Everything is working but a few things is still remaining


ndb/include/kernel/ndb_limits.h:
  New maximum batch size and total batch size over cluster
ndb/src/kernel/blocks/dbdih/DbdihMain.cpp:
  Only two options
  1) One fragment per node
  2) One fragment in total
ndb/src/kernel/blocks/dblqh/Dblqh.hpp:
  First step preparing for a dynamic array for scan_acc_op_ptr.
  Prepared by hiding all accesses by subroutines.
ndb/src/kernel/blocks/dblqh/DblqhMain.cpp:
  First step preparing for a dynamic array for scan_acc_op_ptr.
  Prepared by hiding all accesses by subroutines.
  Removed some dead code

Some small printout fixes


ndb/include/kernel/signaldata/ScanFrag.hpp:
  Mixed up Hexadecimal and decimal notation, cost me 5 hours of
  debugging to find, grrr..
ndb/src/kernel/blocks/dbtc/Dbtc.hpp:
  Fixed some declaration so that new bigger info fits in variables
ndb/test/ndbapi/testScanPerf.cpp:
  Fix for printing int's instead of Uint64 which for some reason
  caused problems on my Mac.
  Also print performance in each loop.

into mysql.com:/Users/mikron/mysql-4.1-ndb


ndb/src/kernel/blocks/dbtc/DbtcMain.cpp:
  Auto merged
ndb/src/kernel/vm/Configuration.cpp:
  Auto merged

ndb/include/transporter/TransporterDefinitions.hpp:
  Correction for bad math
ndb/src/kernel/blocks/dbacc/DbaccMain.cpp:
  Moved heavy check code to NDB_DEBUG_FULL

Not yet fully working
Scan reads work fine, not scan updates


ndb/include/kernel/ndb_limits.h:
  Introducing a new parameter plus increasing the max no of parallel
  operations per scan in LQH, first step in WL 2025
ndb/include/kernel/signaldata/ScanFrag.hpp:
  Only need one clientOpPtr
  Concurrency is batch_size to use in this scan
  batch_byte_size is max no of bytes sent in a batch
  first_batch_size is the batch size in the first batch
ndb/include/kernel/signaldata/ScanTab.hpp:
  apiOperationPtr is sent as long signal data
  batch_byte_size and first_batch_size is needed for further transport
  to LQH
  batch size can now be bigger than before
ndb/include/kernel/signaldata/TcKeyReq.hpp:
  More concurrency means more size for scanInfo also in TCKEYREQ
ndb/include/ndbapi/NdbReceiver.hpp:
  New subroutine to caclculate batch size and similar parameters
ndb/include/ndbapi/NdbScanOperation.hpp:
  batch size calculated before sending, not necessary to store anymore
ndb/src/common/debugger/signaldata/ScanTab.cpp:
  Updated signal printer for SCAN_TABREQ
ndb/src/kernel/blocks/backup/Backup.cpp:
  Fixes to make it compile, not fixed for BACKUP being useful yet
ndb/src/kernel/blocks/dblqh/Dblqh.hpp:
  Removed parameters no longer needed and added some new ones.
ndb/src/kernel/blocks/dblqh/DblqhMain.cpp:
  Fix for cmaxAccOps that was using the wrong constant
  Removed old code
  New SCAN_FRAGREQ signal
ndb/src/kernel/blocks/dbtc/Dbtc.hpp:
  New variables
  Removed dead code
ndb/src/kernel/blocks/dbtc/DbtcMain.cpp:
  New SCAN_TABREQ, SCAN_FRAGREQ, SCAN_FRAGCONF and SCAN_TABCONF
  Fixed some error handling to be more efficient
ndb/src/kernel/blocks/suma/Suma.cpp:
  Fixes to make it compile, not yet usable for SUMA features
ndb/src/kernel/vm/Configuration.cpp:
  Fix for wrong constant
ndb/src/ndbapi/NdbApiSignal.cpp:
  Fix for not using constants
ndb/src/ndbapi/NdbApiSignal.hpp:
  Added possibility to get signal sending node from signal
ndb/src/ndbapi/NdbConnectionScan.cpp:
  Moved declaration
ndb/src/ndbapi/NdbReceiver.cpp:
  New routine to calculate batch_size etc.
ndb/src/ndbapi/NdbScanOperation.cpp:
  Various fixes for sending SCAN_TABREQ and other stuff

ndb/src/kernel/blocks/dbtc/DbtcMain.cpp:
  Compensate for "extra" lqhkeyreqrec during index read (when IgnoreError)
ndb/src/mgmsrv/main.cpp:
  Read corrent local node id
ndb/tools/waiter.cpp:
  Yet another user of LocalConfig

ndb/include/mgmcommon/ConfigRetriever.hpp:
  Separate connect and all/fetch
ndb/include/mgmcommon/LocalConfig.hpp:
  Use BaseString
ndb/src/common/mgmcommon/ConfigRetriever.cpp:
  Separate connect and all/fetch
ndb/src/common/mgmcommon/LocalConfig.cpp:
  Removed useless onlyNodeId
ndb/src/kernel/main.cpp:
  Separeted Configuration fetch/setup
ndb/src/kernel/vm/Configuration.cpp:
  Separeted Configuration fetch/setup
ndb/src/kernel/vm/Configuration.hpp:
  Separeted Configuration fetch/setup
ndb/src/mgmapi/mgmapi.cpp:
  Fixed some return codes
ndb/src/mgmclient/main.cpp:
  LocalConfig update
ndb/src/mgmsrv/MgmtSrvr.cpp:
  Put mutex around reserving node'ids
ndb/src/mgmsrv/MgmtSrvr.hpp:
  Put mutex around reserving node'ids
ndb/src/mgmsrv/MgmtSrvrConfig.cpp:
  Changes ConfigRetreiver interface
ndb/src/mgmsrv/Services.cpp:
  Allow reserve same id twice
ndb/src/mgmsrv/main.cpp:
  Ignore SIGPIPE
ndb/src/ndbapi/TransporterFacade.cpp:
  ConfigRetriever interface

testTransaction -n *Scan*
testTimeout -n *


ndb/include/kernel/signaldata/DumpStateOrd.hpp:
  Added DUMP for tc appl timeout
ndb/src/kernel/blocks/dbtc/DbtcMain.cpp:
  Send tckey conf if m_exec_flags is set
  Added dump for appl timeout
ndb/test/include/HugoOperations.hpp:
  Add scanRead
ndb/test/ndbapi/testTimeout.cpp:
  Reenable
ndb/test/ndbapi/testTransactions.cpp:
  Fix scan test cases
ndb/test/run-test/daily-basic-tests.txt:
  reenable timeout-tests
  added testTransaction -n Scan* testcases
ndb/test/src/HugoOperations.cpp:
  Fix scan
ndb/test/src/NDBT_Test.cpp:
  Drop table before test...(if createTable==true)

into mysql.com:/home/jonas/src/ll


ndb/src/mgmapi/mgmapi.cpp:
  Auto merged
ndb/src/mgmsrv/MgmtSrvr.cpp:
  Auto merged
ndb/src/mgmsrv/Services.cpp:
  Auto merged

ndb/src/kernel/blocks/dbtc/DbtcMain.cpp:
  Operations with marker always leads to abort even
  if IgnoreError was supplied (limitation)
  
  Check marker before marking operation as aborted (which removes marker)
ndb/src/kernel/blocks/dbtup/DbtupPagMan.cpp:
  Init cnoOfAllocatedPages after returnCommonArea

into mysql.com:/home/jonas/src/ll


ndb/src/kernel/blocks/dblqh/DblqhMain.cpp:
  Auto merged
ndb/src/kernel/blocks/dbtc/DbtcMain.cpp:
  Auto merged
ndb/src/kernel/blocks/dbtup/DbtupDebug.cpp:
  Auto merged
ndb/src/kernel/blocks/dbtup/DbtupSystemRestart.cpp:
  Auto merged

ndb/src/kernel/blocks/backup/Backup.hpp:
  SCAN_FRAGCONF contains length of key(s) aswell
ndb/src/kernel/blocks/dblqh/DblqhMain.cpp:
  Send correct signal length

into mysql.com:/home/kostja/mysql/mysql-4.1-root

the second is for the rest of time declarations in mysys.


include/my_time.h:
  New declarations moved from mysql_time.h
include/mysql_time.h:
  New declarations moved to my_time.h.
sql/tztime.cc:
  Enforcing Monty's approach to header files.
sql/tztime.h:
  Enforcing Monty's approach to header files: everything is included in
  one place.

BitKeeper/etc/logging_ok:
  auto-union
configure.in:
  SCCS merged

into eel.hemma.oreland.se:/ndb/clone-mysql-4.1-ndb-daily-2004-08-04


BitKeeper/etc/logging_ok:
  auto-union
ndb/src/common/debugger/signaldata/SignalDataPrint.cpp:
  Auto merged
ndb/src/cw/cpcd/Process.cpp:
  Auto merged
ndb/src/kernel/blocks/dblqh/DblqhMain.cpp:
  Auto merged
ndb/src/kernel/blocks/dbtux/Dbtux.hpp:
  Auto merged
ndb/src/kernel/blocks/dbtux/DbtuxMeta.cpp:
  Auto merged
ndb/src/kernel/blocks/dbtux/DbtuxTree.cpp:
  Auto merged
ndb/src/mgmsrv/MgmtSrvr.cpp:
  Auto merged
ndb/test/ndbapi/testBasic.cpp:
  Auto merged
ndb/test/run-test/main.cpp:
  Auto merged
ndb/test/src/HugoTransactions.cpp:
  Auto merged
sql/ha_ndbcluster.cc:
  Auto merged

into mysql.com:/Users/mikron/mysql-4.1


BitKeeper/etc/logging_ok:
  auto-union

BitKeeper/etc/logging_ok:
  Logging to logging@openlogging.org accepted

ndb/src/ndbapi/NdbConnection.cpp:
  When using IgnoreError always wait for TCKEYCONF

  Changed URL in error message, page has moved


netware/mysql_test_run.c:
  Changed URL in error message, page has moved
sql/mysqld.cc:
  Changed URL in error message, page has moved
BitKeeper/etc/logging_ok:
  Logging to logging@openlogging.org accepted

Only updates values mgmsrv's on main memory
to be used in test prg's


ndb/include/mgmapi/mgmapi_debug.h:
  Update on config
ndb/include/util/ConfigValues.hpp:
  Update on config
ndb/src/mgmapi/mgmapi.cpp:
  Update on config
ndb/src/mgmsrv/MgmtSrvr.cpp:
  Update on config
ndb/src/mgmsrv/MgmtSrvr.hpp:
  Update on config
ndb/src/mgmsrv/Services.cpp:
  Update on config
ndb/src/mgmsrv/Services.hpp:
  Update on config

1) Fix so that scan takeover is possible after SR
2) Reserve two pages for SR "zero pages"


ndb/include/ndbapi/NdbOperation.hpp:
  remove unused method
ndb/src/kernel/blocks/dblqh/DblqhMain.cpp:
  Fix bug#4909
  don't reset tableFragptr during SR
ndb/src/kernel/blocks/dbtc/DbtcMain.cpp:
  Also send reason for disallowing rollback
ndb/src/kernel/blocks/dbtup/Dbtup.hpp:
  Add bitmask of free pages to use for page 0 during SR
ndb/src/kernel/blocks/dbtup/DbtupDebug.cpp:
  More prinout in unit test of PageMan
ndb/src/kernel/blocks/dbtup/DbtupPagMan.cpp:
  Reserve 2 pages to use for SR
ndb/src/kernel/blocks/dbtup/DbtupSystemRestart.cpp:
  Don't alloc using "normal" allocConsPages when allocating for
  0-pages during SR, instead use 2 reserved pages

testInterpreter is no longer built

Added NDB_DEBUG(--with-debug) and NDB_DEBUG_FULL(--with-debug=full)



configure.in:
  Added NDB_DEBUG(--with-debug) and NDB_DEBUG_FULL(--with-debug=full)

libmysql/libmysql.c:
  Cleanup of conversion part of libmysql (prepared statements protocol):
  - now we have basic support for any conversion sequence:
    when we don't implement direct conversion of given value to requested 
    buffer type (i.e. time -> double, or the other way around) we
    first convert i.e. time -> string and then call string -> double 
    conversion.
    param->offset is now handled only in one place.
  - conversion functions renamed from send_data_{string, long, double}
    to fetch_{string,long,double}_with_conversion. Don't be confused
    with strange diff for send_data_long: I had to move send_data_string
    before all other sends as it's used inside thesm. (Shall we have
    a forward declaration instead?-)
  - a little cleanup in read_binary_{date,time,datetime} - now type of
    date value is set inside these functions, so we can be sure
    that we always return fully filled MYSQL_TIME structure to the user
  - float -> string conversion is fixed to honor param->precision. 
    This is a step forward in fixing bug#4172
tests/client_test.c:
  test fix: now libmysql always sets MYSQL_TIME::time_type field.
  We need to set these fields in the test as later _in values are compared
  with canonical by plain memcmp.

on OSCON)

ndb/src/cw/cpcd/Makefile.am:
  Put cpcd in libexec
ndb/src/cw/cpcd/Process.cpp:
  Fixed reverse check with ulimit
ndb/test/run-test/main.cpp:
  Restart mgm server aswell on test failure.
  Removes problems with nodeid

into eel.hemma.oreland.se:/ndb/clone-mysql-4.1-ndb-daily-2004-08-04

Currently one needs 636*1.6*2*noOfReplicas + 184 bytes per record
which amounts to about 4200 bytes per record. The 2 is a bug which
is fixed here as well, noOfReplicas is removed, it was there for
concurrent transactions but it is better to focus on supporting one
large transaction in the cluster. Also decreasing the safety factor
from 1.6 to 1.1.

Also removing unused parameters.

into eel.hemma.oreland.se:/ndb/clone-mysql-4.1-ndb-daily-2004-08-04


BitKeeper/etc/logging_ok:
  Logging to logging@openlogging.org accepted

into mysql.com:/home/jonas/src/mysql-4.1-ndb

into neptunus.(none):/home/magnus/mysql-4.1

Added NDBCLUSTER to table types which does not support generate. 
Added test case for truncate.


sql/handler.h:
  Add NDBCLUSTER to table types that does not support generate.

Check if there are any operations pending that needs to be taken over to the updating/deleting transaction before closing the scan 


sql/ha_ndbcluster.cc:
  Check ops_pending if there are operations to take over before closing the scan

into mysql.com:/home/jonas/src/mysql-4.1-ndb