net: hns3: add support for dump ncl config by debugfs

This patch allow users to dump content of NCL_CONFIG by using debugfs
command.
Command format:
	echo dump ncl_config <offset> <length> > cmd
It will print as follows:
	hns3 0000:7d:00.0: offset |    data
	hns3 0000:7d:00.0: 0x0000 | 0x00000020
	hns3 0000:7d:00.0: 0x0004 | 0x00000400
	hns3 0000:7d:00.0: 0x0008 | 0x08020401
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c

@@ -248,6 +248,7 @@ static void hns3_dbg_help(struct hnae3_handle *h)
 	dev_info(&h->pdev->dev, "dump qos buf cfg\n");
 	dev_info(&h->pdev->dev, "dump mng tbl\n");
 	dev_info(&h->pdev->dev, "dump reset info\n");
+	dev_info(&h->pdev->dev, "dump ncl_config <offset> <length>(in hex)\n");
 
 	memset(printf_buf, 0, HNS3_DBG_BUF_LEN);
 	strncat(printf_buf, "dump reg [[bios common] [ssu <prt_id>]",

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h

@@ -237,6 +237,9 @@ enum hclge_opcode_type {
 	/* Led command */
 	HCLGE_OPC_LED_STATUS_CFG	= 0xB000,
 
+	/* NCL config command */
+	HCLGE_OPC_QUERY_NCL_CONFIG	= 0x7011,
+
 	/* SFP command */
 	HCLGE_OPC_SFP_GET_SPEED		= 0x7104,
 

drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c

@@ -921,6 +921,69 @@ static void hclge_dbg_dump_rst_info(struct hclge_dev *hdev)
 		 hdev->rst_stats.reset_cnt);
 }
 
+/* hclge_dbg_dump_ncl_config: print specified range of NCL_CONFIG file
+ * @hdev: pointer to struct hclge_dev
+ * @cmd_buf: string that contains offset and length
+ */
+static void hclge_dbg_dump_ncl_config(struct hclge_dev *hdev, char *cmd_buf)
+{
+#define HCLGE_MAX_NCL_CONFIG_OFFSET	4096
+#define HCLGE_MAX_NCL_CONFIG_LENGTH	(20 + 24 * 4)
+#define HCLGE_CMD_DATA_NUM		6
+
+	struct hclge_desc desc[5];
+	u32 byte_offset;
+	int bd_num = 5;
+	int offset;
+	int length;
+	int data0;
+	int ret;
+	int i;
+	int j;
+
+	ret = sscanf(cmd_buf, "%x %x", &offset, &length);
+	if (ret != 2 || offset >= HCLGE_MAX_NCL_CONFIG_OFFSET ||
+	    length > HCLGE_MAX_NCL_CONFIG_OFFSET - offset) {
+		dev_err(&hdev->pdev->dev, "Invalid offset or length.\n");
+		return;
+	}
+	if (offset < 0 || length <= 0) {
+		dev_err(&hdev->pdev->dev, "Non-positive offset or length.\n");
+		return;
+	}
+
+	dev_info(&hdev->pdev->dev, "offset |    data\n");
+
+	while (length > 0) {
+		data0 = offset;
+		if (length >= HCLGE_MAX_NCL_CONFIG_LENGTH)
+			data0 |= HCLGE_MAX_NCL_CONFIG_LENGTH << 16;
+		else
+			data0 |= length << 16;
+		ret = hclge_dbg_cmd_send(hdev, desc, data0, bd_num,
+					 HCLGE_OPC_QUERY_NCL_CONFIG);
+		if (ret)
+			return;
+
+		byte_offset = offset;
+		for (i = 0; i < bd_num; i++) {
+			for (j = 0; j < HCLGE_CMD_DATA_NUM; j++) {
+				if (i == 0 && j == 0)
+					continue;
+
+				dev_info(&hdev->pdev->dev, "0x%04x | 0x%08x\n",
+					 byte_offset,
+					 le32_to_cpu(desc[i].data[j]));
+				byte_offset += sizeof(u32);
+				length -= sizeof(u32);
+				if (length <= 0)
+					return;
+			}
+		}
+		offset += HCLGE_MAX_NCL_CONFIG_LENGTH;
+	}
+}
+
 int hclge_dbg_run_cmd(struct hnae3_handle *handle, char *cmd_buf)
 {
 	struct hclge_vport *vport = hclge_get_vport(handle);
@@ -946,6 +1009,9 @@ int hclge_dbg_run_cmd(struct hnae3_handle *handle, char *cmd_buf)
 		hclge_dbg_dump_reg_cmd(hdev, cmd_buf);
 	} else if (strncmp(cmd_buf, "dump reset info", 15) == 0) {
 		hclge_dbg_dump_rst_info(hdev);
+	} else if (strncmp(cmd_buf, "dump ncl_config", 15) == 0) {
+		hclge_dbg_dump_ncl_config(hdev,
+					  &cmd_buf[sizeof("dump ncl_config")]);
 	} else {
 		dev_info(&hdev->pdev->dev, "unknown command\n");
 		return -EINVAL;