Merge mronstrom@bk-internal.mysql.com:/home/bk/mysql-5.1-new

into  c-870ae253.1238-1-64736c10.cust.bredbandsbolaget.se:/home/pappa/wl2826

BUILD/SETUP.sh

@@ -116,6 +116,7 @@ valgrind_flags="$valgrind_flags -DMYSQL_SERVER_SUFFIX=-valgrind-max"
 # Used in -debug builds
 debug_cflags="-DUNIV_MUST_NOT_INLINE -DEXTRA_DEBUG -DFORCE_INIT_OF_VARS "
 debug_cflags="$debug_cflags -DSAFEMALLOC -DPEDANTIC_SAFEMALLOC -DSAFE_MUTEX"
+error_inject="--with-error-inject "
 #
 # Base C++ flags for all builds
 base_cxxflags="-felide-constructors -fno-exceptions -fno-rtti"

BUILD/compile-pentium-debug-max

@@ -4,6 +4,6 @@ path=`dirname $0`
 . "$path/SETUP.sh" "$@" --with-debug=full
 
 extra_flags="$pentium_cflags $debug_cflags"
-extra_configs="$pentium_configs $debug_configs $max_configs"
+extra_configs="$pentium_configs $debug_configs $max_configs $error_inject"
 
 . "$path/FINISH.sh"

configure.in

@@ -666,6 +666,7 @@ else
   AC_MSG_RESULT([no])
 fi
 
+  
 MYSQL_SYS_LARGEFILE
 
 # Types that must be checked AFTER large file support is checked
@@ -1608,6 +1609,21 @@ else
   CXXFLAGS="$OPTIMIZE_CXXFLAGS -DDBUG_OFF $CXXFLAGS"
 fi
 
+# If we should allow error injection tests
+AC_ARG_WITH(error-inject,
+    [ --with-error-inject    Enable error injection in MySQL Server],
+    [ with_error_inject=$withval ],
+    [ with_error_inject=no ])
+
+if test $with_debug != "no"
+then
+  if test "$with_error_inject" = "yes"
+  then
+    AC_DEFINE([ERROR_INJECT_SUPPORT], [1],
+              [Enable error injection in MySQL Server])
+  fi
+fi
+
 AC_ARG_WITH([fast-mutexes],
 	    AC_HELP_STRING([--with-fast-mutexes], 
 	    [Compile with fast mutexes (default is disabled)]),

include/my_sys.h

@@ -559,7 +559,7 @@ extern File my_register_filename(File fd, const char *FileName,
 				 enum file_type type_of_file,
 				 uint error_message_number, myf MyFlags);
 extern File my_create(const char *FileName,int CreateFlags,
-		      int AccsesFlags, myf MyFlags);
+		      int AccessFlags, myf MyFlags);
 extern int my_close(File Filedes,myf MyFlags);
 extern File my_dup(File file, myf MyFlags);
 extern int my_mkdir(const char *dir, int Flags, myf MyFlags);

mysql-test/r/ndb_partition_key.result

@@ -165,6 +165,20 @@ ENGINE=NDB
 PARTITION BY KEY(c3) PARTITIONS 5;
 ALTER TABLE t1 COALESCE PARTITION 4;
 DROP TABLE t1;
+CREATE TABLE t1 (a int primary key)
+ENGINE=NDB
+PARTITION BY KEY(a);
+ALTER TABLE t1 OPTIMIZE PARTITION p0;
+ERROR HY000: Table storage engine for 't1' doesn't have this option
+ALTER TABLE t1 CHECK PARTITION p0;
+ERROR HY000: Table storage engine for 't1' doesn't have this option
+ALTER TABLE t1 REPAIR PARTITION p0;
+ERROR HY000: Table storage engine for 't1' doesn't have this option
+ALTER TABLE t1 ANALYZE PARTITION p0;
+ERROR HY000: Table storage engine for 't1' doesn't have this option
+ALTER TABLE t1 REBUILD PARTITION p0;
+ERROR HY000: Table storage engine for 't1' doesn't have this option
+DROP TABLE t1;
 CREATE TABLE t1 (
 c1 MEDIUMINT NOT NULL AUTO_INCREMENT,
 c2 TEXT NOT NULL,

mysql-test/t/ndb_partition_key.test

@@ -154,6 +154,24 @@ ALTER TABLE t1 COALESCE PARTITION 4;
 
 DROP TABLE t1;
 
+#
+# Bug 16822: OPTIMIZE TABLE hangs test
+#
+CREATE TABLE t1 (a int primary key)
+ENGINE=NDB
+PARTITION BY KEY(a);
+--error 1031
+ALTER TABLE t1 OPTIMIZE PARTITION p0;
+--error 1031
+ALTER TABLE t1 CHECK PARTITION p0;
+--error 1031
+ALTER TABLE t1 REPAIR PARTITION p0;
+--error 1031
+ALTER TABLE t1 ANALYZE PARTITION p0;
+--error 1031
+ALTER TABLE t1 REBUILD PARTITION p0;
+DROP TABLE t1;
+
 #
 # BUG 16806: ALTER TABLE fails
 #

sql/ha_ndbcluster.cc

@@ -4711,7 +4711,10 @@ int ha_ndbcluster::create(const char *name,
   DBUG_RETURN(my_errno);
 }
 
-int ha_ndbcluster::create_handler_files(const char *file, HA_CREATE_INFO *info) 
+int ha_ndbcluster::create_handler_files(const char *file,
+                                        const char *old_name,
+                                        int action_flag,
+                                        HA_CREATE_INFO *info) 
 { 
   char path[FN_REFLEN];
   const char *name;
@@ -4723,6 +4726,10 @@ int ha_ndbcluster::create_handler_files(const char *file, HA_CREATE_INFO *info)
 
   DBUG_ENTER("create_handler_files");
 
+  if (action_flag != CHF_INDEX_FLAG)
+  {
+    DBUG_RETURN(FALSE);
+  }
   DBUG_PRINT("enter", ("file: %s", file));
   if (!(ndb= get_ndb()))
     DBUG_RETURN(HA_ERR_NO_CONNECTION);

sql/ha_ndbcluster.h

@@ -610,7 +610,8 @@ class ha_ndbcluster: public handler
   int rename_table(const char *from, const char *to);
   int delete_table(const char *name);
   int create(const char *name, TABLE *form, HA_CREATE_INFO *info);
-  int create_handler_files(const char *file, HA_CREATE_INFO *info);
+  int create_handler_files(const char *file, const char *old_name,
+                           int action_flag, HA_CREATE_INFO *info);
   int get_default_no_partitions(ulonglong max_rows);
   bool get_no_parts(const char *name, uint *no_parts);
   void set_auto_partitions(partition_info *part_info);

sql/ha_partition.h

@@ -179,7 +179,8 @@ public:
   virtual int rename_table(const char *from, const char *to);
   virtual int create(const char *name, TABLE *form,
 		     HA_CREATE_INFO *create_info);
-  virtual int create_handler_files(const char *name, 
+  virtual int create_handler_files(const char *name,
+                                   const char *old_name, int action_flag,
                                    HA_CREATE_INFO *create_info);
   virtual void update_create_info(HA_CREATE_INFO *create_info);
   virtual char *update_table_comment(const char *comment);

sql/handler.h

@@ -632,6 +632,7 @@ typedef struct {
 
 #define UNDEF_NODEGROUP 65535
 class Item;
+struct st_table_log_memory_entry;
 
 class partition_info;
 
@@ -639,7 +640,6 @@ struct st_partition_iter;
 #define NOT_A_PARTITION_ID ((uint32)-1)
 
 
-
 typedef struct st_ha_create_information
 {
   CHARSET_INFO *table_charset, *default_table_charset;
@@ -1379,8 +1379,15 @@ public:
   virtual void drop_table(const char *name);
   
   virtual int create(const char *name, TABLE *form, HA_CREATE_INFO *info)=0;
-  virtual int create_handler_files(const char *name, HA_CREATE_INFO *info) 
-  { return FALSE;}
+
+#define CHF_CREATE_FLAG 0
+#define CHF_DELETE_FLAG 1
+#define CHF_RENAME_FLAG 2
+#define CHF_INDEX_FLAG  3
+
+  virtual int create_handler_files(const char *name, const char *old_name,
+                                   int action_flag, HA_CREATE_INFO *info)
+  { return FALSE; }
 
   virtual int change_partitions(HA_CREATE_INFO *create_info,
                                 const char *path,

sql/mysql_priv.h

@@ -613,6 +613,100 @@ struct Query_cache_query_flags
 #define query_cache_invalidate_by_MyISAM_filename_ref NULL
 #endif /*HAVE_QUERY_CACHE*/
 
+/*
+  Error injector Macros to enable easy testing of recovery after failures
+  in various error cases.
+*/
+#ifndef ERROR_INJECT_SUPPORT
+
+#define ERROR_INJECT(x) 0
+#define ERROR_INJECT_ACTION(x,action) 0
+#define ERROR_INJECT_CRASH(x) 0
+#define ERROR_INJECT_VALUE(x) 0
+#define ERROR_INJECT_VALUE_ACTION(x,action) 0
+#define ERROR_INJECT_VALUE_CRASH(x) 0
+#define SET_ERROR_INJECT_VALUE(x)
+
+#else
+
+inline bool check_and_unset_keyword(const char *dbug_str)
+{
+  const char *extra_str= "-d,";
+  char total_str[200];
+  if (_db_strict_keyword_ (dbug_str))
+  {
+    strxmov(total_str, extra_str, dbug_str, NullS);
+    DBUG_SET(total_str);
+    return 1;
+  }
+  return 0;
+}
+
+
+inline bool
+check_and_unset_inject_value(int value)
+{
+  THD *thd= current_thd;
+  if (thd->error_inject_value == (uint)value)
+  {
+    thd->error_inject_value= 0;
+    return 1;
+  }
+  return 0;
+}
+
+/*
+  ERROR INJECT MODULE:
+  --------------------
+  These macros are used to insert macros from the application code.
+  The event that activates those error injections can be activated
+  from SQL by using:
+  SET SESSION dbug=+d,code;
+
+  After the error has been injected, the macros will automatically
+  remove the debug code, thus similar to using:
+  SET SESSION dbug=-d,code
+  from SQL.
+
+  ERROR_INJECT_CRASH will inject a crash of the MySQL Server if code
+  is set when macro is called. ERROR_INJECT_CRASH can be used in
+  if-statements, it will always return FALSE unless of course it
+  crashes in which case it doesn't return at all.
+
+  ERROR_INJECT_ACTION will inject the action specified in the action
+  parameter of the macro, before performing the action the code will
+  be removed such that no more events occur. ERROR_INJECT_ACTION
+  can also be used in if-statements and always returns FALSE.
+  ERROR_INJECT can be used in a normal if-statement, where the action
+  part is performed in the if-block. The macro returns TRUE if the
+  error was activated and otherwise returns FALSE. If activated the
+  code is removed.
+
+  Sometimes it is necessary to perform error inject actions as a serie
+  of events. In this case one can use one variable on the THD object.
+  Thus one sets this value by using e.g. SET_ERROR_INJECT_VALUE(100).
+  Then one can later test for it by using ERROR_INJECT_CRASH_VALUE,
+  ERROR_INJECT_ACTION_VALUE and ERROR_INJECT_VALUE. This have the same
+  behaviour as the above described macros except that they use the
+  error inject value instead of a code used by DBUG macros.
+*/
+#define SET_ERROR_INJECT_VALUE(x) \
+  current_thd->error_inject_value= (x)
+#define ERROR_INJECT_CRASH(code) \
+  DBUG_EVALUATE_IF(code, (abort(), 0), 0)
+#define ERROR_INJECT_ACTION(code, action) \
+  (check_and_unset_keyword(code) ? ((action), 0) : 0)
+#define ERROR_INJECT(code) \
+  check_and_unset_keyword(code)
+#define ERROR_INJECT_VALUE(value) \
+  check_and_unset_inject_value(value)
+#define ERROR_INJECT_VALUE_ACTION(value,action) \
+  (check_and_unset_inject_value(value) ? (action) : 0)
+#define ERROR_INJECT_VALUE_CRASH(value) \
+  ERROR_INJECT_VALUE_ACTION(value, (abort(), 0))
+
+#endif
+
 uint build_table_path(char *buff, size_t bufflen, const char *db,
                       const char *table, const char *ext);
 void write_bin_log(THD *thd, bool clear_error,
@@ -1090,6 +1184,16 @@ uint prep_alter_part_table(THD *thd, TABLE *table, ALTER_INFO *alter_info,
 bool remove_table_from_cache(THD *thd, const char *db, const char *table,
                              uint flags);
 
+#define NORMAL_PART_NAME 0
+#define TEMP_PART_NAME 1
+#define RENAMED_PART_NAME 2
+void create_partition_name(char *out, const char *in1,
+                           const char *in2, uint name_variant,
+                           bool translate);
+void create_subpartition_name(char *out, const char *in1,
+                              const char *in2, const char *in3,
+                              uint name_variant);
+
 typedef struct st_lock_param_type
 {
   ulonglong copied;
@@ -1109,14 +1213,94 @@ typedef struct st_lock_param_type
   uint key_count;
   uint db_options;
   uint pack_frm_len;
+  partition_info *part_info;
 } ALTER_PARTITION_PARAM_TYPE;
 
 void mem_alloc_error(size_t size);
-#define WFRM_INITIAL_WRITE 1
-#define WFRM_CREATE_HANDLER_FILES 2
+
+enum ddl_log_entry_code
+{
+  /*
+    DDL_LOG_EXECUTE_CODE:
+      This is a code that indicates that this is a log entry to
+      be executed, from this entry a linked list of log entries
+      can be found and executed.
+    DDL_LOG_ENTRY_CODE:
+      An entry to be executed in a linked list from an execute log
+      entry.
+    DDL_IGNORE_LOG_ENTRY_CODE:
+      An entry that is to be ignored
+  */
+  DDL_LOG_EXECUTE_CODE = 'e',
+  DDL_LOG_ENTRY_CODE = 'l',
+  DDL_IGNORE_LOG_ENTRY_CODE = 'i'
+};
+
+enum ddl_log_action_code
+{
+  /*
+    The type of action that a DDL_LOG_ENTRY_CODE entry is to
+    perform.
+    DDL_LOG_DELETE_ACTION:
+      Delete an entity
+    DDL_LOG_RENAME_ACTION:
+      Rename an entity
+    DDL_LOG_REPLACE_ACTION:
+      Rename an entity after removing the previous entry with the
+      new name, that is replace this entry.
+  */
+  DDL_LOG_DELETE_ACTION = 'd',
+  DDL_LOG_RENAME_ACTION = 'r',
+  DDL_LOG_REPLACE_ACTION = 's'
+};
+
+
+typedef struct st_ddl_log_entry
+{
+  const char *name;
+  const char *from_name;
+  const char *handler_name;
+  uint next_entry;
+  uint entry_pos;
+  enum ddl_log_entry_code entry_type;
+  enum ddl_log_action_code action_type;
+  /*
+    Most actions have only one phase. REPLACE does however have two
+    phases. The first phase removes the file with the new name if
+    there was one there before and the second phase renames the
+    old name to the new name.
+  */
+  char phase;
+} DDL_LOG_ENTRY;
+
+typedef struct st_ddl_log_memory_entry
+{
+  uint entry_pos;
+  struct st_ddl_log_memory_entry *next_log_entry;
+  struct st_ddl_log_memory_entry *prev_log_entry;
+  struct st_ddl_log_memory_entry *next_active_log_entry;
+} DDL_LOG_MEMORY_ENTRY;
+
+
+bool write_ddl_log_entry(DDL_LOG_ENTRY *ddl_log_entry,
+                           DDL_LOG_MEMORY_ENTRY **active_entry);
+bool write_execute_ddl_log_entry(uint first_entry,
+                                   bool complete,
+                                   DDL_LOG_MEMORY_ENTRY **active_entry);
+bool deactivate_ddl_log_entry(uint entry_no);
+void release_ddl_log_memory_entry(DDL_LOG_MEMORY_ENTRY *log_entry);
+bool sync_ddl_log();
+void release_ddl_log();
+void execute_ddl_log_recovery();
+bool execute_ddl_log_entry(THD *thd, uint first_entry);
+
+extern pthread_mutex_t LOCK_gdl;
+
+#define WFRM_WRITE_SHADOW 1
+#define WFRM_INSTALL_SHADOW 2
 #define WFRM_PACK_FRM 4
 bool mysql_write_frm(ALTER_PARTITION_PARAM_TYPE *lpt, uint flags);
-bool abort_and_upgrade_lock(ALTER_PARTITION_PARAM_TYPE *lpt);
+int abort_and_upgrade_lock(ALTER_PARTITION_PARAM_TYPE *lpt);
 void close_open_tables_and_downgrade(ALTER_PARTITION_PARAM_TYPE *lpt);
 void mysql_wait_completed_table(ALTER_PARTITION_PARAM_TYPE *lpt, TABLE *my_table);
 

sql/mysqld.cc

@@ -3605,6 +3605,7 @@ we force server id to 2, but this MySQL server will not act as a slave.");
       unireg_abort(1);
     }
   }
+  execute_ddl_log_recovery();
 
   create_shutdown_thread();
   create_maintenance_thread();
@@ -3656,6 +3657,7 @@ we force server id to 2, but this MySQL server will not act as a slave.");
     pthread_cond_wait(&COND_thread_count,&LOCK_thread_count);
   (void) pthread_mutex_unlock(&LOCK_thread_count);
 
+  release_ddl_log();
 #if defined(__WIN__) && !defined(EMBEDDED_LIBRARY)
   if (Service.IsNT() && start_mode)
     Service.Stop();

sql/partition_element.h

@@ -36,6 +36,8 @@ enum partition_state {
   PART_IS_ADDED= 8
 };
 
+struct st_ddl_log_memory_entry;
+
 class partition_element :public Sql_alloc {
 public:
   List<partition_element> subpartitions;
@@ -44,6 +46,7 @@ public:
   ulonglong part_min_rows;
   char *partition_name;
   char *tablespace_name;
+  struct st_ddl_log_memory_entry *log_entry;
   longlong range_value;
   char* part_comment;
   char* data_file_name;
@@ -55,7 +58,8 @@ public:
 
   partition_element()
   : part_max_rows(0), part_min_rows(0), partition_name(NULL),
-    tablespace_name(NULL), range_value(0), part_comment(NULL),
+    tablespace_name(NULL), log_entry(NULL),
+    range_value(0), part_comment(NULL),
     data_file_name(NULL), index_file_name(NULL),
     engine_type(NULL),part_state(PART_NORMAL),
     nodegroup_id(UNDEF_NODEGROUP), has_null_value(FALSE)

sql/partition_info.h

@@ -28,7 +28,7 @@ typedef int (*get_part_id_func)(partition_info *part_info,
                                  longlong *func_value);
 typedef uint32 (*get_subpart_id_func)(partition_info *part_info);
 
-
+struct st_ddl_log_memory_entry;
 
 class partition_info : public Sql_alloc
 {
@@ -76,7 +76,11 @@ public:
   Item *subpart_expr;
 
   Item *item_free_list;
-  
+
+  struct st_ddl_log_memory_entry *first_log_entry;
+  struct st_ddl_log_memory_entry *exec_log_entry;
+  struct st_ddl_log_memory_entry *frm_log_entry;
+
   /* 
     A bitmap of partitions used by the current query. 
     Usage pattern:
@@ -191,6 +195,7 @@ public:
     part_field_array(NULL), subpart_field_array(NULL),
     full_part_field_array(NULL),
     part_expr(NULL), subpart_expr(NULL), item_free_list(NULL),
+    first_log_entry(NULL), exec_log_entry(NULL), frm_log_entry(NULL),
     list_array(NULL),
     part_info_string(NULL),
     part_func_string(NULL), subpart_func_string(NULL),

sql/share/errmsg.txt

@@ -5826,6 +5826,8 @@ ER_NDB_CANT_SWITCH_BINLOG_FORMAT
 	eng "The NDB cluster engine does not support changing the binlog format on the fly yet"
 ER_PARTITION_NO_TEMPORARY
 	eng "Cannot create temporary table with partitions"
+ER_DDL_LOG_ERROR
+        eng "Error in DDL log"
 ER_NULL_IN_VALUES_LESS_THAN
         eng "Not allowed to use NULL value in VALUES LESS THAN"
         swe "Det r inte tilltet att anvnda NULL-vrden i VALUES LESS THAN"

sql/sql_base.cc

@@ -6140,9 +6140,8 @@ bool is_equal(const LEX_STRING *a, const LEX_STRING *b)
     abort_and_upgrade_lock()
     lpt                           Parameter passing struct
     All parameters passed through the ALTER_PARTITION_PARAM_TYPE object
-  RETURN VALUES
-    TRUE                          Failure
-    FALSE                         Success
+  RETURN VALUE
+    0
   DESCRIPTION
     Remember old lock level (for possible downgrade later on), abort all
     waiting threads and ensure that all keeping locks currently are
@@ -6156,23 +6155,17 @@ bool is_equal(const LEX_STRING *a, const LEX_STRING *b)
     old_lock_level                Old lock level
 */
 
-bool abort_and_upgrade_lock(ALTER_PARTITION_PARAM_TYPE *lpt)
+int abort_and_upgrade_lock(ALTER_PARTITION_PARAM_TYPE *lpt)
 {
   uint flags= RTFC_WAIT_OTHER_THREAD_FLAG | RTFC_CHECK_KILLED_FLAG;
-  int error= FALSE;
   DBUG_ENTER("abort_and_upgrade_locks");
 
   lpt->old_lock_type= lpt->table->reginfo.lock_type;
   VOID(pthread_mutex_lock(&LOCK_open));
   mysql_lock_abort(lpt->thd, lpt->table, TRUE);
   VOID(remove_table_from_cache(lpt->thd, lpt->db, lpt->table_name, flags));
-  if (lpt->thd->killed)
-  {
-    lpt->thd->no_warnings_for_error= 0;
-    error= TRUE;
-  }
   VOID(pthread_mutex_unlock(&LOCK_open));
-  DBUG_RETURN(error);
+  DBUG_RETURN(0);
 }
 
 

sql/sql_class.cc

@@ -223,6 +223,9 @@ THD::THD()
   cuted_fields= sent_row_count= 0L;
   limit_found_rows= 0;
   statement_id_counter= 0UL;
+#ifdef ERROR_INJECT_SUPPORT
+  error_inject_value= 0UL;
+#endif
   // Must be reset to handle error with THD's created for init of mysqld
   lex->current_select= 0;
   start_time=(time_t) 0;

sql/sql_class.h

@@ -1099,6 +1099,9 @@ public:
   query_id_t query_id, warn_id;
   ulong      thread_id, col_access;
 
+#ifdef ERROR_INJECT_SUPPORT
+  ulong      error_inject_value;
+#endif
   /* Statement id is thread-wide. This counter is used to generate ids */
   ulong      statement_id_counter;
   ulong	     rand_saved_seed1, rand_saved_seed2;

sql/sql_yacc.yy

@@ -3558,75 +3558,14 @@ part_definition:
           LEX *lex= Lex;
           partition_info *part_info= lex->part_info;
           partition_element *p_elem= new partition_element();
-          uint part_id= part_info->partitions.elements +
-                        part_info->temp_partitions.elements;
-          enum partition_state part_state;
+          uint part_id= part_info->partitions.elements;
 
-          if (part_info->part_state)
-            part_state= (enum partition_state)part_info->part_state[part_id];
-          else
-            part_state= PART_NORMAL;
-          switch (part_state)
+          if (!p_elem || part_info->partitions.push_back(p_elem))
           {
-            case PART_TO_BE_DROPPED:
-            /*
-              This part is currently removed so we keep it in a
-              temporary list for REPAIR TABLE to be able to handle
-              failures during drop partition process.
-            */
-            case PART_TO_BE_ADDED:
-            /*
-              This part is currently being added so we keep it in a
-              temporary list for REPAIR TABLE to be able to handle
-              failures during add partition process.
-            */
-              if (!p_elem || part_info->temp_partitions.push_back(p_elem))
-              {
-                mem_alloc_error(sizeof(partition_element));
-                YYABORT;
-              }
-              break;
-            case PART_IS_ADDED:
-            /*
-              Part has been added and is now a normal partition
-            */
-            case PART_TO_BE_REORGED:
-            /*
-              This part is currently reorganised, it is still however
-              used so we keep it in the list of partitions. We do
-              however need the state to be able to handle REPAIR TABLE
-              after failures in the reorganisation process.
-            */
-            case PART_REORGED_DROPPED:
-            /*
-              This part is currently reorganised as part of a
-              COALESCE PARTITION and it will be dropped without a new
-              replacement partition after completing the reorganisation.
-            */
-            case PART_CHANGED:
-            /*
-              This part is currently split or merged as part of ADD
-              PARTITION for a hash partition or as part of COALESCE
-              PARTITION for a hash partitioned table.
-            */
-            case PART_IS_CHANGED:
-            /*
-              This part has been split or merged as part of ADD
-              PARTITION for a hash partition or as part of COALESCE
-              PARTITION for a hash partitioned table.
-            */
-            case PART_NORMAL:
-              if (!p_elem || part_info->partitions.push_back(p_elem))
-              {
-                mem_alloc_error(sizeof(partition_element));
-                YYABORT;
-              }
-              break;
-            default:
-              mem_alloc_error((part_id * 1000) + part_state);
-              YYABORT;
+            mem_alloc_error(sizeof(partition_element));
+            YYABORT;
           }
-          p_elem->part_state= part_state;
+          p_elem->part_state= PART_NORMAL;
           part_info->curr_part_elem= p_elem;
           part_info->current_partition= p_elem;
           part_info->use_default_partitions= FALSE;

sql/table.cc

@@ -667,36 +667,17 @@ static int open_binary_frm(THD *thd, TABLE_SHARE *share, uchar *head,
 #endif
       next_chunk+= 5 + partition_info_len;
     }
-    if (share->mysql_version > 50105 && next_chunk + 5 < buff_end)
+#if MYSQL_VERSION_ID < 50200
+    if (share->mysql_version >= 50106 && share->mysql_version <= 50109)
     {
       /*
-        Partition state was introduced to support partition management in version 5.1.5
+         Partition state array was here in version 5.1.6 to 5.1.9, this code
+         makes it possible to load a 5.1.6 table in later versions. Can most
+         likely be removed at some point in time. Will only be used for
+         upgrades within 5.1 series of versions. Upgrade to 5.2 can only be
+         done from newer 5.1 versions.
       */
-      uint32 part_state_len= uint4korr(next_chunk);
-#ifdef WITH_PARTITION_STORAGE_ENGINE
-      if ((share->part_state_len= part_state_len))
-        if (!(share->part_state=
-              (uchar*) memdup_root(&share->mem_root, next_chunk + 4,
-                                   part_state_len)))
-        {
-          my_free(buff, MYF(0));
-          goto err;
-        }
-#else
-      if (part_state_len)
-      {
-        DBUG_PRINT("info", ("WITH_PARTITION_STORAGE_ENGINE is not defined"));
-        my_free(buff, MYF(0));
-        goto err;
-      }
-#endif
-      next_chunk+= 4 + part_state_len;
-    }
-#ifdef WITH_PARTITION_STORAGE_ENGINE
-    else
-    {
-      share->part_state_len= 0;
-      share->part_state= NULL;
+      next_chunk+= 4;
     }
 #endif
     keyinfo= share->key_info;

sql/unireg.cc

@@ -136,7 +136,6 @@ bool mysql_create_frm(THD *thd, const char *file_name,
   if (part_info)
   {
     create_info->extra_size+= part_info->part_info_len;
-    create_info->extra_size+= part_info->part_state_len;
   }
 #endif
 
@@ -209,12 +208,6 @@ bool mysql_create_frm(THD *thd, const char *file_name,
         my_write(file, (const byte*)part_info->part_info_string,
                  part_info->part_info_len + 1, MYF_RW))
       goto err;
-    DBUG_PRINT("info", ("Part state len = %d", part_info->part_state_len));
-    int4store(buff, part_info->part_state_len);
-    if (my_write(file, (const byte*)buff, 4, MYF_RW) ||
-        my_write(file, (const byte*)part_info->part_state,
-                 part_info->part_state_len, MYF_RW))
-      goto err;
   }
   else
 #endif
@@ -330,7 +323,7 @@ int rea_create_table(THD *thd, const char *path,
 
   // Make sure mysql_create_frm din't remove extension
   DBUG_ASSERT(*fn_rext(frm_name));
-  if (file->create_handler_files(path, create_info))
+  if (file->create_handler_files(path, NULL, CHF_CREATE_FLAG, create_info))
     goto err_handler;
   if (!create_info->frm_only && ha_create_table(thd, path, db, table_name,
                                                 create_info,0))