Merge branch 'for-upstream' of...

Merge branch 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next

Johan Hedberg says:

====================
pull request: bluetooth-next 2019-09-06

Here's the main bluetooth-next pull request for the 5.4 kernel.

 - Cleanups & fixes to btrtl driver
 - Fixes for Realtek devices in btusb, e.g. for suspend handling
 - Firmware loading support for BCM4345C5
 - hidp_send_message() return value handling fixes
 - Added support for utilizing Fast Advertising Interval
 - Various other minor cleanups & fixes

Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/net/broadcom-bluetooth.txt

@@ -13,6 +13,7 @@ Required properties:
    * "brcm,bcm20702a1"
    * "brcm,bcm4330-bt"
    * "brcm,bcm43438-bt"
+   * "brcm,bcm4345c5"
 
 Optional properties:
 

drivers/bluetooth/btbcm.c

@@ -23,6 +23,7 @@
 #define BDADDR_BCM43430A0 (&(bdaddr_t) {{0xac, 0x1f, 0x12, 0xa0, 0x43, 0x43}})
 #define BDADDR_BCM4324B3 (&(bdaddr_t) {{0x00, 0x00, 0x00, 0xb3, 0x24, 0x43}})
 #define BDADDR_BCM4330B1 (&(bdaddr_t) {{0x00, 0x00, 0x00, 0xb1, 0x30, 0x43}})
+#define BDADDR_BCM4345C5 (&(bdaddr_t) {{0xac, 0x1f, 0x00, 0xc5, 0x45, 0x43}})
 #define BDADDR_BCM43341B (&(bdaddr_t) {{0xac, 0x1f, 0x00, 0x1b, 0x34, 0x43}})
 
 int btbcm_check_bdaddr(struct hci_dev *hdev)
@@ -73,6 +74,7 @@ int btbcm_check_bdaddr(struct hci_dev *hdev)
 	    !bacmp(&bda->bdaddr, BDADDR_BCM2076B1) ||
 	    !bacmp(&bda->bdaddr, BDADDR_BCM4324B3) ||
 	    !bacmp(&bda->bdaddr, BDADDR_BCM4330B1) ||
+	    !bacmp(&bda->bdaddr, BDADDR_BCM4345C5) ||
 	    !bacmp(&bda->bdaddr, BDADDR_BCM43430A0) ||
 	    !bacmp(&bda->bdaddr, BDADDR_BCM43341B)) {
 		bt_dev_info(hdev, "BCM: Using default device address (%pMR)",
@@ -332,6 +334,7 @@ static const struct bcm_subver_table bcm_uart_subver_table[] = {
 	{ 0x2122, "BCM4343A0"	},	/* 001.001.034 */
 	{ 0x2209, "BCM43430A1"  },	/* 001.002.009 */
 	{ 0x6119, "BCM4345C0"	},	/* 003.001.025 */
+	{ 0x6606, "BCM4345C5"	},	/* 003.006.006 */
 	{ 0x230f, "BCM4356A2"	},	/* 001.003.015 */
 	{ 0x220e, "BCM20702A1"  },	/* 001.002.014 */
 	{ 0x4217, "BCM4329B1"   },	/* 002.002.023 */

drivers/bluetooth/btqca.c

@@ -106,8 +106,9 @@ int qca_send_pre_shutdown_cmd(struct hci_dev *hdev)
 
 	bt_dev_dbg(hdev, "QCA pre shutdown cmd");
 
