Merge bk-internal.mysql.com:/home/bk/mysql-5.1-new

into serg.mylan:/usr/home/serg/Abk/mysql-5.1

client/client_priv.h

@@ -53,9 +53,8 @@ enum options_client
   OPT_MYSQL_ONLY_PRINT,
   OPT_MYSQL_LOCK_DIRECTORY,
   OPT_MYSQL_SLAP_SLAVE,
-  OPT_MYSQL_NUMBER_OF_QUERY, OPT_MYSQL_NUMBER_OF_ROWS,
-  OPT_MYSQL_REPEAT_DATA, OPT_MYSQL_REPEAT_QUERY,
-  OPT_MYSQL_PRESERVE_SCHEMA_ENTER, OPT_MYSQL_PRESERVE_SCHEMA_EXIT,
+  OPT_MYSQL_NUMBER_OF_QUERY,
+  OPT_MYSQL_PRESERVE_SCHEMA,
   OPT_IGNORE_TABLE,OPT_INSERT_IGNORE,OPT_SHOW_WARNINGS,OPT_DROP_DATABASE,
   OPT_TZ_UTC, OPT_AUTO_CLOSE, OPT_CREATE_SLAP_SCHEMA,
   OPT_MYSQL_REPLACE_INTO, OPT_BASE64_OUTPUT, OPT_SERVER_ID

client/mysqlbinlog.cc

@@ -663,7 +663,8 @@ end:
 
 static struct my_option my_long_options[] =
 {
-
+  {"help", '?', "Display this help and exit.",
+   0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0},
 #ifdef __NETWARE__
   {"autoclose", OPT_AUTO_CLOSE, "Auto close the screen on exit for Netware.",
    0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0},
@@ -683,13 +684,13 @@ static struct my_option my_long_options[] =
   {"character-sets-dir", OPT_CHARSETS_DIR,
    "Directory where character sets are.", (gptr*) &charsets_dir,
    (gptr*) &charsets_dir, 0, GET_STR, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
+  {"database", 'd', "List entries for just this database (local log only).",
+   (gptr*) &database, (gptr*) &database, 0, GET_STR_ALLOC, REQUIRED_ARG,
+   0, 0, 0, 0, 0, 0},
 #ifndef DBUG_OFF
   {"debug", '#', "Output debug log.", (gptr*) &default_dbug_option,
    (gptr*) &default_dbug_option, 0, GET_STR, OPT_ARG, 0, 0, 0, 0, 0, 0},
 #endif
-  {"database", 'd', "List entries for just this database (local log only).",
-   (gptr*) &database, (gptr*) &database, 0, GET_STR_ALLOC, REQUIRED_ARG,
-   0, 0, 0, 0, 0, 0},
   {"disable-log-bin", 'D', "Disable binary log. This is useful, if you "
     "enabled --to-last-log and are sending the output to the same MySQL server. "
     "This way you could avoid an endless loop. You would also like to use it "
@@ -700,13 +701,14 @@ static struct my_option my_long_options[] =
   {"force-read", 'f', "Force reading unknown binlog events.",
    (gptr*) &force_opt, (gptr*) &force_opt, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0,
    0, 0},
-  {"help", '?', "Display this help and exit.",
-   0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0},
   {"hexdump", 'H', "Augment output with hexadecimal and ASCII event dump.",
    (gptr*) &opt_hexdump, (gptr*) &opt_hexdump, 0, GET_BOOL, NO_ARG,
    0, 0, 0, 0, 0, 0},
   {"host", 'h', "Get the binlog from server.", (gptr*) &host, (gptr*) &host,
    0, GET_STR_ALLOC, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
+  {"local-load", 'l', "Prepare local temporary files for LOAD DATA INFILE in the specified directory.",
+   (gptr*) &dirname_for_local_load, (gptr*) &dirname_for_local_load, 0,
+   GET_STR_ALLOC, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
   {"offset", 'o', "Skip the first N entries.", (gptr*) &offset, (gptr*) &offset,
    0, GET_ULL, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
   {"password", 'p', "Password to connect to remote server.",
@@ -722,15 +724,15 @@ static struct my_option my_long_options[] =
   {"protocol", OPT_MYSQL_PROTOCOL,
    "The protocol of connection (tcp,socket,pipe,memory).",
    0, 0, 0, GET_STR,  REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
-  {"result-file", 'r', "Direct output to a given file.", 0, 0, 0, GET_STR,
-   REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
   {"read-from-remote-server", 'R', "Read binary logs from a MySQL server",
    (gptr*) &remote_opt, (gptr*) &remote_opt, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0,
    0, 0},
-  {"open_files_limit", OPT_OPEN_FILES_LIMIT,
-   "Used to reserve file descriptors for usage by this program",
-   (gptr*) &open_files_limit, (gptr*) &open_files_limit, 0, GET_ULONG,
-   REQUIRED_ARG, MY_NFILE, 8, OS_FILE_LIMIT, 0, 1, 0},
+  {"result-file", 'r', "Direct output to a given file.", 0, 0, 0, GET_STR,
+   REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
+  {"server-id", OPT_SERVER_ID,
+   "Extract only binlog entries created by the server having the given id.",
+   (gptr*) &server_id, (gptr*) &server_id, 0, GET_ULONG,
+   REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
   {"short-form", 's', "Just show the queries, no extra info.",
    (gptr*) &short_form, (gptr*) &short_form, 0, GET_BOOL, NO_ARG, 0, 0, 0, 0,
    0, 0},
@@ -745,6 +747,13 @@ static struct my_option my_long_options[] =
    "(you should probably use quotes for your shell to set it properly).",
    (gptr*) &start_datetime_str, (gptr*) &start_datetime_str,
    0, GET_STR_ALLOC, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
+  {"start-position", OPT_START_POSITION,
+   "Start reading the binlog at position N. Applies to the first binlog "
+   "passed on the command line.",
+   (gptr*) &start_position, (gptr*) &start_position, 0, GET_ULL,
+   REQUIRED_ARG, BIN_LOG_HEADER_SIZE, BIN_LOG_HEADER_SIZE,
+   /* COM_BINLOG_DUMP accepts only 4 bytes for the position */
+   (ulonglong)(~(uint32)0), 0, 0, 0},
   {"stop-datetime", OPT_STOP_DATETIME,
    "Stop reading the binlog at first event having a datetime equal or "
    "posterior to the argument; the argument must be a date and time "
@@ -753,24 +762,12 @@ static struct my_option my_long_options[] =
    "(you should probably use quotes for your shell to set it properly).",
    (gptr*) &stop_datetime_str, (gptr*) &stop_datetime_str,
    0, GET_STR_ALLOC, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
-  {"start-position", OPT_START_POSITION,
-   "Start reading the binlog at position N. Applies to the first binlog "
-   "passed on the command line.",
-   (gptr*) &start_position, (gptr*) &start_position, 0, GET_ULL,
-   REQUIRED_ARG, BIN_LOG_HEADER_SIZE, BIN_LOG_HEADER_SIZE,
-   /* COM_BINLOG_DUMP accepts only 4 bytes for the position */
-   (ulonglong)(~(uint32)0), 0, 0, 0},
   {"stop-position", OPT_STOP_POSITION,
    "Stop reading the binlog at position N. Applies to the last binlog "
    "passed on the command line.",
    (gptr*) &stop_position, (gptr*) &stop_position, 0, GET_ULL,
    REQUIRED_ARG, (ulonglong)(~(my_off_t)0), BIN_LOG_HEADER_SIZE,
    (ulonglong)(~(my_off_t)0), 0, 0, 0},
-  {"server-id", OPT_SERVER_ID,
-   "Only extract binlog entries created by a certain server id "
-   "passed on the command line.",
-   (gptr*) &server_id, (gptr*) &server_id, 0, GET_ULONG,
-   REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
   {"to-last-log", 't', "Requires -R. Will not stop at the end of the \
 requested binlog but rather continue printing until the end of the last \
 binlog of the MySQL server. If you send the output to the same MySQL server, \
@@ -780,11 +777,12 @@ that may lead to an endless loop.",
   {"user", 'u', "Connect to the remote server as username.",
    (gptr*) &user, (gptr*) &user, 0, GET_STR_ALLOC, REQUIRED_ARG, 0, 0, 0, 0,
    0, 0},
-  {"local-load", 'l', "Prepare local temporary files for LOAD DATA INFILE in the specified directory.",
-   (gptr*) &dirname_for_local_load, (gptr*) &dirname_for_local_load, 0,
-   GET_STR_ALLOC, REQUIRED_ARG, 0, 0, 0, 0, 0, 0},
   {"version", 'V', "Print version and exit.", 0, 0, 0, GET_NO_ARG, NO_ARG, 0,
    0, 0, 0, 0, 0},
+  {"open_files_limit", OPT_OPEN_FILES_LIMIT,
+   "Used to reserve file descriptors for usage by this program",
+   (gptr*) &open_files_limit, (gptr*) &open_files_limit, 0, GET_ULONG,
+   REQUIRED_ARG, MY_NFILE, 8, OS_FILE_LIMIT, 0, 1, 0},
   {0, 0, 0, 0, 0, 0, GET_NO_ARG, NO_ARG, 0, 0, 0, 0, 0, 0}
 };
 

include/config-win.h

@@ -22,6 +22,11 @@ functions */
 #define _WIN32_WINNT     0x0500
 #endif
 
+#if defined(_MSC_VER) && _MSC_VER >= 1400
+/* Avoid endless warnings about sprintf() etc. being unsafe. */
+#define _CRT_SECURE_NO_DEPRECATE 1
+#endif
+
 #include <sys/locking.h>
 #include <windows.h>
 #include <math.h>			/* Because of rint() */
@@ -341,6 +346,11 @@ inline double ulonglong2double(ulonglong value)
 #define HAVE_SETFILEPOINTER
 #define HAVE_VIO_READ_BUFF
 
+#if defined(_WIN64) && defined(_M_X64)
+/* Avoid type conflicts with built-in functions. */
+#define HAVE_STRNLEN
+#endif
+
 #ifndef __NT__
 #undef FILE_SHARE_DELETE
 #define FILE_SHARE_DELETE 0     /* Not implemented on Win 98/ME */

include/hash.h

@@ -33,7 +33,7 @@ typedef void (*hash_free_key)(void *);
 
 typedef struct st_hash {
   uint key_offset,key_length;		/* Length of key if const length */
-  uint records,blength,current_record;
+  uint records, blength;
   uint flags;
   DYNAMIC_ARRAY array;				/* Place for hash_keys */
   hash_get_key get_key;
@@ -41,6 +41,9 @@ typedef struct st_hash {
   CHARSET_INFO *charset;
 } HASH;
 
+/* A search iterator state */
+typedef uint HASH_SEARCH_STATE;
+
 #define hash_init(A,B,C,D,E,F,G,H) _hash_init(A,B,C,D,E,F,G, H CALLER_INFO)
 my_bool _hash_init(HASH *hash, CHARSET_INFO *charset,
 		   uint default_array_elements, uint key_offset,
@@ -49,12 +52,15 @@ my_bool _hash_init(HASH *hash, CHARSET_INFO *charset,
 void hash_free(HASH *tree);
 void my_hash_reset(HASH *hash);
 byte *hash_element(HASH *hash,uint idx);
-gptr hash_search(HASH *info,const byte *key,uint length);
-gptr hash_next(HASH *info,const byte *key,uint length);
+gptr hash_search(const HASH *info, const byte *key, uint length);
+gptr hash_first(const HASH *info, const byte *key, uint length,
+                HASH_SEARCH_STATE *state);
+gptr hash_next(const HASH *info, const byte *key, uint length,
+               HASH_SEARCH_STATE *state);
 my_bool my_hash_insert(HASH *info,const byte *data);
 my_bool hash_delete(HASH *hash,byte *record);
 my_bool hash_update(HASH *hash,byte *record,byte *old_key,uint old_key_length);
-void hash_replace(HASH *hash, uint idx, byte *new_row);
+void hash_replace(HASH *hash, HASH_SEARCH_STATE *state, byte *new_row);
 my_bool hash_check(HASH *hash);			/* Only in debug library */
 
 #define hash_clear(H) bzero((char*) (H),sizeof(*(H)))

include/my_bitmap.h

@@ -17,7 +17,9 @@
 #ifndef _my_bitmap_h_
 #define _my_bitmap_h_
 
+#ifdef THREAD
 #include <my_pthread.h>
+#endif
 
 #define MY_BIT_NONE (~(uint) 0)
 

include/my_global.h

@@ -961,6 +961,7 @@ typedef off_t os_off_t;
 #define SOCKET_EAGAIN	WSAEINPROGRESS
 #define SOCKET_ETIMEDOUT WSAETIMEDOUT
 #define SOCKET_EWOULDBLOCK WSAEWOULDBLOCK
+#define SOCKET_EADDRINUSE WSAEADDRINUSE
 #define SOCKET_ENFILE	ENFILE
 #define SOCKET_EMFILE	EMFILE
 #elif defined(OS2)
@@ -969,6 +970,7 @@ typedef off_t os_off_t;
 #define SOCKET_EAGAIN	SOCEINPROGRESS
 #define SOCKET_ETIMEDOUT SOCKET_EINTR
 #define SOCKET_EWOULDBLOCK SOCEWOULDBLOCK
+#define SOCKET_EADDRINUSE SOCEADDRINUSE
 #define SOCKET_ENFILE	SOCENFILE
 #define SOCKET_EMFILE	SOCEMFILE
 #define closesocket(A)	soclose(A)
@@ -979,6 +981,7 @@ typedef off_t os_off_t;
 #define SOCKET_EAGAIN	EAGAIN
 #define SOCKET_ETIMEDOUT SOCKET_EINTR
 #define SOCKET_EWOULDBLOCK EWOULDBLOCK
+#define SOCKET_EADDRINUSE EADDRINUSE
 #define SOCKET_ENFILE	ENFILE
 #define SOCKET_EMFILE	EMFILE
 #endif

mysql-test/Makefile.am

@@ -49,7 +49,8 @@ dist-hook:
 	-$(INSTALL_DATA) $(srcdir)/t/*.imtest $(distdir)/t
 	$(INSTALL_DATA) $(srcdir)/t/*.sql $(distdir)/t
 	-$(INSTALL_DATA) $(srcdir)/t/*.disabled $(distdir)/t
-	$(INSTALL_DATA) $(srcdir)/t/*.opt $(srcdir)/t/*.sh $(srcdir)/t/*.slave-mi $(distdir)/t
+	$(INSTALL_DATA) $(srcdir)/t/*.opt $(srcdir)/t/*.slave-mi $(distdir)/t
+	$(INSTALL_SCRIPT) $(srcdir)/t/*.sh $(distdir)/t
 	$(INSTALL_DATA) $(srcdir)/extra/binlog_tests/*.test $(distdir)/extra/binlog_tests
 	$(INSTALL_DATA) $(srcdir)/extra/rpl_tests/*.test $(distdir)/extra/rpl_tests
 	-$(INSTALL_DATA) $(srcdir)/extra/binlog_tests/*.opt $(distdir)/extra/binlog_tests

mysql-test/extra/rpl_tests/rpl_loaddata_m.test

-# See if the master logs LOAD DATA INFILE correctly when binlog_*_db rules
-# exist.
-# This is for BUG#1100 (LOAD DATA INFILE was half-logged).
-
-
--- source include/master-slave.inc
-
---disable_warnings
-drop database if exists mysqltest;
---enable_warnings
-
-connection slave;
-stop slave; # don't need slave for this test
-
-# Test logging on master
-
-connection master;
-# 'test' is the current database
-create database mysqltest;
-use mysqltest;
-create table t1(a int, b int, unique(b));
-load data infile '../../std_data/rpl_loaddata.dat' into table t1;
-# Starting from 5.0.3 LOAD DATA is replicated much in the same way as ordinary
-# query so "show binlog ..." should show two events (before 5.0.3 no events
-# were returned).
---replace_column 2 # 5 #
-show binlog events from 102;
-drop database mysqltest;

mysql-test/extra/rpl_tests/rpl_row_blob.test

+#################################################
+# Author: JBM
+# Date: 2006-01-06
+# Purpose: Test test that BLOBs are replicated 
+#           correctly.
+################################################
+
+# Includes
+-- source include/have_binlog_format_row.inc
+-- source include/master-slave.inc
+
+# Pre test clean up section
+connection master;
+--disable_warnings
+DROP TABLE IF EXISTS test.t1;
+DROP TABLE IF EXISTS test.t2;
+--enable_warnings
+
+# Start test section
+--echo *****  Table Create Section ****
+--echo
+--disable_warnings
+--replace_result $engine_type engine_type
+CREATE TABLE test.t1 (c1 int not null auto_increment, 
+data LONGBLOB, PRIMARY KEY(c1))ENGINE=$engine_type;
+--enable_warnings
+--echo
+
+--echo **** Data Insert Section test.t1 *****
+--echo
+INSERT INTO test.t1 VALUES (NULL, NULL);
+INSERT INTO test.t1 VALUES (NULL, repeat('a',1*1024));
+INSERT INTO test.t1 VALUES (NULL, repeat('b',16*1024));
+CHECK TABLE test.t1;
+--echo
+
+--echo **** Data Insert Validation Master Section test.t1 ****
+--echo
+SELECT LENGTH(data) FROM test.t1 WHERE c1 = 1;
+SELECT LENGTH(data) FROM test.t1 WHERE c1 = 2;
+SELECT LENGTH(data) FROM test.t1 WHERE c1 = 3;
+save_master_pos;
+connection slave;
+sync_with_master; 
+--echo
+--echo **** Data Insert Validation Slave Section test.t1 ****
+--echo
+SELECT LENGTH(data) FROM test.t1 WHERE c1 = 1;
+SELECT LENGTH(data) FROM test.t1 WHERE c1 = 2;
+SELECT LENGTH(data) FROM test.t1 WHERE c1 = 3;
+connection master;
+--echo
+
+--echo **** Data Update Section test.t1 ****
+--echo
+UPDATE test.t1 set data=repeat('a',18*1024) where c1 = 1;
+UPDATE t1 set data=repeat('c',17*1024) where c1 = 2;
+--echo
+
+--echo **** Data Update Validation Master Section test.t1 ****
+--echo
+SELECT LENGTH(data) FROM test.t1 WHERE c1 = 1;
+SELECT LENGTH(data) FROM test.t1 WHERE c1 = 2;
+save_master_pos;
+connection slave;
+sync_with_master; 
+--echo
+--echo **** Data Update Validation Slave Section test.t1 ****
+--echo
+SELECT LENGTH(data) FROM test.t1 WHERE c1 = 1;
+SELECT LENGTH(data) FROM test.t1 WHERE c1 = 2;
+connection master;
+--echo
+--echo **** End Test Section test.t1 ****
+--echo
+
+--echo **** Create Table test.t2 ****
+--echo
+--disable_warnings
+--replace_result $engine_type engine_type
+CREATE TABLE test.t2 (
+  c1 INT NOT NULL PRIMARY KEY,
+  c2 TEXT,
+  c3 INT,
+  c4 LONGBLOB,
+  KEY(c3))ENGINE=$engine_type;
+--enable_warnings
+--echo
+
+--echo *** Setup Values For test.t2 ***
+# x0 size 256 (current inline size)
+set @x0 = '01234567012345670123456701234567';
+set @x0 = concat(@x0,@x0,@x0,@x0,@x0,@x0,@x0,@x0);
+
+# b1 length 2000+256 (blob part aligned)
+set @b1 = 'b1';
+set @b1 = concat(@b1,@b1,@b1,@b1,@b1,@b1,@b1,@b1,@b1,@b1);
+set @b1 = concat(@b1,@b1,@b1,@b1,@b1,@b1,@b1,@b1,@b1,@b1);
+set @b1 = concat(@b1,@b1,@b1,@b1,@b1,@b1,@b1,@b1,@b1,@b1);
+set @b1 = concat(@b1,@x0);
+# d1 length 3000
+set @d1 = 'dd1';
+set @d1 = concat(@d1,@d1,@d1,@d1,@d1,@d1,@d1,@d1,@d1,@d1);
+set @d1 = concat(@d1,@d1,@d1,@d1,@d1,@d1,@d1,@d1,@d1,@d1);
+set @d1 = concat(@d1,@d1,@d1,@d1,@d1,@d1,@d1,@d1,@d1,@d1);
+
+# b2 length 20000
+set @b2 = 'b2';
+set @b2 = concat(@b2,@b2,@b2,@b2,@b2,@b2,@b2,@b2,@b2,@b2);
+set @b2 = concat(@b2,@b2,@b2,@b2,@b2,@b2,@b2,@b2,@b2,@b2);
+set @b2 = concat(@b2,@b2,@b2,@b2,@b2,@b2,@b2,@b2,@b2,@b2);
+set @b2 = concat(@b2,@b2,@b2,@b2,@b2,@b2,@b2,@b2,@b2,@b2);
+
+# d2 length 30000
+set @d2 = 'dd2';
+set @d2 = concat(@d2,@d2,@d2,@d2,@d2,@d2,@d2,@d2,@d2,@d2);
+set @d2 = concat(@d2,@d2,@d2,@d2,@d2,@d2,@d2,@d2,@d2,@d2);
+set @d2 = concat(@d2,@d2,@d2,@d2,@d2,@d2,@d2,@d2,@d2,@d2);
+set @d2 = concat(@d2,@d2,@d2,@d2,@d2,@d2,@d2,@d2,@d2,@d2);
+--echo
+
+--echo **** Data Insert Section test.t2 *****
+--echo
+INSERT INTO test.t2 VALUES(1,@b1,111,@d1);
+INSERT INTO test.t2 VALUES(2,@b2,222,@d2);
+--echo
+
+--echo **** Data Insert Validation Master Section test.t2 ****
+--echo
+SELECT c1, LENGTH(c2), SUBSTR(c2,1+2*900,2), LENGTH(c4), SUBSTR(c4,1+3*900,3)
+FROM test.t2 WHERE c1=1;
+SELECT c1, LENGTH(c2), SUBSTR(c2,1+2*900,2), LENGTH(c4), SUBSTR(c4,1+3*900,3)
+FROM test.t2 WHERE c1=2;
+save_master_pos;
+connection slave;
+sync_with_master; 
+--echo
+--echo **** Data Insert Validation Slave Section test.t2 ****
+--echo
+SELECT c1, LENGTH(c2), SUBSTR(c2,1+2*900,2), LENGTH(c4), SUBSTR(c4,1+3*900,3)
+FROM test.t2 WHERE c1=1;
+SELECT c1, LENGTH(c2), SUBSTR(c2,1+2*900,2), LENGTH(c4), SUBSTR(c4,1+3*900,3)
+FROM test.t2 WHERE c1=2;
+connection master;
+--echo
+
+--echo **** Data Update Section test.t2 ****
+--echo
+UPDATE test.t2 SET c2=@b2, c4=@d2 WHERE c1=1;
+UPDATE test.t2 SET c2=@b1, c4=@d1 WHERE c1=2;
+--echo
+
+--echo **** Data Update Validation Master Section test.t2 ****
+--echo
+SELECT c1, LENGTH(c2), SUBSTR(c2,1+2*900,2), LENGTH(c4), SUBSTR(c4,1+3*900,3)
+FROM test.t2 WHERE c1=1;
+SELECT c1, LENGTH(c2), SUBSTR(c2,1+2*900,2), LENGTH(c4), SUBSTR(c4,1+3*900,3)
+FROM test.t2 WHERE c1=2;
+save_master_pos;
+connection slave;
+sync_with_master; 
+--echo
+--echo **** Data Update Validation Slave Section test.t2 ****
+--echo
+SELECT c1, LENGTH(c2), SUBSTR(c2,1+2*900,2), LENGTH(c4), SUBSTR(c4,1+3*900,3)
+FROM test.t2 WHERE c1=1;
+SELECT c1, LENGTH(c2), SUBSTR(c2,1+2*900,2), LENGTH(c4), SUBSTR(c4,1+3*900,3)
+FROM test.t2 WHERE c1=2;
+connection master;
+--echo
+
+# Post test clean up section
+--exec $MYSQL_DUMP --compact --order-by-primary --skip-extended-insert --no-create-info test > ./var/tmp/rpl_row_blob_master.sql
+--exec $MYSQL_DUMP_SLAVE --compact --order-by-primary --skip-extended-insert --no-create-info test > ./var/tmp/rpl_row_blob_slave.sql
+
+--exec diff ./var/tmp/rpl_row_blob_master.sql ./var/tmp/rpl_row_blob_slave.sql
+
+DROP TABLE IF EXISTS test.t1;
+DROP TABLE IF EXISTS test.t2;

mysql-test/lib/mtr_process.pl

@@ -890,7 +890,14 @@ sub mtr_exit ($) {
 #  cluck("Called mtr_exit()");
   mtr_timer_stop_all($::glob_timers);
   local $SIG{HUP} = 'IGNORE';
-  kill('HUP', -$$);
+  # ToDo: Signalling -$$ will only work if we are the process group
+  # leader (in fact on QNX it will signal our session group leader,
+  # which might be Do-compile or Pushbuild, causing tests to be
+  # aborted). So we only do it if we are the group leader. We might
+  # set ourselves as the group leader at startup (with
+  # POSIX::setpgrp(0,0)), but then care must be needed to always do
+  # proper child process cleanup.
+  kill('HUP', -$$) if $$ == getpgrp();
   sleep 2;
   exit($code);
 }

mysql-test/mysql-test-run.pl

@@ -805,6 +805,12 @@ sub command_line_setup () {
     }
   }
 
+  # On QNX, /tmp/dir/master.sock and /tmp/dir//master.sock seem to be
+  # considered different, so avoid the extra slash (/) in the socket
+  # paths.
+  my $sockdir = $opt_tmpdir;
+  $sockdir =~ s|/+$||;
+
   # Put this into a hash, will be a C struct
 
   $master->[0]=
@@ -813,7 +819,7 @@ sub command_line_setup () {
    path_myerr    => "$opt_vardir/log/master.err",
    path_mylog    => "$opt_vardir/log/master.log",
    path_mypid    => "$opt_vardir/run/master.pid",
-   path_mysock   => "$opt_tmpdir/master.sock",
+   path_mysock   => "$sockdir/master.sock",
    path_myport   =>  $opt_master_myport,
    start_timeout =>  400, # enough time create innodb tables
 
@@ -826,7 +832,7 @@ sub command_line_setup () {
    path_myerr    => "$opt_vardir/log/master1.err",
    path_mylog    => "$opt_vardir/log/master1.log",
    path_mypid    => "$opt_vardir/run/master1.pid",
-   path_mysock   => "$opt_tmpdir/master1.sock",
+   path_mysock   => "$sockdir/master1.sock",
    path_myport   => $opt_master_myport + 1,
    start_timeout => 400, # enough time create innodb tables
   };
@@ -837,7 +843,7 @@ sub command_line_setup () {
    path_myerr    => "$opt_vardir/log/slave.err",
    path_mylog    => "$opt_vardir/log/slave.log",
    path_mypid    => "$opt_vardir/run/slave.pid",
-   path_mysock   => "$opt_tmpdir/slave.sock",
+   path_mysock   => "$sockdir/slave.sock",
    path_myport   => $opt_slave_myport,
    start_timeout => 400,
   };
@@ -848,7 +854,7 @@ sub command_line_setup () {
    path_myerr    => "$opt_vardir/log/slave1.err",
    path_mylog    => "$opt_vardir/log/slave1.log",
    path_mypid    => "$opt_vardir/run/slave1.pid",
-   path_mysock   => "$opt_tmpdir/slave1.sock",
+   path_mysock   => "$sockdir/slave1.sock",
    path_myport   => $opt_slave_myport + 1,
    start_timeout => 300,
   };
@@ -859,7 +865,7 @@ sub command_line_setup () {
    path_myerr    => "$opt_vardir/log/slave2.err",
    path_mylog    => "$opt_vardir/log/slave2.log",
    path_mypid    => "$opt_vardir/run/slave2.pid",
-   path_mysock   => "$opt_tmpdir/slave2.sock",
+   path_mysock   => "$sockdir/slave2.sock",
    path_myport   => $opt_slave_myport + 2,
    start_timeout => 300,
   };
@@ -869,7 +875,7 @@ sub command_line_setup () {
    path_err =>        "$opt_vardir/log/im.err",
    path_log =>        "$opt_vardir/log/im.log",
    path_pid =>        "$opt_vardir/run/im.pid",
-   path_sock =>       "$opt_tmpdir/im.sock",
+   path_sock =>       "$sockdir/im.sock",
    port =>            $im_port,
    start_timeout =>   $master->[0]->{'start_timeout'},
    admin_login =>     'im_admin',
@@ -884,7 +890,7 @@ sub command_line_setup () {
    server_id    => 1,
    port         => $im_mysqld1_port,
    path_datadir => "$opt_vardir/im_mysqld_1.data",
-   path_sock    => "$opt_tmpdir/mysqld_1.sock",
+   path_sock    => "$sockdir/mysqld_1.sock",
    path_pid     => "$opt_vardir/run/mysqld_1.pid",
   };
 
@@ -893,7 +899,7 @@ sub command_line_setup () {
    server_id    => 2,
    port         => $im_mysqld2_port,
    path_datadir => "$opt_vardir/im_mysqld_2.data",
-   path_sock    => "$opt_tmpdir/mysqld_2.sock",
+   path_sock    => "$sockdir/mysqld_2.sock",
    path_pid     => "$opt_vardir/run/mysqld_2.pid",
    nonguarded   => 1,
   };
@@ -2503,7 +2509,8 @@ sub run_mysqltest ($) {
   {
     $cmdline_mysqlslap= "$exe_mysqlslap -uroot " .
                          "--port=$master->[0]->{'path_myport'} " .
-                         "--socket=$master->[0]->{'path_mysock'} --password=";
+                         "--socket=$master->[0]->{'path_mysock'} --password= " .
+                         "--lock-directory=$opt_tmpdir";
     if ( $opt_debug )
     {
       $cmdline_mysqlslap .=

mysql-test/r/bdb.result

@@ -1957,4 +1957,9 @@ d varchar(255) character set utf8,
 e varchar(255) character set utf8,
 key (a,b,c,d,e)) engine=bdb;
 ERROR 42000: Specified key was too long; max key length is 3072 bytes
+set autocommit=0;
+create table t1 (a int) engine=bdb;
+commit;
+alter table t1 add primary key(a);
+drop table t1;
 End of 5.0 tests

mysql-test/r/binlog_stm_blackhole.result

@@ -121,6 +121,7 @@ master-bin.000001	#	Query	1	#	use `test`; replace into t1 values(100)
 master-bin.000001	#	Query	1	#	use `test`; COMMIT
 master-bin.000001	#	Query	1	#	use `test`; create table t2 (a varchar(200)) engine=blackhole
 master-bin.000001	#	Begin_load_query	1	#	;file_id=1;block_len=581
+master-bin.000001	#	Query	1	#	use `test`; COMMIT
 master-bin.000001	#	Execute_load_query	1	#	use `test`; load data infile '../../std_data/words.dat' into table t2 ;file_id=1
 master-bin.000001	#	Query	1	#	use `test`; COMMIT
 master-bin.000001	#	Query	1	#	use `test`; alter table t1 add b int

mysql-test/r/create.result

@@ -279,7 +279,6 @@ a	b
 create table if not exists t1 select 3 as 'a',4 as 'b';
 Warnings:
 Note	1050	Table 't1' already exists
-Warning	1364	Field 'a' doesn't have a default value
 create table if not exists t1 select 3 as 'a',3 as 'b';
 ERROR 23000: Duplicate entry '3' for key 1
 select * from t1;
@@ -635,8 +634,6 @@ create table t1 (
 a varchar(112) charset utf8 collate utf8_bin not null,
 primary key (a)
 ) select 'test' as a ;
-Warnings:
-Warning	1364	Field 'a' doesn't have a default value
 show create table t1;
 Table	Create Table
 t1	CREATE TABLE `t1` (
@@ -652,14 +649,39 @@ create table t1 (
 a varchar(12) charset utf8 collate utf8_bin not null, 
 b int not null, primary key (a)
 ) select a, 1 as b from t2 ;
+show create table t1;
+Table	Create Table
+t1	CREATE TABLE `t1` (
+  `a` varchar(12) character set utf8 collate utf8_bin NOT NULL,
+  `b` int(11) NOT NULL,
+  PRIMARY KEY  (`a`)
+) ENGINE=MyISAM DEFAULT CHARSET=latin1
+drop table t1;
+create table t1 ( 
+a varchar(12) charset utf8 collate utf8_bin not null, 
+b int not null, primary key (a)
+) select a, 1 as c from t2 ;
 Warnings:
-Warning	1364	Field 'a' doesn't have a default value
 Warning	1364	Field 'b' doesn't have a default value
 show create table t1;
 Table	Create Table
 t1	CREATE TABLE `t1` (
-  `a` varchar(12) character set utf8 collate utf8_bin NOT NULL,
   `b` int(11) NOT NULL,
+  `a` varchar(12) character set utf8 collate utf8_bin NOT NULL,
+  `c` bigint(1) NOT NULL default '0',
+  PRIMARY KEY  (`a`)
+) ENGINE=MyISAM DEFAULT CHARSET=latin1
+drop table t1;
+create table t1 ( 
+a varchar(12) charset utf8 collate utf8_bin not null, 
+b int null, primary key (a)
+) select a, 1 as c from t2 ;
+show create table t1;
+Table	Create Table
+t1	CREATE TABLE `t1` (
+  `b` int(11) default NULL,
+  `a` varchar(12) character set utf8 collate utf8_bin NOT NULL,
+  `c` bigint(1) NOT NULL default '0',
   PRIMARY KEY  (`a`)
 ) ENGINE=MyISAM DEFAULT CHARSET=latin1
 drop table t1;
@@ -667,9 +689,6 @@ create table t1 (
 a varchar(12) charset utf8 collate utf8_bin not null,
 b int not null, primary key (a)
 ) select 'a' as a , 1 as b from t2 ;
-Warnings:
-Warning	1364	Field 'a' doesn't have a default value
-Warning	1364	Field 'b' doesn't have a default value
 show create table t1;
 Table	Create Table
 t1	CREATE TABLE `t1` (
@@ -682,8 +701,6 @@ create table t1 (
 a varchar(12) charset utf8 collate utf8_bin,
 b int not null, primary key (a)
 ) select 'a' as a , 1 as b from t2 ;
-Warnings:
-Warning	1364	Field 'b' doesn't have a default value
 show create table t1;
 Table	Create Table
 t1	CREATE TABLE `t1` (
@@ -702,8 +719,6 @@ a1 varchar(12) charset utf8 collate utf8_bin not null,
 a2 int, a3 int, a4 int, a5 int, a6 int, a7 int, a8 int, a9 int,
 primary key (a1)
 ) select a1,a2,a3,a4,a5,a6,a7,a8,a9 from t1 ;
-Warnings:
-Warning	1364	Field 'a1' doesn't have a default value
 drop table t2;
 create table t2 ( 
 a1 varchar(12) charset utf8 collate utf8_bin,
@@ -719,8 +734,6 @@ a1 varchar(12) charset utf8 collate utf8_bin not null,
 a2 int, a3 int, a4 int, a5 int, a6 int, a7 int, a8 int, a9 int,
 primary key (a1)
 ) select a1,a2,a3,a4,a5,a6,a7,a8,a9 from t1 ;
-Warnings:
-Warning	1364	Field 'a1' doesn't have a default value
 drop table t2;
 create table t2 ( a int default 3, b int default 3)
 select a1,a2 from t1;

mysql-test/r/handler.result

-drop table if exists t1;
+drop table if exists t1,t3,t4,t5;
 create table t1 (a int, b char(10), key a(a), key b(a,b));
 insert into t1 values
 (17,"ddd"),(18,"eee"),(19,"fff"),(19,"yyy"),

mysql-test/r/information_schema.result

@@ -1077,6 +1077,22 @@ character_maximum_length	character_octet_length
 32	32
 64	64
 drop table t1;
+CREATE TABLE t1 (f1 BIGINT, f2 VARCHAR(20), f3 BIGINT);
+INSERT INTO t1 SET f1 = 1, f2 = 'Schoenenbourg', f3 = 1;
+CREATE FUNCTION func2() RETURNS BIGINT RETURN 1;
+CREATE FUNCTION func1() RETURNS BIGINT
+BEGIN
+RETURN ( SELECT COUNT(*) FROM INFORMATION_SCHEMA.VIEWS);
+END//
+CREATE VIEW v1 AS SELECT 1 FROM t1
+WHERE f3 = (SELECT func2 ());
+SELECT func1();
+func1()
+1
+DROP TABLE t1;
+DROP VIEW v1;
+DROP FUNCTION func1;
+DROP FUNCTION func2;
 select * from information_schema.engines WHERE ENGINE="MyISAM";
 ENGINE	SUPPORT	COMMENT	TRANSACTIONS	XA	SAVEPOINTS
 MyISAM	ENABLED	Default engine as of MySQL 3.23 with great performance	NO	NO	NO

mysql-test/r/kill.result

@@ -5,8 +5,6 @@ select ((@id := kill_id) - kill_id) from t1;
 ((@id := kill_id) - kill_id)
 0
 kill @id;
-select 1;
-Got one of the listed errors
 select ((@id := kill_id) - kill_id) from t1;
 ((@id := kill_id) - kill_id)
 0

mysql-test/r/mysqlshow.result

-DROP TABLE IF EXISTS t1,t2;
+DROP TABLE IF EXISTS t1,t2,test1,test2;
 CREATE TABLE t1 (a int);
 INSERT INTO t1 VALUES (1),(2),(3);
 CREATE TABLE t2 (a int, b int);

mysql-test/r/rpl_drop_db.result

@@ -31,5 +31,5 @@ use test;
 select * from t1;
 n
 1234
-drop table t1;
+DROP DATABASE mysqltest1;
 stop slave;

mysql-test/r/rpl_stm_err_ignoredtable.result → mysql-test/r/rpl_err_ignoredtable.result

@@ -5,13 +5,19 @@ reset slave;
 drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
 create table t1 (a int primary key);
+create table t4 (a int primary key);
 insert into t1 values (1),(1);
 ERROR 23000: Duplicate entry '1' for key 1
-show slave status;
-Slave_IO_State	Master_Host	Master_User	Master_Port	Connect_Retry	Master_Log_File	Read_Master_Log_Pos	Relay_Log_File	Relay_Log_Pos	Relay_Master_Log_File	Slave_IO_Running	Slave_SQL_Running	Replicate_Do_DB	Replicate_Ignore_DB	Replicate_Do_Table	Replicate_Ignore_Table	Replicate_Wild_Do_Table	Replicate_Wild_Ignore_Table	Last_Errno	Last_Error	Skip_Counter	Exec_Master_Log_Pos	Relay_Log_Space	Until_Condition	Until_Log_File	Until_Log_Pos	Master_SSL_Allowed	Master_SSL_CA_File	Master_SSL_CA_Path	Master_SSL_Cert	Master_SSL_Cipher	Master_SSL_Key	Seconds_Behind_Master
-#	127.0.0.1	root	MASTER_PORT	1	master-bin.000001	292	#	#	master-bin.000001	Yes	Yes				test.t3,test.t1,test.t2			0		0	292	#	None		0	No						#
+insert into t4 values (1),(2);
 show tables like 't1';
 Tables_in_test (t1)
+show tables like 't4';
+Tables_in_test (t4)
+t4
+SELECT * FROM test.t4;
+a
+1
+2
 drop table t1;
 select get_lock('crash_lock%20C', 10);
 get_lock('crash_lock%20C', 10)
@@ -26,14 +32,11 @@ select (@id := id) - id from t3;
 0
 kill @id;
 drop table t2,t3;
-show binlog events from 102;
-Log_name	Pos	Event_type	Server_id	End_log_pos	Info
-master-bin.000001	#	Query	1	#	use `test`; create table t1 (a int primary key)
-master-bin.000001	#	Query	1	#	use `test`; insert into t1 values (1),(1)
-master-bin.000001	#	Query	1	#	use `test`; drop table t1
-master-bin.000001	#	Query	1	#	use `test`; create table t2 (a int primary key)
-master-bin.000001	#	Query	1	#	use `test`; insert into t2 values(1)
-master-bin.000001	#	Query	1	#	use `test`; create table t3 (id int)
-master-bin.000001	#	Query	1	#	use `test`; insert into t3 values(connection_id())
-master-bin.000001	#	Query	1	#	use `test`; update t2 set a = a + 1 + get_lock('crash_lock%20C', 10)
-master-bin.000001	#	Query	1	#	use `test`; drop table t2,t3
+insert into t4 values (3),(4);
+SELECT * FROM test.t4;
+a
+1
+2
+3
+4
+DROP TABLE test.t4;

mysql-test/r/rpl_loaddata_m.result

+stop slave;
+drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
+reset master;
+reset slave;
+drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
+start slave;
+drop database if exists mysqltest;
+USE test;
+CREATE TABLE t1(a INT, b INT, UNIQUE(b));
+LOAD DATA INFILE '../../std_data/rpl_loaddata.dat' INTO TABLE test.t1;
+SELECT COUNT(*) FROM test.t1;
+COUNT(*)
+2
+CREATE DATABASE mysqltest;
+USE mysqltest;
+CREATE TABLE t1(a INT, b INT, UNIQUE(b));
+LOAD DATA INFILE '../../std_data/rpl_loaddata.dat' INTO TABLE mysqltest.t1;
+SELECT COUNT(*) FROM mysqltest.t1;
+COUNT(*)
+2
+SHOW DATABASES;
+Database
+information_schema
+mysql
+mysqltest
+test
+USE test;
+SHOW TABLES;
+Tables_in_test
+USE mysqltest;
+SHOW TABLES;
+Tables_in_mysqltest
+t1
+SELECT COUNT(*) FROM mysqltest.t1;
+COUNT(*)
+2
+DROP DATABASE mysqltest;
+DROP TABLE test.t1;

mysql-test/r/rpl_multi_engine.result

@@ -363,3 +363,4 @@ id	hex(b1)	vc	bc	d	f	total	y	t
 select id,hex(b1),vc,bc,d,f,total,y,t from t1 order by id;
 id	hex(b1)	vc	bc	d	f	total	y	t
 DROP TABLE t1;
+DROP DATABASE mysqltest1;

mysql-test/r/rpl_row_basic_11bugs.result

+stop slave;
+drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
+reset master;
+reset slave;
+drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
+start slave;
+CREATE DATABASE test_ignore;
+**** On Master ****
+SHOW DATABASES;
+Database
+information_schema
+mysql
+test
+test_ignore
+USE test;
+CREATE TABLE t1 (a INT, b INT);
+SHOW TABLES;
+Tables_in_test
+t1
+INSERT INTO t1 VALUES (1,1), (2,2);
+USE test_ignore;
+CREATE TABLE t2 (a INT, b INT);
+SHOW TABLES;
+Tables_in_test_ignore
+t2
+INSERT INTO t2 VALUES (3,3), (4,4);
+SHOW BINLOG EVENTS;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	4	Format_desc	1	102	Server ver: 5.1.5-alpha-debug-log, Binlog ver: 4
+master-bin.000001	102	Query	1	195	use `test`; CREATE TABLE t1 (a INT, b INT)
+master-bin.000001	195	Table_map	1	235	test.t1
+master-bin.000001	235	Write_rows	1	282	
+**** On Slave ****
+SHOW DATABASES;
+Database
+information_schema
+mysql
+test
+USE test;
+SHOW TABLES;
+Tables_in_test
+t1
+USE test_ignore;
+ERROR 42000: Unknown database 'test_ignore'
+DROP DATABASE test_ignore;

mysql-test/r/rpl_row_sp000.result

@@ -58,6 +58,9 @@ insert into t1 values (15);
 grant CREATE ROUTINE, EXECUTE on mysqltest1.* to "zedjzlcsjhd"@127.0.0.1;
 grant SELECT on mysqltest1.t1 to "zedjzlcsjhd"@127.0.0.1;
 grant SELECT, INSERT on mysqltest1.t2 to "zedjzlcsjhd"@127.0.0.1;
+SELECT 1;
+1
+1
 create procedure foo4()
 deterministic
 begin

mysql-test/r/rpl_stm_loaddata_m.result

-stop slave;
-drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
-reset master;
-reset slave;
-drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
-start slave;
-drop database if exists mysqltest;
-stop slave;
-create database mysqltest;
-use mysqltest;
-create table t1(a int, b int, unique(b));
-load data infile '../../std_data/rpl_loaddata.dat' into table t1;
-show binlog events from 102;
-Log_name	Pos	Event_type	Server_id	End_log_pos	Info
-master-bin.000001	#	Query	1	#	drop database if exists mysqltest
-master-bin.000001	#	Query	1	#	create database mysqltest
-master-bin.000001	#	Query	1	#	use `mysqltest`; create table t1(a int, b int, unique(b))
-master-bin.000001	#	Begin_load_query	1	#	;file_id=1;block_len=12
-master-bin.000001	#	Execute_load_query	1	#	use `mysqltest`; load data infile '../../std_data/rpl_loaddata.dat' into table t1 ;file_id=1
-drop database mysqltest;

mysql-test/r/rpl_stm_rewrt_db.result

-stop slave;
-drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
-reset master;
-reset slave;
-drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
-start slave;
-drop database if exists mysqltest1;
-create database mysqltest1;
-use mysqltest1;
-create table t1 (a int);
-insert into t1 values(9);
-select * from mysqltest1.t1;
-a
-9
-show databases like 'mysqltest1';
-Database (mysqltest1)
-mysqltest1
-select * from test.t1;
-a
-9
-drop table t1;
-drop database mysqltest1;
-drop database if exists rewrite;
-create database rewrite;
-use test;
-create table t1 (a date, b date, c date not null, d date);
-load data infile '../../std_data/loaddata1.dat' into table t1 fields terminated by ',';
-Warnings:
-Warning	1265	Data truncated for column 'a' at row 1
-Warning	1265	Data truncated for column 'c' at row 1
-Warning	1265	Data truncated for column 'd' at row 1
-Warning	1265	Data truncated for column 'a' at row 2
-Warning	1265	Data truncated for column 'b' at row 2
-Warning	1265	Data truncated for column 'd' at row 2
-load data infile '../../std_data/loaddata1.dat' into table t1 fields terminated by ',' IGNORE 2 LINES;
-select * from rewrite.t1;
-a	b	c	d
-0000-00-00	NULL	0000-00-00	0000-00-00
-0000-00-00	0000-00-00	0000-00-00	0000-00-00
-2003-03-03	2003-03-03	2003-03-03	NULL
-2003-03-03	2003-03-03	2003-03-03	NULL
-truncate table t1;
-load data infile '../../std_data/loaddata1.dat' into table t1 fields terminated by ',' LINES STARTING BY ',' (b,c,d);
-Warnings:
-Warning	1265	Data truncated for column 'c' at row 1
-Warning	1265	Data truncated for column 'd' at row 1
-Warning	1265	Data truncated for column 'b' at row 2
-Warning	1265	Data truncated for column 'd' at row 2
-select * from rewrite.t1;
-a	b	c	d
-NULL	NULL	0000-00-00	0000-00-00
-NULL	0000-00-00	0000-00-00	0000-00-00
-NULL	2003-03-03	2003-03-03	NULL
-drop table t1;
-create table t1 (a text, b text);
-load data infile '../../std_data/loaddata2.dat' into table t1 fields terminated by ',' enclosed by '''';
-Warnings:
-Warning	1261	Row 3 doesn't contain data for all columns
-select concat('|',a,'|'), concat('|',b,'|') from rewrite.t1;
-concat('|',a,'|')	concat('|',b,'|')
-|Field A|	|Field B|
-|Field 1|	|Field 2' 
-Field 3,'Field 4|
-|Field 5' ,'Field 6|	NULL
-|Field 6|	| 'Field 7'|
-drop table t1;
-create table t1 (a int, b char(10));
-load data infile '../../std_data/loaddata3.dat' into table t1 fields terminated by '' enclosed by '' ignore 1 lines;
-Warnings:
-Warning	1264	Out of range value for column 'a' at row 3
-Warning	1262	Row 3 was truncated; it contained more data than there were input columns
-Warning	1264	Out of range value for column 'a' at row 5
-Warning	1262	Row 5 was truncated; it contained more data than there were input columns
-select * from rewrite.t1;
-a	b
-1	row 1
-2	row 2
-0	1234567890
-3	row 3
-0	1234567890
-truncate table t1;
-load data infile '../../std_data/loaddata4.dat' into table t1 fields terminated by '' enclosed by '' lines terminated by '' ignore 1 lines;
-Warnings:
-Warning	1264	Out of range value for column 'a' at row 4
-Warning	1261	Row 4 doesn't contain data for all columns
-select * from rewrite.t1;
-a	b
-1	row 1
-2	row 2
-3	row 3
-0	
-drop database rewrite;
-drop table t1;

mysql-test/t/rpl_row_basic_11bugs-master.opt

+--binlog_ignore_db=test_ignore;

mysql-test/t/rpl_row_timezone-slave.opt

---default-time-zone=Europe/Moscow
-

mysql-test/t/rpl_stm_rewrt_db-slave.opt

-"--replicate-rewrite-db=test->rewrite" "--replicate-rewrite-db=mysqltest1->test"