Commit fda052b0 authored by Mark Brown's avatar Mark Brown

Merge remote-tracking branches 'spi/topic/sirf', 'spi/topic/spidev' and...

Merge remote-tracking branches 'spi/topic/sirf', 'spi/topic/spidev' and 'spi/topic/zynq' into spi-next
* CSR SiRFprimaII Serial Peripheral Interface
Required properties:
- compatible : Should be "sirf,prima2-spi"
- compatible : Should be "sirf,prima2-spi", "sirf,prima2-usp"
or "sirf,atlas7-usp"
- reg : Offset and length of the register set for the device
- interrupts : Should contain SPI interrupt
- resets: phandle to the reset controller asserting this device in
......
Xilinx Zynq UltraScale+ MPSoC GQSPI controller Device Tree Bindings
-------------------------------------------------------------------
Required properties:
- compatible : Should be "xlnx,zynqmp-qspi-1.0".
- reg : Physical base address and size of GQSPI registers map.
- interrupts : Property with a value describing the interrupt
number.
- interrupt-parent : Must be core interrupt controller.
- clock-names : List of input clock names - "ref_clk", "pclk"
(See clock bindings for details).
- clocks : Clock phandles (see clock bindings for details).
Optional properties:
- num-cs : Number of chip selects used.
Example:
qspi: spi@ff0f0000 {
compatible = "xlnx,zynqmp-qspi-1.0";
clock-names = "ref_clk", "pclk";
clocks = <&misc_clk &misc_clk>;
interrupts = <0 15 4>;
interrupt-parent = <&gic>;
num-cs = <1>;
reg = <0x0 0xff0f0000 0x1000>,<0x0 0xc0000000 0x8000000>;
};
......@@ -610,6 +610,12 @@ config SPI_XTENSA_XTFPGA
16 bit words in SPI mode 0, automatically asserting CS on transfer
start and deasserting on end.
config SPI_ZYNQMP_GQSPI
tristate "Xilinx ZynqMP GQSPI controller"
depends on SPI_MASTER
help
Enables Xilinx GQSPI controller driver for Zynq UltraScale+ MPSoC.
config SPI_NUC900
tristate "Nuvoton NUC900 series SPI"
depends on ARCH_W90X900
......
......@@ -89,3 +89,4 @@ obj-$(CONFIG_SPI_TXX9) += spi-txx9.o
obj-$(CONFIG_SPI_XCOMM) += spi-xcomm.o
obj-$(CONFIG_SPI_XILINX) += spi-xilinx.o
obj-$(CONFIG_SPI_XTENSA_XTFPGA) += spi-xtensa-xtfpga.o
obj-$(CONFIG_SPI_ZYNQMP_GQSPI) += spi-zynqmp-gqspi.o
This diff is collapsed.
This diff is collapsed.
......@@ -95,37 +95,25 @@ MODULE_PARM_DESC(bufsiz, "data bytes in biggest supported SPI message");
/*-------------------------------------------------------------------------*/
/*
* We can't use the standard synchronous wrappers for file I/O; we
* need to protect against async removal of the underlying spi_device.
*/
static void spidev_complete(void *arg)
{
complete(arg);
}
static ssize_t
spidev_sync(struct spidev_data *spidev, struct spi_message *message)
{
DECLARE_COMPLETION_ONSTACK(done);
int status;
message->complete = spidev_complete;
message->context = &done;
struct spi_device *spi;
spin_lock_irq(&spidev->spi_lock);
if (spidev->spi == NULL)
spi = spidev->spi;
spin_unlock_irq(&spidev->spi_lock);
if (spi == NULL)
status = -ESHUTDOWN;
else
status = spi_async(spidev->spi, message);
spin_unlock_irq(&spidev->spi_lock);
status = spi_sync(spi, message);
if (status == 0) {
wait_for_completion(&done);
status = message->status;
if (status == 0)
status = message->actual_length;
}
return status;
}
......@@ -647,7 +635,6 @@ static int spidev_open(struct inode *inode, struct file *filp)
static int spidev_release(struct inode *inode, struct file *filp)
{
struct spidev_data *spidev;
int status = 0;
mutex_lock(&device_list_lock);
spidev = filp->private_data;
......@@ -676,7 +663,7 @@ static int spidev_release(struct inode *inode, struct file *filp)
}
mutex_unlock(&device_list_lock);
return status;
return 0;
}
static const struct file_operations spidev_fops = {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment