- 12 Oct, 2009 2 commits
-
-
V Narayanan authored
Fixing copyright header in test collation file.
-
V Narayanan authored
In MySQL when the mapping for space is changed to something other than 0x20 by defining a different collation, then space is not ignored when comparing two strings. This was happening because the function that performs the comparison of two strings while ignoring ending spaces, was comparing the collation value of a space with the ascii value of the ' ' character. This should be changed to do comparison between the collated values.
-
- 09 Oct, 2009 9 commits
-
-
Sergey Vojtovich authored
-
Sergey Vojtovich authored
low myisam_sort_buffer_size Repair by sort (default) or parallel repair of a MyISAM table (doesn't matter partitioned or not) as well as bulk inserts and enable indexes some times didn't failover to repair with key cache. The problem was that after unsuccessful attempt, data file was closed. Whereas repair with key cache requires open data file. Fixed by reopening data file. Also fixed a valgrind warning, which may appear during repair by sort or parallel repair with certain myisam_sort_buffer_size number of rows and length of an index entry (very dependent).
-
Martin Hansson authored
-
Mattias Jonsson authored
Disable the test when it will not hit the open_files_limit
-
Martin Hansson authored
covering index When two range predicates were combined under an OR predicate, the algorithm tried to merge overlapping ranges into one. But the case when a range overlapped several other ranges was not handled. This lead to 1) ranges overlapping, which gave repeated results and 2) a range that overlapped several other ranges was cut off. Fixed by 1) Making sure that a range got an upper bound equal to the next range with a greater minimum. 2) Removing a continue statement
-
Mattias Jonsson authored
-
Mattias Jonsson authored
-
Mattias Jonsson authored
-
Magnus Blåudd authored
- Don't build split.c or debug.c since they are not part of the actual regex library
-
- 08 Oct, 2009 12 commits
-
-
Frazer Clement authored
-
Frazer Clement authored
-
Mattias Jonsson authored
backport for bug#44059 from mysql-pe to mysql-5.1-bugteam Using the partition with most rows instead of first partition to estimate the cardinality of indexes.
-
Mattias Jonsson authored
is reached Problem was bad error handling, leaving some new temporary partitions locked and initialized and some not yet initialized and locked, leading to a crash when trying to unlock the not yet initialized and locked partitions Solution was to unlock the already locked partitions, and not include any of the new temporary partitions in later unlocks
-
Georgi Kodinov authored
-
Georgi Kodinov authored
-
Magnus Blåudd authored
- Read plug.in to fid the name of the engine to link with, does not have to be same as engine dir - Use engine dir when figuring out which libraries to build limbysqld with
-
Magnus Blåudd authored
- Make it possible for the CmakeLists.txt files in an engine to use ${engine}_LIBS to set additional libraries to link with Example: NDBCLUSTER_LIBS = ndbclient
-
Magnus Blåudd authored
-
Ramil Kalimullin authored
can lead to bad memory access Problem: Field_bit is the only field which returns INT_RESULT and doesn't have unsigned flag. As it's not a descendant of the Field_num, so using ((Field_num *) field_bit)->unsigned_flag may lead to unpredictable results. Fix: check the field type before casting.
-
Magnus Blåudd authored
-
Magnus Blåudd authored
-
- 07 Oct, 2009 2 commits
-
-
Luis Soares authored
-
Georgi Kodinov authored
buffering is used FORCE INDEX FOR ORDER BY now prevents the optimizer from using join buffering. As a result the optimizer can use indexed access on the first table and doesn't need to sort the complete resultset at the end of the statement.
-
- 06 Oct, 2009 10 commits
-
-
Magnus Blåudd authored
- Remove mf_strip.c and the declaration of 'strip_sp'
-
Alfranio Correia authored
-
Kristofer Pettersson authored
-
Kristofer Pettersson authored
-
Kristofer Pettersson authored
-
Kristofer Pettersson authored
-
Kristofer Pettersson authored
The pthread_cond_wait implementations for windows might dead lock in some rare circumstances. 1) One thread (I) enter a timed wait and at a point in time ends up after mutex unlock and before WaitForMultipleObjects(...) 2) Another thread (II) enters pthread_cond_broadcast. Grabs the mutex and discovers one waiter. It set the broadcast event and closes the broadcast gate then unlocks the mutex. 3) A third thread (III) issues a pthread_cond_signal. It grabs the mutex, discovers one waiter, sets the signal event then unlock the mutex. 4) The first threads (I) enters WaitForMultipleObjects and finds out that the signal object is in a signalled state and exits the wait. 5) Thread (I) grabs the mutex and checks result status. The number of waiters is decreased and becomes equal to 0. The event returned was a signal event so the broadcast gate isn't opened. The mutex is released. 6) Thread (II) issues a new broadcast. The mutex is acquired but the number of waiters are 0 hence the broadcast gate remains closed. 7) Thread (I) enters the wait again but is blocked by the broadcast gate. This fix resolves the above issue by always resetting broadcast gate when there are no more waiters in th queue.
-
Georgi Kodinov authored
-
Alfranio Correia authored
Let - T be a transactional table and N non-transactional table. - B be begin, C commit and R rollback. - N be a statement that accesses and changes only N-tables. - T be a statement that accesses and changes only T-tables. In RBR, changes to N-tables that happen early in a transaction are not immediately flushed upon committing a statement. This behavior may, however, break consistency in the presence of concurrency since changes done to N-tables become immediately visible to other connections. To fix this problem, we do the following: . B N N T C would log - B N C B N C B T C. . B N N T R would log - B N C B N C B T R. Note that we are not preserving history from the master as we are introducing a commit that never happened. However, this seems to be more acceptable than the possibility of breaking consistency in the presence of concurrency.
-
Alfranio Correia authored
Let - T be a transactional table and N non-transactional table. - B be begin, C commit and R rollback. - M be a mixed statement, i.e. a statement that updates both T and N. - M* be a mixed statement that fails while updating either T or N. This patch restore the behavior presented in 5.1.37 for rows either produced in the RBR or MIXED modes, when a M* statement that happened early in a transaction had their changes written to the binary log outside the boundaries of the transaction and wrapped in a BEGIN/ROLLBACK. This was done to keep the slave consistent with with the master as the rollback would keep the changes on N and undo them on T. In particular, we do what follows: . B M* T C would log - B M* R B T C. Note that, we are not preserving history from the master as we are introducing a rollback that never happened. However, this seems to be more acceptable than making the slave diverge. We do not fix the following case: . B T M* C would log B T M* C. The slave will diverge as the changes on T tables that originated from the M statement are rolled back on the master but not on the slave. Unfortunately, we cannot simply rollback the transaction as this would undo any uncommitted changes on T tables. SBR is not considered in this patch because a failing statement is written to the binary along with the error code and a slave executes and then rolls back the statement when it has an associated error code, thus undoing the effects on T. In RBR and MBR, a full-fledged fix will be pushed after the WL 2687.
-
- 05 Oct, 2009 5 commits
-
-
John H. Embretsen authored
Mask part of EXPLAIN output with '#' to account for varying row count estimation.
-
Frazer Clement authored
-
Frazer Clement authored
-
Satya B authored
1. BUG#46256 - drop table with unknown collation crashes innodb Note: No testcase attached and has to be verified manually Detailed revision comments: r5799 | calvin | 2009-09-09 20:47:31 +0300 (Wed, 09 Sep 2009) | 10 lines branches/5.1: fix bug#46256 Allow tables to be dropped even if the collation is not found, but issue a warning. Could not find an easy way to add mysql-test since it requires changes to charsets and restarting the server. Tests were executed manually. Approved by: Heikki (on IM) r5805 | vasil | 2009-09-10 08:41:48 +0300 (Thu, 10 Sep 2009) | 7 lines branches/5.1: Fix a compilation warning caused by c5799: handler/ha_innodb.cc: In function 'void innobase_get_cset_width(ulint, ulint*, ulint*)': handler/ha_innodb.cc:830: warning: format '%d' expects type 'int', but argument 2 has type 'ulint'
-
Satya B authored
BUG#44369 - InnoDB: Does not uniformly disallow disallowed column names Detailed revision comments: r5741 | jyang | 2009-09-03 07:16:01 +0300 (Thu, 03 Sep 2009) | 5 lines branches/5.1: Block creating table with column name conflicting with Innodb reserved key words. (Bug #44369) rb://151 approved by Sunny Bains. r5760 | jyang | 2009-09-04 07:07:34 +0300 (Fri, 04 Sep 2009) | 3 lines branches/5.1: This is to revert change 5741. A return status for create_table_def() needs to be fixed. r5834 | jyang | 2009-09-11 00:43:05 +0300 (Fri, 11 Sep 2009) | 5 lines branches/5.1: Block creating table with column name conflicting with Innodb reserved key words. (Bug #44369) rb://151 approved by Sunny Bains.
-