Bug#18972488 Remove packaging/rpm-uln directory from source

packaging/rpm-uln/CMakeLists.txt

-# Copyright (c) 2012, Oracle and/or its affiliates. All rights reserved.
-# 
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; version 2 of the License.
-# 
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-# 
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
-
-
-IF(UNIX)
-  SET(prefix ${CMAKE_INSTALL_PREFIX})
-
-  SET(SPECFILENAME "mysql.${VERSION}.spec")
-  IF("${VERSION}" MATCHES "-ndb-")
-    STRING(REGEX REPLACE "^.*-ndb-" "" NDBVERSION "${VERSION}")
-    SET(SPECFILENAME "mysql-cluster-${NDBVERSION}.spec")
-  ENDIF()
-
-  # Left in current directory, to be taken during build
-  CONFIGURE_FILE(mysql.spec.sh ${CMAKE_CURRENT_BINARY_DIR}/${SPECFILENAME} @ONLY)
-
-  FOREACH(ulnfile filter-requires-mysql.sh generate-tarball.sh my.cnf my_config.h
-          mysql-5.5-errno.patch mysql-5.5-fix-tests.patch mysql-5.5-libdir.patch
-          mysql-5.5-mtr1.patch mysql-5.5-stack-guard.patch mysql-5.5-testing.patch
-          mysql-chain-certs.patch mysql-embedded-check.c mysql-expired-certs.patch
-          mysql.init mysql-install-test.patch mysql-strmov.patch scriptstub.c
-          README.mysql-docs)
-    CONFIGURE_FILE(${ulnfile} ${CMAKE_CURRENT_BINARY_DIR}/${ulnfile} COPYONLY)
-  ENDFOREACH()
-ENDIF()
-

packaging/rpm-uln/README-ULN

-In order to have RPMs of MySQL which are distributed via ULN for Oracle Linux
-to be as closely compatible to such RPMs built and distributed by RedHat,
-this directory contains additional files which originated at RedHat
-and are used only for such RPMs intended for distribution via ULN.
-
-Especially, this directory contains the spec file used to build these RPMs,
-named "mysql.spec".  Please regard the following note:
-
-    You are receiving a copy of the Red Hat spec file.
-    The terms of the Oracle license do NOT apply to the Red Hat spec file;
-    it is licensed under the
-          GNU GENERAL PUBLIC LICENSE Version 2, June 1991
-    separately from the Oracle programs you receive.
-
-

packaging/rpm-uln/README.mysql-docs

-The official MySQL documentation is not freely redistributable, so we cannot
-include it in RHEL or Fedora.  You can find it on-line at
-
-http://dev.mysql.com/doc/

packaging/rpm-uln/filter-requires-mysql.sh

-#!/bin/sh
-
-/usr/lib/rpm/perl.req $* | grep -v -e "perl(th" -e "perl(lib::mtr" -e "perl(mtr"

packaging/rpm-uln/generate-tarball.sh

-#!/bin/sh
-
-VERSION=$1
-
-rm -rf mysql-$VERSION
-
-tar xfz mysql-$VERSION.tar.gz || exit 1
-
-rm mysql-$VERSION/Docs/mysql.info
-
-tar cfz mysql-$VERSION-nodocs.tar.gz mysql-$VERSION || exit 1
-
-rm -rf mysql-$VERSION
-
-exit 0

packaging/rpm-uln/my.cnf

-[mysqld]
-datadir=/var/lib/mysql
-socket=/var/lib/mysql/mysql.sock
-user=mysql
-# Disabling symbolic-links is recommended to prevent assorted security risks
-symbolic-links=0
-
-[mysqld_safe]
-log-error=/var/log/mysqld.log
-pid-file=/var/run/mysqld/mysqld.pid

packaging/rpm-uln/my_config.h

-/*
- * Kluge to support multilib installation of both 32- and 64-bit RPMS:
- * we need to arrange that header files that appear in both RPMs are
- * identical.  Hence, this file is architecture-independent and calls
- * in an arch-dependent file that will appear in just one RPM.
- *
- * To avoid breaking arches not explicitly supported by Red Hat, we
- * use this indirection file *only* on known multilib arches.
- *
- * Note: this may well fail if user tries to use gcc's -I- option.
- * But that option is deprecated anyway.
- */
-#if defined(__x86_64__)
-#include "my_config_x86_64.h"
-#elif defined(__i386__)
-#include "my_config_i386.h"
-#elif defined(__ppc64__) || defined(__powerpc64__)
-#include "my_config_ppc64.h"
-#elif defined(__ppc__) || defined(__powerpc__)
-#include "my_config_ppc.h"
-#elif defined(__s390x__)
-#include "my_config_s390x.h"
-#elif defined(__s390__)
-#include "my_config_s390.h"
-#elif defined(__sparc__) && defined(__arch64__)
-#include "my_config_sparc64.h"
-#elif defined(__sparc__)
-#include "my_config_sparc.h"
-#endif

packaging/rpm-uln/mysql-5.5-errno.patch

-"extern int errno" is just a really bad idea.
-
-
-diff -Naur mysql-5.1.32.orig/include/my_sys.h mysql-5.1.32/include/my_sys.h
---- mysql-5.1.32.orig/include/my_sys.h	2009-02-13 19:52:19.000000000 -0500
-+++ mysql-5.1.32/include/my_sys.h	2009-03-04 18:08:40.000000000 -0500
-@@ -199,13 +199,8 @@
- #define my_afree(PTR) my_free(PTR)
- #endif /* HAVE_ALLOCA */
- 
--#ifndef errno				/* did we already get it? */
--#ifdef HAVE_ERRNO_AS_DEFINE
- #include <errno.h>			/* errno is a define */
--#else
--extern int errno;			/* declare errno */
--#endif
--#endif					/* #ifndef errno */
-+
- extern char *home_dir;			/* Home directory for user */
- extern const char *my_progname;		/* program-name (printed in errors) */
- extern char curr_dir[];		/* Current directory for user */

packaging/rpm-uln/mysql-5.5-fix-tests.patch

-Adapt tests (where needed) to RedHat conventions.
-
-1) The RedHat convention uses the package name "mysql*" whereas upstream uses "MySQL*".
-   Test "file_contents" constructs path names and needs to be adapted.
-
-=== modified file 'mysql-test/t/file_contents.test'
---- mysql-5.5.17-orig/mysql-test/t/file_contents.test	2011-10-10 12:03:29 +0000
-+++ mysql-5.5.17/mysql-test/t/file_contents.test	2011-11-16 18:07:55 +0000
-@@ -17,20 +17,20 @@ if ($dir_bin =~ m|/usr/|) {
-   $dir_docs =~ s|/lib|/share/doc|;
-   if(-d "$dir_docs/packages") {
-     # SuSE: "packages/" in the documentation path
--    $dir_docs = glob "$dir_docs/packages/MySQL-server*";
-+    $dir_docs = glob "$dir_docs/packages/mysql-server*";
-   } else {
-     # RedHat: version number in directory name
--    $dir_docs = glob "$dir_docs/MySQL-server*";
-+    $dir_docs = glob "$dir_docs/mysql-server*";
-   }
- } elsif ($dir_bin =~ m|/usr$|) {
-   # RPM build during development
-   $dir_docs = "$dir_bin/share/doc";
-   if(-d "$dir_docs/packages") {
-     # SuSE: "packages/" in the documentation path
--    $dir_docs = glob "$dir_docs/packages/MySQL-server*";
-+    $dir_docs = glob "$dir_docs/packages/mysql-server*";
-   } else {
-     # RedHat: version number in directory name
--    $dir_docs = glob "$dir_docs/MySQL-server*";
-+    $dir_docs = glob "$dir_docs/mysql-server*";
-   }
- } else {
-   # tar.gz package, Windows, or developer work (in BZR)
-

packaging/rpm-uln/mysql-5.5-libdir.patch

-The RPMs built by MySQL AB (-> Sun -> Oracle) put the libraries into "/usr/lib".
-Those built by RedHat put them into "/usr/lib/mysql".
-This patch is to modify the cmake files to follow the RedHat convention.
-Similar, the server is now in "/usr/libexec" (formerly "/usr/sbin").
-
-
-diff -Naur mysql-5.5.17.orig/cmake/install_layout.cmake mysql-5.5.17/cmake/install_layout.cmake
---- mysql-5.5.17.orig/cmake/install_layout.cmake	2011-06-30 15:46:53 +0000
-+++ mysql-5.5.17/cmake/install_layout.cmake	2011-10-27 16:40:10 +0000
-@@ -140,14 +140,14 @@ SET(INSTALL_SBINDIR_RPM                 
- # be applied at build time via "rpmbuild".
- #
- SET(INSTALL_BINDIR_RPM                  "bin")
--SET(INSTALL_SBINDIR_RPM                 "sbin")
-+SET(INSTALL_SBINDIR_RPM                 "libexec")
- SET(INSTALL_SCRIPTDIR_RPM               "bin")
- #
- IF(CMAKE_SYSTEM_PROCESSOR MATCHES "x86_64")
--  SET(INSTALL_LIBDIR_RPM                "lib64")
-+  SET(INSTALL_LIBDIR_RPM                "lib64/mysql")
-   SET(INSTALL_PLUGINDIR_RPM             "lib64/mysql/plugin")
- ELSE()
--  SET(INSTALL_LIBDIR_RPM                "lib")
-+  SET(INSTALL_LIBDIR_RPM                "lib/mysql")
-   SET(INSTALL_PLUGINDIR_RPM             "lib/mysql/plugin")
- ENDIF()
- #
-

packaging/rpm-uln/mysql-5.5-mtr1.patch

-Drop support for version 1 of "mysql-test-run.pl" from the RPMs:
-
-1) The auto-generation of Perl dependencies will mishandle that code,
-   probably because its run directory differs from its storage location.
-2) It does not provide several variables which are used in tests of MySQL 5.5
-
-If you really need it, take it from the source tarball.
-
-=== modified file 'mysql-test/mysql-test-run.pl'
---- mysql-5.5.17-orig/mysql-test/mysql-test-run.pl	2011-10-03 11:16:40 +0000
-+++ mysql-5.5.17/mysql-test/mysql-test-run.pl	2011-11-16 19:06:38 +0000
-@@ -58,10 +58,9 @@ BEGIN {
-   if ( $version == 1 )
-   {
-     print "=======================================================\n";
--    print "  WARNING: Using mysql-test-run.pl version 1!  \n";
-+    print "  ERROR: Support for version 1 is dropped in this distribution!  \n";
-     print "=======================================================\n";
--    # Should use exec() here on *nix but this appears not to work on Windows
--    exit(system($^X, "lib/v1/mysql-test-run.pl", @ARGV) >> 8);
-+    exit(1);
-   }
-   elsif ( $version == 2 )
-   {
-

packaging/rpm-uln/mysql-5.5-stack-guard.patch

-mysql is not accounting for the "guard page" when setting thread stack size
-requests.  This is fatal on PPC systems, which may use guard pages as large
-as 64K.  This patch also documents the IA64 situation a bit better.
-
-Note: there are quite a few other setstacksize calls besides the two in
-mysqld.cc; is it important to fix any of the others?
-
-Filed upstream at http://bugs.mysql.com/bug.php?id=35019
-
-
-diff -Naur mysql-5.1.30.orig/sql/mysqld.cc mysql-5.1.30/sql/mysqld.cc
---- mysql-5.1.30.orig/sql/mysqld.cc	2008-11-14 11:37:13.000000000 -0500
-+++ mysql-5.1.30/sql/mysqld.cc	2009-01-13 12:08:35.000000000 -0500
-@@ -2653,6 +2653,70 @@
- }
- 
- 
-+/* pthread_attr_setstacksize without so much platform-dependency */
-+/* returns the actual stack size if possible */
-+static size_t my_setstacksize(pthread_attr_t *attr, size_t stacksize)
-+{
-+  size_t guard_size = 0;
-+
-+#if defined(__ia64__) || defined(__ia64)
-+  /*
-+    On IA64, half of the requested stack size is used for "normal stack"
-+    and half for "register stack".  The space measured by check_stack_overrun
-+    is the "normal stack", so double the request to make sure we have the
-+    caller-expected amount of normal stack.
-+
-+    NOTE: there is no guarantee that the register stack can't grow faster
-+    than normal stack, so it's very unclear that we won't dump core due to
-+    stack overrun despite check_stack_overrun's efforts.  Experimentation
-+    shows that in the execution_constants test, the register stack grows
-+    less than half as fast as normal stack, but perhaps other scenarios are
-+    less forgiving.  If it turns out that more space is needed for the
-+    register stack, that could be forced (rather inefficiently) by using a
-+    multiplier higher than 2 here.
-+  */
-+  stacksize *= 2;
-+#endif
-+
-+  /*
-+    On many machines, the "guard space" is subtracted from the requested
-+    stack size, and that space is quite large on some platforms.  So add
-+    it to our request, if we can find out what it is.
-+
-+    FIXME: autoconfiscate use of pthread_attr_getguardsize
-+  */
-+  if (pthread_attr_getguardsize(attr, &guard_size))
-+    guard_size = 0;		/* if can't find it out, treat as 0 */
-+
-+  pthread_attr_setstacksize(attr, stacksize + guard_size);
-+
-+  /* Retrieve actual stack size if possible */
-+#ifdef HAVE_PTHREAD_ATTR_GETSTACKSIZE
-+  {
-+    size_t real_stack_size= 0;
-+    /* We must ignore real_stack_size = 0 as Solaris 2.9 can return 0 here */
-+    if (pthread_attr_getstacksize(attr, &real_stack_size) == 0 &&
-+	real_stack_size > guard_size)
-+    {
-+      real_stack_size -= guard_size;
-+      if (real_stack_size < stacksize)
-+      {
-+	if (global_system_variables.log_warnings)
-+	  sql_print_warning("Asked for %ld thread stack, but got %ld",
-+			    (long) stacksize, (long) real_stack_size);
-+	stacksize= real_stack_size;
-+      }
-+    }
-+  }
-+#endif
-+
-+#if defined(__ia64__) || defined(__ia64)
-+  stacksize /= 2;
-+#endif
-+  return stacksize;
-+}
-+
-+
- static void start_signal_handler(void)
- {
-   int error;
-@@ -2663,15 +2727,7 @@
- #if !defined(HAVE_DEC_3_2_THREADS)
-   pthread_attr_setscope(&thr_attr,PTHREAD_SCOPE_SYSTEM);
-   (void) pthread_attr_setdetachstate(&thr_attr,PTHREAD_CREATE_DETACHED);
--#if defined(__ia64__) || defined(__ia64)
--  /*
--    Peculiar things with ia64 platforms - it seems we only have half the
--    stack size in reality, so we have to double it here
--  */
--  pthread_attr_setstacksize(&thr_attr,my_thread_stack_size*2);
--#else
--  pthread_attr_setstacksize(&thr_attr,my_thread_stack_size);
--#endif
-+  (void) my_setstacksize(&thr_attr,my_thread_stack_size);
- #endif
- 
-   mysql_mutex_lock(&LOCK_thread_count);
-@@ -4445,37 +4501,7 @@
-     unireg_abort(1);				// Will do exit
-
-   init_signals();
--#if defined(__ia64__) || defined(__ia64)
--  /*
--    Peculiar things with ia64 platforms - it seems we only have half the
--    stack size in reality, so we have to double it here
--  */
--  pthread_attr_setstacksize(&connection_attrib,my_thread_stack_size*2);
--#else
--  pthread_attr_setstacksize(&connection_attrib,my_thread_stack_size);
--#endif
--#ifdef HAVE_PTHREAD_ATTR_GETSTACKSIZE
--  {
--    /* Retrieve used stack size;  Needed for checking stack overflows */
--    size_t stack_size= 0;
--    pthread_attr_getstacksize(&connection_attrib, &stack_size);
--#if defined(__ia64__) || defined(__ia64)
--    stack_size/= 2;
--#endif
--    /* We must check if stack_size = 0 as Solaris 2.9 can return 0 here */
--    if (stack_size && stack_size < my_thread_stack_size)
--    {
--      if (global_system_variables.log_warnings)
--	sql_print_warning("Asked for %lu thread stack, but got %ld",
--			  my_thread_stack_size, (long) stack_size);
--#if defined(__ia64__) || defined(__ia64)
--      my_thread_stack_size= stack_size*2;
--#else
--      my_thread_stack_size= stack_size;
--#endif
--    }
--  }
--#endif
-+  my_thread_stack_size = my_setstacksize(&connection_attrib,my_thread_stack_size);
- 
-   (void) thr_setconcurrency(concurrency);	// 10 by default
- 

packaging/rpm-uln/mysql-5.5-testing.patch

-Hack the top-level Makefile to enable the openssl regression tests.
-(Why doesn't this happen automatically given the configure option??)
-
-Also, increase the overall timeout for the regression tests to 12 hours,
-because on a slow or heavily-loaded build machine sometimes the default of
-5 hours isn't enough.  (This has been demonstrated to fail in mass-rebuild
-scenarios, which aren't that uncommon for Fedora.)  Similarly increase the
-per-testcase timeout to 30 minutes, since the default of 15 hasn't got a
-great deal of headroom either.
-
-
-diff -Naur mysql-5.1.32.orig/Makefile.am mysql-5.1.32/Makefile.am
---- mysql-5.1.32.orig/Makefile.am	2009-02-13 19:51:56.000000000 -0500
-+++ mysql-5.1.32/Makefile.am	2009-03-04 18:12:36.000000000 -0500
-@@ -98,7 +98,7 @@
- 
- test-ns:
- 	cd mysql-test ; \
--	    @PERL@ ./mysql-test-run.pl $(force) $(mem) --mysqld=--binlog-format=mixed
-+	    @PERL@ ./mysql-test-run.pl $(force) $(mem) --ssl --mysqld=--binlog-format=mixed --suite-timeout=720 --testcase-timeout=30
- 
- test-binlog-statement:
- 	cd mysql-test ; \

packaging/rpm-uln/mysql-chain-certs.patch

-Fix things so that chains of certificates work in the server and client
-certificate files.
-
-This only really works for OpenSSL-based builds, as yassl is unable to read
-multiple certificates from a file.  The patch below to yassl/src/ssl.cpp
-doesn't fix that, but just arranges that the viosslfactories.c patch won't
-have any ill effects in a yassl build.  Since we don't use yassl in Red Hat/
-Fedora builds, I'm not feeling motivated to try to fix yassl for this.
-
-See RH bug #598656.  Filed upstream at http://bugs.mysql.com/bug.php?id=54158
-
-   ===
-
-Joerg Bruehe, MySQL Build Team at Oracle: First patch adapted to code changes in MySQL 5.5
-
-
-diff -Naur mysql-5.5.29.orig/vio/viosslfactories.c mysql-5.5.29/vio/viosslfactories.c
---- mysql-5.5.29.orig/vio/viosslfactories.c	2010-05-06 11:28:07.000000000 -0400
-+++ mysql-5.5.29/vio/viosslfactories.c	2010-05-26 23:23:46.000000000 -0400
-@@ -106,7 +106,7 @@
-     key_file= cert_file;
- 
-   if (cert_file &&
--      SSL_CTX_use_certificate_file(ctx, cert_file, SSL_FILETYPE_PEM) <= 0)
-+      SSL_CTX_use_certificate_chain_file(ctx, cert_file) <= 0)
-   {
-     *error= SSL_INITERR_CERT;
-     DBUG_PRINT("error",("%s from file '%s'", sslGetErrString(*error), cert_file));
-diff -Naur mysql-5.1.47.orig/extra/yassl/src/ssl.cpp mysql-5.1.47/extra/yassl/src/ssl.cpp
---- mysql-5.1.47.orig/extra/yassl/src/ssl.cpp	2010-05-06 11:24:26.000000000 -0400
-+++ mysql-5.1.47/extra/yassl/src/ssl.cpp	2010-05-26 23:29:13.000000000 -0400
-@@ -1606,10 +1606,10 @@
-     }
- 
- 
--    int SSL_CTX_use_certificate_chain_file(SSL_CTX*, const char*)
-+    int SSL_CTX_use_certificate_chain_file(SSL_CTX* ctx, const char* file)
-     {
--        // TDOD:
--        return SSL_SUCCESS;
-+        // For the moment, treat like use_certificate_file
-+        return read_file(ctx, file, SSL_FILETYPE_PEM, Cert);
-     }
- 
- 

packaging/rpm-uln/mysql-embedded-check.c

-/* simple test program to see if we can link the embedded server library */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <stdarg.h>
-
-#include "mysql.h"
-
-MYSQL *mysql;
-
-static char *server_options[] = \
-       { "mysql_test", "--defaults-file=my.cnf", NULL };
-int num_elements = (sizeof(server_options) / sizeof(char *)) - 1;
-
-static char *server_groups[] = { "libmysqld_server", 
-                                 "libmysqld_client", NULL };
-
-int main(int argc, char **argv)
-{
-   mysql_library_init(num_elements, server_options, server_groups);
-   mysql = mysql_init(NULL);
-   mysql_close(mysql);
-   mysql_library_end();
-
-   return 0;
-}

packaging/rpm-uln/mysql-install-test.patch

-Improve the documentation that will be installed in the mysql-test RPM.
-
-
-diff -Naur mysql-5.1.43.orig/mysql-test/README mysql-5.1.43/mysql-test/README
---- mysql-5.1.43.orig/mysql-test/README	2010-01-15 12:14:43.000000000 -0500
-+++ mysql-5.1.43/mysql-test/README	2010-02-13 21:18:06.000000000 -0500
-@@ -6,6 +6,16 @@
- actually have a co-existing MySQL installation. The tests will not
- conflict with it.
- 
-+For use in Red Hat distributions, you should run the script as user mysql,
-+so the best bet is something like
-+	cd /usr/share/mysql-test
-+	sudo -u mysql ./mysql-test-run
-+This will use the installed mysql executables, but will run a private copy
-+of the server process (using data files within /usr/share/mysql-test),
-+so you need not start the mysqld service beforehand.
-+To clean up afterwards, remove the created "var" subdirectory, eg
-+	sudo -u mysql rm -rf /usr/share/mysql-test/var
-+
- All tests must pass. If one or more of them fail on your system, please
- read the following manual section for instructions on how to report the
- problem:
-@@ -25,7 +35,8 @@
- 
- With no test cases named on the command line, mysql-test-run falls back
- to the normal "non-extern" behavior. The reason for this is that some
--tests cannot run with an external server.
-+tests cannot run with an external server (because they need to control the
-+options with which the server is started).
- 
- 
- You can create your own test cases. To create a test case, create a new

packaging/rpm-uln/mysql-strmov.patch

-Remove overly optimistic definition of strmov() as stpcpy().
-
-mysql uses this macro with overlapping source and destination strings,
-which is verboten per spec, and fails on some Red Hat platforms.
-Deleting the definition is sufficient to make it fall back to a
-byte-at-a-time copy loop, which should consistently give the
-expected behavior.
-
-Note: the particular case that prompted this patch is reported and fixed
-at http://bugs.mysql.com/bug.php?id=48864.  However, my faith in upstream's
-ability to detect this type of error is low, and I also see little evidence
-of any real performance gain from optimizing these calls.  So I'm keeping
-this patch.
-
-
-diff -Naur mysql-5.1.37.orig/include/m_string.h mysql-5.1.37/include/m_string.h
---- mysql-5.1.37.orig/include/m_string.h	2009-07-13 19:08:50.000000000 -0400
-+++ mysql-5.1.37/include/m_string.h	2009-08-31 21:49:49.000000000 -0400
-@@ -81,13 +81,6 @@
- extern void *(*my_str_malloc)(size_t);
- extern void (*my_str_free)(void *);
- 
--#if defined(HAVE_STPCPY)
--#define strmov(A,B) stpcpy((A),(B))
--#ifndef stpcpy
--extern char *stpcpy(char *, const char *);	/* For AIX with gcc 2.95.3 */
--#endif
--#endif
--
- /* Declared in int2str() */
- extern char NEAR _dig_vec_upper[];
- extern char NEAR _dig_vec_lower[];

packaging/rpm-uln/mysql.init

-#!/bin/sh
-#
-# mysqld	This shell script takes care of starting and stopping
-#		the MySQL subsystem (mysqld).
-#
-# chkconfig: - 64 36
-# description:	MySQL database server.
-# processname: mysqld
-# config: /etc/my.cnf
-# pidfile: /var/run/mysqld/mysqld.pid
-
-# Source function library.
-. /etc/rc.d/init.d/functions
-
-# Source networking configuration.
-. /etc/sysconfig/network
-
-
-exec="/usr/bin/mysqld_safe"
-prog="mysqld"
-
-# Set timeouts here so they can be overridden from /etc/sysconfig/mysqld
-STARTTIMEOUT=120
-STOPTIMEOUT=60
-
-[ -e /etc/sysconfig/$prog ] && . /etc/sysconfig/$prog
-
-lockfile=/var/lock/subsys/$prog
-
-
-# extract value of a MySQL option from config files
-# Usage: get_mysql_option SECTION VARNAME DEFAULT
-# result is returned in $result
-# We use my_print_defaults which prints all options from multiple files,
-# with the more specific ones later; hence take the last match.
-get_mysql_option(){
-	result=`/usr/bin/my_print_defaults "$1" | sed -n "s/^--$2=//p" | tail -n 1`
-	if [ -z "$result" ]; then
-	    # not found, use default
-	    result="$3"
-	fi
-}
-
-get_mysql_option mysqld datadir "/var/lib/mysql"
-datadir="$result"
-get_mysql_option mysqld socket "$datadir/mysql.sock"
-socketfile="$result"
-get_mysql_option mysqld_safe log-error "/var/log/mysqld.log"
-errlogfile="$result"
-get_mysql_option mysqld_safe pid-file "/var/run/mysqld/mysqld.pid"
-mypidfile="$result"
-
-
-start(){
-    [ -x $exec ] || exit 5
-    # check to see if it's already running
-    RESPONSE=`/usr/bin/mysqladmin --socket="$socketfile" --user=UNKNOWN_MYSQL_USER ping 2>&1`
-    if [ $? = 0 ]; then
-	# already running, do nothing
-	action $"Starting $prog: " /bin/true
-	ret=0
-    elif echo "$RESPONSE" | grep -q "Access denied for user"
-    then
-	# already running, do nothing
-	action $"Starting $prog: " /bin/true
-	ret=0
-    else
-    	# prepare for start
-	touch "$errlogfile"
-	chown mysql:mysql "$errlogfile" 
-	chmod 0640 "$errlogfile"
-	[ -x /sbin/restorecon ] && /sbin/restorecon "$errlogfile"
-	if [ ! -d "$datadir/mysql" ] ; then
-	    # First, make sure $datadir is there with correct permissions
-	    if [ ! -e "$datadir" -a ! -h "$datadir" ]
-	    then
-		mkdir -p "$datadir" || exit 1
-	    fi
-	    chown mysql:mysql "$datadir"
-	    chmod 0755 "$datadir"
-	    [ -x /sbin/restorecon ] && /sbin/restorecon "$datadir"
-	    # Now create the database
-	    action $"Initializing MySQL database: " /usr/bin/mysql_install_db --datadir="$datadir" --user=mysql
-	    ret=$?
-	    chown -R mysql:mysql "$datadir"
-	    if [ $ret -ne 0 ] ; then
-		return $ret
-	    fi
-	fi
-	chown mysql:mysql "$datadir"
-	chmod 0755 "$datadir"
-	# Pass all the options determined above, to ensure consistent behavior.
-	# In many cases mysqld_safe would arrive at the same conclusions anyway
-	# but we need to be sure.  (An exception is that we don't force the
-	# log-error setting, since this script doesn't really depend on that,
-	# and some users might prefer to configure logging to syslog.)
-	# Note: set --basedir to prevent probes that might trigger SELinux
-	# alarms, per bug #547485
-	$exec   --datadir="$datadir" --socket="$socketfile" \
-		--pid-file="$mypidfile" \
-		--basedir=/usr --user=mysql >/dev/null 2>&1 &
-	safe_pid=$!
-	# Spin for a maximum of N seconds waiting for the server to come up;
-	# exit the loop immediately if mysqld_safe process disappears.
-	# Rather than assuming we know a valid username, accept an "access
-	# denied" response as meaning the server is functioning.
-	ret=0
-	TIMEOUT="$STARTTIMEOUT"
-	while [ $TIMEOUT -gt 0 ]; do
-	    RESPONSE=`/usr/bin/mysqladmin --socket="$socketfile" --user=UNKNOWN_MYSQL_USER ping 2>&1` && break
-	    echo "$RESPONSE" | grep -q "Access denied for user" && break
-	    if ! /bin/kill -0 $safe_pid 2>/dev/null; then
-		echo "MySQL Daemon failed to start."
-		ret=1
-		break
-	    fi
-	    sleep 1
-	    let TIMEOUT=${TIMEOUT}-1
-	done
-	if [ $TIMEOUT -eq 0 ]; then
-	    echo "Timeout error occurred trying to start MySQL Daemon."
-	    ret=1
-	fi
-	if [ $ret -eq 0 ]; then
-	    action $"Starting $prog: " /bin/true
-	    touch $lockfile
-	else
-	    action $"Starting $prog: " /bin/false
-	fi
-    fi
-    return $ret
-}
-
-stop(){
-	if [ ! -f "$mypidfile" ]; then
-	    # not running; per LSB standards this is "ok"
-	    action $"Stopping $prog: " /bin/true
-	    return 0
-	fi
-	MYSQLPID=`cat "$mypidfile"`
-	if [ -n "$MYSQLPID" ]; then
-	    /bin/kill "$MYSQLPID" >/dev/null 2>&1
-	    ret=$?
-	    if [ $ret -eq 0 ]; then
-		TIMEOUT="$STOPTIMEOUT"
-		while [ $TIMEOUT -gt 0 ]; do
-		    /bin/kill -0 "$MYSQLPID" >/dev/null 2>&1 || break
-		    sleep 1
-		    let TIMEOUT=${TIMEOUT}-1
-		done
-		if [ $TIMEOUT -eq 0 ]; then
-		    echo "Timeout error occurred trying to stop MySQL Daemon."
-		    ret=1
-		    action $"Stopping $prog: " /bin/false
-		else
-		    rm -f $lockfile
-		    rm -f "$socketfile"
-		    action $"Stopping $prog: " /bin/true
-		fi
-	    else
-		action $"Stopping $prog: " /bin/false
-	    fi
-	else
-	    # failed to read pidfile, probably insufficient permissions
-	    action $"Stopping $prog: " /bin/false
-	    ret=4
-	fi
-	return $ret
-}
- 
-restart(){
-    stop
-    start
-}
-
-condrestart(){
-    [ -e $lockfile ] && restart || :
-}
-
-
-# See how we were called.
-case "$1" in
-  start)
-    start
-    ;;
-  stop)
-    stop
-    ;;
-  status)
-    status -p "$mypidfile" $prog
-    ;;
-  restart)
-    restart
-    ;;
-  condrestart|try-restart)
-    condrestart
-    ;;
-  reload)
-    exit 3
-    ;;
-  force-reload)
-    restart
-    ;;
-  *)
-    echo $"Usage: $0 {start|stop|status|restart|condrestart|try-restart|reload|force-reload}"
-    exit 2
-esac
-
-exit $?

packaging/rpm-uln/scriptstub.c

-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-
-/* Translate call of myself into call of same-named script in LIBDIR */
-/* The macro LIBDIR must be defined as a double-quoted string */
-
-int main (int argc, char **argv)
-{
-  char *basename;
-  char *fullname;
-  char **newargs;
-  int i;
-
-  basename = strrchr(argv[0], '/');
-  if (basename)
-    basename++;
-  else
-    basename = argv[0];
-  fullname = malloc(strlen(LIBDIR) + strlen(basename) + 2);
-  sprintf(fullname, "%s/%s", LIBDIR, basename);
-  newargs = malloc((argc+1) * sizeof(char *));
-  newargs[0] = fullname;
-  for (i = 1; i < argc; i++)
-    newargs[i] = argv[i];
-  newargs[argc] = NULL;
-
-  execvp(fullname, newargs);
-
-  return 1;
-}