Merge tag 'for-5.17-clk' of...

Merge tag 'for-5.17-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into clk-nvidia

Pull Tegra clk driver updates from Thierry Reding:

This contains a simple fix for the VDE clock on Tegra114 and some
preparation work to support runtime PM and generic power domains.

* tag 'for-5.17-clk' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  clk: tegra: Support runtime PM and power domain
  clk: tegra: Make vde a child of pll_p on tegra114

drivers/clk/tegra/Makefile

 # SPDX-License-Identifier: GPL-2.0
 obj-y					+= clk.o
 obj-y					+= clk-audio-sync.o
+obj-y					+= clk-device.o
 obj-y					+= clk-dfll.o
 obj-y					+= clk-divider.o
 obj-y					+= clk-periph.o

drivers/clk/tegra/clk-device.c

+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/mutex.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_opp.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+
+#include <soc/tegra/common.h>
+
+#include "clk.h"
+
+/*
+ * This driver manages performance state of the core power domain for the
+ * independent PLLs and system clocks.  We created a virtual clock device
+ * for such clocks, see tegra_clk_dev_register().
+ */
+
+struct tegra_clk_device {
+	struct notifier_block clk_nb;
+	struct device *dev;
+	struct clk_hw *hw;
+	struct mutex lock;
+};
+
+static int tegra_clock_set_pd_state(struct tegra_clk_device *clk_dev,
+				    unsigned long rate)
+{
+	struct device *dev = clk_dev->dev;
+	struct dev_pm_opp *opp;
+	unsigned int pstate;
+
+	opp = dev_pm_opp_find_freq_ceil(dev, &rate);
+	if (opp == ERR_PTR(-ERANGE)) {
+		/*
+		 * Some clocks may be unused by a particular board and they
+		 * may have uninitiated clock rate that is overly high.  In
+		 * this case clock is expected to be disabled, but still we
+		 * need to set up performance state of the power domain and
+		 * not error out clk initialization.  A typical example is
+		 * a PCIe clock on Android tablets.
+		 */
+		dev_dbg(dev, "failed to find ceil OPP for %luHz\n", rate);
+		opp = dev_pm_opp_find_freq_floor(dev, &rate);
+	}
+
+	if (IS_ERR(opp)) {
+		dev_err(dev, "failed to find OPP for %luHz: %pe\n", rate, opp);
+		return PTR_ERR(opp);
+	}
+
+	pstate = dev_pm_opp_get_required_pstate(opp, 0);
+	dev_pm_opp_put(opp);
+
+	return dev_pm_genpd_set_performance_state(dev, pstate);
+}
+
+static int tegra_clock_change_notify(struct notifier_block *nb,
+				     unsigned long msg, void *data)
+{
+	struct clk_notifier_data *cnd = data;
+	struct tegra_clk_device *clk_dev;
+	int err = 0;
+
+	clk_dev = container_of(nb, struct tegra_clk_device, clk_nb);
+
+	mutex_lock(&clk_dev->lock);
+	switch (msg) {
+	case PRE_RATE_CHANGE:
+		if (cnd->new_rate > cnd->old_rate)
+			err = tegra_clock_set_pd_state(clk_dev, cnd->new_rate);
+		break;
+
+	case ABORT_RATE_CHANGE:
+		err = tegra_clock_set_pd_state(clk_dev, cnd->old_rate);
+		break;
+
+	case POST_RATE_CHANGE:
+		if (cnd->new_rate < cnd->old_rate)
+			err = tegra_clock_set_pd_state(clk_dev, cnd->new_rate);
+		break;
+
+	default:
+		break;
+	}
+	mutex_unlock(&clk_dev->lock);
+
+	return notifier_from_errno(err);
+}
+
+static int tegra_clock_sync_pd_state(struct tegra_clk_device *clk_dev)
+{
+	unsigned long rate;
+	int ret;
+
+	mutex_lock(&clk_dev->lock);
+
+	rate = clk_hw_get_rate(clk_dev->hw);
+	ret = tegra_clock_set_pd_state(clk_dev, rate);
+
+	mutex_unlock(&clk_dev->lock);
+
+	return ret;
+}
+
+static int tegra_clock_probe(struct platform_device *pdev)
+{
+	struct tegra_core_opp_params opp_params = {};
+	struct tegra_clk_device *clk_dev;
+	struct device *dev = &pdev->dev;
+	struct clk *clk;
+	int err;
+
+	if (!dev->pm_domain)
+		return -EINVAL;
+
+	clk_dev = devm_kzalloc(dev, sizeof(*clk_dev), GFP_KERNEL);
+	if (!clk_dev)
+		return -ENOMEM;
+
+	clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	clk_dev->dev = dev;
+	clk_dev->hw = __clk_get_hw(clk);
+	clk_dev->clk_nb.notifier_call = tegra_clock_change_notify;
+	mutex_init(&clk_dev->lock);
+
+	platform_set_drvdata(pdev, clk_dev);
+
+	/*
+	 * Runtime PM was already enabled for this device by the parent clk
+	 * driver and power domain state should be synced under clk_dev lock,
+	 * hence we don't use the common OPP helper that initializes OPP
+	 * state. For some clocks common OPP helper may fail to find ceil
+	 * rate, it's handled by this driver.
+	 */
+	err = devm_tegra_core_dev_init_opp_table(dev, &opp_params);
+	if (err)
+		return err;
+
+	err = clk_notifier_register(clk, &clk_dev->clk_nb);
+	if (err) {
+		dev_err(dev, "failed to register clk notifier: %d\n", err);
+		return err;
+	}
+
+	/*
+	 * The driver is attaching to a potentially active/resumed clock, hence
+	 * we need to sync the power domain performance state in a accordance to
+	 * the clock rate if clock is resumed.
+	 */
+	err = tegra_clock_sync_pd_state(clk_dev);
+	if (err)
+		goto unreg_clk;
+
+	return 0;
+
+unreg_clk:
+	clk_notifier_unregister(clk, &clk_dev->clk_nb);
+
+	return err;
+}
+
+/*
+ * Tegra GENPD driver enables clocks during NOIRQ phase. It can't be done
+ * for clocks served by this driver because runtime PM is unavailable in
+ * NOIRQ phase. We will keep clocks resumed during suspend to mitigate this
+ * problem. In practice this makes no difference from a power management
+ * perspective since voltage is kept at a nominal level during suspend anyways.
+ */
+static const struct dev_pm_ops tegra_clock_pm = {
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_resume_and_get, pm_runtime_put)
+};
+
+static const struct of_device_id tegra_clock_match[] = {
+	{ .compatible = "nvidia,tegra20-sclk" },
+	{ .compatible = "nvidia,tegra30-sclk" },
+	{ .compatible = "nvidia,tegra30-pllc" },
+	{ .compatible = "nvidia,tegra30-plle" },
+	{ .compatible = "nvidia,tegra30-pllm" },
+	{ }
+};
+
+static struct platform_driver tegra_clock_driver = {
+	.driver = {
+		.name = "tegra-clock",
+		.of_match_table = tegra_clock_match,
+		.pm = &tegra_clock_pm,
+		.suppress_bind_attrs = true,
+	},
+	.probe = tegra_clock_probe,
+};
+builtin_platform_driver(tegra_clock_driver);

drivers/clk/tegra/clk-pll.c

@@ -1914,7 +1914,7 @@ static struct clk *_tegra_clk_register_pll(struct tegra_clk_pll *pll,
 	/* Data in .init is copied by clk_register(), so stack variable OK */
 	pll->hw.init = &init;
 
-	return clk_register(NULL, &pll->hw);
+	return tegra_clk_dev_register(&pll->hw);
 }
 
 struct clk *tegra_clk_register_pll(const char *name, const char *parent_name,

drivers/clk/tegra/clk-super.c

@@ -226,7 +226,7 @@ struct clk *tegra_clk_register_super_mux(const char *name,
 	/* Data in .init is copied by clk_register(), so stack variable OK */
 	super->hw.init = &init;
 
-	clk = clk_register(NULL, &super->hw);
+	clk = tegra_clk_dev_register(&super->hw);
 	if (IS_ERR(clk))
 		kfree(super);
 

drivers/clk/tegra/clk-tegra114.c

@@ -1158,7 +1158,7 @@ static struct tegra_clk_init_table init_table[] __initdata = {
 	{ TEGRA114_CLK_XUSB_HS_SRC, TEGRA114_CLK_XUSB_SS_DIV2, 61200000, 0 },
 	{ TEGRA114_CLK_XUSB_FALCON_SRC, TEGRA114_CLK_PLL_P, 204000000, 0 },
 	{ TEGRA114_CLK_XUSB_HOST_SRC, TEGRA114_CLK_PLL_P, 102000000, 0 },
-	{ TEGRA114_CLK_VDE, TEGRA114_CLK_CLK_MAX, 600000000, 0 },
+	{ TEGRA114_CLK_VDE, TEGRA114_CLK_PLL_P, 408000000, 0 },
 	{ TEGRA114_CLK_SPDIF_IN_SYNC, TEGRA114_CLK_CLK_MAX, 24000000, 0 },
 	{ TEGRA114_CLK_I2S0_SYNC, TEGRA114_CLK_CLK_MAX, 24000000, 0 },
 	{ TEGRA114_CLK_I2S1_SYNC, TEGRA114_CLK_CLK_MAX, 24000000, 0 },

drivers/clk/tegra/clk-tegra20.c

@@ -6,8 +6,11 @@
 #include <linux/io.h>
 #include <linux/clk-provider.h>
 #include <linux/clkdev.h>
+#include <linux/init.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
 #include <linux/clk/tegra.h>
 #include <linux/delay.h>
 #include <dt-bindings/clock/tegra20-car.h>
@@ -414,7 +417,7 @@ static struct tegra_clk_pll_params pll_e_params = {
 	.fixed_rate = 100000000,
 };
 
-static struct tegra_devclk devclks[] __initdata = {
+static struct tegra_devclk devclks[] = {
 	{ .con_id = "pll_c", .dt_id = TEGRA20_CLK_PLL_C },
 	{ .con_id = "pll_c_out1", .dt_id = TEGRA20_CLK_PLL_C_OUT1 },
 	{ .con_id = "pll_p", .dt_id = TEGRA20_CLK_PLL_P },
@@ -710,13 +713,6 @@ static void tegra20_super_clk_init(void)
 			      NULL);
 	clks[TEGRA20_CLK_CCLK] = clk;
 
-	/* SCLK */
-	clk = tegra_clk_register_super_mux("sclk", sclk_parents,
-			      ARRAY_SIZE(sclk_parents),
-			      CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
-			      clk_base + SCLK_BURST_POLICY, 0, 4, 0, 0, NULL);
-	clks[TEGRA20_CLK_SCLK] = clk;
-
 	/* twd */
 	clk = clk_register_fixed_factor(NULL, "twd", "cclk", 0, 1, 4);
 	clks[TEGRA20_CLK_TWD] = clk;
@@ -1014,7 +1010,7 @@ static struct tegra_cpu_car_ops tegra20_cpu_car_ops = {
 #endif
 };
 
-static struct tegra_clk_init_table init_table[] __initdata = {
+static struct tegra_clk_init_table init_table[] = {
 	{ TEGRA20_CLK_PLL_P, TEGRA20_CLK_CLK_MAX, 216000000, 1 },
 	{ TEGRA20_CLK_PLL_P_OUT1, TEGRA20_CLK_CLK_MAX, 28800000, 1 },
 	{ TEGRA20_CLK_PLL_P_OUT2, TEGRA20_CLK_CLK_MAX, 48000000, 1 },
@@ -1052,11 +1048,6 @@ static struct tegra_clk_init_table init_table[] __initdata = {
 	{ TEGRA20_CLK_CLK_MAX, TEGRA20_CLK_CLK_MAX, 0, 0 },
 };
 
-static void __init tegra20_clock_apply_init_table(void)
-{
-	tegra_init_from_table(init_table, clks, TEGRA20_CLK_CLK_MAX);
-}
-
 /*
  * Some clocks may be used by different drivers depending on the board
  * configuration.  List those here to register them twice in the clock lookup
@@ -1076,6 +1067,8 @@ static const struct of_device_id pmc_match[] __initconst = {
 	{ },
 };
 
