Commit ff570a01 authored by Lokesh Vutla's avatar Lokesh Vutla Committed by Tony Lindgren

ARM: dts: dra71-evm: mdio: Fix impedance values

v1 series[1] for dp83867 phy impedance-control support,
specifies to use ti,impedance-control with a value. These
properties got updated iduring review to specify whether
min or max impedance. But the DT still uses the old values
which never takes effect. Update the DT node by using the
proper DT properties.

[1] https://patchwork.kernel.org/patch/9239729/

Fixes: 9868bc585ae2c ("ARM: dts: Add support for dra718-evm")
Signed-off-by: default avatarLokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 5601ca47
...@@ -190,7 +190,7 @@ dp83867_0: ethernet-phy@2 { ...@@ -190,7 +190,7 @@ dp83867_0: ethernet-phy@2 {
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
ti,impedance-control = <0x1f>; ti,min-output-impedance;
}; };
dp83867_1: ethernet-phy@3 { dp83867_1: ethernet-phy@3 {
...@@ -198,7 +198,7 @@ dp83867_1: ethernet-phy@3 { ...@@ -198,7 +198,7 @@ dp83867_1: ethernet-phy@3 {
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>; ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>; ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
ti,impedance-control = <0x1f>; ti,min-output-impedance;
}; };
}; };
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment