Merge from main.

mysql-test/extra/binlog_tests/binlog_insert_delayed.test

-# Test of binlogging of INSERT_ID with INSERT DELAYED
+# ==== Purpose ====
+#
+# Verify that INSERT DELAYED in mixed or row mode writes events to the
+# binlog, and that AUTO_INCREMENT works correctly.
+#
+# ==== Method ====
+#
+# Insert both single and multiple rows into an autoincrement column,
+# both with specified value and with NULL.
+#
+# With INSERT DELAYED, the rows do not show up in the table
+# immediately, so we must do source include/wait_until_rows_count.inc
+# between any two INSERT DELAYED statements.  Moreover, if mixed or
+# row-based logging is used, there is also a delay between when rows
+# show up in the table and when they show up in the binlog.  To ensure
+# that the rows show up in the binlog, we call FLUSH TABLES, which
+# waits until the delayed_insert thread has finished.
+#
+# We cannot read the binlog after executing INSERT DELAYED statements
+# that insert multiple rows, because that is nondeterministic. More
+# precisely, rows may be written in batches to the binlog, where each
+# batch has one Table_map_log_event and one or more
+# Write_rows_log_event. The number of rows included in each batch is
+# nondeterministic.
+#
+# ==== Related bugs ====
+#
+# BUG#20627: INSERT DELAYED does not honour auto_increment_* variables
+# Bug in this test: BUG#38068: binlog_stm_binlog fails sporadically in pushbuild
+
+
 create table t1 (a int not null auto_increment, primary key (a)) engine=myisam;
-# First, avoid BUG#20627:
-set @@session.auto_increment_increment=1, @@session.auto_increment_offset=1;
-# Verify that only one INSERT_ID event is binlogged.
-# Note, that because of WL#3368 mixed mode binlog records RBR events for the delayed
-let $table=t1;
-let $rows_inserted=11; # total number of inserted rows in this test
-insert delayed into t1 values (207);
-let $count=1;
 
-# use this macro instead of sleeps.
+let $table=t1;
+let $count=0;
 
+insert delayed into t1 values (207);
+inc $count;
 --source include/wait_until_rows_count.inc
+
 insert delayed into t1 values (null);
 inc $count;
 --source include/wait_until_rows_count.inc
@@ -20,9 +46,10 @@ insert delayed into t1 values (300);
 inc $count;
 --source include/wait_until_rows_count.inc
 
-# moving binlog check affront of multi-rows queries which work is indeterministic (extra table_maps)
-# todo: better check is to substitute SHOW BINLOG with reading from binlog, probably bug#19459 is in
-# the way
+# It is not enough to wait until all rows have been inserted into the
+# table. FLUSH TABLES ensures that they are in the binlog too.  See
+# comment above.
+FLUSH TABLES;
 source include/show_binlog_events.inc;
 
 insert delayed into t1 values (null),(null),(null),(null);
@@ -33,8 +60,5 @@ insert delayed into t1 values (null),(null),(400),(null);
 inc $count; inc $count; inc $count; inc $count;
 --source include/wait_until_rows_count.inc
 
-#check this assertion about $count calculation
---echo $count == $rows_inserted
-
 select * from t1;
 drop table t1;

mysql-test/extra/rpl_tests/rpl_row_basic.test

@@ -309,46 +309,46 @@ sync_slave_with_master;
 # 7. Replicating UTF-8 CHAR(255) to CHAR(255) UTF-8
 
 connection master;
-CREATE TABLE t1 (i INT NOT NULL,
-                 c CHAR(16) CHARACTER SET utf8 NOT NULL,
-                 j INT NOT NULL);
+eval CREATE TABLE t1 (i INT NOT NULL,
+                      c CHAR(16) CHARACTER SET utf8 NOT NULL,
+                      j INT NOT NULL) ENGINE = $type ;
 
-CREATE TABLE t2 (i INT NOT NULL,
-                 c CHAR(16) CHARACTER SET utf8 NOT NULL,
-                 j INT NOT NULL);
+eval CREATE TABLE t2 (i INT NOT NULL,
+                      c CHAR(16) CHARACTER SET utf8 NOT NULL,
+                      j INT NOT NULL) ENGINE = $type ;
 
 sync_slave_with_master;
 ALTER TABLE t2 MODIFY c CHAR(128) CHARACTER SET utf8 NOT NULL;
 
 connection master;
-CREATE TABLE t3 (i INT NOT NULL,
-                 c CHAR(128) CHARACTER SET utf8 NOT NULL,
-                 j INT NOT NULL);
+eval CREATE TABLE t3 (i INT NOT NULL,
+                      c CHAR(128) CHARACTER SET utf8 NOT NULL,
+                      j INT NOT NULL) ENGINE = $type ;
 sync_slave_with_master;
 ALTER TABLE t3 MODIFY c CHAR(16) CHARACTER SET utf8 NOT NULL;
 
 connection master;
-CREATE TABLE t4 (i INT NOT NULL,
-                 c CHAR(128) CHARACTER SET utf8 NOT NULL,
-                 j INT NOT NULL);
+eval CREATE TABLE t4 (i INT NOT NULL,
+                      c CHAR(128) CHARACTER SET utf8 NOT NULL,
+                      j INT NOT NULL) ENGINE = $type ;
 
-CREATE TABLE t5 (i INT NOT NULL,
-                 c CHAR(255) CHARACTER SET utf8 NOT NULL,
-                 j INT NOT NULL);
+eval CREATE TABLE t5 (i INT NOT NULL,
+                      c CHAR(255) CHARACTER SET utf8 NOT NULL,
+                      j INT NOT NULL) ENGINE = $type ;
 sync_slave_with_master;
 ALTER TABLE t5 MODIFY c CHAR(16) CHARACTER SET utf8 NOT NULL;
 
 connection master;
-CREATE TABLE t6 (i INT NOT NULL,
-                 c CHAR(255) CHARACTER SET utf8 NOT NULL,
-                 j INT NOT NULL);
+eval CREATE TABLE t6 (i INT NOT NULL,
+                      c CHAR(255) CHARACTER SET utf8 NOT NULL,
+                      j INT NOT NULL) ENGINE = $type ;
 sync_slave_with_master;
 ALTER TABLE t6 MODIFY c CHAR(128) CHARACTER SET utf8 NOT NULL;
 
 connection master;
-CREATE TABLE t7 (i INT NOT NULL,
-                 c CHAR(255) CHARACTER SET utf8 NOT NULL,
-                 j INT NOT NULL);
+eval CREATE TABLE t7 (i INT NOT NULL,
+                      c CHAR(255) CHARACTER SET utf8 NOT NULL,
+                      j INT NOT NULL) ENGINE = $type ;
 
 --echo [expecting slave to replicate correctly]
 connection master;
@@ -381,7 +381,11 @@ let $last_error = query_get_value("SHOW SLAVE STATUS", Last_SQL_Error, 1);
 disable_query_log;
 eval SELECT "$last_error" AS Last_SQL_Error;
 enable_query_log;
-SET GLOBAL SQL_SLAVE_SKIP_COUNTER=8;
+connection master;
+RESET MASTER;
+connection slave;
+STOP SLAVE;
+RESET SLAVE;
 START SLAVE;
 source include/wait_for_slave_to_start.inc;
 
@@ -406,7 +410,11 @@ let $last_error = query_get_value("SHOW SLAVE STATUS", Last_SQL_Error, 1);
 disable_query_log;
 eval SELECT "$last_error" AS Last_SQL_Error;
 enable_query_log;
-SET GLOBAL SQL_SLAVE_SKIP_COUNTER=8;
+connection master;
+RESET MASTER;
+connection slave;
+STOP SLAVE;
+RESET SLAVE;
 START SLAVE;
 source include/wait_for_slave_to_start.inc;
 
@@ -421,7 +429,11 @@ let $last_error = query_get_value("SHOW SLAVE STATUS", Last_SQL_Error, 1);
 disable_query_log;
 eval SELECT "$last_error" AS Last_SQL_Error;
 enable_query_log;
-SET GLOBAL SQL_SLAVE_SKIP_COUNTER=8;
+connection master;
+RESET MASTER;
+connection slave;
+STOP SLAVE;
+RESET SLAVE;
 START SLAVE;
 source include/wait_for_slave_to_start.inc;
 

mysql-test/include/show_binlog_events.inc

@@ -4,7 +4,7 @@ if (!$binlog_start)
 {
   let $binlog_start=106;
 }
---replace_result $binlog_start <binlog_start>
+--replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR $binlog_start <binlog_start>
 --replace_column 2 # 4 # 5 #
---replace_regex /\/\* xid=.* \*\//\/* XID *\// /table_id: [0-9]+/table_id: #/ /file_id=[0-9]+/file_id=#/
+--replace_regex /\/\* xid=.* \*\//\/* XID *\// /table_id: [0-9]+/table_id: #/ /file_id=[0-9]+/file_id=#/ /block_len=[0-9]+/block_len=#/
 --eval show binlog events from $binlog_start

mysql-test/suite/binlog/r/binlog_killed_simulate.result

@@ -18,7 +18,7 @@ load data infile '../std_data_ln/rpl_loaddata.dat' into table t2 /* will be "kil
 ERROR 70100: Query execution was interrupted
 show binlog events from <binlog_start>;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
-master-bin.000001	#	Begin_load_query	#	#	;file_id=#;block_len=12
+master-bin.000001	#	Begin_load_query	#	#	;file_id=#;block_len=#
 master-bin.000001	#	Execute_load_query	#	#	use `test`; load data infile '../std_data_ln/rpl_loaddata.dat' into table t2 /* will be "killed" in the middle */ ;file_id=#
 select
 (@a:=load_file("MYSQLTEST_VARDIR/tmp/binlog_killed_bug27571.binlog"))

mysql-test/suite/binlog/r/binlog_row_binlog.result

@@ -1141,10 +1141,10 @@ master-bin.000001	#	Delete_rows	#	#	table_id: # flags: STMT_END_F
 master-bin.000001	#	Query	#	#	use `mysql`; COMMIT
 drop table t1,t2,t3,tt1;
 create table t1 (a int not null auto_increment, primary key (a)) engine=myisam;
-set @@session.auto_increment_increment=1, @@session.auto_increment_offset=1;
 insert delayed into t1 values (207);
 insert delayed into t1 values (null);
 insert delayed into t1 values (300);
+FLUSH TABLES;
 show binlog events from <binlog_start>;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	use `test`; create table t1 (id tinyint auto_increment primary key)
@@ -1188,9 +1188,9 @@ master-bin.000001	#	Query	#	#	use `test`; BEGIN
 master-bin.000001	#	Table_map	#	#	table_id: # (test.t1)
 master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
 master-bin.000001	#	Query	#	#	use `test`; COMMIT
+master-bin.000001	#	Query	#	#	use `test`; FLUSH TABLES
 insert delayed into t1 values (null),(null),(null),(null);
 insert delayed into t1 values (null),(null),(400),(null);
-11 == 11
 select * from t1;
 a
 207

mysql-test/suite/binlog/r/binlog_row_mix_innodb_myisam.result

@@ -926,7 +926,7 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	use `test`; BEGIN
 master-bin.000001	#	Intvar	#	#	INSERT_ID=10
 master-bin.000001	#	User var	#	#	@`b`=_latin1 0x3135 COLLATE latin1_swedish_ci
-master-bin.000001	#	Begin_load_query	#	#	;file_id=#;block_len=12
+master-bin.000001	#	Begin_load_query	#	#	;file_id=#;block_len=#
 master-bin.000001	#	Intvar	#	#	INSERT_ID=10
 master-bin.000001	#	User var	#	#	@`b`=_latin1 0x3135 COLLATE latin1_swedish_ci
 master-bin.000001	#	Execute_load_query	#	#	use `test`; load data infile '../std_data_ln/rpl_loaddata.dat' into table t4 (a, @b) set b= @b + bug27417(2) ;file_id=#

mysql-test/suite/binlog/r/binlog_statement_insert_delayed.result

 create table t1 (a int not null auto_increment, primary key (a)) engine=myisam;
-set @@session.auto_increment_increment=1, @@session.auto_increment_offset=1;
 insert delayed into t1 values (207);
 insert delayed into t1 values (null);
 insert delayed into t1 values (300);
+FLUSH TABLES;
 show binlog events from <binlog_start>;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	use `test`; create table t1 (a int not null auto_increment, primary key (a)) engine=myisam
@@ -10,9 +10,9 @@ master-bin.000001	#	Query	#	#	use `test`; insert delayed into t1 values (207)
 master-bin.000001	#	Intvar	#	#	INSERT_ID=208
 master-bin.000001	#	Query	#	#	use `test`; insert delayed into t1 values (null)
 master-bin.000001	#	Query	#	#	use `test`; insert delayed into t1 values (300)
+master-bin.000001	#	Query	#	#	use `test`; FLUSH TABLES
 insert delayed into t1 values (null),(null),(null),(null);
 insert delayed into t1 values (null),(null),(400),(null);
-11 == 11
 select * from t1;
 a
 207

mysql-test/suite/binlog/r/binlog_stm_binlog.result

@@ -629,10 +629,10 @@ master-bin.000001	#	Query	#	#	use `mysql`; UPDATE user SET password=password('An
 master-bin.000001	#	Query	#	#	use `mysql`; DELETE FROM user WHERE host='localhost' AND user='@#@'
 drop table t1,t2,t3,tt1;
 create table t1 (a int not null auto_increment, primary key (a)) engine=myisam;
-set @@session.auto_increment_increment=1, @@session.auto_increment_offset=1;
 insert delayed into t1 values (207);
 insert delayed into t1 values (null);
 insert delayed into t1 values (300);
+FLUSH TABLES;
 show binlog events from <binlog_start>;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	use `test`; create table t1 (id tinyint auto_increment primary key)
@@ -660,9 +660,9 @@ master-bin.000001	#	Query	#	#	use `test`; BEGIN
 master-bin.000001	#	Table_map	#	#	table_id: # (test.t1)
 master-bin.000001	#	Write_rows	#	#	table_id: # flags: STMT_END_F
 master-bin.000001	#	Query	#	#	use `test`; COMMIT
+master-bin.000001	#	Query	#	#	use `test`; FLUSH TABLES
 insert delayed into t1 values (null),(null),(null),(null);
 insert delayed into t1 values (null),(null),(400),(null);
-11 == 11
 select * from t1;
 a
 207

mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result

@@ -623,7 +623,7 @@ show binlog events from <binlog_start>;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	use `test`; BEGIN
 master-bin.000001	#	Intvar	#	#	INSERT_ID=10
-master-bin.000001	#	Begin_load_query	#	#	;file_id=#;block_len=12
+master-bin.000001	#	Begin_load_query	#	#	;file_id=#;block_len=#
 master-bin.000001	#	Intvar	#	#	INSERT_ID=10
 master-bin.000001	#	Execute_load_query	#	#	use `test`; load data infile '../std_data_ln/rpl_loaddata.dat' into table t4 (a, @b) set b= @b + bug27417(2) ;file_id=#
 master-bin.000001	#	Query	#	#	use `test`; ROLLBACK
@@ -858,7 +858,7 @@ Log_name	Pos	Event_type	Server_id	End_log_pos	Info
 master-bin.000001	#	Query	#	#	use `test`; BEGIN
 master-bin.000001	#	Intvar	#	#	INSERT_ID=10
 master-bin.000001	#	User var	#	#	@`b`=_latin1 0x3135 COLLATE latin1_swedish_ci
-master-bin.000001	#	Begin_load_query	#	#	;file_id=#;block_len=12
+master-bin.000001	#	Begin_load_query	#	#	;file_id=#;block_len=#
 master-bin.000001	#	Intvar	#	#	INSERT_ID=10
 master-bin.000001	#	User var	#	#	@`b`=_latin1 0x3135 COLLATE latin1_swedish_ci
 master-bin.000001	#	Execute_load_query	#	#	use `test`; load data infile '../std_data_ln/rpl_loaddata.dat' into table t4 (a, @b) set b= @b + bug27417(2) ;file_id=#

mysql-test/suite/rpl/r/rpl_loaddata_map.result

@@ -4,6 +4,8 @@ reset master;
 reset slave;
 drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
+==== Create a big file ====
+==== Load our big file into a table ====
 create table t2 (id int not null primary key auto_increment);
 select @@session.read_buffer_size - @@session.max_allowed_packet > 0 ;
 @@session.read_buffer_size - @@session.max_allowed_packet > 0
@@ -12,15 +14,18 @@ load data infile 'MYSQLTEST_VARDIR/tmp/bug30435_5k.txt' into table t2;
 select count(*) from t2 /* 5 000 */;
 count(*)
 5000
-show binlog events in 'master-bin.000002' from <binlog_start>;
+show binlog events from <binlog_start>;
 Log_name	Pos	Event_type	Server_id	End_log_pos	Info
-master-bin.000002	#	Query	#	#	use `test`; create table t2 (id int not null primary key auto_increment)
-master-bin.000002	#	Begin_load_query	#	#	;file_id=#;block_len=#
-master-bin.000002	#	Append_block	#	#	;file_id=#;block_len=#
-master-bin.000002	#	Append_block	#	#	;file_id=#;block_len=#
-master-bin.000002	#	Execute_load_query	#	#	use `test`; load data infile 'MYSQLTEST_VARDIR/tmp/bug30435_5k.txt' into table t2 ;file_id=#
+master-bin.000001	#	Query	#	#	use `test`; create table t2 (id int not null primary key auto_increment)
+master-bin.000001	#	Begin_load_query	#	#	;file_id=#;block_len=#
+master-bin.000001	#	Append_block	#	#	;file_id=#;block_len=#
+master-bin.000001	#	Append_block	#	#	;file_id=#;block_len=#
+master-bin.000001	#	Execute_load_query	#	#	use `test`; load data infile 'MYSQLTEST_VARDIR/tmp/bug30435_5k.txt' into table t2 ;file_id=#
+==== Verify results on slave ====
+[on slave]
 select count(*) from t2 /* 5 000 */;
 count(*)
 5000
-drop table t1, t2;
-end of the tests
+==== Clean up ====
+[on master]
+drop table t2;

mysql-test/suite/rpl/r/rpl_row_basic_2myisam.result

@@ -453,29 +453,29 @@ a	b	c
 DROP TABLE IF EXISTS t1,t2,t3,t4,t5,t6,t7,t8;
 CREATE TABLE t1 (i INT NOT NULL,
 c CHAR(16) CHARACTER SET utf8 NOT NULL,
-j INT NOT NULL);
+j INT NOT NULL) ENGINE = 'MYISAM'  ;
 CREATE TABLE t2 (i INT NOT NULL,
 c CHAR(16) CHARACTER SET utf8 NOT NULL,
-j INT NOT NULL);
+j INT NOT NULL) ENGINE = 'MYISAM'  ;
 ALTER TABLE t2 MODIFY c CHAR(128) CHARACTER SET utf8 NOT NULL;
 CREATE TABLE t3 (i INT NOT NULL,
 c CHAR(128) CHARACTER SET utf8 NOT NULL,
-j INT NOT NULL);
+j INT NOT NULL) ENGINE = 'MYISAM'  ;
 ALTER TABLE t3 MODIFY c CHAR(16) CHARACTER SET utf8 NOT NULL;
 CREATE TABLE t4 (i INT NOT NULL,
 c CHAR(128) CHARACTER SET utf8 NOT NULL,
-j INT NOT NULL);
+j INT NOT NULL) ENGINE = 'MYISAM'  ;
 CREATE TABLE t5 (i INT NOT NULL,
 c CHAR(255) CHARACTER SET utf8 NOT NULL,
-j INT NOT NULL);
+j INT NOT NULL) ENGINE = 'MYISAM'  ;
 ALTER TABLE t5 MODIFY c CHAR(16) CHARACTER SET utf8 NOT NULL;
 CREATE TABLE t6 (i INT NOT NULL,
 c CHAR(255) CHARACTER SET utf8 NOT NULL,
-j INT NOT NULL);
+j INT NOT NULL) ENGINE = 'MYISAM'  ;
 ALTER TABLE t6 MODIFY c CHAR(128) CHARACTER SET utf8 NOT NULL;
 CREATE TABLE t7 (i INT NOT NULL,
 c CHAR(255) CHARACTER SET utf8 NOT NULL,
-j INT NOT NULL);
+j INT NOT NULL) ENGINE = 'MYISAM'  ;
 [expecting slave to replicate correctly]
 INSERT INTO t1 VALUES (1, "", 1);
 INSERT INTO t1 VALUES (2, repeat(_utf8'a', 16), 2);
@@ -489,7 +489,9 @@ INSERT INTO t3 VALUES (1, "", 1);
 INSERT INTO t3 VALUES (2, repeat(_utf8'a', 128), 2);
 Last_SQL_Error
 Table definition on master and slave does not match: Column 1 size mismatch - master has size 384, test.t3 on slave has size 49. Master's column size should be <= the slave's column size.
-SET GLOBAL SQL_SLAVE_SKIP_COUNTER=8;
+RESET MASTER;
+STOP SLAVE;
+RESET SLAVE;
 START SLAVE;
 [expecting slave to replicate correctly]
 INSERT INTO t4 VALUES (1, "", 1);
@@ -500,14 +502,18 @@ INSERT INTO t5 VALUES (1, "", 1);
 INSERT INTO t5 VALUES (2, repeat(_utf8'a', 255), 2);
 Last_SQL_Error
 Table definition on master and slave does not match: Column 1 size mismatch - master has size 765, test.t5 on slave has size 49. Master's column size should be <= the slave's column size.
-SET GLOBAL SQL_SLAVE_SKIP_COUNTER=8;
+RESET MASTER;
+STOP SLAVE;
+RESET SLAVE;
 START SLAVE;
 [expecting slave to stop]
 INSERT INTO t6 VALUES (1, "", 1);
 INSERT INTO t6 VALUES (2, repeat(_utf8'a', 255), 2);
 Last_SQL_Error
 Table definition on master and slave does not match: Column 1 size mismatch - master has size 765, test.t6 on slave has size 385. Master's column size should be <= the slave's column size.
-SET GLOBAL SQL_SLAVE_SKIP_COUNTER=8;
+RESET MASTER;
+STOP SLAVE;
+RESET SLAVE;
 START SLAVE;
 [expecting slave to replicate correctly]
 INSERT INTO t7 VALUES (1, "", 1);

mysql-test/suite/rpl/r/rpl_row_basic_3innodb.result

@@ -453,29 +453,29 @@ a	b	c
 DROP TABLE IF EXISTS t1,t2,t3,t4,t5,t6,t7,t8;
 CREATE TABLE t1 (i INT NOT NULL,
 c CHAR(16) CHARACTER SET utf8 NOT NULL,
-j INT NOT NULL);
+j INT NOT NULL) ENGINE = 'INNODB'  ;
 CREATE TABLE t2 (i INT NOT NULL,
 c CHAR(16) CHARACTER SET utf8 NOT NULL,
-j INT NOT NULL);
+j INT NOT NULL) ENGINE = 'INNODB'  ;
 ALTER TABLE t2 MODIFY c CHAR(128) CHARACTER SET utf8 NOT NULL;
 CREATE TABLE t3 (i INT NOT NULL,
 c CHAR(128) CHARACTER SET utf8 NOT NULL,
-j INT NOT NULL);
+j INT NOT NULL) ENGINE = 'INNODB'  ;
 ALTER TABLE t3 MODIFY c CHAR(16) CHARACTER SET utf8 NOT NULL;
 CREATE TABLE t4 (i INT NOT NULL,
 c CHAR(128) CHARACTER SET utf8 NOT NULL,
-j INT NOT NULL);
+j INT NOT NULL) ENGINE = 'INNODB'  ;
 CREATE TABLE t5 (i INT NOT NULL,
 c CHAR(255) CHARACTER SET utf8 NOT NULL,
-j INT NOT NULL);
+j INT NOT NULL) ENGINE = 'INNODB'  ;
 ALTER TABLE t5 MODIFY c CHAR(16) CHARACTER SET utf8 NOT NULL;
 CREATE TABLE t6 (i INT NOT NULL,
 c CHAR(255) CHARACTER SET utf8 NOT NULL,
-j INT NOT NULL);
+j INT NOT NULL) ENGINE = 'INNODB'  ;
 ALTER TABLE t6 MODIFY c CHAR(128) CHARACTER SET utf8 NOT NULL;
 CREATE TABLE t7 (i INT NOT NULL,
 c CHAR(255) CHARACTER SET utf8 NOT NULL,
-j INT NOT NULL);
+j INT NOT NULL) ENGINE = 'INNODB'  ;
 [expecting slave to replicate correctly]
 INSERT INTO t1 VALUES (1, "", 1);
 INSERT INTO t1 VALUES (2, repeat(_utf8'a', 16), 2);
@@ -489,7 +489,9 @@ INSERT INTO t3 VALUES (1, "", 1);
 INSERT INTO t3 VALUES (2, repeat(_utf8'a', 128), 2);
 Last_SQL_Error
 Table definition on master and slave does not match: Column 1 size mismatch - master has size 384, test.t3 on slave has size 49. Master's column size should be <= the slave's column size.
-SET GLOBAL SQL_SLAVE_SKIP_COUNTER=8;
+RESET MASTER;
+STOP SLAVE;
+RESET SLAVE;
 START SLAVE;
 [expecting slave to replicate correctly]
 INSERT INTO t4 VALUES (1, "", 1);
@@ -500,14 +502,18 @@ INSERT INTO t5 VALUES (1, "", 1);
 INSERT INTO t5 VALUES (2, repeat(_utf8'a', 255), 2);
 Last_SQL_Error
 Table definition on master and slave does not match: Column 1 size mismatch - master has size 765, test.t5 on slave has size 49. Master's column size should be <= the slave's column size.
-SET GLOBAL SQL_SLAVE_SKIP_COUNTER=8;
+RESET MASTER;
+STOP SLAVE;
+RESET SLAVE;
 START SLAVE;
 [expecting slave to stop]
 INSERT INTO t6 VALUES (1, "", 1);
 INSERT INTO t6 VALUES (2, repeat(_utf8'a', 255), 2);
 Last_SQL_Error
 Table definition on master and slave does not match: Column 1 size mismatch - master has size 765, test.t6 on slave has size 385. Master's column size should be <= the slave's column size.
-SET GLOBAL SQL_SLAVE_SKIP_COUNTER=8;
+RESET MASTER;
+STOP SLAVE;
+RESET SLAVE;
 START SLAVE;
 [expecting slave to replicate correctly]
 INSERT INTO t7 VALUES (1, "", 1);

mysql-test/suite/rpl/r/rpl_stm_log.result

@@ -196,7 +196,7 @@ master-bin.000001	#	Intvar	#	#	INSERT_ID=1
 master-bin.000001	#	Query	#	#	use `test`; insert into t1 values (NULL)
 master-bin.000001	#	Query	#	#	use `test`; drop table t1
 master-bin.000001	#	Query	#	#	use `test`; create table t1 (word char(20) not null)ENGINE=MyISAM
-master-bin.000001	#	Begin_load_query	#	#	;file_id=#;block_len=581
+master-bin.000001	#	Begin_load_query	#	#	;file_id=#;block_len=#
 master-bin.000001	#	Execute_load_query	#	#	use `test`; load data infile '../std_data_ln/words.dat' into table t1 ignore 1 lines ;file_id=#
 master-bin.000001	#	Rotate	#	#	master-bin.000002;pos=4
 show binlog events in 'master-bin.000002';

mysql-test/suite/rpl/r/rpl_variables.result

@@ -45,7 +45,7 @@ RESET SLAVE;
 RESET MASTER;
 START SLAVE;
 [on slave]
-SET @@global.init_slave = 'ant';
+SET @@global.init_slave = 'SELECT 1';
 [on master]
 CREATE TABLE tstmt (id INT AUTO_INCREMENT PRIMARY KEY,
 truth BOOLEAN,
@@ -66,9 +66,9 @@ SET @@global.sync_binlog = 2000000;
 INSERT INTO tstmt(num) VALUES (@@global.sync_binlog);
 SET @@global.sync_binlog = 3000000;
 INSERT INTO tstmt(num) VALUES (@@global.sync_binlog);
-SET @@global.init_slave = 'bison';
+SET @@global.init_slave = 'SELECT 2';
 INSERT INTO tstmt(text) VALUES (@@global.init_slave);
-SET @@global.init_slave = 'cat';
+SET @@global.init_slave = 'SELECT 3';
 INSERT INTO tstmt(text) VALUES (@@global.init_slave);
 SET @@global.slave_exec_mode = 'IDEMPOTENT';
 INSERT INTO tstmt(text) VALUES (@@global.slave_exec_mode);
@@ -140,9 +140,9 @@ INSERT INTO tproc(num) VALUES (@@global.sync_binlog);
 SET @@global.sync_binlog = 3000000;
 INSERT INTO tproc(num) VALUES (@@global.sync_binlog);
 # string
-SET @@global.init_slave = 'bison';
+SET @@global.init_slave = 'SELECT 2';
 INSERT INTO tproc(text) VALUES (@@global.init_slave);
-SET @@global.init_slave = 'cat';
+SET @@global.init_slave = 'SELECT 3';
 INSERT INTO tproc(text) VALUES (@@global.init_slave);
 # enumeration
 SET @@global.slave_exec_mode = 'IDEMPOTENT';
@@ -226,9 +226,9 @@ INSERT INTO tfunc(num) VALUES (@@global.sync_binlog);
 SET @@global.sync_binlog = 3000000;
 INSERT INTO tfunc(num) VALUES (@@global.sync_binlog);
 # string
-SET @@global.init_slave = 'bison';
+SET @@global.init_slave = 'SELECT 2';
 INSERT INTO tfunc(text) VALUES (@@global.init_slave);
-SET @@global.init_slave = 'cat';
+SET @@global.init_slave = 'SELECT 3';
 INSERT INTO tfunc(text) VALUES (@@global.init_slave);
 # enumeration
 SET @@global.slave_exec_mode = 'IDEMPOTENT';
@@ -316,9 +316,9 @@ INSERT INTO ttrig(num) VALUES (@@global.sync_binlog);
 SET @@global.sync_binlog = 3000000;
 INSERT INTO ttrig(num) VALUES (@@global.sync_binlog);
 # string
-SET @@global.init_slave = 'bison';
+SET @@global.init_slave = 'SELECT 2';
 INSERT INTO ttrig(text) VALUES (@@global.init_slave);
-SET @@global.init_slave = 'cat';
+SET @@global.init_slave = 'SELECT 3';
 INSERT INTO ttrig(text) VALUES (@@global.init_slave);
 # enumeration
 SET @@global.slave_exec_mode = 'IDEMPOTENT';
@@ -395,9 +395,9 @@ PREPARE p5 FROM 'SET @@global.sync_binlog = 2000000';
 PREPARE p6 FROM 'INSERT INTO tprep(num) VALUES (@@global.sync_binlog)';
 PREPARE p7 FROM 'SET @@global.sync_binlog = 3000000';
 PREPARE p8 FROM 'INSERT INTO tprep(num) VALUES (@@global.sync_binlog)';
-PREPARE p9 FROM 'SET @@global.init_slave = \'bison\'';
+PREPARE p9 FROM 'SET @@global.init_slave = \'SELECT 2\'';
 PREPARE p10 FROM 'INSERT INTO tprep(text) VALUES (@@global.init_slave)';
-PREPARE p11 FROM 'SET @@global.init_slave = \'cat\'';
+PREPARE p11 FROM 'SET @@global.init_slave = \'SELECT 3\'';
 PREPARE p12 FROM 'INSERT INTO tprep(text) VALUES (@@global.init_slave)';
 PREPARE p13 FROM 'SET @@global.slave_exec_mode = \'IDEMPOTENT\'';
 PREPARE p14 FROM 'INSERT INTO tprep(text) VALUES (@@global.slave_exec_mode)';
@@ -522,8 +522,8 @@ id	truth	num	text
 2	0	NULL	NULL
 3	NULL	2000000	NULL
 4	NULL	3000000	NULL
-5	NULL	NULL	bison
-6	NULL	NULL	cat
+5	NULL	NULL	SELECT 2
+6	NULL	NULL	SELECT 3
 7	NULL	NULL	IDEMPOTENT
 8	NULL	NULL	STRICT
 9	1	NULL	NULL

mysql-test/suite/rpl/t/rpl_incident.test

@@ -19,6 +19,37 @@ connection slave;
 # The 4 should not be inserted into the table, since the incident log
 # event should have stop the slave.
 --echo **** On Slave ****
+#### BEGIN DEBUG INFO ADDED BY SVEN 2008-07-18 -- SEE BUG#38077 ####
+let $tables= query_get_value(SHOW TABLES, Tables_in_test, 1);
+if (`SELECT '$tables' != 't1'`)
+{
+  --echo **** TEST CASE BUG! PRINTING DEBUG INFO! ****
+  --echo **** Dear developer, if you see this in the output of a test
+  --echo **** case run, please add all the information below as a
+  --echo **** comment to BUG#38077. If it's a pushbuild failure, please
+  --echo **** include a link to the push page.
+  --echo **** Thank you! /Sven
+  SHOW BINLOG EVENTS;
+  --echo **** master binlog ****
+  --error 0,1
+  --exec $MYSQL_BINLOG --hexdump $MYSQLTEST_VARDIR/log/master-bin.000001
+  --echo **** slave binlog ****
+  --error 0,1
+  --exec $MYSQL_BINLOG --hexdump $MYSQLTEST_VARDIR/log/slave-bin.000001
+  --echo **** slave status ****
+  query_vertical SHOW SLAVE STATUS;
+  --echo **** slave's master status ****
+  SHOW MASTER STATUS;
+  --echo **** slave binlog events ****
+  --echo [on master]
+  connection master;
+  --echo **** master status ****
+  SHOW MASTER STATUS;
+  --echo **** master binlog events ****
+  SHOW BINLOG EVENTS;
+  exit;
+}
+#### END DEBUG INFO ####
 SELECT * FROM t1;
 
 --replace_result $MASTER_MYPORT MASTER_PORT

mysql-test/suite/rpl/t/rpl_loaddata_map.test

+# ==== Purpose ====
 #
 #  check replication of load data with the server parameters subjected to
 #  read_buffer_size > max_allowed_packet
 #
+# ==== Implementation ====
+#
+# Insert many rows into t1, write t1 to file.
+# Load the file into t2.
+# See that t2 came out as expected on slave.
+#
+# ==== Related Bugs ====
+#
 #  BUG#30435 loading large LOAD DATA INFILE breaks slave with 
 #            read_buffer_size set on master
 #  BUG#33413 show binlog events fails if binlog has event size of close
@@ -9,10 +18,17 @@
 
 source include/have_binlog_format_mixed_or_statement.inc;
 source include/master-slave.inc;
-source include/have_innodb.inc;
-source include/have_binlog_format_mixed_or_statement.inc;
+
+
+--echo ==== Create a big file ====
+
+# We turn off binlogging to avoid too much noise in the binlog. t1 is
+# just an auxiliary construction anyways, it is not needed on the
+# slave.
 
 --disable_query_log
+SET @@sql_log_bin= 0;
+
 let $rows= 5000;
 create table t1 (id int not null primary key auto_increment);
 
@@ -22,10 +38,13 @@ while($rows)
   dec $rows;
 }
 eval select * into outfile '$MYSQLTEST_VARDIR/tmp/bug30435_5k.txt' from t1;
-flush logs;
+
+DROP TABLE t1;
+SET @@sql_log_bin= 1;
 --enable_query_log
 
-connection master;
+
+--echo ==== Load our big file into a table ====
 create table t2 (id int not null primary key auto_increment);
 
 select @@session.read_buffer_size - @@session.max_allowed_packet > 0 ;
@@ -34,21 +53,21 @@ select @@session.read_buffer_size - @@session.max_allowed_packet > 0 ;
 eval load data infile '$MYSQLTEST_VARDIR/tmp/bug30435_5k.txt' into table t2;
 select count(*) from t2 /* 5 000 */;
 
-# the binglog will show fragmented Append_block events
---let $binlog_start=106
---replace_column 2 # 4 # 5 #
---replace_regex /\/\* xid=.* \*\//\/* XID *\// /file_id=[0-9]+/file_id=#/ /block_len=[0-9]+/block_len=#/
---replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR $binlog_start <binlog_start>
---eval show binlog events in 'master-bin.000002' from $binlog_start
+# the binlog will show fragmented Append_block events
+source include/show_binlog_events.inc;
+
 
+--echo ==== Verify results on slave ====
 
+--echo [on slave]
 sync_slave_with_master;
-#connection slave;
 select count(*) from t2 /* 5 000 */;
 
+
+--echo ==== Clean up ====
+
+--echo [on master]
 connection master;
-drop table t1, t2;
+drop table t2;
 sync_slave_with_master;
 remove_file $MYSQLTEST_VARDIR/tmp/bug30435_5k.txt;
-
---echo end of the tests

mysql-test/suite/rpl/t/rpl_row_err_daisychain-master.opt

---binlog-format=row

mysql-test/suite/rpl/t/rpl_row_err_daisychain-slave.opt

---binlog-format=statement --log-slave-updates

mysql-test/suite/rpl/t/rpl_trunc_temp.test

-# Requires statement logging
+# ==== Purpose ====
+#
+# Verify that Slave_open_temp_tables is increased when a temporary
+# table is opened on the slave, and decreased when a temporary table
+# is closed on the slave, and that it is preserved during 'DELETE FROM
+# table' and 'TRUNCATE table'.
+#
+# ==== Method ====
+#
+# Create a temporary table on master, insert rows, and try:
+#  - delete rows from the table
+#  - truncate the table
+#  - drop the table
+#
+# ==== Related bugs ====
+#
+# BUG#17137 Running "truncate table" on temporary table leaves the table open on a slave
+#
+# Bug in this test: BUG#37493: rpl_trunc_temp.test nondeterministic
+
+
+# Requires statement-based logging since temporary tables are not
+# logged in row-based logging
 -- source include/have_binlog_format_mixed_or_statement.inc
 
 source include/master-slave.inc;
 
-#
-# Bug#17137 Running "truncate table" on temporary table
-# leaves the table open on a slave
-#
-
 create temporary table t1 (n int);
 insert into t1 values(1);
 sync_slave_with_master;
@@ -28,13 +45,10 @@ show status like 'Slave_open_temp_tables';
 # Disconnect the master, temp table on slave should dissapear
 disconnect master;
 
-connection master1;
-# Wait until drop of temp tables appers in binlog
+connection slave;
+
+# Wait until drop of temp tables appers in slave's binlog
 let $wait_binlog_event= DROP;
 source include/wait_for_binlog_event.inc;
 
-connection slave;
 show status like 'Slave_open_temp_tables';
-
-
-# End of 4.1 tests

mysql-test/suite/rpl/t/rpl_truncate_7ndb_2-master.opt

---binlog-format=mixed

mysql-test/suite/rpl/t/rpl_truncate_7ndb_2.test

 # Same test as rpl_truncate_7ndb.test, but with mixed mode
 # This is marked with 'big_test' just because the rpl_truncate_7ndb test is
 # so slow...
-
+--source include/have_binlog_format_mixed.inc
 --source include/big_test.inc
 --source t/rpl_truncate_7ndb.test

mysql-test/suite/rpl/t/rpl_variables.test

@@ -117,7 +117,7 @@ source include/reset_master_and_slave.inc;
 # above, but can't because it affects how the slave works.
 --echo [on slave]
 connection slave;
-SET @@global.init_slave = 'ant';
+SET @@global.init_slave = 'SELECT 1';
 
 
 --echo [on master]
@@ -154,9 +154,9 @@ SET @@global.sync_binlog = 3000000;
 INSERT INTO tstmt(num) VALUES (@@global.sync_binlog);
 
 # string
-SET @@global.init_slave = 'bison';
+SET @@global.init_slave = 'SELECT 2';
 INSERT INTO tstmt(text) VALUES (@@global.init_slave);
-SET @@global.init_slave = 'cat';
+SET @@global.init_slave = 'SELECT 3';
 INSERT INTO tstmt(text) VALUES (@@global.init_slave);
 
 # enumeration
@@ -258,9 +258,9 @@ BEGIN
   INSERT INTO tproc(num) VALUES (@@global.sync_binlog);
 
   # string
-  SET @@global.init_slave = 'bison';
+  SET @@global.init_slave = 'SELECT 2';
   INSERT INTO tproc(text) VALUES (@@global.init_slave);
-  SET @@global.init_slave = 'cat';
+  SET @@global.init_slave = 'SELECT 3';
   INSERT INTO tproc(text) VALUES (@@global.init_slave);
 
   # enumeration
@@ -367,9 +367,9 @@ BEGIN
   INSERT INTO tfunc(num) VALUES (@@global.sync_binlog);
 
   # string
-  SET @@global.init_slave = 'bison';
+  SET @@global.init_slave = 'SELECT 2';
   INSERT INTO tfunc(text) VALUES (@@global.init_slave);
-  SET @@global.init_slave = 'cat';
+  SET @@global.init_slave = 'SELECT 3';
   INSERT INTO tfunc(text) VALUES (@@global.init_slave);
 
   # enumeration
@@ -478,9 +478,9 @@ BEGIN
   INSERT INTO ttrig(num) VALUES (@@global.sync_binlog);
 
   # string
-  SET @@global.init_slave = 'bison';
+  SET @@global.init_slave = 'SELECT 2';
   INSERT INTO ttrig(text) VALUES (@@global.init_slave);
-  SET @@global.init_slave = 'cat';
+  SET @@global.init_slave = 'SELECT 3';
   INSERT INTO ttrig(text) VALUES (@@global.init_slave);
 
   # enumeration
@@ -581,9 +581,9 @@ PREPARE p7 FROM 'SET @@global.sync_binlog = 3000000';
 PREPARE p8 FROM 'INSERT INTO tprep(num) VALUES (@@global.sync_binlog)';
 
 # string
-PREPARE p9 FROM 'SET @@global.init_slave = \'bison\'';
+PREPARE p9 FROM 'SET @@global.init_slave = \'SELECT 2\'';
 PREPARE p10 FROM 'INSERT INTO tprep(text) VALUES (@@global.init_slave)';
-PREPARE p11 FROM 'SET @@global.init_slave = \'cat\'';
+PREPARE p11 FROM 'SET @@global.init_slave = \'SELECT 3\'';
 PREPARE p12 FROM 'INSERT INTO tprep(text) VALUES (@@global.init_slave)';
 
 # enumeration

mysql-test/suite/rpl_ndb/r/rpl_row_basic_7ndb.result

@@ -437,7 +437,7 @@ SELECT COUNT(*) FROM t1 ORDER BY c1,c2;
 COUNT(*)	0
 set @@global.slave_exec_mode= default;
 Last_SQL_Error
-0
+
 SELECT COUNT(*) FROM t1 ORDER BY c1,c2;
 COUNT(*)	0
 **** Test for BUG#37076 ****
@@ -451,3 +451,72 @@ SELECT * FROM t1;
 a	b	c
 2005-11-14 01:01:01	2005-11-14 01:01:02	2005-11-14
 DROP TABLE IF EXISTS t1,t2,t3,t4,t5,t6,t7,t8;
+CREATE TABLE t1 (i INT NOT NULL,
+c CHAR(16) CHARACTER SET utf8 NOT NULL,
+j INT NOT NULL) ENGINE = 'NDB'  ;
+CREATE TABLE t2 (i INT NOT NULL,
+c CHAR(16) CHARACTER SET utf8 NOT NULL,
+j INT NOT NULL) ENGINE = 'NDB'  ;
+ALTER TABLE t2 MODIFY c CHAR(128) CHARACTER SET utf8 NOT NULL;
+CREATE TABLE t3 (i INT NOT NULL,
+c CHAR(128) CHARACTER SET utf8 NOT NULL,
+j INT NOT NULL) ENGINE = 'NDB'  ;
+ALTER TABLE t3 MODIFY c CHAR(16) CHARACTER SET utf8 NOT NULL;
+CREATE TABLE t4 (i INT NOT NULL,
+c CHAR(128) CHARACTER SET utf8 NOT NULL,
+j INT NOT NULL) ENGINE = 'NDB'  ;
+CREATE TABLE t5 (i INT NOT NULL,
+c CHAR(255) CHARACTER SET utf8 NOT NULL,
+j INT NOT NULL) ENGINE = 'NDB'  ;
+ALTER TABLE t5 MODIFY c CHAR(16) CHARACTER SET utf8 NOT NULL;
+CREATE TABLE t6 (i INT NOT NULL,
+c CHAR(255) CHARACTER SET utf8 NOT NULL,
+j INT NOT NULL) ENGINE = 'NDB'  ;
+ALTER TABLE t6 MODIFY c CHAR(128) CHARACTER SET utf8 NOT NULL;
+CREATE TABLE t7 (i INT NOT NULL,
+c CHAR(255) CHARACTER SET utf8 NOT NULL,
+j INT NOT NULL) ENGINE = 'NDB'  ;
+[expecting slave to replicate correctly]
+INSERT INTO t1 VALUES (1, "", 1);
+INSERT INTO t1 VALUES (2, repeat(_utf8'a', 16), 2);
+Comparing tables master:test.t1 and slave:test.t1
+[expecting slave to replicate correctly]
+INSERT INTO t2 VALUES (1, "", 1);
+INSERT INTO t2 VALUES (2, repeat(_utf8'a', 16), 2);
+Comparing tables master:test.t2 and slave:test.t2
+[expecting slave to stop]
+INSERT INTO t3 VALUES (1, "", 1);
+INSERT INTO t3 VALUES (2, repeat(_utf8'a', 128), 2);
+Last_SQL_Error
+Table definition on master and slave does not match: Column 1 size mismatch - master has size 384, test.t3 on slave has size 49. Master's column size should be <= the slave's column size.
+RESET MASTER;
+STOP SLAVE;
+RESET SLAVE;
+START SLAVE;
+[expecting slave to replicate correctly]
+INSERT INTO t4 VALUES (1, "", 1);
+INSERT INTO t4 VALUES (2, repeat(_utf8'a', 128), 2);
+Comparing tables master:test.t4 and slave:test.t4
+[expecting slave to stop]
+INSERT INTO t5 VALUES (1, "", 1);
+INSERT INTO t5 VALUES (2, repeat(_utf8'a', 255), 2);
+Last_SQL_Error
+Table definition on master and slave does not match: Column 1 size mismatch - master has size 765, test.t5 on slave has size 49. Master's column size should be <= the slave's column size.
+RESET MASTER;
+STOP SLAVE;
+RESET SLAVE;
+START SLAVE;
+[expecting slave to stop]
+INSERT INTO t6 VALUES (1, "", 1);
+INSERT INTO t6 VALUES (2, repeat(_utf8'a', 255), 2);
+Last_SQL_Error
+Table definition on master and slave does not match: Column 1 size mismatch - master has size 765, test.t6 on slave has size 385. Master's column size should be <= the slave's column size.
+RESET MASTER;
+STOP SLAVE;
+RESET SLAVE;
+START SLAVE;
+[expecting slave to replicate correctly]
+INSERT INTO t7 VALUES (1, "", 1);
+INSERT INTO t7 VALUES (2, repeat(_utf8'a', 255), 2);
+Comparing tables master:test.t7 and slave:test.t7
+drop table t1, t2, t3, t4, t5, t6, t7;

mysql-test/suite/rpl_ndb/t/disabled.def

@@ -12,6 +12,5 @@
 
 rpl_ndb_circular         : Bug#33849 COMMIT event missing in cluster circular replication.
 rpl_ndb_circular_simplex : Bug#33849 COMMIT event missing in cluster circular replication.
-rpl_row_basic_7ndb       : Bug#38369 rpl_ndb.rpl_row_basic_7ndb fails
 
 # the below testcase have been reworked to avoid the bug, test contains comment, keep bug open

sql/sql_binlog.cc

@@ -208,6 +208,7 @@ void mysql_client_binlog_statement(THD* thd)
 #if !defined(MYSQL_CLIENT) && defined(HAVE_REPLICATION)
       if (apply_event_and_update_pos(ev, thd, thd->rli_fake, FALSE))
       {
+        delete ev;
         /*
           TODO: Maybe a better error message since the BINLOG statement
           now contains several events.