Skip to content

L
linux
Commit fb443f36 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge tag 'mips_6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux 

Pull MIPS updates from Thomas Bogendoerfer:

 - mainly cleanups

 - fix enabling interrupts on second VPE for Lantiq platform

 - switch to use gpiod API

 - allow firmware passing RND seed

* tag 'mips_6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (29 commits)
  MIPS: pci: lantiq: switch to using gpiod API
  mips: allow firmware to pass RNG seed to kernel
  MIPS: Simplify __bswapdi2() and __bswapsi2()
  MIPS: Silence missing prototype warning
  mips: update config files
  MIPS: Lantiq: vmmc: fix compile break introduced by gpiod patch
  MIPS: IRQ: remove orphan allocate_irqno() declaration
  MIPS: remove orphan sb1250_time_init() declaration
  MIPS: Lantiq: switch vmmc to use gpiod API
  MIPS: lantiq: enable all hardware interrupts on second VPE
  MIPS: BCM47XX: Cast memcmp() of function to (void *)
  mips: ralink: convert to DEFINE_SHOW_ATTRIBUTE
  mips: kernel: convert to DEFINE_SHOW_ATTRIBUTE
  mips: cavium: convert to DEFINE_SHOW_ATTRIBUTE
  MIPS: AR7: remove orphan declarations from arch/mips/include/asm/mach-ar7/ar7.h
  MIPS: remove orphan sni_cpu_time_init() declaration
  MIPS: IRQ: remove orphan declarations from arch/mips/include/asm/irq.h
  MIPS: Octeon: remove orphan octeon_hal_setup_reserved32() declaration
  MIPS: Octeon: remove orphan cvmx_fpa_setup_pool() declaration
  MIPS: Octeon: remove orphan octeon_swiotlb declaration
  ...
parents 4fe89d07 90c2d2eb
Show whitespace changes
Inline Side-by-side
Showing with 215 additions and 414 deletions
arch/mips/bcm47xx/prom.c
View file @ fb443f36
......@@ -86,7 +86,7 @@ static __init void prom_init_mem(void)
pr_debug("Assume 128MB RAM\n");
break;
}
if (!memcmp(prom_init, prom_init + mem, 32))
if (!memcmp((void *)prom_init, (void *)prom_init + mem, 32))
break;
}
lowmem = mem;
......@@ -159,7 +159,7 @@ void __init bcm47xx_prom_highmem_init(void)
off = EXTVBASE + __pa(off);
for (extmem = 128 << 20; extmem < 512 << 20; extmem <<= 1) {
if (!memcmp(prom_init, (void *)(off + extmem), 16))
if (!memcmp((void *)prom_init, (void *)(off + extmem), 16))
break;
}
extmem -= lowmem;
......
arch/mips/boot/dts/brcm/bcm63268.dtsi
View file @ fb443f36
......@@ -105,15 +105,21 @@ periph_intc: interrupt-controller@10000020 {
interrupts = <2>, <3>;
};
wdt: watchdog@1000009c {
timer-mfd@10000080 {
compatible = "brcm,bcm7038-twd", "simple-mfd", "syscon";
reg = <0x10000080 0x30>;
ranges = <0x0 0x10000080 0x30>;
wdt: watchdog@1c {
compatible = "brcm,bcm7038-wdt";
reg = <0x1000009c 0xc>;
reg = <0x1c 0xc>;
clocks = <&periph_osc>;
clock-names = "refclk";
timeout-sec = <30>;
};
};
uart0: serial@10000180 {
compatible = "brcm,bcm6345-uart";
......
arch/mips/boot/dts/lantiq/Makefile
View file @ fb443f36
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_DT_EASY50712) += easy50712.dtb
dtb-$(CONFIG_DT_EASY50712) += danube_easy50712.dtb
obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
arch/mips/cavium-octeon/oct_ilm.c
View file @ fb443f36
......@@ -28,7 +28,7 @@ struct latency_info {
static struct latency_info li;
static struct dentry *dir;
static int show_latency(struct seq_file *m, void *v)
static int oct_ilm_show(struct seq_file *m, void *v)
{
u64 cpuclk, avg, max, min;
struct latency_info curr_li = li;
......@@ -43,18 +43,7 @@ static int show_latency(struct seq_file *m, void *v)
curr_li.interrupt_cnt, avg, max, min);
return 0;
}
static int oct_ilm_open(struct inode *inode, struct file *file)
{
return single_open(file, show_latency, NULL);
}
static const struct file_operations oct_ilm_ops = {
.open = oct_ilm_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
DEFINE_SHOW_ATTRIBUTE(oct_ilm);
static int reset_statistics(void *data, u64 value)
{
......@@ -67,7 +56,7 @@ DEFINE_DEBUGFS_ATTRIBUTE(reset_statistics_ops, NULL, reset_statistics, "%llu\n")
static void init_debugfs(void)
{
dir = debugfs_create_dir("oct_ilm", 0);
debugfs_create_file("statistics", 0222, dir, NULL, &oct_ilm_ops);
debugfs_create_file("statistics", 0222, dir, NULL, &oct_ilm_fops);
debugfs_create_file("reset", 0222, dir, NULL, &reset_statistics_ops);
}
......
arch/mips/cavium-octeon/setup.c
View file @ fb443f36
......@@ -530,7 +530,7 @@ void octeon_user_io_init(void)
/* Get the current settings for CP0_CVMMEMCTL_REG */
cvmmemctl.u64 = read_c0_cvmmemctl();
/* R/W If set, marked write-buffer entries time out the same
* as as other entries; if clear, marked write-buffer entries
* as other entries; if clear, marked write-buffer entries
* use the maximum timeout. */
cvmmemctl.s.dismarkwblongto = 1;
/* R/W If set, a merged store does not clear the write-buffer
......
arch/mips/configs/ar7_defconfig
View file @ fb443f36
......@@ -32,9 +32,6 @@ CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_MROUTE=y
CONFIG_SYN_COOKIES=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
......@@ -117,7 +114,6 @@ CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_SQUASHFS=y
# CONFIG_CRYPTO_HW is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_STRIP_ASM_SYMS=y
CONFIG_DEBUG_FS=y
CONFIG_CMDLINE_BOOL=y
......
arch/mips/configs/ath25_defconfig
View file @ fb443f36
......@@ -29,9 +29,6 @@ CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_CFG80211=m
CONFIG_MAC80211=m
......@@ -108,7 +105,6 @@ CONFIG_SQUASHFS_XZ=y
# CONFIG_XZ_DEC_ARMTHUMB is not set
# CONFIG_XZ_DEC_SPARC is not set
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_STRIP_ASM_SYMS=y
CONFIG_DEBUG_FS=y
# CONFIG_SCHED_DEBUG is not set
......
arch/mips/configs/ath79_defconfig
View file @ fb443f36
......@@ -10,12 +10,6 @@ CONFIG_EMBEDDED=y
# CONFIG_SLUB_DEBUG is not set
# CONFIG_COMPAT_BRK is not set
CONFIG_ATH79=y
CONFIG_ATH79_MACH_AP121=y
CONFIG_ATH79_MACH_AP136=y
CONFIG_ATH79_MACH_AP81=y
CONFIG_ATH79_MACH_DB120=y
CONFIG_ATH79_MACH_PB44=y
CONFIG_ATH79_MACH_UBNT_XM=y
CONFIG_HZ_100=y
# CONFIG_SECCOMP is not set
CONFIG_PCI=y
......@@ -29,9 +23,6 @@ CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_CFG80211=m
CONFIG_MAC80211=m
......@@ -92,7 +83,6 @@ CONFIG_LEDS_GPIO=y
# CONFIG_DNOTIFY is not set
# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_CRC_ITU_T=m
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_STRIP_ASM_SYMS=y
CONFIG_DEBUG_FS=y
# CONFIG_SCHED_DEBUG is not set
......
arch/mips/configs/bcm63xx_defconfig
View file @ fb443f36
......@@ -24,9 +24,6 @@ CONFIG_PCMCIA_BCM63XX=y
CONFIG_NET=y
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
CONFIG_CFG80211=y
......
arch/mips/configs/bigsur_defconfig
View file @ fb443f36
......@@ -49,8 +49,6 @@ CONFIG_IP_PIMSM_V2=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
......@@ -59,7 +57,6 @@ CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
......@@ -101,7 +98,6 @@ CONFIG_BAYCOM_SER_HDX=m
CONFIG_YAM=m
CONFIG_FW_LOADER=m
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_EEPROM_LEGACY=y
CONFIG_EEPROM_MAX6875=y
......@@ -230,12 +226,8 @@ CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_BLOWFISH=m
......@@ -243,7 +235,6 @@ CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
......
arch/mips/configs/bmips_be_defconfig
View file @ fb443f36
......@@ -17,9 +17,6 @@ CONFIG_PACKET=y
CONFIG_PACKET_DIAG=y
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
CONFIG_CFG80211=y
CONFIG_NL80211_TESTMODE=y
......
arch/mips/configs/bmips_stb_defconfig
View file @ fb443f36
......@@ -12,7 +12,6 @@ CONFIG_HIGHMEM=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_SMP=y
CONFIG_NR_CPUS=4
CONFIG_CC_STACKPROTECTOR_STRONG=y
# CONFIG_SECCOMP is not set
CONFIG_MIPS_O32_FP64_SUPPORT=y
# CONFIG_RD_GZIP is not set
......@@ -21,8 +20,6 @@ CONFIG_MIPS_O32_FP64_SUPPORT=y
CONFIG_RD_XZ=y
# CONFIG_RD_LZO is not set
# CONFIG_RD_LZ4 is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_PCI=y
CONFIG_PCI_MSI=y
CONFIG_PCIEASPM_POWERSAVE=y
......@@ -30,7 +27,6 @@ CONFIG_PCIEPORTBUS=y
CONFIG_PCIE_BRCMSTB=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
......@@ -44,15 +40,11 @@ CONFIG_PACKET=y
CONFIG_PACKET_DIAG=y
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
CONFIG_CFG80211=y
CONFIG_NL80211_TESTMODE=y
CONFIG_WIRELESS=y
CONFIG_MAC80211=y
CONFIG_NL80211=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not set
......@@ -70,10 +62,6 @@ CONFIG_IP_PNP_RARP=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
CONFIG_INET_UDP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
......@@ -93,7 +81,6 @@ CONFIG_NET_SWITCHDEV=y
CONFIG_DMA_CMA=y
CONFIG_CMA_ALIGNMENT=12
CONFIG_SPI=y
CONFIG_SPI_BRCMSTB=y
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
......@@ -105,14 +92,11 @@ CONFIG_MTD_CFI_STAA=y
CONFIG_MTD_ROM=y
CONFIG_MTD_ABSENT=y
CONFIG_MTD_PHYSMAP_OF=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_BRCMNAND=y
CONFIG_MTD_SPI_NOR=y
# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_GLUEBI=y
CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
......@@ -120,7 +104,6 @@ CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_VLAN_8021Q=y
......@@ -135,7 +118,6 @@ CONFIG_INPUT_UINPUT=y
# CONFIG_SERIO is not set
CONFIG_VT=y
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_CONSOLE=y
......@@ -203,17 +185,14 @@ CONFIG_CMDLINE="earlycon"
CONFIG_MIPS_CMDLINE_DTB_EXTEND=y
# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_DT_BCM974XX=y
CONFIG_FW_CFE=y
CONFIG_ATA=y
CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_AHCI_BRCMSTB=y
CONFIG_GENERIC_PHY=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
CONFIG_PHY_BRCM_USB=y
CONFIG_PHY_BRCM_SATA=y
CONFIG_PM_RUNTIME=y
CONFIG_PM_DEBUG=y
CONFIG_SYSVIPC=y
CONFIG_FUNCTION_GRAPH_TRACER=y
......@@ -227,3 +206,5 @@ CONFIG_FTRACE_SYSCALLS=y
CONFIG_TRACER_SNAPSHOT=y
CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y
CONFIG_STACK_TRACER=y
CONFIG_AHCI_BRCM=y
CONFIG_MTD_RAW_NAND=y
arch/mips/configs/cavium_octeon_defconfig
View file @ fb443f36
......@@ -71,7 +71,6 @@ CONFIG_NETDEVICES=y
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_HP is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
......
arch/mips/configs/db1xxx_defconfig
View file @ fb443f36
......@@ -61,7 +61,6 @@ CONFIG_INET6_AH=y
CONFIG_INET6_ESP=y
CONFIG_INET6_IPCOMP=y
CONFIG_IPV6_MIP6=y
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=y
CONFIG_IPV6_VTI=y
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_GRE=y
......
arch/mips/configs/decstation_64_defconfig
View file @ fb443f36
......@@ -37,9 +37,6 @@ CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
......@@ -47,7 +44,6 @@ CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_NETWORK_SECMARK=y
......@@ -79,7 +75,6 @@ CONFIG_NETDEVICES=y
CONFIG_DECLANCE=y
# CONFIG_NET_VENDOR_AQUANTIA is not set
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_AURORA is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CADENCE is not set
# CONFIG_NET_VENDOR_CAVIUM is not set
......@@ -193,12 +188,8 @@ CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRCT10DIF=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
......@@ -208,7 +199,6 @@ CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
......
arch/mips/configs/decstation_defconfig
View file @ fb443f36
......@@ -33,9 +33,6 @@ CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
......@@ -43,7 +40,6 @@ CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_NETWORK_SECMARK=y
......@@ -75,7 +71,6 @@ CONFIG_NETDEVICES=y
CONFIG_DECLANCE=y
# CONFIG_NET_VENDOR_AQUANTIA is not set
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_AURORA is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CADENCE is not set
# CONFIG_NET_VENDOR_CAVIUM is not set
......@@ -188,12 +183,8 @@ CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRCT10DIF=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
......@@ -203,7 +194,6 @@ CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
......
arch/mips/configs/decstation_r4k_defconfig
View file @ fb443f36
......@@ -32,9 +32,6 @@ CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
......@@ -42,7 +39,6 @@ CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_NETWORK_SECMARK=y
......@@ -74,7 +70,6 @@ CONFIG_NETDEVICES=y
CONFIG_DECLANCE=y
# CONFIG_NET_VENDOR_AQUANTIA is not set
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_AURORA is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CADENCE is not set
# CONFIG_NET_VENDOR_CAVIUM is not set
......@@ -188,12 +183,8 @@ CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRCT10DIF=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
......@@ -203,7 +194,6 @@ CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
......
arch/mips/configs/fuloong2e_defconfig
View file @ fb443f36
......@@ -35,8 +35,6 @@ CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_NET_IPIP=m
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
......@@ -92,7 +90,6 @@ CONFIG_MTD_CFI_AMDSTD=m
CONFIG_MTD_CFI_STAA=m
CONFIG_MTD_PHYSMAP=m
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_RAM=m
CONFIG_CDROM_PKTCDVD=m
CONFIG_ATA_OVER_ETH=m
......@@ -159,7 +156,6 @@ CONFIG_USB_MOUSE=y
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_OTG_PRODUCTLIST=y
CONFIG_USB_WUSB_CBAF=m
CONFIG_USB_C67X00_HCD=m
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
......@@ -219,15 +215,10 @@ CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_HW is not set
CONFIG_CRC_CCITT=y
CONFIG_CRC7=m
# CONFIG_ENABLE_MUST_CHECK is not set
arch/mips/configs/generic/board-ocelot.config
View file @ fb443f36
......@@ -25,7 +25,6 @@ CONFIG_NETDEVICES=y
CONFIG_NET_SWITCHDEV=y
CONFIG_NET_DSA=y
CONFIG_MSCC_OCELOT_SWITCH=y
CONFIG_MSCC_OCELOT_SWITCH_OCELOT=y
CONFIG_MDIO_MSCC_MIIM=y
CONFIG_MICROSEMI_PHY=y
......
arch/mips/configs/gpr_defconfig
View file @ fb443f36
......@@ -29,9 +29,6 @@ CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_SYN_COOKIES=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
......@@ -220,9 +217,6 @@ CONFIG_HDLC_X25=m
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
CONFIG_FARSYNC=m
CONFIG_DSCC4=m
CONFIG_DSCC4_PCISYNC=y
CONFIG_DSCC4_PCI_RST=y
CONFIG_LAPBETHER=m
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
......@@ -288,7 +282,6 @@ CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_BLOWFISH=m
......@@ -299,7 +292,6 @@ CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs rw ip=auto"
arch/mips/configs/ip22_defconfig
View file @ fb443f36
......@@ -36,9 +36,6 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
......@@ -47,7 +44,6 @@ CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
......@@ -226,7 +222,6 @@ CONFIG_SERIO_RAW=m
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_SERIAL_IP22_ZILOG=m
# CONFIG_HW_RANDOM is not set
CONFIG_RAW_DRIVER=m
# CONFIG_HWMON is not set
CONFIG_THERMAL=y
CONFIG_WATCHDOG=y
......@@ -320,11 +315,7 @@ CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_BLOWFISH=m
......@@ -333,7 +324,6 @@ CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
......
arch/mips/configs/ip27_defconfig
View file @ fb443f36
......@@ -33,9 +33,6 @@ CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
......@@ -44,10 +41,6 @@ CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_TUNNEL=m
......@@ -92,7 +85,6 @@ CONFIG_CFG80211=m
CONFIG_MAC80211=m
CONFIG_RFKILL=m
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_CDROM_PKTCDVD=m
CONFIG_ATA_OVER_ETH=m
CONFIG_SCSI=y
......@@ -115,7 +107,6 @@ CONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not set
CONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not set
CONFIG_SCSI_DPT_I2O=m
CONFIG_SCSI_MPT2SAS=m
CONFIG_LIBFC=m
CONFIG_SCSI_QLOGIC_1280=y
......@@ -126,8 +117,6 @@ CONFIG_SCSI_DH_RDAC=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
CONFIG_SCSI_OSD_INITIATOR=m
CONFIG_SCSI_OSD_ULD=m
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=m
......@@ -166,7 +155,6 @@ CONFIG_JME=m
CONFIG_MLX4_EN=m
# CONFIG_MLX4_DEBUG is not set
CONFIG_KS8851_MLL=m
CONFIG_VXGE=m
CONFIG_AX88796=m
CONFIG_AX88796_93CX6=y
CONFIG_ETHOC=m
......@@ -264,7 +252,6 @@ CONFIG_I2C_VIAPRO=m
CONFIG_I2C_OCORES=m
CONFIG_I2C_PCA_PLATFORM=m
CONFIG_I2C_SIMTEC=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_STUB=m
# CONFIG_HWMON is not set
......@@ -309,7 +296,6 @@ CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_SQUASHFS=m
CONFIG_OMFS_FS=m
CONFIG_EXOFS_FS=m
CONFIG_NFS_FS=y
CONFIG_SECURITYFS=y
CONFIG_CRYPTO_CRYPTD=m
......@@ -321,12 +307,8 @@ CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_BLOWFISH=m
......@@ -335,7 +317,6 @@ CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
......
arch/mips/configs/ip28_defconfig
View file @ fb443f36
......@@ -29,9 +29,6 @@ CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_TCP_MD5SIG=y
# CONFIG_IPV6 is not set
CONFIG_SCSI=y
......
arch/mips/configs/ip32_defconfig
View file @ fb443f36
......@@ -43,7 +43,6 @@ CONFIG_IPV6_TUNNEL=m
CONFIG_NETWORK_SECMARK=y
CONFIG_CONNECTOR=y
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
......@@ -165,7 +164,6 @@ CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_ARC4=y
......
arch/mips/configs/jazz_defconfig
View file @ fb443f36
......@@ -32,7 +32,6 @@ CONFIG_PARPORT_1284=y
CONFIG_DEVTMPFS=y
CONFIG_BLK_DEV_FD=m
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=m
CONFIG_CDROM_PKTCDVD=m
......
arch/mips/configs/lemote2f_defconfig
View file @ fb443f36
......@@ -43,9 +43,6 @@ CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=y
CONFIG_DEFAULT_BIC=y
......@@ -77,7 +74,6 @@ CONFIG_MAC80211_LEDS=y
CONFIG_RFKILL=m
CONFIG_RFKILL_INPUT=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_SD=y
......@@ -312,12 +308,8 @@ CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_BLOWFISH=m
......@@ -326,7 +318,6 @@ CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
......
arch/mips/configs/loongson1b_defconfig
View file @ fb443f36
......@@ -28,9 +28,6 @@ CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_SYN_COOKIES=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set
......@@ -115,7 +112,6 @@ CONFIG_NLS_ISO8859_1=m
# CONFIG_CRYPTO_ECHAINIV is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_DYNAMIC_DEBUG=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_SCHED_DEBUG is not set
......
arch/mips/configs/loongson1c_defconfig
View file @ fb443f36
......@@ -29,9 +29,6 @@ CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_SYN_COOKIES=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set
......@@ -116,7 +113,6 @@ CONFIG_NLS_ISO8859_1=m
# CONFIG_CRYPTO_ECHAINIV is not set
# CONFIG_CRYPTO_HW is not set
CONFIG_DYNAMIC_DEBUG=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_SCHED_DEBUG is not set
......
