Commit fb575b85 authored by Jaedon Shin's avatar Jaedon Shin Committed by Ralf Baechle

MIPS: BMIPS: Add I2C node for bcm7360

Add I2C device nodes to BMIPS based BCM7360 platform.
Signed-off-by: default avatarJaedon Shin <jaedon.shin@gmail.com>
Acked-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Kamal Dasu <kdasu.kdev@gmail.com>
Cc: linux-i2c@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11335/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent ad837838
...@@ -81,14 +81,32 @@ upg_irq0_intc: upg_irq0_intc@406600 { ...@@ -81,14 +81,32 @@ upg_irq0_intc: upg_irq0_intc@406600 {
compatible = "brcm,bcm7120-l2-intc"; compatible = "brcm,bcm7120-l2-intc";
reg = <0x406600 0x8>; reg = <0x406600 0x8>;
brcm,int-map-mask = <0x44>; brcm,int-map-mask = <0x44>, <0x7000000>;
brcm,int-fwd-mask = <0x70000>; brcm,int-fwd-mask = <0x70000>;
interrupt-controller; interrupt-controller;
#interrupt-cells = <1>; #interrupt-cells = <1>;
interrupt-parent = <&periph_intc>; interrupt-parent = <&periph_intc>;
interrupts = <56>; interrupts = <56>, <54>;
interrupt-names = "upg_main", "upg_bsc";
};
upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 {
compatible = "brcm,bcm7120-l2-intc";
reg = <0x408b80 0x8>;
brcm,int-map-mask = <0x40>, <0x8000000>, <0x100000>;
brcm,int-fwd-mask = <0>;
brcm,irq-can-wake;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-parent = <&periph_intc>;
interrupts = <57>, <55>, <59>;
interrupt-names = "upg_main_aon", "upg_bsc_aon",
"upg_spi";
}; };
sun_top_ctrl: syscon@404000 { sun_top_ctrl: syscon@404000 {
...@@ -138,6 +156,46 @@ uart2: serial@406880 { ...@@ -138,6 +156,46 @@ uart2: serial@406880 {
status = "disabled"; status = "disabled";
}; };
bsca: i2c@406200 {
clock-frequency = <390000>;
compatible = "brcm,brcmstb-i2c";
interrupt-parent = <&upg_irq0_intc>;
reg = <0x406200 0x58>;
interrupts = <24>;
interrupt-names = "upg_bsca";
status = "disabled";
};
bscb: i2c@406280 {
clock-frequency = <390000>;
compatible = "brcm,brcmstb-i2c";
interrupt-parent = <&upg_irq0_intc>;
reg = <0x406280 0x58>;
interrupts = <25>;
interrupt-names = "upg_bscb";
status = "disabled";
};
bscc: i2c@406300 {
clock-frequency = <390000>;
compatible = "brcm,brcmstb-i2c";
interrupt-parent = <&upg_irq0_intc>;
reg = <0x406300 0x58>;
interrupts = <26>;
interrupt-names = "upg_bscc";
status = "disabled";
};
bscd: i2c@408980 {
clock-frequency = <390000>;
compatible = "brcm,brcmstb-i2c";
interrupt-parent = <&upg_aon_irq0_intc>;
reg = <0x408980 0x58>;
interrupts = <27>;
interrupt-names = "upg_bscd";
status = "disabled";
};
enet0: ethernet@430000 { enet0: ethernet@430000 {
phy-mode = "internal"; phy-mode = "internal";
phy-handle = <&phy1>; phy-handle = <&phy1>;
......
...@@ -29,6 +29,22 @@ &uart2 { ...@@ -29,6 +29,22 @@ &uart2 {
status = "okay"; status = "okay";
}; };
&bsca {
status = "okay";
};
&bscb {
status = "okay";
};
&bscc {
status = "okay";
};
&bscd {
status = "okay";
};
&enet0 { &enet0 {
status = "okay"; status = "okay";
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment