- Don't save ndb_*_fs directory after test failure

 - Add name of error log file to the erro log table to get better
   erorr message when warning is found

 - Add debug prints for analyzing mkdir "Permission denied" failure

 - Rewrite "check testcase" to use LOAD DATA INFILE instead of 'load_file'
   in order to speed up the reading of the servers error log.

mysql-test/include/check-warnings.test:
  Use LOAD DATA to load the servers error log into error_log table and then
  call 'check_warning' stored procedure to filter out any unexpected warnings

The original goal of the test, as reported on BUG #25721, is to check whether 
a deadlock happens or not when concurrently CREATING/ALTERING/DROPPING the 
same server. For that a procedure (p1) is created that runs the exact same 
CREATE/ALTER/DROP statements for 10K iterations and two different connections 
(threads - t1 and t2) call p1 concurrently. At the end of the 10K iterations, 
the test checks if there was errors while running the loop (SELECT e >0).
      
The problem is that In some cases it may happen that one thread, t1, gets 
scheduled to execute with just enough time to complete the iteration and 
never bumps into the other thread t2. Meaning that t1 will never run into an 
SQL exception. On the other hand, the other thread, t2, may run into t1 and 
never issue any/part of its own statements because it will throw an SQLEXCEPTION. 
This is probably the case for failures where only one value differs.
      
Furthermore, there is a third scenario: both threads are scheduled to run 
interleaved for each iteration (or even one thread completes all iterations 
before the other starts). In this case, both will succeed without any error. 
This is probably the case for the failure that reports two different values.
      
This patch addresses the failure in pushbuild by removing the error counting 
and the printout (SELECT > 0) at the end of the test. A timeout should occur 
if the error that the test is checking surfaces.

 - Additional patch with improved protection by putting it all inside an "eval"
 - Calling 'hostpath' on a truncated socket may also croak.
 - Remove the need to create any directory parts of "path" inside the function.

 - Fix problem with for example ./mtr --timer, caused by new version of "Getopt::Long"
 - Evaluating the "$opt" variable as a string, returns the name of the parameter
   to be modified instead of "Getopt::Long::Callback" which is the class name

In mtr.check_warnings, `text` was declares as type text, which is
64K, and when the server log grows larger than this, it would be
truncated, and then check_warnings was actually checking the 
error messages of a previous test and complain warnings.

This patch fixed the problem by change the type of `text` to
mediumtext, which is 16M.

mysql-test/include/mtr_warnings.sql:
  change the type of `text` to mediumtext

SIGABRT is sent to relevant processes after a timeout


client/mysqltest.cc:
  Fixed signal handlers to mysqltest actually dumps core
mysql-test/lib/My/CoreDump.pm:
  Added support for dbx
mysql-test/lib/My/SafeProcess.pm:
  Added dump_core to force process to dump core
mysql-test/lib/My/SafeProcess/safe_process.cc:
  Traps SIGABRT and sends this on to child
mysql-test/mysql-test-run.pl:
  When test times out, force core dumps on mysqltest and servers

Log output of mysqltest when running check-testcase together
with errput. Remove --silent option for mysqltest when running
check-testcase/check-warnings


mysql-test/mysql-test-run.pl:
  Log output of mysqltest when runinng check-testcase together with errput.
  Remove --silent option for mysqltest when running check-testcase/check-warnings

sync_slave_with_master
 - Additional patch for "disconnect $variable"

Problem 1: The test waits for an error in the slave sql thread,
then resolves the error and issues 'start slave'. However, there
is a gap between when the error is reported and the slave sql
thread stops. If this gap was long, the slave would still be
running when 'start slave' happened, so 'start slave' would fail
and cause a test failure.
Fix 1: Made wait_for_slave_sql_error wait for the slave to stop
instead of wait for error in the IO thread. After stopping, the
error code is verified. If the error code is wrong, debug info
is printed. To print debug info, the debug printing code in
wait_for_slave_param.inc was moved out to a new file,
show_rpl_debug_info.inc.
Problem 2: rpl_stm_mystery22 is a horrible name, the comments in
the file didn't explain anything useful, the test was generally
hard to follow, and the test was essentially duplicated between
rpl_stm_mystery22 and rpl_row_mystery22.
Fix 2: The test is about conflicts in the slave SQL thread,
hence I renamed the tests to rpl_{stm,row}_conflicts. Refactored
the test so that the work is done in
extra/rpl_tests/rpl_conflicts.inc, and
rpl.rpl_{row,stm}_conflicts merely sets some variables and then
sourced extra/rpl_tests/rpl_conflicts.inc.
The tests have been rewritten and comments added.
Problem 3: When calling wait_for_slave_sql_error.inc, you always
want to verify that the sql thread stops because of the expected
error and not because of some other error. Currently,
wait_for_slave_sql_error.inc allows the caller to omit the error
code, in which case all error codes are accepted.
Fix 3: Made wait_for_slave_sql_error.inc fail if no error code
is given. Updated rpl_filter_tables_not_exist accordingly.
Problem 4: rpl_filter_tables_not_exist had a typo, the dollar
sign was missing in a 'let' statement.
Fix 4: Added dollar sign.
Problem 5: When replicating from other servers than the one named
'master', the wait_for_slave_* macros were unable to print debug
info on the master.
Fix 5: Replace parameter $slave_keep_connection by
$master_connection.


mysql-test/extra/rpl_tests/rpl_conflicts.test:
  rpl_stm_mystery22 and rpl_row_mystery22 have now been refactored and renamed:
  The two test cases rpl.rpl_stm_conflicts.test and rpl.rpl_row_conflicts.test
  just set some parameters, and then source include/rpl_tests/rpl_conflicts.test.
  Also, cleaned up the test case a bit, and fixed BUG#37718.
mysql-test/include/show_rpl_debug_info.inc:
  Factored out the debug printing code from wait_for_slave_param.inc to
  a new file, show_rpl_debug_info.inc.
  Also removed the $slave_keep_connection parameter, and replaced it by
  $master_connection. This allows printing debug info on the master, no
  matter what the name of the master connection is.
mysql-test/include/start_slave.inc:
  Replaced $slave_keep_connection by $master_connection.
mysql-test/include/stop_slave.inc:
  Replaced $slave_keep_connection by $master_connection.
mysql-test/include/sync_slave_io_with_master.inc:
  Replaced $slave_keep_connection by $master_connection.
mysql-test/include/wait_for_slave_io_to_start.inc:
  Replaced $slave_keep_connection by $master_connection.
mysql-test/include/wait_for_slave_io_to_stop.inc:
  Replaced $slave_keep_connection by $master_connection.
mysql-test/include/wait_for_slave_param.inc:
  Factored out the debug printing code from wait_for_slave_param.inc to
  a new file, show_rpl_debug_info.inc.
  Also removed the $slave_keep_connection parameter, and replaced it by
  $master_connection. This allows printing debug info on the master, no
  matter what the name of the master connection is.
  Had to move the printing of debug info out of the while loop because
  of BUG number 41913.
mysql-test/include/wait_for_slave_sql_error.inc:
  Made it wait until the slave sql thread has stopped. This
  takes very short time and avoids race condition bugs in
  test cases (e.g., fixes BUG#37718).
  Replaced $slave_keep_connection by $master_connection.
mysql-test/include/wait_for_slave_sql_error_and_skip.inc:
  Since wait_for_slave_sql_error now waits for the slave sql
  thread to stop too, wait_for_slave_sql_error_and_skip does not
  have to wait for the slave sql thread to stop.
  Also, since wait_for_slave_sql_error now requires the parameter
  $slave_sql_errno to be set, wait_for_slave_sql_error_and_skip
  requires that as well: updated the usage instructions.
mysql-test/include/wait_for_slave_sql_to_start.inc:
  Replaced $slave_keep_connection by $master_connection.
mysql-test/include/wait_for_slave_sql_to_stop.inc:
  Replaced $slave_keep_connection by $master_connection.
mysql-test/include/wait_for_slave_to_start.inc:
  Replaced $slave_keep_connection by $master_connection.
mysql-test/include/wait_for_slave_to_stop.inc:
  Replaced $slave_keep_connection by $master_connection.
mysql-test/suite/rpl/r/rpl_row_conflicts.result:
  update result file
mysql-test/suite/rpl/r/rpl_stm_conflicts.result:
  update result file
mysql-test/suite/rpl/t/rpl_dual_pos_advance.test:
  Replaced $slave_keep_connection by $master_connection.
mysql-test/suite/rpl/t/rpl_filter_tables_not_exist.test:
  Set $slave_sql_errno, since it is now required.
  Add dollar sign to $show_sql_error (without dollar sign,
  mtr makes it an environment variable).
mysql-test/suite/rpl/t/rpl_row_conflicts.test:
  rpl_stm_mystery22 and rpl_row_mystery22 have now been refactored and renamed:
  The two test cases rpl.rpl_stm_conflicts.test and rpl.rpl_row_conflicts.test
  just set some parameters, and then source include/rpl_tests/rpl_conflicts.test.
  Also, cleaned up the test case a bit, and fixed BUG#37718.
mysql-test/suite/rpl/t/rpl_row_mystery22.test:
  rpl_stm_mystery22 and rpl_row_mystery22 have now been refactored and renamed:
  The two test cases rpl.rpl_stm_conflicts.test and rpl.rpl_row_conflicts.test
  just set some parameters, and then source include/rpl_tests/rpl_conflicts.test.
  Also, cleaned up the test case a bit, and fixed BUG#37718.
mysql-test/suite/rpl/t/rpl_stm_conflicts.test:
  rpl_stm_mystery22 and rpl_row_mystery22 have now been refactored and renamed:
  The two test cases rpl.rpl_stm_conflicts.test and rpl.rpl_row_conflicts.test
  just set some parameters, and then source include/rpl_tests/rpl_conflicts.test.
  Also, cleaned up the test case a bit, and fixed BUG#37718.

conflicts:
  Text conflict in mysql-test/lib/mtr_report.pm
  Text conflict in mysql-test/mysql-test-run.pl

Problem: when mtr tries to create a directory, and the target
exists but is a file instead of directory, it tries several times
to create the directory again before it fails.
Fix: make it check if the target exists and is a non-directory.


mysql-test/lib/My/File/Path.pm:
  mkpath() now stops with appropriate error message if the target
  exists but is a non-directory.

If server has not been initialized as a slave (by CHANGE MASTER), then
SHOW SLAVE STATUS will return an empty set, and caused the waiting for
Slave_IO_running or Slave_SQL_running to 'No' fail.

This patch fixed the problem by return immediately if slave is not
initialized in include/wait_for_slave_*_to_stop.inc.


mysql-test/include/wait_for_slave_io_to_stop.inc:
  Return immediately if slave is not initialized
mysql-test/include/wait_for_slave_sql_to_stop.inc:
  Return immediately if slave is not initialized
mysql-test/include/wait_for_slave_to_stop.inc:
  Return immediately if slave is not initialized

mysqltest command 'shutdown_server' is supposed to shutdown the server
and wait for it to be gone, and kill it when timeout. But because the
arguments passed to my_kill were in the wrong order, 'shutdown_server'
does not wait nor kill the server at all. So after 'shutdown_server',
the server is still running, and the server may still accepting
connections.


mysql-test/include/mtr_warnings.sql:
  Suppress forcing close thread messages when server shuts down
mysql-test/include/restart_mysqld.inc:
  wait_until_disconnected.inc is not required after fix shutdown_server command

a minor improvement to the test to ease merging.

mysql-test/suite/rpl/r/rpl_server_id2.result:
  results changed.
mysql-test/suite/rpl/t/rpl_server_id2.test:
  masking out the until_pos which value is out of interest but
  it presence hurts merging between trees.

Bug#38540 rpl_server_id2 uses show slave status unnecessarily
            
Slave did not perform any event recorded into the relay log from some
different master when it was started with --replicate-same-server-id.
The reason appeared to be a consequence of BUG#38734 which stopped the
sql thread at its startup time.
      
The real fixes for the current bug are in the patch for BUG#38734.
This changeset carries only a regression test for the bugs.  Bug#38540
gets fixed too by means of eliminating an extra show slave status.


mysql-test/suite/rpl/r/rpl_server_id2.result:
  Bug#38934 Bug#38540 changed results.
mysql-test/suite/rpl/t/disabled.def:
  rpl_server_id2 is re-enabled.
mysql-test/suite/rpl/t/rpl_server_id2.test:
  regression test for BUG#38734 is added.
  Bug#38540 requirement to get rid of show slave status is implemented.

mysql-test/include/wait_until_disconnected.inc:
  Allow 2013 as an expected error code

Note that this result set is different from that in 6.0/6.0-rpl.