merge mysql-5.5-bugteam(local) --> mysql-5.5-bugteam

include/my_sys.h

@@ -456,7 +456,8 @@ typedef struct st_io_cache		/* Used when cacheing files */
   IO_CACHE_CALLBACK pre_close;
   /*
     Counts the number of times, when we were forced to use disk. We use it to
-    increase the binlog_cache_disk_use status variable.
+    increase the binlog_cache_disk_use and binlog_stmt_cache_disk_use status
+    variables.
   */
   ulong disk_writes;
   void* arg;				/* for use by pre/post_read */

mysql-test/extra/binlog_tests/innodb_stat.test

-# Embedded server doesn't support binlog
--- source include/not_embedded.inc
--- source include/have_innodb.inc
-
-#
-# Let us test binlog_cache_use and binlog_cache_disk_use status vars.
-# Actually this test has nothing to do with innodb per se, it just requires
-# transactional table. 
-#
-flush status;
-show status like "binlog_cache_use";
-show status like "binlog_cache_disk_use";
---disable_warnings
-drop table if exists t1;
---enable_warnings
-
-create table t1 (a int) engine=innodb;
-
-# Now we are going to create transaction which is long enough so its 
-# transaction binlog will be flushed to disk...
-let $1=2000;
-disable_query_log;
-begin;
-while ($1)
-{
- eval insert into t1 values( $1 );
- dec $1;
-}
-commit;
-enable_query_log;
-show status like "binlog_cache_use";
-show status like "binlog_cache_disk_use";
-
-# Transaction which should not be flushed to disk and so should not
-# increase binlog_cache_disk_use.
-begin;
-delete from t1;
-commit;
-show status like "binlog_cache_use";
-show status like "binlog_cache_disk_use";
-drop table t1;

mysql-test/extra/rpl_tests/rpl_binlog_max_cache_size.test

@@ -25,11 +25,13 @@ call mtr.add_suppression("Unsafe statement written to the binary log using state
 
 let $old_max_binlog_cache_size= query_get_value(SHOW VARIABLES LIKE "max_binlog_cache_size", Value, 1);
 let $old_binlog_cache_size= query_get_value(SHOW VARIABLES LIKE "binlog_cache_size", Value, 1);
+let $old_max_binlog_stmt_cache_size= query_get_value(SHOW VARIABLES LIKE "max_binlog_stmt_cache_size", Value, 1);
+let $old_binlog_stmt_cache_size= query_get_value(SHOW VARIABLES LIKE "binlog_stmt_cache_size", Value, 1);
 
 SET GLOBAL max_binlog_cache_size = 4096;
-# Becuase of bug#55377, we have to set binlog_cache_size until the bug is
-# fixed.
 SET GLOBAL binlog_cache_size = 4096;
+SET GLOBAL max_binlog_stmt_cache_size = 4096;
+SET GLOBAL binlog_stmt_cache_size = 4096;
 disconnect master;
 connect (master,127.0.0.1,root,,test,$MASTER_MYPORT,);
 
@@ -47,14 +49,14 @@ connection master;
 
 --echo *** Single statement on transactional table ***
 --disable_query_log
---error ER_TRANS_CACHE_FULL, ER_ERROR_ON_WRITE
+--error ER_TRANS_CACHE_FULL, ER_STMT_CACHE_FULL, ER_ERROR_ON_WRITE
 eval INSERT INTO t1 (a, data) VALUES (1,
      CONCAT($data, $data, $data, $data, $data));
 --enable_query_log
 
 --echo *** Single statement on non-transactional table ***
 --disable_query_log
---error ER_TRANS_CACHE_FULL, ER_ERROR_ON_WRITE
+--error ER_TRANS_CACHE_FULL, ER_STMT_CACHE_FULL, ER_ERROR_ON_WRITE
 eval INSERT INTO t2 (a, data) VALUES (2,
        CONCAT($data, $data, $data, $data, $data, $data));
 --enable_query_log
@@ -74,7 +76,7 @@ eval INSERT INTO t2 (a, data) VALUES (5, $data);
 
 --echo *** Single statement on both transactional and non-transactional tables. ***
 --disable_query_log
---error ER_TRANS_CACHE_FULL, ER_ERROR_ON_WRITE
+--error ER_TRANS_CACHE_FULL, ER_STMT_CACHE_FULL, ER_ERROR_ON_WRITE
 eval UPDATE t2, t1 SET t2.data = CONCAT($data, $data, $data, $data),
                        t1.data = CONCAT($data, $data, $data, $data);
 --enable_query_log
@@ -103,11 +105,11 @@ BEGIN;
 --eval INSERT INTO t1 (a, data) VALUES (1, $data);
 --eval INSERT INTO t1 (a, data) VALUES (2, $data);
 --eval INSERT INTO t1 (a, data) VALUES (3, $data);
---error ER_TRANS_CACHE_FULL, ER_ERROR_ON_WRITE
+--error ER_TRANS_CACHE_FULL, ER_STMT_CACHE_FULL, ER_ERROR_ON_WRITE
 --eval INSERT INTO t1 (a, data) VALUES (4, $data);
---error ER_TRANS_CACHE_FULL, ER_ERROR_ON_WRITE
+--error ER_TRANS_CACHE_FULL, ER_STMT_CACHE_FULL, ER_ERROR_ON_WRITE
 --eval INSERT INTO t1 (a, data) VALUES (5, $data);
---error ER_TRANS_CACHE_FULL, ER_ERROR_ON_WRITE
+--error ER_TRANS_CACHE_FULL, ER_STMT_CACHE_FULL, ER_ERROR_ON_WRITE
 --eval INSERT INTO t1 (a, data) VALUES (6, $data);
 --eval INSERT INTO t1 (a, data) VALUES (7, 's');
 --eval INSERT INTO t2 (a, data) VALUES (8, 's');
@@ -130,9 +132,9 @@ BEGIN;
 --eval INSERT INTO t1 (a, data) VALUES (14, $data);
 --eval INSERT INTO t1 (a, data) VALUES (15, $data);
 --eval INSERT INTO t1 (a, data) VALUES (16, $data);
---error ER_TRANS_CACHE_FULL, ER_ERROR_ON_WRITE
+--error ER_TRANS_CACHE_FULL, ER_STMT_CACHE_FULL, ER_ERROR_ON_WRITE
 --eval INSERT INTO t1 (a, data) VALUES (17, $data);
---error ER_TRANS_CACHE_FULL, ER_ERROR_ON_WRITE
+--error ER_TRANS_CACHE_FULL, ER_STMT_CACHE_FULL, ER_ERROR_ON_WRITE
 --eval INSERT INTO t1 (a, data) VALUES (18, $data);
 --eval INSERT INTO t1 (a, data) VALUES (19, 's');
 --eval INSERT INTO t2 (a, data) VALUES (20, 's');
@@ -148,7 +150,7 @@ if (`SELECT @@binlog_format = 'STATEMENT' || @@binlog_format = 'MIXED'`)
 if (`SELECT @@binlog_format = 'ROW'`)
 {
   --disable_query_log
-  --error ER_TRANS_CACHE_FULL, ER_ERROR_ON_WRITE
+  --error ER_TRANS_CACHE_FULL, ER_STMT_CACHE_FULL, ER_ERROR_ON_WRITE
   CREATE TABLE t4 SELECT * FROM t1;
   --enable_query_log
 }
@@ -162,9 +164,9 @@ BEGIN;
 --eval INSERT INTO t1 (a, data) VALUES (22, $data);
 --eval INSERT INTO t1 (a, data) VALUES (23, $data);
 --eval INSERT INTO t1 (a, data) VALUES (24, $data);
---error ER_TRANS_CACHE_FULL, ER_ERROR_ON_WRITE
+--error ER_TRANS_CACHE_FULL, ER_STMT_CACHE_FULL, ER_ERROR_ON_WRITE
 --eval INSERT INTO t1 (a, data) VALUES (25, $data);
---error ER_TRANS_CACHE_FULL, ER_ERROR_ON_WRITE
+--error ER_TRANS_CACHE_FULL, ER_STMT_CACHE_FULL, ER_ERROR_ON_WRITE
 --eval INSERT INTO t1 (a, data) VALUES (26, $data);
 --eval INSERT INTO t1 (a, data) VALUES (27, 's');
 --eval INSERT INTO t2 (a, data) VALUES (28, 's');
@@ -192,11 +194,11 @@ BEGIN;
 --eval INSERT INTO t1 (a, data) VALUES (1, $data);
 --eval INSERT INTO t1 (a, data) VALUES (2, $data);
 --eval INSERT INTO t1 (a, data) VALUES (3, $data);
---error ER_TRANS_CACHE_FULL, ER_ERROR_ON_WRITE
+--error ER_TRANS_CACHE_FULL, ER_STMT_CACHE_FULL, ER_ERROR_ON_WRITE
 --eval INSERT INTO t1 (a, data) VALUES (4, $data);
---error ER_TRANS_CACHE_FULL, ER_ERROR_ON_WRITE
+--error ER_TRANS_CACHE_FULL, ER_STMT_CACHE_FULL, ER_ERROR_ON_WRITE
 --eval INSERT INTO t1 (a, data) VALUES (5, $data);
---error ER_TRANS_CACHE_FULL, ER_ERROR_ON_WRITE
+--error ER_TRANS_CACHE_FULL, ER_STMT_CACHE_FULL, ER_ERROR_ON_WRITE
 --eval INSERT INTO t1 (a, data) VALUES (6, $data);
 --eval INSERT INTO t1 (a, data) VALUES (7, 's');
 --eval INSERT INTO t2 (a, data) VALUES (8, 's');
@@ -221,11 +223,11 @@ BEGIN;
 --eval INSERT INTO t1 (a, data) VALUES (1, $data);
 --eval INSERT INTO t1 (a, data) VALUES (2, $data);
 --eval INSERT INTO t1 (a, data) VALUES (3, $data);
---error ER_TRANS_CACHE_FULL, ER_ERROR_ON_WRITE
+--error ER_TRANS_CACHE_FULL, ER_STMT_CACHE_FULL, ER_ERROR_ON_WRITE
 --eval INSERT INTO t1 (a, data) VALUES (4, $data);
---error ER_TRANS_CACHE_FULL, ER_ERROR_ON_WRITE
+--error ER_TRANS_CACHE_FULL, ER_STMT_CACHE_FULL, ER_ERROR_ON_WRITE
 --eval INSERT INTO t1 (a, data) VALUES (5, $data);
---error ER_TRANS_CACHE_FULL, ER_ERROR_ON_WRITE
+--error ER_TRANS_CACHE_FULL, ER_STMT_CACHE_FULL, ER_ERROR_ON_WRITE
 --eval INSERT INTO t1 (a, data) VALUES (6, $data);
 --eval INSERT INTO t1 (a, data) VALUES (7, 's');
 --eval INSERT INTO t2 (a, data) VALUES (8, 's');
@@ -268,7 +270,7 @@ TRUNCATE TABLE t1;
 
 BEGIN;
 --disable_query_log
---error ER_TRANS_CACHE_FULL, ER_ERROR_ON_WRITE
+--error ER_TRANS_CACHE_FULL, ER_STMT_CACHE_FULL, ER_ERROR_ON_WRITE
 eval CALL p1($data);
 --enable_query_log
 COMMIT;
@@ -277,7 +279,7 @@ TRUNCATE TABLE t1;
 
 BEGIN;
 --disable_query_log
---error ER_TRANS_CACHE_FULL, ER_ERROR_ON_WRITE
+--error ER_TRANS_CACHE_FULL, ER_STMT_CACHE_FULL, ER_ERROR_ON_WRITE
 eval CALL p1($data);
 --enable_query_log
 ROLLBACK;
@@ -299,12 +301,12 @@ BEGIN;
 --eval INSERT INTO t1 (a, data) VALUES (1, $data);
 --eval INSERT INTO t1 (a, data) VALUES (2, $data);
 --eval INSERT INTO t1 (a, data) VALUES (3, $data);
---error ER_TRANS_CACHE_FULL, ER_ERROR_ON_WRITE
+--error ER_TRANS_CACHE_FULL, ER_STMT_CACHE_FULL, ER_ERROR_ON_WRITE
 --eval INSERT INTO t1 (a, data) VALUES (4, $data);
 SAVEPOINT sv;
---error ER_TRANS_CACHE_FULL, ER_ERROR_ON_WRITE
+--error ER_TRANS_CACHE_FULL, ER_STMT_CACHE_FULL, ER_ERROR_ON_WRITE
 --eval INSERT INTO t1 (a, data) VALUES (5, $data);
---error ER_TRANS_CACHE_FULL, ER_ERROR_ON_WRITE
+--error ER_TRANS_CACHE_FULL, ER_STMT_CACHE_FULL, ER_ERROR_ON_WRITE
 --eval INSERT INTO t1 (a, data) VALUES (6, $data);
 --eval INSERT INTO t1 (a, data) VALUES (7, 's');
 --eval INSERT INTO t2 (a, data) VALUES (8, 's');
@@ -331,11 +333,11 @@ BEGIN;
 --eval INSERT INTO t1 (a, data) VALUES (2, $data);
 --eval INSERT INTO t2 (a, data) VALUES (3, $data);
 --eval INSERT INTO t1 (a, data) VALUES (4, $data);
---error ER_TRANS_CACHE_FULL, ER_ERROR_ON_WRITE
+--error ER_TRANS_CACHE_FULL, ER_STMT_CACHE_FULL, ER_ERROR_ON_WRITE
 --eval INSERT INTO t1 (a, data) VALUES (5, $data);
---error ER_TRANS_CACHE_FULL, ER_ERROR_ON_WRITE
+--error ER_TRANS_CACHE_FULL, ER_STMT_CACHE_FULL, ER_ERROR_ON_WRITE
 --eval INSERT INTO t1 (a, data) VALUES (6, $data);
---error ER_TRANS_CACHE_FULL, ER_ERROR_ON_WRITE
+--error ER_TRANS_CACHE_FULL, ER_STMT_CACHE_FULL, ER_ERROR_ON_WRITE
 --eval INSERT INTO t1 (a, data) VALUES (7, $data);
 --eval UPDATE t2 SET data= CONCAT($data, $data);
 --eval INSERT INTO t1 (a, data) VALUES (8, 's');
@@ -351,7 +353,7 @@ BEGIN;
 --eval INSERT INTO t1 (a, data) VALUES (16, $data);
 --eval INSERT INTO t2 (a, data) VALUES (17, $data);
 --eval INSERT INTO t1 (a, data) VALUES (18, $data);
---error ER_TRANS_CACHE_FULL, ER_ERROR_ON_WRITE
+--error ER_TRANS_CACHE_FULL, ER_STMT_CACHE_FULL, ER_ERROR_ON_WRITE
 --eval INSERT INTO t1 (a, data) VALUES (19, $data);
 --enable_query_log
 COMMIT;
@@ -367,10 +369,13 @@ let $diff_statement= SELECT * FROM t1;
 --echo # [ On Slave ]
 SET GLOBAL max_binlog_cache_size = 4096;
 SET GLOBAL binlog_cache_size = 4096;
+SET GLOBAL max_binlog_stmt_cache_size = 4096;
+SET GLOBAL binlog_stmt_cache_size = 4096;
 
 source include/stop_slave.inc;
 source include/start_slave.inc;
 CALL mtr.add_suppression("Multi-statement transaction required more than 'max_binlog_cache_size' bytes of storage.*");
+CALL mtr.add_suppression("Multi-statement transaction required more than 'max_binlog_stmt_cache_size' bytes of storage.*");
 CALL mtr.add_suppression("Writing one row to the row-based binary log failed.*");
 
 connection master;
@@ -385,6 +390,10 @@ connection master;
 --eval SET GLOBAL max_binlog_cache_size= $old_max_binlog_cache_size
 --replace_result $old_binlog_cache_size ORIGINAL_VALUE
 --eval SET GLOBAL binlog_cache_size= $old_binlog_cache_size
+--replace_result $old_max_binlog_stmt_cache_size ORIGINAL_VALUE
+--eval SET GLOBAL max_binlog_stmt_cache_size= $old_max_binlog_stmt_cache_size
+--replace_result $old_binlog_stmt_cache_size ORIGINAL_VALUE
+--eval SET GLOBAL binlog_stmt_cache_size= $old_binlog_stmt_cache_size
 disconnect master;
 connect (master,127.0.0.1,root,,test,$MASTER_MYPORT,);
 
@@ -415,6 +424,10 @@ source include/show_binlog_events.inc;
 --eval SET GLOBAL max_binlog_cache_size= $old_max_binlog_cache_size
 --replace_result $old_binlog_cache_size ORIGINAL_VALUE
 --eval SET GLOBAL binlog_cache_size= $old_binlog_cache_size
+--replace_result $old_max_binlog_stmt_cache_size ORIGINAL_VALUE
+--eval SET GLOBAL max_binlog_stmt_cache_size= $old_max_binlog_stmt_cache_size
+--replace_result $old_binlog_stmt_cache_size ORIGINAL_VALUE
+--eval SET GLOBAL binlog_stmt_cache_size= $old_binlog_stmt_cache_size
 
 source include/stop_slave.inc;
 source include/start_slave.inc;

mysql-test/r/mysqld--help-notwin.result

@@ -32,10 +32,10 @@ The following options may be given as the first argument:
  file (Solves most 'table full' errors)
  --bind-address=name IP address to bind to.
  --binlog-cache-size=# 
- The size of the cache to hold the SQL statements for the
- binary log during a transaction. If you often use big,
- multi-statement transactions you can increase this to get
- more performance
+ The size of the transactional cache for updates to
+ transactional engines for the binary log. If you often
+ use transactions containing many statements, you can
+ increase this to get more performance
  --binlog-direct-non-transactional-updates 
  Causes updates to non-transactional engines using
  statement format to be written directly to binary log.
@@ -66,6 +66,11 @@ The following options may be given as the first argument:
  The maximum size of a row-based binary log event in
  bytes. Rows will be grouped into events smaller than this
  size if possible. The value has to be a multiple of 256.
+ --binlog-stmt-cache-size=# 
+ The size of the statement cache for updates to
+ non-transactional engines for the binary log. If you
+ often use statements updating a great number of rows, you
+ can increase this to get more performance
  --bootstrap         Used by mysql installation scripts.
  --bulk-insert-buffer-size=# 
  Size of tree cache used in bulk insert optimisation. Note
@@ -278,14 +283,15 @@ The following options may be given as the first argument:
  --max-allowed-packet=# 
  Max packet length to send to or receive from the server
  --max-binlog-cache-size=# 
- Can be used to restrict the total size used to cache a
- multi-transaction query
+ Sets the total size of the transactional cache
  --max-binlog-dump-events=# 
  Option used by mysql-test for debugging and testing of
  replication.
  --max-binlog-size=# Binary log will be rotated automatically when the size
  exceeds this value. Will also apply to relay logs if
  max_relay_log_size is 0
+ --max-binlog-stmt-cache-size=# 
+ Sets the total size of the statement cache
  --max-connect-errors=# 
  If there is more than this number of interrupted
  connections from a host this host will be blocked from
@@ -734,6 +740,7 @@ binlog-cache-size 32768
 binlog-direct-non-transactional-updates FALSE
 binlog-format STATEMENT
 binlog-row-event-max-size 1024
+binlog-stmt-cache-size 32768
 bulk-insert-buffer-size 8388608
 character-set-client-handshake TRUE
 character-set-filesystem binary
@@ -813,6 +820,7 @@ max-allowed-packet 1048576
 max-binlog-cache-size 18446744073709547520
 max-binlog-dump-events 0
 max-binlog-size 1073741824
+max-binlog-stmt-cache-size 18446744073709547520
 max-connect-errors 10
 max-connections 151
 max-delayed-threads 20

mysql-test/suite/binlog/r/binlog_innodb.result

@@ -123,7 +123,7 @@ Binlog_cache_disk_use	0
 create table t1 (a int) engine=innodb;
 show status like "binlog_cache_use";
 Variable_name	Value
-Binlog_cache_use	2
+Binlog_cache_use	1
 show status like "binlog_cache_disk_use";
 Variable_name	Value
 Binlog_cache_disk_use	1
@@ -132,7 +132,7 @@ delete from t1;
 commit;
 show status like "binlog_cache_use";
 Variable_name	Value
-Binlog_cache_use	4
+Binlog_cache_use	2
 show status like "binlog_cache_disk_use";
 Variable_name	Value
 Binlog_cache_disk_use	1

mysql-test/suite/binlog/r/binlog_mix_innodb_stat.result

-flush status;
-show status like "binlog_cache_use";
-Variable_name	Value
-Binlog_cache_use	0
-show status like "binlog_cache_disk_use";
-Variable_name	Value
-Binlog_cache_disk_use	0
-drop table if exists t1;
-create table t1 (a int) engine=innodb;
-show status like "binlog_cache_use";
-Variable_name	Value
-Binlog_cache_use	2
-show status like "binlog_cache_disk_use";
-Variable_name	Value
-Binlog_cache_disk_use	1
-begin;
-delete from t1;
-commit;
-show status like "binlog_cache_use";
-Variable_name	Value
-Binlog_cache_use	4
-show status like "binlog_cache_disk_use";
-Variable_name	Value
-Binlog_cache_disk_use	1
-drop table t1;

mysql-test/suite/binlog/r/binlog_mixed_cache_stat.result

+drop table if exists t1, t2;
+create table t1 (a int) engine=innodb;
+create table t2 (a int) engine=myisam;
+**** Preparing the enviroment to check commit and its effect on status variables.
+**** Expected: binlog_cache_use = 0, binlog_cache_disk_use = 0.
+**** Expected: binlog_stmt_cache_use = 0, binlog_stmt_cache_disk_use = 0.
+flush status;
+**** Transactional changes which are long enough so they will be flushed to disk...
+**** Expected: binlog_cache_use = 1, binlog_cache_disk_use = 1.
+**** Expected: binlog_stmt_cache_use = 0, binlog_stmt_cache_disk_use = 0.
+**** Transactional changes which should not be flushed to disk and so should not
+**** increase either binlog_cache_disk_use or binlog_stmt_cache_disk_use.
+**** Expected: binlog_cache_use = 2, binlog_cache_disk_use = 1.
+**** Expected: binlog_stmt_cache_use = 0, binlog_stmt_cache_disk_use = 0.
+begin;
+insert into t1 values( 1 );
+commit;
+**** Non-Transactional changes which should not be flushed to disk and so should not
+**** increase either binlog_cache_disk_use or binlog_stmt_cache_disk_use.
+**** Expected: binlog_cache_use = 2, binlog_cache_disk_use = 1.
+**** Expected: binlog_stmt_cache_use = 1, binlog_stmt_cache_disk_use = 0.
+begin;
+insert into t2 values( 1 );
+commit;
+**** Mixed changes which should not be flushed to disk and so should not
+**** increase either binlog_cache_disk_use or binlog_stmt_cache_disk_use.
+**** Expected: binlog_cache_use = 3, binlog_cache_disk_use = 1.
+**** Expected: binlog_stmt_cache_use = 2, binlog_stmt_cache_disk_use = 0.
+begin;
+insert into t1 values( 1 );
+insert into t2 values( 1 );
+commit;
+**** Preparing the enviroment to check abort and its effect on the status variables.
+**** Expected: binlog_cache_use = 0, binlog_cache_disk_use = 0.
+**** Expected: binlog_stmt_cache_use = 0, binlog_stmt_cache_disk_use = 0.
+flush status;
+**** Transactional changes which are long enough so they will be flushed to disk...
+**** Expected: binlog_cache_use = 1, binlog_cache_disk_use = 1.
+**** Expected: binlog_stmt_cache_use = 0, binlog_stmt_cache_disk_use = 0.
+**** Transactional changes which should not be flushed to disk and so should not
+**** increase either binlog_cache_disk_use or binlog_stmt_cache_disk_use.
+**** Expected: binlog_cache_use = 2, binlog_cache_disk_use = 1.
+**** Expected: binlog_stmt_cache_use = 0, binlog_stmt_cache_disk_use = 0.
+begin;
+insert into t1 values( 1 );
+rollback;
+**** Non-Transactional changes which should not be flushed to disk and so should not
+**** increase either binlog_cache_disk_use or binlog_stmt_cache_disk_use.
+**** Expected: binlog_cache_use = 2, binlog_cache_disk_use = 1.
+**** Expected: binlog_stmt_cache_use = 1, binlog_stmt_cache_disk_use = 0.
+begin;
+insert into t2 values( 1 );
+rollback;
+Warnings:
+Warning	1196	Some non-transactional changed tables couldn't be rolled back
+**** Mixed changes which should not be flushed to disk and so should not
+**** increase either binlog_cache_disk_use or binlog_stmt_cache_disk_use.
+**** Expected: binlog_cache_use = 3, binlog_cache_disk_use = 1.
+**** Expected: binlog_stmt_cache_use = 2, binlog_stmt_cache_disk_use = 0.
+begin;
+insert into t1 values( 1 );
+insert into t2 values( 1 );
+rollback;
+Warnings:
+Warning	1196	Some non-transactional changed tables couldn't be rolled back
+drop table t1, t2;

mysql-test/suite/binlog/r/binlog_row_cache_stat.result

+drop table if exists t1, t2;
+create table t1 (a int) engine=innodb;
+create table t2 (a int) engine=myisam;
+**** Preparing the enviroment to check commit and its effect on status variables.
+**** Expected: binlog_cache_use = 0, binlog_cache_disk_use = 0.
+**** Expected: binlog_stmt_cache_use = 0, binlog_stmt_cache_disk_use = 0.
+flush status;
+**** Transactional changes which are long enough so they will be flushed to disk...
+**** Expected: binlog_cache_use = 1, binlog_cache_disk_use = 1.
+**** Expected: binlog_stmt_cache_use = 0, binlog_stmt_cache_disk_use = 0.
+**** Transactional changes which should not be flushed to disk and so should not
+**** increase either binlog_cache_disk_use or binlog_stmt_cache_disk_use.
+**** Expected: binlog_cache_use = 2, binlog_cache_disk_use = 1.
+**** Expected: binlog_stmt_cache_use = 0, binlog_stmt_cache_disk_use = 0.
+begin;
+insert into t1 values( 1 );
+commit;
+**** Non-Transactional changes which should not be flushed to disk and so should not
+**** increase either binlog_cache_disk_use or binlog_stmt_cache_disk_use.
+**** Expected: binlog_cache_use = 2, binlog_cache_disk_use = 1.
+**** Expected: binlog_stmt_cache_use = 1, binlog_stmt_cache_disk_use = 0.
+begin;
+insert into t2 values( 1 );
+commit;
+**** Mixed changes which should not be flushed to disk and so should not
+**** increase either binlog_cache_disk_use or binlog_stmt_cache_disk_use.
+**** Expected: binlog_cache_use = 3, binlog_cache_disk_use = 1.
+**** Expected: binlog_stmt_cache_use = 2, binlog_stmt_cache_disk_use = 0.
+begin;
+insert into t1 values( 1 );
+insert into t2 values( 1 );
+commit;
+**** Preparing the enviroment to check abort and its effect on the status variables.
+**** Expected: binlog_cache_use = 0, binlog_cache_disk_use = 0.
+**** Expected: binlog_stmt_cache_use = 0, binlog_stmt_cache_disk_use = 0.
+flush status;
+**** Transactional changes which are long enough so they will be flushed to disk...
+**** Expected: binlog_cache_use = 1, binlog_cache_disk_use = 1.
+**** Expected: binlog_stmt_cache_use = 0, binlog_stmt_cache_disk_use = 0.
+**** Transactional changes which should not be flushed to disk and so should not
+**** increase either binlog_cache_disk_use or binlog_stmt_cache_disk_use.
+**** Expected: binlog_cache_use = 2, binlog_cache_disk_use = 1.
+**** Expected: binlog_stmt_cache_use = 0, binlog_stmt_cache_disk_use = 0.
+begin;
+insert into t1 values( 1 );
+rollback;
+**** Non-Transactional changes which should not be flushed to disk and so should not
+**** increase either binlog_cache_disk_use or binlog_stmt_cache_disk_use.
+**** Expected: binlog_cache_use = 2, binlog_cache_disk_use = 1.
+**** Expected: binlog_stmt_cache_use = 1, binlog_stmt_cache_disk_use = 0.
+begin;
+insert into t2 values( 1 );
+rollback;
+Warnings:
+Warning	1196	Some non-transactional changed tables couldn't be rolled back
+**** Mixed changes which should not be flushed to disk and so should not
+**** increase either binlog_cache_disk_use or binlog_stmt_cache_disk_use.
+**** Expected: binlog_cache_use = 3, binlog_cache_disk_use = 1.
+**** Expected: binlog_stmt_cache_use = 2, binlog_stmt_cache_disk_use = 0.
+begin;
+insert into t1 values( 1 );
+insert into t2 values( 1 );
+rollback;
+Warnings:
+Warning	1196	Some non-transactional changed tables couldn't be rolled back
+drop table t1, t2;

mysql-test/suite/binlog/r/binlog_row_innodb_stat.result

-flush status;
-show status like "binlog_cache_use";
-Variable_name	Value
-Binlog_cache_use	0
-show status like "binlog_cache_disk_use";
-Variable_name	Value
-Binlog_cache_disk_use	0
-drop table if exists t1;
-create table t1 (a int) engine=innodb;
-show status like "binlog_cache_use";
-Variable_name	Value
-Binlog_cache_use	2
-show status like "binlog_cache_disk_use";
-Variable_name	Value
-Binlog_cache_disk_use	1
-begin;
-delete from t1;
-commit;
-show status like "binlog_cache_use";
-Variable_name	Value
-Binlog_cache_use	4
-show status like "binlog_cache_disk_use";
-Variable_name	Value
-Binlog_cache_disk_use	1
-drop table t1;

mysql-test/suite/binlog/r/binlog_stm_cache_stat.result

+drop table if exists t1, t2;
+create table t1 (a int) engine=innodb;
+create table t2 (a int) engine=myisam;
+**** Preparing the enviroment to check commit and its effect on status variables.
+**** Expected: binlog_cache_use = 0, binlog_cache_disk_use = 0.
+**** Expected: binlog_stmt_cache_use = 0, binlog_stmt_cache_disk_use = 0.
+flush status;
+**** Transactional changes which are long enough so they will be flushed to disk...
+**** Expected: binlog_cache_use = 1, binlog_cache_disk_use = 1.
+**** Expected: binlog_stmt_cache_use = 0, binlog_stmt_cache_disk_use = 0.
+**** Transactional changes which should not be flushed to disk and so should not
+**** increase either binlog_cache_disk_use or binlog_stmt_cache_disk_use.
+**** Expected: binlog_cache_use = 2, binlog_cache_disk_use = 1.
+**** Expected: binlog_stmt_cache_use = 0, binlog_stmt_cache_disk_use = 0.
+begin;
+insert into t1 values( 1 );
+commit;
+**** Non-Transactional changes which should not be flushed to disk and so should not
+**** increase either binlog_cache_disk_use or binlog_stmt_cache_disk_use.
+**** Expected: binlog_cache_use = 2, binlog_cache_disk_use = 1.
+**** Expected: binlog_stmt_cache_use = 1, binlog_stmt_cache_disk_use = 0.
+begin;
+insert into t2 values( 1 );
+commit;
+**** Mixed changes which should not be flushed to disk and so should not
+**** increase either binlog_cache_disk_use or binlog_stmt_cache_disk_use.
+**** Expected: binlog_cache_use = 3, binlog_cache_disk_use = 1.
+**** Expected: binlog_stmt_cache_use = 2, binlog_stmt_cache_disk_use = 0.
+begin;
+insert into t1 values( 1 );
+insert into t2 values( 1 );
+commit;
+**** Preparing the enviroment to check abort and its effect on the status variables.
+**** Expected: binlog_cache_use = 0, binlog_cache_disk_use = 0.
+**** Expected: binlog_stmt_cache_use = 0, binlog_stmt_cache_disk_use = 0.
+flush status;
+**** Transactional changes which are long enough so they will be flushed to disk...
+**** Expected: binlog_cache_use = 1, binlog_cache_disk_use = 1.
+**** Expected: binlog_stmt_cache_use = 0, binlog_stmt_cache_disk_use = 0.
+**** Transactional changes which should not be flushed to disk and so should not
+**** increase either binlog_cache_disk_use or binlog_stmt_cache_disk_use.
+**** Expected: binlog_cache_use = 2, binlog_cache_disk_use = 1.
+**** Expected: binlog_stmt_cache_use = 0, binlog_stmt_cache_disk_use = 0.
+begin;
+insert into t1 values( 1 );
+rollback;
+**** Non-Transactional changes which should not be flushed to disk and so should not
+**** increase either binlog_cache_disk_use or binlog_stmt_cache_disk_use.
+**** Expected: binlog_cache_use = 2, binlog_cache_disk_use = 1.
+**** Expected: binlog_stmt_cache_use = 1, binlog_stmt_cache_disk_use = 0.
+begin;
+insert into t2 values( 1 );
+rollback;
+Warnings:
+Warning	1196	Some non-transactional changed tables couldn't be rolled back
+**** Mixed changes which should not be flushed to disk and so should not
+**** increase either binlog_cache_disk_use or binlog_stmt_cache_disk_use.
+**** Expected: binlog_cache_use = 3, binlog_cache_disk_use = 1.
+**** Expected: binlog_stmt_cache_use = 2, binlog_stmt_cache_disk_use = 0.
+begin;
+insert into t1 values( 1 );
+insert into t2 values( 1 );
+rollback;
+Warnings:
+Warning	1196	Some non-transactional changed tables couldn't be rolled back
+drop table t1, t2;

mysql-test/suite/binlog/r/binlog_stm_innodb_stat.result

-flush status;
-show status like "binlog_cache_use";
-Variable_name	Value
-Binlog_cache_use	0
-show status like "binlog_cache_disk_use";
-Variable_name	Value
-Binlog_cache_disk_use	0
-drop table if exists t1;
-create table t1 (a int) engine=innodb;
-show status like "binlog_cache_use";
-Variable_name	Value
-Binlog_cache_use	2
-show status like "binlog_cache_disk_use";
-Variable_name	Value
-Binlog_cache_disk_use	1
-begin;
-delete from t1;
-commit;
-show status like "binlog_cache_use";
-Variable_name	Value
-Binlog_cache_use	4
-show status like "binlog_cache_disk_use";
-Variable_name	Value
-Binlog_cache_disk_use	1
-drop table t1;

mysql-test/suite/binlog/t/binlog_mix_innodb_stat.test → mysql-test/suite/binlog/t/binlog_mixed_cache_stat.test

@@ -2,4 +2,4 @@
 # For both statement and row based bin logs 9/19/2005 [jbm]
 
 -- source include/have_binlog_format_mixed.inc
--- source extra/binlog_tests/innodb_stat.test
+-- source extra/binlog_tests/binlog_cache_stat.test

mysql-test/suite/binlog/t/binlog_row_innodb_stat.test → mysql-test/suite/binlog/t/binlog_row_cache_stat.test

@@ -2,4 +2,4 @@
 # For both statement and row based bin logs 9/19/2005 [jbm]
 
 -- source include/have_binlog_format_row.inc
--- source extra/binlog_tests/innodb_stat.test
+-- source extra/binlog_tests/binlog_cache_stat.test

mysql-test/suite/binlog/t/binlog_stm_innodb_stat.test → mysql-test/suite/binlog/t/binlog_stm_cache_stat.test

@@ -2,4 +2,4 @@
 # For both statement and row based bin logs 9/19/2005 [jbm]
 
 -- source include/have_binlog_format_statement.inc
--- source extra/binlog_tests/innodb_stat.test
+-- source extra/binlog_tests/binlog_cache_stat.test

mysql-test/suite/rpl/r/rpl_mixed_binlog_max_cache_size.result

@@ -7,6 +7,8 @@ start slave;
 call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 SET GLOBAL max_binlog_cache_size = 4096;
 SET GLOBAL binlog_cache_size = 4096;
+SET GLOBAL max_binlog_stmt_cache_size = 4096;
+SET GLOBAL binlog_stmt_cache_size = 4096;
 CREATE TABLE t1(a INT PRIMARY KEY, data VARCHAR(30000)) ENGINE=Innodb;
 CREATE TABLE t2(a INT PRIMARY KEY, data VARCHAR(30000)) ENGINE=MyIsam;
 CREATE TABLE t3(a INT PRIMARY KEY, data VARCHAR(30000)) ENGINE=Innodb;
@@ -129,13 +131,18 @@ source include/diff_master_slave.inc;
 # [ On Slave ]
 SET GLOBAL max_binlog_cache_size = 4096;
 SET GLOBAL binlog_cache_size = 4096;
+SET GLOBAL max_binlog_stmt_cache_size = 4096;
+SET GLOBAL binlog_stmt_cache_size = 4096;
 include/stop_slave.inc
 include/start_slave.inc
 CALL mtr.add_suppression("Multi-statement transaction required more than 'max_binlog_cache_size' bytes of storage.*");
+CALL mtr.add_suppression("Multi-statement transaction required more than 'max_binlog_stmt_cache_size' bytes of storage.*");
 CALL mtr.add_suppression("Writing one row to the row-based binary log failed.*");
 TRUNCATE t1;
 SET GLOBAL max_binlog_cache_size= ORIGINAL_VALUE;
 SET GLOBAL binlog_cache_size= ORIGINAL_VALUE;
+SET GLOBAL max_binlog_stmt_cache_size= ORIGINAL_VALUE;
+SET GLOBAL binlog_stmt_cache_size= ORIGINAL_VALUE;
 BEGIN;
 Repeat statement 'INSERT INTO t1 VALUES($n, repeat("a", 32))' 128 times
 COMMIT;
@@ -146,6 +153,8 @@ show binlog events in 'slave-bin.000001' from <binlog_start>;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 SET GLOBAL max_binlog_cache_size= ORIGINAL_VALUE;
 SET GLOBAL binlog_cache_size= ORIGINAL_VALUE;
+SET GLOBAL max_binlog_stmt_cache_size= ORIGINAL_VALUE;
+SET GLOBAL binlog_stmt_cache_size= ORIGINAL_VALUE;
 include/stop_slave.inc
 include/start_slave.inc
 SELECT count(*) FROM t1;

mysql-test/suite/rpl/r/rpl_row_binlog_max_cache_size.result

@@ -7,6 +7,8 @@ start slave;
 call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 SET GLOBAL max_binlog_cache_size = 4096;
 SET GLOBAL binlog_cache_size = 4096;
+SET GLOBAL max_binlog_stmt_cache_size = 4096;
+SET GLOBAL binlog_stmt_cache_size = 4096;
 CREATE TABLE t1(a INT PRIMARY KEY, data VARCHAR(30000)) ENGINE=Innodb;
 CREATE TABLE t2(a INT PRIMARY KEY, data VARCHAR(30000)) ENGINE=MyIsam;
 CREATE TABLE t3(a INT PRIMARY KEY, data VARCHAR(30000)) ENGINE=Innodb;
@@ -130,13 +132,18 @@ source include/diff_master_slave.inc;
 # [ On Slave ]
 SET GLOBAL max_binlog_cache_size = 4096;
 SET GLOBAL binlog_cache_size = 4096;
+SET GLOBAL max_binlog_stmt_cache_size = 4096;
+SET GLOBAL binlog_stmt_cache_size = 4096;
 include/stop_slave.inc
 include/start_slave.inc
 CALL mtr.add_suppression("Multi-statement transaction required more than 'max_binlog_cache_size' bytes of storage.*");
+CALL mtr.add_suppression("Multi-statement transaction required more than 'max_binlog_stmt_cache_size' bytes of storage.*");
 CALL mtr.add_suppression("Writing one row to the row-based binary log failed.*");
 TRUNCATE t1;
 SET GLOBAL max_binlog_cache_size= ORIGINAL_VALUE;
 SET GLOBAL binlog_cache_size= ORIGINAL_VALUE;
+SET GLOBAL max_binlog_stmt_cache_size= ORIGINAL_VALUE;
+SET GLOBAL binlog_stmt_cache_size= ORIGINAL_VALUE;
 BEGIN;
 Repeat statement 'INSERT INTO t1 VALUES($n, repeat("a", 32))' 128 times
 COMMIT;
@@ -147,6 +154,8 @@ show binlog events in 'slave-bin.000001' from <binlog_start>;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 SET GLOBAL max_binlog_cache_size= ORIGINAL_VALUE;
 SET GLOBAL binlog_cache_size= ORIGINAL_VALUE;
+SET GLOBAL max_binlog_stmt_cache_size= ORIGINAL_VALUE;
+SET GLOBAL binlog_stmt_cache_size= ORIGINAL_VALUE;
 include/stop_slave.inc
 include/start_slave.inc
 SELECT count(*) FROM t1;

mysql-test/suite/rpl/r/rpl_stm_binlog_max_cache_size.result

@@ -7,6 +7,8 @@ start slave;
 call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 SET GLOBAL max_binlog_cache_size = 4096;
 SET GLOBAL binlog_cache_size = 4096;
+SET GLOBAL max_binlog_stmt_cache_size = 4096;
+SET GLOBAL binlog_stmt_cache_size = 4096;
 CREATE TABLE t1(a INT PRIMARY KEY, data VARCHAR(30000)) ENGINE=Innodb;
 CREATE TABLE t2(a INT PRIMARY KEY, data VARCHAR(30000)) ENGINE=MyIsam;
 CREATE TABLE t3(a INT PRIMARY KEY, data VARCHAR(30000)) ENGINE=Innodb;
@@ -129,13 +131,18 @@ source include/diff_master_slave.inc;
 # [ On Slave ]
 SET GLOBAL max_binlog_cache_size = 4096;
 SET GLOBAL binlog_cache_size = 4096;
+SET GLOBAL max_binlog_stmt_cache_size = 4096;
+SET GLOBAL binlog_stmt_cache_size = 4096;
 include/stop_slave.inc
 include/start_slave.inc
 CALL mtr.add_suppression("Multi-statement transaction required more than 'max_binlog_cache_size' bytes of storage.*");
+CALL mtr.add_suppression("Multi-statement transaction required more than 'max_binlog_stmt_cache_size' bytes of storage.*");
 CALL mtr.add_suppression("Writing one row to the row-based binary log failed.*");
 TRUNCATE t1;
 SET GLOBAL max_binlog_cache_size= ORIGINAL_VALUE;
 SET GLOBAL binlog_cache_size= ORIGINAL_VALUE;
+SET GLOBAL max_binlog_stmt_cache_size= ORIGINAL_VALUE;
+SET GLOBAL binlog_stmt_cache_size= ORIGINAL_VALUE;
 BEGIN;
 Repeat statement 'INSERT INTO t1 VALUES($n, repeat("a", 32))' 128 times
 COMMIT;
@@ -146,6 +153,8 @@ show binlog events in 'slave-bin.000001' from <binlog_start>;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 SET GLOBAL max_binlog_cache_size= ORIGINAL_VALUE;
 SET GLOBAL binlog_cache_size= ORIGINAL_VALUE;
+SET GLOBAL max_binlog_stmt_cache_size= ORIGINAL_VALUE;
+SET GLOBAL binlog_stmt_cache_size= ORIGINAL_VALUE;
 include/stop_slave.inc
 include/start_slave.inc
 SELECT count(*) FROM t1;

mysql-test/suite/sys_vars/inc/binlog_stmt_cache_size_basic.inc

+################ mysql-test\t\binlog_stmt_cache_size_basic.test ################
+#                                                                              #
+# Variable Name: binlog_stmt_cache_size                                        #
+# Scope: GLOBAL                                                                #
+# Access Type: Dynamic                                                         #
+# Data Type: Numeric                                                           #
+# Default Value: 32768                                                         #
+# Range: 4096 - 4294967295                                                     #
+#                                                                              #
+#                                                                              #
+# Creation Date: 2010-10-12                                                    #
+# Author: Alfranio Correia                                                     #
+#                                                                              #
+# Description: Test Cases of Dynamic System Variable "binlog_stmt_cache_size"  #
+#              that checks behavior of this variable in the following ways     #
+#              * Default Value                                                 #
+#              * Valid & Invalid values                                        #
+#              * Scope & Access method                                         #
+#              * Data Integrity                          .                     #
+#                                                                              #
+# Reference: http://dev.mysql.com/doc/refman/5.5/en/                           #
+#         server-system-variables.html#option_mysqld_binlog_stmt_cache_size    #
+#                                                                              #
+################################################################################
+
+#################################################################
+#          START OF binlog_stmt_cache_size TESTS                #
+#################################################################
+
+#########################################################################
+# Saving initial value of binlog_stmt_cache_size in a temporary variable     #
+#########################################################################
+
+SET @start_value = @@global.binlog_stmt_cache_size;
+SELECT @start_value;
+
+--echo '#--------------------FN_DYNVARS_006_01------------------------#'
+######################################################################### 
+#         Display the DEFAULT value of binlog_stmt_cache_size           #
+######################################################################### 
+
+SET @@global.binlog_stmt_cache_size = 100;
+SET @@global.binlog_stmt_cache_size = DEFAULT;
+SELECT @@global.binlog_stmt_cache_size;
+
+
+--echo '#---------------------FN_DYNVARS_006_02-------------------------#'
+############################################### 
+#     Verify default value of variable        #
+############################################### 
+
+SET @@global.binlog_stmt_cache_size = @start_value;
+SELECT @@global.binlog_stmt_cache_size = 32768;
+
+
+--echo '#--------------------FN_DYNVARS_006_03------------------------#'
+#########################################################################
+#    Change the value of binlog_stmt_cache_size to a valid value        #
+#########################################################################
+
+SET @@global.binlog_stmt_cache_size = 4096;
+SELECT @@global.binlog_stmt_cache_size;
+SET @@global.binlog_stmt_cache_size = 4294967295;
+SELECT @@global.binlog_stmt_cache_size;
+SET @@global.binlog_stmt_cache_size = 10000;
+SELECT @@global.binlog_stmt_cache_size;
+SET @@global.binlog_stmt_cache_size = 21221204;
+SELECT @@global.binlog_stmt_cache_size;
+echo 'Bug: Invalid values are coming in variable on assigning valid values';
+
+
+--echo '#--------------------FN_DYNVARS_006_04-------------------------#'
+############################################################################
+#     Change the value of binlog_stmt_cache_size to invalid value          #
+############################################################################ 
+
+SET @@global.binlog_stmt_cache_size = 1024;
+SELECT @@global.binlog_stmt_cache_size;
+--Error ER_WRONG_TYPE_FOR_VAR
+SET @@global.binlog_stmt_cache_size = 10000.01;
+SET @@global.binlog_stmt_cache_size = -1024;
+SELECT @@global.binlog_stmt_cache_size;
+SET @@global.binlog_stmt_cache_size = 42949672950;
+SELECT @@global.binlog_stmt_cache_size;
+echo 'Bug: Errors are not coming on assigning invalid values to variable';
+
+--Error ER_WRONG_TYPE_FOR_VAR
+SET @@global.binlog_stmt_cache_size = ON;
+
+--Error ER_WRONG_TYPE_FOR_VAR
+SET @@global.binlog_stmt_cache_size = 'test';
+
+
+--echo '#-------------------FN_DYNVARS_006_05----------------------------#'
+############################################################################
+#     Test if accessing session binlog_stmt_cache_size gives error         #
+############################################################################
+
+--Error ER_GLOBAL_VARIABLE
+SET @@session.binlog_stmt_cache_size = 0;
+
+
+--echo '#----------------------FN_DYNVARS_006_06------------------------#'
+############################################################################## 
+# Check if the value in GLOBAL Tables matches values in variable             #
+##############################################################################
+
+SELECT @@global.binlog_stmt_cache_size = VARIABLE_VALUE FROM INFORMATION_SCHEMA.GLOBAL_VARIABLES WHERE VARIABLE_NAME='binlog_stmt_cache_size';
+
+--echo '#---------------------FN_DYNVARS_006_07----------------------#'
+################################################################### 
+#      Check if TRUE and FALSE values can be used on variable     #
+################################################################### 
+
+SET @@global.binlog_stmt_cache_size = TRUE;
+SELECT @@global.binlog_stmt_cache_size;
+SET @@global.binlog_stmt_cache_size = FALSE;
+SELECT @@global.binlog_stmt_cache_size;
+echo 'Bug: Errors are not coming on assigning TRUE/FALSE to variable';
+
+--echo '#---------------------FN_DYNVARS_006_08----------------------#'
+###############################################################################
+#   Check if accessing variable without SCOPE points to same global variable  #
+###############################################################################
+
+SET @@global.binlog_stmt_cache_size = 1;
+SELECT @@binlog_stmt_cache_size = @@global.binlog_stmt_cache_size;
+
+--echo '#---------------------FN_DYNVARS_006_09----------------------#'
+###########################################################################
+# Check if binlog_stmt_cache_size can be accessed with and without @@ sign#
+###########################################################################
+
+--Error ER_GLOBAL_VARIABLE
+SET binlog_stmt_cache_size = 1;
+--Error ER_PARSE_ERROR
+SET global.binlog_stmt_cache_size = 1;
+--Error ER_UNKNOWN_TABLE
+SELECT global.binlog_stmt_cache_size;
+--Error ER_BAD_FIELD_ERROR
+SELECT binlog_stmt_cache_size = @@session.binlog_stmt_cache_size;
+
+
+##############################  
+#   Restore initial value    #
+##############################
+
+SET @@global.binlog_stmt_cache_size = @start_value;
+SELECT @@global.binlog_stmt_cache_size;
+
+
+###########################################################
+#         END OF binlog_stmt_cache_size TESTS             #
+###########################################################

mysql-test/suite/sys_vars/r/binlog_stmt_cache_size_basic_32.result

+SET @start_value = @@global.binlog_stmt_cache_size;
+SELECT @start_value;
+@start_value
+32768
+'#--------------------FN_DYNVARS_006_01------------------------#'
+SET @@global.binlog_stmt_cache_size = 100;
+Warnings:
+Warning	1292	Truncated incorrect binlog_stmt_cache_size value: '100'
+SET @@global.binlog_stmt_cache_size = DEFAULT;
+SELECT @@global.binlog_stmt_cache_size;
+@@global.binlog_stmt_cache_size
+32768
+'#---------------------FN_DYNVARS_006_02-------------------------#'
+SET @@global.binlog_stmt_cache_size = @start_value;
+SELECT @@global.binlog_stmt_cache_size = 32768;
+@@global.binlog_stmt_cache_size = 32768
+1
+'#--------------------FN_DYNVARS_006_03------------------------#'
+SET @@global.binlog_stmt_cache_size = 4096;
+SELECT @@global.binlog_stmt_cache_size;
+@@global.binlog_stmt_cache_size
+4096
+SET @@global.binlog_stmt_cache_size = 4294967295;
+Warnings:
+Warning	1292	Truncated incorrect binlog_stmt_cache_size value: '4294967295'
+SELECT @@global.binlog_stmt_cache_size;
+@@global.binlog_stmt_cache_size
+4294963200
+SET @@global.binlog_stmt_cache_size = 10000;
+Warnings:
+Warning	1292	Truncated incorrect binlog_stmt_cache_size value: '10000'
+SELECT @@global.binlog_stmt_cache_size;
+@@global.binlog_stmt_cache_size
+8192
+SET @@global.binlog_stmt_cache_size = 21221204;
+Warnings:
+Warning	1292	Truncated incorrect binlog_stmt_cache_size value: '21221204'
+SELECT @@global.binlog_stmt_cache_size;
+@@global.binlog_stmt_cache_size
+21217280
+'Bug: Invalid values are coming in variable on assigning valid values'
+'#--------------------FN_DYNVARS_006_04-------------------------#'
+SET @@global.binlog_stmt_cache_size = 1024;
+Warnings:
+Warning	1292	Truncated incorrect binlog_stmt_cache_size value: '1024'
+SELECT @@global.binlog_stmt_cache_size;
+@@global.binlog_stmt_cache_size
+4096
+SET @@global.binlog_stmt_cache_size = 10000.01;
+ERROR 42000: Incorrect argument type to variable 'binlog_stmt_cache_size'
+SET @@global.binlog_stmt_cache_size = -1024;
+Warnings:
+Warning	1292	Truncated incorrect binlog_stmt_cache_size value: '-1024'
+SELECT @@global.binlog_stmt_cache_size;
+@@global.binlog_stmt_cache_size
+4096
+SET @@global.binlog_stmt_cache_size = 42949672950;
+Warnings:
+Warning	1292	Truncated incorrect binlog_stmt_cache_size value: '42949672950'
+SELECT @@global.binlog_stmt_cache_size;
+@@global.binlog_stmt_cache_size
+4294963200
+'Bug: Errors are not coming on assigning invalid values to variable'
+SET @@global.binlog_stmt_cache_size = ON;
+ERROR 42000: Incorrect argument type to variable 'binlog_stmt_cache_size'
+SET @@global.binlog_stmt_cache_size = 'test';
+ERROR 42000: Incorrect argument type to variable 'binlog_stmt_cache_size'
+'#-------------------FN_DYNVARS_006_05----------------------------#'
+SET @@session.binlog_stmt_cache_size = 0;
+ERROR HY000: Variable 'binlog_stmt_cache_size' is a GLOBAL variable and should be set with SET GLOBAL
+'#----------------------FN_DYNVARS_006_06------------------------#'
+SELECT @@global.binlog_stmt_cache_size = VARIABLE_VALUE FROM INFORMATION_SCHEMA.GLOBAL_VARIABLES WHERE VARIABLE_NAME='binlog_stmt_cache_size';
+@@global.binlog_stmt_cache_size = VARIABLE_VALUE
+1
+'#---------------------FN_DYNVARS_006_07----------------------#'
+SET @@global.binlog_stmt_cache_size = TRUE;
+Warnings:
+Warning	1292	Truncated incorrect binlog_stmt_cache_size value: '1'
+SELECT @@global.binlog_stmt_cache_size;
+@@global.binlog_stmt_cache_size
+4096
+SET @@global.binlog_stmt_cache_size = FALSE;
+Warnings:
+Warning	1292	Truncated incorrect binlog_stmt_cache_size value: '0'
+SELECT @@global.binlog_stmt_cache_size;
+@@global.binlog_stmt_cache_size
+4096
+'Bug: Errors are not coming on assigning TRUE/FALSE to variable'
+'#---------------------FN_DYNVARS_006_08----------------------#'
+SET @@global.binlog_stmt_cache_size = 1;
+Warnings:
+Warning	1292	Truncated incorrect binlog_stmt_cache_size value: '1'
+SELECT @@binlog_stmt_cache_size = @@global.binlog_stmt_cache_size;
+@@binlog_stmt_cache_size = @@global.binlog_stmt_cache_size
+1
+'#---------------------FN_DYNVARS_006_09----------------------#'
+SET binlog_stmt_cache_size = 1;
+ERROR HY000: Variable 'binlog_stmt_cache_size' is a GLOBAL variable and should be set with SET GLOBAL
+SET global.binlog_stmt_cache_size = 1;
+ERROR 42000: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'binlog_stmt_cache_size = 1' at line 1
+SELECT global.binlog_stmt_cache_size;
+ERROR 42S02: Unknown table 'global' in field list
+SELECT binlog_stmt_cache_size = @@session.binlog_stmt_cache_size;
+ERROR 42S22: Unknown column 'binlog_stmt_cache_size' in 'field list'
+SET @@global.binlog_stmt_cache_size = @start_value;
+SELECT @@global.binlog_stmt_cache_size;
+@@global.binlog_stmt_cache_size
+32768

mysql-test/suite/sys_vars/r/binlog_stmt_cache_size_basic_64.result

+SET @start_value = @@global.binlog_stmt_cache_size;
+SELECT @start_value;
+@start_value
+32768
+'#--------------------FN_DYNVARS_006_01------------------------#'
+SET @@global.binlog_stmt_cache_size = 100;
+Warnings:
+Warning	1292	Truncated incorrect binlog_stmt_cache_size value: '100'
+SET @@global.binlog_stmt_cache_size = DEFAULT;
+SELECT @@global.binlog_stmt_cache_size;
+@@global.binlog_stmt_cache_size
+32768
+'#---------------------FN_DYNVARS_006_02-------------------------#'
+SET @@global.binlog_stmt_cache_size = @start_value;
+SELECT @@global.binlog_stmt_cache_size = 32768;
+@@global.binlog_stmt_cache_size = 32768
+1
+'#--------------------FN_DYNVARS_006_03------------------------#'
+SET @@global.binlog_stmt_cache_size = 4096;
+SELECT @@global.binlog_stmt_cache_size;
+@@global.binlog_stmt_cache_size
+4096
+SET @@global.binlog_stmt_cache_size = 4294967295;
+Warnings:
+Warning	1292	Truncated incorrect binlog_stmt_cache_size value: '4294967295'
+SELECT @@global.binlog_stmt_cache_size;
+@@global.binlog_stmt_cache_size
+4294963200
+SET @@global.binlog_stmt_cache_size = 10000;
+Warnings:
+Warning	1292	Truncated incorrect binlog_stmt_cache_size value: '10000'
+SELECT @@global.binlog_stmt_cache_size;
+@@global.binlog_stmt_cache_size
+8192
+SET @@global.binlog_stmt_cache_size = 21221204;
+Warnings:
+Warning	1292	Truncated incorrect binlog_stmt_cache_size value: '21221204'
+SELECT @@global.binlog_stmt_cache_size;
+@@global.binlog_stmt_cache_size
+21217280
+'Bug: Invalid values are coming in variable on assigning valid values'
+'#--------------------FN_DYNVARS_006_04-------------------------#'
+SET @@global.binlog_stmt_cache_size = 1024;
+Warnings:
+Warning	1292	Truncated incorrect binlog_stmt_cache_size value: '1024'
+SELECT @@global.binlog_stmt_cache_size;
+@@global.binlog_stmt_cache_size
+4096
+SET @@global.binlog_stmt_cache_size = 10000.01;
+ERROR 42000: Incorrect argument type to variable 'binlog_stmt_cache_size'
+SET @@global.binlog_stmt_cache_size = -1024;
+Warnings:
+Warning	1292	Truncated incorrect binlog_stmt_cache_size value: '-1024'
+SELECT @@global.binlog_stmt_cache_size;
+@@global.binlog_stmt_cache_size
+4096
+SET @@global.binlog_stmt_cache_size = 42949672950;
+Warnings:
+Warning	1292	Truncated incorrect binlog_stmt_cache_size value: '42949672950'
+SELECT @@global.binlog_stmt_cache_size;
+@@global.binlog_stmt_cache_size
+4294963200
+'Bug: Errors are not coming on assigning invalid values to variable'
+SET @@global.binlog_stmt_cache_size = ON;
+ERROR 42000: Incorrect argument type to variable 'binlog_stmt_cache_size'
+SET @@global.binlog_stmt_cache_size = 'test';
+ERROR 42000: Incorrect argument type to variable 'binlog_stmt_cache_size'
+'#-------------------FN_DYNVARS_006_05----------------------------#'
+SET @@session.binlog_stmt_cache_size = 0;
+ERROR HY000: Variable 'binlog_stmt_cache_size' is a GLOBAL variable and should be set with SET GLOBAL
+'#----------------------FN_DYNVARS_006_06------------------------#'
+SELECT @@global.binlog_stmt_cache_size = VARIABLE_VALUE FROM INFORMATION_SCHEMA.GLOBAL_VARIABLES WHERE VARIABLE_NAME='binlog_stmt_cache_size';
+@@global.binlog_stmt_cache_size = VARIABLE_VALUE
+1
+'#---------------------FN_DYNVARS_006_07----------------------#'
+SET @@global.binlog_stmt_cache_size = TRUE;
+Warnings:
+Warning	1292	Truncated incorrect binlog_stmt_cache_size value: '1'
+SELECT @@global.binlog_stmt_cache_size;
+@@global.binlog_stmt_cache_size
+4096
+SET @@global.binlog_stmt_cache_size = FALSE;
+Warnings:
+Warning	1292	Truncated incorrect binlog_stmt_cache_size value: '0'
+SELECT @@global.binlog_stmt_cache_size;
+@@global.binlog_stmt_cache_size
+4096
+'Bug: Errors are not coming on assigning TRUE/FALSE to variable'
+'#---------------------FN_DYNVARS_006_08----------------------#'
+SET @@global.binlog_stmt_cache_size = 1;
+Warnings:
+Warning	1292	Truncated incorrect binlog_stmt_cache_size value: '1'
+SELECT @@binlog_stmt_cache_size = @@global.binlog_stmt_cache_size;
+@@binlog_stmt_cache_size = @@global.binlog_stmt_cache_size
+1
+'#---------------------FN_DYNVARS_006_09----------------------#'
+SET binlog_stmt_cache_size = 1;
+ERROR HY000: Variable 'binlog_stmt_cache_size' is a GLOBAL variable and should be set with SET GLOBAL
+SET global.binlog_stmt_cache_size = 1;
+ERROR 42000: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'binlog_stmt_cache_size = 1' at line 1
+SELECT global.binlog_stmt_cache_size;
+ERROR 42S02: Unknown table 'global' in field list
+SELECT binlog_stmt_cache_size = @@session.binlog_stmt_cache_size;
+ERROR 42S22: Unknown column 'binlog_stmt_cache_size' in 'field list'
+SET @@global.binlog_stmt_cache_size = @start_value;
+SELECT @@global.binlog_stmt_cache_size;
+@@global.binlog_stmt_cache_size
+32768

mysql-test/suite/sys_vars/r/max_binlog_stmt_cache_size_basic.result

+SET @start_value = @@global.max_binlog_stmt_cache_size;
+SELECT @start_value;
+@start_value
+18446744073709547520
+'#--------------------FN_DYNVARS_072_01------------------------#'
+SET @@global.max_binlog_stmt_cache_size = 5000;
+Warnings:
+Warning	1292	Truncated incorrect max_binlog_stmt_cache_size value: '5000'
+SET @@global.max_binlog_stmt_cache_size = DEFAULT;
+SELECT @@global.max_binlog_stmt_cache_size;
+@@global.max_binlog_stmt_cache_size
+18446744073709547520
+'#---------------------FN_DYNVARS_072_02-------------------------#'
+SET @@global.max_binlog_stmt_cache_size = @start_value;
+SELECT @@global.max_binlog_stmt_cache_size = 4294967295;
+@@global.max_binlog_stmt_cache_size = 4294967295
+0
+'#--------------------FN_DYNVARS_072_03------------------------#'
+SET @@global.max_binlog_stmt_cache_size = 4096;
+SELECT @@global.max_binlog_stmt_cache_size;
+@@global.max_binlog_stmt_cache_size
+4096
+SET @@global.max_binlog_stmt_cache_size = 4294967295;
+Warnings:
+Warning	1292	Truncated incorrect max_binlog_stmt_cache_size value: '4294967295'
+SELECT @@global.max_binlog_stmt_cache_size;
+@@global.max_binlog_stmt_cache_size
+4294963200
+SET @@global.max_binlog_stmt_cache_size = 4294967294;
+Warnings:
+Warning	1292	Truncated incorrect max_binlog_stmt_cache_size value: '4294967294'
+SELECT @@global.max_binlog_stmt_cache_size;
+@@global.max_binlog_stmt_cache_size
+4294963200
+SET @@global.max_binlog_stmt_cache_size = 4097;
+Warnings:
+Warning	1292	Truncated incorrect max_binlog_stmt_cache_size value: '4097'
+SELECT @@global.max_binlog_stmt_cache_size;
+@@global.max_binlog_stmt_cache_size
+4096
+SET @@global.max_binlog_stmt_cache_size = 65535;
+Warnings:
+Warning	1292	Truncated incorrect max_binlog_stmt_cache_size value: '65535'
+SELECT @@global.max_binlog_stmt_cache_size;
+@@global.max_binlog_stmt_cache_size
+61440
+'#--------------------FN_DYNVARS_072_04-------------------------#'
+SET @@global.max_binlog_stmt_cache_size = -1;
+Warnings:
+Warning	1292	Truncated incorrect max_binlog_stmt_cache_size value: '-1'
+SELECT @@global.max_binlog_stmt_cache_size;
+@@global.max_binlog_stmt_cache_size
+4096
+SET @@global.max_binlog_stmt_cache_size = 100000000000;
+Warnings:
+Warning	1292	Truncated incorrect max_binlog_stmt_cache_size value: '100000000000'
+SELECT @@global.max_binlog_stmt_cache_size;
+@@global.max_binlog_stmt_cache_size
+99999997952
+SET @@global.max_binlog_stmt_cache_size = 10000.01;
+ERROR 42000: Incorrect argument type to variable 'max_binlog_stmt_cache_size'
+SELECT @@global.max_binlog_stmt_cache_size;
+@@global.max_binlog_stmt_cache_size
+99999997952
+SET @@global.max_binlog_stmt_cache_size = -1024;
+Warnings:
+Warning	1292	Truncated incorrect max_binlog_stmt_cache_size value: '-1024'
+SELECT @@global.max_binlog_stmt_cache_size;
+@@global.max_binlog_stmt_cache_size
+4096
+SET @@global.max_binlog_stmt_cache_size = 1024;
+Warnings:
+Warning	1292	Truncated incorrect max_binlog_stmt_cache_size value: '1024'
+SELECT @@global.max_binlog_stmt_cache_size;
+@@global.max_binlog_stmt_cache_size
+4096
+SET @@global.max_binlog_stmt_cache_size = 4294967296;
+SELECT @@global.max_binlog_stmt_cache_size;
+@@global.max_binlog_stmt_cache_size
+4294967296
+SET @@global.max_binlog_stmt_cache_size = 4095;
+Warnings:
+Warning	1292	Truncated incorrect max_binlog_stmt_cache_size value: '4095'
+SELECT @@global.max_binlog_stmt_cache_size;
+@@global.max_binlog_stmt_cache_size
+4096
+SET @@global.max_binlog_stmt_cache_size = ON;
+ERROR 42000: Incorrect argument type to variable 'max_binlog_stmt_cache_size'
+SELECT @@global.max_binlog_stmt_cache_size;
+@@global.max_binlog_stmt_cache_size
+4096
+SET @@global.max_binlog_stmt_cache_size = 'test';
+ERROR 42000: Incorrect argument type to variable 'max_binlog_stmt_cache_size'
+SELECT @@global.max_binlog_stmt_cache_size;
+@@global.max_binlog_stmt_cache_size
+4096
+'#-------------------FN_DYNVARS_072_05----------------------------#'
+SET @@session.max_binlog_stmt_cache_size = 4096;
+ERROR HY000: Variable 'max_binlog_stmt_cache_size' is a GLOBAL variable and should be set with SET GLOBAL
+SELECT @@session.max_binlog_stmt_cache_size;
+ERROR HY000: Variable 'max_binlog_stmt_cache_size' is a GLOBAL variable
+'#----------------------FN_DYNVARS_072_06------------------------#'
+SELECT @@global.max_binlog_stmt_cache_size = VARIABLE_VALUE 
+FROM INFORMATION_SCHEMA.GLOBAL_VARIABLES 
+WHERE VARIABLE_NAME='max_binlog_stmt_cache_size';
+@@global.max_binlog_stmt_cache_size = VARIABLE_VALUE
+1
+SELECT @@max_binlog_stmt_cache_size = VARIABLE_VALUE 
+FROM INFORMATION_SCHEMA.SESSION_VARIABLES 
+WHERE VARIABLE_NAME='max_binlog_stmt_cache_size';
+@@max_binlog_stmt_cache_size = VARIABLE_VALUE
+1
+'#---------------------FN_DYNVARS_072_07----------------------#'
+SET @@global.max_binlog_stmt_cache_size = TRUE;
+Warnings:
+Warning	1292	Truncated incorrect max_binlog_stmt_cache_size value: '1'
+SELECT @@global.max_binlog_stmt_cache_size;
+@@global.max_binlog_stmt_cache_size
+4096
+SET @@global.max_binlog_stmt_cache_size = FALSE;
+Warnings:
+Warning	1292	Truncated incorrect max_binlog_stmt_cache_size value: '0'
+SELECT @@global.max_binlog_stmt_cache_size;
+@@global.max_binlog_stmt_cache_size
+4096
+'#---------------------FN_DYNVARS_072_08----------------------#'
+SET @@global.max_binlog_stmt_cache_size = 5000;
+Warnings:
+Warning	1292	Truncated incorrect max_binlog_stmt_cache_size value: '5000'
+SELECT @@max_binlog_stmt_cache_size = @@global.max_binlog_stmt_cache_size;
+@@max_binlog_stmt_cache_size = @@global.max_binlog_stmt_cache_size
+1
+'#---------------------FN_DYNVARS_072_09----------------------#'
+SET max_binlog_stmt_cache_size = 6000;
+ERROR HY000: Variable 'max_binlog_stmt_cache_size' is a GLOBAL variable and should be set with SET GLOBAL
+SELECT @@max_binlog_stmt_cache_size;
+@@max_binlog_stmt_cache_size
+4096
+SET local.max_binlog_stmt_cache_size = 7000;
+ERROR 42000: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'max_binlog_stmt_cache_size = 7000' at line 1
+SELECT local.max_binlog_stmt_cache_size;
+ERROR 42S02: Unknown table 'local' in field list
+SET global.max_binlog_stmt_cache_size = 8000;
+ERROR 42000: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'max_binlog_stmt_cache_size = 8000' at line 1
+SELECT global.max_binlog_stmt_cache_size;
+ERROR 42S02: Unknown table 'global' in field list
+SELECT max_binlog_stmt_cache_size = @@session.max_binlog_stmt_cache_size;
+ERROR 42S22: Unknown column 'max_binlog_stmt_cache_size' in 'field list'
+SET @@global.max_binlog_stmt_cache_size = @start_value;
+SELECT @@global.max_binlog_stmt_cache_size;
+@@global.max_binlog_stmt_cache_size
+18446744073709547520

mysql-test/suite/sys_vars/t/binlog_stmt_cache_size_basic_32.test

+################################################################################
+# Wrapper for 32 bit machines                                                  #
+################################################################################
+
+--source include/have_32bit.inc
+--source suite/sys_vars/inc/binlog_stmt_cache_size_basic.inc
+

mysql-test/suite/sys_vars/t/binlog_stmt_cache_size_basic_64.test

+################################################################################
+# Wrapper for 64 bit machines                                                  #
+################################################################################
+
+--source include/have_64bit.inc
+--source suite/sys_vars/inc/binlog_stmt_cache_size_basic.inc
+

mysql-test/suite/sys_vars/t/max_binlog_cache_size_func-master.opt

---log-bin
---innodb

mysql-test/suite/sys_vars/t/max_binlog_stmt_cache_size_basic.test

+############ mysql-test\t\max_binlog_stmt_cache_size_basic.test ###############
+#                                                                             #
+# Variable Name: max_binlog_stmt_cache_size                                   #
+# Scope: GLOBAL                                                               #
+# Access Type: Dynamic                                                        #
+# Data Type: numeric                                                          #
+# Default Value:4294967295                                                    #
+# Range: 4096-4294967295                                                      #
+#                                                                             #
+#                                                                             #
+#                                                                             #
+#                                                                             #
+#                                                                             #
+# Creation Date: 2010-11-05                                                   #
+# Author:  Alfranio                                                           #
+#                                                                             #
+# Description: Test Cases of Dynamic System Variable                          #
+#              max_binlog_stmt_cache_size that checks                         #
+#              the behavior of this variable in the following ways            #
+#              * Default Value                                                #
+#              * Valid & Invalid values                                       #
+#              * Scope & Access method                                        #
+#              * Data Integrity                                               #
+#                                                                             #
+# Reference: http://dev.mysql.com/doc/refman/5.5/en/                          #
+#  server-system-variables.html                                               #
+#                                                                             #
+###############################################################################
+
+--source include/load_sysvars.inc
+
+########################################################################## 
+#           START OF max_binlog_stmt_cache_size TESTS                    #
+########################################################################## 
+
+
+############################################################################## 
+# Saving initial value of max_binlog_stmt_cache_size in a temporary variable #
+############################################################################## 
+
+SET @start_value = @@global.max_binlog_stmt_cache_size;
+SELECT @start_value;
+
+
+--echo '#--------------------FN_DYNVARS_072_01------------------------#'
+######################################################################## 
+#       Display the DEFAULT value of max_binlog_stmt_cache_size        #
+######################################################################## 
+
+SET @@global.max_binlog_stmt_cache_size = 5000;
+SET @@global.max_binlog_stmt_cache_size = DEFAULT;
+SELECT @@global.max_binlog_stmt_cache_size;
+
+
+--echo '#---------------------FN_DYNVARS_072_02-------------------------#'
+############################################### 
+#     Verify default value of variable        #
+############################################### 
+
+SET @@global.max_binlog_stmt_cache_size = @start_value;
+SELECT @@global.max_binlog_stmt_cache_size = 4294967295;
+
+--echo '#--------------------FN_DYNVARS_072_03------------------------#'
+######################################################################## 
+#   Change the value of max_binlog_stmt_cache_size to a valid value    #
+######################################################################## 
+
+SET @@global.max_binlog_stmt_cache_size = 4096;
+SELECT @@global.max_binlog_stmt_cache_size;
+SET @@global.max_binlog_stmt_cache_size = 4294967295;
+SELECT @@global.max_binlog_stmt_cache_size;
+SET @@global.max_binlog_stmt_cache_size = 4294967294;
+SELECT @@global.max_binlog_stmt_cache_size;
+SET @@global.max_binlog_stmt_cache_size = 4097;
+SELECT @@global.max_binlog_stmt_cache_size;
+SET @@global.max_binlog_stmt_cache_size = 65535;
+SELECT @@global.max_binlog_stmt_cache_size;
+
+
+--echo '#--------------------FN_DYNVARS_072_04-------------------------#'
+########################################################################### 
+#     Change the value of max_binlog_stmt_cache_size to invalid value     #
+########################################################################### 
+
+SET @@global.max_binlog_stmt_cache_size = -1;
+SELECT @@global.max_binlog_stmt_cache_size;
+SET @@global.max_binlog_stmt_cache_size = 100000000000;
+SELECT @@global.max_binlog_stmt_cache_size;
+--Error ER_WRONG_TYPE_FOR_VAR
+SET @@global.max_binlog_stmt_cache_size = 10000.01;
+SELECT @@global.max_binlog_stmt_cache_size;
+SET @@global.max_binlog_stmt_cache_size = -1024;
+SELECT @@global.max_binlog_stmt_cache_size;
+SET @@global.max_binlog_stmt_cache_size = 1024;
+SELECT @@global.max_binlog_stmt_cache_size;
+SET @@global.max_binlog_stmt_cache_size = 4294967296;
+SELECT @@global.max_binlog_stmt_cache_size;
+SET @@global.max_binlog_stmt_cache_size = 4095;
+SELECT @@global.max_binlog_stmt_cache_size;
+
+--Error ER_WRONG_TYPE_FOR_VAR
+SET @@global.max_binlog_stmt_cache_size = ON;
+SELECT @@global.max_binlog_stmt_cache_size;
+--Error ER_WRONG_TYPE_FOR_VAR
+SET @@global.max_binlog_stmt_cache_size = 'test';
+SELECT @@global.max_binlog_stmt_cache_size;
+
+
+--echo '#-------------------FN_DYNVARS_072_05----------------------------#'
+########################################################################### 
+#    Test if accessing session max_binlog_stmt_cache_size gives error     #
+########################################################################### 
+
+--Error ER_GLOBAL_VARIABLE
+SET @@session.max_binlog_stmt_cache_size = 4096;
+--Error ER_INCORRECT_GLOBAL_LOCAL_VAR
+SELECT @@session.max_binlog_stmt_cache_size;
+
+
+--echo '#----------------------FN_DYNVARS_072_06------------------------#'
+############################################################################## 
+# Check if the value in GLOBAL & SESSION Tables matches values in variable   #
+##############################################################################
+
+SELECT @@global.max_binlog_stmt_cache_size = VARIABLE_VALUE 
+FROM INFORMATION_SCHEMA.GLOBAL_VARIABLES 
+WHERE VARIABLE_NAME='max_binlog_stmt_cache_size';
+
+SELECT @@max_binlog_stmt_cache_size = VARIABLE_VALUE 
+FROM INFORMATION_SCHEMA.SESSION_VARIABLES 
+WHERE VARIABLE_NAME='max_binlog_stmt_cache_size';
+
+
+--echo '#---------------------FN_DYNVARS_072_07----------------------#'
+################################################################### 
+#      Check if TRUE and FALSE values can be used on variable     #
+################################################################### 
+
+SET @@global.max_binlog_stmt_cache_size = TRUE;
+SELECT @@global.max_binlog_stmt_cache_size;
+SET @@global.max_binlog_stmt_cache_size = FALSE;
+SELECT @@global.max_binlog_stmt_cache_size;
+
+
+--echo '#---------------------FN_DYNVARS_072_08----------------------#'
+########################################################################################################
+#   Check if accessing variable with SESSION,LOCAL and without SCOPE points to same session variable   #
+########################################################################################################
+
+SET @@global.max_binlog_stmt_cache_size = 5000;
+SELECT @@max_binlog_stmt_cache_size = @@global.max_binlog_stmt_cache_size;
+
+
+--echo '#---------------------FN_DYNVARS_072_09----------------------#'
+################################################################################  
+# Check if max_binlog_stmt_cache_size can be accessed with and without @@ sign #
+################################################################################
+
+--Error ER_GLOBAL_VARIABLE
+SET max_binlog_stmt_cache_size = 6000;
+SELECT @@max_binlog_stmt_cache_size;
+--Error ER_PARSE_ERROR
+SET local.max_binlog_stmt_cache_size = 7000;
+--Error ER_UNKNOWN_TABLE
+SELECT local.max_binlog_stmt_cache_size;
+--Error ER_PARSE_ERROR
+SET global.max_binlog_stmt_cache_size = 8000;
+--Error ER_UNKNOWN_TABLE
+SELECT global.max_binlog_stmt_cache_size;
+--Error ER_BAD_FIELD_ERROR
+SELECT max_binlog_stmt_cache_size = @@session.max_binlog_stmt_cache_size;
+
+
+##############################  
+#   Restore initial value    #
+##############################
+
+SET @@global.max_binlog_stmt_cache_size = @start_value;
+SELECT @@global.max_binlog_stmt_cache_size;
+
+
+######################################################################## 
+#           END OF max_binlog_stmt_cache_size TESTS                    #
+######################################################################## 

sql/log.h

@@ -415,7 +415,7 @@ public:
   bool write_incident(THD *thd, bool lock);
 
   int  write_cache(IO_CACHE *cache, bool lock_log, bool flush_and_sync);
-  void set_write_error(THD *thd);
+  void set_write_error(THD *thd, bool is_transactional);
   bool check_write_error(THD *thd);
 
   void start_union_events(THD *thd, query_id_t query_id_param);

sql/log_event.h

@@ -2506,7 +2506,7 @@ class Xid_log_event: public Log_event
    my_xid xid;
 
 #ifdef MYSQL_SERVER
-  Xid_log_event(THD* thd_arg, my_xid x): Log_event(thd_arg,0,0), xid(x) {}
+  Xid_log_event(THD* thd_arg, my_xid x): Log_event(thd_arg, 0, TRUE), xid(x) {}
 #ifdef HAVE_REPLICATION
   void pack_info(Protocol* protocol);
 #endif /* HAVE_REPLICATION */

sql/mysqld.cc

@@ -461,6 +461,8 @@ ulonglong slave_type_conversions_options;
 ulong thread_cache_size=0;
 ulong binlog_cache_size=0;
 ulonglong  max_binlog_cache_size=0;
+ulong binlog_stmt_cache_size=0;
+ulonglong  max_binlog_stmt_cache_size=0;
 ulong query_cache_size=0;
 ulong refresh_version;  /* Increments on each reload */
 query_id_t global_query_id;
@@ -472,6 +474,7 @@ ulong delayed_insert_threads, delayed_insert_writes, delayed_rows_in_use;
 ulong delayed_insert_errors,flush_time;
 ulong specialflag=0;
 ulong binlog_cache_use= 0, binlog_cache_disk_use= 0;
+ulong binlog_stmt_cache_use= 0, binlog_stmt_cache_disk_use= 0;
 ulong max_connections, max_connect_errors;
 /**
   Limit of the total number of prepared statements in the server.
@@ -6407,6 +6410,8 @@ SHOW_VAR status_vars[]= {
   {"Aborted_connects",         (char*) &aborted_connects,       SHOW_LONG},
   {"Binlog_cache_disk_use",    (char*) &binlog_cache_disk_use,  SHOW_LONG},
   {"Binlog_cache_use",         (char*) &binlog_cache_use,       SHOW_LONG},
+  {"Binlog_stmt_cache_disk_use",(char*) &binlog_stmt_cache_disk_use,  SHOW_LONG},
+  {"Binlog_stmt_cache_use",    (char*) &binlog_stmt_cache_use,       SHOW_LONG},
   {"Bytes_received",           (char*) offsetof(STATUS_VAR, bytes_received), SHOW_LONGLONG_STATUS},
   {"Bytes_sent",               (char*) offsetof(STATUS_VAR, bytes_sent), SHOW_LONGLONG_STATUS},
   {"Com",                      (char*) com_status_vars, SHOW_ARRAY},

sql/mysqld.h

@@ -152,6 +152,7 @@ extern ulonglong keybuff_size;
 extern ulonglong thd_startup_options;
 extern ulong thread_id;
 extern ulong binlog_cache_use, binlog_cache_disk_use;
+extern ulong binlog_stmt_cache_use, binlog_stmt_cache_disk_use;
 extern ulong aborted_threads,aborted_connects;
 extern ulong delayed_insert_timeout;
 extern ulong delayed_insert_limit, delayed_queue_size;
@@ -171,8 +172,9 @@ extern uint  slave_net_timeout;
 extern uint max_user_connections;
 extern ulong what_to_log,flush_time;
 extern ulong max_prepared_stmt_count, prepared_stmt_count;
-extern ulong binlog_cache_size, open_files_limit;
-extern ulonglong max_binlog_cache_size;
+extern ulong open_files_limit;
+extern ulong binlog_cache_size, binlog_stmt_cache_size;
+extern ulonglong max_binlog_cache_size, max_binlog_stmt_cache_size;
 extern ulong max_binlog_size, max_relay_log_size;
 extern ulong opt_binlog_rows_event_max_size;
 extern ulong rpl_recovery_rank, thread_cache_size;

sql/share/errmsg-utf8.txt

@@ -6392,3 +6392,5 @@ ER_SLAVE_HEARTBEAT_VALUE_OUT_OF_RANGE_MIN
 ER_SLAVE_HEARTBEAT_VALUE_OUT_OF_RANGE_MAX
   eng "The requested value for the heartbeat period exceeds the value of `slave_net_timeout' seconds. A sensible value for the period should be less than the timeout."
 
+ER_STMT_CACHE_FULL  
+        eng "Multi-row statements required more than 'max_binlog_stmt_cache_size' bytes of storage; increase this mysqld variable and try again"

sql/sys_vars.cc

@@ -236,14 +236,23 @@ static Sys_var_charptr Sys_basedir(
        IN_FS_CHARSET, DEFAULT(0));
 
 static Sys_var_ulong Sys_binlog_cache_size(
-       "binlog_cache_size", "The size of the cache to "
-       "hold the SQL statements for the binary log during a "
-       "transaction. If you often use big, multi-statement "
-       "transactions you can increase this to get more performance",
+       "binlog_cache_size", "The size of the transactional cache for "
+       "updates to transactional engines for the binary log. "
+       "If you often use transactions containing many statements, "
+       "you can increase this to get more performance",
        GLOBAL_VAR(binlog_cache_size),
        CMD_LINE(REQUIRED_ARG),
        VALID_RANGE(IO_SIZE, ULONG_MAX), DEFAULT(32768), BLOCK_SIZE(IO_SIZE));
 
+static Sys_var_ulong Sys_binlog_stmt_cache_size(
+       "binlog_stmt_cache_size", "The size of the statement cache for "
+       "updates to non-transactional engines for the binary log. "
+       "If you often use statements updating a great number of rows, "
+       "you can increase this to get more performance",
+       GLOBAL_VAR(binlog_stmt_cache_size),
+       CMD_LINE(REQUIRED_ARG),
+       VALID_RANGE(IO_SIZE, ULONG_MAX), DEFAULT(32768), BLOCK_SIZE(IO_SIZE));
+
 static bool check_has_super(sys_var *self, THD *thd, set_var *var)
 {
   DBUG_ASSERT(self->scope() != sys_var::GLOBAL);// don't abuse check_has_super()
@@ -1031,13 +1040,20 @@ static Sys_var_ulong Sys_max_allowed_packet(
 
 static Sys_var_ulonglong Sys_max_binlog_cache_size(
        "max_binlog_cache_size",
-       "Can be used to restrict the total size used to cache a "
-       "multi-transaction query",
+       "Sets the total size of the transactional cache",
        GLOBAL_VAR(max_binlog_cache_size), CMD_LINE(REQUIRED_ARG),
        VALID_RANGE(IO_SIZE, ULONGLONG_MAX),
        DEFAULT((ULONGLONG_MAX/IO_SIZE)*IO_SIZE),
        BLOCK_SIZE(IO_SIZE));
 
+static Sys_var_ulonglong Sys_max_binlog_stmt_cache_size(
+       "max_binlog_stmt_cache_size",
+       "Sets the total size of the statement cache",
+       GLOBAL_VAR(max_binlog_stmt_cache_size), CMD_LINE(REQUIRED_ARG),
+       VALID_RANGE(IO_SIZE, ULONGLONG_MAX),
+       DEFAULT((ULONGLONG_MAX/IO_SIZE)*IO_SIZE),
+       BLOCK_SIZE(IO_SIZE));
+
 static bool fix_max_binlog_size(sys_var *self, THD *thd, enum_var_type type)
 {
   mysql_bin_log.set_max_size(max_binlog_size);