+static bool tegra20_car_initialized;
+
 static struct clk *tegra20_clk_src_onecell_get(struct of_phandle_args *clkspec,
 					       void *data)
 {
@@ -1083,6 +1076,16 @@ static struct clk *tegra20_clk_src_onecell_get(struct of_phandle_args *clkspec,
 	struct clk_hw *hw;
 	struct clk *clk;
 
+	/*
+	 * Timer clocks are needed early, the rest of the clocks shouldn't be
+	 * available to device drivers until clock tree is fully initialized.
+	 */
+	if (clkspec->args[0] != TEGRA20_CLK_RTC &&
+	    clkspec->args[0] != TEGRA20_CLK_TWD &&
+	    clkspec->args[0] != TEGRA20_CLK_TIMER &&
+	    !tegra20_car_initialized)
+		return ERR_PTR(-EPROBE_DEFER);
+
 	clk = of_clk_src_onecell_get(clkspec, data);
 	if (IS_ERR(clk))
 		return clk;
@@ -1149,10 +1152,48 @@ static void __init tegra20_clock_init(struct device_node *np)
 	tegra_init_dup_clks(tegra_clk_duplicates, clks, TEGRA20_CLK_CLK_MAX);
 
 	tegra_add_of_provider(np, tegra20_clk_src_onecell_get);
-	tegra_register_devclks(devclks, ARRAY_SIZE(devclks));
-
-	tegra_clk_apply_init_table = tegra20_clock_apply_init_table;
 
 	tegra_cpu_car_ops = &tegra20_cpu_car_ops;
 }
-CLK_OF_DECLARE(tegra20, "nvidia,tegra20-car", tegra20_clock_init);
+CLK_OF_DECLARE_DRIVER(tegra20, "nvidia,tegra20-car", tegra20_clock_init);
+
+/*
+ * Clocks that use runtime PM can't be created at the tegra20_clock_init
+ * time because drivers' base isn't initialized yet, and thus platform
+ * devices can't be created for the clocks.  Hence we need to split the
+ * registration of the clocks into two phases.  The first phase registers
+ * essential clocks which don't require RPM and are actually used during
+ * early boot.  The second phase registers clocks which use RPM and this
+ * is done when device drivers' core API is ready.
+ */
+static int tegra20_car_probe(struct platform_device *pdev)
+{
+	struct clk *clk;
+
+	clk = tegra_clk_register_super_mux("sclk", sclk_parents,
+			      ARRAY_SIZE(sclk_parents),
+			      CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
+			      clk_base + SCLK_BURST_POLICY, 0, 4, 0, 0, NULL);
+	clks[TEGRA20_CLK_SCLK] = clk;
+
+	tegra_register_devclks(devclks, ARRAY_SIZE(devclks));
+	tegra_init_from_table(init_table, clks, TEGRA20_CLK_CLK_MAX);
+	tegra20_car_initialized = true;
+
+	return 0;
+}
+
+static const struct of_device_id tegra20_car_match[] = {
+	{ .compatible = "nvidia,tegra20-car" },
+	{ }
+};
+
+static struct platform_driver tegra20_car_driver = {
+	.driver = {
+		.name = "tegra20-car",
+		.of_match_table = tegra20_car_match,
+		.suppress_bind_attrs = true,
+	},
+	.probe = tegra20_car_probe,
+};
+builtin_platform_driver(tegra20_car_driver);

drivers/clk/tegra/clk-tegra30.c

@@ -7,8 +7,11 @@
 #include <linux/delay.h>
 #include <linux/clk-provider.h>
 #include <linux/clkdev.h>
+#include <linux/init.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
 #include <linux/clk/tegra.h>
 
 #include <soc/tegra/pmc.h>
@@ -532,7 +535,7 @@ static unsigned long tegra30_input_freq[] = {
 	[12] = 26000000,
 };
 
-static struct tegra_devclk devclks[] __initdata = {
+static struct tegra_devclk devclks[] = {
 	{ .con_id = "pll_c", .dt_id = TEGRA30_CLK_PLL_C },
 	{ .con_id = "pll_c_out1", .dt_id = TEGRA30_CLK_PLL_C_OUT1 },
 	{ .con_id = "pll_p", .dt_id = TEGRA30_CLK_PLL_P },
@@ -812,11 +815,6 @@ static void __init tegra30_pll_init(void)
 {
 	struct clk *clk;
 
-	/* PLLC */
-	clk = tegra_clk_register_pll("pll_c", "pll_ref", clk_base, pmc_base, 0,
-				     &pll_c_params, NULL);
-	clks[TEGRA30_CLK_PLL_C] = clk;
-
 	/* PLLC_OUT1 */
 	clk = tegra_clk_register_divider("pll_c_out1_div", "pll_c",
 				clk_base + PLLC_OUT, 0, TEGRA_DIVIDER_ROUND_UP,
@@ -826,11 +824,6 @@ static void __init tegra30_pll_init(void)
 				0, NULL);
 	clks[TEGRA30_CLK_PLL_C_OUT1] = clk;
 
-	/* PLLM */
-	clk = tegra_clk_register_pll("pll_m", "pll_ref", clk_base, pmc_base,
-			    CLK_SET_RATE_GATE, &pll_m_params, NULL);
-	clks[TEGRA30_CLK_PLL_M] = clk;
-
 	/* PLLM_OUT1 */
 	clk = tegra_clk_register_divider("pll_m_out1_div", "pll_m",
 				clk_base + PLLM_OUT, 0, TEGRA_DIVIDER_ROUND_UP,
@@ -880,9 +873,6 @@ static void __init tegra30_pll_init(void)
 			       ARRAY_SIZE(pll_e_parents),
 			       CLK_SET_RATE_NO_REPARENT,
 			       clk_base + PLLE_AUX, 2, 1, 0, NULL);
-	clk = tegra_clk_register_plle("pll_e", "pll_e_mux", clk_base, pmc_base,
-			     CLK_GET_RATE_NOCACHE, &pll_e_params, NULL);
-	clks[TEGRA30_CLK_PLL_E] = clk;
 }
 
 static const char *cclk_g_parents[] = { "clk_m", "pll_c", "clk_32k", "pll_m",
@@ -971,14 +961,6 @@ static void __init tegra30_super_clk_init(void)
 			      NULL);
 	clks[TEGRA30_CLK_CCLK_LP] = clk;
 
-	/* SCLK */
-	clk = tegra_clk_register_super_mux("sclk", sclk_parents,
-				  ARRAY_SIZE(sclk_parents),
-				  CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
-				  clk_base + SCLK_BURST_POLICY,
-				  0, 4, 0, 0, NULL);
-	clks[TEGRA30_CLK_SCLK] = clk;
-
 	/* twd */
 	clk = clk_register_fixed_factor(NULL, "twd", "cclk_g",
 					CLK_SET_RATE_PARENT, 1, 2);
@@ -1214,7 +1196,7 @@ static struct tegra_cpu_car_ops tegra30_cpu_car_ops = {
 #endif
 };
 
-static struct tegra_clk_init_table init_table[] __initdata = {
+static struct tegra_clk_init_table init_table[] = {
 	{ TEGRA30_CLK_UARTA, TEGRA30_CLK_PLL_P, 408000000, 0 },
 	{ TEGRA30_CLK_UARTB, TEGRA30_CLK_PLL_P, 408000000, 0 },
 	{ TEGRA30_CLK_UARTC, TEGRA30_CLK_PLL_P, 408000000, 0 },
@@ -1259,11 +1241,6 @@ static struct tegra_clk_init_table init_table[] __initdata = {
 	{ TEGRA30_CLK_CLK_MAX, TEGRA30_CLK_CLK_MAX, 0, 0 },
 };
 
-static void __init tegra30_clock_apply_init_table(void)
-{
-	tegra_init_from_table(init_table, clks, TEGRA30_CLK_CLK_MAX);
-}
-
 /*
  * Some clocks may be used by different drivers depending on the board
  * configuration.  List those here to register them twice in the clock lookup
@@ -1294,12 +1271,24 @@ static struct tegra_audio_clk_info tegra30_audio_plls[] = {
 	{ "pll_a", &pll_a_params, tegra_clk_pll_a, "pll_p_out1" },
 };
 
+static bool tegra30_car_initialized;
+
 static struct clk *tegra30_clk_src_onecell_get(struct of_phandle_args *clkspec,
 					       void *data)
 {
 	struct clk_hw *hw;
 	struct clk *clk;
 
+	/*
+	 * Timer clocks are needed early, the rest of the clocks shouldn't be
+	 * available to device drivers until clock tree is fully initialized.
+	 */
+	if (clkspec->args[0] != TEGRA30_CLK_RTC &&
+	    clkspec->args[0] != TEGRA30_CLK_TWD &&
+	    clkspec->args[0] != TEGRA30_CLK_TIMER &&
+	    !tegra30_car_initialized)
+		return ERR_PTR(-EPROBE_DEFER);
+
 	clk = of_clk_src_onecell_get(clkspec, data);
 	if (IS_ERR(clk))
 		return clk;
@@ -1357,10 +1346,75 @@ static void __init tegra30_clock_init(struct device_node *np)
 	tegra_init_dup_clks(tegra_clk_duplicates, clks, TEGRA30_CLK_CLK_MAX);
 
 	tegra_add_of_provider(np, tegra30_clk_src_onecell_get);
+
+	tegra_cpu_car_ops = &tegra30_cpu_car_ops;
+}
+CLK_OF_DECLARE_DRIVER(tegra30, "nvidia,tegra30-car", tegra30_clock_init);
+
+/*
+ * Clocks that use runtime PM can't be created at the tegra30_clock_init
+ * time because drivers' base isn't initialized yet, and thus platform
+ * devices can't be created for the clocks.  Hence we need to split the
+ * registration of the clocks into two phases.  The first phase registers
+ * essential clocks which don't require RPM and are actually used during
+ * early boot.  The second phase registers clocks which use RPM and this
+ * is done when device drivers' core API is ready.
+ */
+static int tegra30_car_probe(struct platform_device *pdev)
+{
+	struct clk *clk;
+
+	/* PLLC */
+	clk = tegra_clk_register_pll("pll_c", "pll_ref", clk_base, pmc_base, 0,
+				     &pll_c_params, NULL);
+	clks[TEGRA30_CLK_PLL_C] = clk;
+
+	/* PLLE */
+	clk = tegra_clk_register_plle("pll_e", "pll_e_mux", clk_base, pmc_base,
+				      CLK_GET_RATE_NOCACHE, &pll_e_params, NULL);
+	clks[TEGRA30_CLK_PLL_E] = clk;
+
+	/* PLLM */
+	clk = tegra_clk_register_pll("pll_m", "pll_ref", clk_base, pmc_base,
+				     CLK_SET_RATE_GATE, &pll_m_params, NULL);
+	clks[TEGRA30_CLK_PLL_M] = clk;
+
+	/* SCLK */
+	clk = tegra_clk_register_super_mux("sclk", sclk_parents,
+					   ARRAY_SIZE(sclk_parents),
+					   CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
+					   clk_base + SCLK_BURST_POLICY,
+					   0, 4, 0, 0, NULL);
+	clks[TEGRA30_CLK_SCLK] = clk;
+
 	tegra_register_devclks(devclks, ARRAY_SIZE(devclks));
+	tegra_init_from_table(init_table, clks, TEGRA30_CLK_CLK_MAX);
+	tegra30_car_initialized = true;
 
-	tegra_clk_apply_init_table = tegra30_clock_apply_init_table;
+	return 0;
+}
 
-	tegra_cpu_car_ops = &tegra30_cpu_car_ops;
+static const struct of_device_id tegra30_car_match[] = {
+	{ .compatible = "nvidia,tegra30-car" },
+	{ }
+};
+
+static struct platform_driver tegra30_car_driver = {
+	.driver = {
+		.name = "tegra30-car",
+		.of_match_table = tegra30_car_match,
+		.suppress_bind_attrs = true,
+	},
+	.probe = tegra30_car_probe,
+};
+
+/*
+ * Clock driver must be registered before memory controller driver,
+ * which doesn't support deferred probing for today and is registered
+ * from arch init-level.
+ */
+static int tegra30_car_init(void)
+{
+	return platform_driver_register(&tegra30_car_driver);
 }
-CLK_OF_DECLARE(tegra30, "nvidia,tegra30-car", tegra30_clock_init);
+postcore_initcall(tegra30_car_init);

drivers/clk/tegra/clk.c

@@ -9,14 +9,19 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/clk/tegra.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/reset-controller.h>
+#include <linux/string.h>
 
 #include <soc/tegra/fuse.h>
 
 #include "clk.h"
 
 /* Global data of Tegra CPU CAR ops */
+static struct device_node *tegra_car_np;
 static struct tegra_cpu_car_ops dummy_car_ops;
 struct tegra_cpu_car_ops *tegra_cpu_car_ops = &dummy_car_ops;
 
@@ -261,7 +266,7 @@ void __init tegra_init_dup_clks(struct tegra_clk_duplicate *dup_list,
 	}
 }
 
-void __init tegra_init_from_table(struct tegra_clk_init_table *tbl,
+void tegra_init_from_table(struct tegra_clk_init_table *tbl,
 			   struct clk *clks[], int clk_max)
 {
 	struct clk *clk;
@@ -320,6 +325,8 @@ void __init tegra_add_of_provider(struct device_node *np,
 {
 	int i;
 
+	tegra_car_np = np;
+
 	for (i = 0; i < clk_num; i++) {
 		if (IS_ERR(clks[i])) {
 			pr_err
@@ -348,7 +355,7 @@ void __init tegra_init_special_resets(unsigned int num,
 	special_reset_deassert = deassert;
 }
 
-void __init tegra_register_devclks(struct tegra_devclk *dev_clks, int num)
+void tegra_register_devclks(struct tegra_devclk *dev_clks, int num)
 {
 	int i;
 
@@ -372,6 +379,68 @@ struct clk ** __init tegra_lookup_dt_id(int clk_id,
 		return NULL;
 }
 
+static struct device_node *tegra_clk_get_of_node(struct clk_hw *hw)
+{
+	struct device_node *np;
+	char *node_name;
+
+	node_name = kstrdup(hw->init->name, GFP_KERNEL);
+	if (!node_name)
+		return NULL;
+
+	strreplace(node_name, '_', '-');
+
+	for_each_child_of_node(tegra_car_np, np) {
+		if (!strcmp(np->name, node_name))
+			break;
+	}
+
+	kfree(node_name);
+
+	return np;
+}
+
+struct clk *tegra_clk_dev_register(struct clk_hw *hw)
+{
+	struct platform_device *pdev, *parent;
+	const char *dev_name = NULL;
+	struct device *dev = NULL;
+	struct device_node *np;
+
+	np = tegra_clk_get_of_node(hw);
+
+	if (!of_device_is_available(np))
+		goto put_node;
+
+	dev_name = kasprintf(GFP_KERNEL, "tegra_clk_%s", hw->init->name);
+	if (!dev_name)
+		goto put_node;
+
+	parent = of_find_device_by_node(tegra_car_np);
+	if (parent) {
+		pdev = of_platform_device_create(np, dev_name, &parent->dev);
+		put_device(&parent->dev);
+
+		if (!pdev) {
+			pr_err("%s: failed to create device for %pOF\n",
+			       __func__, np);
+			goto free_name;
+		}
+
+		dev = &pdev->dev;
+		pm_runtime_enable(dev);
+	} else {
+		WARN(1, "failed to find device for %pOF\n", tegra_car_np);
+	}
+
+free_name:
+	kfree(dev_name);
+put_node:
+	of_node_put(np);
+
+	return clk_register(dev, hw);
+}
+
 tegra_clk_apply_init_table_func tegra_clk_apply_init_table;
 
 static int __init tegra_clocks_apply_init_table(void)

drivers/clk/tegra/clk.h

@@ -927,4 +927,6 @@ struct clk *tegra20_clk_register_emc(void __iomem *ioaddr, bool low_jitter);
 struct clk *tegra210_clk_register_emc(struct device_node *np,
 				      void __iomem *regs);
 
+struct clk *tegra_clk_dev_register(struct clk_hw *hw);
+
 #endif /* TEGRA_CLK_H */