incorrect when deadlock detection aborts". Print the correct
lock owner when recursive function lock_deadlock_recursive()
exceeds its maximum depth LOCK_MAX_DEPTH_IN_DEADLOCK_CHECK.

rb://217, approved by Marko.

value and  set *first_value to next autoinc if it's > col max value.
ie.  not rely on what is passed in from MySQL.

[49497] Error 1467 (ER_AUTOINC_READ_FAILED) on inserting a negative value
rb://236

value and  set *first_value to next autoinc if it's > col max value.
ie.  not rely on what is passed in from MySQL.

[49497] Error 1467 (ER_AUTOINC_READ_FAILED) on inserting a negative value
rb://236

if we were unable to initialize the tabe autoinc value. This is required for
the open to succeed. The only condition we currently treat as a hard error
is if the autoinc field instance passed in by MySQL is NULL.

Previously if the table autoinc value was 0 and the next value was requested
we had an assertion that would fail. Change that assertion and treat a value
of 0 to mean that the autoinc system is unavailable. Generation of next
value will now return failure.

rb://237

into a separate test/result files.

into a separate test/result files.

Change replace_result by using $MYSQLD_DATADIR. Tested in both embedded
mode and normal server mode.

the maximum auto-increment value from the table if
innodb_force_recovery is set to at least 4, so that writes are
disabled. (Bug #46193)

innobase_get_int_col_max_value(): Move the function definition before
ha_innobase::innobase_initialize_autoinc(), because that function now
calls this function.

ha_innobase::innobase_initialize_autoinc(): Change the return type to
void.  Do not attempt to read the maximum auto-increment value from
the table if innodb_force_recovery is set to at least 4.  Issue
ER_AUTOINC_READ_FAILED to the client when the auto-increment value
cannot be read.

rb://144 by Sunny, revised by Marko

Make innobase_get_int_col_max_value() a static function.
It does not access any fields of class ha_innobase.

while at 1023 transactions will cause assert. Handle possible
DB_TOO_MANY_CONCURRENT_TRXS when deleting metadata in
row_drop_table_for_mysql().

rb://220, approved by Marko

innobase_mysql_end_print_arbitrary_thd() that should have been
removed in r6347 when removing the function.

------------------------------------------------------------
revno: 3236
committer: Satya B <satya.bn@sun.com>
branch nick: mysql-5.1-bugteam
timestamp: Tue 2009-12-01 17:48:57 +0530
message:
  merge to mysql-5.1-bugteam
    ------------------------------------------------------------
    revno: 3234.1.1
    committer: Gleb Shchepa <gshchepa@mysql.com>
    branch nick: mysql-5.1-bugteam
    timestamp: Tue 2009-12-01 14:38:40 +0400
    message:
      Bug #38883 (reopened): thd_security_context is not thread safe, crashes?

      manual merge 5.0-->5.1, updating InnoDB plugin.
    ------------------------------------------------------------
    revno: 1810.3968.13
    committer: Gleb Shchepa <gshchepa@mysql.com>
    branch nick: mysql-5.0-bugteam
    timestamp: Tue 2009-12-01 14:24:44 +0400
    message:
      Bug #38883 (reopened): thd_security_context is not thread safe, crashes?

      The bug 38816 changed the lock that protects THD::query from
      LOCK_thread_count to LOCK_thd_data, but didn't update the associated
      InnoDB functions.

      1. The innobase_mysql_prepare_print_arbitrary_thd and the
      innobase_mysql_end_print_arbitrary_thd InnoDB functions have been
      removed, since now we have a per-thread mutex: now we don't need to wrap
      several inter-thread access tries to THD::query with a single global
      LOCK_thread_count lock, so we can simplify the code.

      2. The innobase_mysql_print_thd function has been modified to lock
      LOCK_thd_data in direct way.

printed after a long lock wait in InnoDB. Separate out the 
lock wait timeout check thread from monitor information
printing thread.

rb://200 Approved by Marko.

This the fix for the first part of Bug #41609 from InnoDB Plugin to
the built-in InnoDB in MySQL 5.1. This allows InnoDB Hot Backup to
back up a database while the built-in InnoDB in MySQL 5.1 is creating
temporary tables. (This fix does not address the printouts about
missing .ibd files for temporary tables at InnoDB startup, which was
committed to branches/zip in r6252.)

rb://219 approved by Sunny Bains.

branches/zip: Distinguish temporary tables in MLOG_FILE_CREATE.
This addresses Mantis Issue #23 in InnoDB Hot Backup and some
of MySQL Bug #41609.

In MLOG_FILE_CREATE, we need to distinguish temporary tables, so that
InnoDB Hot Backup can work correctly.  It turns out that we can do this
easily, by using a bit of the previously unused parameter for page number.
(The page number parameter of MLOG_FILE_CREATE has been written as 0 
ever since MySQL 4.1, which introduced MLOG_FILE_CREATE.)

MLOG_FILE_FLAG_TEMP: A flag for indicating a temporary table in
the page number parameter of MLOG_FILE_ operations.

fil_op_write_log(): Add the parameter log_flags.

fil_op_log_parse_or_replay(): Add the parameter log_flags.
Do not replay MLOG_FILE_CREATE when MLOG_FILE_FLAG_TEMP is set in log_flags.
This only affects ibbackup --apply-log.  InnoDB itself never replays file
operations.

because of different case mode

There is no change to the InnoDB code, only to fix test case by
changing "T1" to "t1".

Minor changes to support plugin snapshots.

This bug is similiar to the negative autoinc filter patch from earlier,
with the additional handling of filtering out the negative column values
set explicitly by the user.

rb://184
Approved by Heikki.

branches/5.1: Fix BUG#49032 - auto_increment field does not initialize to last value in InnoDB Storage Engine.

We use the appropriate function to read the column value for non-integer
autoinc column types, namely float and double.

rb://208. Approved by Marko.

(this should be skipped when merging 5.1 into zip)

and return DB_ERROR instead. This is to avoid a possible SIGSEGV
by mysql error handling re-entering the storage layer for dup key
info without proper table handle.
This is to prevent a server crash when error situation in bug
#45961 "DDL on partitioned innodb tables leaves data dictionary
in an inconsistent state" happens.

rb://157 approved by Sunny Bains.

the fix of bug #48469, because fseg_free() is not defined
in the zip branch. And we could save one mini-trasaction started
by fseg_free().

Approved by Marko.

White space fixup - indent under the opening (

double is incorrectly reported in InnoDB table monitor".
Certain datatypes are not printed correctly in
dtype_print().

rb://204 Approved by Marko.

configured too small, crash and corruption!". Function
btr_create() did not check the return status of fseg_create(),
and continue the index creation even there is no sufficient
space.

rb://205 Approved by Marko

Merge a change from MySQL:
(this has been reviewed by Calvin and Marko, and Calvin says Luis has
incorporated Marko's suggestions)

  ------------------------------------------------------------
  revno: 3092.5.1
  committer: Luis Soares <luis.soares@sun.com>
  branch nick: mysql-5.1-bugteam
  timestamp: Thu 2009-09-24 15:52:52 +0100
  message:
    BUG#42829: binlogging enabled for all schemas regardless of
    binlog-db-db / binlog-ignore-db
          
    InnoDB will return an error if statement based replication is used
    along with transaction isolation level READ-COMMITTED (or weaker),
    even if the statement in question is filtered out according to the
    binlog-do-db rules set. In this case, an error should not be printed.
          
    This patch addresses this issue by extending the existing check in
    external_lock to take into account the filter rules before deciding to
    print an error. Furthermore, it also changes decide_logging_format to
    take into consideration whether the statement is filtered out from 
    binlog before decision is made.
  added:
    mysql-test/suite/binlog/r/binlog_stm_do_db.result
    mysql-test/suite/binlog/t/binlog_stm_do_db-master.opt
    mysql-test/suite/binlog/t/binlog_stm_do_db.test
  modified:
    sql/sql_base.cc
    sql/sql_class.cc
    storage/innobase/handler/ha_innodb.cc
    storage/innobase/handler/ha_innodb.h
    storage/innodb_plugin/handler/ha_innodb.cc
    storage/innodb_plugin/handler/ha_innodb.h

after several selects on a large DB

During stress environment, Windows AIO may fail with error code
ERROR_OPERATION_ABORTED. InnoDB does not handle the error, rather
crashes. The cause of the error is unknown, but likely due to
faulty hardware or driver.

This patch introduces a new error code OS_FILE_OPERATION_ABORTED,
which maps to Windows ERROR_OPERATION_ABORTED (995). When the error
is detected during AIO, the InnoDB will issue a synchronous retry
(read/write).

This patch has been extensively tested by MySQL support.

Approved by: Marko
rb://196

White space fixup.

Merge a part of r2911.5.5 from MySQL:
(the other part of this was merged in c5700)

  ------------------------------------------------------------
  revno: 2911.5.5
  committer: Vladislav Vaintroub <vvaintroub@mysql.com>
  branch nick: 5.1-innodb_plugin
  timestamp: Wed 2009-06-10 10:59:49 +0200
  message:
    Backport WL#3653 to 5.1 to enable bundled innodb plugin.
    Remove custom DLL loader code from innodb plugin code, use 
    symbols exported from mysqld.
  removed:
    storage/innodb_plugin/handler/handler0vars.h
    storage/innodb_plugin/handler/win_delay_loader.cc
  added:
    storage/mysql_storage_engine.cmake
    win/create_def_file.js
  modified:
    CMakeLists.txt
    include/m_ctype.h
    include/my_global.h
    include/my_sys.h
    include/mysql/plugin.h
    libmysqld/CMakeLists.txt
    mysql-test/mysql-test-run.pl
    mysql-test/t/plugin.test
    mysql-test/t/plugin_load-master.opt
    mysys/charset.c
    sql/CMakeLists.txt
    sql/handler.h
    sql/mysql_priv.h
    sql/mysqld.cc
    sql/sql_class.cc
    sql/sql_class.h
    sql/sql_list.h
    sql/sql_profile.h
    storage/Makefile.am
    storage/archive/CMakeLists.txt
    storage/blackhole/CMakeLists.txt
    storage/csv/CMakeLists.txt
    storage/example/CMakeLists.txt
    storage/federated/CMakeLists.txt
    storage/heap/CMakeLists.txt
    storage/innobase/CMakeLists.txt
    storage/innobase/handler/ha_innodb.cc
    storage/innodb_plugin/CMakeLists.txt
    storage/innodb_plugin/handler/ha_innodb.cc
    storage/innodb_plugin/handler/handler0alter.cc
    storage/innodb_plugin/handler/i_s.cc
    storage/innodb_plugin/plug.in
    storage/myisam/CMakeLists.txt
    storage/myisammrg/CMakeLists.txt
    win/Makefile.am
    win/configure.js

Followup to r5700: Adjust the changes so they are the same as in the BZR
repository.

  ------------------------------------------------------------------------
  r6134 | marko | 2009-11-04 07:57:29 +0000 (Wed, 04 Nov 2009) | 5 lines

  branches/zip: innobase_convert_identifier(): Convert table names with
  explain_filename() to address Bug #32430: 'show innodb status'
  causes errors Invalid (old?) table or database name in logs.

  rb://134 approved by Sunny Bains
  ------------------------------------------------------------------------

innobase_print_identifier(): Replace with innobase_convert_name().

innobase_convert_identifier(): New function, called by innobase_convert_name().

Revert a change to Makefile.am that sneaked unnoticed in c6127.

Backport c6121 from branches/zip:

  ------------------------------------------------------------------------
  r6121 | sunny | 2009-10-30 01:42:11 +0200 (Fri, 30 Oct 2009) | 7 lines
  Changed paths:
     M /branches/zip/mysql-test/innodb-autoinc.result
  
  branches/zip: This test has been problematic for sometime now. The underlying
  bug is that the data dictionaries get out of sync. In the AUTOINC code we
  try and apply salve to the symptoms. In the past MySQL made some unrelated
  change and the dictionaries stopped getting out of sync and this test started
  to fail. Now, it seems they have reverted that changed and the test is
  passing again. I suspect this is not he last time that this test will change.
  
  ------------------------------------------------------------------------

White-space fixup.