Problematic query:
insert ignore into `t1_federated` (`c1`) select `c1` from  `t1_local` a
where not exists (select 1 from `t1_federated` b where a.c1 = b.c1);
When this query is killed in another connection it could lead to crash.
The problem is follwing:
An attempt to obtain table statistics for subselect table in killed query
fails with an error. So JOIN::optimize() for subquery is failed but
it does not prevent further subquery evaluation.
At the first subquery execution JOIN::optimize() is called
(see subselect_single_select_engine::exec()) and fails with
an error. 'executed' flag is set to TRUE and it prevents
further subquery evaluation. At the second call
JOIN::optimize() does not happen as 'JOIN::optimized' is TRUE
and in case of uncacheable subquery the 'executed' flag is set
to FALSE before subquery evaluation. So we loose 'optimize stage'
error indication (see subselect_single_select_engine::exec()).
In other words 'executed' flag is used for two purposes, for
error indication at JOIN::optimize() stage and for an
indication of subquery execution. And it seems it's wrong
as the flag could be reset.


mysql-test/r/error_simulation.result:
  test case
mysql-test/t/error_simulation.test:
  test case
sql/item_subselect.cc:
  added new flag subselect_single_select_engine::optimize_error
  which is used for error detection which could happen at optimize
  stage.
sql/item_subselect.h:
  added new flag subselect_single_select_engine::optimize_error
sql/sql_select.cc:
  test case

Bug 12980094 - ASSERTION IN INNODB DETECTED IN RQG_PARTITION_DDL
Bug 13034534 - RQG TESTS FAIL ON WINDOWS WITH CRASH NEAR RW_LOCK_DEBUG_PRINT

All access to struct rw_lock_debug_struct must be protected by rw_lock_debug_mutex_enter().

Upmerge from 5.1 to 5.5

Change the RPM spec file so that each RPM "obsoletes" the corresponding RPMs
of all (other) configurations, so a "server" RPM of any configuration
can replace the "server" RPM of any other configuration on a "rpm -U".

Fix for commit_1innodb failure on pb2.

Background: as status increment differs for an unsafe statement 
when logged in stmt and row format,  mtr throws a content mismatch
error.

Fix:  call p_verify_status_increment with different arguments
for loging format as stmt and row/mixed and disable query log.  

                      COMPILE ON MACOSX LION

The problem was that on optimized builds, the wrong code was generated
for my_atomic_add64 if a variable argument was optimized away as a
constant.

This patch fixes the problem by making the variable volatile.

Another workaround is to specify architecture explicitly using e.g.
CFLAGS/CXXFLAGS= "-m64".

No test case added.

  run_query_stmt() might use disable_xxx vars after calling handle_no_error
  But handle_no_error() hes reverted any ONCE settings
  Fix is to take revert_properties() out of handle_no_error()

Bug 12704861.

Bug 12704861 fix was revno: 3504.1.1 (rb://693)
Bug 12612184 fix was revno: 3445.1.10 (rb://678)

Problem: commit_1innodb fails on pb2 after the patch for BUG#11758262
Background: Certain statements threw warnings only in statement mode causing
the result cintent mismatch.

Fix: disabled warnings from the statements.

Changes in client plugin needed for testing the issue (test instrumentation).

and fix some Swedish too.

Binary log of master can get a partially logged event if the server
runs out of disk space and, while waiting for some space to be freed,
is shut down (or crashes). If the server is not stopped, it will just
wait endlessly for space to be freed, thus no partial event anomaly
occurs.  The restarted master server has had a dubious policy to send
the incomplete event to slave which it apparently can't handle.
Although an error was printed out the fact of sending with unclear
error message is a source of confusion.
Actually the problem of presence an incomplete event in the binary log
was already fixed by WL 5493 (which was merged to our current trunk
branch, major version 5.6). The fix makes the server truncate the
binary log on server restart and recovery.

However 5.5 master can't do that. So the current issue is a problem of
sending incomplete events to the slave by 5.5 master.

It is fixed in this patch by changing the policy so that only complete
events are pushed by the dump thread to the IO thread. In addition,
the error text that master sends to the slave when an incomplete event
is found, now states that incomplete event may have been caused by an
out-of-disk space situation and provides coordinates of
the first and the last event bytes read.


mysql-test/std_data/bug11747416_32228_binlog.000001:
  a binlog is added with the last event written partly.
mysql-test/suite/rpl/r/rpl_cant_read_event_incident.result:
  new result file is added.
mysql-test/suite/rpl/r/rpl_log_pos.result:
  results updated.
mysql-test/suite/rpl/r/rpl_manual_change_index_file.result:
  results updated.
mysql-test/suite/rpl/r/rpl_packet.result:
  results updated.
mysql-test/suite/rpl/t/rpl_cant_read_event_incident.test:
  regression test for bug#11747416 : 32228 A disk full makes binary log corrupt
  is added.
sql/share/errmsg-utf8.txt:
  Increasing the explanatory part of ER_MASTER_FATAL_ERROR_READING_BINLOG error message twice
  in order to fit to the updated version which carries some more info.
sql/sql_repl.cc:
  Error text indicating a failure of reading from binlog that master delivers to the slave 
  is made more clear;
  A policy to regard a partial event to send it out to the slave anyway is removed.

Problem: The following statements can cause the slave to go out of sync 
if logged in statement format: 
INSERT IGNORE...SELECT 
INSERT ... SELECT ... ON DUPLICATE KEY UPDATE 
REPLACE ... SELECT 
UPDATE IGNORE :
CREATE ... IGNORE SELECT 
CREATE ... REPLACE SELECT  
           
Background: Since the order of the rows returned by the SELECT 
statement or otherwise may differ on master and slave, therefore
the above statements may cuase the salve to go out of sync with
the master. 
      
Fix:
Issue a warning when statements like the above are exectued and 
the bin-logging format is statement. If the logging format is mixed,
use row based logging. Marking a statement as unsafe has been 
done in the sql/sql_parse.cc instead of sql/sql_yacc.cc, because while
parsing for a token has been done we cannot be sure if the parsing
of the other tokens has been done as well.
      
Six new warning  messages has been added for each unsafe statement. 
      
binlog.binlog_unsafe.test has been updated to incoporate these additional unsafe statments.


******
BUG#11758262 - 50439: MARK INSERT...SEL...ON DUP KEY UPD,REPLACE...SEL,CREATE...[IGN|REPL] SEL 
Problem: The following statements can cause the slave to go out of sync 
if logged in statement format: 
INSERT IGNORE...SELECT 
INSERT ... SELECT ... ON DUPLICATE KEY UPDATE 
REPLACE ... SELECT 
UPDATE IGNORE :
CREATE ... IGNORE SELECT 
CREATE ... REPLACE SELECT  
           
Background: Since the order of the rows returned by the SELECT 
statement or otherwise may differ on master and slave, therefore
the above statements may cuase the salve to go out of sync with
the master. 
      
Fix:
Issue a warning when statements like the above are exectued and 
the bin-logging format is statement. If the logging format is mixed,
use row based logging. Marking a statement as unsafe has been 
done in the sql/sql_parse.cc instead of sql/sql_yacc.cc, because while
parsing for a token has been done we cannot be sure if the parsing
of the other tokens has been done as well.
      
Six new warning  messages has been added for each unsafe statement. 
      
binlog.binlog_unsafe.test has been updated to incoporate these additional unsafe statments.



mysql-test/extra/rpl_tests/rpl_insert_duplicate.test:
  Test removed: Added the test to rpl.rpl_insert_ignore.test
  
  
  
  ******
  Test removed: the test is redundant as the same is being tested in rpl.rpl_insert_ignore.
mysql-test/extra/rpl_tests/rpl_insert_id.test:
  Warnings disabled for the unsafe statements.
mysql-test/extra/rpl_tests/rpl_insert_ignore.test:
  1. Disabled warnings while  for unsafe statements
  2. As INSERT...IGNORE is an unsafe statement, an insert ignore not changing any rows, 
  will not be logged in the binary log, in the ROW and MIXED modes. It will however be logged
  in STATEMENT mode.
mysql-test/r/commit_1innodb.result:
  updated result file
  
  
  
  ******
  updated result file
mysql-test/suite/binlog/r/binlog_stm_blackhole.result:
  Updated result file.
mysql-test/suite/binlog/r/binlog_unsafe.result:
  updated result file
mysql-test/suite/binlog/t/binlog_unsafe.test:
   added tests for the statements marked as unsafe.
mysql-test/suite/rpl/r/rpl_insert_duplicate.result:
  File Removed :Result file of rpl_insert_duplicate, which has been removed.
mysql-test/suite/rpl/r/rpl_insert_ignore.result:
  Added the content of rpl.rpl_insert_duplicate here.
mysql-test/suite/rpl/r/rpl_insert_select.result:
  Result file removed as the corresponding test has beenn removed.
mysql-test/suite/rpl/r/rpl_known_bugs_detection.result:
  Updated result file.
mysql-test/suite/rpl/t/rpl_insert_duplicate.test:
  File Removed: this was a wrapper for rpl.rpl_insert_duplicate.test, which has been removed.
mysql-test/suite/rpl/t/rpl_insert_select.test:
  File Removed: This test became redundant after this fix, This test showed how INSERT IGNORE...SELECT break replication, which has been handled in this fix.
mysql-test/suite/rpl/t/rpl_known_bugs_detection.test:
  Since all the tests are statement based bugs are being tested, having mixed format
  forces the event to be written in row format. When the statement and causes the
  test to fail as certain known bugs do not occur when the even is logged in row format.
sql/share/errmsg-utf8.txt:
  added 6 new Warning messages.
  
  
  
  ******
  added 6 new Warning messages.
sql/sql_lex.cc:
  Added 6 new error Identifier [ER_BINLOG_STMT_UNSAFEE_*]
sql/sql_lex.h:
  Added 6 new BINLOG_STMT_UNSAFE_* enums to identify the type of unsafe statement dealt with in this bug.
  
  
  ******
  Added 6 new BINLOG_STMT_UNSAFE_* enums to identify the type of unsafe statement dealt with in this bug.
sql/sql_parse.cc:
  added check for specific queries and marked them as unsafe.
  
  
  ******
  added check for specific queries and marked them as unsafe.

SYSTEM VARIABLE NAME SQL_MAX_JOIN_SI 

BACKGROUND:

ER_TOO_BIG_SELECT refers to SQL_MAX_JOIN_SIZE, which is the
old name for MAX_JOIN_SIZE.

FIX:

Support for old name SQL_MAX_JOIN_SIZE is removed in MySQL 5.6
and is renamed as MAX_JOIN_SIZE.So the errmsg.txt 
and mysql.cc files have been updated and the corresponding result
files have also been updated.

                      CREATE_TIME IN INFORMATION_SC

It was impossible to determine MEMORY table creation time,
since it wasn't stored/exposed.

With this patch creation time is saved and it is available via
I_S.TABLES.CREATE_TIME.

Note: it was decided that additional analysis is required before
implementing UPDATE_TIME. Thus this patch doesn't store UPDATE_TIME.

Re-write the test, to make pushbuild green.
Workaraound for broken pow() function on:
SunOS tyr40 5.10 Generic_127112-05 i86pc i386 i86pc

(dbx) where
current thread: t@1
=>[1] Item_func_pow::val_real(this = 0x238af20) (optimized), at 0xaa8d13 (line ~1980) in "item_func.cc"

(dbx) print pow(1.01, 1.0)
pow(1.01, 1) = 1.01
(dbx) print pow(1.01, 10.0)
pow(1.01, 10) = 1.1046221254112
(dbx) print pow(1.01, 100.0)
pow(1.01, 100) = 2.7048138294215
(dbx) print pow(1.01, 1000.0)
pow(1.01, 1000) = 20959.155637814
(dbx) print pow(1.01, 10000.0)
pow(1.01, 10000) = 1.635828711189e+43
(dbx) print pow(1.01, 100000.0)
pow(1.01, 100000) = Infinity
(dbx) print pow(1.01, 1000000.0)
pow(1.01, 1000000) = Infinity
(dbx) print pow(1.01, 10000000.0)
pow(1.01, 10000000) = Infinity
(dbx) print pow(1.01, 100000000.0)
pow(1.01, 100000000) = Infinity
(dbx) print pow(1.01, 1000000000.0)
pow(1.01, 1000000000) = 0.0
(dbx) print pow(1.01, 10000000000.0)
pow(1.01, 10000000000) = 0.0

(dbx) print value
value = 1.0111111111111
(dbx) print val2
val2 = 8796093022207.0

(dbx) print pow(value, val2)
pow(value, val2) = 0.0

so it seems pow(1.01, y)
returns Infinity for large y, but then starts to return 0.0 for even larger values of y.

Automerged bundle from committed and approved cset.