Detailed revision comments:

r6527 | vasil | 2010-01-29 14:39:48 +0200 (Fri, 29 Jan 2010) | 6 lines
branches/zip:

Extend the comment about row_mysql_handle_errors().

Suggested by:	Heikki

Detailed revision comments:

r6526 | jyang | 2010-01-28 18:12:40 +0200 (Thu, 28 Jan 2010) | 8 lines
branches/zip: Add index translation table to map mysql index
number to InnoDB index structure directly. Fix Bug #47622:
"the new index is added before the existing ones in MySQL,
but after one in SE".

rb://215, approved by Marko

Detailed revision comments:

r6525 | marko | 2010-01-28 16:23:15 +0200 (Thu, 28 Jan 2010) | 11 lines
branches/zip: buf_LRU_invalidate_tablespace(): Do not unnecessarily
acquire the block_mutex for every block in the LRU list. Only acquire
it when holding buf_pool_mutex is not sufficient. This should speed up
the function and considerably reduce traffic on the memory bus and
caches.

I noticed this deficiency when working on Issue #157.
This deficiency popped up again in Issue #449 (Bug #35077),
which this fix does not fully address.

rb://78 revision 1 approved by Heikki Tuuri.

Detailed revision comments:

r6521 | marko | 2010-01-27 10:49:01 +0200 (Wed, 27 Jan 2010) | 17 lines
branches/zip: Drop temporary tables at startup.
This addresses the third aspect of Bug #41609.

row_mysql_drop_temp_tables(): New function, to drop all temporary
tables. These can be distinguished by the least significant bit of
MIX_LEN. However, we will skip ROW_FORMAT=REDUNDANT tables, because in
the records for those tables, that bit may be garbage.

recv_recovery_from_checkpoint_finish(): Invoke
row_mysql_drop_temp_tables().  Normally, if the .frm files for the
temporary tables exist at startup, MySQL will ask InnoDB to drop the
temporary tables.  However, if the files are deleted, for instance, by
the boot scripts of the operating system, the tables would remain in
the InnoDB data dictionary unless someone digs them up by
innodb_table_monitor and creates .frm files for dropping the tables.

rb://221 approved by Sunny Bains.

Detailed revision comments:

r6498 | marko | 2010-01-21 11:22:52 +0200 (Thu, 21 Jan 2010) | 15 lines
branches/zip: buf_page_get_gen(): Obey recv_no_ibuf_operations
and do not call ibuf_merge_or_delete_for_page() in crash recovery,
before the redo log has been applied.
This could cure some hard-to-repeat, hard-to-explain bugs
related to secondary indexes.

A possible recipe to repeat the bug:

1. update a secondary index leaf page on a compressed table
2. evict the page from the buffer pool while it is still dirty
3. ibuf_insert() something for the page
4. crash
5. crash recovery; ibuf merge would be done too early,
before applying redo log to the sec index page or the ibuf pages

Detailed revision comments:

r6472 | calvin | 2010-01-16 01:53:47 +0200 (Sat, 16 Jan 2010) | 12 lines
branches/zip: Merge revisions 6425:6471 from branches/5.1
to pick up the first part fix of bug49396.

    ------------------------------------------------------------------------
    r6471 | calvin | 2010-01-15 17:43:27 -0600 (Fri, 15 Jan 2010) | 4 lines

    branches/5.1: fix bug#49396: main.innodb test fails in embedded mode

    Change replace_result by using $MYSQLD_DATADIR. Tested in both embedded
    mode and normal server mode.
    ------------------------------------------------------------------------

r6473 | calvin | 2010-01-16 01:58:16 +0200 (Sat, 16 Jan 2010) | 6 lines
branches/zip: fix bug#49396: innodb.innodb-index test fails in
embedded mode

This is 2nd part of the fix for bug#49396. The 1st part is
innodb.test. Tested in both embedded mode and normal server mode.

Detailed revision comments:

r6467 | inaam | 2010-01-14 20:46:00 +0200 (Thu, 14 Jan 2010) | 10 lines
branches/zip rb://226

log_sys->written_to_all_lsn does not accurately represent the LSN
upto which write and flush has taken place. Under a race condition
it can fall behind log_sys->flushed_to_disk_lsn which is accurate.
Besides written_to_all_lsn is redundant as currently InnoDB supports
only one log group.

Approved by: Heikki

Detailed revision comments:

r6463 | marko | 2010-01-14 15:43:37 +0200 (Thu, 14 Jan 2010) | 5 lines
branches/zip: page_copy_rec_list_end(), page_copy_rec_list_start():
Update PAGE_MAX_TRX_ID before attempting to compress the page.  This
fixes Issue #382 (a debug assertion failure in page_zip_reorganize())
and reduces the generated redo log.  There was no bug or crash in
non-debug builds.

Detailed revision comments:

r6449 | marko | 2010-01-13 22:38:53 +0200 (Wed, 13 Jan 2010) | 18 lines
branches/zip: lock_rec_validate_page(): Only validate the record
queues when the thread is not holding a space->latch.

When UNIV_DEBUG is defined while UNIV_SYNC_DEBUG is not,
latching order violations will still occur and deadlocks will be possible.

sync_thread_levels_nonempty_gen(): Renamed from
sync_thread_levels_empty_gen().  Return the violating latch or NULL
instead of FALSE or TRUE, except that there will be a ut_error before
the non-NULL return.

sync_thread_levels_empty_gen(): A macro that negates the return value of
sync_thread_levels_nonempty_gen().

sync_thread_levels_contains(): New function, based on
sync_thread_levels_nonempty_gen().

This should fix Issue #441.

Detailed revision comments:

r6447 | marko | 2010-01-13 17:43:44 +0200 (Wed, 13 Jan 2010) | 5 lines
branches/zip: row_sel_get_clust_rec_for_mysql(): On the READ UNCOMMITTED
isolation level, do not attempt to access a clustered index record
that has been marked for deletion.  This fixes Issue #433.

Approved by Heikki over the IM.

Detailed revision comments:

r6446 | marko | 2010-01-13 17:20:10 +0200 (Wed, 13 Jan 2010) | 3 lines
branches/zip: Treat mem_hash_mutex specially in mutex_free(),
and explicitly free mem_hash_mutex in mem_close().
This fixes the breakage of UNIV_MEM_DEBUG that was filed as Issue #434.

Detailed revision comments:

r6445 | marko | 2010-01-13 17:15:29 +0200 (Wed, 13 Jan 2010) | 3 lines
branches/zip: buf_pool_drop_hash_index(): Check block->page.state
before checking block->is_hashed, because the latter may be uninitialized
right after server startup.

Detailed revision comments:

r6433 | marko | 2010-01-13 13:19:00 +0200 (Wed, 13 Jan 2010) | 2 lines
branches/zip: dict_sys_tables_get_flags(), dict_create_sys_*_tuple():
Add some const qualifiers and comments.

Detailed revision comments:

r6426 | marko | 2010-01-12 15:36:14 +0200 (Tue, 12 Jan 2010) | 2 lines
branches/zip: row_sel_sec_rec_is_for_clust_rec(): Document the return value
more accurately.

Detailed revision comments:

r6425 | marko | 2010-01-12 13:47:11 +0200 (Tue, 12 Jan 2010) | 45 lines
branches/zip: Merge revisions 6350:6424 from branches/5.1:

  ------------------------------------------------------------------------
  r6421 | jyang | 2010-01-12 07:59:16 +0200 (Tue, 12 Jan 2010) | 8 lines
  Changed paths:
     M /branches/5.1/row/row0mysql.c

  branches/5.1: Fix bug #49238: Creating/Dropping a temporary table
  while at 1023 transactions will cause assert. Handle possible
  DB_TOO_MANY_CONCURRENT_TRXS when deleting metadata in
  row_drop_table_for_mysql().

  rb://220, approved by Marko
  ------------------------------------------------------------------------
  r6422 | marko | 2010-01-12 11:34:27 +0200 (Tue, 12 Jan 2010) | 3 lines
  Changed paths:
     M /branches/5.1/handler/ha_innodb.cc
     M /branches/5.1/handler/ha_innodb.h

  branches/5.1: Non-functional change:
  Make innobase_get_int_col_max_value() a static function.
  It does not access any fields of class ha_innobase.
  ------------------------------------------------------------------------
  r6424 | marko | 2010-01-12 12:22:19 +0200 (Tue, 12 Jan 2010) | 16 lines
  Changed paths:
     M /branches/5.1/handler/ha_innodb.cc
     M /branches/5.1/handler/ha_innodb.h

  branches/5.1: In innobase_initialize_autoinc(), do not attempt to read
  the maximum auto-increment value from the table if
  innodb_force_recovery is set to at least 4, so that writes are
  disabled. (Bug #46193)

  innobase_get_int_col_max_value(): Move the function definition before
  ha_innobase::innobase_initialize_autoinc(), because that function now
  calls this function.

  ha_innobase::innobase_initialize_autoinc(): Change the return type to
  void.  Do not attempt to read the maximum auto-increment value from
  the table if innodb_force_recovery is set to at least 4.  Issue
  ER_AUTOINC_READ_FAILED to the client when the auto-increment value
  cannot be read.

  rb://144 by Sunny, revised by Marko
  ------------------------------------------------------------------------

Detailed revision comments:

r6367 | marko | 2009-12-28 15:39:19 +0200 (Mon, 28 Dec 2009) | 2 lines
branches/zip: dict_index_add_to_cache(): Always free the index object,
also when returning DB_CORRUPTION.

Detailed revision comments:

r6348 | marko | 2009-12-22 11:04:34 +0200 (Tue, 22 Dec 2009) | 37 lines
branches/zip: Merge a change from MySQL:
r6351 | marko | 2009-12-22 11:11:18 +0200 (Tue, 22 Dec 2009) | 1 line
branches/zip: Remove an obsolete declaration of LOCK_thread_count.
r6352 | marko | 2009-12-22 12:33:01 +0200 (Tue, 22 Dec 2009) | 104 lines
branches/zip: Merge revisions 6206:6350 from branches/5.1,
except r6347, r6349, r6350 which were committed separately
to both branches, and r6310, which was backported from zip to 5.1.

  ------------------------------------------------------------------------
  r6206 | jyang | 2009-11-20 09:38:43 +0200 (Fri, 20 Nov 2009) | 3 lines
  Changed paths:
     M /branches/5.1/handler/ha_innodb.cc

  branches/5.1: Non-functional change, fix formatting.
  ------------------------------------------------------------------------
  r6230 | sunny | 2009-11-24 23:52:43 +0200 (Tue, 24 Nov 2009) | 3 lines
  Changed paths:
     M /branches/5.1/mysql-test/innodb-autoinc.result

  branches/5.1: Fix autoinc failing test results.
  (this should be skipped when merging 5.1 into zip)
  ------------------------------------------------------------------------
  r6231 | sunny | 2009-11-25 10:26:27 +0200 (Wed, 25 Nov 2009) | 7 lines
  Changed paths:
     M /branches/5.1/mysql-test/innodb-autoinc.result
     M /branches/5.1/mysql-test/innodb-autoinc.test
     M /branches/5.1/row/row0sel.c

  branches/5.1: Fix BUG#49032 - auto_increment field does not initialize to last value in InnoDB Storage Engine.

  We use the appropriate function to read the column value for non-integer
  autoinc column types, namely float and double.

  rb://208. Approved by Marko.
  ------------------------------------------------------------------------
  r6232 | sunny | 2009-11-25 10:27:39 +0200 (Wed, 25 Nov 2009) | 2 lines
  Changed paths:
     M /branches/5.1/row/row0sel.c

  branches/5.1: This is an interim fix, fix white space errors.
  ------------------------------------------------------------------------
  r6233 | sunny | 2009-11-25 10:28:35 +0200 (Wed, 25 Nov 2009) | 2 lines
  Changed paths:
     M /branches/5.1/include/mach0data.h
     M /branches/5.1/include/mach0data.ic
     M /branches/5.1/mysql-test/innodb-autoinc.result
     M /branches/5.1/mysql-test/innodb-autoinc.test
     M /branches/5.1/row/row0sel.c

  branches/5.1: This is an interim fix, fix tests and make read float/double arg const.
  ------------------------------------------------------------------------
  r6234 | sunny | 2009-11-25 10:29:03 +0200 (Wed, 25 Nov 2009) | 2 lines
  Changed paths:
     M /branches/5.1/row/row0sel.c

  branches/5.1: This is an interim fix, fix whitepsace issues.
  ------------------------------------------------------------------------
  r6235 | sunny | 2009-11-26 01:14:42 +0200 (Thu, 26 Nov 2009) | 9 lines
  Changed paths:
     M /branches/5.1/handler/ha_innodb.cc
     M /branches/5.1/mysql-test/innodb-autoinc.result
     M /branches/5.1/mysql-test/innodb-autoinc.test

  branches/5.1: Fix Bug#47720 - REPLACE INTO Autoincrement column with negative values.

  This bug is similiar to the negative autoinc filter patch from earlier,
  with the additional handling of filtering out the negative column values
  set explicitly by the user.

  rb://184
  Approved by Heikki.
  ------------------------------------------------------------------------
  r6242 | vasil | 2009-11-27 22:07:12 +0200 (Fri, 27 Nov 2009) | 4 lines
  Changed paths:
     M /branches/5.1/export.sh

  branches/5.1:

  Minor changes to support plugin snapshots.
  ------------------------------------------------------------------------
  r6306 | calvin | 2009-12-14 15:12:46 +0200 (Mon, 14 Dec 2009) | 5 lines
  Changed paths:
     M /branches/5.1/mysql-test/innodb-autoinc.result
     M /branches/5.1/mysql-test/innodb-autoinc.test

  branches/5.1: fix bug#49267: innodb-autoinc.test fails on windows
  because of different case mode

  There is no change to the InnoDB code, only to fix test case by
  changing "T1" to "t1".
  ------------------------------------------------------------------------
  r6324 | jyang | 2009-12-17 06:54:24 +0200 (Thu, 17 Dec 2009) | 8 lines
  Changed paths:
     M /branches/5.1/handler/ha_innodb.cc
     M /branches/5.1/include/lock0lock.h
     M /branches/5.1/include/srv0srv.h
     M /branches/5.1/lock/lock0lock.c
     M /branches/5.1/log/log0log.c
     M /branches/5.1/srv/srv0srv.c
     M /branches/5.1/srv/srv0start.c

  branches/5.1: Fix bug #47814 - Diagnostics are frequently not
  printed after a long lock wait in InnoDB. Separate out the
  lock wait timeout check thread from monitor information
  printing thread.

  rb://200 Approved by Marko.
  ------------------------------------------------------------------------
r6364 | marko | 2009-12-26 21:06:31 +0200 (Sat, 26 Dec 2009) | 4 lines
branches/zip: ibuf_bitmap_get_map_page():
Define a wrapper macro that passes __FILE__, __LINE__ of the caller
to buf_page_get_gen().
This will ease the diagnosis of the likes of Issue #135.

Detailed revision comments:

r6346 | marko | 2009-12-21 12:03:25 +0200 (Mon, 21 Dec 2009) | 2 lines
branches/zip: recv_recovery_from_checkpoint_finish():
Revert a change that was accidentally committed in r6345.

Detailed revision comments:

r6345 | marko | 2009-12-21 10:46:14 +0200 (Mon, 21 Dec 2009) | 7 lines
branches/zip: recv_scan_log_recs(): Non-functional change: Replace a
debug assertion ut_ad(len > 0) with ut_ad(len >= OS_FILE_LOG_BLOCK_SIZE).

This change is only for readability, for Issue #428.  Another
assertion on len being an integer multiple of OS_FILE_LOG_BLOCK_SIZE
already ensured together with the old ut_ad(len > 0) that actually len
must be at least OS_FILE_LOG_BLOCK_SIZE.

Detailed revision comments:

r6321 | marko | 2009-12-16 16:16:33 +0200 (Wed, 16 Dec 2009) | 4 lines
branches/zip: row_merge_drop_temp_indexes(): Revert a hack to
transaction isolation level that was made unnecessary by r5826 (Issue #337).
When this function is called, any active data dictionary transaction
should have been rolled back.

Detailed revision comments:

r6312 | marko | 2009-12-16 10:10:36 +0200 (Wed, 16 Dec 2009) | 6 lines
branches/zip: fil_close(): Add #ifndef UNIV_HOTBACKUP around a debug
assertion on mutex.magic_n.  InnoDB Hot Backup is a single-threaded
program and does not contain mutexes.  This change allows InnoDB Hot
Backup to be compiled with UNIV_DEBUG.

Suggested by Michael Izioumtchenko.

Detailed revision comments:

r6309 | marko | 2009-12-15 14:05:50 +0200 (Tue, 15 Dec 2009) | 3 lines
branches/zip: lock_rec_insert_check_and_lock(): Avoid casting away constness.
Use page_rec_get_next_const() instead. This silences a gcc 4.2.4 warning.
Reported by Sunny Bains.

Detailed revision comments:

r6305 | marko | 2009-12-14 13:03:57 +0200 (Mon, 14 Dec 2009) | 2 lines
branches/zip: row_undo_mod_del_unmark_sec_and_undo_update(): Add a missing
const qualifier.

Detailed revision comments:

r6285 | marko | 2009-12-09 09:24:50 +0200 (Wed, 09 Dec 2009) | 13 lines
branches/zip: row_sel_fetch_columns(): Remove redundant code that was
accidentally added in r1591, which introduced dfield_t::ext in order
to make the merge sort of fast index creation support externally
stored columns,

Initially, I tried to allocate the bit for dfield_t::ext from
dfield_t::len by making the length 31 bits and mapping UNIV_SQL_NULL
to something that would fit in it.  Then I decided that it would be
too risky.  The redundant check was part of the mapping.  The
condition may have been dfield_is_null() initially.

This redundant code was noticed by Sergey Petrunya on the MySQL
internals list.
r6288 | marko | 2009-12-09 09:51:00 +0200 (Wed, 09 Dec 2009) | 15 lines
branches/zip: row_upd_copy_columns(): Remove redundant code that was
accidentally added in r1591, which introduced dfield_t::ext in order
to make the merge sort of fast index creation support externally
stored columns.

Initially, I tried to allocate the bit for dfield_t::ext from
dfield_t::len by making the length 31 bits and mapping UNIV_SQL_NULL
to something that would fit in it.  Then I decided that it would be
too risky.  The redundant check was part of the mapping.  The
condition may have been dfield_is_null() initially.

This is similar to the redundant code in row_sel_fetch_columns() that
was noticed by Sergey Petrunya on the MySQL internals list and removed
in r6285.  As far as I can tell, there are no redundant UNIV_SQL_NULL
assignments remaining after this change.

Detailed revision comments:

r6277 | marko | 2009-12-08 11:13:36 +0200 (Tue, 08 Dec 2009) | 1 line
branches/zip: fsp0fsp.c: Add some missing in/out and const qualifiers.

Detailed revision comments:

r6275 | pekka | 2009-12-03 18:32:47 +0200 (Thu, 03 Dec 2009) | 10 lines
branches/zip: Minor changes which allow build with UNIV_HOTBACKUP
defined to succeed:

include/trx0sys.h: Allow Hot Backup build to see some
                   TRX_SYS_DOUBLEWRITE_... macros. 
trx/trx0sys.c:     Exclude trx_sys_close() function from Hot Backup build.
log/log0recv.[ch]: Exclude recv_sys_var_init() function from Hot Backup build.

This change should not affect !UNIV_HOTBACKUP build.

Detailed revision comments:

r6274 | marko | 2009-12-03 14:47:12 +0200 (Thu, 03 Dec 2009) | 6 lines
branches/zip: dict_table_check_for_dup_indexes(): Assert that the
data dictionary mutex is being held while table->indexes is accessed.
This is already the case.

Currently, only dict_table_get_next_index() and dict_table_get_first_index()
are being invoked without holding dict_sys->mutex.

Detailed revision comments:

r6272 | marko | 2009-12-02 11:46:05 +0200 (Wed, 02 Dec 2009) | 1 line
branches/zip: Revert changes that were accidentally committed in r6271.

Detailed revision comments:

r6271 | marko | 2009-12-02 11:43:49 +0200 (Wed, 02 Dec 2009) | 2 lines
branches/zip: ChangeLog: Document that since r6270, the zlib version number
will be displayed at start-up.

Detailed revision comments:

r6270 | marko | 2009-12-02 11:36:47 +0200 (Wed, 02 Dec 2009) | 1 line
branches/zip: innobase_start_or_create_for_mysql(): Log the zlib version.

Detailed revision comments:

r6269 | marko | 2009-12-02 11:35:22 +0200 (Wed, 02 Dec 2009) | 2 lines
branches/zip: innobase_start_or_create_for_mysql(): UNIV_IBUF_DEBUG
should not break crash recovery, but UNIV_IBUF_COUNT_DEBUG will.

Detailed revision comments:

r6264 | vasil | 2009-12-01 16:19:44 +0200 (Tue, 01 Dec 2009) | 1 line
branches/zip: Add ChangeLog entry for the release of 1.0.6.

Detailed revision comments:

r6263 | vasil | 2009-12-01 14:49:05 +0200 (Tue, 01 Dec 2009) | 4 lines
branches/zip: Increment version number from 1.0.6 to 1.0.7

1.0.6 has been released

Detailed revision comments:

r6252 | marko | 2009-11-30 12:50:11 +0200 (Mon, 30 Nov 2009) | 23 lines
branches/zip: Suppress errors about non-found temporary tables.
Write the is_temp flag to SYS_TABLES.MIX_LEN.

dict_table_t::flags: Add a flag for is_temporary, DICT_TF2_TEMPORARY.
Unlike other flags, this will not be written to the tablespace flags
or SYS_TABLES.TYPE, but only to SYS_TABLES.MIX_LEN.

dict_build_table_def_step(): Only pass DICT_TF_BITS to tablespaces.

dict_check_tablespaces_and_store_max_id(), dict_load_table():
Suppress errors about temporary tables not being found.

dict_create_sys_tables_tuple(): Write the DICT_TF2_TEMPORARY flag
to SYS_TABLES.MIX_LEN.

fil_space_create(), fil_create_new_single_table_tablespace(): Add assertions
about space->flags.

row_drop_table_for_mysql(): Do not complain about non-found temporary tables.

rb://160 approved by Heikki Tuuri.  This addresses the second part of
Bug #41609 Crash recovery does not work for InnoDB temporary tables.

Detailed revision comments:

r6248 | marko | 2009-11-30 12:19:50 +0200 (Mon, 30 Nov 2009) | 1 line
branches/zip: ChangeLog: Document r4922 that was forgotten.

Problem: EXPLAIN EXTENDED was trying to resolve references to 
freed temporary table fields for GROUP_CONCAT()'s ORDER BY arguments.

Fix: use stored original GROUP_CONCAT()'s arguments in such a case.

 function on windows
               
When making sure that the directory path ends up with a 
slash/backslash we need to check for the correct length of 
the buffer and trim at the appropriate location so we don't
write past the end of the buffer.

The crash is the result of an attempt made by JOIN::optimize to evaluate
the WHERE condition when no records have been actually read.
The fix is to remove erroneous 'outer_join' variable check.