Commit feeedc6c authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  i2c: Add info->archdata field
  i2c: Inform about deprecated chips directory
  i2c: Use pci_ioremap_bar()
  Schedule removal of the legacy i2c device driver binding model
  i2c: Clean up <linux/i2c.h>
  i2c: Update and clean up writing-clients document
  i2c: Drop 2-byte address block transfer defines
  i2c: Delete legacy model documentation
  i2c: Constify i2c_get_clientdata's parameter
  i2c: Delete outdated client porting guide
  i2c: Make clear what the class field of i2c_adapter is good for
  i2c-algo-pcf: Fix typo in debugging log message
  i2c-algo-pcf: Add adapter hooks around xfer begin and end
  i2c-algo-pcf: Pass adapter data into ->waitforpin() method
  i2c-i801: Add support for Intel Ibex Peak
parents a2702834 11f1f2af
......@@ -359,3 +359,11 @@ Why: The 2.6 kernel supports direct writing to ide CD drives, which
eliminates the need for ide-scsi. The new method is more
efficient in every way.
Who: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
---------------------------
What: i2c_attach_client(), i2c_detach_client(), i2c_driver->detach_client()
When: 2.6.29 (ideally) or 2.6.30 (more likely)
Why: Deprecated by the new (standard) device driver binding model. Use
i2c_driver->probe() and ->remove() instead.
Who: Jean Delvare <khali@linux-fr.org>
......@@ -13,8 +13,9 @@ Supported adapters:
* Intel 631xESB/632xESB (ESB2)
* Intel 82801H (ICH8)
* Intel 82801I (ICH9)
* Intel Tolapai
* Intel ICH10
* Intel EP80579 (Tolapai)
* Intel 82801JI (ICH10)
* Intel PCH
Datasheets: Publicly available at the Intel website
Authors:
......@@ -32,7 +33,7 @@ Description
-----------
The ICH (properly known as the 82801AA), ICH0 (82801AB), ICH2 (82801BA),
ICH3 (82801CA/CAM) and later devices are Intel chips that are a part of
ICH3 (82801CA/CAM) and later devices (PCH) are Intel chips that are a part of
Intel's '810' chipset for Celeron-based PCs, '810E' chipset for
Pentium-based PCs, '815E' chipset, and others.
......
Revision 7, 2007-04-19
Jean Delvare <khali@linux-fr.org>
Greg KH <greg@kroah.com>
This is a guide on how to convert I2C chip drivers from Linux 2.4 to
Linux 2.6. I have been using existing drivers (lm75, lm78) as examples.
Then I converted a driver myself (lm83) and updated this document.
Note that this guide is strongly oriented towards hardware monitoring
drivers. Many points are still valid for other type of drivers, but
others may be irrelevant.
There are two sets of points below. The first set concerns technical
changes. The second set concerns coding policy. Both are mandatory.
Although reading this guide will help you porting drivers, I suggest
you keep an eye on an already ported driver while porting your own
driver. This will help you a lot understanding what this guide
exactly means. Choose the chip driver that is the more similar to
yours for best results.
Technical changes:
* [Driver type] Any driver that was relying on i2c-isa has to be
converted to a proper isa, platform or pci driver. This is not
covered by this guide.
* [Includes] Get rid of "version.h" and <linux/i2c-proc.h>.
Includes typically look like that:
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/jiffies.h>
#include <linux/i2c.h>
#include <linux/hwmon.h> /* for hardware monitoring drivers */
#include <linux/hwmon-sysfs.h>
#include <linux/hwmon-vid.h> /* if you need VRM support */
#include <linux/err.h> /* for class registration */
Please respect this inclusion order. Some extra headers may be
required for a given driver (e.g. "lm75.h").
* [Addresses] SENSORS_I2C_END becomes I2C_CLIENT_END, ISA addresses
are no more handled by the i2c core. Address ranges are no more
supported either, define each individual address separately.
SENSORS_INSMOD_<n> becomes I2C_CLIENT_INSMOD_<n>.
* [Client data] Get rid of sysctl_id. Try using standard names for
register values (for example, temp_os becomes temp_max). You're
still relatively free here, but you *have* to follow the standard
names for sysfs files (see the Sysctl section below).
* [Function prototypes] The detect functions loses its flags
parameter. Sysctl (e.g. lm75_temp) and miscellaneous functions
are off the list of prototypes. This usually leaves five
prototypes:
static int lm75_attach_adapter(struct i2c_adapter *adapter);
static int lm75_detect(struct i2c_adapter *adapter, int address,
int kind);
static void lm75_init_client(struct i2c_client *client);
static int lm75_detach_client(struct i2c_client *client);
static struct lm75_data lm75_update_device(struct device *dev);
* [Sysctl] All sysctl stuff is of course gone (defines, ctl_table
and functions). Instead, you have to define show and set functions for
each sysfs file. Only define set for writable values. Take a look at an
existing 2.6 driver for details (it87 for example). Don't forget
to define the attributes for each file (this is that step that
links callback functions). Use the file names specified in
Documentation/hwmon/sysfs-interface for the individual files. Also
convert the units these files read and write to the specified ones.
If you need to add a new type of file, please discuss it on the
sensors mailing list <lm-sensors@lm-sensors.org> by providing a
patch to the Documentation/hwmon/sysfs-interface file.
* [Attach] The attach function should make sure that the adapter's
class has I2C_CLASS_HWMON (or whatever class is suitable for your
driver), using the following construct:
if (!(adapter->class & I2C_CLASS_HWMON))
return 0;
Call i2c_probe() instead of i2c_detect().
* [Detect] As mentioned earlier, the flags parameter is gone.
The type_name and client_name strings are replaced by a single
name string, which will be filled with a lowercase, short string.
The labels used for error paths are reduced to the number needed.
It is advised that the labels are given descriptive names such as
exit and exit_free. Don't forget to properly set err before
jumping to error labels. By the way, labels should be left-aligned.
Use kzalloc instead of kmalloc.
Use i2c_set_clientdata to set the client data (as opposed to
a direct access to client->data).
Use strlcpy instead of strcpy or snprintf to copy the client name.
Replace the sysctl directory registration by calls to
device_create_file. Move the driver initialization before any
sysfs file creation.
Register the client with the hwmon class (using hwmon_device_register)
if applicable.
Drop client->id.
Drop any 24RF08 corruption prevention you find, as this is now done
at the i2c-core level, and doing it twice voids it.
Don't add I2C_CLIENT_ALLOW_USE to client->flags, it's the default now.
* [Init] Limits must not be set by the driver (can be done later in
user-space). Chip should not be reset default (although a module
parameter may be used to force it), and initialization should be
limited to the strictly necessary steps.
* [Detach] Remove the call to i2c_deregister_entry. Do not log an
error message if i2c_detach_client fails, as i2c-core will now do
it for you.
Unregister from the hwmon class if applicable.
* [Update] The function prototype changed, it is now
passed a device structure, which you have to convert to a client
using to_i2c_client(dev). The update function should return a
pointer to the client data.
Don't access client->data directly, use i2c_get_clientdata(client)
instead.
Use time_after() instead of direct jiffies comparison.
* [Interface] Make sure there is a MODULE_LICENSE() line, at the bottom
of the file (after MODULE_AUTHOR() and MODULE_DESCRIPTION(), in this
order).
* [Driver] The flags field of the i2c_driver structure is gone.
I2C_DF_NOTIFY is now the default behavior.
The i2c_driver structure has a driver member, which is itself a
structure, those name member should be initialized to a driver name
string. i2c_driver itself has no name member anymore.
* [Driver model] Instead of shutdown or reboot notifiers, provide a
shutdown() method in your driver.
* [Power management] Use the driver model suspend() and resume()
callbacks instead of the obsolete pm_register() calls.
Coding policy:
* [Copyright] Use (C), not (c), for copyright.
* [Debug/log] Get rid of #ifdef DEBUG/#endif constructs whenever you
can. Calls to printk for debugging purposes are replaced by calls to
dev_dbg where possible, else to pr_debug. Here is an example of how
to call it (taken from lm75_detect):
dev_dbg(&client->dev, "Starting lm75 update\n");
Replace other printk calls with the dev_info, dev_err or dev_warn
function, as appropriate.
* [Constants] Constants defines (registers, conversions) should be
aligned. This greatly improves readability.
Alignments are achieved by the means of tabs, not spaces. Remember
that tabs are set to 8 in the Linux kernel code.
* [Layout] Avoid extra empty lines between comments and what they
comment. Respect the coding style (see Documentation/CodingStyle),
in particular when it comes to placing curly braces.
* [Comments] Make sure that no comment refers to a file that isn't
part of the Linux source tree (typically doc/chips/<chip name>),
and that remaining comments still match the code. Merging comment
lines when possible is encouraged.
......@@ -13,7 +13,7 @@ Try to keep the kernel namespace as clean as possible. The best way to
do this is to use a unique prefix for all global symbols. This is
especially important for exported symbols, but it is a good idea to do
it for non-exported symbols too. We will use the prefix `foo_' in this
tutorial, and `FOO_' for preprocessor variables.
tutorial.
The driver structure
......@@ -25,8 +25,6 @@ routines, and should be zero-initialized except for fields with data you
provide. A client structure holds device-specific information like the
driver model device node, and its I2C address.
/* iff driver uses driver model ("new style") binding model: */
static struct i2c_device_id foo_idtable[] = {
{ "foo", my_id_for_foo },
{ "bar", my_id_for_bar },
......@@ -40,7 +38,6 @@ static struct i2c_driver foo_driver = {
.name = "foo",
},
/* iff driver uses driver model ("new style") binding model: */
.id_table = foo_ids,
.probe = foo_probe,
.remove = foo_remove,
......@@ -49,15 +46,10 @@ static struct i2c_driver foo_driver = {
.detect = foo_detect,
.address_data = &addr_data,
/* else, driver uses "legacy" binding model: */
.attach_adapter = foo_attach_adapter,
.detach_client = foo_detach_client,
/* these may be used regardless of the driver binding model */
.shutdown = foo_shutdown, /* optional */
.suspend = foo_suspend, /* optional */
.resume = foo_resume, /* optional */
.command = foo_command, /* optional */
.command = foo_command, /* optional, deprecated */
}
The name field is the driver name, and must not contain spaces. It
......@@ -74,34 +66,13 @@ Extra client data
=================
Each client structure has a special `data' field that can point to any
structure at all. You should use this to keep device-specific data,
especially in drivers that handle multiple I2C or SMBUS devices. You
do not always need this, but especially for `sensors' drivers, it can
be very useful.
structure at all. You should use this to keep device-specific data.
/* store the value */
void i2c_set_clientdata(struct i2c_client *client, void *data);
/* retrieve the value */
void *i2c_get_clientdata(struct i2c_client *client);
An example structure is below.
struct foo_data {
struct i2c_client client;
enum chips type; /* To keep the chips type for `sensors' drivers. */
/* Because the i2c bus is slow, it is often useful to cache the read
information of a chip for some time (for example, 1 or 2 seconds).
It depends of course on the device whether this is really worthwhile
or even sensible. */
struct mutex update_lock; /* When we are reading lots of information,
another process should not update the
below information */
char valid; /* != 0 if the following fields are valid. */
unsigned long last_updated; /* In jiffies */
/* Add the read information here too */
};
void *i2c_get_clientdata(const struct i2c_client *client);
Accessing the client
......@@ -109,11 +80,9 @@ Accessing the client
Let's say we have a valid client structure. At some time, we will need
to gather information from the client, or write new information to the
client. How we will export this information to user-space is less
important at this moment (perhaps we do not need to do this at all for
some obscure clients). But we need generic reading and writing routines.
client.
I have found it useful to define foo_read and foo_write function for this.
I have found it useful to define foo_read and foo_write functions for this.
For some cases, it will be easier to call the i2c functions directly,
but many chips have some kind of register-value idea that can easily
be encapsulated.
......@@ -121,33 +90,33 @@ be encapsulated.
The below functions are simple examples, and should not be copied
literally.
int foo_read_value(struct i2c_client *client, u8 reg)
{
int foo_read_value(struct i2c_client *client, u8 reg)
{
if (reg < 0x10) /* byte-sized register */
return i2c_smbus_read_byte_data(client,reg);
return i2c_smbus_read_byte_data(client, reg);
else /* word-sized register */
return i2c_smbus_read_word_data(client,reg);
}
return i2c_smbus_read_word_data(client, reg);
}
int foo_write_value(struct i2c_client *client, u8 reg, u16 value)
{
if (reg == 0x10) /* Impossible to write - driver error! */ {
return -1;
int foo_write_value(struct i2c_client *client, u8 reg, u16 value)
{
if (reg == 0x10) /* Impossible to write - driver error! */
return -EINVAL;
else if (reg < 0x10) /* byte-sized register */
return i2c_smbus_write_byte_data(client,reg,value);
return i2c_smbus_write_byte_data(client, reg, value);
else /* word-sized register */
return i2c_smbus_write_word_data(client,reg,value);
}
return i2c_smbus_write_word_data(client, reg, value);
}
Probing and attaching
=====================
The Linux I2C stack was originally written to support access to hardware
monitoring chips on PC motherboards, and thus it embeds some assumptions
that are more appropriate to SMBus (and PCs) than to I2C. One of these
assumptions is that most adapters and devices drivers support the SMBUS_QUICK
protocol to probe device presence. Another is that devices and their drivers
monitoring chips on PC motherboards, and thus used to embed some assumptions
that were more appropriate to SMBus (and PCs) than to I2C. One of these
assumptions was that most adapters and devices drivers support the SMBUS_QUICK
protocol to probe device presence. Another was that devices and their drivers
can be sufficiently configured using only such probe primitives.
As Linux and its I2C stack became more widely used in embedded systems
......@@ -164,6 +133,9 @@ since the "legacy" model requires drivers to create "i2c_client" device
objects after SMBus style probing, while the Linux driver model expects
drivers to be given such device objects in their probe() routines.
The legacy model is deprecated now and will soon be removed, so we no
longer document it here.
Standard Driver Model Binding ("New Style")
-------------------------------------------
......@@ -193,8 +165,8 @@ matches the device's name. It is passed the entry that was matched so
the driver knows which one in the table matched.
Device Creation (Standard driver model)
---------------------------------------
Device Creation
---------------
If you know for a fact that an I2C device is connected to a given I2C bus,
you can instantiate that device by simply filling an i2c_board_info
......@@ -221,8 +193,8 @@ in the I2C bus driver. You may want to save the returned i2c_client
reference for later use.
Device Detection (Standard driver model)
----------------------------------------
Device Detection
----------------
Sometimes you do not know in advance which I2C devices are connected to
a given I2C bus. This is for example the case of hardware monitoring
......@@ -246,8 +218,8 @@ otherwise misdetections are likely to occur and things can get wrong
quickly.
Device Deletion (Standard driver model)
---------------------------------------
Device Deletion
---------------
Each I2C device which has been created using i2c_new_device() or
i2c_new_probed_device() can be unregistered by calling
......@@ -256,264 +228,37 @@ called automatically before the underlying I2C bus itself is removed, as a
device can't survive its parent in the device driver model.
Legacy Driver Binding Model
---------------------------
Initializing the driver
=======================
Most i2c devices can be present on several i2c addresses; for some this
is determined in hardware (by soldering some chip pins to Vcc or Ground),
for others this can be changed in software (by writing to specific client
registers). Some devices are usually on a specific address, but not always;
and some are even more tricky. So you will probably need to scan several
i2c addresses for your clients, and do some sort of detection to see
whether it is actually a device supported by your driver.
When the kernel is booted, or when your foo driver module is inserted,
you have to do some initializing. Fortunately, just registering the
driver module is usually enough.
To give the user a maximum of possibilities, some default module parameters
are defined to help determine what addresses are scanned. Several macros
are defined in i2c.h to help you support them, as well as a generic
detection algorithm.
You do not have to use this parameter interface; but don't try to use
function i2c_probe() if you don't.
Probing classes (Legacy model)
------------------------------
All parameters are given as lists of unsigned 16-bit integers. Lists are
terminated by I2C_CLIENT_END.
The following lists are used internally:
normal_i2c: filled in by the module writer.
A list of I2C addresses which should normally be examined.
probe: insmod parameter.
A list of pairs. The first value is a bus number (-1 for any I2C bus),
the second is the address. These addresses are also probed, as if they
were in the 'normal' list.
ignore: insmod parameter.
A list of pairs. The first value is a bus number (-1 for any I2C bus),
the second is the I2C address. These addresses are never probed.
This parameter overrules the 'normal_i2c' list only.
force: insmod parameter.
A list of pairs. The first value is a bus number (-1 for any I2C bus),
the second is the I2C address. A device is blindly assumed to be on
the given address, no probing is done.
Additionally, kind-specific force lists may optionally be defined if
the driver supports several chip kinds. They are grouped in a
NULL-terminated list of pointers named forces, those first element if the
generic force list mentioned above. Each additional list correspond to an
insmod parameter of the form force_<kind>.
Fortunately, as a module writer, you just have to define the `normal_i2c'
parameter. The complete declaration could look like this:
/* Scan 0x4c to 0x4f */
static const unsigned short normal_i2c[] = { 0x4c, 0x4d, 0x4e, 0x4f,
I2C_CLIENT_END };
/* Magic definition of all other variables and things */
I2C_CLIENT_INSMOD;
/* Or, if your driver supports, say, 2 kind of devices: */
I2C_CLIENT_INSMOD_2(foo, bar);
If you use the multi-kind form, an enum will be defined for you:
enum chips { any_chip, foo, bar, ... }
You can then (and certainly should) use it in the driver code.
Note that you *have* to call the defined variable `normal_i2c',
without any prefix!
Attaching to an adapter (Legacy model)
--------------------------------------
Whenever a new adapter is inserted, or for all adapters if the driver is
being registered, the callback attach_adapter() is called. Now is the
time to determine what devices are present on the adapter, and to register
a client for each of them.
The attach_adapter callback is really easy: we just call the generic
detection function. This function will scan the bus for us, using the
information as defined in the lists explained above. If a device is
detected at a specific address, another callback is called.
int foo_attach_adapter(struct i2c_adapter *adapter)
{
return i2c_probe(adapter,&addr_data,&foo_detect_client);
}
Remember, structure `addr_data' is defined by the macros explained above,
so you do not have to define it yourself.
The i2c_probe function will call the foo_detect_client
function only for those i2c addresses that actually have a device on
them (unless a `force' parameter was used). In addition, addresses that
are already in use (by some other registered client) are skipped.
The detect client function (Legacy model)
-----------------------------------------
The detect client function is called by i2c_probe. The `kind' parameter
contains -1 for a probed detection, 0 for a forced detection, or a positive
number for a forced detection with a chip type forced.
Returning an error different from -ENODEV in a detect function will cause
the detection to stop: other addresses and adapters won't be scanned.
This should only be done on fatal or internal errors, such as a memory
shortage or i2c_attach_client failing.
For now, you can ignore the `flags' parameter. It is there for future use.
int foo_detect_client(struct i2c_adapter *adapter, int address,
int kind)
{
int err = 0;
int i;
struct i2c_client *client;
struct foo_data *data;
const char *name = "";
/* Let's see whether this adapter can support what we need.
Please substitute the things you need here! */
if (!i2c_check_functionality(adapter,I2C_FUNC_SMBUS_WORD_DATA |
I2C_FUNC_SMBUS_WRITE_BYTE))
goto ERROR0;
/* OK. For now, we presume we have a valid client. We now create the
client structure, even though we cannot fill it completely yet.
But it allows us to access several i2c functions safely */
if (!(data = kzalloc(sizeof(struct foo_data), GFP_KERNEL))) {
err = -ENOMEM;
goto ERROR0;
}
client = &data->client;
i2c_set_clientdata(client, data);
client->addr = address;
client->adapter = adapter;
client->driver = &foo_driver;
/* Now, we do the remaining detection. If no `force' parameter is used. */
/* First, the generic detection (if any), that is skipped if any force
parameter was used. */
if (kind < 0) {
/* The below is of course bogus */
if (foo_read(client, FOO_REG_GENERIC) != FOO_GENERIC_VALUE)
goto ERROR1;
}
/* Next, specific detection. This is especially important for `sensors'
devices. */
/* Determine the chip type. Not needed if a `force_CHIPTYPE' parameter
was used. */
if (kind <= 0) {
i = foo_read(client, FOO_REG_CHIPTYPE);
if (i == FOO_TYPE_1)
kind = chip1; /* As defined in the enum */
else if (i == FOO_TYPE_2)
kind = chip2;
else {
printk("foo: Ignoring 'force' parameter for unknown chip at "
"adapter %d, address 0x%02x\n",i2c_adapter_id(adapter),address);
goto ERROR1;
}
}
/* Now set the type and chip names */
if (kind == chip1) {
name = "chip1";
} else if (kind == chip2) {
name = "chip2";
}
/* Fill in the remaining client fields. */
strlcpy(client->name, name, I2C_NAME_SIZE);
data->type = kind;
mutex_init(&data->update_lock); /* Only if you use this field */
/* Any other initializations in data must be done here too. */
/* This function can write default values to the client registers, if
needed. */
foo_init_client(client);
/* Tell the i2c layer a new client has arrived */
if ((err = i2c_attach_client(client)))
goto ERROR1;
return 0;
/* OK, this is not exactly good programming practice, usually. But it is
very code-efficient in this case. */
ERROR1:
kfree(data);
ERROR0:
return err;
}
Removing the client (Legacy model)
==================================
The detach_client call back function is called when a client should be
removed. It may actually fail, but only when panicking. This code is
much simpler than the attachment code, fortunately!
int foo_detach_client(struct i2c_client *client)
{
int err;
/* Try to detach the client from i2c space */
if ((err = i2c_detach_client(client)))
return err;
kfree(i2c_get_clientdata(client));
return 0;
}
Initializing the module or kernel
=================================
static int __init foo_init(void)
{
return i2c_add_driver(&foo_driver);
}
When the kernel is booted, or when your foo driver module is inserted,
you have to do some initializing. Fortunately, just attaching (registering)
the driver module is usually enough.
static int __init foo_init(void)
{
int res;
if ((res = i2c_add_driver(&foo_driver))) {
printk("foo: Driver registration failed, module not inserted.\n");
return res;
}
return 0;
}
static void __exit foo_cleanup(void)
{
static void __exit foo_cleanup(void)
{
i2c_del_driver(&foo_driver);
}
}
/* Substitute your own name and email address */
MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>"
MODULE_DESCRIPTION("Driver for Barf Inc. Foo I2C devices");
/* Substitute your own name and email address */
MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>"
MODULE_DESCRIPTION("Driver for Barf Inc. Foo I2C devices");
/* a few non-GPL license types are also allowed */
MODULE_LICENSE("GPL");
/* a few non-GPL license types are also allowed */
MODULE_LICENSE("GPL");
module_init(foo_init);
module_exit(foo_cleanup);
module_init(foo_init);
module_exit(foo_cleanup);
Note that some functions are marked by `__init', and some data structures
by `__initdata'. These functions and structures can be removed after
kernel booting (or module loading) is completed.
Note that some functions are marked by `__init'. These functions can
be removed after kernel booting (or module loading) is completed.
Likewise, functions marked by `__exit' are dropped by the compiler when
the code is built into the kernel, as they would never be called.
Power Management
......@@ -548,32 +293,34 @@ Command function
A generic ioctl-like function call back is supported. You will seldom
need this, and its use is deprecated anyway, so newer design should not
use it. Set it to NULL.
use it.
Sending and receiving
=====================
If you want to communicate with your device, there are several functions
to do this. You can find all of them in i2c.h.
to do this. You can find all of them in <linux/i2c.h>.
If you can choose between plain i2c communication and SMBus level
communication, please use the last. All adapters understand SMBus level
commands, but only some of them understand plain i2c!
If you can choose between plain I2C communication and SMBus level
communication, please use the latter. All adapters understand SMBus level
commands, but only some of them understand plain I2C!
Plain i2c communication
Plain I2C communication
-----------------------
extern int i2c_master_send(struct i2c_client *,const char* ,int);
extern int i2c_master_recv(struct i2c_client *,char* ,int);
int i2c_master_send(struct i2c_client *client, const char *buf,
int count);
int i2c_master_recv(struct i2c_client *client, char *buf, int count);
These routines read and write some bytes from/to a client. The client
contains the i2c address, so you do not have to include it. The second
parameter contains the bytes the read/write, the third the length of the
buffer. Returned is the actual number of bytes read/written.
parameter contains the bytes to read/write, the third the number of bytes
to read/write (must be less than the length of the buffer.) Returned is
the actual number of bytes read/written.
extern int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msg,
int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msg,
int num);
This sends a series of messages. Each message can be a read or write,
......@@ -583,49 +330,45 @@ for each message the client address, the number of bytes of the message
and the message data itself.
You can read the file `i2c-protocol' for more information about the
actual i2c protocol.
actual I2C protocol.
SMBus communication
-------------------
extern s32 i2c_smbus_xfer (struct i2c_adapter * adapter, u16 addr,
unsigned short flags,
char read_write, u8 command, int size,
union i2c_smbus_data * data);
This is the generic SMBus function. All functions below are implemented
in terms of it. Never use this function directly!
s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
unsigned short flags, char read_write, u8 command,
int size, union i2c_smbus_data *data);
This is the generic SMBus function. All functions below are implemented
in terms of it. Never use this function directly!
extern s32 i2c_smbus_read_byte(struct i2c_client * client);
extern s32 i2c_smbus_write_byte(struct i2c_client * client, u8 value);
extern s32 i2c_smbus_read_byte_data(struct i2c_client * client, u8 command);
extern s32 i2c_smbus_write_byte_data(struct i2c_client * client,
s32 i2c_smbus_read_byte(struct i2c_client *client);
s32 i2c_smbus_write_byte(struct i2c_client *client, u8 value);
s32 i2c_smbus_read_byte_data(struct i2c_client *client, u8 command);
s32 i2c_smbus_write_byte_data(struct i2c_client *client,
u8 command, u8 value);
extern s32 i2c_smbus_read_word_data(struct i2c_client * client, u8 command);
extern s32 i2c_smbus_write_word_data(struct i2c_client * client,
s32 i2c_smbus_read_word_data(struct i2c_client *client, u8 command);
s32 i2c_smbus_write_word_data(struct i2c_client *client,
u8 command, u16 value);
extern s32 i2c_smbus_process_call(struct i2c_client *client,
s32 i2c_smbus_process_call(struct i2c_client *client,
u8 command, u16 value);
extern s32 i2c_smbus_read_block_data(struct i2c_client * client,
s32 i2c_smbus_read_block_data(struct i2c_client *client,
u8 command, u8 *values);
extern s32 i2c_smbus_write_block_data(struct i2c_client * client,
u8 command, u8 length,
u8 *values);
extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client * client,
s32 i2c_smbus_write_block_data(struct i2c_client *client,
u8 command, u8 length, const u8 *values);
s32 i2c_smbus_read_i2c_block_data(struct i2c_client *client,
u8 command, u8 length, u8 *values);
extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client * client,
s32 i2c_smbus_write_i2c_block_data(struct i2c_client *client,
u8 command, u8 length,
u8 *values);
const u8 *values);
These ones were removed from i2c-core because they had no users, but could
be added back later if needed:
extern s32 i2c_smbus_write_quick(struct i2c_client * client, u8 value);
extern s32 i2c_smbus_block_process_call(struct i2c_client *client,
u8 command, u8 length,
u8 *values)
s32 i2c_smbus_write_quick(struct i2c_client *client, u8 value);
s32 i2c_smbus_block_process_call(struct i2c_client *client,
u8 command, u8 length, u8 *values);
All these transactions return a negative errno value on failure. The 'write'
transactions return 0 on success; the 'read' transactions return the read
......@@ -642,7 +385,5 @@ General purpose routines
Below all general purpose routines are listed, that were not mentioned
before.
/* This call returns a unique low identifier for each registered adapter.
*/
extern int i2c_adapter_id(struct i2c_adapter *adap);
/* Return the adapter number for a specific adapter */
int i2c_adapter_id(struct i2c_adapter *adap);
......@@ -135,7 +135,7 @@ static int wait_for_pin(struct i2c_algo_pcf_data *adap, int *status) {
*status = get_pcf(adap, 1);
#ifndef STUB_I2C
while (timeout-- && (*status & I2C_PCF_PIN)) {
adap->waitforpin();
adap->waitforpin(adap->data);
*status = get_pcf(adap, 1);
}
if (*status & I2C_PCF_LAB) {
......@@ -208,7 +208,7 @@ static int pcf_init_8584 (struct i2c_algo_pcf_data *adap)
return -ENXIO;
}
printk(KERN_DEBUG "i2c-algo-pcf.o: deteted and initialized PCF8584.\n");
printk(KERN_DEBUG "i2c-algo-pcf.o: detected and initialized PCF8584.\n");
return 0;
}
......@@ -331,13 +331,16 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap,
int i;
int ret=0, timeout, status;
if (adap->xfer_begin)
adap->xfer_begin(adap->data);
/* Check for bus busy */
timeout = wait_for_bb(adap);
if (timeout) {
DEB2(printk(KERN_ERR "i2c-algo-pcf.o: "
"Timeout waiting for BB in pcf_xfer\n");)
return -EIO;
i = -EIO;
goto out;
}
for (i = 0;ret >= 0 && i < num; i++) {
......@@ -359,12 +362,14 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap,
if (timeout) {
if (timeout == -EINTR) {
/* arbitration lost */
return (-EINTR);
i = -EINTR;
goto out;
}
i2c_stop(adap);
DEB2(printk(KERN_ERR "i2c-algo-pcf.o: Timeout waiting "
"for PIN(1) in pcf_xfer\n");)
return (-EREMOTEIO);
i = -EREMOTEIO;
goto out;
}
#ifndef STUB_I2C
......@@ -372,7 +377,8 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap,
if (status & I2C_PCF_LRB) {
i2c_stop(adap);
DEB2(printk(KERN_ERR "i2c-algo-pcf.o: No LRB(1) in pcf_xfer\n");)
return (-EREMOTEIO);
i = -EREMOTEIO;
goto out;
}
#endif
......@@ -404,6 +410,9 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap,
}
}
out:
if (adap->xfer_end)
adap->xfer_end(adap->data);
return (i);
}
......
......@@ -97,6 +97,7 @@ config I2C_I801
ICH9
Tolapai
ICH10
PCH
This driver can also be built as a module. If so, the module
will be called i2c-i801.
......
......@@ -104,7 +104,8 @@ static int pcf_isa_getclock(void *data)
return (clock);
}
static void pcf_isa_waitforpin(void) {
static void pcf_isa_waitforpin(void *data)
{
DEFINE_WAIT(wait);
int timeout = 2;
unsigned long flags;
......
......@@ -123,7 +123,7 @@ static int __devinit hydra_probe(struct pci_dev *dev,
hydra_adap.name))
return -EBUSY;
hydra_bit_data.data = ioremap(base, pci_resource_len(dev, 0));
hydra_bit_data.data = pci_ioremap_bar(dev, 0);
if (hydra_bit_data.data == NULL) {
release_mem_region(base+offsetof(struct Hydra, CachePD), 4);
return -ENODEV;
......
......@@ -41,6 +41,7 @@
Tolapai 0x5032 32 hard yes yes yes
ICH10 0x3a30 32 hard yes yes yes
ICH10 0x3a60 32 hard yes yes yes
PCH 0x3b30 32 hard yes yes yes
Features supported by this driver:
Software PEC no
......@@ -576,6 +577,7 @@ static struct pci_device_id i801_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TOLAPAI_1) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_4) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PCH_SMBUS) },
{ 0, }
};
......@@ -599,6 +601,7 @@ static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id
case PCI_DEVICE_ID_INTEL_TOLAPAI_1:
case PCI_DEVICE_ID_INTEL_ICH10_4:
case PCI_DEVICE_ID_INTEL_ICH10_5:
case PCI_DEVICE_ID_INTEL_PCH_SMBUS:
i801_features |= FEATURE_I2C_BLOCK_READ;
/* fall through */
case PCI_DEVICE_ID_INTEL_82801DB_3:
......
#
# Miscellaneous I2C chip drivers configuration
#
# *** DEPRECATED! Do not add new entries! See Makefile ***
#
menu "Miscellaneous I2C Chip support"
......
#
# Makefile for miscellaneous I2C chip drivers.
#
# Think twice before you add a new driver to this directory.
# Do not add new drivers to this directory! It is DEPRECATED.
#
# Device drivers are better grouped according to the functionality they
# implement rather than to the bus they are connected to. In particular:
# * Hardware monitoring chip drivers go to drivers/hwmon
......
......@@ -266,6 +266,9 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
client->dev.platform_data = info->platform_data;
if (info->archdata)
client->dev.archdata = *info->archdata;
client->flags = info->flags;
client->addr = info->addr;
client->irq = info->irq;
......
......@@ -450,7 +450,7 @@ static inline void set_dev_node(struct device *dev, int node)
}
#endif
static inline void *dev_get_drvdata(struct device *dev)
static inline void *dev_get_drvdata(const struct device *dev)
{
return dev->driver_data;
}
......
......@@ -31,7 +31,10 @@ struct i2c_algo_pcf_data {
int (*getpcf) (void *data, int ctl);
int (*getown) (void *data);
int (*getclock) (void *data);
void (*waitforpin) (void);
void (*waitforpin) (void *data);
void (*xfer_begin) (void *data);
void (*xfer_end) (void *data);
/* Multi-master lost arbitration back-off delay (msecs)
* This should be set by the bus adapter or knowledgable client
......
......@@ -53,45 +53,44 @@ struct i2c_board_info;
* transmit one message at a time, a more complex version can be used to
* transmit an arbitrary number of messages without interruption.
*/
extern int i2c_master_send(struct i2c_client *,const char* ,int);
extern int i2c_master_recv(struct i2c_client *,char* ,int);
extern int i2c_master_send(struct i2c_client *client, const char *buf,
int count);
extern int i2c_master_recv(struct i2c_client *client, char *buf, int count);
/* Transfer num messages.
*/
extern int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num);
extern int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
int num);
/* This is the very generalized SMBus access routine. You probably do not
want to use this, though; one of the functions below may be much easier,
and probably just as fast.
Note that we use i2c_adapter here, because you do not need a specific
smbus adapter to call this function. */
extern s32 i2c_smbus_xfer (struct i2c_adapter * adapter, u16 addr,
unsigned short flags,
char read_write, u8 command, int size,
union i2c_smbus_data * data);
extern s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
unsigned short flags, char read_write, u8 command,
int size, union i2c_smbus_data *data);
/* Now follow the 'nice' access routines. These also document the calling
conventions of i2c_smbus_xfer. */
extern s32 i2c_smbus_read_byte(struct i2c_client * client);
extern s32 i2c_smbus_write_byte(struct i2c_client * client, u8 value);
extern s32 i2c_smbus_read_byte_data(struct i2c_client * client, u8 command);
extern s32 i2c_smbus_write_byte_data(struct i2c_client * client,
extern s32 i2c_smbus_read_byte(struct i2c_client *client);
extern s32 i2c_smbus_write_byte(struct i2c_client *client, u8 value);
extern s32 i2c_smbus_read_byte_data(struct i2c_client *client, u8 command);
extern s32 i2c_smbus_write_byte_data(struct i2c_client *client,
u8 command, u8 value);
extern s32 i2c_smbus_read_word_data(struct i2c_client * client, u8 command);
extern s32 i2c_smbus_write_word_data(struct i2c_client * client,
extern s32 i2c_smbus_read_word_data(struct i2c_client *client, u8 command);
extern s32 i2c_smbus_write_word_data(struct i2c_client *client,
u8 command, u16 value);
/* Returns the number of read bytes */
extern s32 i2c_smbus_read_block_data(struct i2c_client *client,
u8 command, u8 *values);
extern s32 i2c_smbus_write_block_data(struct i2c_client * client,
u8 command, u8 length,
const u8 *values);
extern s32 i2c_smbus_write_block_data(struct i2c_client *client,
u8 command, u8 length, const u8 *values);
/* Returns the number of read bytes */
extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client * client,
extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client *client,
u8 command, u8 length, u8 *values);
extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client * client,
extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client *client,
u8 command, u8 length,
const u8 *values);
......@@ -169,7 +168,7 @@ struct i2c_driver {
/* a ioctl like command that can be used to perform specific functions
* with the device.
*/
int (*command)(struct i2c_client *client,unsigned int cmd, void *arg);
int (*command)(struct i2c_client *client, unsigned int cmd, void *arg);
struct device_driver driver;
const struct i2c_device_id *id_table;
......@@ -224,14 +223,14 @@ static inline struct i2c_client *kobj_to_i2c_client(struct kobject *kobj)
return to_i2c_client(dev);
}
static inline void *i2c_get_clientdata (struct i2c_client *dev)
static inline void *i2c_get_clientdata(const struct i2c_client *dev)
{
return dev_get_drvdata (&dev->dev);
return dev_get_drvdata(&dev->dev);
}
static inline void i2c_set_clientdata (struct i2c_client *dev, void *data)
static inline void i2c_set_clientdata(struct i2c_client *dev, void *data)
{
dev_set_drvdata (&dev->dev, data);
dev_set_drvdata(&dev->dev, data);
}
/**
......@@ -240,6 +239,7 @@ static inline void i2c_set_clientdata (struct i2c_client *dev, void *data)
* @flags: to initialize i2c_client.flags
* @addr: stored in i2c_client.addr
* @platform_data: stored in i2c_client.dev.platform_data
* @archdata: copied into i2c_client.dev.archdata
* @irq: stored in i2c_client.irq
*
* I2C doesn't actually support hardware probing, although controllers and
......@@ -259,6 +259,7 @@ struct i2c_board_info {
unsigned short flags;
unsigned short addr;
void *platform_data;
struct dev_archdata *archdata;
int irq;
};
......@@ -272,7 +273,7 @@ struct i2c_board_info {
* fields (such as associated irq, or device-specific platform_data)
* are provided using conventional syntax.
*/
#define I2C_BOARD_INFO(dev_type,dev_addr) \
#define I2C_BOARD_INFO(dev_type, dev_addr) \
.type = (dev_type), .addr = (dev_addr)
......@@ -306,10 +307,12 @@ extern void i2c_unregister_device(struct i2c_client *);
*/
#ifdef CONFIG_I2C_BOARDINFO
extern int
i2c_register_board_info(int busnum, struct i2c_board_info const *info, unsigned n);
i2c_register_board_info(int busnum, struct i2c_board_info const *info,
unsigned n);
#else
static inline int
i2c_register_board_info(int busnum, struct i2c_board_info const *info, unsigned n)
i2c_register_board_info(int busnum, struct i2c_board_info const *info,
unsigned n)
{
return 0;
}
......@@ -328,11 +331,11 @@ struct i2c_algorithm {
using common I2C messages */
/* master_xfer should return the number of messages successfully
processed, or a negative value on error */
int (*master_xfer)(struct i2c_adapter *adap,struct i2c_msg *msgs,
int (*master_xfer)(struct i2c_adapter *adap, struct i2c_msg *msgs,
int num);
int (*smbus_xfer) (struct i2c_adapter *adap, u16 addr,
unsigned short flags, char read_write,
u8 command, int size, union i2c_smbus_data * data);
u8 command, int size, union i2c_smbus_data *data);
/* To determine what the adapter supports */
u32 (*functionality) (struct i2c_adapter *);
......@@ -345,7 +348,7 @@ struct i2c_algorithm {
struct i2c_adapter {
struct module *owner;
unsigned int id;
unsigned int class;
unsigned int class; /* classes to allow probing for */
const struct i2c_algorithm *algo; /* the algorithm to access the bus */
void *algo_data;
......@@ -369,14 +372,14 @@ struct i2c_adapter {
};
#define to_i2c_adapter(d) container_of(d, struct i2c_adapter, dev)
static inline void *i2c_get_adapdata (struct i2c_adapter *dev)
static inline void *i2c_get_adapdata(const struct i2c_adapter *dev)
{
return dev_get_drvdata (&dev->dev);
return dev_get_drvdata(&dev->dev);
}
static inline void i2c_set_adapdata (struct i2c_adapter *dev, void *data)
static inline void i2c_set_adapdata(struct i2c_adapter *dev, void *data)
{
dev_set_drvdata (&dev->dev, data);
dev_set_drvdata(&dev->dev, data);
}
/*flags for the client struct: */
......@@ -449,7 +452,7 @@ extern int i2c_probe(struct i2c_adapter *adapter,
const struct i2c_client_address_data *address_data,
int (*found_proc) (struct i2c_adapter *, int, int));
extern struct i2c_adapter* i2c_get_adapter(int id);
extern struct i2c_adapter *i2c_get_adapter(int id);
extern void i2c_put_adapter(struct i2c_adapter *adap);
......@@ -465,7 +468,7 @@ static inline int i2c_check_functionality(struct i2c_adapter *adap, u32 func)
return (func & i2c_get_functionality(adap)) == func;
}
/* Return id number for a specific adapter */
/* Return the adapter number for a specific adapter */
static inline int i2c_adapter_id(struct i2c_adapter *adap)
{
return adap->nr;
......@@ -526,7 +529,7 @@ struct i2c_msg {
#define I2C_FUNC_I2C 0x00000001
#define I2C_FUNC_10BIT_ADDR 0x00000002
#define I2C_FUNC_PROTOCOL_MANGLING 0x00000004 /* I2C_M_{REV_DIR_ADDR,NOSTART,..} */
#define I2C_FUNC_PROTOCOL_MANGLING 0x00000004 /* I2C_M_NOSTART etc. */
#define I2C_FUNC_SMBUS_PEC 0x00000008
#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL 0x00008000 /* SMBus 2.0 */
#define I2C_FUNC_SMBUS_QUICK 0x00010000
......@@ -541,8 +544,6 @@ struct i2c_msg {
#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000
#define I2C_FUNC_SMBUS_READ_I2C_BLOCK 0x04000000 /* I2C-like block xfer */
#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK 0x08000000 /* w/ 1-byte reg. addr. */
#define I2C_FUNC_SMBUS_READ_I2C_BLOCK_2 0x10000000 /* I2C-like block xfer */
#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK_2 0x20000000 /* w/ 2-byte reg. addr. */
#define I2C_FUNC_SMBUS_BYTE (I2C_FUNC_SMBUS_READ_BYTE | \
I2C_FUNC_SMBUS_WRITE_BYTE)
......@@ -554,8 +555,6 @@ struct i2c_msg {
I2C_FUNC_SMBUS_WRITE_BLOCK_DATA)
#define I2C_FUNC_SMBUS_I2C_BLOCK (I2C_FUNC_SMBUS_READ_I2C_BLOCK | \
I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)
#define I2C_FUNC_SMBUS_I2C_BLOCK_2 (I2C_FUNC_SMBUS_READ_I2C_BLOCK_2 | \
I2C_FUNC_SMBUS_WRITE_I2C_BLOCK_2)
#define I2C_FUNC_SMBUS_EMUL (I2C_FUNC_SMBUS_QUICK | \
I2C_FUNC_SMBUS_BYTE | \
......@@ -625,7 +624,7 @@ union i2c_smbus_data {
static unsigned short var[I2C_CLIENT_MAX_OPTS] = I2C_CLIENT_DEFAULTS; \
static unsigned int var##_num; \
module_param_array(var, short, &var##_num, 0); \
MODULE_PARM_DESC(var,desc)
MODULE_PARM_DESC(var, desc)
#define I2C_CLIENT_MODULE_PARM_FORCE(name) \
I2C_CLIENT_MODULE_PARM(force_##name, \
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment