integral type. Use intptr which is designed to hold pointer values
and pass it to off_t.

mysys/stacktrace.c:
  Add a compile time assert to ensure that off_t is large enough
  to hold the pointer value.

The problem is that the logic which checks if a pointer is
valid relies on a poor heuristic based on the start and end
addresses of the data segment and heap.

Apart from miscalculating the heap bounds, this approach also
suffers from the fact that memory can come from places other
than the heap. See Bug#58528 for a more detailed explanation.

On Linux, the solution is to access the process's memory
through /proc/self/task/<tid>/mem, which allows for retrieving
the contents of pages within the virtual address space of
the calling process. If a address range is not mapped, a
input/output error is returned.

client/mysqltest.cc:
  Use new interface to my_safe_print_str.
include/my_stacktrace.h:
  Drop name from my_safe_print_str.
mysys/stacktrace.c:
  Access the process's memory through a file descriptor and
  dump the contents of the memory range. The file descriptor
  offset is equivalent to a offset into the address space.
  
  Do not print the name of the variable associated with the
  address. It can be better accomplished at a higher level.
sql/mysqld.cc:
  Put the variable dumping information within its own newline block.
  Use symbolic names which better convey information to the user.

the DROP statement ..."
      
Problem: When using temporary tables and closing a session, an
implicit DROP TEMPORARY TABLE IF EXISTS is written to the binary
log (while cleaning up the context of the session THD - see:
sql_class.cc:THD::cleanup which calls close_temporary_tables).
     
close_temporary_tables, first checks if the binary log is opened
and then proceeds to creating the DROP statements. Then, such
statements, are written to the binary log through
MYSQL_BIN_LOG::write(Log_event *). Inside, there is another check
if the binary log is opened and if not an error is returned. This
is where the faulty behavior is triggered. Given that the test
case replays a binary log, with temp tables statements, and right
after it issues RESET MASTER, there is a chance that is_open will
report false (when the mysql session is closed and the temporary
tables are written).
      
is_open may return false, because MYSQL_BIN_LOG::reset_logs is
not setting the correct flag (LOG_CLOSE_TO_BE_OPENED), on the
MYSQL_LOG_BIN::log_state (instead it sets just the
LOG_CLOSE_INDEX flag, leaving the log_state to
LOG_CLOSED). Thence, when writing the DROP statement as part of
the THD::cleanup, the thread could get a return value of false
for is_open - inside MYSQL_BIN_LOG::write, ultimately reporting
that it can't write the event to the binary log.
      
Fix: We fix this by adding the correct flag, missing in the
second close.

mysql-test/r/show_check.result:
  Fixed corrupted result file

metadata"
            
Improved error handling such that queries against Information_Schema.Tables won't
fail if a federated table can't make a remote connection.

mysql-test/r/merge.result:
  Updated with warnings that were previously masked.
mysql-test/r/show_check.result:
  Updated with warnings that were previously masked.
mysql-test/r/view.result:
  Updated with warnings that were previously masked.
sql/sql_show.cc:
  If get_schema_tables_record() encounters an error, push a warning,
  set the TABLE COMMENT column with the error text, and clear the
  error so that the operation can continue.

Improved error handling such that queries against Information_Schema.Tables won't
fail if a Federated table is unable to connect to remote host.



sql/sql_show.cc:
  If Handler::Info() fails, save error text in TABLE COMMENTS column, clear error.

will not display "indicated result file not found" due to wrongly named
var directory.

When using BINLOG statement to execute rows log events, session variables
foreign_key_checks and unique_checks are changed temporarily.  As each rows
log event has their own special session environment and its own
foreign_key_checks and unique_checks can be different from current session
which executing the BINLOG statement. But these variables are not restored
correctly after BINLOG statement. This problem will cause that the following
statements fail or generate unexpected data.

In this patch, code is added to backup and restore these two variables.
So BINLOG statement will not affect current session's variables again.


mysql-test/extra/binlog_tests/binlog.test:
  Add test to verify this patch.
mysql-test/suite/binlog/r/binlog_row_binlog.result:
  Add test to verify this patch.
mysql-test/suite/binlog/r/binlog_stm_binlog.result:
  Add test to verify this patch.
sql/sql_binlog.cc:
  Add code to backup and restore thd->options.

Problem: MySQL cp1251 did not support 'U+20AC EURO SIGN'
which was assigned a few years ago to 0x88.

Fix: adding mapping: 0x88 <-> U+20AC 

  @ mysql-test/include/ctype_8bit.inc
  New shared file to test 8bit character sets.

  @ mysql-test/r/ctype_cp1251.result
  @ mysql-test/t/ctype_cp1251.test
  Adding tests

  @ sql/share/charsets/cp1251.xml
  Adding mapping

  @ strings/ctype-extra.c
  Regenerating ctype-extra.c using strings/conf_to_src
  according to new cp1251.xml

After dropping and recreating the database specified along with --one-database
option at command line, mysql client keeps filtering the statements even after
the execution of a 'USE' command on the same database.

--one-database option enables the filtering of statements when the current
database is not the one specified at the command line. However, when the same
database is dropped and recreated the variable (current_db) that holds the
inital database name gets altered. This bug exploits the fact that current_db
initially gets set to null value (0) when a 'use db_name' follows the recreation
of same database db_name (speficied at the command line) and hence skip_updates
gets set to 1, which inturn triggers the further filtering of statements.

Fixed by making get_current_db() a no-op function when one_database is set,
and hence, under that condition current_db will not get altered.
Note, however the value of current_db can change when we execute 'connect'
command with a differnet database to reconnect to the server, in which case,
the behavior of --one-database will be formulated using this new database.


client/mysql.cc:
  Bug #54899 : --one-database option cannot handle DROP/CREATE DATABASE commands
  
  Added an if statement at the beginnning of get_current_db() , which makes it
  a no-op function if one-database option is specified, and hence current_db
  remains unchanged.
  
  Changed the help message for one-database option to a more appropriate message
  as specified in mysql documentation.
mysql-test/r/mysql.result:
  Added a test case for bug#54899 and some more test cases to
  check other one-database option related behaviors.
mysql-test/t/mysql.test:
  Added a test case for bug#54899 and some more test cases to
  check other one-database option related behaviors.

Fixed as suggested in the .inc file and two tests
Could not reproduce problem, but tested tests on Windows

It does work in general, the problem here was that the test name
'alter_table' matches 'main.alter_table-big' which has already been found.
Fixed by matching more explicitly (with/without suite name)

43233/55794.

mysql-test/r/change_user.result:
  Don't use -1 integer wrap around. It used to work, but now we do what's
  actually in the documentation. In tests, we now use DEFAULT or the
  numeral equivalent (as we do in the 5.6 tests).
mysql-test/r/key_cache.result:
  Can't drop default key case is an error now, not a warning, for compatibility
  with 5.6.
mysql-test/r/variables.result:
  Can't drop default key case is an error now, not a warning, for compatibility
  with 5.6.
mysql-test/t/change_user.test:
  Don't use -1 integer wrap around. It used to work, but now we do what's
  actually in the documentation. In tests, we now use DEFAULT or the
  numeral equivalent (as we do in the 5.6 tests).
mysql-test/t/key_cache.test:
  Can't drop default key case is an error now, not a warning, for compatibility
  with 5.6.
mysql-test/t/variables.test:
  Can't drop default key case is an error now, not a warning, for compatibility
  with 5.6.
sql/mysqld.cc:
  0 is a legal (albeit magic) value: "drop key cache."
sql/set_var.cc:
  bound_unsigned() can go now, it was just a kludge until things are done
  The Right Way, which they are now.
  
  Can't drop default key case is an error now, not a warning, for compatibility
  with 5.6.
tests/mysql_client_test.c:
  Don't use -1 integer wrap around. It used to work, but now we do what's
  actually in the documentation. In tests, we now use DEFAULT or the
  numeral equivalent (as we do in the 5.6 tests).

EXCEPTIONS-CLIENT from all the places.

If mysqltest dies, mtr waits to see if mysqld dies too within 100ms
But in that case, it should not care about expected crash
Fix: jump past the code that checks the expect file

Follow-up discussed with Reporter:
Avoid hard shutdown after test failure, if caused by server log warning
  AND we are running valgrind
More general pick-up of valgrind summaries, order may apparently vary
Do exit(1) if we did find valgrind summary warnings

In case of low memory sort buffer QUICK_INDEX_MERGE_SELECT creates
temporary file where is stores row ids which meet QUICK_SELECT ranges
except of clustered pk range, clustered range is processed separately.
In init_read_record we check if temporary file is used and choose
appropriate record access method. It does not take into account that
temporary file contains partial result in case of QUICK_INDEX_MERGE_SELECT
with clustered pk range.
The fix is always to use rr_quick if QUICK_INDEX_MERGE_SELECT
with clustered pk range is used.


mysql-test/suite/innodb/r/innodb_mysql.result:
  test case
mysql-test/suite/innodb/t/innodb_mysql.test:
  test case
mysql-test/suite/innodb_plugin/r/innodb_mysql.result:
  test case
mysql-test/suite/innodb_plugin/t/innodb_mysql.test:
  test case
sql/opt_range.h:
  added new method
sql/records.cc:
  The fix is always to use rr_quick if QUICK_INDEX_MERGE_SELECT
  with clustered pk range is used.

and related small fixes.

mysql-test/t/user_var.test:
  test for bug
sql/field_conv.cc:
  From the C standard, memcpy() has undefined behaviour if to->ptr==from->ptr
sql/item_func.cc:
  In the case of BUG#56138, entry->value==ptr in which case memcpy()
  has undefined results per the C standard.
sql/sql_select.cc:
  Work around a bug in old gcc

Although ICC identifies itself as GCC, even in version numbers,
it does not support the stpcpy built-in.

include/m_string.h:
  Work around ICC. Hacks...

 options/settings
 
 1. Changed the default value for socket on Windows to the windows
 default
 2. Removed hard-coded trailing slashes from innodb_data_home_dir
 and innodb_log_group_name_dir.
 3. Added extra backslashes to the innodb directory example
 4. Made the tempdir platform "dependent"
 5. Fixed the comments in the .ini files
 6. Removed the tmpdir from the templates and the scripts