Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid

Pull HID subsystem updates from Jiri Kosina:

 1) Support for HID over I2C bus has been added by Benjamin Tissoires.
    ACPI device discovery is still in the works.

 2) Support for Win8 Multitiouch protocol is being added, most work done
    by Benjamin Tissoires as well

 3) EIO/ERESTARTSYS is fixed in hiddev/hidraw, fixes by Andrew Duggan
    and Jiri Kosina

 4) ION iCade driver added by Bastien Nocera

 5) Support for a couple new Roccat devices has been added by Stefan
    Achatz

 6) HID sensor hubs are now auto-detected instead of having to list all
    the VID/PID combinations in the blacklist array

 7) other random fixes and support for new device IDs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (65 commits)
  HID: i2c-hid: add mutex protecting open/close race
  Revert "HID: sensors: add to special driver list"
  HID: sensors: autodetect USB HID sensor hubs
  HID: hidp: fallback to input session properly if hid is blacklisted
  HID: i2c-hid: fix ret_count check
  HID: i2c-hid: fix i2c_hid_get_raw_report count mismatches
  HID: i2c-hid: remove extra .irq field in struct i2c_hid
  HID: i2c-hid: reorder allocation/free of buffers
  HID: i2c-hid: fix memory corruption due to missing hid declaration
  HID: i2c-hid: remove superfluous include
  HID: i2c-hid: remove unneeded test in i2c_hid_remove
  HID: i2c-hid: i2c_hid_get_report may fail
  HID: i2c-hid: also call i2c_hid_free_buffers in i2c_hid_remove
  HID: i2c-hid: fix error messages
  HID: i2c-hid: fix return paths
  HID: i2c-hid: remove unused static declarations
  HID: i2c-hid: fix i2c_hid_dbg macro
  HID: i2c-hid: fix checkpatch.pl warning
  HID: i2c-hid: enhance Kconfig
  HID: i2c-hid: change I2C name
  ...

Documentation/ABI/obsolete/sysfs-driver-hid-roccat-koneplus

@@ -8,3 +8,41 @@ Description:	The integer value of this attribute ranges from 0-4.
 		When written, this file sets the number of the startup profile
 		and the mouse activates this profile immediately.
 		Please use actual_profile, it does the same thing.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/firmware_version
+Date:		October 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the raw integer version number of the
+		firmware reported by the mouse. Using the integer value eases
+		further usage in other programs. To receive the real version
+		number the decimal point has to be shifted 2 positions to the
+		left. E.g. a returned value of 121 means 1.21
+		This file is readonly.
+		Please read binary attribute info which contains firmware version.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile[1-5]_buttons
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_buttons holds information about button layout.
+		When read, these files return the respective profile buttons.
+		The returned data is 77 bytes in size.
+		This file is readonly.
+		Write control to select profile and read profile_buttons instead.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile[1-5]_settings
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_settings holds information like resolution, sensitivity
+		and light effects.
+		When read, these files return the respective profile settings.
+		The returned data is 43 bytes in size.
+		This file is readonly.
+		Write control to select profile and read profile_settings instead.
+Users:		http://roccat.sourceforge.net
\ No newline at end of file

Documentation/ABI/obsolete/sysfs-driver-hid-roccat-kovaplus

+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_cpi
+Date:		January 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 1-4.
+		When read, this attribute returns the number of the active
+		cpi level.
+		This file is readonly.
+		Has never been used. If bookkeeping is done, it's done in userland tools.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_sensitivity_x
+Date:		January 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 1-10.
+		When read, this attribute returns the number of the actual
+		sensitivity in x direction.
+		This file is readonly.
+		Has never been used. If bookkeeping is done, it's done in userland tools.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_sensitivity_y
+Date:		January 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 1-10.
+		When read, this attribute returns the number of the actual
+		sensitivity in y direction.
+		This file is readonly.
+		Has never been used. If bookkeeping is done, it's done in userland tools.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/firmware_version
+Date:		January 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the raw integer version number of the
+		firmware reported by the mouse. Using the integer value eases
+		further usage in other programs. To receive the real version
+		number the decimal point has to be shifted 2 positions to the
+		left. E.g. a returned value of 121 means 1.21
+		This file is readonly.
+		Obsoleted by binary sysfs attribute "info".
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile[1-5]_buttons
+Date:		January 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_buttons holds information about button layout.
+		When read, these files return the respective profile buttons.
+		The returned data is 23 bytes in size.
+		This file is readonly.
+		Write control to select profile and read profile_buttons instead.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile[1-5]_settings
+Date:		January 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_settings holds information like resolution, sensitivity
+		and light effects.
+		When read, these files return the respective profile settings.
+		The returned data is 16 bytes in size.
+		This file is readonly.
+		Write control to select profile and read profile_settings instead.
+Users:		http://roccat.sourceforge.net

Documentation/ABI/obsolete/sysfs-driver-hid-roccat-pyra

+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/actual_cpi
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	It is possible to switch the cpi setting of the mouse with the
+		press of a button.
+		When read, this file returns the raw number of the actual cpi
+		setting reported by the mouse. This number has to be further
+		processed to receive the real dpi value.
+
+		VALUE DPI
+		1     400
+		2     800
+		4     1600
+
+		This file is readonly.
+		Has never been used. If bookkeeping is done, it's done in userland tools.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/actual_profile
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the number of the actual profile in
+		range 0-4.
+		This file is readonly.
+		Please use binary attribute "settings" which provides this information.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/firmware_version
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When read, this file returns the raw integer version number of the
+		firmware reported by the mouse. Using the integer value eases
+		further usage in other programs. To receive the real version
+		number the decimal point has to be shifted 2 positions to the
+		left. E.g. a returned value of 138 means 1.38
+		This file is readonly.
+		Please use binary attribute "info" which provides this information.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile[1-5]_buttons
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_buttons holds information about button layout.
+		When read, these files return the respective profile buttons.
+		The returned data is 19 bytes in size.
+		This file is readonly.
+		Write control to select profile and read profile_buttons instead.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile[1-5]_settings
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The mouse can store 5 profiles which can be switched by the
+		press of a button. A profile is split in settings and buttons.
+		profile_settings holds information like resolution, sensitivity
+		and light effects.
+		When read, these files return the respective profile settings.
+		The returned data is 13 bytes in size.
+		This file is readonly.
+		Write control to select profile and read profile_settings instead.
+Users:		http://roccat.sourceforge.net
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/startup_profile
+Date:		August 2010
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	The integer value of this attribute ranges from 0-4.
+                When read, this attribute returns the number of the profile
+                that's active when the mouse is powered on.
+		This file is readonly.
+		Please use binary attribute "settings" which provides this information.
+Users:		http://roccat.sourceforge.net

Documentation/ABI/testing/sysfs-driver-hid-roccat-isku

@@ -117,6 +117,14 @@ Description:	When written, this file lets one store macros with max 500
 		which profile and key to read.
 Users:		http://roccat.sourceforge.net
 
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/reset
+Date:		November 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, this file lets one reset the device.
+		The data has to be 3 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/isku/roccatisku<minor>/control
 Date:		June 2011
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>

Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus

@@ -9,15 +9,12 @@ Description:	The integer value of this attribute ranges from 0-4.
 		and the mouse activates this profile immediately.
 Users:		http://roccat.sourceforge.net
 
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/firmware_version
-Date:		October 2010
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/info
+Date:		November 2012
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	When read, this file returns the raw integer version number of the
-		firmware reported by the mouse. Using the integer value eases
-		further usage in other programs. To receive the real version
-		number the decimal point has to be shifted 2 positions to the
-		left. E.g. a returned value of 121 means 1.21
-		This file is readonly.
+Description:	When read, this file returns general data like firmware version.
+		When written, the device can be reset.
+		The data is 8 bytes long.
 Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/macro
@@ -42,18 +39,8 @@ Description:	The mouse can store 5 profiles which can be switched by the
 		The mouse will reject invalid data.
 		Which profile to write is determined by the profile number
 		contained in the data.
-		This file is writeonly.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile[1-5]_buttons
-Date:		August 2010
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	The mouse can store 5 profiles which can be switched by the
-		press of a button. A profile is split in settings and buttons.
-		profile_buttons holds information about button layout.
-		When read, these files return the respective profile buttons.
-		The returned data is 77 bytes in size.
-		This file is readonly.
+		Before reading this file, control has to be written to select
+		which profile to read.
 Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile_settings
@@ -68,19 +55,8 @@ Description:	The mouse can store 5 profiles which can be switched by the
 		The mouse will reject invalid data.
 		Which profile to write is determined by the profile number
 		contained in the data.
-		This file is writeonly.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/profile[1-5]_settings
-Date:		August 2010
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	The mouse can store 5 profiles which can be switched by the
-		press of a button. A profile is split in settings and buttons.
-		profile_settings holds information like resolution, sensitivity
-		and light effects.
-		When read, these files return the respective profile settings.
-		The returned data is 43 bytes in size.
-		This file is readonly.
+		Before reading this file, control has to be written to select
+		which profile to read.
 Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/sensor
@@ -104,9 +80,9 @@ What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-
 Date:		October 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	When written a calibration process for the tracking control unit
-		can be initiated/cancelled.
-		The data has to be 3 bytes long.
-		This file is writeonly.
+		can be initiated/cancelled. Also lets one read/write sensor
+		registers.
+		The data has to be 4 bytes long.
 Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/tcu_image

Documentation/ABI/testing/sysfs-driver-hid-roccat-kovaplus

-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_cpi
-Date:		January 2011
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	The integer value of this attribute ranges from 1-4.
-		When read, this attribute returns the number of the active
-		cpi level.
-		This file is readonly.
-Users:		http://roccat.sourceforge.net
-
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_profile
 Date:		January 2011
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
@@ -18,33 +9,12 @@ Description:	The integer value of this attribute ranges from 0-4.
 		active when the mouse is powered on.
 Users:		http://roccat.sourceforge.net
 
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_sensitivity_x
-Date:		January 2011
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/info
+Date:		November 2012
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	The integer value of this attribute ranges from 1-10.
-		When read, this attribute returns the number of the actual
-		sensitivity in x direction.
-		This file is readonly.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/actual_sensitivity_y
-Date:		January 2011
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	The integer value of this attribute ranges from 1-10.
-		When read, this attribute returns the number of the actual
-		sensitivity in y direction.
-		This file is readonly.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/firmware_version
-Date:		January 2011
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	When read, this file returns the raw integer version number of the
-		firmware reported by the mouse. Using the integer value eases
-		further usage in other programs. To receive the real version
-		number the decimal point has to be shifted 2 positions to the
-		left. E.g. a returned value of 121 means 1.21
-		This file is readonly.
+Description:	When read, this file returns general data like firmware version.
+		When written, the device can be reset.
+		The data is 6 bytes long.
 Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile_buttons
@@ -58,18 +28,8 @@ Description:	The mouse can store 5 profiles which can be switched by the
 		The mouse will reject invalid data.
 		Which profile to write is determined by the profile number
 		contained in the data.
-		This file is writeonly.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile[1-5]_buttons
-Date:		January 2011
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	The mouse can store 5 profiles which can be switched by the
-		press of a button. A profile is split in settings and buttons.
-		profile_buttons holds information about button layout.
-		When read, these files return the respective profile buttons.
-		The returned data is 23 bytes in size.
-		This file is readonly.
+		Before reading this file, control has to be written to select
+		which profile to read.
 Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile_settings
@@ -84,17 +44,6 @@ Description:	The mouse can store 5 profiles which can be switched by the
 		The mouse will reject invalid data.
 		Which profile to write is determined by the profile number
 		contained in the data.
-		This file is writeonly.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/kovaplus/roccatkovaplus<minor>/profile[1-5]_settings
-Date:		January 2011
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	The mouse can store 5 profiles which can be switched by the
-		press of a button. A profile is split in settings and buttons.
-		profile_settings holds information like resolution, sensitivity
-		and light effects.
-		When read, these files return the respective profile settings.
-		The returned data is 16 bytes in size.
-		This file is readonly.
+		Before reading this file, control has to be written to select
+		which profile to read.
 Users:		http://roccat.sourceforge.net

Documentation/ABI/testing/sysfs-driver-hid-roccat-lua

+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/control
+Date:		October 2012
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	When written, cpi, button and light settings can be configured.
+		When read, actual cpi setting and sensor data are returned.
+		The data has to be 8 bytes long.
+Users:		http://roccat.sourceforge.net

Documentation/ABI/testing/sysfs-driver-hid-roccat-pyra

-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/actual_cpi
-Date:		August 2010
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	It is possible to switch the cpi setting of the mouse with the
-		press of a button.
-		When read, this file returns the raw number of the actual cpi
-		setting reported by the mouse. This number has to be further
-		processed to receive the real dpi value.
-
-		VALUE DPI
-		1     400
-		2     800
-		4     1600
-
-		This file is readonly.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/actual_profile
-Date:		August 2010
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/info
+Date:		November 2012
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	When read, this file returns the number of the actual profile in
-		range 0-4.
-		This file is readonly.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/firmware_version
-Date:		August 2010
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	When read, this file returns the raw integer version number of the
-		firmware reported by the mouse. Using the integer value eases
-		further usage in other programs. To receive the real version
-		number the decimal point has to be shifted 2 positions to the
-		left. E.g. a returned value of 138 means 1.38
-		This file is readonly.
+Description:	When read, this file returns general data like firmware version.
+		When written, the device can be reset.
+		The data is 6 bytes long.
 Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile_settings
@@ -46,19 +18,8 @@ Description:	The mouse can store 5 profiles which can be switched by the
 		The mouse will reject invalid data.
 		Which profile to write is determined by the profile number
 		contained in the data.
-		This file is writeonly.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile[1-5]_settings
-Date:		August 2010
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	The mouse can store 5 profiles which can be switched by the
-		press of a button. A profile is split in settings and buttons.
-		profile_settings holds information like resolution, sensitivity
-		and light effects.
-		When read, these files return the respective profile settings.
-		The returned data is 13 bytes in size.
-		This file is readonly.
+		Before reading this file, control has to be written to select
+		which profile to read.
 Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile_buttons
@@ -72,27 +33,8 @@ Description:	The mouse can store 5 profiles which can be switched by the
 		The mouse will reject invalid data.
 		Which profile to write is determined by the profile number
 		contained in the data.
-		This file is writeonly.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/profile[1-5]_buttons
-Date:		August 2010
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	The mouse can store 5 profiles which can be switched by the
-		press of a button. A profile is split in settings and buttons.
-		profile_buttons holds information about button layout.
-		When read, these files return the respective profile buttons.
-		The returned data is 19 bytes in size.
-		This file is readonly.
-Users:		http://roccat.sourceforge.net
-
-What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/startup_profile
-Date:		August 2010
-Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
-Description:	The integer value of this attribute ranges from 0-4.
-                When read, this attribute returns the number of the profile
-                that's active when the mouse is powered on.
-		This file is readonly.
+		Before reading this file, control has to be written to select
+		which profile to read.
 Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/pyra/roccatpyra<minor>/settings

Documentation/ABI/testing/sysfs-driver-hid-roccat-savu

@@ -40,8 +40,8 @@ What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-
 Date:		Mai 2012
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
 Description:	When read, this file returns general data like firmware version.
+		When written, the device can be reset.
 		The data is 8 bytes long.
-		This file is readonly.
 Users:		http://roccat.sourceforge.net
 
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/savu/roccatsavu<minor>/macro
@@ -74,4 +74,3 @@ Description:	The mouse has a Avago ADNS-3090 sensor.
 		This file allows reading and writing of the mouse sensors registers.
 		The data has to be 4 bytes long.
 Users:		http://roccat.sourceforge.net
-

Documentation/input/event-codes.txt

@@ -196,6 +196,17 @@ EV_MSC:
 EV_MSC events are used for input and output events that do not fall under other
 categories.
 
+A few EV_MSC codes have special meaning:
+
+* MSC_TIMESTAMP:
+  - Used to report the number of microseconds since the last reset. This event
+    should be coded as an uint32 value, which is allowed to wrap around with
+    no special consequence. It is assumed that the time difference between two
+    consecutive events is reliable on a reasonable time scale (hours).
+    A reset to zero can happen, in which case the time since the last event is
+    unknown.  If the device does not provide this information, the driver must
+    not provide it to user space.
+
 EV_LED:
 ----------
 EV_LED events are used for input and output to set and query the state of

drivers/hid/Kconfig

@@ -265,6 +265,15 @@ config HID_GYRATION
 	---help---
 	Support for Gyration remote control.
 
+config HID_ICADE
+	tristate "ION iCade arcade controller"
+	depends on BT_HIDP
+	---help---
+	Support for the ION iCade arcade controller to work as a joystick.
+
+	To compile this driver as a module, choose M here: the
+	module will be called hid-icade.
+
 config HID_TWINHAN
 	tristate "Twinhan IR remote control"
 	depends on USB_HID
@@ -728,4 +737,6 @@ endif # HID
 
 source "drivers/hid/usbhid/Kconfig"
 
+source "drivers/hid/i2c-hid/Kconfig"
+
 endmenu

drivers/hid/Makefile

@@ -52,6 +52,7 @@ obj-$(CONFIG_HID_GYRATION)	+= hid-gyration.o
 obj-$(CONFIG_HID_HOLTEK)	+= hid-holtek-kbd.o
 obj-$(CONFIG_HID_HOLTEK)	+= hid-holtekff.o
 obj-$(CONFIG_HID_HYPERV_MOUSE)	+= hid-hyperv.o
+obj-$(CONFIG_HID_ICADE)		+= hid-icade.o
 obj-$(CONFIG_HID_KENSINGTON)	+= hid-kensington.o
 obj-$(CONFIG_HID_KEYTOUCH)	+= hid-keytouch.o
 obj-$(CONFIG_HID_KYE)		+= hid-kye.o
@@ -93,8 +94,8 @@ obj-$(CONFIG_HID_PRIMAX)	+= hid-primax.o
 obj-$(CONFIG_HID_PS3REMOTE)	+= hid-ps3remote.o
 obj-$(CONFIG_HID_ROCCAT)	+= hid-roccat.o hid-roccat-common.o \
 	hid-roccat-arvo.o hid-roccat-isku.o hid-roccat-kone.o \
-	hid-roccat-koneplus.o hid-roccat-kovaplus.o hid-roccat-pyra.o \
-	hid-roccat-savu.o
+	hid-roccat-koneplus.o hid-roccat-kovaplus.o hid-roccat-lua.o \
+	hid-roccat-pyra.o hid-roccat-savu.o
 obj-$(CONFIG_HID_SAITEK)	+= hid-saitek.o
 obj-$(CONFIG_HID_SAMSUNG)	+= hid-samsung.o
 obj-$(CONFIG_HID_SMARTJOYPLUS)	+= hid-sjoy.o
@@ -118,3 +119,4 @@ obj-$(CONFIG_USB_HID)		+= usbhid/
 obj-$(CONFIG_USB_MOUSE)		+= usbhid/
 obj-$(CONFIG_USB_KBD)		+= usbhid/
 
+obj-$(CONFIG_I2C_HID)		+= i2c-hid/

drivers/hid/hid-apple.c

@@ -439,7 +439,8 @@ static const struct hid_device_id apple_devices[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ANSI),
 		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ISO),
-		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN },
+		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
+			APPLE_ISO_KEYBOARD },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_JIS),
 		.driver_data = APPLE_NUMLOCK_EMULATION | APPLE_HAS_FN |
 			APPLE_RDESC_JIS },

drivers/hid/hid-core.c

@@ -92,6 +92,7 @@ EXPORT_SYMBOL_GPL(hid_register_report);
 static struct hid_field *hid_register_field(struct hid_report *report, unsigned usages, unsigned values)
 {
 	struct hid_field *field;
+	int i;
 
 	if (report->maxfield == HID_MAX_FIELDS) {
 		hid_err(report->device, "too many fields in report\n");
@@ -110,6 +111,9 @@ static struct hid_field *hid_register_field(struct hid_report *report, unsigned
 	field->value = (s32 *)(field->usage + usages);
 	field->report = report;
 
+	for (i = 0; i < usages; i++)
+		field->usage[i].usage_index = i;
+
 	return field;
 }
 
@@ -315,6 +319,7 @@ static s32 item_sdata(struct hid_item *item)
 
 static int hid_parser_global(struct hid_parser *parser, struct hid_item *item)
 {
+	__u32 raw_value;
 	switch (item->tag) {
 	case HID_GLOBAL_ITEM_TAG_PUSH:
 
@@ -365,7 +370,14 @@ static int hid_parser_global(struct hid_parser *parser, struct hid_item *item)
 		return 0;
 
 	case HID_GLOBAL_ITEM_TAG_UNIT_EXPONENT:
-		parser->global.unit_exponent = item_sdata(item);
+		/* Units exponent negative numbers are given through a
+		 * two's complement.
+		 * See "6.2.2.7 Global Items" for more information. */
+		raw_value = item_udata(item);
+		if (!(raw_value & 0xfffffff0))
+			parser->global.unit_exponent = hid_snto32(raw_value, 4);
+		else
+			parser->global.unit_exponent = raw_value;
 		return 0;
 
 	case HID_GLOBAL_ITEM_TAG_UNIT:
@@ -713,7 +725,12 @@ static int hid_scan_report(struct hid_device *hid)
 					hid_scan_usage(hid, u);
 				break;
 			}
-		}
+		} else if (page == HID_UP_SENSOR &&
+			item.type == HID_ITEM_TYPE_MAIN &&
+			item.tag == HID_MAIN_ITEM_TAG_BEGIN_COLLECTION &&
+			(item_udata(&item) & 0xff) == HID_COLLECTION_PHYSICAL &&
+			hid->bus == BUS_USB)
+			hid->group = HID_GROUP_SENSOR_HUB;
 	}
 
 	return 0;
@@ -865,6 +882,12 @@ static s32 snto32(__u32 value, unsigned n)
 	return value & (1 << (n - 1)) ? value | (-1 << n) : value;
 }
 
+s32 hid_snto32(__u32 value, unsigned n)
+{
+	return snto32(value, n);
+}
+EXPORT_SYMBOL_GPL(hid_snto32);
+
 /*
  * Convert a signed 32-bit integer to a signed n-bit integer.
  */
@@ -1465,6 +1488,10 @@ EXPORT_SYMBOL_GPL(hid_disconnect);
  * there is a proper autodetection and autoloading in place (based on presence
  * of HID_DG_CONTACTID), so those devices don't need to be added to this list,
  * as we are doing the right thing in hid_scan_usage().
+ *
+ * Autodetection for (USB) HID sensor hubs exists too. If a collection of type
+ * physical is found inside a usage page of type sensor, hid-sensor-hub will be
+ * used as a driver. See hid_scan_report().
  */
 static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_A4TECH, USB_DEVICE_ID_A4TECH_WCP32PU) },
@@ -1538,6 +1565,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ANSI) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_JIS) },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ANSI) },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ISO) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY) },
@@ -1571,10 +1599,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_GYRATION, USB_DEVICE_ID_GYRATION_REMOTE_3) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK, USB_DEVICE_ID_HOLTEK_ON_LINE_GRIP) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_HOLTEK_ALT, USB_DEVICE_ID_HOLTEK_ALT_KEYBOARD) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_INTEL_8086, USB_DEVICE_ID_SENSOR_HUB_1020) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_INTEL_8086, USB_DEVICE_ID_SENSOR_HUB_09FA) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_INTEL_8087, USB_DEVICE_ID_SENSOR_HUB_1020) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_INTEL_8087, USB_DEVICE_ID_SENSOR_HUB_09FA) },
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ION, USB_DEVICE_ID_ICADE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_KENSINGTON, USB_DEVICE_ID_KS_SLIMBLADE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_KEYTOUCH, USB_DEVICE_ID_KEYTOUCH_IEC) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_ERGO_525V) },
@@ -1658,6 +1683,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_ISKU) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_KONEPLUS) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_KOVAPLUS) },
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_LUA) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_PYRA_WIRED) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_PYRA_WIRELESS) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_SAVU) },
@@ -1672,7 +1698,6 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_VAIO_VGX_MOUSE) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_SUNPLUS, USB_DEVICE_ID_SUNPLUS_WDESKTOP) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_STANTUM_STM, USB_DEVICE_ID_SENSOR_HUB_7014) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb300) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb304) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb323) },
@@ -2150,8 +2175,13 @@ static const struct hid_device_id hid_mouse_ignore_list[] = {
 	{ }
 };
 
-static bool hid_ignore(struct hid_device *hdev)
+bool hid_ignore(struct hid_device *hdev)
 {
+	if (hdev->quirks & HID_QUIRK_NO_IGNORE)
+		return false;
+	if (hdev->quirks & HID_QUIRK_IGNORE)
+		return true;
+
 	switch (hdev->vendor) {
 	case USB_VENDOR_ID_CODEMERCS:
 		/* ignore all Code Mercenaries IOWarrior devices */
@@ -2189,6 +2219,15 @@ static bool hid_ignore(struct hid_device *hdev)
 				hdev->type == HID_TYPE_USBNONE)
 			return true;
 		break;
+	case USB_VENDOR_ID_DWAV:
+		/* These are handled by usbtouchscreen. hdev->type is probably
+		 * HID_TYPE_USBNONE, but we say !HID_TYPE_USBMOUSE to match
+		 * usbtouchscreen. */
+		if ((hdev->product == USB_DEVICE_ID_EGALAX_TOUCHCONTROLLER ||
+		     hdev->product == USB_DEVICE_ID_DWAV_TOUCHCONTROLLER) &&
+		    hdev->type != HID_TYPE_USBMOUSE)
+			return true;
+		break;
 	}
 
 	if (hdev->type == HID_TYPE_USBMOUSE &&
@@ -2197,6 +2236,7 @@ static bool hid_ignore(struct hid_device *hdev)
 
 	return !!hid_match_id(hdev, hid_ignore_list);
 }
+EXPORT_SYMBOL_GPL(hid_ignore);
 
 int hid_add_device(struct hid_device *hdev)
 {
@@ -2208,8 +2248,7 @@ int hid_add_device(struct hid_device *hdev)
 
 	/* we need to kill them here, otherwise they will stay allocated to
 	 * wait for coming driver */
-	if (!(hdev->quirks & HID_QUIRK_NO_IGNORE)
-            && (hid_ignore(hdev) || (hdev->quirks & HID_QUIRK_IGNORE)))
+	if (hid_ignore(hdev))
 		return -ENODEV;
 
 	/*

drivers/hid/hid-icade.c

+/*
+ *  ION iCade input driver
+ *
+ *  Copyright (c) 2012 Bastien Nocera <hadess@hadess.net>
+ *  Copyright (c) 2012 Benjamin Tissoires <benjamin.tissoires@gmail.com>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+
+#include "hid-ids.h"
+
+/*
+ *   ↑      A C Y L
+ *  ← →
+ *   ↓      B X Z R
+ *
+ *
+ *  UP ON,OFF  = w,e
+ *  RT ON,OFF  = d,c
+ *  DN ON,OFF  = x,z
+ *  LT ON,OFF  = a,q
+ *  A  ON,OFF  = y,t
+ *  B  ON,OFF  = h,r
+ *  C  ON,OFF  = u,f
+ *  X  ON,OFF  = j,n
+ *  Y  ON,OFF  = i,m
+ *  Z  ON,OFF  = k,p
+ *  L  ON,OFF  = o,g
+ *  R  ON,OFF  = l,v
+ */
+
+/* The translation code uses HID usage instead of input layer
+ * keys. This code generates a lookup table that makes
+ * translation quick.
+ *
+ * #include <linux/input.h>
+ * #include <stdio.h>
+ * #include <assert.h>
+ *
+ * #define unk     KEY_UNKNOWN
+ *
+ * < copy of hid_keyboard[] from hid-input.c >
+ *
+ * struct icade_key_translation {
+ *     int         from;
+ *     const char *to;
+ *     int         press;
+ * };
+ *
+ * static const struct icade_key_translation icade_keys[] = {
+ *    { KEY_W,        "KEY_UP",         1 },
+ *    { KEY_E,        "KEY_UP",         0 },
+ *    { KEY_D,        "KEY_RIGHT",      1 },
+ *    { KEY_C,        "KEY_RIGHT",      0 },
+ *    { KEY_X,        "KEY_DOWN",       1 },
+ *    { KEY_Z,        "KEY_DOWN",       0 },
+ *    { KEY_A,        "KEY_LEFT",       1 },
+ *    { KEY_Q,        "KEY_LEFT",       0 },
+ *    { KEY_Y,        "BTN_A",          1 },
+ *    { KEY_T,        "BTN_A",          0 },
+ *    { KEY_H,        "BTN_B",          1 },
+ *    { KEY_R,        "BTN_B",          0 },
+ *    { KEY_U,        "BTN_C",          1 },
+ *    { KEY_F,        "BTN_C",          0 },
+ *    { KEY_J,        "BTN_X",          1 },
+ *    { KEY_N,        "BTN_X",          0 },
+ *    { KEY_I,        "BTN_Y",          1 },
+ *    { KEY_M,        "BTN_Y",          0 },
+ *    { KEY_K,        "BTN_Z",          1 },
+ *    { KEY_P,        "BTN_Z",          0 },
+ *    { KEY_O,        "BTN_THUMBL",     1 },
+ *    { KEY_G,        "BTN_THUMBL",     0 },
+ *    { KEY_L,        "BTN_THUMBR",     1 },
+ *    { KEY_V,        "BTN_THUMBR",     0 },
+ *
+ *    { }
+ * };
+ *
+ * static int
+ * usage_for_key (int key)
+ * {
+ *     int i;
+ *     for (i = 0; i < 256; i++) {
+ *     if (hid_keyboard[i] == key)
+ *         return i;
+ *     }
+ *     assert(0);
+ * }
+ *
+ * int main (int argc, char **argv)
+ * {
+ *     const struct icade_key_translation *trans;
+ *     int max_usage = 0;
+ *
+ *     for (trans = icade_keys; trans->from; trans++) {
+ *         int usage = usage_for_key (trans->from);
+ *         max_usage = usage > max_usage ? usage : max_usage;
+ *     }
+ *
+ *     printf ("#define ICADE_MAX_USAGE %d\n\n", max_usage);
+ *     printf ("struct icade_key {\n");
+ *     printf ("\tu16 to;\n");
+ *     printf ("\tu8 press:1;\n");
+ *     printf ("};\n\n");
+ *     printf ("static const struct icade_key "
+ *             "icade_usage_table[%d] = {\n", max_usage + 1);
+ *     for (trans = icade_keys; trans->from; trans++) {
+ *         printf ("\t[%d] = { %s, %d },\n",
+ *                 usage_for_key (trans->from), trans->to, trans->press);
+ *     }
+ *     printf ("};\n");
+ *
+ *     return 0;
+ * }
+ */
+
+#define ICADE_MAX_USAGE 29
+
+struct icade_key {
+	u16 to;
+	u8 press:1;
+};
+
+static const struct icade_key icade_usage_table[30] = {
+	[26] = { KEY_UP, 1 },
+	[8] = { KEY_UP, 0 },
+	[7] = { KEY_RIGHT, 1 },
+	[6] = { KEY_RIGHT, 0 },
+	[27] = { KEY_DOWN, 1 },
+	[29] = { KEY_DOWN, 0 },
+	[4] = { KEY_LEFT, 1 },
+	[20] = { KEY_LEFT, 0 },
+	[28] = { BTN_A, 1 },
+	[23] = { BTN_A, 0 },
+	[11] = { BTN_B, 1 },
+	[21] = { BTN_B, 0 },
+	[24] = { BTN_C, 1 },
+	[9] = { BTN_C, 0 },
+	[13] = { BTN_X, 1 },
+	[17] = { BTN_X, 0 },
+	[12] = { BTN_Y, 1 },
+	[16] = { BTN_Y, 0 },
+	[14] = { BTN_Z, 1 },
+	[19] = { BTN_Z, 0 },
+	[18] = { BTN_THUMBL, 1 },
+	[10] = { BTN_THUMBL, 0 },
+	[15] = { BTN_THUMBR, 1 },
+	[25] = { BTN_THUMBR, 0 },
+};
+
+static const struct icade_key *icade_find_translation(u16 from)
+{
+	if (from < 0 || from > ICADE_MAX_USAGE)
+		return NULL;
+	return &icade_usage_table[from];
+}
+
+static int icade_event(struct hid_device *hdev, struct hid_field *field,
+		struct hid_usage *usage, __s32 value)
+{
+	const struct icade_key *trans;
+
+	if (!(hdev->claimed & HID_CLAIMED_INPUT) || !field->hidinput ||
+			!usage->type)
+		return 0;
+
+	/* We ignore the fake key up, and act only on key down */
+	if (!value)
+		return 1;
+
+	trans = icade_find_translation(usage->hid & HID_USAGE);
+
+	if (!trans)
+		return 1;
+
+	input_event(field->hidinput->input, usage->type,
+			trans->to, trans->press);
+
+	return 1;
+}
+
+static int icade_input_mapping(struct hid_device *hdev, struct hid_input *hi,
+		struct hid_field *field, struct hid_usage *usage,
+		unsigned long **bit, int *max)
+{
+	const struct icade_key *trans;
+
+	if ((usage->hid & HID_USAGE_PAGE) == HID_UP_KEYBOARD) {
+		trans = icade_find_translation(usage->hid & HID_USAGE);
+
+		if (!trans)
+			return -1;
+
+		hid_map_usage(hi, usage, bit, max, EV_KEY, trans->to);
+		set_bit(trans->to, hi->input->keybit);
+
+		return 1;
+	}
+
+	/* ignore others */
+	return -1;
+
+}
+
+static int icade_input_mapped(struct hid_device *hdev, struct hid_input *hi,
+		struct hid_field *field, struct hid_usage *usage,
+		unsigned long **bit, int *max)
+{
+	if (usage->type == EV_KEY)
+		set_bit(usage->type, hi->input->evbit);
+
+	return -1;
+}
+
+static const struct hid_device_id icade_devices[] = {
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_ION, USB_DEVICE_ID_ICADE) },
+
+	{ }
+};
+MODULE_DEVICE_TABLE(hid, icade_devices);
+
+static struct hid_driver icade_driver = {
+	.name = "icade",
+	.id_table = icade_devices,
+	.event = icade_event,
+	.input_mapped = icade_input_mapped,
+	.input_mapping = icade_input_mapping,
+};
+
+static int __init icade_init(void)
+{
+	int ret;
+
+	ret = hid_register_driver(&icade_driver);
+	if (ret)
+		pr_err("can't register icade driver\n");
+
+	return ret;
+}
+
+static void __exit icade_exit(void)
+{
+	hid_unregister_driver(&icade_driver);
+}
+
+module_init(icade_init);
+module_exit(icade_exit);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Bastien Nocera <hadess@hadess.net>");
+MODULE_DESCRIPTION("ION iCade input driver");

drivers/hid/hid-ids.h

@@ -257,6 +257,7 @@
 
 #define USB_VENDOR_ID_DWAV		0x0eef
 #define USB_DEVICE_ID_EGALAX_TOUCHCONTROLLER	0x0001
+#define USB_DEVICE_ID_DWAV_TOUCHCONTROLLER	0x0002
 #define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_480D	0x480d
 #define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_480E	0x480e
 #define USB_DEVICE_ID_DWAV_EGALAX_MULTITOUCH_7207	0x7207
@@ -423,6 +424,9 @@
 #define USB_VENDOR_ID_ILITEK		0x222a
 #define USB_DEVICE_ID_ILITEK_MULTITOUCH	0x0001
 
+#define USB_VENDOR_ID_ION		0x15e4
+#define USB_DEVICE_ID_ICADE		0x0132
+
 #define USB_VENDOR_ID_HOLTEK		0x1241
 #define USB_DEVICE_ID_HOLTEK_ON_LINE_GRIP	0x5015
 
@@ -432,11 +436,6 @@
 #define USB_VENDOR_ID_IMATION		0x0718
 #define USB_DEVICE_ID_DISC_STAKKA	0xd000
 
-#define USB_VENDOR_ID_INTEL_8086	0x8086
-#define USB_VENDOR_ID_INTEL_8087	0x8087
-#define USB_DEVICE_ID_SENSOR_HUB_1020	0x1020
-#define USB_DEVICE_ID_SENSOR_HUB_09FA	0x09FA
-
 #define USB_VENDOR_ID_IRTOUCHSYSTEMS	0x6615
 #define USB_DEVICE_ID_IRTOUCH_INFRARED_USB	0x0070
 
@@ -603,6 +602,7 @@
 
 #define USB_VENDOR_ID_NOVATEK		0x0603
 #define USB_DEVICE_ID_NOVATEK_PCT	0x0600
+#define USB_DEVICE_ID_NOVATEK_MOUSE	0x1602
 
 #define USB_VENDOR_ID_NTRIG		0x1b96
 #define USB_DEVICE_ID_NTRIG_TOUCH_SCREEN   0x0001
@@ -677,7 +677,9 @@
 #define USB_DEVICE_ID_ROCCAT_ISKU	0x319c
 #define USB_DEVICE_ID_ROCCAT_KONE	0x2ced
 #define USB_DEVICE_ID_ROCCAT_KONEPLUS	0x2d51
+#define USB_DEVICE_ID_ROCCAT_KONEXTD	0x2e22
 #define USB_DEVICE_ID_ROCCAT_KOVAPLUS	0x2d50
+#define USB_DEVICE_ID_ROCCAT_LUA	0x2c2e
 #define USB_DEVICE_ID_ROCCAT_PYRA_WIRED	0x2c24
 #define USB_DEVICE_ID_ROCCAT_PYRA_WIRELESS	0x2cf6
 #define USB_DEVICE_ID_ROCCAT_SAVU	0x2d5a
@@ -696,6 +698,9 @@
 #define USB_VENDOR_ID_SIGMA_MICRO	0x1c4f
 #define USB_DEVICE_ID_SIGMA_MICRO_KEYBOARD	0x0002
 
+#define USB_VENDOR_ID_SIGMATEL		0x066F
+#define USB_DEVICE_ID_SIGMATEL_STMP3780	0x3780
+
 #define USB_VENDOR_ID_SKYCABLE			0x1223
 #define	USB_DEVICE_ID_SKYCABLE_WIRELESS_PRESENTER	0x3F07
 
@@ -714,7 +719,6 @@
 
 #define USB_VENDOR_ID_STANTUM_STM		0x0483
 #define USB_DEVICE_ID_MTP_STM		0x3261
-#define USB_DEVICE_ID_SENSOR_HUB_7014	0x7014
 
 #define USB_VENDOR_ID_STANTUM_SITRONIX		0x1403
 #define USB_DEVICE_ID_MTP_SITRONIX		0x5001
@@ -762,6 +766,9 @@
 #define USB_VENDOR_ID_TOUCHPACK		0x1bfd
 #define USB_DEVICE_ID_TOUCHPACK_RTS	0x1688
 
+#define USB_VENDOR_ID_TPV		0x25aa
+#define USB_DEVICE_ID_TPV_OPTICAL_TOUCHSCREEN	0x8883
+
 #define USB_VENDOR_ID_TURBOX		0x062a
 #define USB_DEVICE_ID_TURBOX_KEYBOARD	0x0201
 #define USB_DEVICE_ID_TURBOX_TOUCHSCREEN_MOSART	0x7100

drivers/hid/hid-input.c

@@ -192,7 +192,6 @@ static int hidinput_setkeycode(struct input_dev *dev,
 	return -EINVAL;
 }
 
-
 /**
  * hidinput_calc_abs_res - calculate an absolute axis resolution
  * @field: the HID report field to calculate resolution for
@@ -208,7 +207,7 @@ static int hidinput_setkeycode(struct input_dev *dev,
  * Only exponent 1 length units are processed. Centimeters and inches are
  * converted to millimeters. Degrees are converted to radians.
  */
-static __s32 hidinput_calc_abs_res(const struct hid_field *field, __u16 code)
+__s32 hidinput_calc_abs_res(const struct hid_field *field, __u16 code)
 {
 	__s32 unit_exponent = field->unit_exponent;
 	__s32 logical_extents = field->logical_maximum -
@@ -229,17 +228,29 @@ static __s32 hidinput_calc_abs_res(const struct hid_field *field, __u16 code)
 	case ABS_X:
 	case ABS_Y:
 	case ABS_Z:
-		if (field->unit == 0x11) {		/* If centimeters */
+	case ABS_MT_POSITION_X:
+	case ABS_MT_POSITION_Y:
+	case ABS_MT_TOOL_X:
+	case ABS_MT_TOOL_Y:
+	case ABS_MT_TOUCH_MAJOR:
+	case ABS_MT_TOUCH_MINOR:
+		if (field->unit & 0xffffff00)		/* Not a length */
+			return 0;
+		unit_exponent += hid_snto32(field->unit >> 4, 4) - 1;
+		switch (field->unit & 0xf) {
+		case 0x1:				/* If centimeters */
 			/* Convert to millimeters */
 			unit_exponent += 1;
-		} else if (field->unit == 0x13) {	/* If inches */
+			break;
+		case 0x3:				/* If inches */
 			/* Convert to millimeters */
 			prev = physical_extents;
 			physical_extents *= 254;
 			if (physical_extents < prev)
 				return 0;
 			unit_exponent -= 1;
-		} else {
+			break;
+		default:
 			return 0;
 		}
 		break;
@@ -281,8 +292,9 @@ static __s32 hidinput_calc_abs_res(const struct hid_field *field, __u16 code)
 	}
 
 	/* Calculate resolution */
-	return logical_extents / physical_extents;
+	return DIV_ROUND_CLOSEST(logical_extents, physical_extents);
 }
+EXPORT_SYMBOL_GPL(hidinput_calc_abs_res);
 
 #ifdef CONFIG_HID_BATTERY_STRENGTH
 static enum power_supply_property hidinput_battery_props[] = {
@@ -298,6 +310,9 @@ static enum power_supply_property hidinput_battery_props[] = {
 #define HID_BATTERY_QUIRK_FEATURE	(1 << 1) /* ask for feature report */
 
 static const struct hid_device_id hid_battery_quirks[] = {
+	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE,
+			USB_DEVICE_ID_APPLE_ALU_WIRELESS_2009_ISO),
+	HID_BATTERY_QUIRK_PERCENT | HID_BATTERY_QUIRK_FEATURE },
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE,
 			       USB_DEVICE_ID_APPLE_ALU_WIRELESS_2011_ANSI),
 	  HID_BATTERY_QUIRK_PERCENT | HID_BATTERY_QUIRK_FEATURE },
@@ -502,9 +517,14 @@ static void hidinput_configure_usage(struct hid_input *hidinput, struct hid_fiel
 				if (code <= 0xf)
 					code += BTN_JOYSTICK;
 				else
-					code += BTN_TRIGGER_HAPPY;
+					code += BTN_TRIGGER_HAPPY - 0x10;
+				break;
+		case HID_GD_GAMEPAD:
+				if (code <= 0xf)
+					code += BTN_GAMEPAD;
+				else
+					code += BTN_TRIGGER_HAPPY - 0x10;
 				break;
-		case HID_GD_GAMEPAD:  code += BTN_GAMEPAD; break;
 		default:
 			switch (field->physical) {
 			case HID_GD_MOUSE:
@@ -1146,6 +1166,38 @@ static void report_features(struct hid_device *hid)
 			}
 }
 
+static struct hid_input *hidinput_allocate(struct hid_device *hid)
+{
+	struct hid_input *hidinput = kzalloc(sizeof(*hidinput), GFP_KERNEL);
+	struct input_dev *input_dev = input_allocate_device();
+	if (!hidinput || !input_dev) {
+		kfree(hidinput);
+		input_free_device(input_dev);
+		hid_err(hid, "Out of memory during hid input probe\n");
+		return NULL;
+	}
+
+	input_set_drvdata(input_dev, hid);
+	input_dev->event = hid->ll_driver->hidinput_input_event;
+	input_dev->open = hidinput_open;
+	input_dev->close = hidinput_close;
+	input_dev->setkeycode = hidinput_setkeycode;
+	input_dev->getkeycode = hidinput_getkeycode;
+
+	input_dev->name = hid->name;
+	input_dev->phys = hid->phys;
+	input_dev->uniq = hid->uniq;
+	input_dev->id.bustype = hid->bus;
+	input_dev->id.vendor  = hid->vendor;
+	input_dev->id.product = hid->product;
+	input_dev->id.version = hid->version;
+	input_dev->dev.parent = hid->dev.parent;
+	hidinput->input = input_dev;
+	list_add_tail(&hidinput->list, &hid->inputs);
+
+	return hidinput;
+}
+
 /*
  * Register the input device; print a message.
  * Configure the input layer interface
@@ -1157,7 +1209,6 @@ int hidinput_connect(struct hid_device *hid, unsigned int force)
 	struct hid_driver *drv = hid->driver;
 	struct hid_report *report;
 	struct hid_input *hidinput = NULL;
-	struct input_dev *input_dev;
 	int i, j, k;
 
 	INIT_LIST_HEAD(&hid->inputs);
@@ -1188,35 +1239,11 @@ int hidinput_connect(struct hid_device *hid, unsigned int force)
 				continue;
 
 			if (!hidinput) {
-				hidinput = kzalloc(sizeof(*hidinput), GFP_KERNEL);
-				input_dev = input_allocate_device();
-				if (!hidinput || !input_dev) {
-					kfree(hidinput);
-					input_free_device(input_dev);
-					hid_err(hid, "Out of memory during hid input probe\n");
+				hidinput = hidinput_allocate(hid);
+				if (!hidinput)
 					goto out_unwind;
 			}
 
-				input_set_drvdata(input_dev, hid);
-				input_dev->event =
-					hid->ll_driver->hidinput_input_event;
-				input_dev->open = hidinput_open;
-				input_dev->close = hidinput_close;
-				input_dev->setkeycode = hidinput_setkeycode;
-				input_dev->getkeycode = hidinput_getkeycode;
-
-				input_dev->name = hid->name;
-				input_dev->phys = hid->phys;
-				input_dev->uniq = hid->uniq;
-				input_dev->id.bustype = hid->bus;
-				input_dev->id.vendor  = hid->vendor;
-				input_dev->id.product = hid->product;
-				input_dev->id.version = hid->version;
-				input_dev->dev.parent = hid->dev.parent;
-				hidinput->input = input_dev;
-				list_add_tail(&hidinput->list, &hid->inputs);
-			}
-
 			for (i = 0; i < report->maxfield; i++)
 				for (j = 0; j < report->field[i]->maxusage; j++)
 					hidinput_configure_usage(hidinput, report->field[i],

drivers/hid/hid-multitouch.c

@@ -52,11 +52,14 @@ MODULE_LICENSE("GPL");
 #define MT_QUIRK_VALID_IS_CONFIDENCE	(1 << 6)
 #define MT_QUIRK_SLOT_IS_CONTACTID_MINUS_ONE	(1 << 8)
 #define MT_QUIRK_NO_AREA		(1 << 9)
+#define MT_QUIRK_IGNORE_DUPLICATES	(1 << 10)
+#define MT_QUIRK_HOVERING		(1 << 11)
 
 struct mt_slot {
-	__s32 x, y, p, w, h;
+	__s32 x, y, cx, cy, p, w, h;
 	__s32 contactid;	/* the device ContactID assigned to this slot */
 	bool touch_state;	/* is the touch valid? */
+	bool inrange_state;	/* is the finger in proximity of the sensor? */
 };
 
 struct mt_class {
@@ -121,6 +124,7 @@ struct mt_device {
 #define MT_CLS_GENERALTOUCH_PWT_TENFINGERS	0x0109
 
 #define MT_DEFAULT_MAXCONTACT	10
+#define MT_MAX_MAXCONTACT	250
 
 #define MT_USB_DEVICE(v, p)	HID_DEVICE(BUS_USB, HID_GROUP_MULTITOUCH, v, p)
 #define MT_BT_DEVICE(v, p)	HID_DEVICE(BUS_BLUETOOTH, HID_GROUP_MULTITOUCH, v, p)
@@ -282,11 +286,26 @@ static void mt_feature_mapping(struct hid_device *hdev,
 	case HID_DG_CONTACTMAX:
 		td->maxcontact_report_id = field->report->id;
 		td->maxcontacts = field->value[0];
+		if (!td->maxcontacts &&
+		    field->logical_maximum <= MT_MAX_MAXCONTACT)
+			td->maxcontacts = field->logical_maximum;
 		if (td->mtclass.maxcontacts)
 			/* check if the maxcontacts is given by the class */
 			td->maxcontacts = td->mtclass.maxcontacts;
 
 		break;
+	case 0xff0000c5:
+		if (field->report_count == 256 && field->report_size == 8) {
+			/* Win 8 devices need special quirks */
+			__s32 *quirks = &td->mtclass.quirks;
+			*quirks |= MT_QUIRK_ALWAYS_VALID;
+			*quirks |= MT_QUIRK_IGNORE_DUPLICATES;
+			*quirks |= MT_QUIRK_HOVERING;
+			*quirks &= ~MT_QUIRK_NOT_SEEN_MEANS_UP;
+			*quirks &= ~MT_QUIRK_VALID_IS_INRANGE;
+			*quirks &= ~MT_QUIRK_VALID_IS_CONFIDENCE;
+		}
+		break;
 	}
 }
 
@@ -297,6 +316,7 @@ static void set_abs(struct input_dev *input, unsigned int code,
 	int fmax = field->logical_maximum;
 	int fuzz = snratio ? (fmax - fmin) / snratio : 0;
 	input_set_abs_params(input, code, fmin, fmax, fuzz, 0);
+	input_abs_set_res(input, code, hidinput_calc_abs_res(field, code));
 }
 
 static void mt_store_field(struct hid_usage *usage, struct mt_device *td,
@@ -317,6 +337,7 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 	struct mt_device *td = hid_get_drvdata(hdev);
 	struct mt_class *cls = &td->mtclass;
 	int code;
+	struct hid_usage *prev_usage = NULL;
 
 	/* Only map fields from TouchScreen or TouchPad collections.
 	* We need to ignore fields that belong to other collections
@@ -339,23 +360,42 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 	if (field->physical == HID_DG_STYLUS)
 		return -1;
 
+	if (usage->usage_index)
+		prev_usage = &field->usage[usage->usage_index - 1];
+
 	switch (usage->hid & HID_USAGE_PAGE) {
 
 	case HID_UP_GENDESK:
 		switch (usage->hid) {
 		case HID_GD_X:
+			if (prev_usage && (prev_usage->hid == usage->hid)) {
+				hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_TOOL_X);
+				set_abs(hi->input, ABS_MT_TOOL_X, field,
+					cls->sn_move);
+			} else {
 				hid_map_usage(hi, usage, bit, max,
 					EV_ABS, ABS_MT_POSITION_X);
 				set_abs(hi->input, ABS_MT_POSITION_X, field,
 					cls->sn_move);
+			}
+
 			mt_store_field(usage, td, hi);
 			td->last_field_index = field->index;
 			return 1;
 		case HID_GD_Y:
+			if (prev_usage && (prev_usage->hid == usage->hid)) {
+				hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_TOOL_Y);
+				set_abs(hi->input, ABS_MT_TOOL_Y, field,
+					cls->sn_move);
+			} else {
 				hid_map_usage(hi, usage, bit, max,
 					EV_ABS, ABS_MT_POSITION_Y);
 				set_abs(hi->input, ABS_MT_POSITION_Y, field,
 					cls->sn_move);
+			}
+
 			mt_store_field(usage, td, hi);
 			td->last_field_index = field->index;
 			return 1;
@@ -365,6 +405,12 @@ static int mt_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 	case HID_UP_DIGITIZER:
 		switch (usage->hid) {
 		case HID_DG_INRANGE:
+			if (cls->quirks & MT_QUIRK_HOVERING) {
+				hid_map_usage(hi, usage, bit, max,
+					EV_ABS, ABS_MT_DISTANCE);
+				input_set_abs_params(hi->input,
+					ABS_MT_DISTANCE, 0, 1, 0, 0);
+			}
 			mt_store_field(usage, td, hi);
 			td->last_field_index = field->index;
 			return 1;
@@ -477,18 +523,26 @@ static int mt_compute_slot(struct mt_device *td, struct input_dev *input)
  */
 static void mt_complete_slot(struct mt_device *td, struct input_dev *input)
 {
-	if (td->curvalid) {
+	if (td->curvalid || (td->mtclass.quirks & MT_QUIRK_ALWAYS_VALID)) {
 		int slotnum = mt_compute_slot(td, input);
 		struct mt_slot *s = &td->curdata;
+		struct input_mt *mt = input->mt;
 
 		if (slotnum < 0 || slotnum >= td->maxcontacts)
 			return;
 
+		if ((td->mtclass.quirks & MT_QUIRK_IGNORE_DUPLICATES) && mt) {
+			struct input_mt_slot *slot = &mt->slots[slotnum];
+			if (input_mt_is_active(slot) &&
+			    input_mt_is_used(mt, slot))
+				return;
+		}
+
 		input_mt_slot(input, slotnum);
 		input_mt_report_slot_state(input, MT_TOOL_FINGER,
-			s->touch_state);
-		if (s->touch_state) {
-			/* this finger is on the screen */
+			s->touch_state || s->inrange_state);
+		if (s->touch_state || s->inrange_state) {
+			/* this finger is in proximity of the sensor */
 			int wide = (s->w > s->h);
 			/* divided by two to match visual scale of touch */
 			int major = max(s->w, s->h) >> 1;
@@ -496,6 +550,10 @@ static void mt_complete_slot(struct mt_device *td, struct input_dev *input)
 
 			input_event(input, EV_ABS, ABS_MT_POSITION_X, s->x);
 			input_event(input, EV_ABS, ABS_MT_POSITION_Y, s->y);
+			input_event(input, EV_ABS, ABS_MT_TOOL_X, s->cx);
+			input_event(input, EV_ABS, ABS_MT_TOOL_Y, s->cy);
+			input_event(input, EV_ABS, ABS_MT_DISTANCE,
+				!s->touch_state);
 			input_event(input, EV_ABS, ABS_MT_ORIENTATION, wide);
 			input_event(input, EV_ABS, ABS_MT_PRESSURE, s->p);
 			input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, major);
@@ -526,10 +584,10 @@ static int mt_event(struct hid_device *hid, struct hid_field *field,
 	if (hid->claimed & HID_CLAIMED_INPUT) {
 		switch (usage->hid) {
 		case HID_DG_INRANGE:
-			if (quirks & MT_QUIRK_ALWAYS_VALID)
-				td->curvalid = true;
-			else if (quirks & MT_QUIRK_VALID_IS_INRANGE)
+			if (quirks & MT_QUIRK_VALID_IS_INRANGE)
 				td->curvalid = value;
+			if (quirks & MT_QUIRK_HOVERING)
+				td->curdata.inrange_state = value;
 			break;
 		case HID_DG_TIPSWITCH:
 			if (quirks & MT_QUIRK_NOT_SEEN_MEANS_UP)
@@ -547,9 +605,15 @@ static int mt_event(struct hid_device *hid, struct hid_field *field,
 			td->curdata.p = value;
 			break;
 		case HID_GD_X:
+			if (usage->code == ABS_MT_TOOL_X)
+				td->curdata.cx = value;
+			else
 				td->curdata.x = value;
 			break;
 		case HID_GD_Y:
+			if (usage->code == ABS_MT_TOOL_Y)
+				td->curdata.cy = value;
+			else
 				td->curdata.y = value;
 			break;
 		case HID_DG_WIDTH:
@@ -575,12 +639,15 @@ static int mt_event(struct hid_device *hid, struct hid_field *field,
 			return 0;
 		}
 
+		if (usage->usage_index + 1 == field->report_count) {
+			/* we only take into account the last report. */
 			if (usage->hid == td->last_slot_field)
 				mt_complete_slot(td, field->hidinput->input);
 
 			if (field->index == td->last_field_index
 				&& td->num_received >= td->num_expected)
 				mt_sync_frame(td, field->hidinput->input);
+		}
 
 	}
 

drivers/hid/hid-roccat-isku.c

@@ -167,7 +167,7 @@ static ssize_t isku_sysfs_write_ ## thingy(struct file *fp, struct kobject *kobj
 		loff_t off, size_t count) \
 { \
 	return isku_sysfs_write(fp, kobj, buf, off, count, \
-			sizeof(struct isku_ ## thingy), ISKU_COMMAND_ ## THINGY); \
+			ISKU_SIZE_ ## THINGY, ISKU_COMMAND_ ## THINGY); \
 }
 
 #define ISKU_SYSFS_R(thingy, THINGY) \
@@ -176,32 +176,32 @@ static ssize_t isku_sysfs_read_ ## thingy(struct file *fp, struct kobject *kobj,
 		loff_t off, size_t count) \
 { \
 	return isku_sysfs_read(fp, kobj, buf, off, count, \
-			sizeof(struct isku_ ## thingy), ISKU_COMMAND_ ## THINGY); \
+			ISKU_SIZE_ ## THINGY, ISKU_COMMAND_ ## THINGY); \
 }
 
 #define ISKU_SYSFS_RW(thingy, THINGY) \
 ISKU_SYSFS_R(thingy, THINGY) \
 ISKU_SYSFS_W(thingy, THINGY)
 
-#define ISKU_BIN_ATTR_RW(thingy) \
+#define ISKU_BIN_ATTR_RW(thingy, THINGY) \
 { \
 	.attr = { .name = #thingy, .mode = 0660 }, \
-	.size = sizeof(struct isku_ ## thingy), \
+	.size = ISKU_SIZE_ ## THINGY, \
 	.read = isku_sysfs_read_ ## thingy, \
 	.write = isku_sysfs_write_ ## thingy \
 }
 
-#define ISKU_BIN_ATTR_R(thingy) \
+#define ISKU_BIN_ATTR_R(thingy, THINGY) \
 { \
 	.attr = { .name = #thingy, .mode = 0440 }, \
-	.size = sizeof(struct isku_ ## thingy), \
+	.size = ISKU_SIZE_ ## THINGY, \
 	.read = isku_sysfs_read_ ## thingy, \
 }
 
-#define ISKU_BIN_ATTR_W(thingy) \
+#define ISKU_BIN_ATTR_W(thingy, THINGY) \
 { \
 	.attr = { .name = #thingy, .mode = 0220 }, \
-	.size = sizeof(struct isku_ ## thingy), \
+	.size = ISKU_SIZE_ ## THINGY, \
 	.write = isku_sysfs_write_ ## thingy \
 }
 
@@ -218,21 +218,23 @@ ISKU_SYSFS_RW(last_set, LAST_SET)
 ISKU_SYSFS_W(talk, TALK)
 ISKU_SYSFS_R(info, INFO)
 ISKU_SYSFS_W(control, CONTROL)
+ISKU_SYSFS_W(reset, RESET)
 
 static struct bin_attribute isku_bin_attributes[] = {
-	ISKU_BIN_ATTR_RW(macro),
-	ISKU_BIN_ATTR_RW(keys_function),
-	ISKU_BIN_ATTR_RW(keys_easyzone),
-	ISKU_BIN_ATTR_RW(keys_media),
-	ISKU_BIN_ATTR_RW(keys_thumbster),
-	ISKU_BIN_ATTR_RW(keys_macro),
-	ISKU_BIN_ATTR_RW(keys_capslock),
-	ISKU_BIN_ATTR_RW(light),
-	ISKU_BIN_ATTR_RW(key_mask),
-	ISKU_BIN_ATTR_RW(last_set),
-	ISKU_BIN_ATTR_W(talk),
-	ISKU_BIN_ATTR_R(info),
-	ISKU_BIN_ATTR_W(control),
+	ISKU_BIN_ATTR_RW(macro, MACRO),
+	ISKU_BIN_ATTR_RW(keys_function, KEYS_FUNCTION),
+	ISKU_BIN_ATTR_RW(keys_easyzone, KEYS_EASYZONE),
+	ISKU_BIN_ATTR_RW(keys_media, KEYS_MEDIA),
+	ISKU_BIN_ATTR_RW(keys_thumbster, KEYS_THUMBSTER),
+	ISKU_BIN_ATTR_RW(keys_macro, KEYS_MACRO),
+	ISKU_BIN_ATTR_RW(keys_capslock, KEYS_CAPSLOCK),
+	ISKU_BIN_ATTR_RW(light, LIGHT),
+	ISKU_BIN_ATTR_RW(key_mask, KEY_MASK),
+	ISKU_BIN_ATTR_RW(last_set, LAST_SET),
+	ISKU_BIN_ATTR_W(talk, TALK),
+	ISKU_BIN_ATTR_R(info, INFO),
+	ISKU_BIN_ATTR_W(control, CONTROL),
+	ISKU_BIN_ATTR_W(reset, RESET),
 	__ATTR_NULL
 };
 

drivers/hid/hid-roccat-isku.h

@@ -14,77 +14,34 @@
 
 #include <linux/types.h>
 
+enum {
+	ISKU_SIZE_CONTROL = 0x03,
+	ISKU_SIZE_INFO = 0x06,
+	ISKU_SIZE_KEY_MASK = 0x06,
+	ISKU_SIZE_KEYS_FUNCTION = 0x29,
+	ISKU_SIZE_KEYS_EASYZONE = 0x41,
+	ISKU_SIZE_KEYS_MEDIA = 0x1d,
+	ISKU_SIZE_KEYS_THUMBSTER = 0x17,
+	ISKU_SIZE_KEYS_MACRO = 0x23,
+	ISKU_SIZE_KEYS_CAPSLOCK = 0x06,
+	ISKU_SIZE_LAST_SET = 0x14,
+	ISKU_SIZE_LIGHT = 0x0a,
+	ISKU_SIZE_MACRO = 0x823,
+	ISKU_SIZE_RESET = 0x03,
+	ISKU_SIZE_TALK = 0x10,
+};
+
 enum {
 	ISKU_PROFILE_NUM = 5,
 	ISKU_USB_INTERFACE_PROTOCOL = 0,
 };
 
-struct isku_control {
-	uint8_t command; /* ISKU_COMMAND_CONTROL */
-	uint8_t value;
-	uint8_t request;
-} __packed;
-
 struct isku_actual_profile {
 	uint8_t command; /* ISKU_COMMAND_ACTUAL_PROFILE */
 	uint8_t size; /* always 3 */
 	uint8_t actual_profile;
 } __packed;
 
-struct isku_key_mask {
-	uint8_t command; /* ISKU_COMMAND_KEY_MASK */
-	uint8_t size; /* 6 */
-	uint8_t profile_number; /* 0-4 */
-	uint8_t mask;
-	uint16_t checksum;
-} __packed;
-
-struct isku_keys_function {
-	uint8_t data[0x29];
-} __packed;
-
-struct isku_keys_easyzone {
-	uint8_t data[0x41];
-} __packed;
-
-struct isku_keys_media {
-	uint8_t data[0x1d];
-} __packed;
-
-struct isku_keys_thumbster {
-	uint8_t data[0x17];
-} __packed;
-
-struct isku_keys_macro {
-	uint8_t data[0x23];
-} __packed;
-
-struct isku_keys_capslock {
-	uint8_t data[0x6];
-} __packed;
-
-struct isku_macro {
-	uint8_t data[0x823];
-} __packed;
-
-struct isku_light {
-	uint8_t data[0xa];
-} __packed;
-
-struct isku_info {
-	uint8_t data[2];
-	uint8_t firmware_version;
-	uint8_t unknown[3];
-} __packed;
-
-struct isku_talk {
-	uint8_t data[0x10];
-} __packed;
-
-struct isku_last_set {
-	uint8_t data[0x14];
-} __packed;
-
 enum isku_commands {
 	ISKU_COMMAND_CONTROL = 0x4,
 	ISKU_COMMAND_ACTUAL_PROFILE = 0x5,
@@ -97,6 +54,7 @@ enum isku_commands {
 	ISKU_COMMAND_MACRO = 0xe,
 	ISKU_COMMAND_INFO = 0xf,
 	ISKU_COMMAND_LIGHT = 0x10,
+	ISKU_COMMAND_RESET = 0x11,
 	ISKU_COMMAND_KEYS_CAPSLOCK = 0x13,
 	ISKU_COMMAND_LAST_SET = 0x14,
 	ISKU_COMMAND_15 = 0x15,

drivers/hid/hid-roccat-koneplus.h

@@ -14,11 +14,19 @@
 
 #include <linux/types.h>
 
-struct koneplus_talk {
-	uint8_t command; /* KONEPLUS_COMMAND_TALK */
-	uint8_t size; /* always 0x10 */
-	uint8_t data[14];
-} __packed;
+enum {
+	KONEPLUS_SIZE_ACTUAL_PROFILE = 0x03,
+	KONEPLUS_SIZE_CONTROL = 0x03,
+	KONEPLUS_SIZE_FIRMWARE_WRITE = 0x0402,
+	KONEPLUS_SIZE_INFO = 0x06,
+	KONEPLUS_SIZE_MACRO = 0x0822,
+	KONEPLUS_SIZE_PROFILE_SETTINGS = 0x2b,
+	KONEPLUS_SIZE_PROFILE_BUTTONS = 0x4d,
+	KONEPLUS_SIZE_SENSOR = 0x06,
+	KONEPLUS_SIZE_TALK = 0x10,
+	KONEPLUS_SIZE_TCU = 0x04,
+	KONEPLUS_SIZE_TCU_IMAGE = 0x0404,
+};
 
 enum koneplus_control_requests {
 	KONEPLUS_CONTROL_REQUEST_PROFILE_SETTINGS = 0x80,
@@ -31,45 +39,6 @@ struct koneplus_actual_profile {
 	uint8_t actual_profile; /* Range 0-4! */
 } __attribute__ ((__packed__));
 
-struct koneplus_profile_settings {
-	uint8_t command; /* KONEPLUS_COMMAND_PROFILE_SETTINGS */
-	uint8_t size; /* always 43 */
-	uint8_t number; /* range 0-4 */
-	uint8_t advanced_sensitivity;
-	uint8_t sensitivity_x;
-	uint8_t sensitivity_y;
-	uint8_t cpi_levels_enabled;
-	uint8_t cpi_levels_x[5];
-	uint8_t cpi_startup_level; /* range 0-4 */
-	uint8_t cpi_levels_y[5]; /* range 1-60 means 100-6000 cpi */
-	uint8_t unknown1;
-	uint8_t polling_rate;
-	uint8_t lights_enabled;
-	uint8_t light_effect_mode;
-	uint8_t color_flow_effect;
-	uint8_t light_effect_type;
-	uint8_t light_effect_speed;
-	uint8_t lights[16];
-	uint16_t checksum;
-} __attribute__ ((__packed__));
-
-struct koneplus_profile_buttons {
-	uint8_t command; /* KONEPLUS_COMMAND_PROFILE_BUTTONS */
-	uint8_t size; /* always 77 */
-	uint8_t number; /* range 0-4 */
-	uint8_t data[72];
-	uint16_t checksum;
-} __attribute__ ((__packed__));
-
-struct koneplus_macro {
-	uint8_t command; /* KONEPLUS_COMMAND_MACRO */
-	uint16_t size; /* always 0x822 little endian */
-	uint8_t profile; /* range 0-4 */
-	uint8_t button; /* range 0-23 */
-	uint8_t data[2075];
-	uint16_t checksum;
-} __attribute__ ((__packed__));
-
 struct koneplus_info {
 	uint8_t command; /* KONEPLUS_COMMAND_INFO */
 	uint8_t size; /* always 6 */
@@ -77,51 +46,15 @@ struct koneplus_info {
 	uint8_t unknown[3];
 } __attribute__ ((__packed__));
 
-struct koneplus_e {
-	uint8_t command; /* KONEPLUS_COMMAND_E */
-	uint8_t size; /* always 3 */
-	uint8_t unknown; /* TODO 1; 0 before firmware update */
-} __attribute__ ((__packed__));
-
-struct koneplus_sensor {
-	uint8_t command;  /* KONEPLUS_COMMAND_SENSOR */
-	uint8_t size; /* always 6 */
-	uint8_t data[4];
-} __attribute__ ((__packed__));
-
-struct koneplus_firmware_write {
-	uint8_t command; /* KONEPLUS_COMMAND_FIRMWARE_WRITE */
-	uint8_t unknown[1025];
-} __attribute__ ((__packed__));
-
-struct koneplus_firmware_write_control {
-	uint8_t command; /* KONEPLUS_COMMAND_FIRMWARE_WRITE_CONTROL */
-	/*
-	 * value is 1 on success
-	 * 3 means "not finished yet"
-	 */
-	uint8_t value;
-	uint8_t unknown; /* always 0x75 */
-} __attribute__ ((__packed__));
-
-struct koneplus_tcu {
-	uint16_t usb_command; /* KONEPLUS_USB_COMMAND_TCU */
-	uint8_t data[2];
-} __attribute__ ((__packed__));
-
-struct koneplus_tcu_image {
-	uint16_t usb_command; /* KONEPLUS_USB_COMMAND_TCU */
-	uint8_t data[1024];
-	uint16_t checksum;
-} __attribute__ ((__packed__));
-
 enum koneplus_commands {
 	KONEPLUS_COMMAND_ACTUAL_PROFILE = 0x5,
+	KONEPLUS_COMMAND_CONTROL = 0x4,
 	KONEPLUS_COMMAND_PROFILE_SETTINGS = 0x6,
 	KONEPLUS_COMMAND_PROFILE_BUTTONS = 0x7,
 	KONEPLUS_COMMAND_MACRO = 0x8,
 	KONEPLUS_COMMAND_INFO = 0x9,
 	KONEPLUS_COMMAND_TCU = 0xc,
+	KONEPLUS_COMMAND_TCU_IMAGE = 0xc,
 	KONEPLUS_COMMAND_E = 0xe,
 	KONEPLUS_COMMAND_SENSOR = 0xf,
 	KONEPLUS_COMMAND_TALK = 0x10,
@@ -187,10 +120,6 @@ struct koneplus_device {
 	int chrdev_minor;
 
 	struct mutex koneplus_lock;
-
-	struct koneplus_info info;
-	struct koneplus_profile_settings profile_settings[5];
-	struct koneplus_profile_buttons profile_buttons[5];
 };
 
 #endif

drivers/hid/hid-roccat-kovaplus.h

@@ -14,6 +14,13 @@
 
 #include <linux/types.h>
 
+enum {
+	KOVAPLUS_SIZE_CONTROL = 0x03,
+	KOVAPLUS_SIZE_INFO = 0x06,
+	KOVAPLUS_SIZE_PROFILE_SETTINGS = 0x10,
+	KOVAPLUS_SIZE_PROFILE_BUTTONS = 0x17,
+};
+
 enum kovaplus_control_requests {
 	/* write; value = profile number range 0-4 */
 	KOVAPLUS_CONTROL_REQUEST_PROFILE_SETTINGS = 0x10,
@@ -53,15 +60,9 @@ struct kovaplus_info {
 	uint8_t unknown[3];
 } __packed;
 
-/* writes 1 on plugin */
-struct kovaplus_a {
-	uint8_t command; /* KOVAPLUS_COMMAND_A */
-	uint8_t size; /* 3 */
-	uint8_t unknown;
-} __packed;
-
 enum kovaplus_commands {
 	KOVAPLUS_COMMAND_ACTUAL_PROFILE = 0x5,
+	KOVAPLUS_COMMAND_CONTROL = 0x4,
 	KOVAPLUS_COMMAND_PROFILE_SETTINGS = 0x6,
 	KOVAPLUS_COMMAND_PROFILE_BUTTONS = 0x7,
 	KOVAPLUS_COMMAND_INFO = 0x9,
@@ -125,7 +126,6 @@ struct kovaplus_device {
 	int roccat_claimed;
 	int chrdev_minor;
 	struct mutex kovaplus_lock;
-	struct kovaplus_info info;
 	struct kovaplus_profile_settings profile_settings[5];
 	struct kovaplus_profile_buttons profile_buttons[5];
 };

drivers/hid/hid-roccat-lua.c

+/*
+ * Roccat Lua driver for Linux
+ *
+ * Copyright (c) 2012 Stefan Achatz <erazor_de@users.sourceforge.net>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+/*
+ * Roccat Lua is a gamer mouse which cpi, button and light settings can be
+ * configured.
+ */
+
+#include <linux/device.h>
+#include <linux/input.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/hid-roccat.h>
+#include "hid-ids.h"
+#include "hid-roccat-common.h"
+#include "hid-roccat-lua.h"
+
+static ssize_t lua_sysfs_read(struct file *fp, struct kobject *kobj,
+		char *buf, loff_t off, size_t count,
+		size_t real_size, uint command)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct lua_device *lua = hid_get_drvdata(dev_get_drvdata(dev));
+	struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev));
+	int retval;
+
+	if (off >= real_size)
+		return 0;
+
+	if (off != 0 || count != real_size)
+		return -EINVAL;
+
+	mutex_lock(&lua->lua_lock);
+	retval = roccat_common2_receive(usb_dev, command, buf, real_size);
+	mutex_unlock(&lua->lua_lock);
+
+	return retval ? retval : real_size;
+}
+
+static ssize_t lua_sysfs_write(struct file *fp, struct kobject *kobj,
+		void const *buf, loff_t off, size_t count,
+		size_t real_size, uint command)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct lua_device *lua = hid_get_drvdata(dev_get_drvdata(dev));
+	struct usb_device *usb_dev = interface_to_usbdev(to_usb_interface(dev));
+	int retval;
+
+	if (off != 0 || count != real_size)
+		return -EINVAL;
+
+	mutex_lock(&lua->lua_lock);
+	retval = roccat_common2_send(usb_dev, command, (void *)buf, real_size);
+	mutex_unlock(&lua->lua_lock);
+
+	return retval ? retval : real_size;
+}
+
+#define LUA_SYSFS_W(thingy, THINGY) \
+static ssize_t lua_sysfs_write_ ## thingy(struct file *fp, \
+		struct kobject *kobj, struct bin_attribute *attr, \
+		char *buf, loff_t off, size_t count) \
+{ \
+	return lua_sysfs_write(fp, kobj, buf, off, count, \
+			LUA_SIZE_ ## THINGY, LUA_COMMAND_ ## THINGY); \
+}
+
+#define LUA_SYSFS_R(thingy, THINGY) \
+static ssize_t lua_sysfs_read_ ## thingy(struct file *fp, \
+		struct kobject *kobj, struct bin_attribute *attr, \
+		char *buf, loff_t off, size_t count) \
+{ \
+	return lua_sysfs_read(fp, kobj, buf, off, count, \
+			LUA_SIZE_ ## THINGY, LUA_COMMAND_ ## THINGY); \
+}
+
+#define LUA_BIN_ATTRIBUTE_RW(thingy, THINGY) \
+LUA_SYSFS_W(thingy, THINGY) \
+LUA_SYSFS_R(thingy, THINGY) \
+static struct bin_attribute lua_ ## thingy ## _attr = { \
+	.attr = { .name = #thingy, .mode = 0660 }, \
+	.size = LUA_SIZE_ ## THINGY, \
+	.read = lua_sysfs_read_ ## thingy, \
+	.write = lua_sysfs_write_ ## thingy \
+};
+
+LUA_BIN_ATTRIBUTE_RW(control, CONTROL)
+
+static int lua_create_sysfs_attributes(struct usb_interface *intf)
+{
+	return sysfs_create_bin_file(&intf->dev.kobj, &lua_control_attr);
+}
+
+static void lua_remove_sysfs_attributes(struct usb_interface *intf)
+{
+	sysfs_remove_bin_file(&intf->dev.kobj, &lua_control_attr);
+}
+
+static int lua_init_lua_device_struct(struct usb_device *usb_dev,
+		struct lua_device *lua)
+{
+	mutex_init(&lua->lua_lock);
+
+	return 0;
+}
+
+static int lua_init_specials(struct hid_device *hdev)
+{
+	struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
+	struct usb_device *usb_dev = interface_to_usbdev(intf);
+	struct lua_device *lua;
+	int retval;
+
+	lua = kzalloc(sizeof(*lua), GFP_KERNEL);
+	if (!lua) {
+		hid_err(hdev, "can't alloc device descriptor\n");
+		return -ENOMEM;
+	}
+	hid_set_drvdata(hdev, lua);
+
+	retval = lua_init_lua_device_struct(usb_dev, lua);
+	if (retval) {
+		hid_err(hdev, "couldn't init struct lua_device\n");
+		goto exit;
+	}
+
+	retval = lua_create_sysfs_attributes(intf);
+	if (retval) {
+		hid_err(hdev, "cannot create sysfs files\n");
+		goto exit;
+	}
+
+	return 0;
+exit:
+	kfree(lua);
+	return retval;
+}
+
+static void lua_remove_specials(struct hid_device *hdev)
+{
+	struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
+	struct lua_device *lua;
+
+	lua_remove_sysfs_attributes(intf);
+
+	lua = hid_get_drvdata(hdev);
+	kfree(lua);
+}
+
+static int lua_probe(struct hid_device *hdev,
+		const struct hid_device_id *id)
+{
+	int retval;
+
+	retval = hid_parse(hdev);
+	if (retval) {
+		hid_err(hdev, "parse failed\n");
+		goto exit;
+	}
+
+	retval = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
+	if (retval) {
+		hid_err(hdev, "hw start failed\n");
+		goto exit;
+	}
+
+	retval = lua_init_specials(hdev);
+	if (retval) {
+		hid_err(hdev, "couldn't install mouse\n");
+		goto exit_stop;
+	}
+
+	return 0;
+
+exit_stop:
+	hid_hw_stop(hdev);
+exit:
+	return retval;
+}
+
+static void lua_remove(struct hid_device *hdev)
+{
+	lua_remove_specials(hdev);
+	hid_hw_stop(hdev);
+}
+
+static const struct hid_device_id lua_devices[] = {
+	{ HID_USB_DEVICE(USB_VENDOR_ID_ROCCAT, USB_DEVICE_ID_ROCCAT_LUA) },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(hid, lua_devices);
+
+static struct hid_driver lua_driver = {
+		.name = "lua",
+		.id_table = lua_devices,
+		.probe = lua_probe,
+		.remove = lua_remove
+};
+
+static int __init lua_init(void)
+{
+	return hid_register_driver(&lua_driver);
+}
+
+static void __exit lua_exit(void)
+{
+	hid_unregister_driver(&lua_driver);
+}
+
+module_init(lua_init);
+module_exit(lua_exit);
+
+MODULE_AUTHOR("Stefan Achatz");
+MODULE_DESCRIPTION("USB Roccat Lua driver");
+MODULE_LICENSE("GPL v2");

drivers/hid/hid-roccat-lua.h

+#ifndef __HID_ROCCAT_LUA_H
+#define __HID_ROCCAT_LUA_H
+
+/*
+ * Copyright (c) 2012 Stefan Achatz <erazor_de@users.sourceforge.net>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/types.h>
+
+enum {
+	LUA_SIZE_CONTROL = 8,
+};
+
+enum lua_commands {
+	LUA_COMMAND_CONTROL = 3,
+};
+
+struct lua_device {
+	struct mutex lua_lock;
+};
+
+#endif

drivers/hid/hid-roccat-pyra.h

@@ -14,11 +14,13 @@
 
 #include <linux/types.h>
 
-struct pyra_b {
-	uint8_t command; /* PYRA_COMMAND_B */
-	uint8_t size; /* always 3 */
-	uint8_t unknown; /* 1 */
-} __attribute__ ((__packed__));
+enum {
+	PYRA_SIZE_CONTROL = 0x03,
+	PYRA_SIZE_INFO = 0x06,
+	PYRA_SIZE_PROFILE_SETTINGS = 0x0d,
+	PYRA_SIZE_PROFILE_BUTTONS = 0x13,
+	PYRA_SIZE_SETTINGS = 0x03,
+};
 
 enum pyra_control_requests {
 	PYRA_CONTROL_REQUEST_PROFILE_SETTINGS = 0x10,
@@ -46,14 +48,6 @@ struct pyra_profile_settings {
 	uint16_t checksum; /* byte sum */
 } __attribute__ ((__packed__));
 
-struct pyra_profile_buttons {
-	uint8_t command; /* PYRA_COMMAND_PROFILE_BUTTONS */
-	uint8_t size; /* always 0x13 */
-	uint8_t number; /* Range 0-4 */
-	uint8_t buttons[14];
-	uint16_t checksum; /* byte sum */
-} __attribute__ ((__packed__));
-
 struct pyra_info {
 	uint8_t command; /* PYRA_COMMAND_INFO */
 	uint8_t size; /* always 6 */
@@ -64,6 +58,7 @@ struct pyra_info {
 } __attribute__ ((__packed__));
 
 enum pyra_commands {
+	PYRA_COMMAND_CONTROL = 0x4,
 	PYRA_COMMAND_SETTINGS = 0x5,
 	PYRA_COMMAND_PROFILE_SETTINGS = 0x6,
 	PYRA_COMMAND_PROFILE_BUTTONS = 0x7,
@@ -148,13 +143,10 @@ struct pyra_roccat_report {
 struct pyra_device {
 	int actual_profile;
 	int actual_cpi;
-	int firmware_version;
 	int roccat_claimed;
 	int chrdev_minor;
 	struct mutex pyra_lock;
-	struct pyra_settings settings;
 	struct pyra_profile_settings profile_settings[5];
-	struct pyra_profile_buttons profile_buttons[5];
 };
 
 #endif

drivers/hid/hid-roccat-savu.c

@@ -120,7 +120,7 @@ SAVU_SYSFS_RW(profile, PROFILE)
 SAVU_SYSFS_RW(general, GENERAL)
 SAVU_SYSFS_RW(buttons, BUTTONS)
 SAVU_SYSFS_RW(macro, MACRO)
-SAVU_SYSFS_R(info, INFO)
+SAVU_SYSFS_RW(info, INFO)
 SAVU_SYSFS_RW(sensor, SENSOR)
 
 static struct bin_attribute savu_bin_attributes[] = {
@@ -129,7 +129,7 @@ static struct bin_attribute savu_bin_attributes[] = {
 	SAVU_BIN_ATTRIBUTE_RW(general, GENERAL),
 	SAVU_BIN_ATTRIBUTE_RW(buttons, BUTTONS),
 	SAVU_BIN_ATTRIBUTE_RW(macro, MACRO),
-	SAVU_BIN_ATTRIBUTE_R(info, INFO),
+	SAVU_BIN_ATTRIBUTE_RW(info, INFO),
 	SAVU_BIN_ATTRIBUTE_RW(sensor, SENSOR),
 	__ATTR_NULL
 };

drivers/hid/hid-sensor-hub.c

@@ -82,23 +82,6 @@ struct hid_sensor_hub_callbacks_list {
 	void *priv;
 };
 
-static int sensor_hub_check_for_sensor_page(struct hid_device *hdev)
-{
-	int i;
-	int ret = -EINVAL;
-
-	for (i = 0; i < hdev->maxcollection; i++) {
-		struct hid_collection *col = &hdev->collection[i];
-		if (col->type == HID_COLLECTION_PHYSICAL &&
-		   (col->usage & HID_USAGE_PAGE) == HID_UP_SENSOR) {
-			ret = 0;
-			break;
-		}
-	}
-
-	return ret;
-}
-
 static struct hid_report *sensor_hub_report(int id, struct hid_device *hdev,
 						int dir)
 {
@@ -437,9 +420,6 @@ static int sensor_hub_raw_event(struct hid_device *hdev,
 	ptr = raw_data;
 	ptr++; /*Skip report id*/
 
-	if (!report)
-		goto err_report;
-
 	spin_lock_irqsave(&pdata->lock, flags);
 
 	for (i = 0; i < report->maxfield; ++i) {
@@ -485,7 +465,6 @@ static int sensor_hub_raw_event(struct hid_device *hdev,
 				callback->pdev);
 	spin_unlock_irqrestore(&pdata->lock, flags);
 
-err_report:
 	return 1;
 }
 
@@ -524,10 +503,6 @@ static int sensor_hub_probe(struct hid_device *hdev,
 		hid_err(hdev, "parse failed\n");
 		goto err_free;
 	}
-	if (sensor_hub_check_for_sensor_page(hdev) < 0) {
-		hid_err(hdev, "sensor page not found\n");
-		goto err_free;
-	}
 	INIT_LIST_HEAD(&hdev->inputs);
 
 	ret = hid_hw_start(hdev, 0);
@@ -630,16 +605,7 @@ static void sensor_hub_remove(struct hid_device *hdev)
 }
 
 static const struct hid_device_id sensor_hub_devices[] = {
-	{ HID_USB_DEVICE(USB_VENDOR_ID_INTEL_8086,
-			USB_DEVICE_ID_SENSOR_HUB_1020) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_INTEL_8087,
-			USB_DEVICE_ID_SENSOR_HUB_1020) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_INTEL_8086,
-			USB_DEVICE_ID_SENSOR_HUB_09FA) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_INTEL_8087,
-			USB_DEVICE_ID_SENSOR_HUB_09FA) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_STANTUM_STM,
-			USB_DEVICE_ID_SENSOR_HUB_7014) },
+	{ HID_DEVICE(BUS_USB, HID_GROUP_SENSOR_HUB, HID_ANY_ID, HID_ANY_ID) },
 	{ }
 };
 MODULE_DEVICE_TABLE(hid, sensor_hub_devices);

drivers/hid/hidraw.c

@@ -57,10 +57,6 @@ static ssize_t hidraw_read(struct file *file, char __user *buffer, size_t count,
 			set_current_state(TASK_INTERRUPTIBLE);
 
 			while (list->head == list->tail) {
-				if (file->f_flags & O_NONBLOCK) {
-					ret = -EAGAIN;
-					break;
-				}
 				if (signal_pending(current)) {
 					ret = -ERESTARTSYS;
 					break;
@@ -69,6 +65,10 @@ static ssize_t hidraw_read(struct file *file, char __user *buffer, size_t count,
 					ret = -EIO;
 					break;
 				}
+				if (file->f_flags & O_NONBLOCK) {
+					ret = -EAGAIN;
+					break;
+				}
 
 				/* allow O_NONBLOCK to work well from other threads */
 				mutex_unlock(&list->read_mutex);
@@ -295,6 +295,13 @@ static int hidraw_open(struct inode *inode, struct file *file)
 
 }
 
+static int hidraw_fasync(int fd, struct file *file, int on)
+{
+	struct hidraw_list *list = file->private_data;
+
+	return fasync_helper(fd, file, on, &list->fasync);
+}
+
 static int hidraw_release(struct inode * inode, struct file * file)
 {
 	unsigned int minor = iminor(inode);
@@ -438,6 +445,7 @@ static const struct file_operations hidraw_ops = {
 	.open =         hidraw_open,
 	.release =      hidraw_release,
 	.unlocked_ioctl = hidraw_ioctl,
+	.fasync =	hidraw_fasync,
 #ifdef CONFIG_COMPAT
 	.compat_ioctl   = hidraw_ioctl,
 #endif

drivers/hid/i2c-hid/Kconfig

+menu "I2C HID support"
+	depends on I2C
+
+config I2C_HID
+	tristate "HID over I2C transport layer"
+	default n
+	depends on I2C && INPUT
+	select HID
+	---help---
+	  Say Y here if you use a keyboard, a touchpad, a touchscreen, or any
+	  other HID based devices which is connected to your computer via I2C.
+
+	  If unsure, say N.
+
+	  This support is also available as a module.  If so, the module
+	  will be called i2c-hid.
+
+endmenu

drivers/hid/i2c-hid/Makefile

+#
+# Makefile for the I2C input drivers
+#
+
+obj-$(CONFIG_I2C_HID)				+= i2c-hid.o

drivers/hid/usbhid/hid-quirks.c

@@ -72,6 +72,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_FREESCALE, USB_DEVICE_ID_FREESCALE_MX28, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_MGE, USB_DEVICE_ID_MGE_UPS, HID_QUIRK_NOGET },
+	{ USB_VENDOR_ID_NOVATEK, USB_DEVICE_ID_NOVATEK_MOUSE, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN1, HID_QUIRK_NO_INIT_REPORTS },
 	{ USB_VENDOR_ID_PIXART, USB_DEVICE_ID_PIXART_OPTICAL_TOUCH_SCREEN2, HID_QUIRK_NO_INIT_REPORTS },
@@ -79,9 +80,11 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3001, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_QUANTA, USB_DEVICE_ID_QUANTA_OPTICAL_TOUCH_3008, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_SENNHEISER, USB_DEVICE_ID_SENNHEISER_BTD500USB, HID_QUIRK_NOGET },
+	{ USB_VENDOR_ID_SIGMATEL, USB_DEVICE_ID_SIGMATEL_STMP3780, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_SYMBOL, USB_DEVICE_ID_SYMBOL_SCANNER_1, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_SYMBOL, USB_DEVICE_ID_SYMBOL_SCANNER_2, HID_QUIRK_NOGET },
+	{ USB_VENDOR_ID_TPV, USB_DEVICE_ID_TPV_OPTICAL_TOUCHSCREEN, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_TURBOX, USB_DEVICE_ID_TURBOX_KEYBOARD, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_PF1209, HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_UCLOGIC, USB_DEVICE_ID_UCLOGIC_TABLET_WP4030U, HID_QUIRK_MULTI_INPUT },

drivers/hid/usbhid/hiddev.c

@@ -361,10 +361,6 @@ static ssize_t hiddev_read(struct file * file, char __user * buffer, size_t coun
 			prepare_to_wait(&list->hiddev->wait, &wait, TASK_INTERRUPTIBLE);
 
 			while (list->head == list->tail) {
-				if (file->f_flags & O_NONBLOCK) {
-					retval = -EAGAIN;
-					break;
-				}
 				if (signal_pending(current)) {
 					retval = -ERESTARTSYS;
 					break;
@@ -373,6 +369,10 @@ static ssize_t hiddev_read(struct file * file, char __user * buffer, size_t coun
 					retval = -EIO;
 					break;
 				}
+				if (file->f_flags & O_NONBLOCK) {
+					retval = -EAGAIN;
+					break;
+				}
 
 				/* let O_NONBLOCK tasks run */
 				mutex_unlock(&list->thread_lock);
@@ -625,7 +625,7 @@ static long hiddev_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 		break;
 
 	case HIDIOCAPPLICATION:
-		if (arg < 0 || arg >= hid->maxapplication)
+		if (arg >= hid->maxapplication)
 			break;
 
 		for (i = 0; i < hid->maxcollection; i++)

drivers/input/input-mt.c

@@ -251,7 +251,7 @@ void input_mt_sync_frame(struct input_dev *dev)
 
 	if (mt->flags & INPUT_MT_DROP_UNUSED) {
 		for (s = mt->slots; s != mt->slots + mt->num_slots; s++) {
-			if (s->frame == mt->frame)
+			if (input_mt_is_used(mt, s))
 				continue;
 			input_mt_slot(dev, s - mt->slots);
 			input_event(dev, EV_ABS, ABS_MT_TRACKING_ID, -1);

include/linux/hid-sensor-ids.h

@@ -19,7 +19,6 @@
 #ifndef _HID_SENSORS_IDS_H
 #define _HID_SENSORS_IDS_H
 
-#define HID_UP_SENSOR						0x00200000
 #define HID_MAX_PHY_DEVICES					0xFF
 
 /* Accel 3D (200073) */

include/linux/hid.h

@@ -167,6 +167,7 @@ struct hid_item {
 #define HID_UP_MSVENDOR		0xff000000
 #define HID_UP_CUSTOM		0x00ff0000
 #define HID_UP_LOGIVENDOR	0xffbc0000
+#define HID_UP_SENSOR		0x00200000
 
 #define HID_USAGE		0x0000ffff
 
@@ -292,6 +293,7 @@ struct hid_item {
  */
 #define HID_GROUP_GENERIC			0x0001
 #define HID_GROUP_MULTITOUCH			0x0002
+#define HID_GROUP_SENSOR_HUB			0x0003
 
 /*
  * This is the global environment of the parser. This information is
@@ -342,6 +344,7 @@ struct hid_collection {
 struct hid_usage {
 	unsigned  hid;			/* hid usage code */
 	unsigned  collection_index;	/* index into collection array */
+	unsigned  usage_index;		/* index into usage array */
 	/* hidinput data */
 	__u16     code;			/* input driver code */
 	__u8      type;			/* input driver type */
@@ -684,6 +687,7 @@ struct hid_ll_driver {
 
 extern int hid_debug;
 
+extern bool hid_ignore(struct hid_device *);
 extern int hid_add_device(struct hid_device *);
 extern void hid_destroy_device(struct hid_device *);
 
@@ -706,6 +710,7 @@ int hid_input_report(struct hid_device *, int type, u8 *, int, int);
 int hidinput_find_field(struct hid_device *hid, unsigned int type, unsigned int code, struct hid_field **field);
 struct hid_field *hidinput_get_led_field(struct hid_device *hid);
 unsigned int hidinput_count_leds(struct hid_device *hid);
+__s32 hidinput_calc_abs_res(const struct hid_field *field, __u16 code);
 void hid_output_report(struct hid_report *report, __u8 *data);
 struct hid_device *hid_allocate_device(void);
 struct hid_report *hid_register_report(struct hid_device *device, unsigned type, unsigned id);
@@ -716,6 +721,7 @@ int hid_connect(struct hid_device *hid, unsigned int connect_mask);
 void hid_disconnect(struct hid_device *hid);
 const struct hid_device_id *hid_match_id(struct hid_device *hdev,
 					 const struct hid_device_id *id);
+s32 hid_snto32(__u32 value, unsigned n);
 
 /**
  * hid_map_usage - map usage input bits

include/linux/i2c/i2c-hid.h

+/*
+ * HID over I2C protocol implementation
+ *
+ * Copyright (c) 2012 Benjamin Tissoires <benjamin.tissoires@gmail.com>
+ * Copyright (c) 2012 Ecole Nationale de l'Aviation Civile, France
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#ifndef __LINUX_I2C_HID_H
+#define __LINUX_I2C_HID_H
+
+#include <linux/types.h>
+
+/**
+ * struct i2chid_platform_data - used by hid over i2c implementation.
+ * @hid_descriptor_address: i2c register where the HID descriptor is stored.
+ *
+ * Note that it is the responsibility of the platform driver (or the acpi 5.0
+ * driver) to setup the irq related to the gpio in the struct i2c_board_info.
+ * The platform driver should also setup the gpio according to the device:
+ *
+ * A typical example is the following:
+ *	irq = gpio_to_irq(intr_gpio);
+ *	hkdk4412_i2c_devs5[0].irq = irq; // store the irq in i2c_board_info
+ *	gpio_request(intr_gpio, "elan-irq");
+ *	s3c_gpio_setpull(intr_gpio, S3C_GPIO_PULL_UP);
+ */
+struct i2c_hid_platform_data {
+	u16 hid_descriptor_address;
+};
+
+#endif /* __LINUX_I2C_HID_H */

include/linux/input/mt.h

@@ -69,6 +69,12 @@ static inline bool input_mt_is_active(const struct input_mt_slot *slot)
 	return input_mt_get_value(slot, ABS_MT_TRACKING_ID) >= 0;
 }
 
+static inline bool input_mt_is_used(const struct input_mt *mt,
+				    const struct input_mt_slot *slot)
+{
+	return slot->frame == mt->frame;
+}
+
 int input_mt_init_slots(struct input_dev *dev, unsigned int num_slots,
 			unsigned int flags);
 void input_mt_destroy_slots(struct input_dev *dev);

include/uapi/linux/input.h

@@ -851,6 +851,7 @@ struct input_keymap_entry {
 #define MSC_GESTURE		0x02
 #define MSC_RAW			0x03
 #define MSC_SCAN		0x04
+#define MSC_TIMESTAMP		0x05
 #define MSC_MAX			0x07
 #define MSC_CNT			(MSC_MAX+1)
 

net/bluetooth/hidp/core.c

@@ -945,6 +945,13 @@ static int hidp_setup_hid(struct hidp_session *session,
 	hid->hid_get_raw_report = hidp_get_raw_report;
 	hid->hid_output_raw_report = hidp_output_raw_report;
 
+	/* True if device is blacklisted in drivers/hid/hid-core.c */
+	if (hid_ignore(hid)) {
+		hid_destroy_device(session->hid);
+		session->hid = NULL;
+		return -ENODEV;
+	}
+
 	return 0;
 
 fault:
@@ -1017,7 +1024,7 @@ int hidp_add_connection(struct hidp_connadd_req *req, struct socket *ctrl_sock,
 
 	if (req->rd_size > 0) {
 		err = hidp_setup_hid(session, req);
-		if (err)
+		if (err && err != -ENODEV)
 			goto purge;
 	}