Original changeset:
------------------------------------------------------------
revno: 2626
committer: davi@mysql.com/endora.local
timestamp: Wed 2008-04-23 09:33:25 -0300
message:
Fix for main.ssl and main.ssl_compress test case failures under pool-of-threads.

The problem is that the SSL layer has a read buffer and might read
more data than requested by the VIO layer. The SSL layer empties the
socket buffer which causes the socket to not be signaled for IO if
the client is waiting for a command which is sitting in the read
buffer.

The solution is to retrieve from the transport layer the number of
bytes waiting in the read buffer. The data in the read buffer needs
to be processed before waiting for more data.

 inside a stored routine" from 6.0-codebase.

------------------------------------------------------------
revno: 2597.42.4
committer: davi@mysql.com/endora.local
timestamp: Tue 2008-04-15 17:29:42 -0300
message:
Bug#36004 mysql_stmt_prepare resets the list of warnings

Although the manual says that "the list of messages is reset
for each new statement that uses a table", the list of messages
is being unconditionally reset for prepare commands.

The solution is to enforce that the prepare command will only
reset the message list if the statement being prepared uses
a table or a warning is pushed.


tests/mysql_client_test.c:
  Add test case for Bug#36004

mysql-test/t/sp-error.test:
  Backport test of Bug#36510 (the bug itself is fixed by other
  backports, inc. SINGAL code).

------------------------------------------------------------
revno: 2572.23.1
committer: davi@mysql.com/endora.local
timestamp: Wed 2008-03-19 09:03:08 -0300
message:
Bug#17954 Threads_connected > Threads_created

The problem is that insert delayed threads are counted as connected
but not as created, leading to a Threads_connected value greater then
the Threads_created value.

The solution is to enforce the documented behavior that the
Threads_connected value shall be the number of currently
open connections and that Threads_created shall be the
number of threads created to handle connections.


mysql-test/r/status.result:
  Add test case result for Bug#17954
mysql-test/t/status.test:
  Add test case for Bug#17954
sql/mysqld.cc:
  Change Threads_connected to reflect the number of
  open connections. SHOW_INT type variables are not
  reset.

------------------------------------------------------------
revno: 2476.1116.1
committer: davi@mysql.com/endora.local
timestamp: Fri 2007-12-14 10:10:19 -0200
message:
DROP TABLE under LOCK TABLES simultaneous to a FLUSH TABLES
WITH READ LOCK (global read lock) can lead to a deadlock.

The solution is to not wait for the global read lock if the
thread is holding any locked tables.

Related to bugs 23713 and 32395. This issues is being fixed
only on 6.0 because it depends on the fix for bug 25858 --
which was fixed only on 6.0.

------------------------------------------------------------
revno: 2476.784.3
committer: davi@moksha.local
timestamp: Tue 2007-10-02 21:27:31 -0300
message:
Bug#25858 Some DROP TABLE under LOCK TABLES can cause deadlocks
        
When a client (connection) holds a lock on a table and attempts to
drop (obtain a exclusive lock) on a second table that is already
held by a second client and the second client then attempts to
drop the table that is held by the first client, leads to a
circular wait deadlock. This scenario is very similar to trying to
drop (or rename) a table while holding read locks and are
correctly forbidden.
        
The solution is to allow a drop table operation to continue only
if the table being dropped is write (exclusively) locked, or if
the table is temporary, or if the client is not holding any
locks. Using this scheme prevents the creation of a circular
chain in which each client is waiting for one table that the
next client in the chain is holding.
            
This is incompatible change, as can be seen by number of tests
cases that needed to be fixed, but is consistent with respect to
behavior of the different scenarios in which the circular wait
might happen.

mysql-test/r/drop.result:
  Test case result for Bug#25858
mysql-test/r/group_by.result:
  Fix test case result wrt drop table under lock tables -- unlock tables
  before dropping table.
mysql-test/r/insert_notembedded.result:
  Fix test case result wrt drop table under lock tables -- unlock tables
  before dropping table
mysql-test/r/lock.result:
  Fix test case result wrt drop table under lock tables -- unlock tables
  before dropping table.
mysql-test/r/lock_multi.result:
  Fix test case result wrt drop table under lock tables -- unlock tables
  before dropping table.
mysql-test/r/myisam.result:
  Fix test case result wrt drop table under lock tables -- unlock tables
  before dropping table.
mysql-test/r/view.result:
  Fix test case result wrt drop table under lock tables -- unlock tables
  before dropping table.
mysql-test/t/drop.test:
  Add test case for Bug#25858
mysql-test/t/group_by.test:
  Fix test case: unlock tables in preparation for a drop table. In some
  circumstances, dropping tables while holding locks leads to a deadlock.
mysql-test/t/insert_notembedded.test:
  Fix test case: unlock tables in preparation for a drop table. In some
  circumstances, dropping tables while holding locks leads to a deadlock.
mysql-test/t/lock.test:
  Fix test case: unlock tables in preparation for a drop table. In some
  circumstances, dropping tables while holding locks leads to a deadlock.
mysql-test/t/lock_multi.test:
  Fix test case: unlock tables in preparation for a drop table. In some
  circumstances, dropping tables while holding locks leads to a deadlock.
mysql-test/t/myisam.test:
  Fix test case: unlock tables in preparation for a drop table. In some
  circumstances, dropping tables while holding locks leads to a deadlock.
mysql-test/t/query_cache_notembedded.test:
  Fix test case: unlock tables in preparation for a drop table. In some
  circumstances, dropping tables while holding locks leads to a deadlock.
mysql-test/t/view.test:
  Fix test case: unlock tables in preparation for a drop table. In some
  circumstances, dropping tables while holding locks leads to a deadlock.
sql/lock.cc:
  When trying to obtain a name lock under lock tables, ensure that the table is properly exclusively locked and fail otherwise.

revno: 2476.784.2
committer: davi@moksha.local
timestamp: Thu 2007-09-27 16:56:27 -0300 
message:
Bug#28870 check that table locks are released/reset
    
The problem is that some mysql_lock_tables error paths are not
resetting the tables lock type back to TL_UNLOCK. If the lock
types are not reset properly, a table might be returned to the
table cache with wrong lock_type.
      
The proposed fix is to ensure that the tables lock type is always
properly reset when mysql_lock_tables fails. This is a
incompatible change with respect to the process state information.


sql/lock.cc:
  Merge mysql_lock_tables cleanup sequence and the reset_lock_data
  function into a single function and take steps to ensure it is
  always called for each error exit path. Also remove references
  to the redundant THD::locked variable which was almost exclusively
  used by this function and the same information is already on proc_info.
sql/sql_class.cc:
  Remove references to the THD::locked variable.
sql/sql_class.h:
  Remove the THD::locked variable.
sql/sql_show.cc:
  Remove references to THD:locked, state_info will now default to proc_info.

mysql-test/r/sp-error.result:
  Update test case result.
mysql-test/t/dirty_close.test:
  Dirty close does not work under embedded.
mysql-test/t/sp-error.test:
  Use the specific error number so it won't catch
  other non-fatal errors.

      
Just change mysql_foo to mysql_cv_foo for one cache-id variable name.  There
was only one bad variable name, present in 5.0 and 5.1, but not in the -pe
branch.


Backported to 5.6.0  (mysql-next-mr-runtime)

           STRING_RESULT argument

There is a "magic" number for precision : NOT_FIXED_DEC. 
This means that the precision is not a fixed number.
But this constant was re-defined in several files and 
was not available to the UDF developers.
 
Moved the NOT_FIXED_DEC definition to the correct header
and removed the redundant definitions.

Backported to 5.6.0  (mysql-next-mr-runtime)

client/sql_string.h:
  moved NOT_FIXED_DEC to the correct header
include/mysql_com.h:
  moved NOT_FIXED_DEC to the correct header
libmysql/libmysql.c:
  moved NOT_FIXED_DEC to the correct header
sql/field.h:
  moved NOT_FIXED_DEC to the correct header
sql/sql_string.h:
  moved NOT_FIXED_DEC to the correct header
storage/ndb/include/kernel/signaldata/DictTabInfo.hpp:
  moved NOT_FIXED_DEC to the correct header

Add result file format v2

Backport to 5.6.0   

Add support for being prompted for new passwords by mysqladmin instead of
specifying them on the command line. (Bug #5724, patch by Harrison Fisk)

(From: gkodinov)
Use and int * where possible to scan for trailing space in a
string instead of always iterating char-by-char.
Using the attached benchmark file on a 32 bit Intel Core 2 
Duo CPU I've got 43485 ms run with the fix compared to 44373 
without it.

Backported to 5.6.0 (next-mr-runtime)
6.0-codebase revid: 2476.1362.1


include/m_string.h:
  scan for space through ints
strings/ctype-bin.c:
  scan for space through ints
strings/ctype-latin1.c:
  scan for space through ints
strings/ctype-mb.c:
  scan for space through ints
strings/ctype-simple.c:
  scan for space through ints

is invalid to preporcessor conditionals. Instead use
the autoconf generated macro to test the presence.

  In fact this crashes in normal (not embedded) run also.
  The problem is in the memory mapping. Handling the ha_myisammrg::extra(MMAP)
  the MERGE engine tries to mmap all the tables it unites.
  Though some can be empty and then in the mi_dynmap_file()
  we call the my_mmap(0). Normally this call returns MAP_FAILED,
  but not on FreeBSD. There it returns like a 'normal' value,
  and after the consequitive munmap systems gets unstable and
  crashes on some system call later.

per-file comments:
  storage/myisam/mi_dynrec.c
Bug #47139      Test "merge" crashes in "embedded" run
    don't try to mmap zero-length area, just return at once.

   The additional patch. That 'loadxml.test' failure was actually about our testing system,
   not the code.
   Firstly we need a new mysqltest command, wich i called 'send_eval'. So the expression
   can be evaluated, then started in a parallel thread. We only have separane 'send' and
   'eval' commands at the moment.
   Then we need to add the waiting code after the 'KILL' to our test, so the thread will be killed
   before the test goes further. The present 'reap' command doesn't handle the killed threads
   well.
      
per-file comments:
  client/mysqltest.cc
Bug#42520      killing load .. infile Assertion failed: ! is_set(), file .\sql_error.cc, line 8
    The 'send_eval' command implemented.

  mysql-test/r/loadxml.result
Bug#42520      killing load .. infile Assertion failed: ! is_set(), file .\sql_error.cc, line 8
   test result updated.

  mysql-test/t/loadxml.test
Bug#42520      killing load .. infile Assertion failed: ! is_set(), file .\sql_error.cc, line 8
   test case added.

------------------------------------------------------------
revno: 3405
revision-id: davi.arnaut@sun.com-20090626124624-m4wolyo5193j4cu7
parent: luis.soares@sun.com-20090626113019-1j4mn1jos480u9f3
committer: Davi Arnaut <Davi.Arnaut@Sun.COM>
branch nick: mysql-pe
timestamp: Fri 2009-06-26 09:46:24 -0300
message:
  Bug#45767: deprecate/remove Field::pack_key, Field::unpack_key, Field::pack_cmp
  
  Remove unused and dead code.
  
  Parts of the patch contributed by Zardosht Kasheff

------------------------------------------------------------
revno: 2476.784.4
revision-id: sp1r-davi@moksha.local-20071008114751-46069
parent: sp1r-davi@moksha.local-20071003002731-48537
committer: davi@moksha.local
timestamp: Mon 2007-10-08 08:47:51 -0300
message:
  Bug#27249 table_wild with alias: select t1.* as something

  Aliases to table wildcards are silently ignored, but they should
  not be allowed as it is non-standard and currently useless. There
  is not point in having a alias to a wildcard of column names.

  The solution is to rewrite the select_item rule so that aliases
  for table wildcards are not accepted.

  Contribution by Martin Friebe

mysql-test/r/alias.result:
  Add test case result for Bug#27249
mysql-test/t/alias.test:
  Add test case for Bug#27249
sql/sql_yacc.yy:
  Split up select_item rule so that aliases for table wildcards
  are not accepted by the parser.

------------------------------------------------------------
revno: 2597.4.17
revision-id: sp1r-davi@mysql.com/endora.local-20080328174753-24337
parent: sp1r-anozdrin/alik@quad.opbmk-20080328140038-16479
committer: davi@mysql.com/endora.local
timestamp: Fri 2008-03-28 14:47:53 -0300
message:
  Bug#15192 "fatal errors" are caught by handlers in stored procedures

  The problem is that fatal errors (e.g.: out of memory) were being
  caught by stored procedure exception handlers which could cause
  the execution to not be stopped due to a continue handler.

  The solution is to not call any exception handler if the error is
  fatal and send the fatal error to the client.

mysql-test/r/sp-error.result:
  Add test case result for Bug#15192
mysql-test/t/sp-error.test:
  Add test case for Bug#15192
mysys/my_alloc.c:
  Pass flag to signal fatal error in memory root allocations.
sql/event_data_objects.cc:
  Use init_sql_alloc to initialize memory roots, which uses
  the sql error handler to push errors.
sql/ha_partition.cc:
  Pass flag to signal fatal error instead of calling fatal_error.
sql/item_func.cc:
  Pass flag to signal fatal error instead of calling fatal_error.
sql/item_subselect.cc:
  Remove redundant fatal error, memory root already pushes error.
sql/opt_sum.cc:
  Pass flag to signal fatal error instead of calling fatal_error.
sql/sp_head.cc:
  Allocator already sets fatal error.
sql/sql_class.h:
  A error must exist for it to be fatal. Pass flag to signal fatal
  error instead of calling fatal_error.
sql/sql_insert.cc:
  Pass flag to signal fatal error instead of calling fatal_error.
sql/sql_list.h:
  Pass flag to signal fatal error instead of calling fatal_error.
sql/sql_parse.cc:
  Pass flag to signal fatal error instead of calling fatal_error.
sql/sql_partition.cc:
  Pass flag to signal fatal error instead of calling fatal_error.
sql/sql_select.cc:
  Pass flag to signal fatal error instead of calling fatal_error.
sql/sql_servers.cc:
  Use init_sql_alloc to initialize memory roots, which uses
  the sql error handler to push errors.
sql/sql_show.cc:
  Pass flag to signal fatal error instead of calling fatal_error.
sql/sql_trigger.cc:
  Use init_sql_alloc to initialize memory roots, which uses
  the sql error handler to push errors.
sql/sql_update.cc:
  Pass flag to signal fatal error instead of calling fatal_error.
sql/tztime.cc:
  Use init_sql_alloc to initialize memory roots, which uses
  the sql error handler to push errors.

------------------------------------------------------------
revno: 3317
revision-id: davi.arnaut@sun.com-20090522170916-fzc5ca3tjs9roy1t
parent: patrick.crews@sun.com-20090522152933-ole8s3suy4zqyvku
committer: Davi Arnaut <Davi.Arnaut@Sun.COM>
branch nick: 41860-6.0
timestamp: Fri 2009-05-22 14:09:16 -0300
message:
  Bug#41860: Without Windows named pipe

  The problem was that the patch for Bug#10374 broke named pipe
  and shared memory transports on Windows due to a failure to
  implement a dummy poll method for transports other than BSD
  sockets. Another problem was that mysqltest lacked support
  for named pipe and shared memory connections, which lead to
  misleading test cases that were supposed run common queries
  over both transports.

  The solution is to properly implement, at the VIO layer, the
  poll and is_connected methods. The is_connected method is
  implemented for every suppported transport and the poll one
  only where it makes sense. Furthermore, support for named pipe
  and shared memory connections is added to mysqltest as to
  enable testing of both transports using the test suite.

client/mysqltest.cc:
  Add support for named pipe and shared memory connections.
include/violite.h:
  Move private functions to vio/vio_priv.h
  Add poll_read and is_connected methods.
mysql-test/t/named_pipe.test:
  Run tests over a named pipe connection.
mysql-test/t/shm.test:
  Run tests over a shared memory connection.
sql/item_func.cc:
  Rename method.
sql/sql_class.cc:
  Remove higher-level vio_is_connected implementation.
sql/sql_class.h:
  Rename vio_is_connected to not conflict with the vio one.
  Verify that there is a valid vio.
vio/vio.c:
  Add poll_read and is_connected methods.
vio/vio_priv.h:
  Add private functions.
vio/viosocket.c:
  Implement the is_connected method for the various transports.

------------------------------------------------------------
revno: 2597.37.3
revision-id: sp1r-davi@mysql.com/endora.local-20080328123626-16430
parent: sp1r-anozdrin/alik@quad.opbmk-20080327125300-11290
committer: davi@mysql.com/endora.local
timestamp: Fri 2008-03-28 09:36:26 -0300
message:
  Bug#10374 GET_LOCK does not let connection to close on the server side if it's aborted

  The problem is that the server doesn't detect aborted connections which
  are waiting on a lock or sleeping (user sleep), wasting system resources
  for a connection that is already dead.

  The solution is to peek at the connection every five seconds to verify if
  the connection is not aborted. A aborted connection is detect by polling
  the connection socket for available data to be read or end of file and in
  case of eof, the wait is aborted and the connection killed.

include/violite.h:
  Export vio_peek_read function.
mysql-test/r/dirty_close.result:
  Add test case result for Bug#10374
mysql-test/t/dirty_close.test:
  Add test case for Bug#10374
sql/item_func.cc:
  While waiting for a condition to be signaled, check if the connection
  is not broken every INTERRUPT_INTERVAL seconds.
sql/sql_class.cc:
  Add function which checks if the client connection was aborted.
sql/sql_class.h:
  Add function prototype.
vio/viosocket.c:
  Add poll and peek functions for Windows and Unix.

------------------------------------------------------------
revno: 2572.2.1
revision-id: sp1r-davi@mysql.com/endora.local-20080227225948-16317
parent: sp1r-anozdrin/alik@quad.-20080226165712-10409
committer: davi@mysql.com/endora.local
timestamp: Wed 2008-02-27 19:59:48 -0300
message:
  Bug#27525 table not found when using multi-table-deletes with aliases over several databas
  Bug#30234 Unexpected behavior using DELETE with AS and USING

  The multi-delete statement has a documented limitation that
  cross-database multiple-table deletes using aliases are not
  supported because it fails to find the tables by alias if it
  belongs to a different database. The problem is that when
  building the list of tables to delete from, if a database
  name is not specified (maybe an alias) it defaults to the
  name of the current selected database, making impossible to
  to properly resolve tables by alias later. Another problem
  is a inconsistency of the multiple table delete syntax that
  permits ambiguities in a delete statement (aliases that refer
  to multiple different tables or vice-versa).

  The first step for a solution and proper implementation of
  the cross-databse multiple table delete is to get rid of any
  ambiguities in a multiple table statement. Currently, the parser
  is accepting multiple table delete statements that have no obvious
  meaning, such as:

  DELETE a1 FROM db1.t1 AS a1, db2.t2 AS a1;
  DELETE a1 AS a1 FROM db1.t1 AS a1, db2.t2 AS a1;

  The solution is to resolve the left part of a delete statement
  using the right part, if the a table on right has an alias,
  it must be referenced in the left using the given alias. Also,
  each table on the left side must match unambiguously only one
  table in the right side.

mysql-test/r/delete.result:
  Add test case result for Bug#27525 and Bug#21148
mysql-test/r/derived.result:
  Update error.
mysql-test/suite/rpl/r/rpl_multi_delete2.result:
  Update syntax.
mysql-test/suite/rpl/t/rpl_multi_delete2.test:
  Update syntax.
mysql-test/t/delete.test:
  Add test case for Bug#27525 and Bug#21148
mysql-test/t/derived.test:
  Update statement error, alias is properly resolved now.
sql/sql_parse.cc:
  Implement new algorithm for the resolution of alias in
  a multiple table delete statement.
sql/sql_yacc.yy:
  Rework multi-delete parser rules to not accept table alias
  for the table source list.
sql/table.h:
  Add flag to signal that the table has a alias set or
  that fully qualified table name was given.

sql/sql_cache.cc:
  Swap return value description.

------------------------------------------------------------
revno: 2630.2.13
revision-id: davi@mysql.com-20080612190452-cx6h7rm557bcq7sa
parent: davi@mysql.com-20080611124915-csejwrxfdga9upho
committer: Davi Arnaut <davi@mysql.com>
branch nick: 36785-6.0
timestamp: Thu 2008-06-12 16:04:52 -0300
message:
  Bug#36785: Wrong error message when group_concat() exceeds max length

  The problem is that when ER_CUT_VALUE_GROUP_CONCAT is elevated
  to a error, the message does not get updated with the number of
  cut lines when group_concat() exceeds max length.

  The solution is to modify the warning message to be more meaningful
  by giving the number of the line that was cut and to issue the warning
  for each line that is cut. This approach is inline with how other
  per-row truncated data warnings are issued avoids violating the warning
  internal interface.

mysql-test/suite/sys_vars/r/group_concat_max_len_func.result:
  Update result to reflect the new warning message
sql/share/errmsg.txt:
  Update warning message ER_CUT_VALUE_GROUP_CONCAT.

------------------------------------------------------------
revno: 2618
revision-id: sp1r-davi@mysql.com/endora.local-20080418131946-26951
parent: sp1r-davi@mysql.com/endora.local-20080417190810-26185
committer: davi@mysql.com/endora.local
timestamp: Fri 2008-04-18 10:19:46 -0300
message:
  Bug#32140: wrong error code caught when an SF() call is interruped with KILL query

  The problem is that killing a query which calls a stored function
  could return a wrong error (table corrupt) instead of the query
  interrupted error message.

  The solution is to not set the table corrupt error if the query
  is killed, the query interrupted error message will be set  later
  when the query is finished.

sql/sp.cc:
  Don't set a error if the thread was killed, the query
  interrupted error will be set later.

------------------------------------------------------------
revno: 2630.39.3
revision-id: davi.arnaut@sun.com-20081210215359-i876m4zgc2d6rzs3
parent: kostja@sun.com-20081208222938-9es7wl61moli71ht
committer: Davi Arnaut <Davi.Arnaut@Sun.COM>
branch nick: 36649-6.0
timestamp: Wed 2008-12-10 19:53:59 -0200
message:
  Bug#36649: Condition area is not properly cleaned up after stored routine invocation

  The problem is that the diagnostics area of a trigger is not
  isolated from the area of the statement that caused the trigger
  invocation. In MySQL terms, it means that warnings generated
  during the execution of the trigger are not removed from the
  "warning area" at the end of the execution.

  Before this fix, the rules for MySQL message list life cycle (see
  manual entry for SHOW WARNINGS) did not apply to statements
  inside stored programs:

    - The manual says that the list of messages is cleared by a
      statement that uses a table (any table). However, such
      statement, if run inside a stored program did not clear the
      message list.
    - The manual says that the list is cleared by a statement that
      generates a new error or a warning, but this was not the case
      with stored program statements either and is changed to be the
      case as well.

  In other words, after this fix, a statement has the same effect
  on the message list regardless of whether it's executed inside a
  stored program/sub-statement or not.

  This introduces an incompatible change:

    - before this fix, a, e.g. statement inside a trigger could
      never clear the global warning list
    - after this fix, a trigger that generates a warning or uses a
      table, clears the global warning list
    - however, when we leave a trigger or a function, the caller's
      warning information is restored (see more on this below).

  This change is not backward compatible as it is intended to make
  MySQL behavior similar to the SQL standard behavior:

  A stored function or trigger will get its own "warning area" (or,
  in standard terminology, diagnostics area).  At the beginning of
  the stored function or trigger, all messages from the caller area
  will be copied to the area of the trigger.  During execution, the
  message list will be cleared according to the MySQL rules
  described on the manual (SHOW WARNINGS entry).  At the end of the
  function/trigger, the "warning area" will be destroyed along with
  all warnings it contains, except that if the last statement of
  the function/trigger generated messages, these are copied into
  the "warning area" of the caller.

  Consequently, statements that use a table or generate a warning
  *will* clear warnings inside the trigger, but that will have no
  effect to the warning list of the calling (outer) statement.

mysql-test/r/sp.result:
  Fix test case results.
mysql-test/r/trigger.result:
  Fix test case results.
mysql-test/t/sp.test:
  Add test case for Bug#36649
mysql-test/t/trigger.test:
  Add test case for Bug#36649
sql/sp_head.cc:
  Emulate multiple warning areas -- one per stored program instance.
sql/sql_parse.cc:
  Message list reset rules are the same for statements inside
  or outside compound statements.