Commit fb9a33ae authored by Linus Walleij's avatar Linus Walleij Committed by Sebastian Reichel

power: supply: gpio_charger: switch to using GPIO descriptors

The GPIO charger is using a mix of the legacy GPIO interface
and <linux/of_gpio.h> which is not the modern way to use GPIOs.

Refactor like this:

- Use a GPIO descriptor for the GPIO line used to monitor the
  charger.
- Fetch the descriptor with devm_gpiod_get() as the first
  method.
- If this fails and we are *not* using device tree, then
  start looking to see if we can use platform data instead.
- After looking up and requesting a GPIO number with the
  legacy API, convert it to a descriptor.

This way we can later isolate and drop the legacy code as
more platforms move over to using descriptors.

Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarSebastian Reichel <sre@kernel.org>
parent c56ca24a
......@@ -14,7 +14,7 @@
*/
#include <linux/device.h>
#include <linux/gpio.h>
#include <linux/gpio.h> /* For legacy platform data */
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
......@@ -23,7 +23,7 @@
#include <linux/power_supply.h>
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/power/gpio-charger.h>
......@@ -34,6 +34,8 @@ struct gpio_charger {
struct power_supply *charger;
struct power_supply_desc charger_desc;
struct gpio_desc *gpiod;
bool legacy_gpio_requested;
};
static irqreturn_t gpio_charger_irq(int irq, void *devid)
......@@ -58,7 +60,8 @@ static int gpio_charger_get_property(struct power_supply *psy,
switch (psp) {
case POWER_SUPPLY_PROP_ONLINE:
val->intval = !!gpio_get_value_cansleep(pdata->gpio);
val->intval = gpiod_get_value_cansleep(gpio_charger->gpiod);
/* This xor is only ever used with legacy pdata GPIO */
val->intval ^= pdata->gpio_active_low;
break;
default:
......@@ -78,7 +81,6 @@ struct gpio_charger_platform_data *gpio_charger_parse_dt(struct device *dev)
struct device_node *np = dev->of_node;
struct gpio_charger_platform_data *pdata;
const char *chargetype;
enum of_gpio_flags flags;
int ret;
if (!np)
......@@ -89,16 +91,6 @@ struct gpio_charger_platform_data *gpio_charger_parse_dt(struct device *dev)
return ERR_PTR(-ENOMEM);
pdata->name = np->name;
pdata->gpio = of_get_gpio_flags(np, 0, &flags);
if (pdata->gpio < 0) {
if (pdata->gpio != -EPROBE_DEFER)
dev_err(dev, "could not get charger gpio\n");
return ERR_PTR(pdata->gpio);
}
pdata->gpio_active_low = !!(flags & OF_GPIO_ACTIVE_LOW);
pdata->type = POWER_SUPPLY_TYPE_UNKNOWN;
ret = of_property_read_string(np, "charger-type", &chargetype);
if (ret >= 0) {
......@@ -144,11 +136,6 @@ static int gpio_charger_probe(struct platform_device *pdev)
}
}
if (!gpio_is_valid(pdata->gpio)) {
dev_err(&pdev->dev, "Invalid gpio pin\n");
return -EINVAL;
}
gpio_charger = devm_kzalloc(&pdev->dev, sizeof(*gpio_charger),
GFP_KERNEL);
if (!gpio_charger) {
......@@ -156,6 +143,45 @@ static int gpio_charger_probe(struct platform_device *pdev)
return -ENOMEM;
}
/*
* This will fetch a GPIO descriptor from device tree, ACPI or
* boardfile descriptor tables. It's good to try this first.
*/
gpio_charger->gpiod = devm_gpiod_get(&pdev->dev, NULL, GPIOD_IN);
/*
* If this fails and we're not using device tree, try the
* legacy platform data method.
*/
if (IS_ERR(gpio_charger->gpiod) && !pdev->dev.of_node) {
/* Non-DT: use legacy GPIO numbers */
if (!gpio_is_valid(pdata->gpio)) {
dev_err(&pdev->dev, "Invalid gpio pin in pdata\n");
return -EINVAL;
}
ret = gpio_request(pdata->gpio, dev_name(&pdev->dev));
if (ret) {
dev_err(&pdev->dev, "Failed to request gpio pin: %d\n",
ret);
return ret;
}
gpio_charger->legacy_gpio_requested = true;
ret = gpio_direction_input(pdata->gpio);
if (ret) {
dev_err(&pdev->dev, "Failed to set gpio to input: %d\n",
ret);
goto err_gpio_free;
}
/* Then convert this to gpiod for now */
gpio_charger->gpiod = gpio_to_desc(pdata->gpio);
} else if (IS_ERR(gpio_charger->gpiod)) {
/* Just try again if this happens */
if (PTR_ERR(gpio_charger->gpiod) == -EPROBE_DEFER)
return -EPROBE_DEFER;
dev_err(&pdev->dev, "error getting GPIO descriptor\n");
return PTR_ERR(gpio_charger->gpiod);
}
charger_desc = &gpio_charger->charger_desc;
charger_desc->name = pdata->name ? pdata->name : "gpio-charger";
......@@ -169,17 +195,6 @@ static int gpio_charger_probe(struct platform_device *pdev)
psy_cfg.of_node = pdev->dev.of_node;
psy_cfg.drv_data = gpio_charger;
ret = gpio_request(pdata->gpio, dev_name(&pdev->dev));
if (ret) {
dev_err(&pdev->dev, "Failed to request gpio pin: %d\n", ret);
goto err_free;
}
ret = gpio_direction_input(pdata->gpio);
if (ret) {
dev_err(&pdev->dev, "Failed to set gpio to input: %d\n", ret);
goto err_gpio_free;
}
gpio_charger->pdata = pdata;
gpio_charger->charger = power_supply_register(&pdev->dev,
......@@ -191,7 +206,7 @@ static int gpio_charger_probe(struct platform_device *pdev)
goto err_gpio_free;
}
irq = gpio_to_irq(pdata->gpio);
irq = gpiod_to_irq(gpio_charger->gpiod);
if (irq > 0) {
ret = request_any_context_irq(irq, gpio_charger_irq,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
......@@ -209,8 +224,8 @@ static int gpio_charger_probe(struct platform_device *pdev)
return 0;
err_gpio_free:
if (gpio_charger->legacy_gpio_requested)
gpio_free(pdata->gpio);
err_free:
return ret;
}
......@@ -223,6 +238,7 @@ static int gpio_charger_remove(struct platform_device *pdev)
power_supply_unregister(gpio_charger->charger);
if (gpio_charger->legacy_gpio_requested)
gpio_free(gpio_charger->pdata->gpio);
return 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment