Merge tag 'fixes-for-v4.16-rc2' of...

Merge tag 'fixes-for-v4.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus

Felipe writes:

usb: fixes for v4.16-rc2

First set of fixes for current -rc cycle. Most of the changes are on
dwc3 this time around (59%) with some function changes (25%).

Out of the those, the most important fixes are:

- EP0 TRB counter fix on dwc3
- dwc3-omap stopped missing events during suspend/resume
- maxpacket size fix for ep0 in dwc3
- Descriptor processing fix for functionfs

Apart from these, your usual set of important-but-not-so-critical
fixes all over the place.

drivers/usb/dwc2/gadget.c

@@ -1917,7 +1917,9 @@ static void dwc2_hsotg_program_zlp(struct dwc2_hsotg *hsotg,
 		/* Not specific buffer needed for ep0 ZLP */
 		dma_addr_t dma = hs_ep->desc_list_dma;
 
+		if (!index)
 			dwc2_gadget_set_ep0_desc_chain(hsotg, hs_ep);
+
 		dwc2_gadget_config_nonisoc_xfer_ddma(hs_ep, dma, 0);
 	} else {
 		dwc2_writel(DXEPTSIZ_MC(1) | DXEPTSIZ_PKTCNT(1) |
@@ -2974,11 +2976,15 @@ static void dwc2_hsotg_epint(struct dwc2_hsotg *hsotg, unsigned int idx,
 	if (ints & DXEPINT_STSPHSERCVD) {
 		dev_dbg(hsotg->dev, "%s: StsPhseRcvd\n", __func__);
 
+		/* Safety check EP0 state when STSPHSERCVD asserted */
+		if (hsotg->ep0_state == DWC2_EP0_DATA_OUT) {
 			/* Move to STATUS IN for DDMA */
 			if (using_desc_dma(hsotg))
 				dwc2_hsotg_ep0_zlp(hsotg, true);
 		}
 
+	}
+
 	if (ints & DXEPINT_BACK2BACKSETUP)
 		dev_dbg(hsotg->dev, "%s: B2BSetup/INEPNakEff\n", __func__);
 
@@ -3375,12 +3381,6 @@ void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg,
 	dwc2_writel(dwc2_hsotg_ep0_mps(hsotg->eps_out[0]->ep.maxpacket) |
 	       DXEPCTL_USBACTEP, hsotg->regs + DIEPCTL0);
 
-	dwc2_hsotg_enqueue_setup(hsotg);
-
-	dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
-		dwc2_readl(hsotg->regs + DIEPCTL0),
-		dwc2_readl(hsotg->regs + DOEPCTL0));
-
 	/* clear global NAKs */
 	val = DCTL_CGOUTNAK | DCTL_CGNPINNAK;
 	if (!is_usb_reset)
@@ -3391,6 +3391,12 @@ void dwc2_hsotg_core_init_disconnected(struct dwc2_hsotg *hsotg,
 	mdelay(3);
 
 	hsotg->lx_state = DWC2_L0;
+
+	dwc2_hsotg_enqueue_setup(hsotg);
+
+	dev_dbg(hsotg->dev, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n",
+		dwc2_readl(hsotg->regs + DIEPCTL0),
+		dwc2_readl(hsotg->regs + DOEPCTL0));
 }
 
 static void dwc2_hsotg_core_disconnect(struct dwc2_hsotg *hsotg)

drivers/usb/dwc3/core.c

@@ -100,6 +100,8 @@ static void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode)
 	reg &= ~(DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG));
 	reg |= DWC3_GCTL_PRTCAPDIR(mode);
 	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
+
+	dwc->current_dr_role = mode;
 }
 
 static void __dwc3_set_mode(struct work_struct *work)
@@ -133,8 +135,6 @@ static void __dwc3_set_mode(struct work_struct *work)
 
 	dwc3_set_prtcap(dwc, dwc->desired_dr_role);
 
-	dwc->current_dr_role = dwc->desired_dr_role;
-
 	spin_unlock_irqrestore(&dwc->lock, flags);
 
 	switch (dwc->desired_dr_role) {
@@ -219,7 +219,7 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc)
 	 * XHCI driver will reset the host block. If dwc3 was configured for
 	 * host-only mode, then we can return early.
 	 */
-	if (dwc->dr_mode == USB_DR_MODE_HOST)
+	if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST)
 		return 0;
 
 	reg = dwc3_readl(dwc->regs, DWC3_DCTL);
@@ -234,6 +234,9 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc)
 		udelay(1);
 	} while (--retries);
 
+	phy_exit(dwc->usb3_generic_phy);
+	phy_exit(dwc->usb2_generic_phy);
+
 	return -ETIMEDOUT;
 }
 
@@ -483,6 +486,22 @@ static void dwc3_cache_hwparams(struct dwc3 *dwc)
 	parms->hwparams8 = dwc3_readl(dwc->regs, DWC3_GHWPARAMS8);
 }
 
+static int dwc3_core_ulpi_init(struct dwc3 *dwc)
+{
+	int intf;
+	int ret = 0;
+
+	intf = DWC3_GHWPARAMS3_HSPHY_IFC(dwc->hwparams.hwparams3);
+
+	if (intf == DWC3_GHWPARAMS3_HSPHY_IFC_ULPI ||
+	    (intf == DWC3_GHWPARAMS3_HSPHY_IFC_UTMI_ULPI &&
+	     dwc->hsphy_interface &&
+	     !strncmp(dwc->hsphy_interface, "ulpi", 4)))
+		ret = dwc3_ulpi_init(dwc);
+
+	return ret;
+}
+
 /**
  * dwc3_phy_setup - Configure USB PHY Interface of DWC3 Core
  * @dwc: Pointer to our controller context structure
@@ -494,7 +513,6 @@ static void dwc3_cache_hwparams(struct dwc3 *dwc)
 static int dwc3_phy_setup(struct dwc3 *dwc)
 {
 	u32 reg;
-	int ret;
 
 	reg = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0));
 
@@ -565,9 +583,6 @@ static int dwc3_phy_setup(struct dwc3 *dwc)
 		}
 		/* FALLTHROUGH */
 	case DWC3_GHWPARAMS3_HSPHY_IFC_ULPI:
-		ret = dwc3_ulpi_init(dwc);
-		if (ret)
-			return ret;
 		/* FALLTHROUGH */
 	default:
 		break;
@@ -724,6 +739,7 @@ static void dwc3_core_setup_global_control(struct dwc3 *dwc)
 }
 
 static int dwc3_core_get_phy(struct dwc3 *dwc);
+static int dwc3_core_ulpi_init(struct dwc3 *dwc);
 
 /**
  * dwc3_core_init - Low-level initialization of DWC3 Core
@@ -755,17 +771,27 @@ static int dwc3_core_init(struct dwc3 *dwc)
 			dwc->maximum_speed = USB_SPEED_HIGH;
 	}
 
-	ret = dwc3_core_get_phy(dwc);
+	ret = dwc3_phy_setup(dwc);
 	if (ret)
 		goto err0;
 
-	ret = dwc3_core_soft_reset(dwc);
+	if (!dwc->ulpi_ready) {
+		ret = dwc3_core_ulpi_init(dwc);
 		if (ret)
 			goto err0;
+		dwc->ulpi_ready = true;
+	}
 
-	ret = dwc3_phy_setup(dwc);
+	if (!dwc->phys_ready) {
+		ret = dwc3_core_get_phy(dwc);
 		if (ret)
-		goto err0;
+			goto err0a;
+		dwc->phys_ready = true;
+	}
+
+	ret = dwc3_core_soft_reset(dwc);
+	if (ret)
+		goto err0a;
 
 	dwc3_core_setup_global_control(dwc);
 	dwc3_core_num_eps(dwc);
@@ -838,6 +864,9 @@ static int dwc3_core_init(struct dwc3 *dwc)
 	phy_exit(dwc->usb2_generic_phy);
 	phy_exit(dwc->usb3_generic_phy);
 
+err0a:
+	dwc3_ulpi_exit(dwc);
+
 err0:
 	return ret;
 }
@@ -916,7 +945,6 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
 
 	switch (dwc->dr_mode) {
 	case USB_DR_MODE_PERIPHERAL:
-		dwc->current_dr_role = DWC3_GCTL_PRTCAP_DEVICE;
 		dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_DEVICE);
 
 		if (dwc->usb2_phy)
@@ -932,7 +960,6 @@ static int dwc3_core_init_mode(struct dwc3 *dwc)
 		}
 		break;
 	case USB_DR_MODE_HOST:
-		dwc->current_dr_role = DWC3_GCTL_PRTCAP_HOST;
 		dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_HOST);
 
 		if (dwc->usb2_phy)
@@ -1234,7 +1261,6 @@ static int dwc3_probe(struct platform_device *pdev)
 
 err3:
 	dwc3_free_event_buffers(dwc);
-	dwc3_ulpi_exit(dwc);
 
 err2:
 	pm_runtime_allow(&pdev->dev);
@@ -1284,7 +1310,7 @@ static int dwc3_remove(struct platform_device *pdev)
 }
 
 #ifdef CONFIG_PM
-static int dwc3_suspend_common(struct dwc3 *dwc)
+static int dwc3_suspend_common(struct dwc3 *dwc, pm_message_t msg)
 {
 	unsigned long	flags;
 
@@ -1296,6 +1322,10 @@ static int dwc3_suspend_common(struct dwc3 *dwc)
 		dwc3_core_exit(dwc);
 		break;
 	case DWC3_GCTL_PRTCAP_HOST:
+		/* do nothing during host runtime_suspend */
+		if (!PMSG_IS_AUTO(msg))
+			dwc3_core_exit(dwc);
+		break;
 	default:
 		/* do nothing */
 		break;
@@ -1304,7 +1334,7 @@ static int dwc3_suspend_common(struct dwc3 *dwc)
 	return 0;
 }
 
-static int dwc3_resume_common(struct dwc3 *dwc)
+static int dwc3_resume_common(struct dwc3 *dwc, pm_message_t msg)
 {
 	unsigned long	flags;
 	int		ret;
@@ -1320,6 +1350,13 @@ static int dwc3_resume_common(struct dwc3 *dwc)
 		spin_unlock_irqrestore(&dwc->lock, flags);
 		break;
 	case DWC3_GCTL_PRTCAP_HOST:
+		/* nothing to do on host runtime_resume */
+		if (!PMSG_IS_AUTO(msg)) {
+			ret = dwc3_core_init(dwc);
+			if (ret)
+				return ret;
+		}
+		break;
 	default:
 		/* do nothing */
 		break;
@@ -1331,12 +1368,11 @@ static int dwc3_resume_common(struct dwc3 *dwc)
 static int dwc3_runtime_checks(struct dwc3 *dwc)
 {
 	switch (dwc->current_dr_role) {
-	case USB_DR_MODE_PERIPHERAL:
-	case USB_DR_MODE_OTG:
+	case DWC3_GCTL_PRTCAP_DEVICE:
 		if (dwc->connected)
 			return -EBUSY;
 		break;
-	case USB_DR_MODE_HOST:
+	case DWC3_GCTL_PRTCAP_HOST:
 	default:
 		/* do nothing */
 		break;
@@ -1353,7 +1389,7 @@ static int dwc3_runtime_suspend(struct device *dev)
 	if (dwc3_runtime_checks(dwc))
 		return -EBUSY;
 
-	ret = dwc3_suspend_common(dwc);
+	ret = dwc3_suspend_common(dwc, PMSG_AUTO_SUSPEND);
 	if (ret)
 		return ret;
 
@@ -1369,7 +1405,7 @@ static int dwc3_runtime_resume(struct device *dev)
 
 	device_init_wakeup(dev, false);
 
-	ret = dwc3_resume_common(dwc);
+	ret = dwc3_resume_common(dwc, PMSG_AUTO_RESUME);
 	if (ret)
 		return ret;
 
@@ -1416,7 +1452,7 @@ static int dwc3_suspend(struct device *dev)
 	struct dwc3	*dwc = dev_get_drvdata(dev);
 	int		ret;
 
-	ret = dwc3_suspend_common(dwc);
+	ret = dwc3_suspend_common(dwc, PMSG_SUSPEND);
 	if (ret)
 		return ret;
 
@@ -1432,7 +1468,7 @@ static int dwc3_resume(struct device *dev)
 
 	pinctrl_pm_select_default_state(dev);
 
-	ret = dwc3_resume_common(dwc);
+	ret = dwc3_resume_common(dwc, PMSG_RESUME);
 	if (ret)
 		return ret;
 

drivers/usb/dwc3/core.h

@@ -158,13 +158,15 @@
 #define DWC3_GDBGFIFOSPACE_TYPE(n)	(((n) << 5) & 0x1e0)
 #define DWC3_GDBGFIFOSPACE_SPACE_AVAILABLE(n) (((n) >> 16) & 0xffff)
 
-#define DWC3_TXFIFOQ		1
-#define DWC3_RXFIFOQ		3
-#define DWC3_TXREQQ		5
-#define DWC3_RXREQQ		7
-#define DWC3_RXINFOQ		9
-#define DWC3_DESCFETCHQ		13
-#define DWC3_EVENTQ		15
+#define DWC3_TXFIFOQ		0
+#define DWC3_RXFIFOQ		1
+#define DWC3_TXREQQ		2
+#define DWC3_RXREQQ		3
+#define DWC3_RXINFOQ		4
+#define DWC3_PSTATQ		5
+#define DWC3_DESCFETCHQ		6
+#define DWC3_EVENTQ		7
+#define DWC3_AUXEVENTQ		8
 
 /* Global RX Threshold Configuration Register */
 #define DWC3_GRXTHRCFG_MAXRXBURSTSIZE(n) (((n) & 0x1f) << 19)
@@ -795,7 +797,9 @@ struct dwc3_scratchpad_array {
  * @usb3_phy: pointer to USB3 PHY
  * @usb2_generic_phy: pointer to USB2 PHY
  * @usb3_generic_phy: pointer to USB3 PHY
+ * @phys_ready: flag to indicate that PHYs are ready
  * @ulpi: pointer to ulpi interface
+ * @ulpi_ready: flag to indicate that ULPI is initialized
  * @u2sel: parameter from Set SEL request.
  * @u2pel: parameter from Set SEL request.
  * @u1sel: parameter from Set SEL request.
@@ -893,7 +897,10 @@ struct dwc3 {
 	struct phy		*usb2_generic_phy;
 	struct phy		*usb3_generic_phy;
 
+	bool			phys_ready;
+
 	struct ulpi		*ulpi;
+	bool			ulpi_ready;
 
 	void __iomem		*regs;
 	size_t			regs_size;

drivers/usb/dwc3/dwc3-of-simple.c

@@ -143,6 +143,7 @@ static int dwc3_of_simple_remove(struct platform_device *pdev)
 		clk_disable_unprepare(simple->clks[i]);
 		clk_put(simple->clks[i]);
 	}
+	simple->num_clocks = 0;
 
 	reset_control_assert(simple->resets);
 	reset_control_put(simple->resets);

drivers/usb/dwc3/dwc3-omap.c

@@ -582,9 +582,25 @@ static int dwc3_omap_resume(struct device *dev)
 	return 0;
 }
 
+static void dwc3_omap_complete(struct device *dev)
+{
+	struct dwc3_omap	*omap = dev_get_drvdata(dev);
+
+	if (extcon_get_state(omap->edev, EXTCON_USB))
+		dwc3_omap_set_mailbox(omap, OMAP_DWC3_VBUS_VALID);
+	else
+		dwc3_omap_set_mailbox(omap, OMAP_DWC3_VBUS_OFF);
+
+	if (extcon_get_state(omap->edev, EXTCON_USB_HOST))
+		dwc3_omap_set_mailbox(omap, OMAP_DWC3_ID_GROUND);
+	else
+		dwc3_omap_set_mailbox(omap, OMAP_DWC3_ID_FLOAT);
+}
+
 static const struct dev_pm_ops dwc3_omap_dev_pm_ops = {
 
 	SET_SYSTEM_SLEEP_PM_OPS(dwc3_omap_suspend, dwc3_omap_resume)
+	.complete = dwc3_omap_complete,
 };
 
 #define DEV_PM_OPS	(&dwc3_omap_dev_pm_ops)

drivers/usb/dwc3/ep0.c

@@ -854,7 +854,12 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
 		trb++;
 		trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
 		trace_dwc3_complete_trb(ep0, trb);
-		ep0->trb_enqueue = 0;
+
+		if (r->direction)
+			dwc->eps[1]->trb_enqueue = 0;
+		else
+			dwc->eps[0]->trb_enqueue = 0;
+
 		dwc->ep0_bounced = false;
 	}
 

drivers/usb/dwc3/gadget.c

@@ -2745,6 +2745,8 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
 		break;
 	}
 
+	dwc->eps[1]->endpoint.maxpacket = dwc->gadget.ep0->maxpacket;
+
 	/* Enable USB2 LPM Capability */
 
 	if ((dwc->revision > DWC3_REVISION_194A) &&

drivers/usb/gadget/function/f_fs.c

@@ -1855,44 +1855,20 @@ static int ffs_func_eps_enable(struct ffs_function *func)
 
 	spin_lock_irqsave(&func->ffs->eps_lock, flags);
 	while(count--) {
-		struct usb_endpoint_descriptor *ds;
-		struct usb_ss_ep_comp_descriptor *comp_desc = NULL;
-		int needs_comp_desc = false;
-		int desc_idx;
-
-		if (ffs->gadget->speed == USB_SPEED_SUPER) {
-			desc_idx = 2;
-			needs_comp_desc = true;
-		} else if (ffs->gadget->speed == USB_SPEED_HIGH)
-			desc_idx = 1;
-		else
-			desc_idx = 0;
-
-		/* fall-back to lower speed if desc missing for current speed */
-		do {
-			ds = ep->descs[desc_idx];
-		} while (!ds && --desc_idx >= 0);
-
-		if (!ds) {
-			ret = -EINVAL;
-			break;
-		}
-
 		ep->ep->driver_data = ep;
-		ep->ep->desc = ds;
 
-		if (needs_comp_desc) {
-			comp_desc = (struct usb_ss_ep_comp_descriptor *)(ds +
-					USB_DT_ENDPOINT_SIZE);
-			ep->ep->maxburst = comp_desc->bMaxBurst + 1;
-			ep->ep->comp_desc = comp_desc;
+		ret = config_ep_by_speed(func->gadget, &func->function, ep->ep);
+		if (ret) {
+			pr_err("%s: config_ep_by_speed(%s) returned %d\n",
+					__func__, ep->ep->name, ret);
+			break;
 		}
 
 		ret = usb_ep_enable(ep->ep);
 		if (likely(!ret)) {
 			epfile->ep = ep;
-			epfile->in = usb_endpoint_dir_in(ds);
-			epfile->isoc = usb_endpoint_xfer_isoc(ds);
+			epfile->in = usb_endpoint_dir_in(ep->ep->desc);
+			epfile->isoc = usb_endpoint_xfer_isoc(ep->ep->desc);
 		} else {
 			break;
 		}
@@ -2979,10 +2955,8 @@ static int _ffs_func_bind(struct usb_configuration *c,
 	struct ffs_data *ffs = func->ffs;
 
 	const int full = !!func->ffs->fs_descs_count;
-	const int high = gadget_is_dualspeed(func->gadget) &&
-		func->ffs->hs_descs_count;
-	const int super = gadget_is_superspeed(func->gadget) &&
-		func->ffs->ss_descs_count;
+	const int high = !!func->ffs->hs_descs_count;
+	const int super = !!func->ffs->ss_descs_count;
 
 	int fs_len, hs_len, ss_len, ret, i;
 	struct ffs_ep *eps_ptr;

drivers/usb/gadget/function/f_uac2.c

@@ -524,6 +524,8 @@ afunc_bind(struct usb_configuration *cfg, struct usb_function *fn)
 		dev_err(dev, "%s:%d Error!\n", __func__, __LINE__);
 		return ret;
 	}
+	iad_desc.bFirstInterface = ret;
+
 	std_ac_if_desc.bInterfaceNumber = ret;
 	uac2->ac_intf = ret;
 	uac2->ac_alt = 0;

drivers/usb/gadget/udc/Kconfig

@@ -274,7 +274,6 @@ config USB_SNP_UDC_PLAT
 	tristate "Synopsys USB 2.0 Device controller"
 	depends on USB_GADGET && OF && HAS_DMA
 	depends on EXTCON || EXTCON=n
-	select USB_GADGET_DUALSPEED
 	select USB_SNP_CORE
 	default ARCH_BCM_IPROC
 	help

drivers/usb/gadget/udc/bdc/bdc_pci.c

@@ -77,6 +77,7 @@ static int bdc_pci_probe(struct pci_dev *pci, const struct pci_device_id *id)
 	if (ret) {
 		dev_err(&pci->dev,
 			"couldn't add resources to bdc device\n");
+		platform_device_put(bdc);
 		return ret;
 	}
 

drivers/usb/gadget/udc/core.c

@@ -180,8 +180,8 @@ EXPORT_SYMBOL_GPL(usb_ep_alloc_request);
 void usb_ep_free_request(struct usb_ep *ep,
 				       struct usb_request *req)
 {
-	ep->ops->free_request(ep, req);
 	trace_usb_ep_free_request(ep, req, 0);
+	ep->ops->free_request(ep, req);
 }
 EXPORT_SYMBOL_GPL(usb_ep_free_request);
 

drivers/usb/gadget/udc/fsl_udc_core.c

@@ -1305,7 +1305,7 @@ static void udc_reset_ep_queue(struct fsl_udc *udc, u8 pipe)
 {
 	struct fsl_ep *ep = get_ep_by_pipe(udc, pipe);
 
-	if (ep->name)
+	if (ep->ep.name)
 		nuke(ep, -ESHUTDOWN);
 }
 
@@ -1693,7 +1693,7 @@ static void dtd_complete_irq(struct fsl_udc *udc)
 		curr_ep = get_ep_by_pipe(udc, i);
 
 		/* If the ep is configured */
-		if (curr_ep->name == NULL) {
+		if (!curr_ep->ep.name) {
 			WARNING("Invalid EP?");
 			continue;
 		}

drivers/usb/gadget/udc/renesas_usb3.c

@@ -2410,7 +2410,7 @@ static int renesas_usb3_remove(struct platform_device *pdev)
 	__renesas_usb3_ep_free_request(usb3->ep0_req);
 	if (usb3->phy)
 		phy_put(usb3->phy);
-	pm_runtime_disable(usb3_to_dev(usb3));
+	pm_runtime_disable(&pdev->dev);
 
 	return 0;
 }

drivers/usb/phy/phy-mxs-usb.c

@@ -602,6 +602,9 @@ static enum usb_charger_type mxs_phy_charger_detect(struct usb_phy *phy)
 	void __iomem *base = phy->io_priv;
 	enum usb_charger_type chgr_type = UNKNOWN_TYPE;
 
+	if (!regmap)
+		return UNKNOWN_TYPE;
+
 	if (mxs_charger_data_contact_detect(mxs_phy))
 		return chgr_type;