Bug #59055 : Remove ndb tests from repository. Removal of tests from sys_vars is pending. It has some issues that are yet to be resolved

Major replication test framework cleanup. This does the following:
 - Ensure that all tests clean up the replication state when they
   finish, by making check-testcase check the output of SHOW SLAVE STATUS.
   This implies:
    - Slave must not be running after test finished. This is good
      because it removes the risk for sporadic errors in subsequent
      tests when a test forgets to sync correctly.
    - Slave SQL and IO errors must be cleared when test ends. This is
      good because we will notice if a test gets an unexpected error in
      the slave threads near the end.
    - We no longer have to clean up before a test starts.
 - Ensure that all tests that wait for an error in one of the slave
   threads waits for a specific error. It is no longer possible to
   source wait_for_slave_[sql|io]_to_stop.inc when there is an error
   in one of the slave threads. This is good because:
    - If a test expects an error but there is a bug that causes
      another error to happen, or if it stops the slave thread without
      an error, then we will notice.
    - When developing tests, wait_for_*_to_[start|stop].inc will fail
      immediately if there is an error in the relevant slave thread.
      Before this patch, we had to wait for the timeout.
 - Remove duplicated and repeated code for setting up unusual replication
   topologies. Now, there is a single file that is capable of setting
   up arbitrary topologies (include/rpl_init.inc, but
   include/master-slave.inc is still available for the most common
   topology). Tests can now end with include/rpl_end.inc, which will clean
   up correctly no matter what topology is used. The topology can be
   changed with include/rpl_change_topology.inc.
 - Improved debug information when tests fail. This includes:
    - debug info is printed on all servers configured by include/rpl_init.inc
    - User can set $rpl_debug=1, which makes auxiliary replication files
      print relevant debug info.
 - Improved documentation for all auxiliary replication files. Now they
   describe purpose, usage, parameters, and side effects.
 - Many small code cleanups:
    - Made have_innodb.inc output a sensible error message.
    - Moved contents of rpl000017-slave.sh into rpl000017.test
    - Added mysqltest variables that expose the current state of
      disable_warnings/enable_warnings and friends.
    - Too many to list here: see per-file comments for details.

Additional space-in-directory-name protection.

The 'mysql' include sub-directory was copied directly into
include/ rather than retaining its own directory.

Fix this, and update mysql_config which needs additional
logic to detect the correct prefix for includes.

@prefix@ was erroneously set to '.' with the STANDALONE install
layout, when it should instead be set to CMAKE_INSTALL_PREFIX,
this was likely accidentally copied from scripts/CMakeLists.txt
which has similar handling specifically for mysql_install_db.sh

mysql.server init script can now find the install, assuming the
defaults have been chosen.

           in sql_select.cc

Follow-up patch. Add sanity check for quick select when it is
decided that it should be used.

           make_join_select() in sql_select.cc

Caused by incorrect ASSERT introduced by BUG#58456. Quick selects 
may have index == MAX_KEY if it merges indices.

Fixed that proxy_user may be used uninitialized.

Automerge from mysql-5.1-bugteam.

Post-push fixes:

  - fixed platform dependent result files
  - appeasing valgrind warnings:
   
    Fault injection was also uncovering a previously existing 
    potential mem leaks. For BUG#46166 testing purposes, fixed 
    by forcing handling the leak when injecting faults.

Merging to latest mysql-5.5-bugteam.

Merging to latest mysql-5.1-bugteam.

            in opt_range.h

In this bug, there are two alternative access plans: 
 * Index merge range access
 * Const ref access

best_access_path() decided that the ref access was preferrable, 
but make_join_select() still decided to point 
SQL_SELECT::quick to the index merge because the table had 
type==JT_CONST which was not handled. 

At the same time the table's ref.key still referred to the 
index the ref access would use indicating that ref access 
should be used. In this state, different parts of the 
optimizer code have different perceptions of which access path
is in use (ref or range).

test_if_skip_sort_order() was called to check if the ref access
needed ordering, but test_if_skip_sort_order() got confused and
requested the index merge to return records in sorted order. 
Index merge cannot do this, and fired an ASSERT.

The fix is to take join_tab->type==JT_CONST into concideration
when make_join_select() decides whether or not to use the 
range access method.

           temptable views

The TABLE::key_read field indicates if the optimizer has found that row
retrieval only should access the index tree. The triggered assert
inside close_thread_table() checks that this field has been reset when
the table is about to be closed.

During normal execution, these fields are reset right before tables are
closed at the end of mysql_execute_command(). But in the case of errors,
tables are closed earlier. The patch for Bug#52044 refactored the open
tables code so that close_thread_tables() is called immediately if
opening of tables fails. At this point in the execution, it could
happend that all TABLE::key_read fields had not been properly reset,
therefore triggering the assert.

The problematic statement in this case was EXPLAIN where the query
accessed two derived tables and where the first derived table was
processed successfully while the second derived table was not.
Since it was an EXPLAIN, TABLE::key_read fields were not reset after
successful derived table processing since the state needs to be 
accessible afterwards. When processing of the second derived table
failed, it's corresponding SELECT_LEX_UNIT was cleaned, which caused
it's TABLE::key_read fields to be reset. Since processing failed,
the error path of open_and_lock_tables() was entered and
close_thread_tables() was called. The assert was then triggered due
to the TABLE::key_read fields set during processing of the first
derived table.

This patch fixes the problem by adding a new derived table processor,
mysql_derived_cleanup() that is called after mysql_derived_filling().
It causes cleanup of all SELECT_LEX_UNITs to be called, resetting
all relevant TABLE::key_read fields.

Test case added to derived.test.

Allow users to build without aio if they really want to, by passing
-DIGNORE_AIO_CHECK to cmake.

The problem is a race between a session closing its vio
(i.e. after a COM_QUIT) at the same time it is being killed by
another thread. This could trigger a assertion in vio_close()
as the two threads could end up closing the same vio, at the
same time. This could happen due to the implementation of
SIGNAL_WITH_VIO_CLOSE, which closes the vio of the thread
being killed.

The solution is to serialize the close of the Vio under
LOCK_thd_data, which protects THD data.

No regression test is added as this is essentially a debug
issue and the test case would be quite convoluted as we would
need to synchronize a session that is being killed -- which
is a bit difficult since debug sync points code does not
synchronize killed sessions.

The MYSQL_LOG::open member function does not take a PSI
key file argument when the PSI interface is not present.

automatically to place a dependency on the VERSION file.

           option for specific compilers

Reorganize the maintainer mode cmake code to allow options
for specific compilers. For now, enable -Wcheck for ICC,
but do not turn warnings into errors.

initialization to specific functions. Also, remove a large
block of white space. There shouldn't be any functional
change.

Problem: when inserting supplementary characters to an UCS2 column,
character was silently shrinked to 16-bit value.

Fix: produce a warning on attempt to insert a supplementary character,
and convert to question mark.

  @ mysql-test/r/ctype_many.result
  @ mysql-test/t/ctype_many.test
  Adding tests

  @ strings/ctype-ucs2.c
  Check if wc is greater than the highest value supported (0xFFFF),
  return MY_CS_ILUNI if true.