe(struct platform_device *pdev)
 	dev_info(&pdev->dev, "Initialized TWL6030 USB module\n");
 
 	return 0;
+
+err_free_irq1:
+	free_irq(twl->irq1, twl);
+err_put_regulator:
+	regulator_put(twl->usb3v3);
+
+	return status;
 }
 
 static int twl6030_usb_remove(struct platform_device *pdev)

drivers/usb/typec/mux/intel_pmc_mux.c

@@ -63,6 +63,7 @@ enum {
 #define PMC_USB_ALTMODE_DP_MODE_SHIFT	8
 
 /* TBT specific Mode Data bits */
+#define PMC_USB_ALTMODE_HPD_HIGH	BIT(14)
 #define PMC_USB_ALTMODE_TBT_TYPE	BIT(17)
 #define PMC_USB_ALTMODE_CABLE_TYPE	BIT(18)
 #define PMC_USB_ALTMODE_ACTIVE_LINK	BIT(20)
@@ -74,8 +75,8 @@ enum {
 #define PMC_USB_ALTMODE_TBT_GEN(_g_)	(((_g_) & GENMASK(1, 0)) << 28)
 
 /* Display HPD Request bits */
+#define PMC_USB_DP_HPD_LVL		BIT(4)
 #define PMC_USB_DP_HPD_IRQ		BIT(5)
-#define PMC_USB_DP_HPD_LVL		BIT(6)
 
 struct pmc_usb;
 
@@ -158,8 +159,7 @@ pmc_usb_mux_dp(struct pmc_usb_port *port, struct typec_mux_state *state)
 			 PMC_USB_ALTMODE_DP_MODE_SHIFT;
 
 	if (data->status & DP_STATUS_HPD_STATE)
-		req.mode_data |= PMC_USB_DP_HPD_LVL <<
-				 PMC_USB_ALTMODE_DP_MODE_SHIFT;
+		req.mode_data |= PMC_USB_ALTMODE_HPD_HIGH;
 
 	return pmc_usb_command(port, (void *)&req, sizeof(req));
 }

include/uapi/linux/usb/raw_gadget.h

@@ -93,6 +93,64 @@ struct usb_raw_ep_io {
 	__u8		data[0];
 };
 
+/* Maximum number of non-control endpoints in struct usb_raw_eps_info. */
+#define USB_RAW_EPS_NUM_MAX	30
+
+/* Maximum length of UDC endpoint name in struct usb_raw_ep_info. */
+#define USB_RAW_EP_NAME_MAX	16
+
+/* Used as addr in struct usb_raw_ep_info if endpoint accepts any address. */
+#define USB_RAW_EP_ADDR_ANY	0xff
+
+/*
+ * struct usb_raw_ep_caps - exposes endpoint capabilities from struct usb_ep
+ *     (technically from its member struct usb_ep_caps).
+ */
+struct usb_raw_ep_caps {
+	__u32	type_control	: 1;
+	__u32	type_iso	: 1;
+	__u32	type_bulk	: 1;
+	__u32	type_int	: 1;
+	__u32	dir_in		: 1;
+	__u32	dir_out		: 1;
+};
+
+/*
+ * struct usb_raw_ep_limits - exposes endpoint limits from struct usb_ep.
+ * @maxpacket_limit: Maximum packet size value supported by this endpoint.
+ * @max_streams: maximum number of streams supported by this endpoint
+ *     (actual number is 2^n).
+ * @reserved: Empty, reserved for potential future extensions.
+ */
+struct usb_raw_ep_limits {
+	__u16	maxpacket_limit;
+	__u16	max_streams;
+	__u32	reserved;
+};
+
+/*
+ * struct usb_raw_ep_info - stores information about a gadget endpoint.
+ * @name: Name of the endpoint as it is defined in the UDC driver.
+ * @addr: Address of the endpoint that must be specified in the endpoint
+ *     descriptor passed to USB_RAW_IOCTL_EP_ENABLE ioctl.
+ * @caps: Endpoint capabilities.
+ * @limits: Endpoint limits.
+ */
+struct usb_raw_ep_info {
+	__u8				name[USB_RAW_EP_NAME_MAX];
+	__u32				addr;
+	struct usb_raw_ep_caps		caps;
+	struct usb_raw_ep_limits	limits;
+};
+
+/*
+ * struct usb_raw_eps_info - argument for USB_RAW_IOCTL_EPS_INFO ioctl.
+ * eps: Structures that store information about non-control endpoints.
+ */
+struct usb_raw_eps_info {
+	struct usb_raw_ep_info	eps[USB_RAW_EPS_NUM_MAX];
+};
+
 /*
  * Initializes a Raw Gadget instance.
  * Accepts a pointer to the usb_raw_init struct as an argument.
@@ -115,37 +173,38 @@ struct usb_raw_ep_io {
 #define USB_RAW_IOCTL_EVENT_FETCH	_IOR('U', 2, struct usb_raw_event)
 
 /*
- * Queues an IN (OUT for READ) urb as a response to the last control request
- * received on endpoint 0, provided that was an IN (OUT for READ) request and
- * waits until the urb is completed. Copies received data to user for READ.
+ * Queues an IN (OUT for READ) request as a response to the last setup request
+ * received on endpoint 0 (provided that was an IN (OUT for READ) request), and
+ * waits until the request is completed. Copies received data to user for READ.
  * Accepts a pointer to the usb_raw_ep_io struct as an argument.
- * Returns length of trasferred data on success or negative error code on
+ * Returns length of transferred data on success or negative error code on
  * failure.
  */
 #define USB_RAW_IOCTL_EP0_WRITE		_IOW('U', 3, struct usb_raw_ep_io)
 #define USB_RAW_IOCTL_EP0_READ		_IOWR('U', 4, struct usb_raw_ep_io)
 
 /*
- * Finds an endpoint that supports the transfer type specified in the
- * descriptor and enables it.
- * Accepts a pointer to the usb_endpoint_descriptor struct as an argument.
+ * Finds an endpoint that satisfies the parameters specified in the provided
+ * descriptors (address, transfer type, etc.) and enables it.
+ * Accepts a pointer to the usb_raw_ep_descs struct as an argument.
  * Returns enabled endpoint handle on success or negative error code on failure.
  */
 #define USB_RAW_IOCTL_EP_ENABLE		_IOW('U', 5, struct usb_endpoint_descriptor)
 
-/* Disables specified endpoint.
+/*
+ * Disables specified endpoint.
  * Accepts endpoint handle as an argument.
  * Returns 0 on success or negative error code on failure.
  */
 #define USB_RAW_IOCTL_EP_DISABLE	_IOW('U', 6, __u32)
 
 /*
- * Queues an IN (OUT for READ) urb as a response to the last control request
- * received on endpoint usb_raw_ep_io.ep, provided that was an IN (OUT for READ)
- * request and waits until the urb is completed. Copies received data to user
- * for READ.
+ * Queues an IN (OUT for READ) request as a response to the last setup request
+ * received on endpoint usb_raw_ep_io.ep (provided that was an IN (OUT for READ)
+ * request), and waits until the request is completed. Copies received data to
+ * user for READ.
  * Accepts a pointer to the usb_raw_ep_io struct as an argument.
- * Returns length of trasferred data on success or negative error code on
+ * Returns length of transferred data on success or negative error code on
  * failure.
  */
 #define USB_RAW_IOCTL_EP_WRITE		_IOW('U', 7, struct usb_raw_ep_io)
@@ -164,4 +223,27 @@ struct usb_raw_ep_io {
  */
 #define USB_RAW_IOCTL_VBUS_DRAW		_IOW('U', 10, __u32)
 
+/*
+ * Fills in the usb_raw_eps_info structure with information about non-control
+ * endpoints available for the currently connected UDC.
+ * Returns the number of available endpoints on success or negative error code
+ * on failure.
+ */
+#define USB_RAW_IOCTL_EPS_INFO		_IOR('U', 11, struct usb_raw_eps_info)
+
+/*
+ * Stalls a pending control request on endpoint 0.
+ * Returns 0 on success or negative error code on failure.
+ */
+#define USB_RAW_IOCTL_EP0_STALL		_IO('U', 12)
+
+/*
+ * Sets or clears halt or wedge status of the endpoint.
+ * Accepts endpoint handle as an argument.
+ * Returns 0 on success or negative error code on failure.
+ */
+#define USB_RAW_IOCTL_EP_SET_HALT	_IOW('U', 13, __u32)
+#define USB_RAW_IOCTL_EP_CLEAR_HALT	_IOW('U', 14, __u32)
+#define USB_RAW_IOCTL_EP_SET_WEDGE	_IOW('U', 15, __u32)
+
 #endif /* _UAPI__LINUX_USB_RAW_GADGET_H */