arch/mips/configs/loongson2k_defconfig
View file @ fb443f36
......@@ -95,7 +95,6 @@ CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=m
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_RAID_ATTRS=m
......@@ -229,7 +228,6 @@ CONFIG_SERIAL_8250_RSA=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_HW_RANDOM=y
CONFIG_RAW_DRIVER=m
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_PIIX4=y
CONFIG_GPIO_LOONGSON=y
......@@ -336,7 +334,6 @@ CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAST5=m
......
arch/mips/configs/loongson3_defconfig
View file @ fb443f36
......@@ -143,7 +143,6 @@ CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=m
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_VIRTIO_BLK=y
......@@ -268,7 +267,6 @@ CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_HW_RANDOM=y
CONFIG_RAW_DRIVER=m
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_PIIX4=y
CONFIG_GPIO_LOONGSON=y
......
arch/mips/configs/malta_defconfig
View file @ fb443f36
......@@ -42,8 +42,6 @@ CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
......@@ -229,7 +227,6 @@ CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_GLUEBI=m
CONFIG_BLK_DEV_FD=m
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_CDROM_PKTCDVD=m
......@@ -237,7 +234,6 @@ CONFIG_ATA_OVER_ETH=m
CONFIG_RAID_ATTRS=m
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=m
CONFIG_SCSI_CONSTANTS=y
......@@ -408,7 +404,6 @@ CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_BLOWFISH=m
......
arch/mips/configs/malta_kvm_defconfig
View file @ fb443f36
......@@ -46,8 +46,6 @@ CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
......@@ -233,7 +231,6 @@ CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_GLUEBI=m
CONFIG_BLK_DEV_FD=m
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_CDROM_PKTCDVD=m
......@@ -241,7 +238,6 @@ CONFIG_ATA_OVER_ETH=m
CONFIG_RAID_ATTRS=m
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=m
CONFIG_SCSI_CONSTANTS=y
......@@ -415,7 +411,6 @@ CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_BLOWFISH=m
......
arch/mips/configs/malta_qemu_32r6_defconfig
View file @ fb443f36
......@@ -76,7 +76,6 @@ CONFIG_NET_ACT_POLICE=y
# CONFIG_WIRELESS is not set
CONFIG_DEVTMPFS=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
# CONFIG_SCSI_LOWLEVEL is not set
......@@ -98,7 +97,6 @@ CONFIG_PCNET32=y
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_HP is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
......@@ -172,7 +170,6 @@ CONFIG_NLS_ISO8859_1=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_BLOWFISH=m
......
arch/mips/configs/maltaaprp_defconfig
View file @ fb443f36
......@@ -78,7 +78,6 @@ CONFIG_NET_ACT_POLICE=y
# CONFIG_WIRELESS is not set
CONFIG_DEVTMPFS=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
# CONFIG_SCSI_LOWLEVEL is not set
......@@ -100,7 +99,6 @@ CONFIG_PCNET32=y
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_HP is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
......@@ -173,7 +171,6 @@ CONFIG_NLS_ISO8859_1=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_BLOWFISH=m
......
arch/mips/configs/maltasmvp_defconfig
View file @ fb443f36
......@@ -79,7 +79,6 @@ CONFIG_NET_ACT_POLICE=y
# CONFIG_WIRELESS is not set
CONFIG_DEVTMPFS=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
# CONFIG_SCSI_LOWLEVEL is not set
......@@ -99,7 +98,6 @@ CONFIG_PCNET32=y
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_HP is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
......@@ -174,7 +172,6 @@ CONFIG_NLS_ISO8859_1=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_BLOWFISH=m
......
arch/mips/configs/maltasmvp_eva_defconfig
View file @ fb443f36
......@@ -80,7 +80,6 @@ CONFIG_NET_ACT_POLICE=y
# CONFIG_WIRELESS is not set
CONFIG_DEVTMPFS=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
# CONFIG_SCSI_LOWLEVEL is not set
......@@ -102,7 +101,6 @@ CONFIG_PCNET32=y
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_HP is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
......@@ -176,7 +174,6 @@ CONFIG_NLS_ISO8859_1=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_BLOWFISH=m
......
arch/mips/configs/maltaup_defconfig
View file @ fb443f36
......@@ -77,7 +77,6 @@ CONFIG_NET_ACT_POLICE=y
# CONFIG_WIRELESS is not set
CONFIG_DEVTMPFS=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
# CONFIG_SCSI_LOWLEVEL is not set
......@@ -99,7 +98,6 @@ CONFIG_PCNET32=y
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_HP is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
......@@ -172,7 +170,6 @@ CONFIG_NLS_ISO8859_1=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_BLOWFISH=m
......
arch/mips/configs/maltaup_xpa_defconfig
View file @ fb443f36
......@@ -45,8 +45,6 @@ CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
......@@ -231,7 +229,6 @@ CONFIG_MTD_UBI=m
CONFIG_MTD_UBI_GLUEBI=m
CONFIG_BLK_DEV_FD=m
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_CDROM_PKTCDVD=m
......@@ -239,7 +236,6 @@ CONFIG_ATA_OVER_ETH=m
CONFIG_RAID_ATTRS=m
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=y
CONFIG_CHR_DEV_SG=m
CONFIG_SCSI_CONSTANTS=y
......@@ -414,7 +410,6 @@ CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_BLOWFISH=m
......
arch/mips/configs/mtx1_defconfig
View file @ fb443f36
......@@ -58,13 +58,9 @@ CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_TUNNEL=m
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
......@@ -284,7 +280,6 @@ CONFIG_PCMCIA_XIRCOM=m
CONFIG_DL2K=m
CONFIG_SUNDANCE=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_HP100=m
CONFIG_E100=m
CONFIG_E1000=m
CONFIG_IXGB=m
......@@ -368,9 +363,6 @@ CONFIG_HDLC_X25=m
CONFIG_PCI200SYN=m
CONFIG_WANXL=m
CONFIG_FARSYNC=m
CONFIG_DSCC4=m
CONFIG_DSCC4_PCISYNC=y
CONFIG_DSCC4_PCI_RST=y
CONFIG_LAPBETHER=m
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_GPIO=y
......@@ -683,7 +675,6 @@ CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_BLOWFISH=m
......@@ -692,5 +683,4 @@ CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
arch/mips/configs/omega2p_defconfig
View file @ fb443f36
......@@ -35,9 +35,6 @@ CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set
......
arch/mips/configs/pic32mzda_defconfig
View file @ fb443f36
......@@ -45,7 +45,6 @@ CONFIG_KEYBOARD_GPIO_POLLED=m
CONFIG_SERIAL_PIC32=y
CONFIG_SERIAL_PIC32_CONSOLE=y
CONFIG_HW_RANDOM=y
CONFIG_RAW_DRIVER=m
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
CONFIG_HIDRAW=y
......
arch/mips/configs/rb532_defconfig
View file @ fb443f36
......@@ -33,9 +33,6 @@ CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_SYN_COOKIES=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_CUBIC=m
......@@ -162,5 +159,4 @@ CONFIG_SQUASHFS=y
CONFIG_CRYPTO_TEST=m
# CONFIG_CRYPTO_HW is not set
CONFIG_CRC16=m
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_STRIP_ASM_SYMS=y
arch/mips/configs/rbtx49xx_defconfig
View file @ fb443f36
......@@ -21,9 +21,6 @@ CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set
CONFIG_MTD=y
......@@ -51,7 +48,6 @@ CONFIG_TC35815=y
CONFIG_SERIAL_TXX9_CONSOLE=y
CONFIG_SERIAL_TXX9_STDSERIAL=y
CONFIG_SPI=y
CONFIG_SPI_TXX9=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_TXX9_WDT=m
......@@ -65,8 +61,6 @@ CONFIG_SND=m
# CONFIG_SND_SPI is not set
# CONFIG_SND_MIPS is not set
CONFIG_SND_SOC=m
CONFIG_SND_SOC_TXX9ACLC=m
CONFIG_SND_SOC_TXX9ACLC_GENERIC=m
# CONFIG_USB_SUPPORT is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
......@@ -78,7 +72,6 @@ CONFIG_RTC_CLASS=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_RS5C348=y
CONFIG_RTC_DRV_DS1742=y
CONFIG_RTC_DRV_TX4939=y
CONFIG_DMADEVICES=y
CONFIG_TXX9_DMAC=m
# CONFIG_DNOTIFY is not set
......
arch/mips/configs/rm200_defconfig
View file @ fb443f36
......@@ -29,9 +29,6 @@ CONFIG_NET_IPIP=m
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6_ROUTER_PREF=y
CONFIG_IPV6_ROUTE_INFO=y
......@@ -39,7 +36,6 @@ CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
......@@ -192,9 +188,7 @@ CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_SX8=m
CONFIG_BLK_DEV_RAM=m
CONFIG_CDROM_PKTCDVD=m
CONFIG_ATA_OVER_ETH=m
......@@ -400,7 +394,6 @@ CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_BLOWFISH=m
......
arch/mips/configs/rt305x_defconfig
View file @ fb443f36
......@@ -35,9 +35,6 @@ CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_SYN_COOKIES=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
......@@ -140,7 +137,6 @@ CONFIG_CRC32_SARWATE=y
# CONFIG_XZ_DEC_ARMTHUMB is not set
# CONFIG_XZ_DEC_SPARC is not set
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_STRIP_ASM_SYMS=y
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
......
arch/mips/configs/sb1250_swarm_defconfig
View file @ fb443f36
......@@ -88,7 +88,6 @@ CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
......@@ -96,7 +95,6 @@ CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_DEFLATE=m
......
arch/mips/configs/vocore2_defconfig
View file @ fb443f36
......@@ -35,9 +35,6 @@ CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set
......
arch/mips/configs/xway_defconfig
View file @ fb443f36
......@@ -37,9 +37,6 @@ CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_MROUTE=y
CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
CONFIG_SYN_COOKIES=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
......@@ -146,7 +143,6 @@ CONFIG_CRYPTO_ARC4=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32_SARWATE=y
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_STRIP_ASM_SYMS=y
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
......
arch/mips/include/asm/irq.h
View file @ fb443f36
......@@ -63,10 +63,6 @@ extern void do_domain_IRQ(struct irq_domain *domain, unsigned int irq);
extern void arch_init_irq(void);
extern void spurious_interrupt(void);
extern int allocate_irqno(void);
extern void alloc_legacy_irqno(void);
extern void free_irqno(unsigned int irq);
/*
* Before R2 the timer and performance counter interrupts were both fixed to
* IE7. Since R2 their number has to be read from the c0_intctl register.
......
arch/mips/include/asm/mach-ar7/ar7.h
View file @ fb443f36
......@@ -104,8 +104,6 @@ struct plat_dsl_data {
int reset_bit_sar;
};
extern int ar7_cpu_clock, ar7_bus_clock, ar7_dsp_clock;
static inline int ar7_is_titan(void)
{
return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x24)) & 0xffff) ==
......
arch/mips/include/asm/octeon/cvmx-fpa.h
View file @ fb443f36
......@@ -263,26 +263,6 @@ static inline void cvmx_fpa_free(void *ptr, uint64_t pool,
cvmx_write_io(newptr.u64, num_cache_lines);
}
/**
* Setup a FPA pool to control a new block of memory.
* This can only be called once per pool. Make sure proper
* locking enforces this.
*
* @pool: Pool to initialize
* 0 <= pool < 8
* @name: Constant character string to name this pool.
* String is not copied.
* @buffer: Pointer to the block of memory to use. This must be
* accessible by all processors and external hardware.
* @block_size: Size for each block controlled by the FPA
* @num_blocks: Number of blocks
*
* Returns 0 on Success,
* -1 on failure
*/
extern int cvmx_fpa_setup_pool(uint64_t pool, const char *name, void *buffer,
uint64_t block_size, uint64_t num_blocks);
/**
* Shutdown a Memory pool and validate that it had all of
* the buffers originally placed in it. This should only be
......
arch/mips/include/asm/octeon/octeon.h
View file @ fb443f36
......@@ -43,7 +43,6 @@ extern int octeon_get_southbridge_interrupt(void);
extern int octeon_get_boot_coremask(void);
extern int octeon_get_boot_num_arguments(void);
extern const char *octeon_get_boot_argument(int arg);
extern void octeon_hal_setup_reserved32(void);
extern void octeon_user_io_init(void);
extern void octeon_init_cvmcount(void);
......
arch/mips/include/asm/octeon/pci-octeon.h
View file @ fb443f36
......@@ -64,6 +64,4 @@ enum octeon_dma_bar_type {
extern enum octeon_dma_bar_type octeon_dma_bar_type;
void octeon_pci_dma_init(void);
extern char *octeon_swiotlb;
#endif
arch/mips/include/asm/sibyte/sb1250.h
View file @ fb443f36
......@@ -32,7 +32,6 @@ extern unsigned int soc_type;
extern unsigned int periph_rev;
extern unsigned int zbbus_mhz;
extern void sb1250_time_init(void);
extern void sb1250_mask_irq(int cpu, int irq);
extern void sb1250_unmask_irq(int cpu, int irq);
......
arch/mips/include/asm/sni.h
View file @ fb443f36
......@@ -226,9 +226,6 @@ extern void sni_pcit_cplus_irq_init(void);
extern void sni_rm200_irq_init(void);
extern void sni_pcimt_irq_init(void);
/* timer inits */
extern void sni_cpu_time_init(void);
/* eisa init for RM200/400 */
#ifdef CONFIG_EISA
extern int sni_eisa_root_init(void);
......
arch/mips/kernel/prom.c
View file @ fb443f36
......@@ -26,7 +26,7 @@ __init void mips_set_machine_name(const char *name)
if (name == NULL)
return;
strlcpy(mips_machine_name, name, sizeof(mips_machine_name));
strscpy(mips_machine_name, name, sizeof(mips_machine_name));
pr_info("MIPS: machine is %s\n", mips_get_machine_name());
}
......@@ -52,9 +52,9 @@ int __init __dt_register_buses(const char *bus0, const char *bus1)
if (!of_have_populated_dt())
panic("device tree not present");
strlcpy(of_ids[0].compatible, bus0, sizeof(of_ids[0].compatible));
strscpy(of_ids[0].compatible, bus0, sizeof(of_ids[0].compatible));
if (bus1) {
strlcpy(of_ids[1].compatible, bus1,
strscpy(of_ids[1].compatible, bus1,
sizeof(of_ids[1].compatible));
}
......
arch/mips/kernel/relocate.c
View file @ fb443f36
......@@ -340,7 +340,7 @@ void *__init relocate_kernel(void)
early_init_dt_scan(fdt);
if (boot_command_line[0]) {
/* Boot command line was passed in device tree */
strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
strscpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
}
#endif /* CONFIG_USE_OF */
......
arch/mips/kernel/segment.c
View file @ fb443f36
......@@ -46,7 +46,7 @@ static void build_segment_config(char *str, unsigned int cfg)
((cfg & MIPS_SEGCFG_EU) >> MIPS_SEGCFG_EU_SHIFT));
}
static int show_segments(struct seq_file *m, void *v)
static int segments_show(struct seq_file *m, void *v)
{
unsigned int segcfg;
char str[42];
......@@ -80,18 +80,7 @@ static int show_segments(struct seq_file *m, void *v)
return 0;
}
static int segments_open(struct inode *inode, struct file *file)
{
return single_open(file, show_segments, NULL);
}
static const struct file_operations segments_fops = {
.open = segments_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
DEFINE_SHOW_ATTRIBUTE(segments);
static int __init segments_info(void)
{
......
arch/mips/kernel/setup.c
View file @ fb443f36
......@@ -42,6 +42,7 @@
#include <asm/setup.h>
#include <asm/smp-ops.h>
#include <asm/prom.h>
#include <asm/fw/fw.h>
#ifdef CONFIG_MIPS_ELF_APPENDED_DTB
char __section(".appended_dtb") __appended_dtb[0x100000];
......@@ -756,6 +757,24 @@ static void __init prefill_possible_map(void)
static inline void prefill_possible_map(void) {}
#endif
static void __init setup_rng_seed(void)
{
char *rng_seed_hex = fw_getenv("rngseed");
u8 rng_seed[512];
size_t len;
if (!rng_seed_hex)
return;
len = min(sizeof(rng_seed), strlen(rng_seed_hex) / 2);
if (hex2bin(rng_seed, rng_seed_hex, len))
return;
add_bootloader_randomness(rng_seed, len);
memzero_explicit(rng_seed, len);
memzero_explicit(rng_seed_hex, len * 2);
}
void __init setup_arch(char **cmdline_p)
{
cpu_probe();
......@@ -786,6 +805,8 @@ void __init setup_arch(char **cmdline_p)
paging_init();
memblock_dump_all();
setup_rng_seed();
}
unsigned long kernelsp[NR_CPUS];
......
arch/mips/lantiq/prom.c
View file @ fb443f36
......@@ -34,6 +34,14 @@ unsigned long physical_memsize = 0L;
*/
static struct ltq_soc_info soc_info;
/*
* These structs are used to override vsmp_init_secondary()
*/
#if defined(CONFIG_MIPS_MT_SMP)
extern const struct plat_smp_ops vsmp_smp_ops;
static struct plat_smp_ops lantiq_smp_ops;
#endif
const char *get_system_type(void)
{
return soc_info.sys_type;
......@@ -84,6 +92,17 @@ void __init plat_mem_setup(void)
__dt_setup_arch(dtb);
}
#if defined(CONFIG_MIPS_MT_SMP)
static void lantiq_init_secondary(void)
{
/*
* MIPS CPU startup function vsmp_init_secondary() will only
* enable some of the interrupts for the second CPU/VPE.
*/
set_c0_status(ST0_IM);
}
#endif
void __init prom_init(void)
{
/* call the soc specific detetcion code and get it to fill soc_info */
......@@ -95,7 +114,10 @@ void __init prom_init(void)
prom_init_cmdline();
#if defined(CONFIG_MIPS_MT_SMP)
if (register_vsmp_smp_ops())
panic("failed to register_vsmp_smp_ops()");
if (cpu_has_mipsmt) {
lantiq_smp_ops = vsmp_smp_ops;
lantiq_smp_ops.init_secondary = lantiq_init_secondary;
register_smp_ops(&lantiq_smp_ops);
}
#endif
}
arch/mips/lantiq/xway/vmmc.c
View file @ fb443f36
......@@ -4,9 +4,10 @@
* Copyright (C) 2012 John Crispin <john@phrozen.org>
*/
#include <linux/err.h>
#include <linux/export.h>
#include <linux/gpio/consumer.h>
#include <linux/of_platform.h>
#include <linux/of_gpio.h>
#include <linux/dma-mapping.h>
#include <lantiq_soc.h>
......@@ -25,23 +26,28 @@ EXPORT_SYMBOL(ltq_get_cp1_base);
static int vmmc_probe(struct platform_device *pdev)
{
#define CP1_SIZE (1 << 20)
struct gpio_desc *gpio;
int gpio_count;
dma_addr_t dma;
int error;
cp1_base =
(void *) CPHYSADDR(dma_alloc_coherent(&pdev->dev, CP1_SIZE,
&dma, GFP_KERNEL));
gpio_count = of_gpio_count(pdev->dev.of_node);
gpio_count = gpiod_count(&pdev->dev, NULL);
while (gpio_count > 0) {
enum of_gpio_flags flags;
int gpio = of_get_gpio_flags(pdev->dev.of_node,
--gpio_count, &flags);
if (gpio_request(gpio, "vmmc-relay"))
gpio = devm_gpiod_get_index(&pdev->dev,
NULL, --gpio_count, GPIOD_OUT_HIGH);
error = PTR_ERR_OR_ZERO(gpio);
if (error) {
dev_err(&pdev->dev,
"failed to request GPIO idx %d: %d\n",
gpio_count, error);
continue;
dev_info(&pdev->dev, "requested GPIO %d\n", gpio);
gpio_direction_output(gpio,
(flags & OF_GPIO_ACTIVE_LOW) ? (0) : (1));
}
gpiod_set_consumer_name(gpio, "vmmc-relay");
}
dev_info(&pdev->dev, "reserved %dMB at 0x%p", CP1_SIZE >> 20, cp1_base);
......
arch/mips/lib/bswapdi.c
View file @ fb443f36
// SPDX-License-Identifier: GPL-2.0
#include <linux/export.h>
#include <linux/compiler.h>
#include <uapi/linux/swab.h>
/* To silence -Wmissing-prototypes. */
unsigned long long __bswapdi2(unsigned long long u);
unsigned long long notrace __bswapdi2(unsigned long long u)
{
return (((u) & 0xff00000000000000ull) >> 56) |
(((u) & 0x00ff000000000000ull) >> 40) |
(((u) & 0x0000ff0000000000ull) >> 24) |
(((u) & 0x000000ff00000000ull) >> 8) |
(((u) & 0x00000000ff000000ull) << 8) |
(((u) & 0x0000000000ff0000ull) << 24) |
(((u) & 0x000000000000ff00ull) << 40) |
(((u) & 0x00000000000000ffull) << 56);
return ___constant_swab64(u);
}
EXPORT_SYMBOL(__bswapdi2);
arch/mips/lib/bswapsi.c
View file @ fb443f36
// SPDX-License-Identifier: GPL-2.0
#include <linux/export.h>
#include <linux/compiler.h>
#include <uapi/linux/swab.h>
/* To silence -Wmissing-prototypes. */
unsigned int __bswapsi2(unsigned int u);
unsigned int notrace __bswapsi2(unsigned int u)
{
return (((u) & 0xff000000) >> 24) |
(((u) & 0x00ff0000) >> 8) |
(((u) & 0x0000ff00) << 8) |
(((u) & 0x000000ff) << 24);
return ___constant_swab32(u);
}
EXPORT_SYMBOL(__bswapsi2);
arch/mips/loongson2ef/common/pci.c
View file @ fb443f36
......@@ -73,8 +73,6 @@ static void __init setup_pcimap(void)
#endif
}
extern int sbx00_acpi_init(void);
static int __init pcibios_init(void)
{
setup_pcimap();
......
arch/mips/math-emu/cp1emu.c
View file @ fb443f36
......@@ -1032,7 +1032,7 @@ static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
*/
if (dec_insn.micro_mips_mode) {
/*
* If next instruction is a 16-bit instruction, then it
* If next instruction is a 16-bit instruction, then
* it cannot be a FPU instruction. This could happen
* since we can be called for non-FPU instructions.
*/
......
arch/mips/pci/pci-ar2315.c
View file @ fb443f36
......@@ -2,7 +2,7 @@
/*
*/
/**
/*
* Both AR2315 and AR2316 chips have PCI interface unit, which supports DMA
* and interrupt. PCI interface supports MMIO access method, but does not
* seem to support I/O ports.
......
arch/mips/pci/pci-lantiq.c
View file @ fb443f36
......@@ -9,11 +9,11 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/mm.h>
#include <linux/vmalloc.h>
#include <linux/clk.h>
#include <linux/of_platform.h>
#include <linux/of_gpio.h>
#include <linux/of_irq.h>
#include <linux/of_pci.h>
......@@ -62,7 +62,7 @@
__iomem void *ltq_pci_mapped_cfg;
static __iomem void *ltq_pci_membase;
static int reset_gpio;
static struct gpio_desc *reset_gpio;
static struct clk *clk_pci, *clk_external;
static struct resource pci_io_resource;
static struct resource pci_mem_resource;
......@@ -95,6 +95,7 @@ static int ltq_pci_startup(struct platform_device *pdev)
struct device_node *node = pdev->dev.of_node;
const __be32 *req_mask, *bus_clk;
u32 temp_buffer;
int error;
/* get our clocks */
clk_pci = clk_get(&pdev->dev, NULL);
......@@ -123,17 +124,14 @@ static int ltq_pci_startup(struct platform_device *pdev)
clk_disable(clk_external);
/* setup reset gpio used by pci */
reset_gpio = of_get_named_gpio(node, "gpio-reset", 0);
if (gpio_is_valid(reset_gpio)) {
int ret = devm_gpio_request(&pdev->dev,
reset_gpio, "pci-reset");
if (ret) {
dev_err(&pdev->dev,
"failed to request gpio %d\n", reset_gpio);
return ret;
}
gpio_direction_output(reset_gpio, 1);
reset_gpio = devm_gpiod_get_optional(&pdev->dev, "reset",
GPIOD_OUT_LOW);
error = PTR_ERR_OR_ZERO(reset_gpio);
if (error) {
dev_err(&pdev->dev, "failed to request gpio: %d\n", error);
return error;
}
gpiod_set_consumer_name(reset_gpio, "pci_reset");
/* enable auto-switching between PCI and EBU */
ltq_pci_w32(0xa, PCI_CR_CLK_CTRL);
......@@ -195,11 +193,11 @@ static int ltq_pci_startup(struct platform_device *pdev)
ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_IEN) | 0x10, LTQ_EBU_PCC_IEN);
/* toggle reset pin */
if (gpio_is_valid(reset_gpio)) {
__gpio_set_value(reset_gpio, 0);
if (reset_gpio) {
gpiod_set_value_cansleep(reset_gpio, 1);
wmb();
mdelay(1);
__gpio_set_value(reset_gpio, 1);
gpiod_set_value_cansleep(reset_gpio, 0);
}
return 0;
}
......
arch/mips/pic32/pic32mzda/init.c
View file @ fb443f36
......@@ -44,7 +44,7 @@ void __init plat_mem_setup(void)
pr_info(" builtin_cmdline : %s\n", CONFIG_CMDLINE);
#endif
if (dtb != __dtb_start)
strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
strscpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE);
#ifdef CONFIG_EARLY_PRINTK
fw_init_early_console(-1);
......
arch/mips/ralink/bootrom.c
View file @ fb443f36
......@@ -18,22 +18,11 @@ static int bootrom_show(struct seq_file *s, void *unused)
return 0;
}
static int bootrom_open(struct inode *inode, struct file *file)
{
return single_open(file, bootrom_show, NULL);
}
static const struct file_operations bootrom_file_ops = {
.open = bootrom_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
DEFINE_SHOW_ATTRIBUTE(bootrom);
static int __init bootrom_setup(void)
{
debugfs_create_file("bootrom", 0444, NULL, NULL, &bootrom_file_ops);
debugfs_create_file("bootrom", 0444, NULL, NULL, &bootrom_fops);
return 0;
}
......
