into  mail.hezx.com:/media/sda3/work/mysql/bkwork/bug#28908/5.1

into  mail.hezx.com:/media/sda3/work/mysql/bkwork/bug#28908/5.0

into  capulet.kindahl.net:/home/mats/devel/fix-mysql-5.0-rpl

When set the server-id dynamically, the server_id member of current thread is not updated.

Update the server_id member of current thread after updated the global variable value.

into  riska.(none):/home/sven/bkroot/5.1-new-rpl

Complementary patch since LOAD DATA INFILE was not covered in
the previous patch.

This patch adds a check so that the slave skip counter is not
decreased to zero if seeing a BEGIN_LOAD_QUERY_EVENT,
APPEND_BLOCK_EVENT, or CREATE_FILE_EVENT since these cannot
end a group. The group is terminated by an EXECUTE_LOAD_QUERY_
EVENT or DELETE_FILE_EVENT.

into  dl145h.mysql.com:/data0/mkindahl/mysql-5.1-rpl

into  dl145h.mysql.com:/data0/mkindahl/mysql-5.1-rpl

into  hezx.(none):/media/sda3/work/mysql/bkwork/bug#32205/mysql-5.1-new-rpl

fine

The reason of this bug is that when mysqlbinlog dumps a query, the query is written to
output with a delimeter appended right after it, if the query string ends with a '--'
comment, then the delimeter would be considered as part of the comment, if there are any
statements after this query, then it will cause a syntax error.

Start a newline before appending delimiter after a query string

The reason of this bug is that when mysqlbinlog dumps a query, the query is written to
output with a delimeter appended right after it, if the query string ends with a '--'
comment, then the delimeter would be considered as part of the comment, if there are any
statements after this query, then it will cause a syntax error.

Start a newline before appending delimiter after a query string

into  riska.(none):/home/sven/bk/b32407-5.1-new-rpl-mysqlbinlog_base64

Problem: it is unsafe to read base64-printed events without first
reading the Format_description_log_event (FD).  Currently, mysqlbinlog
cannot print the FD.

As a side effect, another bug has also been fixed: When mysqlbinlog
--start-position=X was specified, no ROLLBACK was printed. I changed
this, so that ROLLBACK is always printed.

This patch does several things:

 - Format_description_log_event (FD) now print themselves in base64
   format.

 - mysqlbinlog is now able to print FD events.  It has three modes:
    --base64-output=auto    Print row events in base64 output, and print
                            FD event.  The FD event is printed even if
                            it is outside the range specified with
                            --start-position, because it would not be
                            safe to read row events otherwise. This is
                            the default.

    --base64-output=always  Like --base64-output=auto, but also print
                            base64 output for query events.  This is
                            like the old --base64-output flag, which
                            is also a shorthand for
                            --base64-output=always

    --base64-output=never   Never print base64 output, generate error if
                            row events occur in binlog.  This is
                            useful to suppress the FD event in binlogs
                            known not to contain row events (e.g.,
                            because BINLOG statement is unsafe,
                            requires root privileges, is not SQL, etc)

 - the BINLOG statement now handles FD events correctly, by setting
   the thread's rli's relay log's description_event_for_exec to the
   loaded event.

   In fact, executing a BINLOG statement is almost the same as reading
   an event from a relay log.  Before my patch, the code for this was
   separated (exec_relay_log_event in slave.cc executes events from
   the relay log, mysql_client_binlog_statement in sql_binlog.cc
   executes BINLOG statements).  I needed to augment
   mysql_client_binlog_statement to do parts of what
   exec_relay_log_event does.  Hence, I did a small refactoring and
   moved parts of exec_relay_log_event to a new function, which I
   named apply_event_and_update_pos.  apply_event_and_update_pos is
   called both from exec_relay_log_event and from
   mysql_client_binlog_statement.

 - When a non-FD event is executed in a BINLOG statement, without
   previously executing a FD event in a BINLOG statement, it generates
   an error, because that's unsafe.  I took a new error code for that:
   ER_NO_FORMAT_DESCRIPTION_EVENT_BEFORE_BINLOG_STATEMENTS.

   In order to get a decent error message containing the name of the
   event, I added the class method char*
   Log_event::get_type_str(Log_event_type type), which returns a
   string name for the given Log_event_type.  This is just like the
   existing char* Log_event::get_type_str(), except it is a class
   method that takes the log event type as parameter.

   I also added PRE_GA_*_ROWS_LOG_EVENT to Log_event::get_type_str(),
   so that names of old rows event are properly printed.

 - When reading an event, I added a check that the event type is known
   by the current Format_description_log_event. Without this, it may
   crash on bad input (and I was struck by this several times).

 - I patched the following test cases, which all contain BINLOG
   statements for row events which must be preceded by BINLOG
   statements for FD events:
    - rpl_bug31076

While I was here, I fixed some small things in log_event.cc:

 - replaced hard-coded 4 by EVENT_TYPE_OFFSET in 3 places

 - replaced return by DBUG_VOID_RETURN in one place

 - The name of the logfile can be '-' to indicate stdin.  Before my
   patch, the code just checked if the first character is '-'; now it
   does a full strcmp().  Probably, all arguments that begin with a -
   are already handled somewhere else as flags, but I still think it
   is better that the code reflects what it is supposed to do, with as
   little dependencies as possible on other parts of the code.  If we
   one day implement that all command line arguments after -- are
   files (as most unix tools do), then we need this.

I also fixed the following in slave.cc:

 - next_event() was declared twice, and queue_event was not static but
   should be static (not used outside the file).

into  mysql.com:/home/bar/mysql-work/mysql-5.1.b29562v2

Changing charset to latin1.

Now, every transaction (including autocommit transactions) starts with
a BEGIN and ends with a COMMIT/ROLLBACK in the binlog.
Added a test case, and updated lots of test case result files.

into  kindahl-laptop.dnsalias.net:/home/bk/b31582-mysql-5.1-rpl

into  mysql.com:/home/bar/mysql-work/mysql-5.1.b29562v2

into  dl145j.mysql.com:/tmp/andrei/bug31552

into  hezx.(none):/media/hda5/work/mysql/bkwork/bug#30998/mysql-5.1-new-rpl

into  dl145j.mysql.com:/tmp/andrei/bug31552

    without PK
Bug#31609 Not all RBR slave errors reported as errors
bug#32468 delete rows event on a table with foreign key constraint fails

The first two bugs comprise idempotency issues.
First, there was no error code reported under conditions of the bug
description although the slave sql thread halted.
Second, executions were different with and without presence of prim key in
the table.
Third, there was no way to instruct the slave whether to ignore an error
and skip to the following event or to halt.
Fourth, there are handler errors which might happen due to idempotent
applying of binlog but those were not listed among the "idempotent" error
list.

All the named issues are addressed.
Wrt to the 3rd, there is the new global system variable, changeble at run
time, which controls the slave sql thread behaviour.
The new variable allows further extensions to mimic the sql_mode
session/global variable.
To address the 4th, the new bug#32468 had to be fixed as it was staying
in the way.

into  hezx.(none):/media/hda5/work/mysql/bkwork/bug#30998/merge-mysql-5.1-new-rpl

into  hezx.(none):/media/hda5/work/mysql/bkwork/bug#30998/5.1

into  hezx.(none):/media/hda5/work/mysql/bkwork/bug#30998/5.0

Just adding testcase. This bug was fixed by patch for BUG#31583.

In the patch for BUG#21842, the code for handling old rows events were
refactored.  There were a bug in the refactored code (possibly introduced
after the patch for BUG#21842) that caused caused the refactored old events
to read a columns bitmap after image even though there is no such bitmap
for old events. As a result, the reading got out of sync, and started reading
invalid data.

This patch removes all trace of the after image column bitmap from the refactored
old events and removes functions that are no longer needed because they are empty. 

  Fixing a wrong comment.

When executing drop view statement on the master, the statement is not written into bin-log if any error occurs, this could cause master slave inconsistence if any view has been dropped. 

If some error occured and no view has been dropped, don't bin-log the statement, if at least one view has been dropped the query is bin-logged possible with an error.