Commit feff3880 authored by Krzysztof Helt's avatar Krzysztof Helt Committed by Linus Torvalds

tdfxfb: move I2C functionality into the tdfxfb

The I2C functionality provided by the i2c-voodoo3 driver is moved into the
tdfxfb (frame buffer driver for Voodoo3 cards).  This way there is no
conflict between the i2c driver and the fb driver.

The tdfxfb does not make use from the DDC functionality yet but provides
all the functionality of the i2c-voodoo3 driver.
Signed-off-by: default avatarKrzysztof Helt <krzysztof.h1@wp.pl>
Acked-by: default avatarJean Delvare <khali@linux-fr.org>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 8f9b1528
......@@ -1550,6 +1550,7 @@ config FB_3DFX
select FB_CFB_IMAGEBLIT
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_MODE_HELPERS
help
This driver supports graphics boards with the 3Dfx Banshee,
Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
......@@ -1565,6 +1566,14 @@ config FB_3DFX_ACCEL
This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
device driver with acceleration functions.
config FB_3DFX_I2C
bool "Enable DDC/I2C support"
depends on FB_3DFX && EXPERIMENTAL
select FB_DDC
default y
help
Say Y here if you want DDC/I2C support for your 3dfx Voodoo3.
config FB_VOODOO1
tristate "3Dfx Voodoo Graphics (sst1) support"
depends on FB && PCI
......
......@@ -10,6 +10,12 @@
* Created : Thu Sep 23 18:17:43 1999, hmallat
* Last modified: Tue Nov 2 21:19:47 1999, hmallat
*
* I2C part copied from the i2c-voodoo3.c driver by:
* Frodo Looijaard <frodol@dds.nl>,
* Philip Edelbrock <phil@netroedge.com>,
* Ralph Metzler <rjkm@thp.uni-koeln.de>, and
* Mark D. Studebaker <mdsxyz123@yahoo.com>
*
* Lots of the information here comes from the Daryll Strauss' Banshee
* patches to the XF86 server, and the rest comes from the 3dfx
* Banshee specification. I'm very much indebted to Daryll for his
......@@ -1167,6 +1173,190 @@ static struct fb_ops tdfxfb_ops = {
#endif
};
#ifdef CONFIG_FB_3DFX_I2C
/* The voo GPIO registers don't have individual masks for each bit
so we always have to read before writing. */
static void tdfxfb_i2c_setscl(void *data, int val)
{
struct tdfxfb_i2c_chan *chan = data;
struct tdfx_par *par = chan->par;
unsigned int r;
r = tdfx_inl(par, VIDSERPARPORT);
if (val)
r |= I2C_SCL_OUT;
else
r &= ~I2C_SCL_OUT;
tdfx_outl(par, VIDSERPARPORT, r);
tdfx_inl(par, VIDSERPARPORT); /* flush posted write */
}
static void tdfxfb_i2c_setsda(void *data, int val)
{
struct tdfxfb_i2c_chan *chan = data;
struct tdfx_par *par = chan->par;
unsigned int r;
r = tdfx_inl(par, VIDSERPARPORT);
if (val)
r |= I2C_SDA_OUT;
else
r &= ~I2C_SDA_OUT;
tdfx_outl(par, VIDSERPARPORT, r);
tdfx_inl(par, VIDSERPARPORT); /* flush posted write */
}
/* The GPIO pins are open drain, so the pins always remain outputs.
We rely on the i2c-algo-bit routines to set the pins high before
reading the input from other chips. */
static int tdfxfb_i2c_getscl(void *data)
{
struct tdfxfb_i2c_chan *chan = data;
struct tdfx_par *par = chan->par;
return (0 != (tdfx_inl(par, VIDSERPARPORT) & I2C_SCL_IN));
}
static int tdfxfb_i2c_getsda(void *data)
{
struct tdfxfb_i2c_chan *chan = data;
struct tdfx_par *par = chan->par;
return (0 != (tdfx_inl(par, VIDSERPARPORT) & I2C_SDA_IN));
}
static void tdfxfb_ddc_setscl(void *data, int val)
{
struct tdfxfb_i2c_chan *chan = data;
struct tdfx_par *par = chan->par;
unsigned int r;
r = tdfx_inl(par, VIDSERPARPORT);
if (val)
r |= DDC_SCL_OUT;
else
r &= ~DDC_SCL_OUT;
tdfx_outl(par, VIDSERPARPORT, r);
tdfx_inl(par, VIDSERPARPORT); /* flush posted write */
}
static void tdfxfb_ddc_setsda(void *data, int val)
{
struct tdfxfb_i2c_chan *chan = data;
struct tdfx_par *par = chan->par;
unsigned int r;
r = tdfx_inl(par, VIDSERPARPORT);
if (val)
r |= DDC_SDA_OUT;
else
r &= ~DDC_SDA_OUT;
tdfx_outl(par, VIDSERPARPORT, r);
tdfx_inl(par, VIDSERPARPORT); /* flush posted write */
}
static int tdfxfb_ddc_getscl(void *data)
{
struct tdfxfb_i2c_chan *chan = data;
struct tdfx_par *par = chan->par;
return (0 != (tdfx_inl(par, VIDSERPARPORT) & DDC_SCL_IN));
}
static int tdfxfb_ddc_getsda(void *data)
{
struct tdfxfb_i2c_chan *chan = data;
struct tdfx_par *par = chan->par;
return (0 != (tdfx_inl(par, VIDSERPARPORT) & DDC_SDA_IN));
}
static int __devinit tdfxfb_setup_ddc_bus(struct tdfxfb_i2c_chan *chan,
const char *name, struct device *dev)
{
int rc;
strlcpy(chan->adapter.name, name, sizeof(chan->adapter.name));
chan->adapter.owner = THIS_MODULE;
chan->adapter.class = I2C_CLASS_DDC;
chan->adapter.algo_data = &chan->algo;
chan->adapter.dev.parent = dev;
chan->algo.setsda = tdfxfb_ddc_setsda;
chan->algo.setscl = tdfxfb_ddc_setscl;
chan->algo.getsda = tdfxfb_ddc_getsda;
chan->algo.getscl = tdfxfb_ddc_getscl;
chan->algo.udelay = 10;
chan->algo.timeout = msecs_to_jiffies(500);
chan->algo.data = chan;
i2c_set_adapdata(&chan->adapter, chan);
rc = i2c_bit_add_bus(&chan->adapter);
if (rc == 0)
DPRINTK("I2C bus %s registered.\n", name);
else
chan->par = NULL;
return rc;
}
static int __devinit tdfxfb_setup_i2c_bus(struct tdfxfb_i2c_chan *chan,
const char *name, struct device *dev)
{
int rc;
strlcpy(chan->adapter.name, name, sizeof(chan->adapter.name));
chan->adapter.owner = THIS_MODULE;
chan->adapter.class = I2C_CLASS_TV_ANALOG;
chan->adapter.algo_data = &chan->algo;
chan->adapter.dev.parent = dev;
chan->algo.setsda = tdfxfb_i2c_setsda;
chan->algo.setscl = tdfxfb_i2c_setscl;
chan->algo.getsda = tdfxfb_i2c_getsda;
chan->algo.getscl = tdfxfb_i2c_getscl;
chan->algo.udelay = 10;
chan->algo.timeout = msecs_to_jiffies(500);
chan->algo.data = chan;
i2c_set_adapdata(&chan->adapter, chan);
rc = i2c_bit_add_bus(&chan->adapter);
if (rc == 0)
DPRINTK("I2C bus %s registered.\n", name);
else
chan->par = NULL;
return rc;
}
static void __devinit tdfxfb_create_i2c_busses(struct fb_info *info)
{
struct tdfx_par *par = info->par;
tdfx_outl(par, VIDINFORMAT, 0x8160);
tdfx_outl(par, VIDSERPARPORT, 0xcffc0020);
par->chan[0].par = par;
par->chan[1].par = par;
tdfxfb_setup_ddc_bus(&par->chan[0], "Voodoo3-DDC", info->dev);
tdfxfb_setup_i2c_bus(&par->chan[1], "Voodoo3-I2C", info->dev);
}
static void tdfxfb_delete_i2c_busses(struct tdfx_par *par)
{
if (par->chan[0].par)
i2c_del_adapter(&par->chan[0].adapter);
par->chan[0].par = NULL;
if (par->chan[1].par)
i2c_del_adapter(&par->chan[1].adapter);
par->chan[1].par = NULL;
}
#endif /* CONFIG_FB_3DFX_I2C */
/**
* tdfxfb_probe - Device Initializiation
*
......@@ -1284,7 +1474,9 @@ static int __devinit tdfxfb_probe(struct pci_dev *pdev,
if (hwcursor)
info->fix.smem_len = (info->fix.smem_len - 1024) &
(PAGE_MASK << 1);
#ifdef CONFIG_FB_3DFX_I2C
tdfxfb_create_i2c_busses(info);
#endif
if (!mode_option)
mode_option = "640x480@60";
......@@ -1315,6 +1507,9 @@ static int __devinit tdfxfb_probe(struct pci_dev *pdev,
return 0;
out_err_iobase:
#ifdef CONFIG_FB_3DFX_I2C
tdfxfb_delete_i2c_busses(default_par);
#endif
if (default_par->mtrr_handle >= 0)
mtrr_del(default_par->mtrr_handle, info->fix.smem_start,
info->fix.smem_len);
......@@ -1379,6 +1574,9 @@ static void __devexit tdfxfb_remove(struct pci_dev *pdev)
struct tdfx_par *par = info->par;
unregister_framebuffer(info);
#ifdef CONFIG_FB_3DFX_I2C
tdfxfb_delete_i2c_busses(par);
#endif
if (par->mtrr_handle >= 0)
mtrr_del(par->mtrr_handle, info->fix.smem_start,
info->fix.smem_len);
......
#ifndef _TDFX_H
#define _TDFX_H
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
/* membase0 register offsets */
#define STATUS 0x00
#define PCIINIT0 0x04
......@@ -123,6 +126,18 @@
#define VIDCFG_PIXFMT_SHIFT 18
#define DACMODE_2X BIT(0)
/* I2C bit locations in the VIDSERPARPORT register */
#define DDC_ENAB 0x00040000
#define DDC_SCL_OUT 0x00080000
#define DDC_SDA_OUT 0x00100000
#define DDC_SCL_IN 0x00200000
#define DDC_SDA_IN 0x00400000
#define I2C_ENAB 0x00800000
#define I2C_SCL_OUT 0x01000000
#define I2C_SDA_OUT 0x02000000
#define I2C_SCL_IN 0x04000000
#define I2C_SDA_IN 0x08000000
/* VGA rubbish, need to change this for multihead support */
#define MISC_W 0x3c2
#define MISC_R 0x3cc
......@@ -168,12 +183,23 @@ struct banshee_reg {
unsigned long miscinit0;
};
struct tdfx_par;
struct tdfxfb_i2c_chan {
struct tdfx_par *par;
struct i2c_adapter adapter;
struct i2c_algo_bit_data algo;
};
struct tdfx_par {
u32 max_pixclock;
u32 palette[16];
void __iomem *regbase_virt;
unsigned long iobase;
int mtrr_handle;
#ifdef CONFIG_FB_3DFX_I2C
struct tdfxfb_i2c_chan chan[2];
#endif
};
#endif /* __KERNEL__ */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment