Some ut_a(!rec_offs_any_null_extern()) assertion failures are indicating
genuine BLOB bugs, others are bogus failures when rolling back incomplete
transactions at crash recovery. This needs more work, and until I get a
chance to work on it, other testing must not be disrupted by this.

revno 2995.37.209
revision id marko.makela@oracle.com-20110518120508-qhn7vz814vn77v5k
parent marko.makela@oracle.com-20110517121555-lmple24qzxqkzep4
timestamp: Wed 2011-05-18 15:05:08 +0300
message:
  Fix a bogus UNIV_SYNC_DEBUG failure in the fix of Bug #59641
  or Oracle Bug #11766513.

  trx_undo_free_prepared(): Do not acquire or release trx->rseg->mutex.
  This code is invoked in the single-threaded part of shutdown, therefore
  a mutex is not needed.

SYNTAX TRIGGERS IN ANY WAY

Table with triggers which were using deprecated (5.0-only) syntax became
unavailable for any DML and DDL after upgrade to 5.1 version of server.
Attempt to execute any statement on such a table resulted in parsing
error reported. Since this included DROP TRIGGER and DROP TABLE
statements (actually, the latter was allowed but was not functioning
properly for such tables) it was impossible to fix the problem without
manual operations on .TRG and .TRN files in data directory.

The problem was that failure to parse trigger body (due to 5.0-only
syntax) when opening trigger file for a table prevented the table
from being open. This made all operations on the table impossible
(except DROP TABLE which due to peculiarity in its implementation
dropped the table but left trigger files around).

This patch solves this problem by silencing error which occurs when
we parse trigger body during table open. Error message is preserved
for the future use and table is marked as having a broken trigger.
We also try to analyze parse tree to recover trigger name, which
will be needed in order to drop the broken trigger. DML statements
which invoke triggers on the table marked as having broken trigger
are prohibited and emit saved error message. The same happens for
DDL which change triggers except DROP TRIGGER and DROP TABLE which
try their best to do what was requested. Table becomes no longer
marked as having broken trigger when last such trigger is dropped.

mysql-test/r/trigger-compat.result:
  Add results for test case for bug#45235
mysql-test/t/trigger-compat.test:
  Add test case for bug#45235.
sql/sp_head.cc:
  Added protection against MEM_ROOT double restoring to
  sp_head::restore_thd_mem_root() method. Since this
  method can be sometimes called twice during parsing
  of stored routine (the first time during normal flow
  of parsing, and the second time when a syntax error
  is detected) we need to shortcut execution of the
  method to avoid damaging MEM_ROOT by the second
  consecutive call to this method.
sql/sql_trigger.cc:
  Added error handler Deprecated_trigger_syntax_handler to 
  catch non-OOM errors during parsing of trigger body.
  
  Added handling of parse errors into method 
  Table_triggers_list::check_n_load().
sql/sql_trigger.h:
  Added new members to handle broken triggers and error messages.

row_build(): The record may contain null BLOB pointers when the server
is rolling back an insert that was interrupted by a server crash.

THE EVENT STATUS.

Any ALTER EVENT statement on a disabled event enabled it back
(unless this ALTER EVENT statement explicitly disabled the event).

The problem was that during processing of an ALTER EVENT statement
value of status field was overwritten unconditionally even if new
value was not specified explicitly. As a consequence this field
was set to default value for status which corresponds to ENABLE.

The solution is to check if status field was explicitly specified in
ALTER EVENT statement before assigning new value to status field.

mysql-test/r/events_bugs.result:
  test's result for Bug#11764334 was added.
mysql-test/t/events_bugs.test:
  new test for Bug#11764334 was added.
sql/event_db_repository.cc:
  mysql_event_fill_row() was modified: set value for status field
  in events tables only in case if statement CREATE EVENT
  is being processed or if this value was set in ALTER EVENT
  statement.
  Event_db_repository::create_event was modified: removed redundant
  setting of status field after return from call to mysql_event_fill_row().
sql/event_parse_data.h:
  Event_parse_data structure was modified: added flag
  status_changed that is set to true if status's value
  was changed in ALTER EVENT statement.
sql/sql_yacc.yy:
  Set flag status_changed if status was set in ALTER EVENT
  statement.

SEEMS TO BE 'LEAKING' INTO THE SCHEMA NAME SPACE)
and bug#12428824 (Parser stack overflow and crash in sp_add_used_routine
with obscure query).

The first problem was that attempts to call a stored function by
its fully qualified name ended up with unwarranted error "ERROR 1305
(42000): FUNCTION someMixedCaseDb.my_function_name does not exist"
if this function belonged to a schema that had uppercase letters in
its name AND --lower_case_table_names was equal to either 1 or 2.

The second problem was that 5.5 version of MySQL server might have
crashed when a user tried to call stored function with too long name
or too long database name (i.e if a function and database name combined
occupied more than 2*3*64 bytes in utf8). This issue didn't affect
versions of server < 5.5.
 
The first problem was caused by the fact that in cases when a stored
function was called by its fully qualified name we didn't lowercase
name of its schema before performing look up of the function in
mysql.proc table even although lower_case_table_names mode was on.
As result we were unable to find this function since during its
creation we store lowercased version of schema name in the system
table in this mode and field for schema name uses binary collation.

Calls to stored functions were unaffected by this problem since for
them schema name is converted to lowercase as necessary.

The reason for the second bug was that MySQL Server didn't check length
of function name and database name before proceeding with execution of
stored function. As a consequence too long database name or function
name caused buffer overruns in places where the code assumes that their
length is within fixed limits, like mdl_key_init() in 5.5.

Again this issue didn't affect calls to stored procedures as for them
length of schema name and procedure name are properly checked.

This patch fixes both these bugs by adding calls to check_db_name()
and check_routine_name() to grammar rule which corresponds to a call
to a stored function. These functions ensure that length of database
name and function name for routine called is within standard limit.
Moreover call to check_db_name() handles conversion of database name
to lowercase if --lower_case_table_names mode is on.

Note that even although the second issue seems to be only reproducible
in 5.5 we still add code fixing it to 5.1 to be on the safe side (and
make code a bit more robust against possible future changes).

mysql-test/r/sp-error.result:
  Added testcase results for bug#12428824.
mysql-test/r/sp.result:
  Added testcase result for bug#11840395.
mysql-test/t/sp-error.test:
  Added testcase for bug#12428824.
mysql-test/t/sp.test:
  Added testcase for bug#11840395.
sql/sql_yacc.yy:
  Modified 'function_call_generic' rule to call check_db_name() and
  check_routine_name() in order to ensure that lengths of database name
  and function name are within limits. check_db_name() is also responsible
  for normalizing function's database name for lookup in cases when
  lowercase_table_names mode is on.

If UNIV_DEBUG or UNIV_BLOB_LIGHT_DEBUG is enabled, add
!rec_offs_any_null_extern() assertions, ensuring that records do not
contain null pointers to externally stored columns in inappropriate
places.

btr_cur_optimistic_update(): Assert !rec_offs_any_null_extern().
Incomplete records must never be updated or deleted. This assertion
will cover also the pessimistic route.

row_build(): Assert !rec_offs_any_null_extern(). Search tuples must
never be built from incomplete index entries.

row_rec_to_index_entry(): Assert !rec_offs_any_null_extern() unless
ROW_COPY_DATA is requested. ROW_COPY_DATA is used for
multi-versioning, and therefore it might be valid to copy the most
recent (uncommitted) version while it contains a null pointer to
off-page columns.

row_vers_build_for_consistent_read(),
row_vers_build_for_semi_consistent_read(): Assert !rec_offs_any_null_extern()
on all versions except the most recent one.

trx_undo_prev_version_build(): Assert !rec_offs_any_null_extern() on
the previous version.

rb:682 approved by Sunny Bains

Problem: in case of wrong data insert into indexed GEOMETRY fields 
(e.g. NULL value for a not NULL field) MyISAM reported 
"ERROR 126 (HY000): Incorrect key file for table; try to repair it"
due to misuse of the key deletion function.

Fix: always use R-tree key functions for R-tree based indexes
and B-tree key functions for B-tree based indexes.


mysql-test/r/gis-rtree.result:
  Bug#11764487: myisam corruption with insert ignore and invalid spatial data
    - test result.
mysql-test/t/gis-rtree.test:
  Bug#11764487: myisam corruption with insert ignore and invalid spatial data
    - test case.
storage/myisam/mi_update.c:
  Bug#11764487: myisam corruption with insert ignore and invalid spatial data
    - handling update errors check for HA_ERR_NULL_IN_SPATIAL as well to be 
  consistent with mi_write();
    - always use keyinfo->ck_delete()/ck_insert() instead of _mi_ck_delete()/_mi_ck_write()
  to handle index properly, as it may be of B-tree or R-tree type.
storage/myisam/mi_write.c:
  Bug#11764487: myisam corruption with insert ignore and invalid spatial data
    - always use keyinfo->ck_delete() instead of _mi_ck_delete() to handle
  index properly, as it may be of B-tree or R-tree type.

  FAIL IN EMBEDDED SERVER

FreeBSD 64 bit needs the FP_X_DNML to fpsetmask() to prevent exceptions from
propagating into mysql (as a threaded application).
However fpsetmask() itself is deprecated in favor of fedisableexcept().
1. Fixed the #ifdef to check for FP_X_DNML instead of i386.
2. Added a configure.in check for fedisableexcept() and, if present,
   this function is called insted of the fpsetmask().
No need for new tests, as the existing tests cover this already.
Removed the affected tests from the experimental list.

The problem is that clients implementing the 4.0 version of the
protocol (that is, mysql-4.0) do not null terminate a string
at the end of the authentication packet. These clients denote
the end of the string with the end of the packet.

Although this goes against the documented (see MySQL Internals
ClientServer Protocol wiki) description of the protocol, these
old clients still need to be supported.

The solution is to support the documented and actual behavior
of the clients. If a client is using the pre-4.1 version of
the protocol, the end of a string in the authentication packet
can either be denoted with a null character or by the end of
the packet. This restores backwards compatibility with old
clients implementing either the documented or actual behavior.

sql/password.c:
  The scrambled message, as provided by the user, might not be
  properly null terminated. If this is the case, uninitialized
  memory past the end of the buffer could theoretically be
  accessed. To ensure that this is never the case, copy the
  scrambled message over to a null terminated auxiliar buffer.
sql/sql_connect.cc:
  Use different execution paths to read strings depending on the
  protocol being used. If version 4.0 of the protocol is used,
  end of string can be denoted with a NUL character or by the
  end of the packet.
  
  If there are not enough bytes left after the current position
  of the buffer to satisfy the current string, the string is
  considered to be empty. This is required because old clients
  do not send the password string field if the password is empty.

The problem is that although AIX implements bzero, its prototype
is not declared by default. Since AC_CHECK_FUNC(bzero) succeeds
even though a prototype is not declared, this breaks compilation
in C++ files where a prototype is required.

The solution is to only use bzero if a prototype is also declared.

configure.in:
  Check if bzero is declared. No need to specify the includes,
  unisted.h and strings.h are already part of AC_INCLUDES_DEFAULT.

will create multiple running events.

A CREATE IF NOT EXIST on an event that existed and was enabled caused
multiple instances of the event to run. Disabling the event didn't  help.
If the event was  dropped, the event stopped running, but when created
again, multiple instances of the event were still running. The only way
to get out of this situation was  to restart the server.

The problem was that Event_db_repository::create_event() didn't return
enough information to discriminate between situation when event didn't
exist and was created and when event did exist and was not created
(but a warning was emitted). As result in the latter case event
was added to in-memory queue of events second time. And this led to
unwarranted multiple executions of the same event.

The solution is to add out-parameter to Event_db_repository::create_event()
method which will signal that event was not created because it already
exists and so it should not be added to the in-memory queue.


mysql-test/r/events_bugs.result:
  Added results for test for Bug#12546938.
mysql-test/t/events_bugs.test:
  Added test for Bug#12546938.
sql/event_db_repository.cc:
  Event_db_repository::create_event was modified: set newly added out-parameter
  event_already_exists to true value if event wasn't created because event
  already existed and IF NOT EXIST clause was present.
sql/event_db_repository.h:
  Added out-parameter 'event_already_exists' to create_event() method.
sql/events.cc:
  Events::create_event was modified: insert new element into
  event queue only if event was actually created.

HA_INNOBASE::UPDATE_ROW, TEMPORARY TABLE, TABLE LOCK".

Attempt to update an InnoDB temporary table under LOCK TABLES
led to assertion failure in both debug and production builds
if this temporary table was explicitly locked for READ. The 
same scenario works fine for MyISAM temporary tables.

The assertion failure was caused by discrepancy between lock 
that was requested on the rows of temporary table at LOCK TABLES
time and by update operation. Since SQL-layer requested a 
read-lock at LOCK TABLES time InnoDB engine assumed that upcoming
statements which are going to be executed under LOCK TABLES will 
only read table and therefore should acquire only S-lock.
An update operation broken this assumption by requesting X-lock.

Possible approaches to fixing this problem are:

1) Skip locking of temporary tables as locking doesn't make any
   sense for connection-local objects.
2) Prohibit changing of temporary table locked by LOCK TABLES ... 
   READ.

Unfortunately both of these approaches have drawbacks which make 
them unviable for stable versions of server.

So this patch takes another approach and changes code in such way
that LOCK TABLES for a temporary table will always request write
lock. In 5.1 version of this patch switch from read lock to write
lock is done inside of InnoDBs handler methods as doing it on 
SQL-layer causes compatibility troubles with FLUSH TABLES WITH
READ LOCK.

mysql-test/suite/innodb/r/innodb_mysql.result:
  Added test for bug #11762012 - "54553: INNODB ASSERTS IN 
  HA_INNOBASE::UPDATE_ROW, TEMPORARY TABLE, TABLE LOCK".
mysql-test/suite/innodb/t/innodb_mysql.test:
  Added test for bug #11762012 - "54553: INNODB ASSERTS IN 
  HA_INNOBASE::UPDATE_ROW, TEMPORARY TABLE, TABLE LOCK".
mysql-test/suite/innodb_plugin/r/innodb_mysql.result:
  Added test for bug #11762012 - "54553: INNODB ASSERTS IN 
  HA_INNOBASE::UPDATE_ROW, TEMPORARY TABLE, TABLE LOCK".
mysql-test/suite/innodb_plugin/t/innodb_mysql.test:
  Added test for bug #11762012 - "54553: INNODB ASSERTS IN 
  HA_INNOBASE::UPDATE_ROW, TEMPORARY TABLE, TABLE LOCK".
storage/innobase/handler/ha_innodb.cc:
  Assume that a temporary table locked by LOCK TABLES can be updated
  even if it was only locked for read and therefore an X-lock should 
  be always requested for such tables.
storage/innodb_plugin/handler/ha_innodb.cc:
  Assume that a temporary table locked by LOCK TABLES can be updated
  even if it was only locked for read and therefore an X-lock should 
  be always requested for such tables.

Problem: MYSQL_BIN_LOG::reset_logs acquires mutexes in wrong order.
The correct order is first LOCK_thread_count and then LOCK_log. This function
does it the other way around. This leads to deadlock when run in parallel
with a thread that takes the two locks in correct order. For example, a thread
that disconnects will take the locks in the correct order.
Fix: change order of the locks in MYSQL_BIN_LOG::reset_logs:
first LOCK_thread_count and then LOCK_log.


mysql-test/suite/binlog/r/binlog_reset_master.result:
  added result file
mysql-test/suite/binlog/t/binlog_reset_master.test:
  Added test case that demonstrates deadlock because of wrong mutex order.
  The deadlock is between two threads:
   - RESET MASTER acquires mutexes in wrong order.
   - client thread shutdown code acquires mutexes in right order.
  Actually, this test case does not produce deadlock in 5.1, probably
  the client thread shutdown code does not hold both mutexes at the same
  time. However, the bug existed in 5.1 (mutexes are taken in the wrong
  order) so we push the test case to 5.1 too, to prevent future
  regressions.
sql/log.cc:
  Change mutex acquisition to the correct order:
  first LOCK_thread_count, then LOCK_log.
sql/mysqld.cc:
  Add debug code to synchronize test case.

Assertion happens due to missing NULL value check in
Item_func_round::fix_length_and_dec() function.
The fix: added NULL value check for second parameter.


mysql-test/r/func_math.result:
  test case
mysql-test/t/func_math.test:
  test case
sql/item_func.cc:
  added NULL value check for second parameter.

when selecting from I_S and views exist, in SP.

Symptoms: re-execution of prepared statement (or statement in a stored
routine) which read from one of I_S tables and which in order to fill
this I_S table had to open a view led to increasing memory consumption.

What happened in this situation was that during the process of view
opening for purpose of I_S filling view-related structures (like its
LEX) were allocated on persistent MEM_ROOT of prepared statement (or 
stored routine). Since this MEM_ROOT is not freed until prepared
statement deallocation (or expulsion of stored routine from the cache)
and code responsible for filling I_S is not able to re-use results of
view opening from previous executions this allocation ended up in
memory hogging.

This patch solves the problem by ensuring that when a view opened
for the purpose of I_S filling all its structures are allocated on
non-persistent runtime MEM_ROOT. This is achieved by activating a
temporary Query_arena bound to this MEM_ROOT.
Since this step makes impossible linking of view structures into
LEX of our prepared statement (or stored routine statement) this
patch also changes code filling I_S table to install a proxy LEX
before trying to open a view or a table. Consequently some code
which was responsible for backing-up/restoring parts of LEX when
view/table was opened during filling of I_S table became redundant
and was removed.

This patch doesn't contain test case for this bug as it is hard
to test memory hogging in our test suite.

Automerge mysql-5.1-gca into latest mysql-5.1.

              VM-WIN2003-32-A, SLES10-IA64-A 
      
The test case waits for master_pos_wait not to timeout, which
means that the deadlock between SQL and IO threads was 
succesfully and automatically dealt with.
      
However, very rarely, master_pos_wait reports a timeout. This
happens because the time set for master_pos_wait to wait was
too small (6 seconds). On slow test env this could be a 
problem.
      
We fix this by setting the timeout inline with the one used
in sync_slave_with_master (300 seconds). In addition we 
refactored the test case and refined some comments.

Issue:
While running embedded server, if client issues TEE command (\T foo/bar) and
"foo/bar" directory doesn't exist, it is suppose to give error. But it was
aborting.  This was happening because wrong error handler was being called.

Solution:
Modified calls to correct error handler. In embedded server case, there are 
two error handler (client and server) which are supposed to be called based 
on which context code is in. If it is in client context, client error handler
should be called otherwise server.

Test case:
Test case automation is not possible as current (following) code doesn't 
allow '\T' to be executed from command line (OR command read from a file):
[client/mysql.cc]
...
 static int
 com_tee(String *buffer __attribute__((unused)),
         char *line __attribute__((unused)))
 {
   char file_name[FN_REFLEN], *end, *param;

   if (status.batch) << THIS IS TRUE WHILE EXECUTING FROM COMMAND LINE.
      return 0;
 ...
So, not adding test case in GA. WIll add a test case in mysql-trunk after 
removing above code so that this could be properly tested before GA.

libmysqld/lib_sql.cc:
  Added code to call client/server error handler based on in control is in 
  client/server code respectively.
sql/mysql_priv.h:
  Added comments for THR_THD, THR_MALLOC keys.
sql/sql_class.cc:
  Function definition of new function restore_global to removes thread specific 
  data from stack (which was stored in store global).
sql/sql_class.h:
  Function declaration of new function restore_global.

               LEAK WITH PARTITIONED ARCHIVE TABLES

CHECK TABLE against archive table, when file descriptors
are exhausted, caused server crash.

Archive didn't handle errors when opening data file for
CHECK TABLE.

mysql-test/r/archive_debug.result:
  A test case for BUG#12402794.
mysql-test/t/archive_debug.test:
  A test case for BUG#12402794.
storage/archive/azio.c:
  A test case for BUG#12402794.
storage/archive/ha_archive.cc:
  Handle init_archive_reader() failure.

There are two problems:
1. There is a missing check for 'year' parameter(year can not be greater than 9999) in
   makedate function. fix: added check that year can not be greater than 9999.
2. There is a missing check for zero date in from_days() function.
   fix: added zero date check into Item_func_from_days::get_date()
   function.


mysql-test/r/func_time.result:
  test case
mysql-test/t/func_time.test:
  test case
sql/item_timefunc.cc:
  --added check that year can not be greater than 9999 for makedate() function
  --added zero date check into Item_func_from_days::get_date() function

In sql_class.cc, 'row_count', of type 'ha_rows', was used as last argument for
ER_TRUNCATED_WRONG_VALUE_FOR_FIELD which is
"Incorrect %-.32s value: '%-.128s' for column '%.192s' at row %ld".
So 'ha_rows' was used as 'long'.
On SPARC32 Solaris builds, 'long' is 4 bytes and 'ha_rows' is 'longlong' i.e. 8 bytes.
So the printf-like code was reading only the first 4 bytes.
Because the CPU is big-endian, 1LL is 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x01
so the first four bytes yield 0. So the warning message had "row 0" instead of
"row 1" in test outfile_loaddata.test:
-Warning	1366	Incorrect string value: '\xE1\xE2\xF7' for column 'b' at row 1
+Warning	1366	Incorrect string value: '\xE1\xE2\xF7' for column 'b' at row 0

All error-messaging functions which internally invoke some printf-life function
are potential candidate for such mistakes.
One apparently easy way to catch such mistakes is to use
ATTRIBUTE_FORMAT (from my_attribute.h).
But this works only when call site has both:
a) the format as a string literal
b) the types of arguments.
So:
  func(ER(ER_BLAH), 10);
will silently not be checked, because ER(ER_BLAH) is not known at
compile time (it is known at run-time, and depends on the chosen
language).
And
  func("%s", a va_list argument);
has the same problem, as the *real* type of arguments is not
known at this site at compile time (it's known in some caller).
Moreover,
  func(ER(ER_BLAH));
though possibly correct (if ER(ER_BLAH) has no '%' markers), will not
compile (gcc says "error: format not a string literal and no format
arguments").

Consequences:
1) ATTRIBUTE_FORMAT is here added only to functions which in practice
take "string literal" formats: "my_error_reporter" and "print_admin_msg".
2) it cannot be added to the other functions: my_error(),
push_warning_printf(), Table_check_intact::report_error(),
general_log_print().

To do a one-time check of functions listed in (2), the following
"static code analysis" has been done:
1) replace
  my_error(ER_xxx, arguments for substitution in format)
with the equivalent
  my_printf_error(ER_xxx,ER(ER_xxx), arguments for substitution in
format),
so that we have ER(ER_xxx) and the arguments *in the same call site*
2) add ATTRIBUTE_FORMAT to push_warning_printf(),
Table_check_intact::report_error(), general_log_print()
3) replace ER(xxx) with the hard-coded English text found in
errmsg.txt (like: ER(ER_UNKNOWN_ERROR) is replaced with
"Unknown error"), so that a call site has the format as string literal
4) this way, ATTRIBUTE_FORMAT can effectively do its job
5) compile, fix errors detected by ATTRIBUTE_FORMAT
6) revert steps 1-2-3.
The present patch has no compiler error when submitted again to the
static code analysis above.
It cannot catch all problems though: see Field::set_warning(), in
which a call to push_warning_printf() has a variable error
(thus, not replacable by a string literal); I checked set_warning() calls
by hand though.

See also WL 5883 for one proposal to avoid such bugs from appearing
again in the future.

The issues fixed in the patch are:
a) mismatch in types (like 'int' passed to '%ld')
b) more arguments passed than specified in the format.
This patch resolves mismatches by changing the type/number of arguments,
not by changing error messages of sql/share/errmsg.txt. The latter would be wrong,
per the following old rule: errmsg.txt must be as stable as possible; no insertions
or deletions of messages, no changes of type or number of printf-like format specifiers,
are allowed, as long as the change impacts a message already released in a GA version.
If this rule is not followed:
- Connectors, which use error message numbers, will be confused (by insertions/deletions
of messages)
- using errmsg.sys of MySQL 5.1.n with mysqld of MySQL 5.1.(n+1)
could produce wrong messages or crash; such usage can easily happen if
installing 5.1.(n+1) while /etc/my.cnf still has --language=/path/to/5.1.n/xxx;
or if copying mysqld from 5.1.(n+1) into a 5.1.n installation.
When fixing b), I have verified that the superfluous arguments were not used in the format
in the first 5.1 GA (5.1.30 'bteam@astra04-20081114162938-z8mctjp6st27uobm').
Had they been used, then passing them today, even if the message doesn't use them
anymore, would have been necessary, as explained above.

include/my_getopt.h:
  this function pointer is used only with "string literal" formats, so we can add
  ATTRIBUTE_FORMAT.
mysql-test/collections/default.experimental:
  test should pass now
sql/derror.cc:
  by having a format as string literal, ATTRIBUTE_FORMAT check becomes effective.
sql/events.cc:
  Change justified by the following excerpt from sql/share/errmsg.txt:
  ER_EVENT_SAME_NAME
          eng "Same old and new event name"
  ER_EVENT_SET_VAR_ERROR
          eng "Error during starting/stopping of the scheduler. Error code %u"
sql/field.cc:
  ER_TOO_BIG_SCALE 42000 S1009
          eng "Too big scale %d specified for column '%-.192s'. Maximum is %lu."
  ER_TOO_BIG_PRECISION 42000 S1009
          eng "Too big precision %d specified for column '%-.192s'. Maximum is %lu."
  ER_TOO_BIG_DISPLAYWIDTH 42000 S1009
          eng "Display width out of range for column '%-.192s' (max = %lu)"
sql/ha_ndbcluster.cc:
  ER_OUTOFMEMORY HY001 S1001
          eng "Out of memory; restart server and try again (needed %d bytes)"
  (sizeof() returns size_t)
sql/ha_ndbcluster_binlog.cc:
  Too many arguments for:
  ER_GET_ERRMSG  
          eng "Got error %d '%-.100s' from %s"
  Patch by Jonas Oreland.
sql/ha_partition.cc:
  print_admin_msg() is used only with a literal as format, so ATTRIBUTE_FORMAT
  works.
sql/handler.cc:
  ER_OUTOFMEMORY HY001 S1001
          eng "Out of memory; restart server and try again (needed %d bytes)"
  (sizeof() returns size_t)
sql/item_create.cc:
  ER_TOO_BIG_SCALE 42000 S1009
          eng "Too big scale %d specified for column '%-.192s'. Maximum is %lu."
  ER_TOO_BIG_PRECISION 42000 S1009
          eng "Too big precision %d specified for column '%-.192s'. Maximum is %lu."
  'c_len' and 'c_dec' are char*, passed as %d !! We don't know their value
  (as strtoul() failed), but they are likely big, so we use INT_MAX.
  'len' is ulong.
sql/item_func.cc:
  ER_WARN_DATA_OUT_OF_RANGE 22003 
          eng "Out of range value for column '%s' at row %ld"
  ER_CANT_FIND_UDF  
          eng "Can't load function '%-.192s'"
sql/item_strfunc.cc:
  ER_TOO_BIG_FOR_UNCOMPRESS  
          eng "Uncompressed data size too large; the maximum size is %d (probably, length of uncompressed data was corrupted)"
  max_allowed_packet is ulong.
sql/mysql_priv.h:
  sql_print_message_func is a function _pointer_.
sql/sp_head.cc:
  ER_SP_RECURSION_LIMIT
          eng "Recursive limit %d (as set by the max_sp_recursion_depth variable) was exceeded for routine %.192s"
  max_sp_recursion_depth is ulong
sql/sql_acl.cc:
  ER_PASSWORD_NO_MATCH 42000 
          eng "Can't find any matching row in the user table"
  ER_CANT_CREATE_USER_WITH_GRANT 42000
          eng "You are not allowed to create a user with GRANT"
sql/sql_base.cc:
  ER_NOT_KEYFILE  
          eng "Incorrect key file for table '%-.200s'; try to repair it"
  ER_TOO_MANY_TABLES  
          eng "Too many tables; MySQL can only use %d tables in a join"
  MAX_TABLES is size_t.
sql/sql_binlog.cc:
  ER_UNKNOWN_ERROR  
          eng "Unknown error"
sql/sql_class.cc:
  ER_TRUNCATED_WRONG_VALUE_FOR_FIELD  
          eng "Incorrect %-.32s value: '%-.128s' for column '%.192s' at row %ld"
  WARN_DATA_TRUNCATED 01000 
          eng "Data truncated for column '%s' at row %ld"
sql/sql_connect.cc:
  ER_HANDSHAKE_ERROR 08S01 
          eng "Bad handshake"
  ER_BAD_HOST_ERROR 08S01 
          eng "Can't get hostname for your address"
sql/sql_insert.cc:
  ER_WRONG_VALUE_COUNT_ON_ROW 21S01 
          eng "Column count doesn't match value count at row %ld"
sql/sql_parse.cc:
  ER_WARN_HOSTNAME_WONT_WORK  
          eng "MySQL is started in --skip-name-resolve mode; you must restart it without this switch for this grant to work"
  ER_TOO_HIGH_LEVEL_OF_NESTING_FOR_SELECT
  	eng "Too high level of nesting for select"
  ER_UNKNOWN_ERROR  
          eng "Unknown error"
sql/sql_partition.cc:
  ER_OUTOFMEMORY HY001 S1001
          eng "Out of memory; restart server and try again (needed %d bytes)"
sql/sql_plugin.cc:
  ER_OUTOFMEMORY HY001 S1001
          eng "Out of memory; restart server and try again (needed %d bytes)"
sql/sql_prepare.cc:
  ER_OUTOFMEMORY HY001 S1001
          eng "Out of memory; restart server and try again (needed %d bytes)"
  ER_UNKNOWN_STMT_HANDLER  
          eng "Unknown prepared statement handler (%.*s) given to %s"
  length value (for '%.*s') must be 'int', per the doc of printf()
  and the code of my_vsnprintf().
sql/sql_show.cc:
  ER_OUTOFMEMORY HY001 S1001
          eng "Out of memory; restart server and try again (needed %d bytes)"
sql/sql_table.cc:
  ER_TOO_BIG_FIELDLENGTH 42000 S1009
          eng "Column length too big for column '%-.192s' (max = %lu); use BLOB or TEXT instead"
sql/table.cc:
  ER_NOT_FORM_FILE  
          eng "Incorrect information in file: '%-.200s'"
  ER_COL_COUNT_DOESNT_MATCH_PLEASE_UPDATE
          eng "Column count of mysql.%s is wrong. Expected %d, found %d. Created with MySQL %d, now running %d. Please use mysql_upgrade to fix this error."
  table->s->mysql_version is ulong.
sql/unireg.cc:
  ER_TOO_LONG_TABLE_COMMENT
    eng "Comment for table '%-.64s' is too long (max = %lu)"
  ER_TOO_LONG_FIELD_COMMENT
    eng "Comment for field '%-.64s' is too long (max = %lu)"
  ER_TOO_BIG_ROWSIZE 42000 
          eng "Row size too large. The maximum row size for the used table type, not counting BLOBs, is %ld. You have to change some columns to TEXT or BLOBs"

      
Impementing Test Review Comment.
      
Bug test scenario:      
SELECT is not returning result set for "equal" (=) and "NULL safe equal
operator"  (<=>) on BIT data type. Extending this scenario for all data types