arch/mips/sgi-ip27/ip27-xtalk.c
View file @ fb443f36
......@@ -27,15 +27,18 @@ static void bridge_platform_create(nasid_t nasid, int widget, int masterwid)
{
struct xtalk_bridge_platform_data *bd;
struct sgi_w1_platform_data *wd;
struct platform_device *pdev;
struct platform_device *pdev_wd;
struct platform_device *pdev_bd;
struct resource w1_res;
unsigned long offset;
offset = NODE_OFFSET(nasid);
wd = kzalloc(sizeof(*wd), GFP_KERNEL);
if (!wd)
goto no_mem;
if (!wd) {
pr_warn("xtalk:n%d/%x bridge create out of memory\n", nasid, widget);
return;
}
snprintf(wd->dev_id, sizeof(wd->dev_id), "bridge-%012lx",
offset + (widget << SWIN_SIZE_BITS));
......@@ -46,24 +49,35 @@ static void bridge_platform_create(nasid_t nasid, int widget, int masterwid)
w1_res.end = w1_res.start + 3;
w1_res.flags = IORESOURCE_MEM;
pdev = platform_device_alloc("sgi_w1", PLATFORM_DEVID_AUTO);
if (!pdev) {
kfree(wd);
goto no_mem;
pdev_wd = platform_device_alloc("sgi_w1", PLATFORM_DEVID_AUTO);
if (!pdev_wd) {
pr_warn("xtalk:n%d/%x bridge create out of memory\n", nasid, widget);
goto err_kfree_wd;
}
if (platform_device_add_resources(pdev_wd, &w1_res, 1)) {
pr_warn("xtalk:n%d/%x bridge failed to add platform resources.\n", nasid, widget);
goto err_put_pdev_wd;
}
if (platform_device_add_data(pdev_wd, wd, sizeof(*wd))) {
pr_warn("xtalk:n%d/%x bridge failed to add platform data.\n", nasid, widget);
goto err_put_pdev_wd;
}
if (platform_device_add(pdev_wd)) {
pr_warn("xtalk:n%d/%x bridge failed to add platform device.\n", nasid, widget);
goto err_put_pdev_wd;
}
platform_device_add_resources(pdev, &w1_res, 1);
platform_device_add_data(pdev, wd, sizeof(*wd));
/* platform_device_add_data() duplicates the data */
kfree(wd);
platform_device_add(pdev);
bd = kzalloc(sizeof(*bd), GFP_KERNEL);
if (!bd)
goto no_mem;
pdev = platform_device_alloc("xtalk-bridge", PLATFORM_DEVID_AUTO);
if (!pdev) {
kfree(bd);
goto no_mem;
if (!bd) {
pr_warn("xtalk:n%d/%x bridge create out of memory\n", nasid, widget);
goto err_unregister_pdev_wd;
}
pdev_bd = platform_device_alloc("xtalk-bridge", PLATFORM_DEVID_AUTO);
if (!pdev_bd) {
pr_warn("xtalk:n%d/%x bridge create out of memory\n", nasid, widget);
goto err_kfree_bd;
}
......@@ -84,15 +98,31 @@ static void bridge_platform_create(nasid_t nasid, int widget, int masterwid)
bd->io.flags = IORESOURCE_IO;
bd->io_offset = offset;
platform_device_add_data(pdev, bd, sizeof(*bd));
if (platform_device_add_data(pdev_bd, bd, sizeof(*bd))) {
pr_warn("xtalk:n%d/%x bridge failed to add platform data.\n", nasid, widget);
goto err_put_pdev_bd;
}
if (platform_device_add(pdev_bd)) {
pr_warn("xtalk:n%d/%x bridge failed to add platform device.\n", nasid, widget);
goto err_put_pdev_bd;
}
/* platform_device_add_data() duplicates the data */
kfree(bd);
platform_device_add(pdev);
pr_info("xtalk:n%d/%x bridge widget\n", nasid, widget);
return;
no_mem:
pr_warn("xtalk:n%d/%x bridge create out of memory\n", nasid, widget);
err_put_pdev_bd:
platform_device_put(pdev_bd);
err_kfree_bd:
kfree(bd);
err_unregister_pdev_wd:
platform_device_unregister(pdev_wd);
return;
err_put_pdev_wd:
platform_device_put(pdev_wd);
err_kfree_wd:
kfree(wd);
return;
}
static int probe_one_port(nasid_t nasid, int widget, int masterwid)
......
arch/mips/sgi-ip30/ip30-xtalk.c
View file @ fb443f36
......@@ -40,12 +40,15 @@ static void bridge_platform_create(int widget, int masterwid)
{
struct xtalk_bridge_platform_data *bd;
struct sgi_w1_platform_data *wd;
struct platform_device *pdev;
struct platform_device *pdev_wd;
struct platform_device *pdev_bd;
struct resource w1_res;
wd = kzalloc(sizeof(*wd), GFP_KERNEL);
if (!wd)
goto no_mem;
if (!wd) {
pr_warn("xtalk:%x bridge create out of memory\n", widget);
return;
}
snprintf(wd->dev_id, sizeof(wd->dev_id), "bridge-%012lx",
IP30_SWIN_BASE(widget));
......@@ -56,24 +59,35 @@ static void bridge_platform_create(int widget, int masterwid)
w1_res.end = w1_res.start + 3;
w1_res.flags = IORESOURCE_MEM;
pdev = platform_device_alloc("sgi_w1", PLATFORM_DEVID_AUTO);
if (!pdev) {
kfree(wd);
goto no_mem;
pdev_wd = platform_device_alloc("sgi_w1", PLATFORM_DEVID_AUTO);
if (!pdev_wd) {
pr_warn("xtalk:%x bridge create out of memory\n", widget);
goto err_kfree_wd;
}
if (platform_device_add_resources(pdev_wd, &w1_res, 1)) {
pr_warn("xtalk:%x bridge failed to add platform resources.\n", widget);
goto err_put_pdev_wd;
}
if (platform_device_add_data(pdev_wd, wd, sizeof(*wd))) {
pr_warn("xtalk:%x bridge failed to add platform data.\n", widget);
goto err_put_pdev_wd;
}
if (platform_device_add(pdev_wd)) {
pr_warn("xtalk:%x bridge failed to add platform device.\n", widget);
goto err_put_pdev_wd;
}
platform_device_add_resources(pdev, &w1_res, 1);
platform_device_add_data(pdev, wd, sizeof(*wd));
/* platform_device_add_data() duplicates the data */
kfree(wd);
platform_device_add(pdev);
bd = kzalloc(sizeof(*bd), GFP_KERNEL);
if (!bd)
goto no_mem;
pdev = platform_device_alloc("xtalk-bridge", PLATFORM_DEVID_AUTO);
if (!pdev) {
kfree(bd);
goto no_mem;
if (!bd) {
pr_warn("xtalk:%x bridge create out of memory\n", widget);
goto err_unregister_pdev_wd;
}
pdev_bd = platform_device_alloc("xtalk-bridge", PLATFORM_DEVID_AUTO);
if (!pdev_bd) {
pr_warn("xtalk:%x bridge create out of memory\n", widget);
goto err_kfree_bd;
}
bd->bridge_addr = IP30_RAW_SWIN_BASE(widget);
......@@ -93,15 +107,31 @@ static void bridge_platform_create(int widget, int masterwid)
bd->io.flags = IORESOURCE_IO;
bd->io_offset = IP30_SWIN_BASE(widget);
platform_device_add_data(pdev, bd, sizeof(*bd));
if (platform_device_add_data(pdev_bd, bd, sizeof(*bd))) {
pr_warn("xtalk:%x bridge failed to add platform data.\n", widget);
goto err_put_pdev_bd;
}
if (platform_device_add(pdev_bd)) {
pr_warn("xtalk:%x bridge failed to add platform device.\n", widget);
goto err_put_pdev_bd;
}
/* platform_device_add_data() duplicates the data */
kfree(bd);
platform_device_add(pdev);
pr_info("xtalk:%x bridge widget\n", widget);
return;
no_mem:
pr_warn("xtalk:%x bridge create out of memory\n", widget);
err_put_pdev_bd:
platform_device_put(pdev_bd);
err_kfree_bd:
kfree(bd);
err_unregister_pdev_wd:
platform_device_unregister(pdev_wd);
return;
err_put_pdev_wd:
platform_device_put(pdev_wd);
err_kfree_wd:
kfree(wd);
return;
}
static unsigned int __init xbow_widget_active(s8 wid)
......
arch/mips/sibyte/sb1250/irq.c
View file @ fb443f36
......@@ -262,12 +262,6 @@ void __init arch_init_irq(void)
__raw_writeq(tmp, IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MASK)));
__raw_writeq(tmp, IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MASK)));
/*
* Note that the timer interrupts are also mapped, but this is
* done in sb1250_time_init(). Also, the profiling driver
* does its own management of IP7.
*/
/* Enable necessary IPs, disable the rest */
change_c0_status(ST0_IM, imask);
}
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7