-	skb = __hci_cmd_sync(hdev, QCA_PRE_SHUTDOWN_CMD, 0,
-				NULL, HCI_INIT_TIMEOUT);
+	skb = __hci_cmd_sync_ev(hdev, QCA_PRE_SHUTDOWN_CMD, 0,
+				NULL, HCI_EV_CMD_COMPLETE, HCI_INIT_TIMEOUT);
+
 	if (IS_ERR(skb)) {
 		err = PTR_ERR(skb);
 		bt_dev_err(hdev, "QCA preshutdown_cmd failed (%d)", err);

drivers/bluetooth/btusb.c

@@ -435,6 +435,7 @@ static const struct dmi_system_id btusb_needs_reset_resume_table[] = {
 #define BTUSB_OOB_WAKE_ENABLED	11
 #define BTUSB_HW_RESET_ACTIVE	12
 #define BTUSB_TX_WAIT_VND_EVT	13
+#define BTUSB_WAKEUP_DISABLE	14
 
 struct btusb_data {
 	struct hci_dev       *hdev;
@@ -523,6 +524,36 @@ static void btusb_intel_cmd_timeout(struct hci_dev *hdev)
 	gpiod_set_value_cansleep(reset_gpio, 0);
 }
 
+static void btusb_rtl_cmd_timeout(struct hci_dev *hdev)
+{
+	struct btusb_data *data = hci_get_drvdata(hdev);
+	struct gpio_desc *reset_gpio = data->reset_gpio;
+
+	if (++data->cmd_timeout_cnt < 5)
+		return;
+
+	if (!reset_gpio) {
+		bt_dev_err(hdev, "No gpio to reset Realtek device, ignoring");
+		return;
+	}
+
+	/* Toggle the hard reset line. The Realtek device is going to
+	 * yank itself off the USB and then replug. The cleanup is handled
+	 * correctly on the way out (standard USB disconnect), and the new
+	 * device is detected cleanly and bound to the driver again like
+	 * it should be.
+	 */
+	if (test_and_set_bit(BTUSB_HW_RESET_ACTIVE, &data->flags)) {
+		bt_dev_err(hdev, "last reset failed? Not resetting again");
+		return;
+	}
+
+	bt_dev_err(hdev, "Reset Realtek device via gpio");
+	gpiod_set_value_cansleep(reset_gpio, 0);
+	msleep(200);
+	gpiod_set_value_cansleep(reset_gpio, 1);
+}
+
 static inline void btusb_free_frags(struct btusb_data *data)
 {
 	unsigned long flags;
@@ -1175,6 +1206,13 @@ static int btusb_open(struct hci_dev *hdev)
 	 */
 	device_wakeup_enable(&data->udev->dev);
 
+	/* Disable device remote wakeup when host is suspended
+	 * For Realtek chips, global suspend without
+	 * SET_FEATURE (DEVICE_REMOTE_WAKEUP) can save more power in device.
+	 */
+	if (test_bit(BTUSB_WAKEUP_DISABLE, &data->flags))
+		device_wakeup_disable(&data->udev->dev);
+
 	if (test_and_set_bit(BTUSB_INTR_RUNNING, &data->flags))
 		goto done;
 
@@ -1238,6 +1276,11 @@ static int btusb_close(struct hci_dev *hdev)
 		goto failed;
 
 	data->intf->needs_remote_wakeup = 0;
+
+	/* Enable remote wake up for auto-suspend */
+	if (test_bit(BTUSB_WAKEUP_DISABLE, &data->flags))
+		data->intf->needs_remote_wakeup = 1;
+
 	device_wakeup_disable(&data->udev->dev);
 	usb_autopm_put_interface(data->intf);
 
@@ -3770,12 +3813,13 @@ static int btusb_probe(struct usb_interface *intf,
 	if (id->driver_info & BTUSB_REALTEK) {
 		hdev->setup = btrtl_setup_realtek;
 		hdev->shutdown = btrtl_shutdown_realtek;
+		hdev->cmd_timeout = btusb_rtl_cmd_timeout;
 
-		/* Realtek devices lose their updated firmware over suspend,
-		 * but the USB hub doesn't notice any status change.
-		 * Explicitly request a device reset on resume.
+		/* Realtek devices lose their updated firmware over global
+		 * suspend that means host doesn't send SET_FEATURE
+		 * (DEVICE_REMOTE_WAKEUP)
 		 */
-		interface_to_usbdev(intf)->quirks |= USB_QUIRK_RESET_RESUME;
+		set_bit(BTUSB_WAKEUP_DISABLE, &data->flags);
 	}
 #endif
 
