(From: gkodinov)
Use and int * where possible to scan for trailing space in a
string instead of always iterating char-by-char.
Using the attached benchmark file on a 32 bit Intel Core 2 
Duo CPU I've got 43485 ms run with the fix compared to 44373 
without it.

Backported to 5.6.0 (next-mr-runtime)
6.0-codebase revid: 2476.1362.1

is invalid to preporcessor conditionals. Instead use
the autoconf generated macro to test the presence.

------------------------------------------------------------
revno: 3405
revision-id: davi.arnaut@sun.com-20090626124624-m4wolyo5193j4cu7
parent: luis.soares@sun.com-20090626113019-1j4mn1jos480u9f3
committer: Davi Arnaut <Davi.Arnaut@Sun.COM>
branch nick: mysql-pe
timestamp: Fri 2009-06-26 09:46:24 -0300
message:
  Bug#45767: deprecate/remove Field::pack_key, Field::unpack_key, Field::pack_cmp
  
  Remove unused and dead code.
  
  Parts of the patch contributed by Zardosht Kasheff

------------------------------------------------------------
revno: 2476.784.4
revision-id: sp1r-davi@moksha.local-20071008114751-46069
parent: sp1r-davi@moksha.local-20071003002731-48537
committer: davi@moksha.local
timestamp: Mon 2007-10-08 08:47:51 -0300
message:
  Bug#27249 table_wild with alias: select t1.* as something

  Aliases to table wildcards are silently ignored, but they should
  not be allowed as it is non-standard and currently useless. There
  is not point in having a alias to a wildcard of column names.

  The solution is to rewrite the select_item rule so that aliases
  for table wildcards are not accepted.

  Contribution by Martin Friebe

------------------------------------------------------------
revno: 2597.4.17
revision-id: sp1r-davi@mysql.com/endora.local-20080328174753-24337
parent: sp1r-anozdrin/alik@quad.opbmk-20080328140038-16479
committer: davi@mysql.com/endora.local
timestamp: Fri 2008-03-28 14:47:53 -0300
message:
  Bug#15192 "fatal errors" are caught by handlers in stored procedures

  The problem is that fatal errors (e.g.: out of memory) were being
  caught by stored procedure exception handlers which could cause
  the execution to not be stopped due to a continue handler.

  The solution is to not call any exception handler if the error is
  fatal and send the fatal error to the client.

------------------------------------------------------------
revno: 3317
revision-id: davi.arnaut@sun.com-20090522170916-fzc5ca3tjs9roy1t
parent: patrick.crews@sun.com-20090522152933-ole8s3suy4zqyvku
committer: Davi Arnaut <Davi.Arnaut@Sun.COM>
branch nick: 41860-6.0
timestamp: Fri 2009-05-22 14:09:16 -0300
message:
  Bug#41860: Without Windows named pipe

  The problem was that the patch for Bug#10374 broke named pipe
  and shared memory transports on Windows due to a failure to
  implement a dummy poll method for transports other than BSD
  sockets. Another problem was that mysqltest lacked support
  for named pipe and shared memory connections, which lead to
  misleading test cases that were supposed run common queries
  over both transports.

  The solution is to properly implement, at the VIO layer, the
  poll and is_connected methods. The is_connected method is
  implemented for every suppported transport and the poll one
  only where it makes sense. Furthermore, support for named pipe
  and shared memory connections is added to mysqltest as to
  enable testing of both transports using the test suite.

------------------------------------------------------------
revno: 2597.37.3
revision-id: sp1r-davi@mysql.com/endora.local-20080328123626-16430
parent: sp1r-anozdrin/alik@quad.opbmk-20080327125300-11290
committer: davi@mysql.com/endora.local
timestamp: Fri 2008-03-28 09:36:26 -0300
message:
  Bug#10374 GET_LOCK does not let connection to close on the server side if it's aborted

  The problem is that the server doesn't detect aborted connections which
  are waiting on a lock or sleeping (user sleep), wasting system resources
  for a connection that is already dead.

  The solution is to peek at the connection every five seconds to verify if
  the connection is not aborted. A aborted connection is detect by polling
  the connection socket for available data to be read or end of file and in
  case of eof, the wait is aborted and the connection killed.

------------------------------------------------------------
revno: 2572.2.1
revision-id: sp1r-davi@mysql.com/endora.local-20080227225948-16317
parent: sp1r-anozdrin/alik@quad.-20080226165712-10409
committer: davi@mysql.com/endora.local
timestamp: Wed 2008-02-27 19:59:48 -0300
message:
  Bug#27525 table not found when using multi-table-deletes with aliases over several databas
  Bug#30234 Unexpected behavior using DELETE with AS and USING

  The multi-delete statement has a documented limitation that
  cross-database multiple-table deletes using aliases are not
  supported because it fails to find the tables by alias if it
  belongs to a different database. The problem is that when
  building the list of tables to delete from, if a database
  name is not specified (maybe an alias) it defaults to the
  name of the current selected database, making impossible to
  to properly resolve tables by alias later. Another problem
  is a inconsistency of the multiple table delete syntax that
  permits ambiguities in a delete statement (aliases that refer
  to multiple different tables or vice-versa).

  The first step for a solution and proper implementation of
  the cross-databse multiple table delete is to get rid of any
  ambiguities in a multiple table statement. Currently, the parser
  is accepting multiple table delete statements that have no obvious
  meaning, such as:

  DELETE a1 FROM db1.t1 AS a1, db2.t2 AS a1;
  DELETE a1 AS a1 FROM db1.t1 AS a1, db2.t2 AS a1;

  The solution is to resolve the left part of a delete statement
  using the right part, if the a table on right has an alias,
  it must be referenced in the left using the given alias. Also,
  each table on the left side must match unambiguously only one
  table in the right side.

------------------------------------------------------------
revno: 2630.2.13
revision-id: davi@mysql.com-20080612190452-cx6h7rm557bcq7sa
parent: davi@mysql.com-20080611124915-csejwrxfdga9upho
committer: Davi Arnaut <davi@mysql.com>
branch nick: 36785-6.0
timestamp: Thu 2008-06-12 16:04:52 -0300
message:
  Bug#36785: Wrong error message when group_concat() exceeds max length

  The problem is that when ER_CUT_VALUE_GROUP_CONCAT is elevated
  to a error, the message does not get updated with the number of
  cut lines when group_concat() exceeds max length.

  The solution is to modify the warning message to be more meaningful
  by giving the number of the line that was cut and to issue the warning
  for each line that is cut. This approach is inline with how other
  per-row truncated data warnings are issued avoids violating the warning
  internal interface.

------------------------------------------------------------
revno: 2618
revision-id: sp1r-davi@mysql.com/endora.local-20080418131946-26951
parent: sp1r-davi@mysql.com/endora.local-20080417190810-26185
committer: davi@mysql.com/endora.local
timestamp: Fri 2008-04-18 10:19:46 -0300
message:
  Bug#32140: wrong error code caught when an SF() call is interruped with KILL query

  The problem is that killing a query which calls a stored function
  could return a wrong error (table corrupt) instead of the query
  interrupted error message.

  The solution is to not set the table corrupt error if the query
  is killed, the query interrupted error message will be set  later
  when the query is finished.

------------------------------------------------------------
revno: 2630.39.3
revision-id: davi.arnaut@sun.com-20081210215359-i876m4zgc2d6rzs3
parent: kostja@sun.com-20081208222938-9es7wl61moli71ht
committer: Davi Arnaut <Davi.Arnaut@Sun.COM>
branch nick: 36649-6.0
timestamp: Wed 2008-12-10 19:53:59 -0200
message:
  Bug#36649: Condition area is not properly cleaned up after stored routine invocation

  The problem is that the diagnostics area of a trigger is not
  isolated from the area of the statement that caused the trigger
  invocation. In MySQL terms, it means that warnings generated
  during the execution of the trigger are not removed from the
  "warning area" at the end of the execution.

  Before this fix, the rules for MySQL message list life cycle (see
  manual entry for SHOW WARNINGS) did not apply to statements
  inside stored programs:

    - The manual says that the list of messages is cleared by a
      statement that uses a table (any table). However, such
      statement, if run inside a stored program did not clear the
      message list.
    - The manual says that the list is cleared by a statement that
      generates a new error or a warning, but this was not the case
      with stored program statements either and is changed to be the
      case as well.

  In other words, after this fix, a statement has the same effect
  on the message list regardless of whether it's executed inside a
  stored program/sub-statement or not.

  This introduces an incompatible change:

    - before this fix, a, e.g. statement inside a trigger could
      never clear the global warning list
    - after this fix, a trigger that generates a warning or uses a
      table, clears the global warning list
    - however, when we leave a trigger or a function, the caller's
      warning information is restored (see more on this below).

  This change is not backward compatible as it is intended to make
  MySQL behavior similar to the SQL standard behavior:

  A stored function or trigger will get its own "warning area" (or,
  in standard terminology, diagnostics area).  At the beginning of
  the stored function or trigger, all messages from the caller area
  will be copied to the area of the trigger.  During execution, the
  message list will be cleared according to the MySQL rules
  described on the manual (SHOW WARNINGS entry).  At the end of the
  function/trigger, the "warning area" will be destroyed along with
  all warnings it contains, except that if the last statement of
  the function/trigger generated messages, these are copied into
  the "warning area" of the caller.

  Consequently, statements that use a table or generate a warning
  *will* clear warnings inside the trigger, but that will have no
  effect to the warning list of the calling (outer) statement.

Correction of backport patch:
* Fixed signature of check_access_table() for embedded build
* Fixed typo for last argument in a check_access() call from UINT_MAX to 0.

------------------------------------------------------------
revno: 3624
revision-id: jon.hauglid@sun.com-20090928163426-2lg1gofzz44xzzxf
parent: alik@sun.com-20090928050057-r0a62x9czr01q7oe
committer: Jon Olav Hauglid <jon.hauglid@sun.com>
branch nick: mysql-6.0-codebase-bugfixing-bug47304
timestamp: Mon 2009-09-28 18:34:26 +0200
message:
  Bug #47304 Test main.mdl_sync fails on embedded server

  The problem was that SHOW PROCESSLIST was trying to access
  a thread that was not properly running and therefore had an 
  uninitialized mutex.

  This patch explicitly resets thd->mysys_var after each embedded
  server command to prevent the mutex from being accessed in an
  illegal state.

  The patch also re-enables lock_multi.test and mdl_sync.test for 
  embedded server as they had been disabled because of this bug.

------------------------------------------------------------
revno: 2617.31.21
revision-id: davi.arnaut@sun.com-20090402193933-2zbhg15kd0z3xh8r
parent: alik@sun.com-20090402081500-78l1hpkx03twe4bf
committer: Davi Arnaut <Davi.Arnaut@Sun.COM>
branch nick: 41971-6.0
timestamp: Thu 2009-04-02 16:39:33 -0300
message:
  Bug#41971: Thread state on embedded server is always "Writing to net"
 
  The problem is that the state of a thread on a embedded server is
  always displayed as "Writing to net", which is wrong as there is
  no "network" in the embedded server.

  The solution is only exclude, on a embedded server, the thread
  state conditions that are related to network operations. Other
  thread states related to waiting on conditions or other operations
  are preserved.

SIGWINCH is not defined in termios.h on HP/UX.

  
Added this option, named as "--dump-slave". The purpose of this option is to be
able to produce a dump from a slave used for making backups of the master. Originally,
dumping from the main master was fine, but as more data accumulated, the dump process
would take over 30 minutes, locking up the master database hence website for 30 minutes.
A slave dedicated to producing backups was the answer, but I needed a dump that could be

used to restore a slave instantly and in order to do that, it has to have three things 
contained in the dump:
  
  1. "STOP SLAVE;" at the beginning
  2. "CHANGE MASTER TO ...<the master - info from 'show slave status'>"
  3. "START SLAVE;" at the end
  
These options in this changeset contain this.
  
  --stop-slave adds "STOP SLAVE" to the beginning of the dump and "STOP SLAVE" 
  to the end of the dump.
  
  --include-host gives the user the option to have the host explicitely added
  to the "CHANGE MASTER TO ..." line.
  
  --dump-slave adds the "CHANGE MASTER ..." to the dump representing not the slave's
  master binlog info, but the slave's master's info from "SHOW SLAVE STATUS" 

  
Feature from Eric Bergen, CLA signed 2007-06-27.
  
Adds new mysql client option "--auto-vertical-output", which causes
the client to test whether a result table is too wide for the current
window (where available) and emit vertical results in that case.
Otherwise, it sends normal tabular results.

           deadlocks

Backport of revno: 2617.68.35

The problem was that if one connection is running a multi-statement 
transaction which involves a single partitioned table, and another 
connection attempts to alter the table to drop a non-existing partition,
(which of course will fail), the first connection still gets 
ER_LOCK_DEADLOCK and cannot proceed anymore.

This bug is no longer reproducable. This has also been tested with the
patch for Bug#46654 "False deadlock on concurrent DML/DDL with partitions, 
inconsistent behavior" which concerned a similar problem but where the 
ALTER TABLE is semantically correct.

Test case added in partition_sync.test.

      
Another code-path dropped sign of TIME, presuming all time is positive.
      
Minds sign now. Patch depends on ChangeSet for 42661.

Bug#42662: maketime() and signedness
      
Item_time_typecast::val_int() dropped sign from
MYSQL_TIME gotten using from get_time().
      
Propagates sign now.


Backported to 5.5.0  (6.0-codebase revid: 1810.3897.1)

      
When less than six places are given for microseconds, we zerofill from
the right (leftmost place is always 1/10s). We only did this when all
announced date/time fields were given; now we also format fractional
seconds when more significant fields are left out.

  
The presence of "--skip" parameters is obscure, when it should be
obvious from the text.
  
Now, for boolean options, when they're default to ON and the --skip
is more useful parameter, then tell the user of its existence.

Backported from 6.0-codebase, revid  2572.14.1

```---------------------------------------------------------
revno: 2599.178.12
revision-id: alik@mysql.com-20080812161845-we7cx9f22yrghob1
committer: Alexander Nozdrin <alik@mysql.com>
branch nick: 6.0-rt-build
timestamp: Tue 2008-08-12 20:18:45 +0400
message:
  Fix memory leak.
```

---------------------------------------------------------

Backport for 5.5

In non debug builds, the statements:
- SHOW PROCEDURE CODE
- SHOW FUNCTION CODE
used to fail with a "syntax error", which is misleading.

These statements have been changed to return the following error for non
debug builds:
ERROR HY000: The 'SHOW PROCEDURE|FUNCTION CODE' feature is disabled; you
need MySQL built with '--with-debug' to have it working

For debug builds (./configure --with-debug), nothing is changed.

Backport for 5.5

Backport to 5.5

      
When the query cache is disabled, the server shouldn't attempt to take the 
query cache mutex.
                             
By using the command line option --query_cache_type=0, the user can disable
   
(backport from mysql-pe)

per-file comments:
  mysql-test/r/mysql_upgrade.result
     result updated
  mysql-test/t/mysql_upgrade.test
     --skip-verbose option added to the call

Item_sum::set_aggregator() may be called multiple times during query preparation.
On subsequent calls: verify that the aggregator type is the same,
and re-use the existing Aggregator.

   (backport)
   mysql_upgrade script accepts --upgrade-system-tables option,
   fixing only system tables in this case.

per-file comments:
  client/mysql_upgrade.c
WL#4991 mysql_upgrade --fix-privilege-tables
    --upgrade-system-tables option added.
   if it is set, the tool won't look for the mysqlcheck then
   run_mysqlcheck_fixnames() and run_mysqlcheck_upgrade won't be called.
  mysql-test/r/mysql_upgrade.result
WL#4991 mysql_upgrade --fix-privilege-tables
    test result added
  mysql-test/t/mysql_upgrade.test
WL#4991 mysql_upgrade --fix-privilege-tables
    test case added