Manual merge from mysql-next-mr.

Conflicts:
  - sql/sql_yacc.yy

client/mysqlbinlog.cc

@@ -442,6 +442,7 @@ Exit_status Load_log_processor::process_first_event(const char *bname,
   {
     error("Could not construct local filename %s%s.",
           target_dir_name,bname);
+    my_free(fname, MYF(0));
     delete ce;
     DBUG_RETURN(ERROR_STOP);
   }
@@ -449,9 +450,15 @@ Exit_status Load_log_processor::process_first_event(const char *bname,
   rec.fname= fname;
   rec.event= ce;
 
+  /*
+     fname is freed in process_event()
+     after Execute_load_query_log_event or Execute_load_log_event
+     will have been processed, otherwise in Load_log_processor::destroy()
+  */
   if (set_dynamic(&file_names, (uchar*)&rec, file_id))
   {
     error("Out of memory.");
+    my_free(fname, MYF(0));
     delete ce;
     DBUG_RETURN(ERROR_STOP);
   }
@@ -831,7 +838,17 @@ Exit_status process_event(PRINT_EVENT_INFO *print_event_info, Log_event *ev,
       print_event_info->common_header_len=
         glob_description_event->common_header_len;
       ev->print(result_file, print_event_info);
-      ev->temp_buf= 0; // as the event ref is zeroed
+      if (!remote_opt)
+      {
+        ev->free_temp_buf(); // free memory allocated in dump_local_log_entries
+      }
+      else
+      {
+        /*
+          disassociate but not free dump_remote_log_entries time memory
+        */
+        ev->temp_buf= 0;
+      }
       /*
         We don't want this event to be deleted now, so let's hide it (I
         (Guilhem) should later see if this triggers a non-serious Valgrind

mysql-test/collections/default.experimental

@@ -81,4 +81,3 @@ parts.partition_syntax_ndb
 parts.partition_alter1_1_2_ndb
 parts.partition_basic_ndb
 parts.partition_mgm_lc0_ndb
-

mysql-test/extra/rpl_tests/rpl_insert_id.test

@@ -180,7 +180,9 @@ begin
 end|
 delimiter ;|
 
+--disable_warnings
 insert into t1 (last_id) values (0);
+--enable_warnings
 
 drop trigger t1_bi;
 
@@ -513,7 +515,9 @@ set sql_log_bin=0;
 insert into t2 (id) values(5),(6),(7);
 delete from t2 where id>=5;
 set sql_log_bin=1;
+--disable_warnings
 insert into t1 select insid();
+--enable_warnings
 select * from t1 order by id;
 select * from t2 order by id;
 

mysql-test/extra/rpl_tests/rpl_reset_slave.test

@@ -22,6 +22,7 @@ source include/show_slave_status2.inc;
 reset slave;
 source include/show_slave_status2.inc;
 
+change master to master_user='root';
 start slave;
 sync_with_master;
 source include/show_slave_status2.inc;

mysql-test/extra/rpl_tests/rpl_row_blob.test

@@ -36,7 +36,7 @@ SELECT LENGTH(data) FROM test.t1 WHERE c1 = 3;
 save_master_pos;
 connection slave;
 sync_with_master; 
-sleep 5;
+--source include/wait_for_ndb_to_binlog.inc
 --echo
 --echo **** Data Insert Validation Slave Section test.t1 ****
 --echo
@@ -56,12 +56,10 @@ UPDATE t1 set data=repeat('c',17*1024) where c1 = 2;
 --echo
 SELECT LENGTH(data) FROM test.t1 WHERE c1 = 1;
 SELECT LENGTH(data) FROM test.t1 WHERE c1 = 2;
-# Sleep is needed for NDB to allow time for
-# Injector thread to populate the bin log.
 save_master_pos;
 connection slave;
 sync_with_master; 
-sleep 5;
+--source include/wait_for_ndb_to_binlog.inc
 --echo
 --echo **** Data Update Validation Slave Section test.t1 ****
 --echo
@@ -132,7 +130,7 @@ FROM test.t2 WHERE c1=2;
 save_master_pos;
 connection slave;
 sync_with_master; 
-sleep 5;
+--source include/wait_for_ndb_to_binlog.inc
 --echo
 --echo **** Data Insert Validation Slave Section test.t2 ****
 --echo
@@ -155,12 +153,10 @@ SELECT c1, LENGTH(c2), SUBSTR(c2,1+2*900,2), LENGTH(c4), SUBSTR(c4,1+3*900,3)
 FROM test.t2 WHERE c1=1;
 SELECT c1, LENGTH(c2), SUBSTR(c2,1+2*900,2), LENGTH(c4), SUBSTR(c4,1+3*900,3)
 FROM test.t2 WHERE c1=2;
-# Sleep is needed for NDB to allow time for
-# Injector thread to populate the bin log.
 save_master_pos;
 connection slave;
 sync_with_master; 
-sleep 5;
+--source include/wait_for_ndb_to_binlog.inc
 --echo
 --echo **** Data Update Validation Slave Section test.t2 ****
 --echo

mysql-test/extra/rpl_tests/rpl_row_func003.test

@@ -3,10 +3,7 @@
 # Original Date: Aug/15/2005                                                #
 # Update: 08/29/2005 Comment out sleep. Only needed for debugging           #
 #############################################################################
-# Note: Many lines are commented out in this test case. These were used for #
-#       creating the test case and debugging and are being left for         #
-#       debugging, but they can not be used for the regular testing as the  #
-#       Time changes and is not deteministic, so instead we dump both the   #
+# Note: Time changes and is not deteministic, so instead we dump both the   #
 #       master and slave and diff the dumps. If the dumps differ then the   #
 #       test case will fail. To run during diff failuers, comment out the   #
 #       diff.                                                               #
@@ -26,7 +23,6 @@ DROP TABLE IF EXISTS test.t1;
 
 --enable_warnings
 
-
 eval CREATE TABLE test.t1 (a INT NOT NULL AUTO_INCREMENT, c CHAR(16),PRIMARY KEY(a))ENGINE=$engine_type;
 
 delimiter |;
@@ -44,33 +40,24 @@ END|
 delimiter ;|
 
 INSERT INTO test.t1 VALUES (null,test.f1()),(null,test.f1()),(null,test.f1());
-sleep 6;
 INSERT INTO test.t1 VALUES (null,test.f1()),(null,test.f1()),(null,test.f1());
-sleep 6;
-
-#Select in this test are used for debugging
-#select * from test.t1;
-#connection slave;
-#select * from test.t1;
 
-connection master;
 SET AUTOCOMMIT=0;
 START TRANSACTION;
 INSERT INTO test.t1 VALUES (null,test.f1());
 ROLLBACK;
 SET AUTOCOMMIT=1;
-#select * from test.t1;
-#sleep 6;
-
-#connection slave;
-#select * from test.t1;
-
-#connection master;
 
-#used for debugging
-#show binlog events;
+# Sync master and slave for all engines except NDB
+if (`SELECT UPPER(LEFT('$engine_type', 3)) != 'NDB'`) {
+  sync_slave_with_master;
+  connection master;
+}
+# Sync master and slave for NDB engine
+let $wait_time= 6;
+--source include/wait_for_ndb_to_binlog.inc
 
-# time to dump the databases and so we can see if they match
+# Time to dump the databases and so we can see if they match
 
 --exec $MYSQL_DUMP --compact --order-by-primary --skip-extended-insert --no-create-info test > $MYSQLTEST_VARDIR/tmp/func003_master.sql
 --exec $MYSQL_DUMP_SLAVE --compact --order-by-primary --skip-extended-insert --no-create-info test > $MYSQLTEST_VARDIR/tmp/func003_slave.sql
@@ -87,5 +74,8 @@ DROP TABLE test.t1;
 
 diff_files $MYSQLTEST_VARDIR/tmp/func003_master.sql $MYSQLTEST_VARDIR/tmp/func003_slave.sql;
 
+# Clean up
+remove_file $MYSQLTEST_VARDIR/tmp/func003_master.sql;
+remove_file $MYSQLTEST_VARDIR/tmp/func003_slave.sql;
 
 # End of 5.0 test case

mysql-test/extra/rpl_tests/rpl_row_sp003.test

@@ -41,10 +41,7 @@ CALL test.p2();
 SELECT release_lock("test");
 SELECT * FROM test.t1; 
 #show binlog events;
-# Added sleep for use with NDB to ensure that
-# the injector thread will populate log before
-# we switch to the slave.
-sleep 5;
+--source include/wait_for_ndb_to_binlog.inc
 sync_slave_with_master;
 connection slave;
 SELECT * FROM test.t1;

mysql-test/extra/rpl_tests/rpl_stm_000001.test

@@ -68,8 +68,8 @@ enable_query_log;
 connection slave;
 lock tables t1 read;
 start slave;
-#hope this is long enough for I/O thread to fetch over 16K relay log data
-sleep 3;
+connection master;
+--source include/sync_slave_io_with_master.inc
 unlock tables;
 
 #test handling of aborted connection in the middle of update

mysql-test/extra/rpl_tests/rpl_trig004.test

@@ -35,9 +35,8 @@ INSERT INTO test.t2 VALUES (1, 0.0);
 #show binlog events; 
 select * from test.t1;
 select * from test.t2;
-# Have to sleep for a few seconds to allow 
-# NDB injector thread to populate binlog
-sleep 10;
+let $wait_time= 10;
+--source include/wait_for_ndb_to_binlog.inc
 sync_slave_with_master;
 connection slave;
 select * from test.t1;

mysql-test/include/master-slave-reset.inc

@@ -6,12 +6,29 @@
 # Since we expect STOP SLAVE to produce a warning as the slave is
 # stopped (the server was started with skip-slave-start), we disable
 # warnings when doing STOP SLAVE.
+#
+# $no_change_master  If true, no change master will be done nor any reset slave.
+#                    This is to avoid touching the relay-log.info file allowing
+#                    the test to create one itself.
+# $skip_slave_start  If true, the slave will not be started
 
 connection slave;
+
+#we expect STOP SLAVE to produce a warning as the slave is stopped
+#(the server was started with skip-slave-start)
 --disable_warnings
 stop slave;
+--disable_query_log
+if (!$no_change_master) {
+  eval CHANGE MASTER TO MASTER_USER='root',
+                        MASTER_CONNECT_RETRY=1,
+                        MASTER_HOST='127.0.0.1',
+                        MASTER_PORT=$MASTER_MYPORT;
+}
+--enable_query_log
 source include/wait_for_slave_to_stop.inc;
 --enable_warnings
+
 connection master;
 --disable_warnings
 --disable_query_log
@@ -20,17 +37,39 @@ use test;
 drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 --enable_warnings
 reset master;
+
 --disable_query_log
-reset slave;
+if (!$no_change_master) {
+  reset slave;
+}
 --enable_query_log
 connection slave;
-reset slave;
+
+--disable_warnings
+# the first RESET SLAVE may produce a warning about non-existent
+# 'ndb_apply_status' table, because this table is created
+# asynchronously at the server startup and may not exist yet
+# if RESET SLAVE comes too soon after the server startup
+if (!$no_change_master) {
+  reset slave;
+}
+--enable_warnings
+
 # Clean up old test tables
 --disable_warnings
 drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 --enable_warnings
+
 --disable_query_log
+#eval CHANGE MASTER TO MASTER_USER='root',
+#                      MASTER_CONNECT_RETRY=1,
+#                      MASTER_HOST='127.0.0.1',
+#                      MASTER_PORT=$MASTER_MYPORT;
 reset master;
 --enable_query_log
-start slave;
-source include/wait_for_slave_to_start.inc;
+
+if (!$skip_slave_start) {
+  start slave;
+  source include/wait_for_slave_to_start.inc;
+}
+

mysql-test/include/master-slave.inc

 # Replication tests need binlog
+#
+# $skip_slave_start  If true, the slave will not be started
 source include/have_log_bin.inc;
 
 connect (master,127.0.0.1,root,,test,$MASTER_MYPORT,);
@@ -8,7 +10,10 @@ connect (slave1,127.0.0.1,root,,test,$SLAVE_MYPORT,);
 
 -- source include/master-slave-reset.inc
 
-connection master;
-sync_slave_with_master;
+if (!$skip_slave_start) {
+  connection master;
+  sync_slave_with_master;
+}
+
 # Set the default connection to 'master'
 connection master;

mysql-test/include/not_ndb_default.inc

 --require r/not_ndb_default.require
 disable_query_log;
-select convert(@@table_type using latin1) NOT IN ("ndbcluster","NDBCLUSTER") as "TRUE";
+select convert(@@storage_engine using latin1) NOT IN ("ndbcluster","NDBCLUSTER") as "TRUE";
 enable_query_log;

mysql-test/include/wait_for_ndb_to_binlog.inc

+# ==== Purpose ====
+# 
+#   Several test primitives from mysql-test/extra/rpl_tests 
+# shared for test cases for MyISAM, InnoDB, NDB and other 
+# engines. But for NDB all events will be added by NDB 
+# injector and now there are no way to detect the state of 
+# NDB injector therefore this primitive waits 5 sec 
+# if engine type is NDB. 
+#   In future that should be fixed by waiting of proper 
+# state of NDB injector. 
+#
+# ==== Usage ====
+#
+# let $engine_type= NDB;
+# --source include/wait_for_ndb_to_binlog.inc
+#
+# ==== Parameters =====
+#
+# $engine_type
+#   Type of engine. If type is NDB then it waits $wait_time sec 
+#   
+# $wait_time
+#   Test will wait $wait_time seconds
+
+let $_wait_time= 5;
+
+if (!$wait_time) {
+  let $_wait_time= $wait_time;
+}
+
+if (`SELECT UPPER(LEFT('$engine_type',3)) = 'NDB'`) {
+  while (!$_wait_time) {
+    let $_wait_time_internal= 10;
+    while (!$_wait_time_internal) {
+      sleep 0.1;
+      dec $_wait_time_internal;
+    }
+    dec $_wait_time;
+  }
+}
+

mysql-test/include/wait_show_condition.inc

@@ -2,13 +2,16 @@
 #
 # SUMMARY
 #
-#    Waits until the show statement ($show_statement) has at least within one of
-#    the rows of the result set for the field ($field) a value which fulfils
+#    Waits until the show statement ($show_statement) has one or all of the
+#    rows of the result set for the field ($field) a value which fulfils
 #    a condition ($condition), or the operation times out.
 #    
 #
 # USAGE
 #
+#    All rows of the result must fulfil the condition if $all_rows_fulfil is 1
+#    else at least one of the result must fulfil the condition.
+#    let $wait_for_all= 1; 
 #    let $show_statement= SHOW PROCESSLIST;
 #    let $field= State;
 #    let $condition= = 'Updating';
@@ -46,27 +49,56 @@ inc $max_run_time;
 
 let $found= 0;
 let $max_end_time= `SELECT UNIX_TIMESTAMP() + $max_run_time`;
-while (`SELECT UNIX_TIMESTAMP() <= $max_end_time AND $found = 0`)
+
+if (`SELECT '$wait_for_all' != '1'`)
 {
-   # Sleep a bit to avoid too heavy load.
-   real_sleep 0.2;
-   let $rowno= 1;
-   let $process_result= 1;
-   while (`SELECT $process_result = 1 AND $found = 0`)
-   {
-      let $field_value= query_get_value($show_statement, $field, $rowno);
-      if (`SELECT '$field_value' $condition`)
-      {
-         let $found= 1;
-      }
-      if (`SELECT '$field_value' = 'No such row'`)
-      {
-         # We are behind the last row of the result set.
-         let $process_result= 0;
-      }
-      inc $rowno;
-   }
+  while (`SELECT UNIX_TIMESTAMP() <= $max_end_time AND $found = 0`)
+  {
+     # Sleep a bit to avoid too heavy load.
+     real_sleep 0.2;
+     let $rowno= 1;
+     let $process_result= 1;
+     while (`SELECT $process_result = 1 AND $found = 0`)
+     {
+        let $field_value= query_get_value($show_statement, $field, $rowno);
+        if (`SELECT '$field_value' $condition`)
+        {
+           let $found= 1;
+        }
+        if (`SELECT '$field_value' = 'No such row'`)
+        {
+           # We are behind the last row of the result set.
+           let $process_result= 0;
+        }
+        inc $rowno;
+     }
+  }
 }
+
+if (`SELECT '$wait_for_all' = '1'`)
+{
+  while (`SELECT UNIX_TIMESTAMP() <= $max_end_time AND $found = 0`)
+  {
+     # Sleep a bit to avoid too heavy load.
+     real_sleep 0.2;
+     let $rowno= 1;
+     let $process_result= 1;
+     while (`SELECT $process_result = 1 AND $found = 0`)
+     {
+        let $field_value= query_get_value($show_statement, $field, $rowno);
+        if (`SELECT '$field_value' = 'No such row'`)
+        {
+           let $found= 1;
+        }
+        if (`SELECT $found = 0 AND NOT '$field_value' $condition`)
+        {
+           let process_result= 0;
+        }
+        inc $rowno;
+     }
+  }
+}
+
 if (!$found)
 {
   echo # Timeout in include/wait_show_condition.inc for $wait_condition;

mysql-test/lib/v1/mysql-test-run.pl

@@ -4024,15 +4024,26 @@ sub mysqld_arguments ($$$$) {
     }
     else
     {
-      if ($mysql_version_id < 50200)
-      {
-        mtr_add_arg($args, "%s--master-user=root", $prefix);
-        mtr_add_arg($args, "%s--master-connect-retry=1", $prefix);
-        mtr_add_arg($args, "%s--master-host=127.0.0.1", $prefix);
-        mtr_add_arg($args, "%s--master-password=", $prefix);
-        mtr_add_arg($args, "%s--master-port=%d", $prefix,
-    	            $master->[0]->{'port'}); # First master
-      }
+#      NOTE: the backport (see BUG#48048) originally removed the
+#            commented out lines below. However, given that they are
+#            protected with a version check (< 50200) now, it should be 
+#            safe to keep them. The problem is that the backported patch 
+#            was into a 5.1 GA codebase - mysql-5.1-rep+2 tree - so 
+#            version is 501XX, consequently check becomes worthless. It 
+#            should be safe to uncomment them when merging up to 5.5.
+#
+#            RQG semisync test runs on the 5.1 GA tree and needs MTR v1.
+#            This was causing the test to fail (slave would not start
+#            due to unrecognized option(s)).
+#      if ($mysql_version_id < 50200)
+#      {
+#        mtr_add_arg($args, "%s--master-user=root", $prefix);
+#        mtr_add_arg($args, "%s--master-connect-retry=1", $prefix);
+#        mtr_add_arg($args, "%s--master-host=127.0.0.1", $prefix);
+#        mtr_add_arg($args, "%s--master-password=", $prefix);
+#        mtr_add_arg($args, "%s--master-port=%d", $prefix,
+#    	            $master->[0]->{'port'}); # First master
+#      }
       my $slave_server_id=  2 + $idx;
       my $slave_rpl_rank= $slave_server_id;
       mtr_add_arg($args, "%s--server-id=%d", $prefix, $slave_server_id);

mysql-test/mysql-test-run.pl

@@ -68,7 +68,7 @@ use My::File::Path; # Patched version of File::Path
 use File::Basename;
 use File::Copy;
 use File::Find;
-use File::Temp qw / tempdir /;
+use File::Temp qw /tempdir/;
 use File::Spec::Functions qw / splitdir /;
 use My::Platform;
 use My::SafeProcess;

mysql-test/r/deprecated_features.result

+set global log_bin_trust_routine_creators=1;
+ERROR HY000: Unknown system variable 'log_bin_trust_routine_creators'
+set table_type='MyISAM';
+ERROR HY000: Unknown system variable 'table_type'
+select @@table_type='MyISAM';
+ERROR HY000: Unknown system variable 'table_type'
+backup table t1 to 'data.txt';
+ERROR 42000: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'backup table t1 to 'data.txt'' at line 1
+restore table t1 from 'data.txt';
+ERROR 42000: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'restore table t1 from 'data.txt'' at line 1
+show plugin;
+ERROR 42000: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'plugin' at line 1
+load table t1 from master;
+ERROR 42000: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'table t1 from master' at line 1
+load data from master;
+ERROR 42000: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'from master' at line 1
+SHOW INNODB STATUS;
+ERROR 42000: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'INNODB STATUS' at line 1
+create table t1 (t6 timestamp(6));
+ERROR 42000: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '(6))' at line 1
+create table t1 (t6 timestamp) type=myisam;
+ERROR 42000: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'type=myisam' at line 1
+show table types;
+ERROR 42000: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'types' at line 1
+show mutex status;
+ERROR 42000: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'mutex status' at line 1

mysql-test/r/flush2.result

@@ -4,11 +4,9 @@ show variables like 'log_bin%';
 Variable_name	Value
 log_bin	OFF
 log_bin_trust_function_creators	ON
-log_bin_trust_routine_creators	ON
 flush logs;
 show variables like 'log_bin%';
 Variable_name	Value
 log_bin	OFF
 log_bin_trust_function_creators	ON
-log_bin_trust_routine_creators	ON
 set global expire_logs_days = 0;

mysql-test/r/ps_1general.result

@@ -412,8 +412,6 @@ prepare stmt1 from ' optimize table t1 ' ;
 prepare stmt1 from ' analyze table t1 ' ;
 prepare stmt1 from ' checksum table t1 ' ;
 prepare stmt1 from ' repair table t1 ' ;
-prepare stmt1 from ' restore table t1 from ''<MYSQLTEST_VARDIR>/tmp/data.txt'' ' ;
-ERROR HY000: This command is not supported in the prepared statement protocol yet
 prepare stmt1 from ' handler t1 open ';
 ERROR HY000: This command is not supported in the prepared statement protocol yet
 prepare stmt3 from ' commit ' ;

mysql-test/r/show_check.result

@@ -808,7 +808,6 @@ show plugins;
 show columns in t1;
 show slave hosts;
 show keys in t1;
-show table types;
 show storage engines;
 show authors;
 show contributors;
@@ -1291,11 +1290,6 @@ delete from mysql.db where user='mysqltest_4';
 delete from mysql.tables_priv where user='mysqltest_4';
 flush privileges;
 drop database mysqltest;
-show full plugin;
-show warnings;
-Level	Code	Message
-Warning	1287	The syntax 'SHOW PLUGIN' is deprecated and will be removed in MySQL 6.0. Please use 'SHOW PLUGINS' instead
-show plugin;
 show plugins;
 create database `mysqlttest\1`;
 create table `mysqlttest\1`.`a\b` (a int);
@@ -1447,7 +1441,6 @@ DROP PROCEDURE p1;
 DROP FUNCTION f1;
 DROP TABLE t1;
 DROP EVENT ev1;
-SHOW TABLE TYPES;
 CREATE USER test_u@localhost;
 GRANT PROCESS ON *.* TO test_u@localhost;
 SHOW ENGINE MYISAM MUTEX;

mysql-test/r/signal_code.result

@@ -20,16 +20,16 @@ return 0;
 end $$
 show procedure code signal_proc;
 Pos	Instruction
-0	stmt 135 "SIGNAL foo"
-1	stmt 135 "SIGNAL foo SET MESSAGE_TEXT = "This i..."
-2	stmt 136 "RESIGNAL foo"
-3	stmt 136 "RESIGNAL foo SET MESSAGE_TEXT = "This..."
+0	stmt 131 "SIGNAL foo"
+1	stmt 131 "SIGNAL foo SET MESSAGE_TEXT = "This i..."
+2	stmt 132 "RESIGNAL foo"
+3	stmt 132 "RESIGNAL foo SET MESSAGE_TEXT = "This..."
 drop procedure signal_proc;
 show function code signal_func;
 Pos	Instruction
-0	stmt 135 "SIGNAL foo"
-1	stmt 135 "SIGNAL foo SET MESSAGE_TEXT = "This i..."
-2	stmt 136 "RESIGNAL foo"
-3	stmt 136 "RESIGNAL foo SET MESSAGE_TEXT = "This..."
+0	stmt 131 "SIGNAL foo"
+1	stmt 131 "SIGNAL foo SET MESSAGE_TEXT = "This i..."
+2	stmt 132 "RESIGNAL foo"
+3	stmt 132 "RESIGNAL foo SET MESSAGE_TEXT = "This..."
 4	freturn 3 0
 drop function signal_func;

mysql-test/r/sp-code.result

@@ -155,11 +155,11 @@ Pos	Instruction
 0	stmt 9 "drop temporary table if exists sudoku..."
 1	stmt 1 "create temporary table sudoku_work ( ..."
 2	stmt 1 "create temporary table sudoku_schedul..."
-3	stmt 93 "call sudoku_init()"
+3	stmt 89 "call sudoku_init()"
 4	jump_if_not 7(8) p_naive@0
 5	stmt 4 "update sudoku_work set cnt = 0 where ..."
 6	jump 8
-7	stmt 93 "call sudoku_count()"
+7	stmt 89 "call sudoku_count()"
 8	stmt 6 "insert into sudoku_schedule (row,col)..."
 9	set v_scounter@2 0
 10	set v_i@3 1

mysql-test/r/sp-error.result

@@ -921,10 +921,6 @@ CREATE TRIGGER tr1 BEFORE INSERT ON t1 FOR EACH ROW BEGIN DROP TRIGGER test1; EN
 ERROR HY000: Explicit or implicit commit is not allowed in stored function or trigger.
 CREATE FUNCTION bug_13627_f() returns int BEGIN DROP TRIGGER test1; return 1; END |
 ERROR HY000: Explicit or implicit commit is not allowed in stored function or trigger.
-CREATE TRIGGER tr1 BEFORE INSERT ON t1 FOR EACH ROW BEGIN load table t1 from master; END |
-ERROR 0A000: LOAD TABLE is not allowed in stored procedures
-CREATE FUNCTION bug_13627_f() returns int BEGIN load table t1 from master; return 1; END |
-ERROR 0A000: LOAD TABLE is not allowed in stored procedures
 CREATE TRIGGER tr1 BEFORE INSERT ON t1 FOR EACH ROW BEGIN create table t2 (a int); END |
 ERROR HY000: Explicit or implicit commit is not allowed in stored function or trigger.
 CREATE FUNCTION bug_13627_f() returns int BEGIN create table t2 (a int); return 1; END |
@@ -1115,18 +1111,6 @@ REPAIR TABLE t1;
 RETURN 1;
 END|
 ERROR 0A000: Not allowed to return a result set from a function
-CREATE FUNCTION bug13012() RETURNS INT
-BEGIN
-BACKUP TABLE t1 TO '/tmp';
-RETURN 1;
-END|
-ERROR 0A000: Not allowed to return a result set from a function
-CREATE FUNCTION bug13012() RETURNS INT
-BEGIN
-RESTORE TABLE t1 FROM '/tmp';
-RETURN 1;
-END|
-ERROR 0A000: Not allowed to return a result set from a function
 create table t1 (a int)|
 CREATE PROCEDURE bug13012_1() REPAIR TABLE t1|
 CREATE FUNCTION bug13012_2() RETURNS INT
@@ -1639,11 +1623,9 @@ DROP TABLE t1|
 drop procedure if exists p1;
 create procedure p1()
 begin
-create table t1 (a int) type=MyISAM;
+create table t1 (a int) engine=MyISAM;
 drop table t1;
 end|
-Warnings:
-Warning	1287	The syntax 'TYPE=storage_engine' is deprecated and will be removed in MySQL 6.0. Please use 'ENGINE=storage_engine' instead
 call p1();
 call p1();
 drop procedure p1;

mysql-test/r/sp.result

@@ -4305,19 +4305,10 @@ drop procedure if exists bug13012|
 create procedure bug13012()
 BEGIN
 REPAIR TABLE t1;
-BACKUP TABLE t1 to '<MYSQLTEST_VARDIR>/tmp/';
-DROP TABLE t1;
-RESTORE TABLE t1 FROM '<MYSQLTEST_VARDIR>/tmp/';
 END|
 call bug13012()|
 Table	Op	Msg_type	Msg_text
 test.t1	repair	status	OK
-Table	Op	Msg_type	Msg_text
-test.t1	backup	Warning	The syntax 'BACKUP TABLE' is deprecated and will be removed in MySQL 6.0. Please use MySQL Administrator (mysqldump, mysql) instead
-test.t1	backup	status	OK
-Table	Op	Msg_type	Msg_text
-test.t1	restore	Warning	The syntax 'RESTORE TABLE' is deprecated and will be removed in MySQL 6.0. Please use MySQL Administrator (mysqldump, mysql) instead
-test.t1	restore	status	OK
 drop procedure bug13012|
 create view v1 as select * from t1|
 create procedure bug13012()

mysql-test/r/sp_trans.result

@@ -533,9 +533,7 @@ set @@session.max_heap_table_size=default|
 CREATE DATABASE db_bug7787|
 use db_bug7787|
 CREATE PROCEDURE p1()
-SHOW INNODB STATUS; |
-Warnings:
-Warning	1287	The syntax 'SHOW INNODB STATUS' is deprecated and will be removed in MySQL 6.0. Please use 'SHOW ENGINE INNODB STATUS' instead
+SHOW ENGINE INNODB STATUS; |
 GRANT EXECUTE ON PROCEDURE p1 TO user_bug7787@localhost|
 DROP DATABASE db_bug7787|
 drop user user_bug7787@localhost|

mysql-test/r/type_blob.result

@@ -889,28 +889,12 @@ CREATE TABLE b15776 (a year(0));
 DROP TABLE b15776;
 CREATE TABLE b15776 (a year(-2));
 ERROR 42000: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '-2))' at line 1
-CREATE TABLE b15776 (a timestamp(4294967294));
-Warnings:
-Warning	1287	The syntax 'TIMESTAMP(4294967294)' is deprecated and will be removed in MySQL 6.0. Please use 'TIMESTAMP' instead
-DROP TABLE b15776;
-CREATE TABLE b15776 (a timestamp(4294967295));
-Warnings:
-Warning	1287	The syntax 'TIMESTAMP(4294967295)' is deprecated and will be removed in MySQL 6.0. Please use 'TIMESTAMP' instead
-DROP TABLE b15776;
-CREATE TABLE b15776 (a timestamp(4294967296));
-ERROR 42000: Display width out of range for column 'a' (max = 4294967295)
-CREATE TABLE b15776 (a timestamp(-1));
-ERROR 42000: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '-1))' at line 1
-CREATE TABLE b15776 (a timestamp(-2));
-ERROR 42000: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '-2))' at line 1
 CREATE TABLE b15776 (a int(999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999));
 ERROR 42000: Display width out of range for column 'a' (max = 4294967295)
 CREATE TABLE b15776 (a char(999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999));
 ERROR 42000: Display width out of range for column 'a' (max = 4294967295)
 CREATE TABLE b15776 (a year(999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999));
 ERROR 42000: Display width out of range for column 'a' (max = 4294967295)
-CREATE TABLE b15776 (a timestamp(999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999));
-ERROR 42000: Display width out of range for column 'a' (max = 4294967295)
 CREATE TABLE b15776 select cast(null as char(4294967295));
 show columns from b15776;
 Field	Type	Null	Key	Default	Extra

mysql-test/r/type_timestamp.result

@@ -97,30 +97,6 @@ date	date_time	time_stamp
 2005-01-01	2005-01-01 00:00:00	2005-01-01 00:00:00
 2030-01-01	2030-01-01 00:00:00	2030-01-01 00:00:00
 drop table t1;
-create table t1 (t2 timestamp(2), t4 timestamp(4), t6 timestamp(6),
-t8 timestamp(8), t10 timestamp(10), t12 timestamp(12),
-t14 timestamp(14));
-Warnings:
-Warning	1287	The syntax 'TIMESTAMP(2)' is deprecated and will be removed in MySQL 6.0. Please use 'TIMESTAMP' instead
-Warning	1287	The syntax 'TIMESTAMP(4)' is deprecated and will be removed in MySQL 6.0. Please use 'TIMESTAMP' instead
-Warning	1287	The syntax 'TIMESTAMP(6)' is deprecated and will be removed in MySQL 6.0. Please use 'TIMESTAMP' instead
-Warning	1287	The syntax 'TIMESTAMP(8)' is deprecated and will be removed in MySQL 6.0. Please use 'TIMESTAMP' instead
-Warning	1287	The syntax 'TIMESTAMP(10)' is deprecated and will be removed in MySQL 6.0. Please use 'TIMESTAMP' instead
-Warning	1287	The syntax 'TIMESTAMP(12)' is deprecated and will be removed in MySQL 6.0. Please use 'TIMESTAMP' instead
-Warning	1287	The syntax 'TIMESTAMP(14)' is deprecated and will be removed in MySQL 6.0. Please use 'TIMESTAMP' instead
-insert t1 values (0,0,0,0,0,0,0),
-("1997-12-31 23:47:59", "1997-12-31 23:47:59", "1997-12-31 23:47:59",
-"1997-12-31 23:47:59", "1997-12-31 23:47:59", "1997-12-31 23:47:59",
-"1997-12-31 23:47:59");
-select * from t1;
-t2	t4	t6	t8	t10	t12	t14
-0000-00-00 00:00:00	0000-00-00 00:00:00	0000-00-00 00:00:00	0000-00-00 00:00:00	0000-00-00 00:00:00	0000-00-00 00:00:00	0000-00-00 00:00:00
-1997-12-31 23:47:59	1997-12-31 23:47:59	1997-12-31 23:47:59	1997-12-31 23:47:59	1997-12-31 23:47:59	1997-12-31 23:47:59	1997-12-31 23:47:59
-select * from t1;
-t2	t4	t6	t8	t10	t12	t14
-0000-00-00 00:00:00	0000-00-00 00:00:00	0000-00-00 00:00:00	0000-00-00 00:00:00	0000-00-00 00:00:00	0000-00-00 00:00:00	0000-00-00 00:00:00
-1997-12-31 23:47:59	1997-12-31 23:47:59	1997-12-31 23:47:59	1997-12-31 23:47:59	1997-12-31 23:47:59	1997-12-31 23:47:59	1997-12-31 23:47:59
-drop table t1;
 create table t1 (ix timestamp);
 insert into t1 values (0),(20030101010160),(20030101016001),(20030101240101),(20030132010101),(20031301010101),(20031200000000),(20030000000000);
 Warnings:
@@ -436,7 +412,7 @@ max(t)
 2004-02-01 00:00:00
 drop table t1;
 set sql_mode='maxdb';
-create table t1 (a timestamp, b timestamp(19));
+create table t1 (a timestamp, b timestamp);
 show create table t1;
 Table	Create Table
 t1	CREATE TABLE "t1" (

mysql-test/r/warnings.result

@@ -166,9 +166,6 @@ show variables like 'max_error_count';
 Variable_name	Value
 max_error_count	10
 drop table t1;
-set table_type=MYISAM;
-Warnings:
-Warning	1287	The syntax '@@table_type' is deprecated and will be removed in MySQL 6.0. Please use '@@storage_engine' instead
 create table t1 (a int);
 insert into t1 (a) values (1), (2), (3), (4), (5), (6), (7), (8), (9), (10);
 update t1 set a='abc';

mysql-test/suite/binlog/r/binlog_max_extension.result

+call mtr.add_suppression("Next log extension: 2147483647. Remaining log filename extensions: 0.");
+call mtr.add_suppression("Log filename extension number exhausted:");
+call mtr.add_suppression("Can't generate a unique log-filename");
+RESET MASTER;
+FLUSH LOGS;
+Warnings:
+Warning	1098	Can't generate a unique log-filename master-bin.(1-999)
+

mysql-test/suite/binlog/r/binlog_stm_mix_innodb_myisam.result

@@ -456,7 +456,11 @@ return n;
 end|
 reset master;
 insert into t2 values (bug27417(1));
+Warnings:
+Note	1592	Statement may not be safe to log in statement format.
 insert into t2 select bug27417(2);
+Warnings:
+Note	1592	Statement may not be safe to log in statement format.
 reset master;
 insert into t2 values (bug27417(2));
 ERROR 23000: Duplicate entry '2' for key 'PRIMARY'
@@ -473,6 +477,8 @@ select count(*) from t2;
 count(*)
 2
 delete from t2 where a=bug27417(3);
+Warnings:
+Note	1592	Statement may not be safe to log in statement format.
 select count(*) from t2 /* nothing got deleted */;
 count(*)
 2
@@ -486,6 +492,8 @@ count(*)
 5
 delete t2 from t2 where t2.a=bug27417(100) /* must not affect t2 */;
 affected rows: 0
+Warnings:
+Note	1592	Statement may not be safe to log in statement format.
 select count(*) from t1 /* must be 7 */;
 count(*)
 7
@@ -700,7 +708,11 @@ return n;
 end|
 reset master;
 insert into t2 values (bug27417(1));
+Warnings:
+Note	1592	Statement may not be safe to log in statement format.
 insert into t2 select bug27417(2);
+Warnings:
+Note	1592	Statement may not be safe to log in statement format.
 reset master;
 insert into t2 values (bug27417(2));
 ERROR 23000: Duplicate entry '2' for key 'PRIMARY'
@@ -716,6 +728,8 @@ select count(*) from t2;
 count(*)
 2
 delete from t2 where a=bug27417(3);
+Warnings:
+Note	1592	Statement may not be safe to log in statement format.
 select count(*) from t2 /* nothing got deleted */;
 count(*)
 2
@@ -728,6 +742,8 @@ count(*)
 5
 delete t2 from t2 where t2.a=bug27417(100) /* must not affect t2 */;
 affected rows: 0
+Warnings:
+Note	1592	Statement may not be safe to log in statement format.
 select count(*) from t1 /* must be 7 */;
 count(*)
 7

mysql-test/suite/binlog/r/binlog_tmp_table.result

-RESET MASTER;
 create table foo (a int);
 flush logs;
 create temporary table tmp1_foo like foo;

mysql-test/suite/binlog/r/binlog_unsafe.result

@@ -300,4 +300,59 @@ Warnings:
 Note	1592	Statement may not be safe to log in statement format.
 DROP TABLE t1, t2;
 SET @@SESSION.SQL_MODE = @save_sql_mode;
+CREATE TABLE t1 (a INT, b INT PRIMARY KEY AUTO_INCREMENT);
+CREATE TABLE t2 (a INT, b INT PRIMARY KEY AUTO_INCREMENT);
+CREATE FUNCTION func_modify_t1 ()
+RETURNS INT
+BEGIN
+INSERT INTO t1 SET a = 1;
+RETURN 0;
+END|
+# The following statement causes auto-incrementation  
+# of both t1 and t2. It is logged in statement format, 
+# so it should produce unsafe warning.
+INSERT INTO t2 SET a = func_modify_t1();
+Warnings:
+Note	1592	Statement may not be safe to log in statement format.
+SET SESSION binlog_format = MIXED;
+# Check if the statement is logged in row format.
+INSERT INTO t2 SET a = func_modify_t1();
+SHOW BINLOG EVENTS FROM 12283;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	12283	Query	1	12351	BEGIN
+master-bin.000001	12351	Table_map	1	12393	table_id: 44 (test.t2)
+master-bin.000001	12393	Table_map	1	12435	table_id: 45 (test.t1)
+master-bin.000001	12435	Write_rows	1	12473	table_id: 45
+master-bin.000001	12473	Write_rows	1	12511	table_id: 44 flags: STMT_END_F
+master-bin.000001	12511	Query	1	12580	COMMIT
+DROP TABLE t1,t2;
+DROP FUNCTION func_modify_t1;
+SET SESSION binlog_format = STATEMENT;
+CREATE TABLE t1 (a INT);
+CREATE TABLE t2 (a INT, b INT PRIMARY KEY AUTO_INCREMENT);
+CREATE TABLE t3 (a INT, b INT PRIMARY KEY AUTO_INCREMENT);
+create trigger tri_modify_two_tables before insert on t1 for each row begin
+insert into t2(a) values(new.a);
+insert into t3(a) values(new.a);
+end |
+# The following statement causes auto-incrementation  
+# of both t2 and t3. It is logged in statement format, 
+# so it should produce unsafe warning
+INSERT INTO t1 SET a = 1;
+Warnings:
+Note	1592	Statement may not be safe to log in statement format.
+SET SESSION binlog_format = MIXED;
+# Check if the statement is logged in row format.
+INSERT INTO t1 SET a = 2;
+SHOW BINLOG EVENTS FROM 13426;
+Log_name	Pos	Event_type	Server_id	End_log_pos	Info
+master-bin.000001	13426	Query	1	13494	BEGIN
+master-bin.000001	13494	Table_map	1	13535	table_id: 47 (test.t1)
+master-bin.000001	13535	Table_map	1	13577	table_id: 48 (test.t3)
+master-bin.000001	13577	Table_map	1	13619	table_id: 49 (test.t2)
+master-bin.000001	13619	Write_rows	1	13657	table_id: 49
+master-bin.000001	13657	Write_rows	1	13695	table_id: 48
+master-bin.000001	13695	Write_rows	1	13729	table_id: 47 flags: STMT_END_F
+master-bin.000001	13729	Query	1	13798	COMMIT
+DROP TABLE t1,t2,t3;
 "End of tests"

mysql-test/suite/binlog/t/binlog_max_extension.test

+#  BUG#40611: MySQL cannot make a binary log after sequential number beyond 
+#             unsigned long.
+# 
+#  Problem statement
+#  =================
+#
+#    Extension for log file names might be created with negative 
+#    numbers (when counter used would wrap around), causing server 
+#    failure when incrementing -00001 (reaching number 000000 
+#    extension).
+#
+#  Test
+#  ====
+#    This tests aims at testing the a patch that removes negatives 
+#    numbers from log name extensions and checks that the server 
+#    reports gracefully that the limit has been reached.
+#
+#    It instruments index file to point to a log file close to
+#    the new maximum and calls flush logs to get warning.
+#
+
+call mtr.add_suppression("Next log extension: 2147483647. Remaining log filename extensions: 0.");
+call mtr.add_suppression("Log filename extension number exhausted:");
+call mtr.add_suppression("Can't generate a unique log-filename");
+
+
+-- source include/have_log_bin.inc
+RESET MASTER;
+
+-- let $MYSQLD_DATADIR= `select @@datadir`
+
+###############################################
+# check hitting maximum file name extension:
+###############################################
+
+##########
+# Prepare
+##########
+
+# 1. Stop master server
+-- write_file $MYSQLTEST_VARDIR/tmp/mysqld.1.expect
+wait
+EOF
+-- shutdown_server 10
+-- source include/wait_until_disconnected.inc
+
+# 2. Prepare log and index file
+-- copy_file $MYSQLD_DATADIR/master-bin.index $MYSQLD_DATADIR/master-bin.index.orig
+-- copy_file $MYSQLD_DATADIR/master-bin.000001 $MYSQLD_DATADIR/master-bin.2147483646
+-- append_file $MYSQLD_DATADIR/master-bin.index
+master-bin.2147483646
+EOF
+
+# 3. Restart the server
+-- append_file $MYSQLTEST_VARDIR/tmp/mysqld.1.expect
+restart
+EOF
+-- enable_reconnect
+-- source include/wait_until_connected_again.inc
+
+###########
+# Assertion
+###########
+
+# assertion: should throw warning
+FLUSH LOGS;
+
+##############
+# Clean up
+##############
+
+# 1. Stop the server
+-- write_file $MYSQLTEST_VARDIR/tmp/mysqld.1.expect
+wait
+EOF
+-- shutdown_server 10
+-- source include/wait_until_disconnected.inc
+
+# 2. Undo changes to index and log files
+-- remove_file $MYSQLD_DATADIR/master-bin.index
+-- copy_file $MYSQLD_DATADIR/master-bin.index.orig $MYSQLD_DATADIR/master-bin.index
+-- remove_file $MYSQLD_DATADIR/master-bin.index.orig
+
+-- remove_file $MYSQLD_DATADIR/master-bin.2147483646
+-- remove_file $MYSQLD_DATADIR/master-bin.2147483647
+
+# 3. Restart the server
+-- append_file $MYSQLTEST_VARDIR/tmp/mysqld.1.expect
+restart
+EOF
+-- enable_reconnect
+-- source include/wait_until_connected_again.inc

mysql-test/suite/binlog/t/binlog_tmp_table.test

@@ -30,7 +30,6 @@ source include/have_binlog_format_mixed_or_statement.inc;
 
 connect (master,127.0.0.1,root,,test,$MASTER_MYPORT,);
 connect (master1,127.0.0.1,root,,test,$MASTER_MYPORT,);
-RESET MASTER;
 
 create table foo (a int);
 

mysql-test/suite/binlog/t/binlog_unsafe.test

@@ -388,4 +388,72 @@ DELETE FROM t1 LIMIT 1;
 
 DROP TABLE t1, t2;
 SET @@SESSION.SQL_MODE = @save_sql_mode;
+
+#
+# BUG#45827
+# The test verifies if stmt that have more than one 
+# different tables to update with autoinc columns 
+# will produce unsafe warning
+#
+
+# Test case1: stmt that have more than one different tables 
+#             to update with autoinc columns should produce 
+#             unsafe warning when calling a function
+CREATE TABLE t1 (a INT, b INT PRIMARY KEY AUTO_INCREMENT);
+CREATE TABLE t2 (a INT, b INT PRIMARY KEY AUTO_INCREMENT);
+
+# The purpose of this function is to insert into t1 so that the second
+# column is auto_increment'ed.
+DELIMITER |;
+CREATE FUNCTION func_modify_t1 ()
+RETURNS INT
+BEGIN
+  INSERT INTO t1 SET a = 1;
+  RETURN 0;
+END|
+DELIMITER ;|
+--echo # The following statement causes auto-incrementation  
+--echo # of both t1 and t2. It is logged in statement format, 
+--echo # so it should produce unsafe warning.
+INSERT INTO t2 SET a = func_modify_t1();
+
+SET SESSION binlog_format = MIXED;
+--echo # Check if the statement is logged in row format.
+let $pos0_master= query_get_value(SHOW MASTER STATUS, Position, 1);
+INSERT INTO t2 SET a = func_modify_t1();
+eval SHOW BINLOG EVENTS FROM $pos0_master;
+
+# clean up
+DROP TABLE t1,t2;
+DROP FUNCTION func_modify_t1;
+
+# Test case2: stmt that have more than one different tables 
+#             to update with autoinc columns should produce 
+#             unsafe warning when invoking a trigger 
+SET SESSION binlog_format = STATEMENT;
+CREATE TABLE t1 (a INT);
+CREATE TABLE t2 (a INT, b INT PRIMARY KEY AUTO_INCREMENT);
+CREATE TABLE t3 (a INT, b INT PRIMARY KEY AUTO_INCREMENT);
+# The purpose of this function is to insert into t1 so that the second
+# column is auto_increment'ed.
+delimiter |;
+create trigger tri_modify_two_tables before insert on t1 for each row begin
+    insert into t2(a) values(new.a);
+    insert into t3(a) values(new.a);
+end |
+delimiter ;|
+--echo # The following statement causes auto-incrementation  
+--echo # of both t2 and t3. It is logged in statement format, 
+--echo # so it should produce unsafe warning
+INSERT INTO t1 SET a = 1;
+
+SET SESSION binlog_format = MIXED;
+--echo # Check if the statement is logged in row format.
+let $pos1_master= query_get_value(SHOW MASTER STATUS, Position, 1);
+INSERT INTO t1 SET a = 2;
+eval SHOW BINLOG EVENTS FROM $pos1_master;
+
+# clean up
+DROP TABLE t1,t2,t3;
+
 --echo "End of tests"

mysql-test/suite/rpl/my.cnf

@@ -3,13 +3,6 @@
 !include rpl_1slave_base.cnf
 !include include/default_client.cnf
 
+
 [mysqld.2]
-# Hardcode the host to 127.0.0.1 until running on more
-# than one host and it need to be masked
-# master-host=              @mysqld.1.#host
-master-host=              127.0.0.1
-master-port=              @mysqld.1.port
-master-password=          @mysqld.1.#password
-master-user=              @mysqld.1.#user
-master-connect-retry=     1
 

mysql-test/suite/rpl/r/rpl000017.result

 stop slave;
 drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 reset master;
-reset slave;
 drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
-start slave;
-stop slave;
 grant replication slave on *.* to replicate@localhost identified by 'aaaaaaaaaaaaaaab';
 grant replication slave on *.* to replicate@127.0.0.1 identified by 'aaaaaaaaaaaaaaab';
 start slave;

mysql-test/suite/rpl/r/rpl_000015.result

@@ -4,50 +4,8 @@ File	Position	Binlog_Do_DB	Binlog_Ignore_DB
 master-bin.000001	#	<Binlog_Do_DB>	<Binlog_Ignore_DB>
 reset slave;
 SHOW SLAVE STATUS;
-change master to master_host='127.0.0.1';
-SHOW SLAVE STATUS;
-Slave_IO_State	#
-Master_Host	127.0.0.1
-Master_User	test
-Master_Port	3306
-Connect_Retry	7
-Master_Log_File	
-Read_Master_Log_Pos	#
-Relay_Log_File	#
-Relay_Log_Pos	#
-Relay_Master_Log_File	
-Slave_IO_Running	No
-Slave_SQL_Running	No
-Replicate_Do_DB	
-Replicate_Ignore_DB	
-Replicate_Do_Table	
-Replicate_Ignore_Table	#
-Replicate_Wild_Do_Table	
-Replicate_Wild_Ignore_Table	
-Last_Errno	0
-Last_Error	
-Skip_Counter	0
-Exec_Master_Log_Pos	#
-Relay_Log_Space	#
-Until_Condition	None
-Until_Log_File	
-Until_Log_Pos	0
-Master_SSL_Allowed	No
-Master_SSL_CA_File	
-Master_SSL_CA_Path	
-Master_SSL_Cert	
-Master_SSL_Cipher	
-Master_SSL_Key	
-Seconds_Behind_Master	#
-Master_SSL_Verify_Server_Cert	No
-Last_IO_Errno	#
-Last_IO_Error	#
-Last_SQL_Errno	0
-Last_SQL_Error	
-Replicate_Ignore_Server_Ids	
-Master_Server_Id	0
 change master to master_host='127.0.0.1',master_user='root',
-master_password='',master_port=MASTER_PORT;
+master_password='',master_port=MASTER_PORT, MASTER_CONNECT_RETRY=7;
 SHOW SLAVE STATUS;
 Slave_IO_State	#
 Master_Host	127.0.0.1

mysql-test/suite/rpl/r/rpl_bug33931.result

 reset master;
-call mtr.add_suppression("Failed during slave I/O thread initialization");
-stop slave;
 reset slave;
+call mtr.add_suppression("Failed during slave I/O thread initialization");
 SET GLOBAL debug="d,simulate_io_slave_error_on_init,simulate_sql_slave_error_on_init";
 start slave;
 show slave status;

mysql-test/suite/rpl/r/rpl_bug41902.result

+stop slave;
+drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
+reset master;
+reset slave;
+drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
+start slave;
+stop slave;
+SET @@debug="d,simulate_find_log_pos_error";
+reset slave;
+ERROR HY000: Target log not found in binlog index
+show warnings;
+Level	Code	Message
+Error	1373	Target log not found in binlog index
+Error	1371	Failed purging old relay logs: Failed during log reset
+SET @@debug="";
+reset slave;
+change master to master_host='dummy';
+SET @@debug="d,simulate_find_log_pos_error";
+change master to master_host='dummy';
+ERROR HY000: Target log not found in binlog index
+SET @@debug="";
+reset slave;
+change master to master_host='dummy';
+SET @@debug="d,simulate_find_log_pos_error";
+reset master;
+ERROR HY000: Target log not found in binlog index
+SET @@debug="";
+reset master;
+SET @@debug="d,simulate_find_log_pos_error";
+purge binary logs to 'master-bin.000001';
+ERROR HY000: Target log not found in binlog index
+SET @@debug="";
+purge binary logs to 'master-bin.000001';
+End of the tests

mysql-test/suite/rpl/r/rpl_get_master_version_and_clock.result

@@ -4,9 +4,10 @@ reset master;
 reset slave;
 drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
+call mtr.add_suppression("Slave I/O: .* failed with error: Lost connection to MySQL server at 'reading initial communication packet'");
+call mtr.add_suppression("Slave I/O: Master command COM_REGISTER_SLAVE failed: failed registering on master, reconnecting to try again");
 call mtr.add_suppression("Get master clock failed with error: ");
 call mtr.add_suppression("Get master SERVER_ID failed with error: ");
-call mtr.add_suppression("Slave I/O: Master command COM_REGISTER_SLAVE failed: failed registering on master, reconnecting to try again");
 call mtr.add_suppression("Fatal error: The slave I/O thread stops because master and slave have equal MySQL server ids; .*");
 SELECT IS_FREE_LOCK("debug_lock.before_get_UNIX_TIMESTAMP");
 IS_FREE_LOCK("debug_lock.before_get_UNIX_TIMESTAMP")

mysql-test/suite/rpl/r/rpl_heartbeat.result

 reset master;
 set @restore_slave_net_timeout= @@global.slave_net_timeout;
 set @@global.slave_net_timeout= 10;
-Warnings:
-Warning	1624	The currect value for master_heartbeat_period exceeds the new value of `slave_net_timeout' sec. A sensible value for the period should be less than the timeout.
 change master to master_host='127.0.0.1',master_port=MASTER_PORT, master_user='root';
 show status like 'Slave_heartbeat_period';;
 Variable_name	Slave_heartbeat_period
@@ -59,7 +57,7 @@ Slave_IO_State	#
 Master_Host	127.0.0.1
 Master_User	root
 Master_Port	MASTER_PORT
-Connect_Retry	1
+Connect_Retry	60
 Master_Log_File	master-bin.000001
 Read_Master_Log_Pos	280
 Relay_Log_File	#
@@ -100,7 +98,7 @@ Slave_IO_State	#
 Master_Host	127.0.0.1
 Master_User	root
 Master_Port	MASTER_PORT
-Connect_Retry	1
+Connect_Retry	60
 Master_Log_File	master-bin.000001
 Read_Master_Log_Pos	280
 Relay_Log_File	#

mysql-test/suite/rpl/r/rpl_load_from_master.result

-stop slave;
-drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
-reset master;
-reset slave;
-drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
-start slave;
-drop database if exists mysqltest;
-drop database if exists mysqltest2;
-drop database if exists mysqltest3;
-drop database if exists mysqltest;
-drop database if exists mysqltest2;
-drop database if exists mysqltest3;
-create database mysqltest2;
-create database mysqltest;
-create database mysqltest2;
-create table mysqltest2.foo (n int)ENGINE=MyISAM;
-insert into mysqltest2.foo values(4);
-create table mysqltest2.foo (n int)ENGINE=MyISAM;
-insert into mysqltest2.foo values(5);
-create table mysqltest.bar (m int)ENGINE=MyISAM;
-insert into mysqltest.bar values(15);
-select mysqltest2.foo.n,mysqltest.bar.m from mysqltest2.foo,mysqltest.bar;
-n	m
-4	15
-drop database mysqltest;
-drop database if exists mysqltest2;
-drop database mysqltest;
-ERROR HY000: Can't drop database 'mysqltest'; database doesn't exist
-drop database mysqltest2;
-set sql_log_bin = 0;
-create database mysqltest2;
-create database mysqltest;
-show databases like 'mysql%';
-Database (mysql%)
-mysql
-mysqltest
-mysqltest2
-create table mysqltest2.t1(n int, s char(20))ENGINE=MyISAM;
-create table mysqltest2.t2(n int, s text)ENGINE=MyISAM;
-insert into mysqltest2.t1 values (1, 'one'), (2, 'two'), (3, 'three');
-insert into mysqltest2.t2 values (11, 'eleven'), (12, 'twelve'), (13, 'thirteen');
-create table mysqltest.t1(n int, s char(20))ENGINE=MyISAM;
-create table mysqltest.t2(n int, s text)ENGINE=MyISAM;
-insert into mysqltest.t1 values (1, 'one test'), (2, 'two test'), (3, 'three test');
-insert into mysqltest.t2 values (11, 'eleven test'), (12, 'twelve test'),
-(13, 'thirteen test');
-set sql_log_bin = 1;
-show databases like 'mysql%';
-Database (mysql%)
-mysql
-create database mysqltest2;
-create table mysqltest2.t1(n int, s char(20))ENGINE=MyISAM;
-insert into mysqltest2.t1 values (1, 'original foo.t1');
-create table mysqltest2.t3(n int, s char(20))ENGINE=MyISAM;
-insert into mysqltest2.t3 values (1, 'original foo.t3');
-create database mysqltest3;
-create table mysqltest3.t1(n int, s char(20))ENGINE=MyISAM;
-insert into mysqltest3.t1 values (1, 'original foo2.t1');
-create database mysqltest;
-create table mysqltest.t1(n int, s char(20))ENGINE=MyISAM;
-insert into mysqltest.t1 values (1, 'original bar.t1');
-create table mysqltest.t3(n int, s char(20))ENGINE=MyISAM;
-insert into mysqltest.t3 values (1, 'original bar.t3');
-load data from master;
-show databases like 'mysql%';
-Database (mysql%)
-mysql
-mysqltest
-mysqltest2
-mysqltest3
-use mysqltest2;
-show tables;
-Tables_in_mysqltest2
-t1
-t3
-select * from t1;
-n	s
-1	original foo.t1
-use mysqltest3;
-show tables;
-Tables_in_mysqltest3
-t1
-select * from t1;
-n	s
-1	original foo2.t1
-use mysqltest;
-show tables;
-Tables_in_mysqltest
-t1
-t2
-t3
-select * from mysqltest.t1;
-n	s
-1	one test
-2	two test
-3	three test
-select * from mysqltest.t2;
-n	s
-11	eleven test
-12	twelve test
-13	thirteen test
-select * from mysqltest.t3;
-n	s
-1	original bar.t3
-insert into mysqltest.t1 values (4, 'four test');
-select * from mysqltest.t1;
-n	s
-1	one test
-2	two test
-3	three test
-4	four test
-stop slave;
-reset slave;
-load data from master;
-start slave;
-insert into mysqltest.t1 values (5, 'five bar');
-select * from mysqltest.t1;
-n	s
-1	one test
-2	two test
-3	three test
-4	four test
-5	five bar
-load table mysqltest.t1 from master;
-ERROR 42S01: Table 't1' already exists
-drop table mysqltest.t1;
-load table mysqltest.t1 from master;
-load table bar.t1 from master;
-ERROR HY000: Error from master: 'Table 'bar.t1' doesn't exist'
-drop database mysqltest;
-drop database mysqltest2;
-drop database mysqltest2;
-drop database mysqltest3;

mysql-test/suite/rpl/r/rpl_load_table_from_master.result

-stop slave;
-drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
-reset master;
-reset slave;
-drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
-start slave;
-"******************** Test Requirment 1 *************"
-SET SQL_LOG_BIN=0,timestamp=200006;
-CREATE TABLE t1(t TIMESTAMP NOT NULL,a CHAR(1))ENGINE=MyISAM;
-INSERT INTO t1 ( a) VALUE ('F');
-select unix_timestamp(t) from t1;
-unix_timestamp(t)
-200006
-load table t1 from master;
-select unix_timestamp(t) from t1;
-unix_timestamp(t)
-200006
-set SQL_LOG_BIN=1,timestamp=default;
-drop table t1;
-set SQL_LOG_BIN=0;
-"******************** Test Requirment 2 *************"
-CREATE TABLE t1 (a INT NOT NULL) ENGINE=MyISAM MAX_ROWS=4000 CHECKSUM=1;
-INSERT INTO t1 VALUES (1);
-load table t1 from master;
-check table t1;
-Table	Op	Msg_type	Msg_text
-test.t1	check	status	OK
-drop table t1;
-drop table t1;
-set SQL_LOG_BIN=0;
-create table t1 (word char(20) not null, index(word))ENGINE=MyISAM;
-load data infile '../../std_data/words.dat' into table t1;
-create table t2 (word char(20) not null)ENGINE=MyISAM;
-load data infile '../../std_data/words.dat' into table t2;
-create table t3 (word char(20) not null primary key)ENGINE=MyISAM;
-load table t1 from master;
-load table t2 from master;
-load table t3 from master;
-check table t1;
-Table	Op	Msg_type	Msg_text
-test.t1	check	status	OK
-select count(*) from t2;
-count(*)
-70
-select count(*) from t3;
-count(*)
-0
-set SQL_LOG_BIN=1;
-drop table if exists t1,t2,t3;
-create table t1(n int);
-drop table t1;

mysql-test/suite/rpl/r/rpl_mixed_ddl_dml.result

@@ -13,8 +13,8 @@ n
 2001
 2002
 show slave hosts;
-Server_id	Host	Port	Rpl_recovery_rank	Master_id
-2	127.0.0.1	9999	0	1
+Server_id	Host	Port	Master_id
+2	127.0.0.1	9999	1
 drop table t1;
 stop slave;
 create table t2(id int auto_increment primary key, created datetime);

mysql-test/suite/rpl/r/rpl_row_reset_slave.result

@@ -92,7 +92,7 @@ reset slave;
 SHOW SLAVE STATUS;
 Slave_IO_State	#
 Master_Host	127.0.0.1
-Master_User	root
+Master_User	test
 Master_Port	MASTER_PORT
 Connect_Retry	1
 Master_Log_File	
@@ -130,6 +130,7 @@ Last_SQL_Errno	0
 Last_SQL_Error	
 Replicate_Ignore_Server_Ids	
 Master_Server_Id	1
+change master to master_user='root';
 start slave;
 SHOW SLAVE STATUS;
 Slave_IO_State	#

mysql-test/suite/rpl/r/rpl_empty_master_crash.result → mysql-test/suite/rpl/r/rpl_show_slave_hosts.result

@@ -4,8 +4,14 @@ reset master;
 reset slave;
 drop table if exists t1,t2,t3,t4,t5,t6,t7,t8,t9;
 start slave;
-SHOW SLAVE STATUS;
-load table t1 from master;
-ERROR 08S01: Error connecting to master: Master is not configured
-load table t1 from master;
-ERROR HY000: Error from master: 'Table 'test.t1' doesn't exist'
+RESET SLAVE;
+CHANGE MASTER TO master_host='127.0.0.1',master_port=MASTER_PORT,master_user='root';
+START SLAVE IO_THREAD;
+SHOW SLAVE HOSTS;
+Server_id	Host	Port	Master_id
+3	slave2	DEFAULT_PORT	1
+2		SLAVE_PORT	1
+STOP SLAVE IO_THREAD;
+SHOW SLAVE HOSTS;
+Server_id	Host	Port	Master_id
+2		SLAVE_PORT	1

mysql-test/suite/rpl/r/rpl_sp.result

@@ -191,14 +191,9 @@ begin
 return unix_timestamp();
 end|
 ERROR HY000: You do not have the SUPER privilege and binary logging is enabled (you *might* want to use the less safe log_bin_trust_function_creators variable)
-set @old_log_bin_trust_routine_creators= @@global.log_bin_trust_routine_creators;
 set @old_log_bin_trust_function_creators= @@global.log_bin_trust_function_creators;
-set global log_bin_trust_routine_creators=1;
-Warnings:
-Warning	1287	The syntax '@@log_bin_trust_routine_creators' is deprecated and will be removed in MySQL 6.0. Please use '@@log_bin_trust_function_creators' instead
 set global log_bin_trust_function_creators=0;
 set global log_bin_trust_function_creators=1;
-set @old_log_bin_trust_routine_creators= @@global.log_bin_trust_routine_creators;
 set @old_log_bin_trust_function_creators= @@global.log_bin_trust_function_creators;
 set global log_bin_trust_function_creators=1;
 create function fn2()
@@ -557,13 +552,7 @@ insert into t values (1);
 return 0;
 end
 master-bin.000001	#	Query	#	#	use `mysqltest`; SELECT `mysqltest2`.`f1`()
-set @@global.log_bin_trust_routine_creators= @old_log_bin_trust_routine_creators;
-Warnings:
-Warning	1287	The syntax '@@log_bin_trust_routine_creators' is deprecated and will be removed in MySQL 6.0. Please use '@@log_bin_trust_function_creators' instead
 set @@global.log_bin_trust_function_creators= @old_log_bin_trust_function_creators;
-set @@global.log_bin_trust_routine_creators= @old_log_bin_trust_routine_creators;
-Warnings:
-Warning	1287	The syntax '@@log_bin_trust_routine_creators' is deprecated and will be removed in MySQL 6.0. Please use '@@log_bin_trust_function_creators' instead
 set @@global.log_bin_trust_function_creators= @old_log_bin_trust_function_creators;
 drop database mysqltest;
 drop database mysqltest2;

mysql-test/suite/rpl/r/rpl_stm_reset_slave.result

@@ -92,7 +92,7 @@ reset slave;
 SHOW SLAVE STATUS;
 Slave_IO_State	#
 Master_Host	127.0.0.1
-Master_User	root
+Master_User	test
 Master_Port	MASTER_PORT
 Connect_Retry	1
 Master_Log_File	
@@ -130,6 +130,7 @@ Last_SQL_Errno	0
 Last_SQL_Error	
 Replicate_Ignore_Server_Ids	
 Master_Server_Id	1
+change master to master_user='root';
 start slave;
 SHOW SLAVE STATUS;
 Slave_IO_State	#

mysql-test/suite/rpl/t/disabled.def

@@ -10,6 +10,5 @@
 #
 ##############################################################################
 
-rpl_get_master_version_and_clock:  # Bug#46931 2009-10-17 joro rpl.rpl_get_master_version_and_clock fails
 rpl_cross_version               : BUG#43913 2009-10-22 luis rpl_cross_version fails with symptom in described in bug report
 rpl_spec_variables		: BUG#47661 2009-10-27 jasonh rpl_spec_variables fails on PB2 hpux

mysql-test/suite/rpl/t/rpl000010.test

@@ -6,14 +6,10 @@ source include/master-slave.inc;
 create table t1 (n int not null auto_increment primary key);
 insert into t1 values(NULL);
 insert into t1 values(2);
-save_master_pos;
-connection slave;
-sync_with_master;
+sync_slave_with_master;
 select n from t1;
 connection master;
 drop table t1;
-save_master_pos;
-connection slave;
-sync_with_master;
+sync_slave_with_master;
 
 # End of 4.1 tests

mysql-test/suite/rpl/t/rpl000011.test

@@ -4,7 +4,9 @@ create table t1 (n int);
 insert into t1 values(1);
 sync_slave_with_master; 
 stop slave;
+--source include/wait_for_slave_to_stop.inc
 start slave;
+--source include/wait_for_slave_to_start.inc
 connection master;
 insert into t1 values(2);
 #let slave catch up

mysql-test/suite/rpl/t/rpl000013.test

@@ -9,9 +9,7 @@
 
 --source include/have_binlog_format_mixed_or_statement.inc
 source include/master-slave.inc;
-save_master_pos;
-connection slave;
-sync_with_master;
+sync_slave_with_master;
 connection master;
 
 create table t2(n int);
@@ -46,8 +44,6 @@ connection master2;
 # exist in this connection.
 
 drop table if exists t1,t2;
-save_master_pos;
-connection slave;
-sync_with_master;
+sync_slave_with_master;
 
 # End of 4.1 tests

mysql-test/suite/rpl/t/rpl000017-slave.opt

---skip-slave-start

mysql-test/suite/rpl/t/rpl000017.test

+# The test manually replaces the relay-log.info file with connection
+# information which the slave then should pick up. However, to avoid
+# overwriting the file, no CHANGE MASTER TO nor RESET SLAVE statements
+# should be executed.
+#
+# Starting replication before granting a replication user privileges
+# to replicate will cause the start slave to fail, so we shouldn't do
+#  that.
+
+let $no_change_master = 1;
+let $skip_slave_start = 1;
 source include/master-slave.inc;
-connection slave;
-stop slave;
+
 connection master;
 grant replication slave on *.* to replicate@localhost identified by 'aaaaaaaaaaaaaaab';
 grant replication slave on *.* to replicate@127.0.0.1 identified by 'aaaaaaaaaaaaaaab';
 connection slave;
 start slave;
 source include/wait_for_slave_to_start.inc;
+
 connection master;
 --disable_warnings
 drop table if exists t1;

mysql-test/suite/rpl/t/rpl_000015-slave.opt

---server-id=22 --master-connect-retry=7
+--server-id=22

mysql-test/suite/rpl/t/rpl_000015.test

@@ -15,14 +15,12 @@ connection slave;
 reset slave;
 source include/show_slave_status2.inc;
 
-change master to master_host='127.0.0.1';
-# The following needs to be cleaned up when change master is fixed
-source include/show_slave_status2.inc;
 --replace_result $MASTER_MYPORT MASTER_PORT
 eval change master to master_host='127.0.0.1',master_user='root',
- master_password='',master_port=$MASTER_MYPORT;
+ master_password='',master_port=$MASTER_MYPORT, MASTER_CONNECT_RETRY=7;
 source include/show_slave_status2.inc;
 start slave;
+--source include/wait_for_slave_to_start.inc
 sync_with_master;
 source include/show_slave_status2.inc;
 connection master;

mysql-test/suite/rpl/t/rpl_alter.test

@@ -10,15 +10,11 @@ insert into mysqltest.t1 values (1,2);
 create table mysqltest.t2 (n int);
 insert into mysqltest.t2 values (45);
 rename table mysqltest.t2 to mysqltest.t3, mysqltest.t1 to mysqltest.t2;
-save_master_pos;
-connection slave;
-sync_with_master;
+sync_slave_with_master;
 select * from mysqltest.t2;
 select * from mysqltest.t3;
 connection master;
 drop database mysqltest;
-save_master_pos;
-connection slave;
-sync_with_master;
+sync_slave_with_master;
 
 # End of 4.1 tests

mysql-test/suite/rpl/t/rpl_auto_increment_11932.test

@@ -51,9 +51,7 @@ CALL simpleproc3();
 
 select * from t1;
 
-save_master_pos;
-connection slave;
-sync_with_master;
+sync_slave_with_master;
 
 use test1;
 select * from t1;

mysql-test/suite/rpl/t/rpl_bit.test

@@ -78,10 +78,8 @@ SELECT  oSupp, sSuppD, GSuppDf, VNotSupp, x034 FROM test.t1;
 SELECT hex(bit1) FROM test.t1 ORDER BY bit1;
 SELECT hex(bit2) from test.t1 ORDER BY bit2;
 SELECT hex(bit3) from test.t1 ORDER BY bit3;
-save_master_pos;
+sync_slave_with_master;
 
-connection slave;
-sync_with_master;
 SELECT  oSupp, sSuppD, GSuppDf, VNotSupp, x034 FROM test.t1;
 SELECT hex(bit1) FROM test.t1 ORDER BY bit1;
 SELECT hex(bit2) from test.t1 ORDER BY bit2;

mysql-test/suite/rpl/t/rpl_bit_npk.test

@@ -76,10 +76,8 @@ SELECT  oSupp, sSuppD, GSuppDf, VNotSupp, x034
 SELECT hex(bit1) from test.t1 ORDER BY bit1;
 SELECT hex(bit2) from test.t1 ORDER BY bit2;
 SELECT hex(bit3) from test.t1 ORDER BY bit3;
-save_master_pos;
+sync_slave_with_master;
 
-connection slave;
-sync_with_master;
 SELECT  oSupp, sSuppD, GSuppDf, VNotSupp, x034
     FROM test.t1
     ORDER BY oSupp, sSuppD, GSuppDf, VNotSupp, x034;
@@ -100,10 +98,8 @@ UPDATE test.t3 SET a = 2 WHERE b = 0;
 
 SELECT a, hex(b) FROM test.t2 ORDER BY a,b;
 SELECT * FROM test.t3 ORDER BY a,b;
-save_master_pos;
+sync_slave_with_master;
 
-connection slave;
-sync_with_master;
 SELECT a, hex(b) FROM test.t2 ORDER BY a,b;
 SELECT * FROM test.t3 ORDER BY a,b;
 

mysql-test/suite/rpl/t/rpl_bug33931.test

@@ -8,23 +8,25 @@ source include/have_log_bin.inc;
 connect (master,127.0.0.1,root,,test,$MASTER_MYPORT,);
 connect (slave,127.0.0.1,root,,test,$SLAVE_MYPORT,);
 
-
 connection master;
 reset master;
 
 connection slave;
+reset slave;
 
 # Add suppression for expected warnings in slaves error log
 call mtr.add_suppression("Failed during slave I/O thread initialization");
 
---disable_warnings
-stop slave;
---enable_warnings
-reset slave;
-
 # Set debug flags on slave to force errors to occur
 SET GLOBAL debug="d,simulate_io_slave_error_on_init,simulate_sql_slave_error_on_init";
 
+--disable_query_log
+eval CHANGE MASTER TO MASTER_USER='root',
+                      MASTER_CONNECT_RETRY=1,
+                      MASTER_HOST='127.0.0.1',
+                      MASTER_PORT=$MASTER_MYPORT;
+--enable_query_log
+
 start slave;
 
 connection master;

mysql-test/suite/rpl/t/rpl_bug41902-slave.opt

+--loose-debug=-d,simulate_find_log_pos_error

mysql-test/suite/rpl/t/rpl_bug41902.test

+# Test for Bug #41902 MYSQL_BIN_LOG::reset_logs() doesn't call my_error()
+#                     in face of an error
+#
+
+source include/have_debug.inc;
+source include/master-slave.inc;
+
+#
+# test checks that 
+# a. there is no crash when find_log_pos() returns with an error
+#    that tests expect to receive;
+# b. in the case of multiple error messages the first error message is 
+#    reported to the user and others are available as warnings.
+#
+
+connection slave;
+stop slave;
+
+SET @@debug="d,simulate_find_log_pos_error";
+
+--error ER_UNKNOWN_TARGET_BINLOG
+reset slave;
+show warnings;
+
+SET @@debug="";
+reset slave;
+change master to master_host='dummy';
+
+SET @@debug="d,simulate_find_log_pos_error";
+
+--error ER_UNKNOWN_TARGET_BINLOG
+change master to master_host='dummy';
+
+SET @@debug="";
+reset slave;
+change master to master_host='dummy';
+
+connection master;
+SET @@debug="d,simulate_find_log_pos_error";
+--error ER_UNKNOWN_TARGET_BINLOG
+reset master;
+
+SET @@debug="";
+reset master;
+
+SET @@debug="d,simulate_find_log_pos_error";
+--error ER_UNKNOWN_TARGET_BINLOG
+purge binary logs to 'master-bin.000001';
+
+SET @@debug="";
+purge binary logs to 'master-bin.000001';
+
+--disable_query_log
+call mtr.add_suppression("Failed to locate old binlog or relay log files");
+call mtr.add_suppression("MYSQL_LOG::purge_logs was called with file ./master-bin.000001 not listed in the index");
+connection slave;
+call mtr.add_suppression("Failed to locate old binlog or relay log files");
+call mtr.add_suppression("MYSQL_LOG::purge_logs was called with file ./master-bin.000001 not listed in the index");
+--enable_query_log
+
+--echo End of the tests

mysql-test/suite/rpl/t/rpl_change_master.test

@@ -28,9 +28,7 @@ sync_with_master;
 select * from t1;
 connection master;
 drop table t1;
-save_master_pos;
-connection slave;
-sync_with_master;
+sync_slave_with_master;
 
 # End of 4.1 tests
 

mysql-test/suite/rpl/t/rpl_circular_for_4_hosts.test

@@ -7,6 +7,9 @@
 #############################################################
 --source include/have_innodb.inc
 
+# Use wait_for_slave_to_(start|stop) for current connections
+let $keep_connection= 1;
+
 # Set up circular ring and new names for servers
 --echo *** Set up circular ring by schema A->B->C->D->A *** 
 --source include/circular_rpl_for_4_hosts_init.inc

mysql-test/suite/rpl/t/rpl_colSize.test

@@ -16,6 +16,7 @@ DROP TABLE IF EXISTS t1;
 --echo *** Create "wider" table on slave ***
 sync_slave_with_master;
 STOP SLAVE;
+--source include/wait_for_slave_to_stop.inc
 RESET SLAVE;
 
 eval CREATE TABLE t1 (
@@ -69,6 +70,7 @@ RESET MASTER;
 --echo *** Start replication ***
 connection slave;
 START SLAVE;
+--source include/wait_for_slave_to_start.inc
 
 --echo *** Insert data on master and display it. ***
 connection master;

mysql-test/suite/rpl/t/rpl_do_grant.test

@@ -8,9 +8,7 @@ connection master;
 delete from mysql.user where user=_binary'rpl_do_grant';
 delete from mysql.db where user=_binary'rpl_do_grant';
 flush privileges;
-save_master_pos;
-connection slave;
-sync_with_master;
+sync_slave_with_master;
 # if these DELETE did nothing on the master, we need to do them manually on the
 # slave.
 delete from mysql.user where user=_binary'rpl_ignore_grant';
@@ -21,17 +19,13 @@ flush privileges;
 connection master;
 grant select on *.* to rpl_do_grant@localhost;
 grant drop on test.* to rpl_do_grant@localhost;
-save_master_pos;
-connection slave;
-sync_with_master;
+sync_slave_with_master;
 show grants for rpl_do_grant@localhost;
 
 # test replication of SET PASSWORD
 connection master;
 set password for rpl_do_grant@localhost=password("does it work?");
-save_master_pos;
-connection slave;
-sync_with_master;
+sync_slave_with_master;
 select password<>_binary'' from mysql.user where user=_binary'rpl_do_grant';
 
 #
@@ -44,9 +38,7 @@ select password<>'' from mysql.user where user='rpl_do_grant';
 set sql_mode='ANSI_QUOTES';
 set password for rpl_do_grant@localhost=password('does it work?');
 set sql_mode='';
-save_master_pos;
-connection slave;
-sync_with_master;
+sync_slave_with_master;
 select password<>'' from mysql.user where user='rpl_do_grant';
 
 

mysql-test/suite/rpl/t/rpl_drop.test

@@ -7,10 +7,6 @@ drop table if exists t1, t2;
 create table t1 (a int);
 --error 1051
 drop table t1, t2;
-save_master_pos;
-connection slave;
-sync_with_master;
+sync_slave_with_master;
 
 # End of 4.1 tests
-
-

mysql-test/suite/rpl/t/rpl_drop_view.test

@@ -20,9 +20,7 @@ drop view v1, not_exist_view;
 --error 1146
 select * from v1;
 drop view v2, v3;
-save_master_pos;
-connection slave;
-sync_with_master;
+sync_slave_with_master;
 --error 1146
 select * from v1;
 --error 1146

mysql-test/suite/rpl/t/rpl_dual_pos_advance.test

@@ -22,6 +22,7 @@ connection master;
 eval change master to master_host="127.0.0.1",master_port=$SLAVE_MYPORT,master_user="root";
 
 start slave;
+--source include/wait_for_slave_to_start.inc
 
 # now we test it
 
@@ -38,12 +39,11 @@ sync_with_master;
 #             log-slave-updates and circul repl
 #
 stop slave;
+--source include/wait_for_slave_to_stop.inc
 
 create table t2 (n int); # create one ignored event
 
-save_master_pos;
-connection slave;
-sync_with_master;
+sync_slave_with_master;
 
 connection slave;
 
@@ -85,6 +85,7 @@ start slave until master_log_file="slave-bin.000001",master_log_pos=663;
 select * from t3;
 
 start slave;
+--source include/wait_for_slave_to_start.inc
 
 # BUG#13023 is that Exec_master_log_pos may stay too low "forever":
 
@@ -94,9 +95,7 @@ create table t4 (n int); # create 3 ignored events
 create table t5 (n int);
 create table t6 (n int);
 
-save_master_pos;
-connection slave;
-sync_with_master;
+sync_slave_with_master;
 
 connection slave;
 
@@ -114,11 +113,10 @@ show tables;
 # cleanup
 
 stop slave;
+--source include/wait_for_slave_to_stop.inc
 reset slave;
 drop table t1,t2,t3,t4,t5,t6;
 
-save_master_pos;
-connection slave;
-sync_with_master;
+sync_slave_with_master;
 
 # End of 4.1 tests

mysql-test/suite/rpl/t/rpl_empty_master_crash-master.opt

---force-restart

mysql-test/suite/rpl/t/rpl_empty_master_crash.test

-source include/master-slave.inc;
-
-source include/show_slave_status.inc;
-
-#
-# Load table should not succeed on the master as this is not a slave
-#
---error 1218
-load table t1 from master;
-connection slave;
---error 1188
-load table t1 from master;
-
-# End of 4.1 tests

mysql-test/suite/rpl/t/rpl_err_ignoredtable.test

@@ -14,19 +14,15 @@ create table t4 (a int primary key);
 --error 1022, ER_DUP_ENTRY
 insert into t1 values (1),(1);
 insert into t4 values (1),(2);
-save_master_pos;
-connection slave;
 # as the t1 table is ignored on the slave, the slave should be able to sync
-sync_with_master;
+sync_slave_with_master;
 # check that the table has been ignored, because otherwise the test is nonsense
 show tables like 't1';
 show tables like 't4';
 SELECT * FROM test.t4 ORDER BY a;
 connection master;
 drop table t1;
-save_master_pos;
-connection slave;
-sync_with_master;
+sync_slave_with_master;
 
 # Now test that even critical errors (connection killed)
 # are ignored if rules allow it.
@@ -53,15 +49,11 @@ connection master;
 --error 0,1317,2013
 reap;
 connection master1;
-save_master_pos;
-connection slave;
-sync_with_master;
+sync_slave_with_master;
 SELECT * FROM test.t4 ORDER BY a;
 
 connection master1;
 DROP TABLE test.t4;
-save_master_pos;
-connection slave;
-sync_with_master;
+sync_slave_with_master;
 # End of 4.1 tests
 # Adding comment for force manual merge 5.0 -> wl1012. delete me if needed

mysql-test/suite/rpl/t/rpl_flushlog_loop.test

 # Testing if "flush logs" command bouncing resulting in logs created in a loop 
 # in case of bi-directional replication
 -- source include/master-slave.inc
+# Use wait_for_slave_to_(start|stop) for current connections
+let $keep_connection= 1;
 
 let $MYSQLD_DATADIR= `select @@datadir`;
 --replace_result $MYSQLD_DATADIR MYSQLD_DATADIR/
@@ -9,18 +11,20 @@ show variables like 'relay_log%';
 connection slave;
 --disable_warnings
 stop slave;
+--source include/wait_for_slave_to_stop.inc
 --enable_warnings
 --replace_result $MASTER_MYPORT MASTER_PORT
 eval change master to master_host='127.0.0.1',master_user='root',
  master_password='',master_port=$MASTER_MYPORT;
 start slave;
-
+--source include/wait_for_slave_to_start.inc
 #
 #  Start replication slave -> master
 #
 connection master;
 --disable_warnings
 stop slave;
+--source include/wait_for_slave_to_stop.inc
 --enable_warnings
 --replace_result $SLAVE_MYPORT SLAVE_PORT
 eval change master to master_host='127.0.0.1',master_user='root',

mysql-test/suite/rpl/t/rpl_known_bugs_detection.test

@@ -34,12 +34,14 @@ SELECT * FROM t1;
 
 # restart replication for the next testcase
 stop slave;
+--source include/wait_for_slave_to_stop.inc
 reset slave;
 connection master;
 reset master;
 drop table t1;
 connection slave;
 start slave;
+--source include/wait_for_slave_to_start.inc
 
 # testcase with INSERT SELECT
 connection master;

mysql-test/suite/rpl/t/rpl_load_from_master.test

-# This one assumes we are ignoring updates on tables in database mysqltest2,
-# but doing the ones in database mysqltest
-#################################################################
-# Change Author: JBM
-# Change Date: 2006-02-02
-# Change: Added ENGINE=MyISAM
-# Reason: LOAD from master is only supported by MyISAM
-#################################################################
-
-source include/master-slave.inc;
---disable_warnings
-drop database if exists mysqltest;
-drop database if exists mysqltest2;
-drop database if exists mysqltest3;
-connection slave;
-drop database if exists mysqltest;
-drop database if exists mysqltest2;
-drop database if exists mysqltest3;
-connection master;
-create database mysqltest2;
-create database mysqltest;
---enable_warnings
-
-save_master_pos;
-connection slave;
-sync_with_master;
-create database mysqltest2;
-create table mysqltest2.foo (n int)ENGINE=MyISAM;
-insert into mysqltest2.foo values(4);
-connection master;
-create table mysqltest2.foo (n int)ENGINE=MyISAM;
-insert into mysqltest2.foo values(5);
-create table mysqltest.bar (m int)ENGINE=MyISAM;
-insert into mysqltest.bar values(15);
-save_master_pos;
-connection slave;
-sync_with_master;
-select mysqltest2.foo.n,mysqltest.bar.m from mysqltest2.foo,mysqltest.bar;
-connection master;
-drop database mysqltest;
-drop database if exists mysqltest2;
-save_master_pos;
-connection slave;
-sync_with_master;
---error 1008
-drop database mysqltest;
-drop database mysqltest2;
-
-# Now let's test load data from master
-
-# First create some databases and tables on the master
-
-connection master;
-set sql_log_bin = 0;
-create database mysqltest2;
-create database mysqltest;
-show databases like 'mysql%';
-create table mysqltest2.t1(n int, s char(20))ENGINE=MyISAM;
-create table mysqltest2.t2(n int, s text)ENGINE=MyISAM;
-insert into mysqltest2.t1 values (1, 'one'), (2, 'two'), (3, 'three'); 
-insert into mysqltest2.t2 values (11, 'eleven'), (12, 'twelve'), (13, 'thirteen'); 
-
-create table mysqltest.t1(n int, s char(20))ENGINE=MyISAM;
-create table mysqltest.t2(n int, s text)ENGINE=MyISAM;
-insert into mysqltest.t1 values (1, 'one test'), (2, 'two test'), (3, 'three test'); 
-insert into mysqltest.t2 values (11, 'eleven test'), (12, 'twelve test'),
- (13, 'thirteen test'); 
-set sql_log_bin = 1;
-save_master_pos;
-connection slave;
-sync_with_master;
-
-# This should show that the slave is empty at this point
-show databases like 'mysql%';
-# Create mysqltest2 and mysqltest3 on slave; we expect that LOAD DATA FROM
-# MASTER will neither touch database mysqltest nor mysqltest3
-create database mysqltest2;
-create table mysqltest2.t1(n int, s char(20))ENGINE=MyISAM;
-insert into mysqltest2.t1 values (1, 'original foo.t1');
-create table mysqltest2.t3(n int, s char(20))ENGINE=MyISAM;
-insert into mysqltest2.t3 values (1, 'original foo.t3');
-create database mysqltest3;
-create table mysqltest3.t1(n int, s char(20))ENGINE=MyISAM;
-insert into mysqltest3.t1 values (1, 'original foo2.t1');
-
-# Create mysqltest, and mysqltest.t1, to check that it gets replaced,
-# and mysqltest.t3 to check that it is not touched (there is no
-# mysqltest.t3 on master)
-create database mysqltest;
-create table mysqltest.t1(n int, s char(20))ENGINE=MyISAM;
-insert into mysqltest.t1 values (1, 'original bar.t1');
-create table mysqltest.t3(n int, s char(20))ENGINE=MyISAM;
-insert into mysqltest.t3 values (1, 'original bar.t3');
-
-load data from master;
-
-# Now let's check if we have the right tables and the right data in them
-show databases like 'mysql%';
-use mysqltest2;
-
-# LOAD DATA FROM MASTER uses only replicate_*_db rules to decide which
-# databases have to be copied. So it thinks "mysqltest" has to be
-# copied. Before 4.0.16 it would first drop "mysqltest", then create
-# "mysqltest". This "drop" is a bug; in that case t3 would disappear.  So
-# here the effect of this bug (BUG#1248) would be to leave an empty
-# "mysqltest" on the slave.
-
-show tables; # should be t1 & t3
-select * from t1; # should be slave's original
-use mysqltest3;
-show tables; # should be t1
-select * from t1; # should be slave's original
-use mysqltest;
-show tables; # should contain master's copied t1&t2, slave's original t3
-select * from mysqltest.t1;
-select * from mysqltest.t2;
-select * from mysqltest.t3;
-
-# Now let's see if replication works
-connection master;
-insert into mysqltest.t1 values (4, 'four test');
-save_master_pos;
-connection slave;
-sync_with_master;
-select * from mysqltest.t1;
-
-# Check that LOAD DATA FROM MASTER is able to create master.info
-# if needed (if RESET SLAVE was used before), before writing to it (BUG#2922).
-
-stop slave;
-reset slave;
-load data from master;
-start slave;
-# see if replication coordinates were restored fine
-connection master;
-insert into mysqltest.t1 values (5, 'five bar');
-save_master_pos;
-connection slave;
-sync_with_master;
-select * from mysqltest.t1;
-
-# Check that LOAD DATA FROM MASTER reports the error if it can't drop a
-# table to be overwritten.
-# DISABLED FOR NOW AS chmod IS NOT PORTABLE ON NON-UNIX
-# insert into mysqltest.t1 values(10, 'should be there');
-# flush tables;
-let $MYSQLD_SLAVE_DATADIR= `select @@datadir`;
-# system chmod 500 $MYSQLD_SLAVE_DATADIR/mysqltest/;
-# --error 6
-# load data from master;  # should fail (errno 13)
-# system chmod 700 $MYSQLD_SLAVE_DATADIR/mysqltest/;
-# select * from mysqltest.t1; # should contain the row (10, ...)
-
-
-# Check that LOAD TABLE FROM MASTER fails if the table exists on slave
---error 1050
-load table mysqltest.t1 from master;
-drop table mysqltest.t1;
-load table mysqltest.t1 from master;
-
-# Check what happens when requestion not existing table
-#
---error 1188
-load table bar.t1 from master;
-
-# as LOAD DATA FROM MASTER failed it did not restart slave threads
-# DISABLED FOR NOW
-# start slave;
-
-# Now time for cleanup
-connection master;
-drop database mysqltest;
-drop database mysqltest2;
-save_master_pos;
-connection slave;
-sync_with_master;
-# These have to be dropped on slave because they are not replicated
-drop database mysqltest2;
-drop database mysqltest3;
-
-# End of 4.1 tests

mysql-test/suite/rpl/t/rpl_load_table_from_master.test

-###########################################################
-# Change Author: JBM
-# Change Date: 2006-2-2
-# Change: Added ENGINE=$engine_type for first create table
-# Reason: Only MyISAM supports load from master no need to
-# run test case for other engines, in addition test will
-# fail if other engines are set as default engine
-###########################################################
-# Change Author: JBM
-# Change Date: 2006-2-3
-# Change: removed ENGINE=$engine_type for first create table
-# and renamed test file to rpl_load_table_from_master.test.
-# In addition added test requirements.
-# Reason: Request from review.
-############################################################
-# REQUIREMENT TEST 1:
-# LOAD TABLE FROM MASTER must work with a forced timestamp.
-############################################################
-#
-# Test forced timestamp
-#
--- source include/master-slave.inc
-
--- echo "******************** Test Requirment 1 *************"
-
-# Don't log table creating to the slave as we want to test LOAD TABLE
-SET SQL_LOG_BIN=0,timestamp=200006;
-eval CREATE TABLE t1(t TIMESTAMP NOT NULL,a CHAR(1))ENGINE=MyISAM;
-INSERT INTO t1 ( a) VALUE ('F');
-select unix_timestamp(t) from t1;
-connection slave;
-load table t1 from master;
-select unix_timestamp(t) from t1;
-
-# Delete the created table on master and slave
-connection master;
-set SQL_LOG_BIN=1,timestamp=default;
-drop table t1;
-save_master_pos;
-connection slave;
-sync_with_master;
-connection master;
-
-#
-# Test copying table with checksum
-#
-
-# Don't log table creating to the slave as we want to test LOAD TABLE
-set SQL_LOG_BIN=0;
-
-#######################################################
-# REQUIREMENTi TEST 2:
-#LOAD TABLE FROM MASTER must work with table checksum
-#######################################################
--- echo "******************** Test Requirment 2 *************"
-
-eval CREATE TABLE t1 (a INT NOT NULL) ENGINE=MyISAM MAX_ROWS=4000 CHECKSUM=1;
-INSERT INTO t1 VALUES (1);
-save_master_pos;
-connection slave;
-sync_with_master;
-load table t1 from master;
-check table t1;
-drop table t1;
-connection master;
-drop table t1;
-save_master_pos;
-connection slave;
-sync_with_master;
-
-connection master;
-set SQL_LOG_BIN=0;
-create table t1 (word char(20) not null, index(word))ENGINE=MyISAM;
-load data infile '../../std_data/words.dat' into table t1;
-create table t2 (word char(20) not null)ENGINE=MyISAM;
-load data infile '../../std_data/words.dat' into table t2;
-create table t3 (word char(20) not null primary key)ENGINE=MyISAM;
-connection slave;
-load table t1 from master;
-load table t2 from master;
-load table t3 from master;
-check table t1;
-select count(*) from t2;
-select count(*) from t3;
-connection master;
-set SQL_LOG_BIN=1;
-drop table if exists t1,t2,t3;
-save_master_pos;
-connection slave;
-sync_with_master;
-create table t1(n int);
-drop table t1;
-
-
-
-
-
-# End of 4.1 tests

mysql-test/suite/rpl/t/rpl_loaddata_charset.test

@@ -23,9 +23,7 @@ load data infile '../../std_data/loaddata6.dat' into table t1 character set koi8
 
 select hex(a) from t1;
 
-save_master_pos;
-connection slave;
-sync_with_master;
+sync_slave_with_master;
 
 select hex(a) from t1;
 connection master;

mysql-test/suite/rpl/t/rpl_loaddata_fatal.test

@@ -16,7 +16,7 @@ connection master;
 LOAD DATA INFILE '../../std_data/rpl_loaddata.dat' INTO TABLE t1;
 
 connection slave;
-wait_for_slave_to_stop;
+--source include/wait_for_slave_sql_to_stop.inc
 source include/show_slave_status.inc;
 
 connection slave;

mysql-test/suite/rpl/t/rpl_loaddata_m.test

@@ -28,9 +28,7 @@ LOAD DATA INFILE '../../std_data/rpl_loaddata.dat' INTO TABLE mysqltest.t1;
 SELECT COUNT(*) FROM mysqltest.t1;
 
 # Now lets check the slave to see what we have :-)
-save_master_pos;
-connection slave;
-sync_with_master;
+sync_slave_with_master;
 
 SHOW DATABASES;
 

mysql-test/suite/rpl/t/rpl_loaddata_s.test

@@ -16,9 +16,7 @@ load data infile '../../std_data/rpl_loaddata.dat' into table test.t1;
 
 # Test logging on slave;
 
-save_master_pos;
-connection slave;
-sync_with_master;
+sync_slave_with_master;
 select count(*) from test.t1; # check that LOAD was replicated
 source include/show_binlog_events.inc;
 

mysql-test/suite/rpl/t/rpl_loaddatalocal.test

@@ -27,15 +27,11 @@ truncate table t1;
 --replace_result $MYSQLD_DATADIR MYSQLD_DATADIR
 eval load data local infile '$MYSQLD_DATADIR/rpl_loaddatalocal.select_outfile' into table t1;
 --remove_file $MYSQLD_DATADIR/rpl_loaddatalocal.select_outfile
-save_master_pos;
-connection slave;
-sync_with_master;
+sync_slave_with_master;
 select a,count(*) from t1 group by a;
 connection master;
 drop table t1;
-save_master_pos;
-connection slave;
-sync_with_master;
+sync_slave_with_master;
 
 # End of 4.1 tests
 

mysql-test/suite/rpl/t/rpl_master_pos_wait.test

 # See if master_pos_wait(,,timeout)
 # Terminates with "timeout expired" (-1)
 source include/master-slave.inc;
-save_master_pos;
-connection slave;
-sync_with_master;
+sync_slave_with_master;
 # Ask for a master log that has certainly not been reached yet
 # timeout= 2 seconds
 select master_pos_wait('master-bin.999999',0,2);

mysql-test/suite/rpl/t/rpl_mixed_ddl_dml.test

@@ -18,6 +18,7 @@ show slave hosts;
 drop table t1;
 sync_slave_with_master;
 stop slave;
+--source include/wait_for_slave_to_stop.inc
 connection master;
 
 # Test replication of timestamp
@@ -35,6 +36,7 @@ create table t5 select * from t4;
 save_master_pos;
 connection slave;
 start slave;
+--source include/wait_for_slave_to_start.inc
 sync_with_master;
 select * from t2;
 show create table t3;

mysql-test/suite/rpl/t/rpl_multi_delete.test

@@ -19,8 +19,6 @@ select * from t2;
 
 connection master;
 drop table t1,t2;
-save_master_pos;
-connection slave;
-sync_with_master;
+sync_slave_with_master;
 
 # End of 4.1 tests

mysql-test/suite/rpl/t/rpl_multi_delete2.test

@@ -27,11 +27,9 @@ SELECT * FROM a;
 insert into a values(2),(3);
 delete alias FROM a alias where alias.i=2;
 select * from a;
-save_master_pos;
-connection slave;
+sync_slave_with_master;
 
 use mysqltest_to;
-sync_with_master;
 select * from a;
 
 # BUG#3461

mysql-test/suite/rpl/t/rpl_optimize.test

@@ -47,8 +47,7 @@ sync_with_master; # won't work if slave SQL thread stopped
 
 connection master; # cleanup
 drop table t1;
-connection slave;
-sync_with_master;
+sync_slave_with_master;
 
 # If the machine is so fast that slave syncs before OPTIMIZE
 # starts, this test wil demonstrate nothing but will pass.

mysql-test/suite/rpl/t/rpl_packet.test

@@ -38,20 +38,15 @@ select @@net_buffer_length, @@max_allowed_packet;
 create table `t1` (`f1` LONGTEXT) ENGINE=MyISAM;
 
 INSERT INTO `t1`(`f1`) VALUES ('aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa1023');
-save_master_pos;
+sync_slave_with_master;
 
-connection slave;
-sync_with_master;
 eval select count(*) from `$db`.`t1` /* must be 1 */;
 
 SHOW STATUS LIKE 'Slave_running';
 select * from information_schema.session_status where variable_name= 'SLAVE_RUNNING';
 connection master;
 eval drop database $db;
-save_master_pos;
-
-connection slave;
-sync_with_master;
+sync_slave_with_master;
 
 #
 # Bug #23755: Replicated event larger that max_allowed_packet infinitely re-transmits

mysql-test/suite/rpl/t/rpl_ps.test

@@ -6,9 +6,7 @@
 ###########################################################
 source include/master-slave.inc;
 
-#save_master_pos;
-#connection slave;
-#sync_with_master;
+#sync_slave_with_master;
 #reset master;
 #connection master;
 
@@ -30,20 +28,16 @@ prepare stmt2 from @var2;
 set @var1='from-master-3';
 execute stmt2 using @var1;
 
-save_master_pos;
-connection slave;
-sync_with_master;
+sync_slave_with_master;
 SELECT * FROM t1 ORDER BY n;
 
 connection master;
 
 drop table t1;
 
-save_master_pos;
-connection slave;
-sync_with_master;
+sync_slave_with_master;
 stop slave;
-
+source include/wait_for_slave_to_stop.inc;
 # End of 4.1 tests
 
 #
@@ -102,13 +96,12 @@ use mysqltest1;
 EXECUTE stmt_d_1;
 
 --echo
---save_master_pos
+--sync_slave_with_master
+
 
 --echo
 --echo # Connection: slave
 --echo
---connection slave
---sync_with_master
 
 --echo
 SELECT * FROM t1;
@@ -125,13 +118,12 @@ DROP DATABASE mysqltest1;
 use test;
 DROP TABLE t1;
 --echo
---save_master_pos
+--sync_slave_with_master
+
 
 --echo
 --echo # Connection: slave
 --echo
---connection slave
---sync_with_master
 
 --echo
 STOP SLAVE;

mysql-test/suite/rpl/t/rpl_relayspace.test

@@ -4,6 +4,7 @@
 source include/master-slave.inc;
 connection slave;
 stop slave;
+--source include/wait_for_slave_to_stop.inc
 connection master;
 # This will generate a master's binlog > 10 bytes
 create table t1 (a int);

mysql-test/suite/rpl/t/rpl_replicate_do.test

@@ -18,18 +18,14 @@ insert into t1 values(15),(16),(17);
 update t1 set m=20 where m=16;
 delete from t1 where m=17;
 create table t11 select * from t1;
-save_master_pos;
-connection slave;
-sync_with_master;
+sync_slave_with_master;
 select * from t1 ORDER BY m;
 select * from t2;
 --error 1146
 select * from t11;
 connection master;
 drop table if exists t1,t2,t11;
-save_master_pos;
-connection slave;
-sync_with_master;
+sync_slave_with_master;
 # show slave status, just to see of it prints replicate-do-table
 --replace_result $MASTER_MYPORT MASTER_PORT
 --replace_column 1 # 7 # 8 # 9 # 22 # 23 # 33 # 35 # 36 #

mysql-test/suite/rpl/t/rpl_rotate_logs.test

@@ -56,6 +56,7 @@ connection master;
 reset master;
 connection slave;
 start slave;
+--source include/wait_for_slave_to_start.inc
 connection master;
 
 #
@@ -100,6 +101,7 @@ connection slave;
 #restart slave skipping one event
 set global sql_slave_skip_counter=1;
 start slave;
+--source include/wait_for_slave_to_start.inc
 
 connection master;
 
@@ -161,9 +163,7 @@ select count(*) from t3 where n >= 4;
 create table t4 select * from temp_table;
 source include/show_binary_logs.inc;
 source include/show_master_status.inc;
-save_master_pos;
-connection slave;
-sync_with_master;
+sync_slave_with_master;
 select * from t4;
 
 source include/show_slave_status2.inc;

mysql-test/suite/rpl/t/rpl_row_create_table.test

@@ -25,8 +25,10 @@ sync_slave_with_master;
 --disable_query_log
 set @storage_engine = @@global.storage_engine;
 STOP SLAVE;
+--source include/wait_for_slave_to_stop.inc
 SET GLOBAL storage_engine=memory;
 START SLAVE;
+--source include/wait_for_slave_to_start.inc
 --enable_query_log
 
 --source include/reset_master_and_slave.inc
@@ -129,8 +131,10 @@ DROP TABLE IF EXISTS t1,t2,t3,t4,t5,t6,t7,t8,t9;
 sync_slave_with_master;
 # Here we reset the value of the default storage engine
 STOP SLAVE;
+--source include/wait_for_slave_to_stop.inc
 SET GLOBAL storage_engine=@storage_engine;
 START SLAVE;
+--source include/wait_for_slave_to_start.inc
 --enable_ps_protocol
 
 # BUG#22864 (Rollback following CREATE ... SELECT discards 'CREATE
@@ -138,11 +142,13 @@ START SLAVE;
 --echo ================ BUG#22864 ================
 connection slave;
 STOP SLAVE;
+--source include/wait_for_slave_to_stop.inc
 RESET SLAVE;
 connection master;
 RESET MASTER;
 connection slave;
 START SLAVE;
+--source include/wait_for_slave_to_start.inc
 connection master;
 SET AUTOCOMMIT=0;
 CREATE TABLE t1 (a INT);
@@ -190,6 +196,7 @@ sync_slave_with_master;
 # Some tests with temporary tables
 connection slave;
 STOP SLAVE;
+--source include/wait_for_slave_to_stop.inc
 RESET SLAVE;
 
 connection master;
@@ -197,6 +204,7 @@ RESET MASTER;
 
 connection slave;
 START SLAVE;
+--source include/wait_for_slave_to_start.inc
 
 connection master;
 CREATE TABLE t1 (a INT);

mysql-test/suite/rpl/t/rpl_row_mysqlbinlog.test

@@ -116,16 +116,14 @@ sync_slave_with_master;
 #(the server was started with skip-slave-start)
 --disable_warnings
 stop slave;
+--source include/wait_for_slave_to_stop.inc
 --enable_warnings
---require r/slave-stopped.result
-show status like 'Slave_running';
 connection master;
 reset master;
 connection slave;
 reset slave;
 start slave;
---require r/slave-running.result
-show status like 'Slave_running';
+--source include/wait_for_slave_to_start.inc
 connection master;
 
 # We should be clean at this point, now we will run in the file from above.
@@ -164,7 +162,7 @@ remove_file $MYSQLTEST_VARDIR/tmp/master.sql;
 
 
 # this test for position option
-# By setting this position to 417, we should only get the create of t3
+# By setting this position to 416, we should only get the create of t3
 --disable_query_log
 select "--- Test 2 position test --" as "";
 --enable_query_log
@@ -181,9 +179,7 @@ select "--- Test 3 First Remote test --" as "";
 
 # This is broken now
 --replace_result $MYSQLTEST_VARDIR MYSQLTEST_VARDIR
---exec $MYSQL_BINLOG --short-form --local-load=$MYSQLTEST_VARDIR/tmp/ --stop-position=570 --read-from-remote-server --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000001
-
-# This part is disabled due to bug #17654
+--exec $MYSQL_BINLOG --short-form --local-load=$MYSQLTEST_VARDIR/tmp/ --stop-position=569 --read-from-remote-server --user=root --host=127.0.0.1 --port=$MASTER_MYPORT master-bin.000001
 
 --disable_query_log
 select "--- Test 4 Second Remote test --" as "";
@@ -206,16 +202,14 @@ sync_slave_with_master;
 
 --disable_warnings
 stop slave;
+--source include/wait_for_slave_to_stop.inc
 --enable_warnings
---require r/slave-stopped.result
-show status like 'Slave_running';
 connection master;
 reset master;
 connection slave;
 reset slave;
 start slave;
---require r/slave-running.result
-show status like 'Slave_running';
+--source include/wait_for_slave_to_start.inc
 connection master;
 
 # We should be clean at this point, now we will run in the file from above.
@@ -272,8 +266,8 @@ let $MYSQLD_DATADIR= `select @@datadir;`;
 select "--- Test 7 reading stdin w/position --" as "";
 --enable_query_log
 --replace_result $MYSQL_TEST_DIR MYSQL_TEST_DIR
---exec $MYSQL_BINLOG --short-form --position=417 --stop-position=569 - < $MYSQLD_DATADIR/master-bin.000001
-
+--exec $MYSQL_BINLOG --short-form --position=417 --stop-position=570 - < $MYSQLD_DATADIR/master-bin.000001
+       
 # Bug#16217 (mysql client did not know how not switch its internal charset)
 --disable_query_log
 select "--- Test 8 switch internal charset --" as "";
@@ -285,16 +279,14 @@ sync_slave_with_master;
 
 --disable_warnings
 stop slave;
+--source include/wait_for_slave_to_stop.inc
 --enable_warnings
---require r/slave-stopped.result
-show status like 'Slave_running';
 connection master;
 reset master;
 connection slave;
 reset slave;
 start slave;
---require r/slave-running.result
-show status like 'Slave_running';
+--source include/wait_for_slave_to_start.inc
 connection master;
 
 create table t4 (f text character set utf8);