> ------------------------------------------------------------
> revno: 3148.13.3
> revision-id: svoj@sun.com-20091102144140-8de1z6mdy5dopw3j
> parent: svoj@sun.com-20091102143655-lo69f57p82nky58q
> committer: Sergey Vojtovich <svoj@sun.com>
> branch nick: mysql-5.1-bugteam
> timestamp: Mon 2009-11-02 18:41:40 +0400
> message:
>   Applying InnoDB snashot 5.1-ss6129
>   
>   Detailed revision comments:
>   
>   r6045 | jyang | 2009-10-08 02:27:08 +0300 (Thu, 08 Oct 2009) | 7 lines
>   branches/5.1: Fix bug #47777. Treat the Geometry data same as
>   Binary BLOB in ha_innobase::store_key_val_for_row(), since the
>   Geometry data is stored as Binary BLOB in Innodb.
>   
>   Review: rb://180 approved by Marko Makela.

> ------------------------------------------------------------
> revno: 1810.3961.7
> committer: Georgi Kodinov <joro@sun.com>
> branch nick: B48291-5.0-bugteam
> timestamp: Fri 2009-10-30 15:15:43 +0200
> message:
>   Bug #48291 : crash with row() operator,select into @var, and
>     subquery returning multiple rows
>
>   Error handling was missing when handling subqueires in WHERE
>   and when assigning a SELECT result to a @variable.
>   This caused crash(es).
>
>   Fixed by adding error handling code to both the WHERE
>   condition evaluation and to assignment to an @variable.
> ------------------------------------------------------------

> ------------------------------------------------------------
> revno: 1810.3964.1
> revision-id: alexey.kopytov@sun.com-20091030155453-0vlfwki805h9os62
> parent: joerg@mysql.com-20091016122941-rf6z0keqvmlgjfto
> committer: Alexey Kopytov <Alexey.Kopytov@Sun.com>
> branch nick: my50-bug48131
> timestamp: Fri 2009-10-30 18:54:53 +0300
> message:
>   Bug #48131: crash group by with rollup, distinct, filesort,
>               with temporary tables
>   
>   There were two problems the test case from this bug was
>   triggering:
>   
>   1. JOIN::rollup_init() was supposed to wrap all constant Items
>   into another object for queries with the WITH ROLLUP modifier
>   to ensure they are never considered as constants and therefore
>   are written into temporary tables if the optimizer chooses to
>   employ them for DISTINCT/GROUP BY handling.
>   
>   However, JOIN::rollup_init() was called before
>   make_join_statistics(), so Items corresponding to fields in
>   const tables could not be handled as intended, which was
>   causing all kinds of problems later in the query execution. In
>   particular, create_tmp_table() assumed all constant items
>   except "hidden" ones to be removed earlier by remove_const()
>   which led to improperly initialized Field objects for the
>   temporary table being created. This is what was causing crashes
>   and valgrind errors in storage engines.
>   
>   2. Even when the above problem had been fixed, the query from
>   the test case produced incorrect results due to some
>   DISTINCT/GROUP BY optimizations being performed by the
>   optimizer that are inapplicable in the WITH ROLLUP case.
>   
>   Fixed by disabling inapplicable DISTINCT/GROUP BY optimizations
>   when the WITH ROLLUP modifier is present, and splitting the
>   const-wrapping part of JOIN::rollup_init() into a separate
>   method which is now invoked after make_join_statistics() when
>   the const tables are already known.

> ------------------------------------------------------------
> revno: 1810.3961.6
> revision-id: joro@sun.com-20091030094044-quadg0bwjy7cwqzw
> parent: joro@sun.com-20091029152429-ks55fhrp4lhknyij
> committer: Georgi Kodinov <joro@sun.com>
> branch nick: B48293-5.0-bugteam
> timestamp: Fri 2009-10-30 11:40:44 +0200
> message:
>   Bug #48293: crash with procedure analyse, view with > 10 columns,
>   having clause...
>   
>   The fix for bug 46184 was not very complete. It was not covering
>   views using temporary tables and multiple tables in a FROM clause.
>   Fixed by reverting the fix for 46184 and making a more general
>   check that is checking at the right execution stage and for all
>   of the non-supported cases.
>   Now PROCEDURE ANALYZE on non-top level SELECT is also forbidden.
>   Updated the analyse.test and subselect.test accordingly.

> ------------------------------------------------------------
> revno: 1810.3961.12
> revision-id: li-bing.song@sun.com-20091103090041-zj7nedx6ok5jgges
> parent: davi.arnaut@sun.com-20091102201021-1brn7cjb1kvqg9gr
> committer: <Li-Bing.Song@sun.com>
> branch nick: mysql-5.0-bugteam
> timestamp: Tue 2009-11-03 17:00:41 +0800
> message:
>   BUG#48216 Replication fails on all slaves after upgrade to 5.0.86 on master
>   
>   When a sessione is closed, all temporary tables of the session are automatically 
>   dropped and are binlogged. But it will be binlogged with wrong database names when
>   the length of the temporary tables' database names are greater than the 
>   length of the current database name or the current database is not set.
>   
>   Query_log_event's db_len is forgot to set when Query_log_event's db is set.
>   This patch wrote code to set db_len immediately after db has set.

> ------------------------------------------------------------
> revno: 1810.3959.6
> revision-id: joro@sun.com-20091021084345-iki6z0uceieoupey
> parent: ramil@mysql.com-20091023112648-gie6o3odj57cxh1e
> committer: Georgi Kodinov <joro@sun.com>
> branch nick: B47780-5.0-bugteam
> timestamp: Wed 2009-10-21 11:43:45 +0300
> message:
>   Bug #47780: crash when comparing GIS items from subquery
>         
>   If the first argument to GeomFromWKB function is a geometry
>   field then the function just returns its value.
>   However in doing so it's not preserving first argument's 
>   null_value flag and this causes unexpected null value to
>   be returned to the calling function.
>         
>   Fixed by updating the null_value of the GeomFromWKB function
>   in such cases (and all other cases that return a NULL e.g.
>   because of not enough memory for the return buffer).

> ------------------------------------------------------------
> revno: 1810.3959.5
> revision-id: ramil@mysql.com-20091023112648-gie6o3odj57cxh1e
> parent: ramil@mysql.com-20091021090408-208mvwwrcroi2j8c
> committer: Ramil Kalimullin <ramil@mysql.com>
> branch nick: b48258-5.0-bugteam
> timestamp: Fri 2009-10-23 16:26:48 +0500
> message:
>   Fix for bug#48258: Assertion failed when using a spatial index
>   
>   Problem: involving a spatial index for "non-spatial" queries
>   (that don't containt MBRXXX() functions) may lead to failed assert.
>   
>   Fix: don't use spatial indexes in such cases.

> ------------------------------------------------------------
> revno: 1810.3959.4
> revision-id: ramil@mysql.com-20091021090408-208mvwwrcroi2j8c
> parent: azundris@mysql.com-20091021033856-ydodp4q42o58e7ka
> committer: Ramil Kalimullin <ramil@mysql.com>
> branch nick: b47019-5.0-bugteam
> timestamp: Wed 2009-10-21 14:04:08 +0500
> message:
>   Fix for bug#47019: Assertion failed: 0, file .\rt_mbr.c, 
>   line 138 when forcing a spatial index
>   
>   Problem: "Spatial indexes can be involved in the search 
>   for queries that use a function such as MBRContains() 
>   or MBRWithin() in the WHERE clause".
>   Using spatial indexes for JOINs with =, <=> etc.
>   predicates is incorrect.
>   
>   Fix: disable spatial indexes for such queries.

The pthread_cond_wait implementations for windows might
dead lock in some rare circumstances.

1) One thread (I) enter a timed wait and at a point in
   time ends up after mutex unlock and before
   WaitForMultipleObjects(...)
2) Another thread (II) enters pthread_cond_broadcast.
   Grabs the mutex and discovers one waiter. It set
   the broadcast event and closes the broadcast gate
   then unlocks the mutex.
3) A third thread (III) issues a pthread_cond_signal.
   It grabs the mutex, discovers one waiter, sets the
   signal event then unlock the mutex.
4) The first threads (I) enters WaitForMultipleObjects
   and finds out that the signal object is in a
   signalled state and exits the wait.
5) Thread (I) grabs the mutex and checks result status.
   The number of waiters is decreased and becomes equal
   to 0. The event returned was a signal event so the
   broadcast gate isn't opened. The mutex is released.
6) Thread (II) issues a new broadcast. The mutex is
   acquired but the number of waiters are 0 hence
   the broadcast gate remains closed.
7) Thread (I) enters the wait again but is blocked by
   the broadcast gate.

      This fix resolves the above issue by always resetting
      broadcast gate when there are no more waiters in th queue.


mysys/my_wincond.c:
  * Always reset the broadcast gate if there are no more waiters left.

Mask part of EXPLAIN output with '#' to account for varying row count estimation.

mysql-test/include/mix1.inc:
  Mask 'rows' column in EXPLAIN output (number varies sometimes between 1 and 2).
mysql-test/r/innodb_mysql.result:
  Update result file after masking of rows estimation in EXPLAIN output.

1. BUG#46256 - drop table with unknown collation crashes innodb

Note: No testcase attached and has to be verified manually

Detailed revision comments:

r5799 | calvin | 2009-09-09 20:47:31 +0300 (Wed, 09 Sep 2009) | 10 lines
branches/5.1: fix bug#46256

Allow tables to be dropped even if the collation is not found,
but issue a warning.

Could not find an easy way to add mysql-test since it requires
changes to charsets and restarting the server. Tests were
executed manually.

Approved by: Heikki (on IM)
r5805 | vasil | 2009-09-10 08:41:48 +0300 (Thu, 10 Sep 2009) | 7 lines
branches/5.1:

Fix a compilation warning caused by c5799:

handler/ha_innodb.cc: In function 'void innobase_get_cset_width(ulint, ulint*, ulint*)':
handler/ha_innodb.cc:830: warning: format '%d' expects type 'int', but argument 2 has type 'ulint'

BUG#44369 - InnoDB: Does not uniformly disallow disallowed column names

Detailed revision comments:

r5741 | jyang | 2009-09-03 07:16:01 +0300 (Thu, 03 Sep 2009) | 5 lines
branches/5.1: Block creating table with column name conflicting
with Innodb reserved key words. (Bug #44369) rb://151 approved
by Sunny Bains.


r5760 | jyang | 2009-09-04 07:07:34 +0300 (Fri, 04 Sep 2009) | 3 lines
branches/5.1: This is to revert change 5741. A return status for
create_table_def() needs to be fixed.

r5834 | jyang | 2009-09-11 00:43:05 +0300 (Fri, 11 Sep 2009) | 5 lines
branches/5.1: Block creating table with column name conflicting
with Innodb reserved key words. (Bug #44369) rb://151 approved
by Sunny Bains.

1. BUG#46000 - using index called GEN_CLUST_INDEX crashes server

Detailed revision comments:

r5895 | jyang | 2009-09-15 03:39:21 +0300 (Tue, 15 Sep 2009) | 5 lines
branches/5.1: Disallow creating index with the name of
"GEN_CLUST_INDEX" which is reserved for the default system
primary index. (Bug #46000) rb://149 approved by Marko Makela.

SELECT ... WHERE ... IN (NULL, ...) does full table scan,
even if the same query without the NULL uses efficient range scan.

The bugfix for the bug 18360 introduced an optimization:
if
  1) all right-hand arguments of the IN function are constants
  2) result types of all right argument items are compatible
     enough to use the same single comparison function to
     compare all of them to the left argument,

then

  we can convert the right-hand list of constant items to an array
  of equally-typed constant values for the further
  QUICK index access etc. (see Item_func_in::fix_length_and_dec()).

The Item_null constant item objects have STRING_RESULT
result types, so, as far as Item_func_in::fix_length_and_dec()
is aware of NULLs in the right list, this improvement efficiently
optimizes IN function calls with a mixed right list of NULLs and
string constants. However, the optimization doesn't affect mixed
lists of NULLs and integers, floats etc., because there is no
unique common comparator.


New optimization has been added to ignore the result type
of NULL constants in the static analysis of mixed right-hand lists.
This is safe, because at the execution phase we care about
presence of NULLs anyway.

1. The collect_cmp_types() function has been modified to optionally
   ignore NULL constants in the item list.
2. NULL-skipping code of the Item_func_in::fix_length_and_dec()
   function has been modified to work not only with in_string
   vectors but with in_vectors of other types.


mysql-test/r/func_in.result:
  Added test case for the bug #44139.
mysql-test/t/func_in.test:
  Added test case for the bug #44139.
sql/item_cmpfunc.cc:
  Bug #44139: Table scan when NULL appears in IN clause
  
  1. The collect_cmp_types() function has been modified to optionally
     ignore NULL constants in the item list.
  2. NULL-skipping code of the Item_func_in::fix_length_and_dec()
     function has been modified to work not only with in_string
     vectors but with in_vectors of other types.

rpl.rpl_trigger.test fails with valgrind errors with the innodb plugin

The problem is that there is only one autoinc value associated with 
the query when binlogging. If more than one autoinc values are used 
in the query, the autoinc values after the first one can be inserted 
wrongly on slave. So these autoinc values can become inconsistent on 
master and slave.

The problem is resolved by marking all the statements that invoke 
a trigger or call a function that updated autoinc fields as unsafe, 
and will switch to row-format in Mixed mode. Actually, the statement 
is safe if just one autoinc value is used in sub-statement, but it's 
impossible to check how many autoinc values are used in sub-statement.)

mysql-test/suite/rpl/r/rpl_auto_increment_update_failure.result:
  Test result for bug#45677
mysql-test/suite/rpl/t/rpl_auto_increment_update_failure.test:
  Added test to verify the following two properties:
  P1) insert/update in an autoinc column causes statement to 
  be logged in row format if binlog_format=mixed
  P2) if binlog_format=mixed, and a trigger or function contains 
      two or more inserts/updates in a table that has an autoinc 
      column, then the slave should not go out of sync, even if 
      there are concurrent transactions.
sql/sql_base.cc:
  Added function 'has_write_table_with_auto_increment' to check 
  if one (or more) write tables have auto_increment columns.
  
  Removed function 'has_two_write_locked_tables_with_auto_increment', 
  because the function is included in function 
  'has_write_table_with_auto_increment'.

                    Removes the need of a hack (the jump to label).