Bug#46354, when defining partitions without subpartition definition after defining it with the first partition and using list partition caused crash, fixed by more error checks in parser

those keywords do nothing in 5.1 (they are meant for future versions, for example featuring the Maria engine)
so they are here removed from the syntax. Adding those keywords to future versions when needed is:
- WL#5034 "Add TRANSACTIONA=0|1 and PAGE_CHECKSUM=0|1 clauses to CREATE TABLE"
- WL#5037 "New ROW_FORMAT value for CREATE TABLE: PAGE"

mysql-test/r/create.result:
  test that syntax is not accepted
mysql-test/t/create.test:
  test that syntax is not accepted
sql/handler.cc:
  remove ROW_FORMAT=PAGE
sql/handler.h:
  Mark unused objects, but I don't remove them by fear of breaking any plugin which includes this file
  (see also table.h)
sql/lex.h:
  removing syntax
sql/sql_show.cc:
  removing output of noise keywords in SHOW CREATE TABLE and INFORMATION_SCHEMA.TABLES
sql/sql_table.cc:
  removing TRANSACTIONAL
sql/sql_yacc.yy:
  removing syntax
sql/table.cc:
  removing TRANSACTIONAL, PAGE_CHECKSUM. Their place in the frm file is not reclaimed,
  for compatibility with older 5.1.
sql/table.h:
  Mark unused objects, but I don't remove them by fear of breaking any plugin which includes this file
  (and there are several engines which use the content TABLE_SHARE and thus rely on a certain binary
  layout of this structure).

consumption (CPU) for upgrading a large log table can be intense.
Therefore, truncate the general_log table beforehand if running
mysql_upgrade test with Valgrind.

mysql-test/t/mysql_upgrade.test:
  Truncate log table if running with Valgrind.

            compression 
 
Since uint3korr() may read 4 bytes depending on build flags and 
platform, allocate 1 extra "safety" byte in the network buffer 
for cases when uint3korr() in my_real_read() is called to read
last 3 bytes in the buffer. 
 
It is practically hard to construct a reliable and reasonably 
small test case for this bug as that would require constructing 
input stream such that a certain sequence of bytes in a 
compressed packet happens to be the last 3 bytes of the network 
buffer. 


sql/net_serv.cc:
  Allocate 1 extra "safety" byte in the network buffer for cases 
  when uint3korr() is used to read last 3 bytes in the buffer.

If the log_bin_trust_function_creators option is not defined, creating a stored
function requires either one of the modifiers DETERMINISTIC, NO SQL, or READS
SQL DATA. Executing a stored function should also follows the same rules if in
STATEMENT mode. However, this was not happening and a wrong error was being
printed out: ER_BINLOG_ROW_RBR_TO_SBR.

The patch makes the creation and execution compatible and prints out the correct
error ER_BINLOG_UNSAFE_ROUTINE when a stored function without one of the modifiers
above is executed in STATEMENT mode.

during bootstrap on a embedded server.

libmysqld/lib_sql.cc:
  Handle a failure during bootstrap.

Post-merge fix: test case could fail due to a conversion of the
max_join_size value to a integer. Fixed by preserving the value
as a string for comparison purposes.

tests/mysql_client_test.c:
  Preserve max_join_size value as a string instead of converting
  it to a integer -- value can be larger then the type used.

One of the tests introduced for this bug was failing 
because of path size restriction in windows.
Moved the test case to a new test which is disabled under windows.

mysql-test/r/partition_not_embedded.result:
  updated test results after removing a test case.
mysql-test/r/partition_rename_longfilename.result:
  Test result for partition_rename_longfilename
mysql-test/t/partition_not_embedded.test:
  Removed the test case which tests renaming partition table such that
  the file name is 255 char long.
mysql-test/t/partition_rename_longfilename.test:
  Test case to test renaming partition table such that
  the file name is 255 char long.
  Moved from partition_no_embedded.

           to wrong result
      
When using MIXED mode and issuing 'CREATE TEMPORARY TABLE t_tmp',
the statement is logged if the current binlogging mode is
STATEMENT. This causes the slave to replay the instruction and
create the temporary table as well. If there is no switch to ROW
mode, and later on a 'DROP TEMPORARY TABLE t_tmp' is issued, then
this statement will also be logged and the slave will
remove/close the temporary table.
      
However, if there is a switch to ROW mode between the CREATE and
DROP TEMPORARY table, the DROP statement will not be logged,
leaving the slave with a dangling temporary table.
      
This patch addresses this, by always logging a DROP TEMPORARY
TABLE IF EXISTS when in mixed mode and a drop statement is issued
for temporary table(s).

mysql-test/suite/rpl/r/rpl_temp_table_mix_row.result:
  Updated result file.
mysql-test/suite/rpl/t/rpl_temp_table_mix_row.test:
  Added test case.
sql/sql_table.cc:
  When dropping table(s) in mixed mode and current statement 
  logging is ROW, builds an extra DROP TEMPORARY TABLE IF 
  EXISTS for temporary tables that are being dropped. Later, 
  it logs the extra drop statement.

mysqld

The problem was that enabling the event scheduler inside a init
file caused the server to crash upon start-up. The crash occurred
because the event scheduler wasn't being initialized before the
commands in the init-file are processed.

The solution is to initialize the event scheduler before the init
file is read. The patch also disables the event scheduler during
bootstrap and makes the bootstrap operation robust in the
presence of background threads.

mysql-test/std_data/init_file.dat:
  Add test case for Bug#43587
sql/event_scheduler.cc:
  Signal that the thread_count has been decremented.
sql/events.cc:
  Disable the event scheduler during bootstrap.
sql/mysql_priv.h:
  Export variable.
sql/mysqld.cc:
  Initialize the event scheduler before commands are executed.
sql/sql_parse.cc:
  Signal that the bootstrap thread is done.

mysqld

******
manual merge 5.0-bugteam --> 5.1-bugteam (bug 38816)

            procedures causes crashes!

The problem of that bugreport was mostly fixed by the
patch for bug 38691.
However, attached test case focused on another crash or
valgrind warning problem: SHOW PROCESSLIST query accesses
freed memory of SP instruction that run in a parallel
connection.

Changes of thd->query/thd->query_length in dangerous
places have been guarded with the per-thread
LOCK_thd_data mutex (the THD::LOCK_delete mutex has been
renamed to THD::LOCK_thd_data).


sql/ha_myisam.cc:
  Bug #38816: kill + flush tables with read lock + stored
              procedures causes crashes!
  
  Modification of THD::query/query_length has been guarded
  with the a THD::set_query() method call/LOCK_thd_data
  mutex.
  Unnecessary locking with the global LOCK_thread_count
  mutex has been removed.
sql/log_event.cc:
  Bug #38816: kill + flush tables with read lock + stored
              procedures causes crashes!
  
  Modification of THD::query/query_length has been guarded
  with the THD::set_query()) method call/LOCK_thd_data
  mutex.
sql/slave.cc:
  Bug #38816: kill + flush tables with read lock + stored
              procedures causes crashes!
  
  Modification of THD::query/query_length has been guarded
  with the THD::set_query() method call/LOCK_thd_data mutex.
  
  The THD::LOCK_delete mutex has been renamed to
  THD::LOCK_thd_data.
sql/sp_head.cc:
  Bug #38816: kill + flush tables with read lock + stored
              procedures causes crashes!
  
  Modification of THD::query/query_length has been guarded
  with the a THD::set_query() method call/LOCK_thd_data
  mutex.
sql/sql_class.cc:
  Bug #38816: kill + flush tables with read lock + stored
              procedures causes crashes!
  
  The new THD::LOCK_thd_data mutex and THD::set_query()
  method has been added to guard modifications of THD::query/
  THD::query_length fields, also the Statement::set_statement()
  method has been overloaded in the THD class.
  
  The THD::LOCK_delete mutex has been renamed to
  THD::LOCK_thd_data.
sql/sql_class.h:
  Bug #38816: kill + flush tables with read lock + stored
              procedures causes crashes!
  
  The new THD::LOCK_thd_data mutex and THD::set_query()
  method has been added to guard modifications of THD::query/
  THD::query_length fields, also the Statement::set_statement()
  method has been overloaded in the THD class.
  
  The THD::LOCK_delete mutex has been renamed to
  THD::LOCK_thd_data.
sql/sql_insert.cc:
  Bug #38816: kill + flush tables with read lock + stored
              procedures causes crashes!
  
  Modification of THD::query/query_length has been guarded
  with the a THD::set_query() method call/LOCK_thd_data
  mutex.
sql/sql_parse.cc:
  Bug #38816: kill + flush tables with read lock + stored
              procedures causes crashes!
  
  Modification of THD::query/query_length has been guarded
  with the a THD::set_query() method call/LOCK_thd_data mutex.
sql/sql_repl.cc:
  Bug #38816: kill + flush tables with read lock + stored
              procedures causes crashes!
  
  The THD::LOCK_delete mutex has been renamed to
  THD::LOCK_thd_data.
sql/sql_show.cc:
  Bug #38816: kill + flush tables with read lock + stored
              procedures causes crashes!
  
  Inter-thread read of THD::query/query_length field has
  been protected with a new per-thread LOCK_thd_data
  mutex in the mysqld_list_processes function.

In create_myisam_from_heap() mark all errors as fatal except 
HA_ERR_RECORD_FILE_FULL for a HEAP table.

Not doing so could lead to problems, e.g. in a case when a
temporary MyISAM table gets overrun due to its MAX_ROWS limit
while executing INSERT/REPLACE IGNORE ... SELECT. 
The SELECT execution was aborted, but the error was 
converted to a warning due to IGNORE clause, so neither 'ok' 
nor 'error' packet could be sent back to the client. This 
condition led to hanging client when using 5.0 server, or 
assertion failure in 5.1.


mysql-test/r/insert_select.result:
  Added a test case for bug #46075.
mysql-test/t/insert_select.test:
  Added a test case for bug #46075.
sql/sql_select.cc:
  In create_myisam_from_heap() mark all errors as fatal except 
  HA_ERR_RECORD_FILE_FULL for a HEAP table.

Problem was that a failing rename just left the partitions at the state
it was at the failure.

Solution was to try to revert the started rename if a failure occured.

mysql-test/r/partition_not_embedded.result:
  Bug#30102: Rename table does corrupt tables with partition files on failure
  
  New result file
mysql-test/t/partition_not_embedded.test:
  Bug#30102: Rename table does corrupt tables with partition files on failure
  
  New test file
  (list_files does not report the files in embedded)
sql/ha_partition.cc:
  Bug#30102: Rename table does corrupt tables with partition files on failure
  
  Better error handling for rename partitions (reverting the started rename
  operation)
  
  Different order of files for delete.
sql/handler.cc:
  Bug#30102: Rename table does corrupt tables with partition files on failure
  
  Tries to remove as many table files as possible
  if the first delete succeeds.

"WL#4584 New euckr characters" from 5.4.
(as agreed on ServerPT meeting on July 8).

not logged
        
Errors encountered during initialization of the SSL subsystem
are printed to stderr, rather than to the error log.
        
This patch adds a parameter to several SSL init functions to
report the error (if any) out to the caller. The function
init_ssl() in mysqld.cc is moved after the initialization of
the log subsystem, so that any error messages can be logged to
the error log. Printing of messages to stderr has been 
retained to get diagnostic output in a client context.


include/violite.h:
  Adding an enumeration for the various errors that can
  occur during initialization of the SSL module.
sql/mysqld.cc:
  Adding more logging of SSL init errors, and moving
  init_ssl() till after initialization of logging 
  subsystem.
vio/viosslfactories.c:
  Define error strings, provide an access method for these
  strings, and maintain an error parameter in several funcs
  to return the error (if any) to the caller.