@@ -3949,6 +3993,19 @@ static int btusb_suspend(struct usb_interface *intf, pm_message_t message)
 		enable_irq(data->oob_wake_irq);
 	}
 
+	/* For global suspend, Realtek devices lose the loaded fw
+	 * in them. But for autosuspend, firmware should remain.
+	 * Actually, it depends on whether the usb host sends
+	 * set feature (enable wakeup) or not.
+	 */
+	if (test_bit(BTUSB_WAKEUP_DISABLE, &data->flags)) {
+		if (PMSG_IS_AUTO(message) &&
+		    device_can_wakeup(&data->udev->dev))
+			data->udev->do_remote_wakeup = 1;
+		else if (!PMSG_IS_AUTO(message))
+			data->udev->reset_resume = 1;
+	}
+
 	return 0;
 }
 

drivers/bluetooth/hci_bcm.c

@@ -260,7 +260,7 @@ static int bcm_gpio_set_power(struct bcm_device *dev, bool powered)
 	}
 
 	/* wait for device to power on and come out of reset */
-	usleep_range(10000, 20000);
+	usleep_range(100000, 120000);
 
 	dev->res_enabled = powered;
 
@@ -824,6 +824,21 @@ static int bcm_resume(struct device *dev)
 }
 #endif
 
+/* Some firmware reports an IRQ which does not work (wrong pin in fw table?) */
+static const struct dmi_system_id bcm_broken_irq_dmi_table[] = {
+	{
+		.ident = "Meegopad T08",
+		.matches = {
+			DMI_EXACT_MATCH(DMI_BOARD_VENDOR,
+					"To be filled by OEM."),
+			DMI_EXACT_MATCH(DMI_BOARD_NAME, "T3 MRD"),
+			DMI_EXACT_MATCH(DMI_BOARD_VERSION, "V1.1"),
+		},
+	},
+	{ }
+};
+
+#ifdef CONFIG_ACPI
 static const struct acpi_gpio_params first_gpio = { 0, 0, false };
 static const struct acpi_gpio_params second_gpio = { 1, 0, false };
 static const struct acpi_gpio_params third_gpio = { 2, 0, false };
@@ -842,21 +857,6 @@ static const struct acpi_gpio_mapping acpi_bcm_int_first_gpios[] = {
 	{ },
 };
 
-/* Some firmware reports an IRQ which does not work (wrong pin in fw table?) */
-static const struct dmi_system_id bcm_broken_irq_dmi_table[] = {
-	{
-		.ident = "Meegopad T08",
-		.matches = {
-			DMI_EXACT_MATCH(DMI_BOARD_VENDOR,
-					"To be filled by OEM."),
-			DMI_EXACT_MATCH(DMI_BOARD_NAME, "T3 MRD"),
-			DMI_EXACT_MATCH(DMI_BOARD_VERSION, "V1.1"),
-		},
-	},
-	{ }
-};
-
-#ifdef CONFIG_ACPI
 static int bcm_resource(struct acpi_resource *ares, void *data)
 {
 	struct bcm_device *dev = data;
@@ -1419,6 +1419,7 @@ static void bcm_serdev_remove(struct serdev_device *serdev)
 #ifdef CONFIG_OF
 static const struct of_device_id bcm_bluetooth_of_match[] = {
 	{ .compatible = "brcm,bcm20702a1" },
+	{ .compatible = "brcm,bcm4345c5" },
 	{ .compatible = "brcm,bcm4330-bt" },
 	{ .compatible = "brcm,bcm43438-bt" },
 	{ },

drivers/bluetooth/hci_qca.c

@@ -502,26 +502,7 @@ static int qca_open(struct hci_uart *hu)
 	qca->tx_ibs_state = HCI_IBS_TX_ASLEEP;
 	qca->rx_ibs_state = HCI_IBS_RX_ASLEEP;
 
-	/* clocks actually on, but we start votes off */
-	qca->tx_vote = false;
-	qca->rx_vote = false;
-	qca->flags = 0;
-
-	qca->ibs_sent_wacks = 0;
-	qca->ibs_sent_slps = 0;
-	qca->ibs_sent_wakes = 0;
-	qca->ibs_recv_wacks = 0;
-	qca->ibs_recv_slps = 0;
-	qca->ibs_recv_wakes = 0;
 	qca->vote_last_jif = jiffies;
-	qca->vote_on_ms = 0;
-	qca->vote_off_ms = 0;
-	qca->votes_on = 0;
-	qca->votes_off = 0;
-	qca->tx_votes_on = 0;
-	qca->tx_votes_off = 0;
-	qca->rx_votes_on = 0;
-	qca->rx_votes_off = 0;
 
 	hu->priv = qca;
 
@@ -1261,6 +1242,11 @@ static int qca_setup(struct hci_uart *hu)
 	/* Patch downloading has to be done without IBS mode */
 	clear_bit(QCA_IBS_ENABLED, &qca->flags);
 
+	/* Enable controller to do both LE scan and BR/EDR inquiry
+	 * simultaneously.
+	 */
+	set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
+
 	if (qca_is_wcn399x(soc_type)) {
 		bt_dev_info(hdev, "setting up wcn3990");
 
@@ -1326,7 +1312,7 @@ static int qca_setup(struct hci_uart *hu)
 	return ret;
 }
 
-static struct hci_uart_proto qca_proto = {
+static const struct hci_uart_proto qca_proto = {
 	.id		= HCI_UART_QCA,
 	.name		= "QCA",
 	.manufacturer	= 29,
@@ -1389,6 +1375,8 @@ static int qca_power_off(struct hci_dev *hdev)
 	/* Perform pre shutdown command */
 	qca_send_pre_shutdown_cmd(hdev);
 
+	usleep_range(8000, 10000);
+
 	qca_power_shutdown(hu);
 	return 0;
 }

drivers/hid/hid-microsoft.c

@@ -303,7 +303,7 @@ static void ms_ff_worker(struct work_struct *work)
 	r->magnitude[MAGNITUDE_WEAK] = ms->weak;     /* right actuator */
 
 	ret = hid_hw_output_report(hdev, (__u8 *)r, sizeof(*r));
-	if (ret)
+	if (ret < 0)
 		hid_warn(hdev, "failed to send FF report\n");
 }
 

include/net/bluetooth/hci_core.h

@@ -1517,6 +1517,8 @@ void hci_mgmt_chan_unregister(struct hci_mgmt_chan *c);
 #define DISCOV_INTERLEAVED_INQUIRY_LEN	0x04
 #define DISCOV_BREDR_INQUIRY_LEN	0x08
 #define DISCOV_LE_RESTART_DELAY		msecs_to_jiffies(200)	/* msec */
+#define DISCOV_LE_FAST_ADV_INT_MIN     100     /* msec */
+#define DISCOV_LE_FAST_ADV_INT_MAX     150     /* msec */
 
 void mgmt_fill_version_info(void *ver);
 int mgmt_new_settings(struct hci_dev *hdev);

net/bluetooth/6lowpan.c

@@ -583,7 +583,7 @@ static const struct net_device_ops netdev_ops = {
 	.ndo_start_xmit		= bt_xmit,
 };
 
-static struct header_ops header_ops = {
+static const struct header_ops header_ops = {
 	.create	= header_create,
 };
 

net/bluetooth/hci_request.c

@@ -1054,6 +1054,7 @@ void __hci_req_enable_advertising(struct hci_request *req)
 	struct hci_cp_le_set_adv_param cp;
 	u8 own_addr_type, enable = 0x01;
 	bool connectable;
+	u16 adv_min_interval, adv_max_interval;
 	u32 flags;
 
 	flags = get_adv_instance_flags(hdev, hdev->cur_adv_instance);
@@ -1087,16 +1088,30 @@ void __hci_req_enable_advertising(struct hci_request *req)
 		return;
 
 	memset(&cp, 0, sizeof(cp));
-	cp.min_interval = cpu_to_le16(hdev->le_adv_min_interval);
-	cp.max_interval = cpu_to_le16(hdev->le_adv_max_interval);
 
-	if (connectable)
+	if (connectable) {
 		cp.type = LE_ADV_IND;
-	else if (get_cur_adv_instance_scan_rsp_len(hdev))
+
+		adv_min_interval = hdev->le_adv_min_interval;
+		adv_max_interval = hdev->le_adv_max_interval;
+	} else {
+		if (get_cur_adv_instance_scan_rsp_len(hdev))
 			cp.type = LE_ADV_SCAN_IND;
 		else
 			cp.type = LE_ADV_NONCONN_IND;
 
+		if (!hci_dev_test_flag(hdev, HCI_DISCOVERABLE) ||
+		    hci_dev_test_flag(hdev, HCI_LIMITED_DISCOVERABLE)) {
+			adv_min_interval = DISCOV_LE_FAST_ADV_INT_MIN;
+			adv_max_interval = DISCOV_LE_FAST_ADV_INT_MAX;
+		} else {
+			adv_min_interval = hdev->le_adv_min_interval;
+			adv_max_interval = hdev->le_adv_max_interval;
+		}
+	}
+
+	cp.min_interval = cpu_to_le16(adv_min_interval);
+	cp.max_interval = cpu_to_le16(adv_max_interval);
 	cp.own_address_type = own_addr_type;
 	cp.channel_map = hdev->le_adv_channel_map;
 

net/bluetooth/hidp/core.c

@@ -267,7 +267,7 @@ static int hidp_get_raw_report(struct hid_device *hid,
 	set_bit(HIDP_WAITING_FOR_RETURN, &session->flags);
 	data[0] = report_number;
 	ret = hidp_send_ctrl_message(session, report_type, data, 1);
-	if (ret)
+	if (ret < 0)
 		goto err;
 
 	/* Wait for the return of the report. The returned report
@@ -343,7 +343,7 @@ static int hidp_set_raw_report(struct hid_device *hid, unsigned char reportnum,
 	data[0] = reportnum;
 	set_bit(HIDP_WAITING_FOR_SEND_ACK, &session->flags);
 	ret = hidp_send_ctrl_message(session, report_type, data, count);
-	if (ret)
+	if (ret < 0)
 		goto err;
 
 	/* Wait for the ACK from the device. */

net/bluetooth/mgmt.c

@@ -2588,7 +2588,6 @@ static int get_connections(struct sock *sk, struct hci_dev *hdev, void *data,
 {
 	struct mgmt_rp_get_connections *rp;
 	struct hci_conn *c;
-	size_t rp_len;
 	int err;
 	u16 i;
 
@@ -2608,8 +2607,7 @@ static int get_connections(struct sock *sk, struct hci_dev *hdev, void *data,
 			i++;
 	}
 
-	rp_len = sizeof(*rp) + (i * sizeof(struct mgmt_addr_info));
-	rp = kmalloc(rp_len, GFP_KERNEL);
+	rp = kmalloc(struct_size(rp, addr, i), GFP_KERNEL);
 	if (!rp) {
 		err = -ENOMEM;
 		goto unlock;
@@ -2629,10 +2627,8 @@ static int get_connections(struct sock *sk, struct hci_dev *hdev, void *data,
 	rp->conn_count = cpu_to_le16(i);
 
 	/* Recalculate length in case of filtered SCO connections, etc */
-	rp_len = sizeof(*rp) + (i * sizeof(struct mgmt_addr_info));
-
 	err = mgmt_cmd_complete(sk, hdev->id, MGMT_OP_GET_CONNECTIONS, 0, rp,
-				rp_len);
+				struct_size(rp, addr, i));
 
 	kfree(rp);