Commit fe55e770 authored by Michael Nosthoff's avatar Michael Nosthoff Committed by Sebastian Reichel

power: supply: sbs-battery: only return health when battery present

when the battery is set to sbs-mode and  no gpio detection is enabled
"health" is always returning a value even when the battery is not present.
All other fields return "not present".
This leads to a scenario where the driver is constantly switching between
"present" and "not present" state. This generates a lot of constant
traffic on the i2c.

This commit changes the response of "health" to an error when the battery
is not responding leading to a consistent "not present" state.

Fixes: 76b16f4c ("power: supply: sbs-battery: don't assume MANUFACTURER_DATA formats")
Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarMichael Nosthoff <committed@heine.so>
Reviewed-by: default avatarBrian Norris <briannorris@chromium.org>
Tested-by: default avatarBrian Norris <briannorris@chromium.org>
Signed-off-by: default avatarSebastian Reichel <sebastian.reichel@collabora.com>
parent 47c169e1
......@@ -314,17 +314,22 @@ static int sbs_get_battery_presence_and_health(
{
int ret;
if (psp == POWER_SUPPLY_PROP_PRESENT) {
/* Dummy command; if it succeeds, battery is present. */
ret = sbs_read_word_data(client, sbs_data[REG_STATUS].addr);
if (ret < 0)
val->intval = 0; /* battery disconnected */
else
if (ret < 0) { /* battery not present*/
if (psp == POWER_SUPPLY_PROP_PRESENT) {
val->intval = 0;
return 0;
}
return ret;
}
if (psp == POWER_SUPPLY_PROP_PRESENT)
val->intval = 1; /* battery present */
} else { /* POWER_SUPPLY_PROP_HEALTH */
else /* POWER_SUPPLY_PROP_HEALTH */
/* SBS spec doesn't have a general health command. */
val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
}
return 0;
}
......@@ -626,6 +631,8 @@ static int sbs_get_property(struct power_supply *psy,
else
ret = sbs_get_battery_presence_and_health(client, psp,
val);
/* this can only be true if no gpio is used */
if (psp == POWER_SUPPLY_PROP_PRESENT)
return 0;
break;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment