Commit fc9655e6 authored by Eugeniy Paltsev's avatar Eugeniy Paltsev Committed by Philipp Zabel

ARC: reset: add missing DT binding documentation for HSDKv1 reset driver

When applying the original patch [1], the DT binding docs were lost.
This patch adds them back.

[1] https://patchwork.kernel.org/patch/9852997/

Fixes: e0be864f ("ARC: reset: introduce HSDKv1 reset driver")
Signed-off-by: default avatarEugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: default avatarPhilipp Zabel <p.zabel@pengutronix.de>
parent 2d48a237
Binding for the HSDK v1 reset controller
This binding uses the common reset binding[1].
[1] Documentation/devicetree/bindings/reset/reset.txt
Required properties:
- compatible: should be "snps,hsdk-v1.0-reset".
- reg: should always contain 2 pairs address - length: first for reset
configuration register and second for corresponding SW reset and status bits
register.
- #reset-cells: from common reset binding; Should always be set to 1.
Example:
reset: reset@880 {
compatible = "snps,hsdk-v1.0-reset";
#reset-cells = <1>;
reg = <0x8A0 0x4>, <0xFF0 0x4>;
};
Specifying reset lines connected to IP modules:
ethernet@.... {
....
resets = <&reset HSDK_V1_ETH_RESET>;
....
};
The index could be found in <dt-bindings/reset/snps,hsdk-v1-reset.h>
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment