BUG#50670: Slave stops with error code 1644

Clarified error messages related to unsafe statements:
 - avoid the internal technical term "row injection"
 - use 'binary log' instead of 'binlog'
 - avoid the word 'unsafeness'

mysql-test/extra/binlog_tests/blackhole.test

@@ -6,7 +6,7 @@
 -- source include/have_blackhole.inc
 -- source include/have_log_bin.inc
 
-CALL mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+CALL mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 
 # The server need to be started in $MYSQLTEST_VARDIR since it
 # uses ../../std_data/

mysql-test/extra/binlog_tests/mix_innodb_myisam_binlog.test

@@ -8,7 +8,7 @@
 -- source include/have_log_bin.inc
 -- source include/have_innodb.inc
 
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 
 --disable_warnings
 drop table if exists t1, t2;

mysql-test/extra/rpl_tests/rpl_binlog_max_cache_size.test

@@ -22,7 +22,7 @@
 #    
 ########################################################################################
 
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 
 CREATE TABLE t1(a INT PRIMARY KEY, data VARCHAR(30000)) ENGINE=Innodb;
 CREATE TABLE t2(a INT PRIMARY KEY, data VARCHAR(30000)) ENGINE=MyIsam;

mysql-test/extra/rpl_tests/rpl_insert_id.test

@@ -9,7 +9,7 @@
 # column and index but without primary key.
 ##############################################################
 
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 
 --echo #
 --echo # Setup

mysql-test/extra/rpl_tests/rpl_loaddata.test

@@ -19,7 +19,7 @@ reset master;
 connection master;
 
 --disable_query_log
-CALL mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+CALL mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 --enable_query_log
 
 # MTR is not case-sensitive.

mysql-test/extra/rpl_tests/rpl_mixing_engines.test

@@ -245,7 +245,7 @@
 --echo #                            CONFIGURATION
 --echo #########################################################################
 
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 
 SET @commands= 'configure';
 --source extra/rpl_tests/rpl_mixing_engines.inc

mysql-test/extra/rpl_tests/rpl_start_stop_slave.test

@@ -4,10 +4,10 @@
 # Let the master do lots of insertions
 
 connection master;
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 
 connection slave;
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 
 connection master;
 create table t1(n int);

mysql-test/extra/rpl_tests/rpl_stm_000001.test

@@ -3,7 +3,7 @@
 -- source include/have_binlog_format_statement.inc
 -- source include/master-slave.inc
 
-CALL mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+CALL mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 
 # Load some data into t1
 create table t1 (word char(20) not null);

mysql-test/extra/rpl_tests/rpl_stop_middle_group.test

@@ -7,7 +7,7 @@
 
 connection master;
 
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 
 create table tm (a int auto_increment primary key) engine=myisam;
 create table ti (a int auto_increment primary key) engine=innodb;

mysql-test/r/archive.result

-CALL mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+CALL mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 DROP TABLE if exists t1,t2,t3,t4,t5,t6;
 SET storage_engine=ARCHIVE;
 CREATE TABLE t1 (

mysql-test/r/commit_1innodb.result

-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 set sql_mode=no_engine_substitution;
 set storage_engine = InnoDB;
 set autocommit=1;

mysql-test/r/ctype_cp932_binlog_stm.result

@@ -38,22 +38,22 @@ master-bin.000001	514	Query	1	581	BEGIN
 master-bin.000001	581	Query	1	788	use `mtr`; INSERT INTO test_suppressions (pattern) VALUES ( NAME_CONST('pattern',_latin1'Error in Log_event::read_log_event()' COLLATE 'latin1_swedish_ci'))
 master-bin.000001	788	Query	1	856	COMMIT
 master-bin.000001	856	Query	1	923	BEGIN
-master-bin.000001	923	Query	1	1172	use `mtr`; INSERT INTO test_suppressions (pattern) VALUES ( NAME_CONST('pattern',_latin1'Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT' COLLATE 'latin1_swedish_ci'))
-master-bin.000001	1172	Query	1	1240	COMMIT
-master-bin.000001	1240	Query	1	1403	use `test`; CREATE TABLE t4 (s1 CHAR(50) CHARACTER SET latin1,
+master-bin.000001	923	Query	1	1191	use `mtr`; INSERT INTO test_suppressions (pattern) VALUES ( NAME_CONST('pattern',_latin1'Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT' COLLATE 'latin1_swedish_ci'))
+master-bin.000001	1191	Query	1	1259	COMMIT
+master-bin.000001	1259	Query	1	1422	use `test`; CREATE TABLE t4 (s1 CHAR(50) CHARACTER SET latin1,
 s2 CHAR(50) CHARACTER SET cp932,
 d DECIMAL(10,2))
-master-bin.000001	1403	Query	1	1649	use `test`; CREATE DEFINER=`root`@`localhost` PROCEDURE `bug18293`(IN ins1 CHAR(50),
+master-bin.000001	1422	Query	1	1668	use `test`; CREATE DEFINER=`root`@`localhost` PROCEDURE `bug18293`(IN ins1 CHAR(50),
 IN ins2 CHAR(50) CHARACTER SET cp932,
 IN ind DECIMAL(10,2))
 BEGIN
 INSERT INTO t4 VALUES (ins1, ins2, ind);
 END
-master-bin.000001	1649	Query	1	1717	BEGIN
-master-bin.000001	1717	Query	1	1981	use `test`; INSERT INTO t4 VALUES ( NAME_CONST('ins1',_latin1 0x466F6F2773206120426172 COLLATE 'latin1_swedish_ci'),  NAME_CONST('ins2',_cp932 0xED40ED41ED42 COLLATE 'cp932_japanese_ci'),  NAME_CONST('ind',47.93))
-master-bin.000001	1981	Query	1	2050	COMMIT
-master-bin.000001	2050	Query	1	2136	use `test`; DROP PROCEDURE bug18293
-master-bin.000001	2136	Query	1	2212	use `test`; DROP TABLE t4
+master-bin.000001	1668	Query	1	1736	BEGIN
+master-bin.000001	1736	Query	1	2000	use `test`; INSERT INTO t4 VALUES ( NAME_CONST('ins1',_latin1 0x466F6F2773206120426172 COLLATE 'latin1_swedish_ci'),  NAME_CONST('ins2',_cp932 0xED40ED41ED42 COLLATE 'cp932_japanese_ci'),  NAME_CONST('ind',47.93))
+master-bin.000001	2000	Query	1	2069	COMMIT
+master-bin.000001	2069	Query	1	2155	use `test`; DROP PROCEDURE bug18293
+master-bin.000001	2155	Query	1	2231	use `test`; DROP TABLE t4
 End of 5.0 tests
 SHOW BINLOG EVENTS FROM 490;
 ERROR HY000: Error when executing command SHOW BINLOG EVENTS: Wrong offset or I/O error

mysql-test/r/partition_innodb_stmt.result

@@ -42,7 +42,7 @@ id
 SET TRANSACTION ISOLATION LEVEL READ COMMITTED;
 BEGIN;
 INSERT INTO t1 VALUES(9);
-ERROR HY000: Cannot execute statement: binlogging impossible since BINLOG_FORMAT = STATEMENT and at least one table uses a storage engine limited to row-logging. InnoDB is limited to row-logging when transaction isolation level is READ COMMITTED or READ UNCOMMITTED.
+ERROR HY000: Cannot execute statement: impossible to write to binary log since BINLOG_FORMAT = STATEMENT and at least one table uses a storage engine limited to row-based logging. InnoDB is limited to row-logging when transaction isolation level is READ COMMITTED or READ UNCOMMITTED.
 COMMIT;
 COMMIT;
 DROP TABLE t1;

mysql-test/suite/binlog/r/binlog_innodb.result

@@ -14,12 +14,12 @@ SET BINLOG_FORMAT=STATEMENT;
 BEGIN;
 SET SESSION TRANSACTION ISOLATION LEVEL READ UNCOMMITTED;
 UPDATE t1 SET b = 1*a WHERE a > 1;
-ERROR HY000: Cannot execute statement: binlogging impossible since BINLOG_FORMAT = STATEMENT and at least one table uses a storage engine limited to row-logging. InnoDB is limited to row-logging when transaction isolation level is READ COMMITTED or READ UNCOMMITTED.
+ERROR HY000: Cannot execute statement: impossible to write to binary log since BINLOG_FORMAT = STATEMENT and at least one table uses a storage engine limited to row-based logging. InnoDB is limited to row-logging when transaction isolation level is READ COMMITTED or READ UNCOMMITTED.
 COMMIT;
 BEGIN;
 SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED;
 UPDATE t1 SET b = 2*a WHERE a > 2;
-ERROR HY000: Cannot execute statement: binlogging impossible since BINLOG_FORMAT = STATEMENT and at least one table uses a storage engine limited to row-logging. InnoDB is limited to row-logging when transaction isolation level is READ COMMITTED or READ UNCOMMITTED.
+ERROR HY000: Cannot execute statement: impossible to write to binary log since BINLOG_FORMAT = STATEMENT and at least one table uses a storage engine limited to row-based logging. InnoDB is limited to row-logging when transaction isolation level is READ COMMITTED or READ UNCOMMITTED.
 COMMIT;
 BEGIN;
 SET SESSION TRANSACTION ISOLATION LEVEL REPEATABLE READ;

mysql-test/suite/binlog/r/binlog_killed.result

-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 create table t1 (a int auto_increment, b int, PRIMARY KEY (a)) ENGINE=InnoDB;
 create table t2 (a int auto_increment, b int, PRIMARY KEY (a)) ENGINE=MyISAM;
 create table t3 (a int auto_increment, b int, PRIMARY KEY (a)) ENGINE=InnoDB;

mysql-test/suite/binlog/r/binlog_multi_engine.result

-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 CREATE TABLE t1m (m INT, n INT) ENGINE=MYISAM;
 CREATE TABLE t1b (b INT, c INT) ENGINE=BLACKHOLE;
 CREATE TABLE t1n (e INT, f INT) ENGINE=NDB;
@@ -8,14 +8,14 @@ INSERT INTO t1b VALUES (1,1), (1,2), (2,1), (2,2);
 INSERT INTO t1m VALUES (1,1), (1,2), (2,1), (2,2);
 UPDATE t1m, t1b SET m = 2, b = 3 WHERE n = c;
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statements that read from both transactional (or a temporary table of any engine type) and non-transactional tables and write to any of them are unsafe.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statements that read from both transactional (or a temporary table of any engine type) and non-transactional tables and write to any of them are unsafe.
 The last event before the COMMIT is use `test`; UPDATE t1m, t1b SET m = 2, b = 3 WHERE n = c
 *** Please look in binlog_multi_engine.test if you have a diff here ****
 START TRANSACTION;
 INSERT INTO t1n VALUES (1,1), (1,2), (2,1), (2,2);
 UPDATE t1m, t1n SET m = 2, e = 3 WHERE n = f;
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statements that read from both transactional (or a temporary table of any engine type) and non-transactional tables and write to any of them are unsafe.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statements that read from both transactional (or a temporary table of any engine type) and non-transactional tables and write to any of them are unsafe.
 UPDATE t1n, t1b SET e = 2, b = 3 WHERE f = c;
 COMMIT;
 TRUNCATE t1m;
@@ -55,7 +55,7 @@ The last event before the COMMIT is use `test`; INSERT INTO t1m VALUES (1,1), (1
 INSERT INTO t1n VALUES (1,1), (1,2), (2,1), (2,2);
 UPDATE t1m, t1b SET m = 2, b = 3 WHERE n = c;
 UPDATE t1m, t1n SET m = 2, e = 3 WHERE n = f;
-ERROR HY000: Cannot execute statement: binlogging impossible since more than one engine is involved and at least one engine is self-logging.
+ERROR HY000: Cannot execute statement: impossible to write to binary log since more than one engine is involved and at least one engine is self-logging.
 TRUNCATE t1m;
 TRUNCATE t1b;
 TRUNCATE t1n;
@@ -82,9 +82,9 @@ INSERT INTO t1m VALUES (1,1), (1,2), (2,1), (2,2);
 INSERT INTO t1b VALUES (1,1), (1,2), (2,1), (2,2);
 INSERT INTO t1n VALUES (1,1), (1,2), (2,1), (2,2);
 UPDATE t1m, t1n SET m = 2, e = 3 WHERE n = f;
-ERROR HY000: Cannot execute statement: binlogging impossible since more than one engine is involved and at least one engine is self-logging.
+ERROR HY000: Cannot execute statement: impossible to write to binary log since more than one engine is involved and at least one engine is self-logging.
 UPDATE t1n, t1b SET e = 2, b = 3 WHERE f = c;
-ERROR HY000: Cannot execute statement: binlogging impossible since more than one engine is involved and at least one engine is self-logging.
+ERROR HY000: Cannot execute statement: impossible to write to binary log since more than one engine is involved and at least one engine is self-logging.
 show binlog events from <binlog_start>;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 mysqld-bin.000001	#	Query	#	#	BEGIN

mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result

-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 drop table if exists t1, t2;
 create table t1 (a int) engine=innodb;
 create table t2 (a int) engine=myisam;

mysql-test/suite/binlog/r/binlog_statement_insert_delayed.result

@@ -6,7 +6,7 @@ FLUSH TABLES;
 show binlog events from <binlog_start>;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN
-master-bin.000001	#	Query	#	#	use `mtr`; INSERT INTO test_suppressions (pattern) VALUES ( NAME_CONST('pattern',_latin1'Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT' COLLATE 'latin1_swedish_ci'))
+master-bin.000001	#	Query	#	#	use `mtr`; INSERT INTO test_suppressions (pattern) VALUES ( NAME_CONST('pattern',_latin1'Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT' COLLATE 'latin1_swedish_ci'))
 master-bin.000001	#	Query	#	#	COMMIT
 master-bin.000001	#	Query	#	#	use `test`; create table t1 (a int not null auto_increment, primary key (a)) engine=myisam
 master-bin.000001	#	Query	#	#	BEGIN
@@ -22,10 +22,10 @@ master-bin.000001	#	Query	#	#	COMMIT
 master-bin.000001	#	Query	#	#	use `test`; FLUSH TABLES
 insert delayed into t1 values (null),(null),(null),(null);
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statement uses INSERT DELAYED. This is unsafe because the time when rows are inserted cannot be predicted.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. The statement is unsafe because it uses INSERT DELAYED. This is unsafe because the times when rows are inserted cannot be predicted.
 insert delayed into t1 values (null),(null),(400),(null);
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statement uses INSERT DELAYED. This is unsafe because the time when rows are inserted cannot be predicted.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. The statement is unsafe because it uses INSERT DELAYED. This is unsafe because the times when rows are inserted cannot be predicted.
 select * from t1;
 a
 207

mysql-test/suite/binlog/r/binlog_stm_blackhole.result

-CALL mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+CALL mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 drop table if exists t1,t2;
 CREATE TABLE t1 (
 Period smallint(4) unsigned zerofill DEFAULT '0000' NOT NULL,

mysql-test/suite/binlog/r/binlog_stm_do_db.result

@@ -25,11 +25,11 @@ use b42829;
 ###            binlog-do-db is not filtering  used database 
 BEGIN;
 INSERT INTO t2 VALUES (1,2), (1,3), (1,4);
-ERROR HY000: Cannot execute statement: binlogging impossible since BINLOG_FORMAT = STATEMENT and at least one table uses a storage engine limited to row-logging. InnoDB is limited to row-logging when transaction isolation level is READ COMMITTED or READ UNCOMMITTED.
+ERROR HY000: Cannot execute statement: impossible to write to binary log since BINLOG_FORMAT = STATEMENT and at least one table uses a storage engine limited to row-based logging. InnoDB is limited to row-logging when transaction isolation level is READ COMMITTED or READ UNCOMMITTED.
 UPDATE b42829_filtered.t1 ft1, b42829.t1 nft1 SET ft1.x=1, nft1.x=2;
-ERROR HY000: Cannot execute statement: binlogging impossible since BINLOG_FORMAT = STATEMENT and at least one table uses a storage engine limited to row-logging. InnoDB is limited to row-logging when transaction isolation level is READ COMMITTED or READ UNCOMMITTED.
+ERROR HY000: Cannot execute statement: impossible to write to binary log since BINLOG_FORMAT = STATEMENT and at least one table uses a storage engine limited to row-based logging. InnoDB is limited to row-logging when transaction isolation level is READ COMMITTED or READ UNCOMMITTED.
 INSERT INTO t1 SELECT * FROM t2;
-ERROR HY000: Cannot execute statement: binlogging impossible since BINLOG_FORMAT = STATEMENT and at least one table uses a storage engine limited to row-logging. InnoDB is limited to row-logging when transaction isolation level is READ COMMITTED or READ UNCOMMITTED.
+ERROR HY000: Cannot execute statement: impossible to write to binary log since BINLOG_FORMAT = STATEMENT and at least one table uses a storage engine limited to row-based logging. InnoDB is limited to row-logging when transaction isolation level is READ COMMITTED or READ UNCOMMITTED.
 COMMIT;
 ### assertion: filtered events did not make into the binlog
 show binlog events from <binlog_start>;

mysql-test/suite/binlog/r/binlog_stm_ps.result

@@ -11,7 +11,7 @@ prepare s from "insert into t1 select 100 limit ?";
 set @a=100;
 execute s using @a;
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statement uses a LIMIT clause. This is unsafe because the set of rows included cannot be predicted.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. The statement is unsafe because it uses a LIMIT clause. This is unsafe because the set of rows included cannot be predicted.
 show binlog events from <binlog_start>;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	use `test`; create table t1 (a int)

mysql-test/suite/binlog/r/binlog_stm_row.result

-CALL mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+CALL mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 DROP TABLE IF EXISTS t1;
 DROP TABLE IF EXISTS t2;
 set @saved_global_binlog_format = @@global.binlog_format;
@@ -31,7 +31,7 @@ RELEASE_LOCK('Bug#34306')
 1
 # con2
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statement uses a system function whose value may differ on slave.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it uses a system function that may return a different value on the slave.
 SELECT RELEASE_LOCK('Bug#34306');
 RELEASE_LOCK('Bug#34306')
 1

mysql-test/suite/binlog/r/binlog_stm_unsafe_warning.result

-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statement uses a LIMIT clause. This is unsafe because the set of rows included cannot be predicted. .*");
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statement uses a system function whose value may differ on slave. .*");
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statement invokes a trigger or a stored function that inserts into AUTO_INCREMENT column");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT.");
 ### NOT filtered database => assertion: warnings ARE shown
 DROP TABLE IF EXISTS t1;
 CREATE TABLE t1 (a int, b int, primary key (a));
 INSERT INTO t1 VALUES (1,2), (2,3);
 UPDATE t1 SET b='4' WHERE a=1 LIMIT 1;
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statement uses a LIMIT clause. This is unsafe because the set of rows included cannot be predicted.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. The statement is unsafe because it uses a LIMIT clause. This is unsafe because the set of rows included cannot be predicted.
 UPDATE t1 SET b='5' WHERE a=2 ORDER BY a LIMIT 1;
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statement uses a LIMIT clause. This is unsafe because the set of rows included cannot be predicted.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. The statement is unsafe because it uses a LIMIT clause. This is unsafe because the set of rows included cannot be predicted.
 DROP TABLE t1;
 ### NOT filtered database => assertion: binlog disabled and warnings ARE NOT shown
 SET SQL_LOG_BIN= 0;
@@ -41,11 +39,11 @@ CREATE TABLE t1 (a VARCHAR(36), b VARCHAR(10));
 SET GLOBAL LOG_WARNINGS = 0;
 INSERT INTO t1 VALUES(UUID(), 'Bug#46265');
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statement uses a system function whose value may differ on slave.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it uses a system function that may return a different value on the slave.
 SET GLOBAL LOG_WARNINGS = 1;
 INSERT INTO t1 VALUES(UUID(), 'Bug#46265');
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statement uses a system function whose value may differ on slave.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it uses a system function that may return a different value on the slave.
 DROP TABLE t1;
 SET GLOBAL log_warnings = @old_log_warnings;
 # Count the number of times the "Unsafe" message was printed
@@ -62,18 +60,18 @@ RETURN 1;
 END |
 INSERT INTO t1 VALUES (0);
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statement invokes a trigger or a stored function that inserts into AUTO_INCREMENT column which is unsafe to binlog in STATEMENT format because slave may execute it non-deterministically.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it invokes a trigger or a stored function that inserts into an AUTO_INCREMENT column. Inserted values cannot be logged correctly.
 SHOW WARNINGS;
 Level	Code	Message
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statement invokes a trigger or a stored function that inserts into AUTO_INCREMENT column which is unsafe to binlog in STATEMENT format because slave may execute it non-deterministically.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it invokes a trigger or a stored function that inserts into an AUTO_INCREMENT column. Inserted values cannot be logged correctly.
 SELECT sf_bug50192();
 sf_bug50192()
 1
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statement invokes a trigger or a stored function that inserts into AUTO_INCREMENT column which is unsafe to binlog in STATEMENT format because slave may execute it non-deterministically.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it invokes a trigger or a stored function that inserts into an AUTO_INCREMENT column. Inserted values cannot be logged correctly.
 SHOW WARNINGS;
 Level	Code	Message
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statement invokes a trigger or a stored function that inserts into AUTO_INCREMENT column which is unsafe to binlog in STATEMENT format because slave may execute it non-deterministically.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it invokes a trigger or a stored function that inserts into an AUTO_INCREMENT column. Inserted values cannot be logged correctly.
 DROP FUNCTION sf_bug50192;
 DROP TRIGGER tr_bug50192;
 DROP TABLE t1, t2;

mysql-test/suite/binlog/t/binlog_killed.test

 -- source include/have_innodb.inc
 -- source include/have_binlog_format_statement.inc
 
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 
 # You cannot use `KILL' with the Embedded MySQL Server library,
 # because the embedded server merely runs inside the threads of the host

mysql-test/suite/binlog/t/binlog_multi_engine.test

@@ -7,7 +7,7 @@ source include/have_blackhole.inc;
 source include/have_ndb.inc;
 source include/have_log_bin.inc;
 
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 
 CREATE TABLE t1m (m INT, n INT) ENGINE=MYISAM;
 CREATE TABLE t1b (b INT, c INT) ENGINE=BLACKHOLE;

mysql-test/suite/binlog/t/binlog_statement_insert_delayed.test

@@ -7,6 +7,6 @@
 reset master; # get rid of previous tests binlog
 -- enable_query_log
 disable_query_log;
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 enable_query_log;
 -- source extra/binlog_tests/binlog_insert_delayed.test

mysql-test/suite/binlog/t/binlog_stm_ps.test

@@ -4,7 +4,7 @@
 -- source include/have_binlog_format_statement.inc
 
 disable_query_log;
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 enable_query_log;
 
 -- disable_query_log

mysql-test/suite/binlog/t/binlog_stm_row.test

@@ -2,7 +2,7 @@
 # Test sets its own binlog_format, so we restrict it to run only once
 --source include/have_binlog_format_row.inc
 
-CALL mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+CALL mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 
 # Get rid of previous tests binlog
 --disable_query_log

mysql-test/suite/binlog/t/binlog_stm_unsafe_warning.test

@@ -25,9 +25,7 @@
 
 -- source include/have_log_bin.inc
 -- source include/have_binlog_format_statement.inc
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statement uses a LIMIT clause. This is unsafe because the set of rows included cannot be predicted. .*");
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statement uses a system function whose value may differ on slave. .*");
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statement invokes a trigger or a stored function that inserts into AUTO_INCREMENT column");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT.");
 
 -- echo ### NOT filtered database => assertion: warnings ARE shown
 

mysql-test/suite/binlog/t/binlog_tmp_table.test

@@ -31,7 +31,7 @@ source include/have_binlog_format_mixed_or_statement.inc;
 RESET MASTER;
 
 --disable_query_log
-CALL mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+CALL mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 --enable_query_log
 
 connect (master,127.0.0.1,root,,test,$MASTER_MYPORT,);

mysql-test/suite/binlog/t/binlog_unsafe.test

@@ -78,7 +78,7 @@
 # BUG#45825: INSERT DELAYED is not unsafe: logged in statement format
 # BUG#45785: LIMIT in SP does not cause RBL if binlog_format=MIXED
 # BUG#47995: Mark user functions as unsafe
-# BUG#49222: Mare RAND() unsafe
+# BUG#49222: Mark RAND() unsafe
 #
 # ==== Related test cases ====
 #
@@ -90,15 +90,15 @@
 # actually can be replicated safely in statement mode.
 #
 # rpl_ndb.rpl_ndb_binlog_format_errors tests all errors and warnings
-# related to logging format (not just 'Unsafe statement binlogged in
-# statement mode since BINLOG_FORMAT = STATEMENT').
+# related to logging format (not just 'Unsafe statement written to the
+# binary log using statement format since BINLOG_FORMAT = STATEMENT').
 
 --source include/have_udf.inc
 --source include/have_log_bin.inc
 --source include/have_binlog_format_statement.inc
 
 --disable_query_log
-call mtr.add_suppression("Unsafe statement binlogged in statement format");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 --enable_query_log
 
 --echo #### Setup tables ####

mysql-test/suite/ndb/r/ndb_binlog_format.result

-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 drop table if exists t1, t2, t3;
 CREATE TABLE t1 (m INT, n INT) ENGINE=MYISAM;
 CREATE TABLE t2 (b INT, c INT) ENGINE=BLACKHOLE;
@@ -9,12 +9,12 @@ INSERT INTO t1 VALUES (1,1), (1,2), (2,1), (2,2);
 INSERT INTO t2 VALUES (1,1), (1,2), (2,1), (2,2);
 UPDATE t1, t2 SET m = 2, b = 3 WHERE n = c;
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statements that read from both transactional (or a temporary table of any engine type) and non-transactional tables and write to any of them are unsafe.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statements that read from both transactional (or a temporary table of any engine type) and non-transactional tables and write to any of them are unsafe.
 START TRANSACTION;
 INSERT INTO t3 VALUES (1,1), (1,2), (2,1), (2,2);
 UPDATE t1, t3 SET m = 2, e = 3 WHERE n = f;
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statements that read from both transactional (or a temporary table of any engine type) and non-transactional tables and write to any of them are unsafe.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statements that read from both transactional (or a temporary table of any engine type) and non-transactional tables and write to any of them are unsafe.
 UPDATE t3, t2 SET e = 2, b = 3 WHERE f = c;
 COMMIT;
 show binlog events from <binlog_start>;

mysql-test/suite/ndb/t/ndb_binlog_format.test

@@ -6,7 +6,7 @@
 -- source include/have_ndb.inc
 -- source include/have_log_bin.inc
 
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 
 --disable_warnings
 drop table if exists t1, t2, t3;

mysql-test/suite/perfschema/r/binlog_stmt.result

 set binlog_format=statement;
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 RESET MASTER;
 select count(*) > 0 from performance_schema.SETUP_INSTRUMENTS;
 count(*) > 0
@@ -7,7 +7,7 @@ count(*) > 0
 update performance_schema.SETUP_INSTRUMENTS set enabled='NO'
   where name like "wait/synch/rwlock/%";
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statement uses the general_log, slow_log or performance_schema table(s). This is unsafe because system tables may differ on slave.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. The statement is unsafe because it uses the general log, slow query log, or performance_schema table(s). This is unsafe because system tables may differ on slaves.
 select count(*) > 0 from performance_schema.EVENTS_WAITS_CURRENT;
 count(*) > 0
 1
@@ -18,18 +18,18 @@ create table test.t2 (name varchar(128));
 insert into test.t1
 select thread_id from performance_schema.EVENTS_WAITS_CURRENT;
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statement uses the general_log, slow_log or performance_schema table(s). This is unsafe because system tables may differ on slave.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. The statement is unsafe because it uses the general log, slow query log, or performance_schema table(s). This is unsafe because system tables may differ on slaves.
 insert into test.t2
 select name from performance_schema.SETUP_INSTRUMENTS
 where name like "wait/synch/rwlock/%";
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statement uses the general_log, slow_log or performance_schema table(s). This is unsafe because system tables may differ on slave.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. The statement is unsafe because it uses the general log, slow query log, or performance_schema table(s). This is unsafe because system tables may differ on slaves.
 drop table test.t1;
 drop table test.t2;
 update performance_schema.SETUP_INSTRUMENTS set enabled='YES'
   where name like "wait/synch/rwlock/%";
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statement uses the general_log, slow_log or performance_schema table(s). This is unsafe because system tables may differ on slave.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. The statement is unsafe because it uses the general log, slow query log, or performance_schema table(s). This is unsafe because system tables may differ on slaves.
 show binlog events from <binlog_start>;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	BEGIN

mysql-test/suite/perfschema/t/binlog_stmt.test

@@ -20,7 +20,7 @@
 --source include/have_perfschema.inc
 
 set binlog_format=statement;
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 
 --source ../include/binlog_common.inc
 

mysql-test/suite/rpl/r/rpl_begin_commit_rollback.result

@@ -4,8 +4,8 @@ reset master;
 reset slave;
 drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 SET @@session.binlog_direct_non_transactional_updates= FALSE;
 DROP DATABASE IF EXISTS db1;
 CREATE DATABASE db1;
@@ -71,7 +71,7 @@ INSERT INTO db1.t2 VALUES ('before call db1.p2()');
 BEGIN;
 CALL db1.p2();
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Non-transactional reads or writes are unsafe if they occur after transactional reads or writes inside a transaction.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 ROLLBACK;
 INSERT INTO db1.t2 VALUES ('after call db1.p2()');
 SELECT * FROM db1.t1;

mysql-test/suite/rpl/r/rpl_blackhole.result

@@ -4,7 +4,7 @@ reset master;
 reset slave;
 drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 CREATE TABLE t1 (a INT, b INT, c INT);
 CREATE TABLE t2 (a INT, b INT, c INT);
 ALTER TABLE t1 ENGINE=BLACKHOLE;

mysql-test/suite/rpl/r/rpl_concurrency_error.result

@@ -4,7 +4,7 @@ reset master;
 reset slave;
 drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 ########################################################################
 #                             Environment
 ########################################################################
@@ -22,7 +22,7 @@ SET AUTOCOMMIT = 1;
 BEGIN;
 UPDATE t SET f = 'yellow 2' WHERE i = 3;
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statements that read from both transactional (or a temporary table of any engine type) and non-transactional tables and write to any of them are unsafe.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statements that read from both transactional (or a temporary table of any engine type) and non-transactional tables and write to any of them are unsafe.
 SET AUTOCOMMIT = 1;
 BEGIN;
 UPDATE t SET f = 'magenta 2' WHERE f = 'red';
@@ -30,7 +30,7 @@ ERROR HY000: Lock wait timeout exceeded; try restarting transaction
 INSERT INTO t VALUES (5 + (2 * 10),"brown");
 INSERT INTO n VALUES (now(),"brown");
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Non-transactional reads or writes are unsafe if they occur after transactional reads or writes inside a transaction.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 COMMIT;
 ROLLBACK;
 Warnings:
@@ -51,7 +51,7 @@ SET AUTOCOMMIT = 1;
 BEGIN;
 UPDATE t SET f = 'gray 2' WHERE i = 3;
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statements that read from both transactional (or a temporary table of any engine type) and non-transactional tables and write to any of them are unsafe.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statements that read from both transactional (or a temporary table of any engine type) and non-transactional tables and write to any of them are unsafe.
 SET AUTOCOMMIT = 1;
 BEGIN;
 UPDATE t SET f = 'dark blue 2' WHERE f = 'red';
@@ -59,7 +59,7 @@ ERROR HY000: Lock wait timeout exceeded; try restarting transaction
 INSERT INTO t VALUES (6 + (2 * 10),"brown");
 INSERT INTO n VALUES (now(),"brown");
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Non-transactional reads or writes are unsafe if they occur after transactional reads or writes inside a transaction.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 COMMIT;
 COMMIT;
 show binlog events from <binlog_start>;
@@ -77,14 +77,14 @@ master-bin.000001	#	Xid	#	#	COMMIT /* XID */
 SET AUTOCOMMIT = 0;
 UPDATE t SET f = 'yellow 1' WHERE i = 3;
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statements that read from both transactional (or a temporary table of any engine type) and non-transactional tables and write to any of them are unsafe.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statements that read from both transactional (or a temporary table of any engine type) and non-transactional tables and write to any of them are unsafe.
 SET AUTOCOMMIT = 0;
 UPDATE t SET f = 'magenta 1' WHERE f = 'red';
 ERROR HY000: Lock wait timeout exceeded; try restarting transaction
 INSERT INTO t VALUES (5 + (1 * 10),"brown");
 INSERT INTO n VALUES (now(),"brown");
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Non-transactional reads or writes are unsafe if they occur after transactional reads or writes inside a transaction.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 COMMIT;
 ROLLBACK;
 Warnings:
@@ -104,14 +104,14 @@ master-bin.000001	#	Query	#	#	ROLLBACK
 SET AUTOCOMMIT = 0;
 UPDATE t SET f = 'gray 1' WHERE i = 3;
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statements that read from both transactional (or a temporary table of any engine type) and non-transactional tables and write to any of them are unsafe.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statements that read from both transactional (or a temporary table of any engine type) and non-transactional tables and write to any of them are unsafe.
 SET AUTOCOMMIT = 0;
 UPDATE t SET f = 'dark blue 1' WHERE f = 'red';
 ERROR HY000: Lock wait timeout exceeded; try restarting transaction
 INSERT INTO t VALUES (6 + (1 * 10),"brown");
 INSERT INTO n VALUES (now(),"brown");
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Non-transactional reads or writes are unsafe if they occur after transactional reads or writes inside a transaction.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 COMMIT;
 COMMIT;
 show binlog events from <binlog_start>;

mysql-test/suite/rpl/r/rpl_get_lock.result

@@ -4,7 +4,7 @@ reset master;
 reset slave;
 drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
-CALL mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+CALL mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 create table t1(n int);
 insert into t1 values(get_lock("lock",2));
 select get_lock("lock",2);

mysql-test/suite/rpl/r/rpl_insert_id.result

-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 #
 # Setup
 #
@@ -534,4 +534,4 @@ drop table t1, t2;
 drop procedure foo;
 SET @@global.concurrent_insert= @old_concurrent_insert;
 set @@session.sql_auto_is_null=default;
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");

mysql-test/suite/rpl/r/rpl_insert_ignore.result

@@ -4,7 +4,7 @@ reset master;
 reset slave;
 drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 CREATE TABLE t1 (
 a int unsigned not null auto_increment primary key,
 b int unsigned,

mysql-test/suite/rpl/r/rpl_misc_functions.result

@@ -4,7 +4,7 @@ reset master;
 reset slave;
 drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
-CALL mtr.add_suppression('Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT');
+CALL mtr.add_suppression('Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT');
 create table t1(id int, i int, r1 int, r2 int, p varchar(100));
 insert into t1 values(1, connection_id(), 0, 0, "");
 insert into t1 values(2, 0, rand()*1000, rand()*1000, "");

mysql-test/suite/rpl/r/rpl_mixed_binlog_max_cache_size.result

@@ -4,7 +4,7 @@ reset master;
 reset slave;
 drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 CREATE TABLE t1(a INT PRIMARY KEY, data VARCHAR(30000)) ENGINE=Innodb;
 CREATE TABLE t2(a INT PRIMARY KEY, data VARCHAR(30000)) ENGINE=MyIsam;
 CREATE TABLE t3(a INT PRIMARY KEY, data VARCHAR(30000)) ENGINE=Innodb;

mysql-test/suite/rpl/r/rpl_mixed_mixing_engines.result

@@ -7,7 +7,7 @@ start slave;
 #########################################################################
 #                            CONFIGURATION
 #########################################################################
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 SET @commands= 'configure';
 SET SQL_LOG_BIN=0;
 CREATE TABLE nt_1 (trans_id INT, stmt_id INT, info VARCHAR(64), PRIMARY KEY(trans_id, stmt_id)) ENGINE = MyISAM;

mysql-test/suite/rpl/r/rpl_mysql_upgrade.result

@@ -4,7 +4,7 @@ reset master;
 reset slave;
 drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 DROP DATABASE IF EXISTS `#mysql50#mysqltest-1`;
 CREATE DATABASE `#mysql50#mysqltest-1`;
 Master position is not changed

mysql-test/suite/rpl/r/rpl_non_direct_mixed_mixing_engines.result

@@ -7,7 +7,7 @@ start slave;
 #########################################################################
 #                            CONFIGURATION
 #########################################################################
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 SET @commands= 'configure';
 SET SQL_LOG_BIN=0;
 CREATE TABLE nt_1 (trans_id INT, stmt_id INT, info VARCHAR(64), PRIMARY KEY(trans_id, stmt_id)) ENGINE = MyISAM;

mysql-test/suite/rpl/r/rpl_non_direct_row_mixing_engines.result

@@ -7,7 +7,7 @@ start slave;
 #########################################################################
 #                            CONFIGURATION
 #########################################################################
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 SET @commands= 'configure';
 SET SQL_LOG_BIN=0;
 CREATE TABLE nt_1 (trans_id INT, stmt_id INT, info VARCHAR(64), PRIMARY KEY(trans_id, stmt_id)) ENGINE = MyISAM;

mysql-test/suite/rpl/r/rpl_nondeterministic_functions.result

@@ -4,7 +4,7 @@ reset master;
 reset slave;
 drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
-CALL mtr.add_suppression('Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT');
+CALL mtr.add_suppression('Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT');
 CREATE TABLE t1 (a VARCHAR(1000));
 INSERT INTO t1 VALUES (CONNECTION_ID());
 INSERT INTO t1 VALUES (CONNECTION_ID());

mysql-test/suite/rpl/r/rpl_read_only.result

@@ -4,7 +4,7 @@ reset master;
 reset slave;
 drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log in statement format since BINLOG_FORMAT = STATEMENT");
 create user test;
 create table t1(a int) engine=InnoDB;
 create table t2(a int) engine=MyISAM;

mysql-test/suite/rpl/r/rpl_row_binlog_max_cache_size.result

@@ -4,7 +4,7 @@ reset master;
 reset slave;
 drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 CREATE TABLE t1(a INT PRIMARY KEY, data VARCHAR(30000)) ENGINE=Innodb;
 CREATE TABLE t2(a INT PRIMARY KEY, data VARCHAR(30000)) ENGINE=MyIsam;
 CREATE TABLE t3(a INT PRIMARY KEY, data VARCHAR(30000)) ENGINE=Innodb;

mysql-test/suite/rpl/r/rpl_row_inexist_tbl.result

@@ -14,7 +14,7 @@ DROP TABLE t1;
 INSERT INTO t1 VALUES (1);
 ==== Verify error on slave ====
 [on slave]
-Last_SQL_Error = Error 'Table 'test.t1' doesn't exist' on opening tables
+Last_SQL_Error = Error executing row event: 'Table 'test.t1' doesn't exist'
 ==== Clean up ====
 include/stop_slave.inc
 [on master]

mysql-test/suite/rpl/r/rpl_row_mixing_engines.result

@@ -7,7 +7,7 @@ start slave;
 #########################################################################
 #                            CONFIGURATION
 #########################################################################
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 SET @commands= 'configure';
 SET SQL_LOG_BIN=0;
 CREATE TABLE nt_1 (trans_id INT, stmt_id INT, info VARCHAR(64), PRIMARY KEY(trans_id, stmt_id)) ENGINE = MyISAM;

mysql-test/suite/rpl/r/rpl_slow_query_log.result

@@ -4,7 +4,7 @@ reset master;
 reset slave;
 drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
-CALL mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+CALL mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 include/stop_slave.inc
 SET @old_log_output= @@log_output;
 SET GLOBAL log_output= 'TABLE';

mysql-test/suite/rpl/r/rpl_sp.result

@@ -1244,7 +1244,7 @@ start slave;
 create table t1 (c1 int);
 insert into t1 (c1) values
 (1), (2), (3), (4), (5), (6), (7), (8), (9), (10);
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 create procedure p1(p1 integer)
 delete from t1 limit p1;
 set @save_binlog_format=@@session.binlog_format;

mysql-test/suite/rpl/r/rpl_stm_000001.result

@@ -4,7 +4,7 @@ reset master;
 reset slave;
 drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
-CALL mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+CALL mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 create table t1 (word char(20) not null);
 load data infile '../../std_data/words.dat' into table t1;
 load data local infile 'MYSQL_TEST_DIR/std_data/words.dat' into table t1;

mysql-test/suite/rpl/r/rpl_stm_auto_increment_bug33029.result

@@ -4,12 +4,8 @@ reset master;
 reset slave;
 drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
-CALL mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
-DROP TABLE IF EXISTS t1, t2;
-DROP PROCEDURE IF EXISTS p1;
-DROP PROCEDURE IF EXISTS p2;
-DROP TRIGGER IF EXISTS tr1;
-DROP FUNCTION IF EXISTS f1;
+CALL mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
+CALL mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 CREATE TABLE t1 (id INT AUTO_INCREMENT PRIMARY KEY);
 CREATE TABLE t2 (id INT AUTO_INCREMENT PRIMARY KEY);
 CREATE PROCEDURE p1()
@@ -206,4 +202,3 @@ DROP PROCEDURE IF EXISTS p1;
 DROP PROCEDURE IF EXISTS p2;
 DROP FUNCTION IF EXISTS f1;
 DROP TRIGGER IF EXISTS tr1;
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");

mysql-test/suite/rpl/r/rpl_stm_binlog_max_cache_size.result

@@ -4,7 +4,7 @@ reset master;
 reset slave;
 drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 CREATE TABLE t1(a INT PRIMARY KEY, data VARCHAR(30000)) ENGINE=Innodb;
 CREATE TABLE t2(a INT PRIMARY KEY, data VARCHAR(30000)) ENGINE=MyIsam;
 CREATE TABLE t3(a INT PRIMARY KEY, data VARCHAR(30000)) ENGINE=Innodb;
@@ -33,17 +33,17 @@ Got one of the listed errors
 Got one of the listed errors
 Got one of the listed errors
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Non-transactional reads or writes are unsafe if they occur after transactional reads or writes inside a transaction.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 BEGIN;
 Got one of the listed errors
 Got one of the listed errors
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Non-transactional reads or writes are unsafe if they occur after transactional reads or writes inside a transaction.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 BEGIN;
 Got one of the listed errors
 Got one of the listed errors
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Non-transactional reads or writes are unsafe if they occur after transactional reads or writes inside a transaction.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 source include/diff_master_slave.inc;
 ########################################################################################
 #                                     3 - BEGIN - COMMIT
@@ -56,7 +56,7 @@ Got one of the listed errors
 Got one of the listed errors
 Got one of the listed errors
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Non-transactional reads or writes are unsafe if they occur after transactional reads or writes inside a transaction.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 COMMIT;
 source include/diff_master_slave.inc;
 ########################################################################################
@@ -70,7 +70,7 @@ Got one of the listed errors
 Got one of the listed errors
 Got one of the listed errors
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Non-transactional reads or writes are unsafe if they occur after transactional reads or writes inside a transaction.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 ROLLBACK;
 Warnings:
 Warning	1196	Some non-transactional changed tables couldn't be rolled back
@@ -110,7 +110,7 @@ Got one of the listed errors
 Got one of the listed errors
 Got one of the listed errors
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Non-transactional reads or writes are unsafe if they occur after transactional reads or writes inside a transaction.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 ROLLBACK TO sv;
 Warnings:
 Warning	1196	Some non-transactional changed tables couldn't be rolled back
@@ -124,18 +124,18 @@ TRUNCATE TABLE t2;
 TRUNCATE TABLE t3;
 BEGIN;
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Non-transactional reads or writes are unsafe if they occur after transactional reads or writes inside a transaction.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Got one of the listed errors
 Got one of the listed errors
 Got one of the listed errors
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Non-transactional reads or writes are unsafe if they occur after transactional reads or writes inside a transaction.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Non-transactional reads or writes are unsafe if they occur after transactional reads or writes inside a transaction.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 COMMIT;
 BEGIN;
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Non-transactional reads or writes are unsafe if they occur after transactional reads or writes inside a transaction.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 Got one of the listed errors
 COMMIT;
 source include/diff_master_slave.inc;

mysql-test/suite/rpl/r/rpl_stm_loadfile.result

@@ -10,7 +10,7 @@ CREATE TABLE test.t1 (a INT, blob_column LONGBLOB, PRIMARY KEY(a));
 INSERT INTO test.t1  VALUES(1,'test');
 UPDATE test.t1 SET blob_column=LOAD_FILE('../../std_data/words2.dat') WHERE a=1;
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statement uses a system function whose value may differ on slave.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it uses a system function that may return a different value on the slave.
 create procedure test.p1()
 begin
 INSERT INTO test.t1  VALUES(2,'test');
@@ -18,7 +18,7 @@ UPDATE test.t1 SET blob_column=LOAD_FILE('../../std_data/words2.dat') WHERE a=2;
 end|
 CALL test.p1();
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statement uses a system function whose value may differ on slave.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it uses a system function that may return a different value on the slave.
 SELECT * FROM test.t1 ORDER BY blob_column;
 a	blob_column
 1	abase

mysql-test/suite/rpl/r/rpl_stm_start_stop_slave.result

@@ -5,8 +5,8 @@ reset slave;
 drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
 SET @@session.binlog_direct_non_transactional_updates= FALSE;
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 create table t1(n int);
 stop slave;
 start slave;
@@ -26,7 +26,7 @@ begin;
 insert into t1i values (4);
 insert into t2m values (1);
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Non-transactional reads or writes are unsafe if they occur after transactional reads or writes inside a transaction.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 insert into t1i values (5);
 commit;
 zero

mysql-test/suite/rpl/r/rpl_stm_stop_middle_group.result

@@ -5,7 +5,7 @@ reset slave;
 drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
 SET @@session.binlog_direct_non_transactional_updates= FALSE;
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 create table tm (a int auto_increment primary key) engine=myisam;
 create table ti (a int auto_increment primary key) engine=innodb;
 set @@global.debug="+d,stop_slave_middle_group";
@@ -13,7 +13,7 @@ begin;
 insert into ti set a=null;
 insert into tm set a=null;
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Non-transactional reads or writes are unsafe if they occur after transactional reads or writes inside a transaction.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 commit;
 SELECT "NO" AS Last_SQL_Error, @check as `true`;
 Last_SQL_Error	true
@@ -34,7 +34,7 @@ begin;
 insert into ti set a=null;
 insert into tm set a=null;
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Non-transactional reads or writes are unsafe if they occur after transactional reads or writes inside a transaction.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 commit;
 SELECT "Fatal error: ... The slave SQL is stopped, leaving the current group of events unfinished with a non-transaction table changed. If the group consists solely of Row-based events, you can try restarting the slave with --slave-exec-mode=IDEMPOTENT, which ignores duplicate key, key not found, and similar errors (see documentation for details)." AS Last_SQL_Error, @check as `true`;
 Last_SQL_Error	true
@@ -53,7 +53,7 @@ set @@global.debug="+d,stop_slave_middle_group";
 set @@global.debug="+d,incomplete_group_in_relay_log";
 update tm as t1, ti as t2 set t1.a=t1.a * 2, t2.a=t2.a * 2;
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statements that read from both transactional (or a temporary table of any engine type) and non-transactional tables and write to any of them are unsafe.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statements that read from both transactional (or a temporary table of any engine type) and non-transactional tables and write to any of them are unsafe.
 SELECT "Fatal error: ... The slave SQL is stopped, leaving the current group of events unfinished with a non-transaction table changed. If the group consists solely of Row-based events, you can try restarting the slave with --slave-exec-mode=IDEMPOTENT, which ignores duplicate key, key not found, and similar errors (see documentation for details)." AS Last_SQL_Error, @check as `true`;
 Last_SQL_Error	true
 Fatal error: ... The slave SQL is stopped, leaving the current group of events unfinished with a non-transaction table changed. If the group consists solely of Row-based events, you can try restarting the slave with --slave-exec-mode=IDEMPOTENT, which ignores duplicate key, key not found, and similar errors (see documentation for details).	1

mysql-test/suite/rpl/r/rpl_temp_temporary.result

@@ -4,7 +4,7 @@ reset master;
 reset slave;
 drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
-CALL mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+CALL mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 ########################################################################
 #                         VERIFY ITEMS 1 and 2
 ########################################################################
@@ -24,7 +24,7 @@ INSERT INTO t_innodb_temp VALUES(1);
 BEGIN;
 INSERT INTO t_myisam SELECT * FROM t_myisam_temp;
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statements that read from both transactional (or a temporary table of any engine type) and non-transactional tables and write to any of them are unsafe.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statements that read from both transactional (or a temporary table of any engine type) and non-transactional tables and write to any of them are unsafe.
 INSERT INTO t_innodb SELECT * FROM t_myisam_temp;
 INSERT INTO t_innodb SELECT * FROM t_innodb_temp;
 ROLLBACK;
@@ -33,7 +33,7 @@ Warning	1196	Some non-transactional changed tables couldn't be rolled back
 BEGIN;
 INSERT INTO t_myisam SELECT * FROM t_innodb_temp;
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Statements that read from both transactional (or a temporary table of any engine type) and non-transactional tables and write to any of them are unsafe.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statements that read from both transactional (or a temporary table of any engine type) and non-transactional tables and write to any of them are unsafe.
 INSERT INTO t_innodb SELECT * FROM t_myisam_temp;
 INSERT INTO t_innodb SELECT * FROM t_innodb_temp;
 ROLLBACK;
@@ -186,11 +186,11 @@ INSERT INTO t_myisam VALUES(CONNECTION_ID());
 INSERT INTO tmp1 VALUES(1);
 INSERT INTO t_myisam VALUES(1);
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Non-transactional reads or writes are unsafe if they occur after transactional reads or writes inside a transaction.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 INSERT INTO t_innodb VALUES(1);
 INSERT INTO t_myisam VALUES(CONNECTION_ID());
 Warnings:
-Note	1592	Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT. Reason for unsafeness: Non-transactional reads or writes are unsafe if they occur after transactional reads or writes inside a transaction.
+Note	1592	Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT. Statement is unsafe because it accesses a non-transactional table after accessing a transactional table within the same transaction.
 INSERT INTO t_innodb VALUES(1);
 COMMIT;
 DROP TABLE t_myisam;

mysql-test/suite/rpl/r/rpl_variables_stm.result

@@ -4,7 +4,7 @@ reset master;
 reset slave;
 drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 ==== Initialization ====
 [on master]
 SET @m_auto_increment_increment= @@global.auto_increment_increment;

mysql-test/suite/rpl/t/rpl000013.test

@@ -13,7 +13,7 @@ sync_slave_with_master;
 connection master;
 
 --disable_query_log
-CALL mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+CALL mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 --enable_query_log
 
 create table t2(n int);

mysql-test/suite/rpl/t/rpl_begin_commit_rollback.test

@@ -3,10 +3,10 @@ source include/have_innodb.inc;
 source include/have_binlog_format_statement.inc;
 
 connection slave;
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 
 connection master;
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 
 SET @@session.binlog_direct_non_transactional_updates= FALSE;
 

mysql-test/suite/rpl/t/rpl_blackhole.test

@@ -18,7 +18,7 @@
 source include/master-slave.inc;
 source include/have_blackhole.inc;
 
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 
 # We start with no primary key
 CREATE TABLE t1 (a INT, b INT, c INT);

mysql-test/suite/rpl/t/rpl_concurrency_error.test

@@ -21,7 +21,7 @@
 --source include/have_innodb.inc
 --source include/have_binlog_format_statement.inc
 
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 
 --echo ########################################################################
 --echo #                             Environment

mysql-test/suite/rpl/t/rpl_err_ignoredtable.test

@@ -8,7 +8,7 @@
 -- source include/master-slave.inc
 
 -- disable_query_log
-CALL mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT.");
+CALL mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT.");
 -- enable_query_log
 
 connection master;

mysql-test/suite/rpl/t/rpl_get_lock.test

 source include/master-slave.inc;
 
-CALL mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+CALL mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 
 create table t1(n int);
 # Use of get_lock gives a warning for unsafeness if binlog_format=statement

mysql-test/suite/rpl/t/rpl_insert.test

@@ -7,7 +7,7 @@
 --source include/not_windows.inc
 
 disable_query_log;
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 enable_query_log;
 
 --disable_warnings

mysql-test/suite/rpl/t/rpl_insert_id.test

@@ -9,4 +9,4 @@
 -- source include/have_innodb.inc
 let $engine_type=myisam;
 -- source extra/rpl_tests/rpl_insert_id.test
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");

mysql-test/suite/rpl/t/rpl_insert_ignore.test

@@ -5,7 +5,7 @@
 -- source include/have_innodb.inc
 -- source include/master-slave.inc
 
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 
 let $engine_type=innodb;
 let $engine_type2=myisam;

mysql-test/suite/rpl/t/rpl_invoked_features.test

@@ -9,7 +9,7 @@
 --source include/have_innodb.inc
 
 disable_query_log;
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 enable_query_log;
 
 # --disable_warnings/--enable_warnings added before/after query 

mysql-test/suite/rpl/t/rpl_misc_functions.test

@@ -3,7 +3,7 @@
 #
 source include/master-slave.inc;
 
-CALL mtr.add_suppression('Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT');
+CALL mtr.add_suppression('Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT');
 
 create table t1(id int, i int, r1 int, r2 int, p varchar(100));
 insert into t1 values(1, connection_id(), 0, 0, "");

mysql-test/suite/rpl/t/rpl_mixed_bit_pk.test

@@ -31,7 +31,7 @@
 --source include/master-slave.inc
 
 disable_query_log;
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 enable_query_log;
 
 --disable_warnings

mysql-test/suite/rpl/t/rpl_mysql_upgrade.test

@@ -10,7 +10,7 @@
 # Only run test if "mysql_upgrade" is found
 --source include/have_mysql_upgrade.inc
 
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 
 connection master;
 --disable_warnings

mysql-test/suite/rpl/t/rpl_nondeterministic_functions.test

@@ -17,7 +17,7 @@
 
 --source include/master-slave.inc
 
-CALL mtr.add_suppression('Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT');
+CALL mtr.add_suppression('Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT');
 
 CREATE TABLE t1 (a VARCHAR(1000));
 

mysql-test/suite/rpl/t/rpl_optimize.test

@@ -14,8 +14,7 @@
 -- source include/master-slave.inc
 
 disable_query_log;
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
-CALL mtr.add_suppression('Statement may not be safe to log in statement format.');
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 enable_query_log;
 
 create table t1 (a int not null auto_increment primary key, b int, key(b));

mysql-test/suite/rpl/t/rpl_read_only.test

@@ -2,7 +2,7 @@
 -- source include/master-slave.inc
 -- source include/have_innodb.inc
 
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 
 # Create a test and replicate it to slave
 connection master;

mysql-test/suite/rpl/t/rpl_semi_sync.test

@@ -11,11 +11,10 @@ disable_query_log;
 connection master;
 call mtr.add_suppression("Timeout waiting for reply of binlog");
 call mtr.add_suppression("Read semi-sync reply");
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT.");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT.");
 connection slave;
 call mtr.add_suppression("Master server does not support semi-sync");
 call mtr.add_suppression("Semi-sync slave .* reply");
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT.");
 enable_query_log;
 connection master;
 

mysql-test/suite/rpl/t/rpl_semi_sync_event.test

@@ -11,7 +11,7 @@ connection master;
 call mtr.add_suppression("Timeout waiting for reply of binlog");
 call mtr.add_suppression("Semi-sync master .* waiting for slave reply");
 call mtr.add_suppression("Read semi-sync reply");
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT.");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT.");
 connection slave;
 call mtr.add_suppression("Master server does not support semi-sync");
 call mtr.add_suppression("Semi-sync slave .* reply");

mysql-test/suite/rpl/t/rpl_session_var.test

@@ -4,7 +4,7 @@
 source include/master-slave.inc;
 
 disable_query_log;
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 enable_query_log;
 
 drop table if exists t1;

mysql-test/suite/rpl/t/rpl_slow_query_log.test

@@ -28,7 +28,7 @@
 source include/master-slave.inc;
 source include/have_binlog_format_statement.inc;
 
-CALL mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+CALL mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 
 
 # Prepare slave for different long_query_time we need to stop the slave 

mysql-test/suite/rpl/t/rpl_sp.test

@@ -694,7 +694,7 @@ create table t1 (c1 int);
 insert into t1 (c1) values
 (1), (2), (3), (4), (5), (6), (7), (8), (9), (10);
 
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 
 create procedure p1(p1 integer)
   delete from t1 limit p1; 

mysql-test/suite/rpl/t/rpl_stm_auto_increment_bug33029.test

@@ -11,15 +11,10 @@
 source include/have_binlog_format_statement.inc;
 source include/master-slave.inc;
 
-CALL mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
-
---disable_warnings
-DROP TABLE IF EXISTS t1, t2;
-DROP PROCEDURE IF EXISTS p1;
-DROP PROCEDURE IF EXISTS p2;
-DROP TRIGGER IF EXISTS tr1;
-DROP FUNCTION IF EXISTS f1;
---enable_warnings
+CALL mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
+--connection slave
+CALL mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
+--connection master
 
 CREATE TABLE t1 (id INT AUTO_INCREMENT PRIMARY KEY);
 CREATE TABLE t2 (id INT AUTO_INCREMENT PRIMARY KEY);
@@ -110,5 +105,3 @@ DROP FUNCTION IF EXISTS f1;
 DROP TRIGGER IF EXISTS tr1;
 enable_warnings;
 sync_slave_with_master;
-
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");

mysql-test/suite/rpl/t/rpl_stm_found_rows.test

@@ -2,7 +2,7 @@ source include/have_binlog_format_statement.inc;
 source include/master-slave.inc;
 
 disable_query_log;
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 enable_query_log;
 
 # It is not possible to replicate FOUND_ROWS() using statement-based

mysql-test/suite/rpl/t/rpl_stm_insert_delayed.test

@@ -3,6 +3,6 @@
 --source include/not_embedded.inc
 --source include/not_windows.inc
 disable_query_log;
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 enable_query_log;
 --source extra/rpl_tests/rpl_insert_delayed.test

mysql-test/suite/rpl/t/rpl_stm_loadfile.test

@@ -17,7 +17,7 @@
 -- source include/have_binlog_format_statement.inc
 
 disable_query_log;
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 enable_query_log;
 
 -- source extra/rpl_tests/rpl_loadfile.test

mysql-test/suite/rpl/t/rpl_temp_table.test

@@ -5,7 +5,7 @@
 -- source include/master-slave.inc
 
 --disable_query_log
-CALL mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+CALL mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 --enable_query_log
 
 create table t2 (n int, PRIMARY KEY(n));

mysql-test/suite/rpl/t/rpl_temp_temporary.test

@@ -44,7 +44,7 @@ source include/master-slave.inc;
 source include/have_binlog_format_statement.inc;
 source include/have_innodb.inc;
 
-CALL mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+CALL mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 
 --echo ########################################################################
 --echo #                         VERIFY ITEMS 1 and 2

mysql-test/suite/rpl/t/rpl_temporary.test

@@ -52,7 +52,7 @@ reset master;
 connection master;
 
 --disable_query_log
-CALL mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+CALL mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 --enable_query_log
 
 disable_warnings;

mysql-test/suite/rpl/t/rpl_timezone.test

@@ -14,7 +14,7 @@
 # and possibly Konstantin).
 
 --disable_query_log
-CALL mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+CALL mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 --enable_query_log
 
 --disable_ps_protocol

mysql-test/suite/rpl/t/rpl_trigger.test

@@ -6,7 +6,7 @@
 --source include/master-slave.inc
 
 disable_query_log;
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 enable_query_log;
 
 --disable_warnings

mysql-test/suite/rpl/t/rpl_udf.test

@@ -8,7 +8,7 @@
 --source include/master-slave.inc
 
 disable_query_log;
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 enable_query_log;
 
 let $engine_type= MyISAM;

mysql-test/suite/rpl/t/rpl_user_variables.test

@@ -7,7 +7,7 @@
 -- source include/master-slave.inc
 
 disable_query_log;
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 enable_query_log;
 
 # Disable PS as the log positions differs

mysql-test/suite/rpl/t/rpl_variables_stm.test

@@ -55,7 +55,7 @@
 source include/master-slave.inc;
 source include/have_binlog_format_mixed_or_statement.inc;
 
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 
 --echo ==== Initialization ====
 

mysql-test/suite/rpl/t/rpl_view_multi.test

@@ -16,7 +16,7 @@
 # Suppress "unsafe" warnings. 
 #
 disable_query_log;
-call mtr.add_suppression("Unsafe statement binlogged in statement format since BINLOG_FORMAT = STATEMENT");
+call mtr.add_suppression("Unsafe statement written to the binary log using statement format since BINLOG_FORMAT = STATEMENT");
 enable_query_log;