storage/maria/ma_recovery.c:
  bugfix ("count" is meaningul only if printing messages)

plus printing a downcount of tables to flush).


storage/maria/ma_recovery.c:
  improving the progress message of recovery; it used to assume that
  if there is a non-zero UNDO phase then there was a non-REDO phase,
  and if there are tables to flush there was an UNDO phase,
  which is not always true. We now print a downcount of tables to flush
  (4 3 2 1 0).

* Preparation for having a background checkpoint thread:
frequency of checkpoint taken by that thread is now configurable
by the user: global variable maria_checkpoint_frequency, in seconds,
default 30 (checkpoint every 30th second); 0 means no checkpoints
(and thus no background thread, thus no background flushing, that
will probably only be used for testing).
* Don't take checkpoints in Recovery if it didn't do anything
significant; thus no checkpoint after a clean shutdown/restart. The
only checkpoint which is never skipped is the one at shutdown.
* fix for a test failure (after-merge fix)


include/maria.h:
  new variable
mysql-test/suite/rpl/r/rpl_row_flsh_tbls.result:
  result update
mysql-test/suite/rpl/t/rpl_row_flsh_tbls.test:
  position update (=after merge fix, as this position was already changed
  into 5.1 and not merged here, causing test to fail)
storage/maria/ha_maria.cc:
  Checkpoint's frequency is now configurable by the user:
  global variable maria_checkpoint_frequency. Changing it on the fly
  requires us to shutdown/restart the background checkpoint thread,
  as the loop done in that thread assumes a constant checkpoint
  interval. Default value is 30: a checkpoint every 30 seconds (yes, I
  know, physicists will remind that it should be named "period" then).
  ha_maria now asks for a background checkpoint thread when it starts,
  but this is still overruled (disabled) in ma_checkpoint_init().
storage/maria/ma_checkpoint.c:
  Checkpoint's frequency is now configurable by the user: background thread
  takes a checkpoint every maria_checkpoint_interval-th second.
  If that variable is 0, no checkpoints are taken.
  Note, I will enable the background thread only in a later changeset.
storage/maria/ma_recovery.c:
  Don't take checkpoints at the end of the REDO phase and at the end of
  Recovery if Recovery didn't make anything significant (didn't open
  any tables, didn't rollback any transactions).
  With this, after a clean shutdown, Recovery shouldn't take any
  checkpoint, which makes starting faster (we save a few fsync()s of
  the log and control file).

into  gbichot4.local:/home/mysql_src/mysql-maria-tmp


storage/maria/ma_loghandler.c:
  Auto merged

into  desktop.sanja.is.com.ua:/home/bell/mysql/bk/work-maria-bug

into  janus.mylan:/usr/home/serg/Abk/mysql-maria1

into  janus.mylan:/usr/home/serg/Abk/mysql-maria1


Makefile.am:
  Auto merged
client/mysqldump.c:
  Auto merged
configure.in:
  Auto merged
libmysqld/Makefile.am:
  Auto merged
mysql-test/mysql-test-run.pl:
  Auto merged
mysql-test/r/mysqldump.result:
  Auto merged
mysql-test/t/disabled.def:
  Auto merged
mysql-test/t/mysqldump.test:
  Auto merged
mysys/mf_tempfile.c:
  Auto merged
sql/Makefile.am:
  Auto merged
sql/ha_partition.cc:
  Auto merged
sql/ha_partition.h:
  Auto merged
sql/handler.cc:
  Auto merged
sql/lock.cc:
  Auto merged
sql/sql_parse.cc:
  Auto merged
sql/sql_plugin.cc:
  Auto merged
sql/sql_select.cc:
  Auto merged
sql/sql_table.cc:
  Auto merged
sql/table.cc:
  Auto merged
sql/table.h:
  Auto merged
BUILD/compile-dist:
  SCCS merged

  fixed uninit memory access in SET pluginvar=DEFAULT
innodb_mysql.test, innodb_mysql.result:
  test case for SET pluginvar=DEFAULT


mysql-test/r/innodb_mysql.result:
  test case for SET pluginvar=DEFAULT
mysql-test/t/innodb_mysql.test:
  test case for SET pluginvar=DEFAULT
sql/sql_plugin.cc:
  fixed uninit memory access in SET pluginvar=DEFAULT

  use mysqltest builtins instead of --exec. Fixes a failing test too :)


mysql-test/suite/rpl/include/rpl_mixed_dml.inc:
  use mysqltest builtins instead of --exec. Fixes a failing test too :)

  do link_sources only once


sql/Makefile.am:
  do link_sources only once
libmysql_r/Makefile.am:
  do link_sources only once

moved debugging defines.
Fixed buffer flushing (we copied last page
content before it was actually written, now
we abvance pointer in new buffer and unlock
it while waiting for filling old buffer)

Misc changes:
- fix for benign Valgrind error, compiler warnings
- fix for a segfault in execution of maria_delete_all_rows() and one
when taking multiple checkpoints
- fix for too paranoid assertion
- adding ability to take checkpoints at the end of the REDO phase
and at the end of recovery.
- other minor changes


storage/maria/ha_maria.cc:
  The checkpoint done after Recovery is finished, is moved to
  maria_recover().
storage/maria/ma_bitmap.c:
  fix for Valgrind error: the "shadow debug copy" of the bitmap page
  started unitialized and so ma_print_bitmap() would use it uninitialized
storage/maria/ma_checkpoint.c:
  * reset pointers to NULL after freeing them, or we segfault at
  next checkpoint in my_realloc().
  * fix for compiler warnings.
storage/maria/ma_delete_all.c:
  info->trn is NULL for non-transactional tables
storage/maria/ma_locking.c:
  correct assertion (it fired wrongly in execution of REDO_DROP_TABLE
  due to the maria_extra(HA_PREPARE_FOR_DROP)->_ma_decrement_open_count()
  ->maria_lock_database(F_UNLCK); another solution would have been to
  not call _ma_decrement_open_count() (it's ok to have a wrong open
  count in a table which we are dropping), but the same problem
  would still exist for REDO_RENAME_TABLE.
storage/maria/ma_loghandler.c:
  fail early if UNRECOVERABLE_ERROR
storage/maria/ma_recovery.c:
  * new argument to maria_apply_log(): should it take checkpoints
  (at end of REDO phase and at the very end) or no.
  * moving the call to translog_next_LSN() into
  parse_checkpoint_record() ("hide the details").
  * Refining an error detection for something which could happen
  if there is a checkpoint record in the log.
  * Using close_one_table() instead of maria_extra(HA_EXTRA_PREPARE_FOR_DROP|RENAME),
  as it looks safer, and also changing how close_one_table() works:
  it now limits itself to scanning all_tables[], thus having one loopp
  instead of two, which should be faster (as a result, it does not
  close tables not registered in this array, which is ok as there
  should not be any).
storage/maria/ma_recovery.h:
  new parameter
storage/maria/maria_read_log.c:
  update to new prototype

Debug output information fixed.
Fixed direct page referencing in write mode.


storage/maria/ma_loghandler.c:
  TODO added.
storage/maria/ma_pagecache.c:
  Debug output information fixed.
  Fixed direct page referencing in write mode.

note: this does *not* move pagecache* variables.


sql/mysqld.cc:
  remove maria_* variables from the server, declare them in ha_maria.cc
sql/set_var.cc:
  remove maria_* variables from the server, declare them in ha_maria.cc
sql/sql_class.h:
  remove maria_* variables from the server, declare them in ha_maria.cc
sql/sql_plugin.cc:
  bugfix: support for ENUM/SET thd local plugin variables
storage/maria/ha_maria.cc:
  remove maria_* variables from the server, declare them in ha_maria.cc

storage/maria/ma_test1.c:
  typo (?) fixed

into  janus.mylan:/usr/home/serg/Abk/mysql-5.1

into  a88-113-38-195.elisa-laajakaista.fi:/home/my/bk/mysql-maria.prod


BUILD/SETUP.sh:
  Auto merged
sql/opt_range.cc:
  Auto merged
sql/sql_insert.cc:
  Auto merged
storage/maria/ha_maria.cc:
  Auto merged
storage/maria/ma_check.c:
  Auto merged
storage/maria/ma_create.c:
  Auto merged
storage/maria/ma_delete.c:
  Auto merged
storage/maria/ma_open.c:
  Auto merged
storage/maria/ma_update.c:
  Auto merged
storage/maria/ma_write.c:
  Auto merged
storage/maria/maria_chk.c:
  Auto merged
storage/maria/maria_def.h:
  Auto merged
storage/maria/ma_pagecache.c:
  Manual merge with maria tree.
storage/myisam/sort.c:
  Manual merge with maria tree.

storage/maria/ma_test1.c:
  After merge fixes. Applied changes made in myisam manually to maria.
  
  Fixed memory leak.
storage/maria/ma_test2.c:
  After merge fixes. Applied changes made in myisam manually to maria.
  
  Fixed memory leak.

into  trift2.:/MySQL/M51/push-5.1


storage/ndb/test/ndbapi/testScanFilter.cpp:
  Auto merged

into  trift2.:/MySQL/M50/push-5.0

into  production.mysql.com:/usersnfs/jperkin/bk/build/5.1


mysql-test/mysql-test-run.pl:
  Auto merged
scripts/mysql_install_db.sh:
  Auto merged

into  production.mysql.com:/usersnfs/jperkin/bk/bug-27692/5.0

were accidentally removed during a previous rototill of this
code.  Fixes bug#27692.
  
While it can be argued we should strive to provide a 'secure by
default' installation, this happens to be the setup currently
documented in the manual as the default, so defer changes that
improve security out of the box to a co-ordinated effort later
on.
  
For now, make a note about the test databases and anonymous user
in mysql_install_db and recommend that mysql_secure_installation
be ran for users wishing to remove these defaults.

[..re-commit of previously lost change..]


scripts/mysql_system_tables_data.sql:
  Add anonymous accounts.
scripts/mysql_install_db.sh:
  Point users at the mysql_secure_installation script.
mysql-test/mysql-test-run.pl:
  Add a comment where removing anonymous users.

* Thanks to Serg's tip, we fix here the compilation issue of
REDO_REPAIR_TABLE's execution, by defining versions of
_ma_killed_ptr() and _ma_check_print_info|warning|error()
in maria_read_log.c (we move those of maria_chk.c into an include
file and include it in maria_chk.c and maria_read_log.c).
Execution of such record looks like working from my tests (it only
happens in maria_read_log; recovery-from-mysqld skips DDLs and
REPAIR is considered DDL here as it bypasses logging): tested
ALTER TABLE ENABLE KEYS and then remove table, apply log: that
did a repair.
* Recent changes broke maria_read_log a bit: -a became default
and -o caused error; fixing this.


storage/maria/Makefile.am:
  addind new file
storage/maria/ma_recovery.c:
  enable execution of REDO_REPAIR_TABLE by maria_read_log now that
  it compiles. Now reason to keep only T_QUICK from testflag.
storage/maria/maria_chk.c:
  moving these functions to ma_check_standalone.h for reusability
storage/maria/maria_def.h:
  comment
storage/maria/maria_read_log.c:
  ma_check_standalone.h needs my_progname_short.
  Fixing bug where "maria_read_log" would default to -a and
  "maria_read_log -o" would throw an error. Implemented behaviour is:
  - no options: usage()
  - -a : applys, applys UNDOs by default unless --disable-undo
  - -o : only prints
storage/maria/ma_check_standalone.h:
  All standalone programs which need to use functions from ma_check.c
  (like maria_repair()) must define their version of _ma_killed_ptr()
  and _ma_check_print_info|warning|error(). Indeed, linking with ma_check.o
  brings in the dependencies of ma_check.o which are definitions of the above
  functions; if the program does not define them then the ones of
  ha_maria.o are used i.e. ha_maria.o is linked into the program, and this
  brings dependencies of ha_maria.o on mysqld.o into the program's linking
  which thus fails, as the program is not linked with mysqld.o.
  We put in this file the functions which maria_chk.c uses, so that
  they can be reused by maria_read_log (when it replays REDO_REPAIR_TABLE)
  as they are good enough (they just print to stdout/stderr like
  maria_read_log already does).

   Updated variable size arrays to use vector like Jonas did for 5.1 so that my build would not break


ndb/test/ndbapi/testScanFilter.cpp:
   Updated variable size arrays to use vector like Jonas did for 5.1 so that my build would not break

storage/maria/ma_pagecache.c:
  pagecache->blocks is now long, takes 8 bytes on some platforms.
  The cast to ulonglong in int8store is for those platforms where
  ulong is 32-bit and int8store uses some << shifts, if there are
  (x<<40 is undefined if x is 32-bit).
storage/maria/ma_recovery.c:
  this change corresponds to the one done in ma_pagecache.c: number
  of dirty pages is stored in 8 bytes.

* Recovery of the table's live checksum (CREATE TABLE ... CHECKSUM=1)
is achieved in this patch. The table's live checksum
(info->s->state.state.checksum) is updated in inwrite_rec_hook's
under the log mutex when writing UNDO_ROW_INSERT|UPDATE|DELETE
and REDO_DELETE_ALL. The checksum variation caused by the operation
is stored in these UNDOs, so that the REDO phase, when it sees such
UNDOs, can update the live checksum if it is older (state.is_of_lsn is
lower) than the record. It is also used, as a nice add-on with no
cost, to do less row checksum computation during the UNDO phase
(as we have it in the record already).
Doing this work, it became pressing to move in-write hooks
(write_hook_for_redo() et al) to ma_blockrec.c.
The 'parts' argument of inwrite_rec_hook is unpredictable (it comes
mangled at this stage, for example by LSN compression) so it is
replaced by a 'void* hook_arg', which is used to pass down information,
currently only to write_hook_for_clr_end() (previous undo_lsn and
type of undone record).
* If from ha_maria, we print to stderr how many seconds (with one
fractional digit) the REDO phase took, same for UNDO phase and for
final table close. Just to give an indication for debugging and maybe
also for Support.


storage/maria/ha_maria.cc:
  question for Monty
storage/maria/ma_blockrec.c:
  * log in-write hooks (write_hook_for_redo() etc) move from
  ma_loghandler.c to here; this is natural: the hooks are coupled
  to their callers (functions in ma_blockrec.c).
  * translog_write_record() now has a new argument "hook_arg";
  using it to pass down to write_hook_for_clr_end() the transaction's
  previous_undo_lsn and the type of the being undone record, and also
  to pass down to all UNDOs the live checksum variation caused by the
  operation.
  * If table has live checksum, store in UNDO_ROW_INSERT|UPDATE|DELETE
  and in CLR_END the checksum variation ("delta") caused by the
  operation. For example if a DELETE caused the table's live checksum
  to change from 123 to 456, we store in the UNDO_ROW_DELETE, in 4 bytes,
  the value 333 (456-123).
  * Instead of hard-coded "1" as length of the place where we store
  the undone record's type in CLR_END, use a symbol CLR_TYPE_STORE_SIZE;
  use macros clr_type_store and clr_type_korr.
  * write_block_record() has a new parameter 'old_record_checksum'
  which is the pre-computed checksum of old_record; that value is used
  to update the table's live checksum when writing UNDO_ROW_UPDATE|CLR_END.
  * In allocate_write_block_record(), if we are executing UNDO_ROW_DELETE
  the row's checksum is already computed.
  * _ma_update_block_record2() now expect the new row's checksum into
  cur_row.checksum (was already true) and the old row's checksum into
  new_row.checksum (that's new). Its two callers, maria_update() and
  _ma_apply_undo_row_update(), honour this.
  * When executing an UNDO_ROW_INSERT|UPDATE|DELETE in UNDO phase, pick
  up the checksum delta from the log record. It is then used to update
  the table's live checksum when writing CLR_END, and saves us a
  computation of record.
storage/maria/ma_blockrec.h:
  in-write hooks move from ma_loghandler.c
storage/maria/ma_check.c:
  more straightforward size of buffer
storage/maria/ma_checkpoint.c:
  <= is enough
storage/maria/ma_commit.c:
  new prototype of translog_write_record()
storage/maria/ma_create.c:
  new prototype of translog_write_record()
storage/maria/ma_delete.c:
  The row's checksum must be computed before calling(*delete_record)(),
  not after, because it must be known inside _ma_delete_block_record()
  (to update the table's live checksum when writing UNDO_ROW_DELETE).
  If deleting from a transactional table, live checksum was already updated
  when writing UNDO_ROW_DELETE.
storage/maria/ma_delete_all.c:
  @todo is now done (in ma_loghandler.c)
storage/maria/ma_delete_table.c:
  new prototype of translog_write_record()
storage/maria/ma_loghandler.c:
  * in-write hooks move to ma_blockrec.c.
  * translog_write_record() gets a new argument 'hook_arg' which is
  passed down to pre|inwrite_rec_hook. It is more useful that 'parts'
  for those hooks, because when those hooks are called, 'parts' has
  possibly been mangled (like with LSN compression) and is so
  unpredictable.
  * fix for compiler warning (unused buffer_start when compiling without
  debug support)
  * Because checksum delta is stored into UNDO_ROW_INSERT|UPDATE|DELETE
  and CLR_END, but only if the table has live checksum, these records
  are not PSEUDOFIXEDLENGTH anymore, they are now VARIABLE_LENGTH (their
  length is X if no live checksum and X+4 otherwise).
  * add an inwrite_rec_hook for UNDO_ROW_UPDATE, which updates the
  table's live checksum. Update it also in hooks of UNDO_ROW_INSERT|
  DELETE and REDO_DELETE_ALL and CLR_END.
  * Bugfix: when reading a record in translog_read_record(), it happened
  that "length" became negative, because the function assumed that
  the record extended beyond the page's end, whereas it may be shorter.
storage/maria/ma_loghandler.h:
  * Instead of hard-coded "1" and "4", use symbols and macros
  to store/retrieve the type of record which the CLR_END corresponds
  to, and the checksum variation caused by the operation which logs the
  record
  * translog_write_record() gets a new argument 'hook_arg' which is
  passed down to pre|inwrite_rec_hook. It is more useful that 'parts'
  for those hooks, because when those hooks are called, 'parts' has
  possibly been mangled (like with LSN compression) and is so
  unpredictable.
storage/maria/ma_open.c:
  fix for "empty body in if() statement" (when compiling without safemutex)
storage/maria/ma_pagecache.c:
  <= is enough
storage/maria/ma_recovery.c:
  * print the time that each recovery phase (REDO/UNDO/flush) took;
  this is enabled only when recovering from ha_maria. Is it printed
  n seconds with a fractional part of one digit (like 123.4 seconds).
  * In the REDO phase, update the table's live checksum by using
  the checksum delta stored in UNDO_ROW_INSERT|DELETE|UPDATE and CLR_END.
  Update it too when seeing REDO_DELETE_ALL.
  * In the UNDO phase, when executing UNDO_ROW_INSERT, if the table does
  not have live checksum then reading the record's header (as done by
  the master loop of run_undo_phase()) is enough; otherwise we
  do a translog_read_record() to have the checksum delta ready
  for _ma_apply_undo_row_insert().
  * When at the end of the REDO phase we notice that there is an unfinished
  group of REDOs, don't assert in debug binaries, as I verified that it
  can happen in real life (with kill -9)
  * removing ' in #error as it confuses gcc3
storage/maria/ma_rename.c:
  new prototype of translog_write_record()
storage/maria/ma_test_recovery.expected:
  Change in output of ma_test_recovery: now all live checksums of
  original tables equal those of tables recreated by the REDO phase
  and those of tables fixed by the UNDO phase. I.e. recovery of
  the live checksum looks like working (which was after all the only
  goal of this changeset).
  I checked by hand that it's not just all live checksums which are
  now 0 and that's why they match. They are the old values like
  3757530372. maria.test has hard-coded checksum values in its result
  file so checks this too.
storage/maria/ma_update.c:
  * It's useless to put up HA_STATE_CHANGED in 'key_changed',
  as we put up HA_STATE_CHANGED in info->update anyway.
  * We need to compute the old and new rows' checksum before calling
  (*update_record)(), as checksum delta must be known when logging
  UNDO_ROW_UPDATE which is done by _ma_update_block_record(). Note that
  some functions change the 'newrec' record (at least _ma_check_unique()
  does) so we cannot move the checksum computation too early in the
  function.
storage/maria/ma_write.c:
  If inserting into a transactional table, live's checksum was
  already updated when writing UNDO_ROW_INSERT. The multiplication
  is a trick to save an if().
storage/maria/unittest/ma_test_loghandler-t.c:
  new prototype of translog_write_record()
storage/maria/unittest/ma_test_loghandler_first_lsn-t.c:
  new prototype of translog_write_record()
storage/maria/unittest/ma_test_loghandler_max_lsn-t.c:
  new prototype of translog_write_record()
storage/maria/unittest/ma_test_loghandler_multigroup-t.c:
  new prototype of translog_write_record()
storage/maria/unittest/ma_test_loghandler_multithread-t.c:
  new prototype of translog_write_record()
storage/maria/unittest/ma_test_loghandler_noflush-t.c:
  new prototype of translog_write_record()
storage/maria/unittest/ma_test_loghandler_pagecache-t.c:
  new prototype of translog_write_record()
storage/maria/unittest/ma_test_loghandler_purge-t.c:
  new prototype of translog_write_record()
storage/myisam/sort.c:
  fix for compiler warnings in pushbuild (write_merge_key* functions
  didn't have their declaration match MARIA_HA::write_key).

into  desktop.sanja.is.com.ua:/home/bell/mysql/bk/work-maria-recovery

storage/maria/ma_loghandler.c:
  Debug output adder to control scanner freeing.
  Fixed problem with scanner destruction (unpinned page in the cache).

in CREATE SELECT only if the table is not temporary (because
re-enabling causes a commit). In the future we should disable
again for temporary tables; that will probably require changing
ha_enable_transaction().


sql/sql_insert.cc:
  When we disable transactionality in CREATE SELECT, we re-enable it
  at the end and this causes a commit (inside ha_enable_transaction());
  but this is undesired if the created table is temporary (we don't
  want CREATE TEMPORARY TABLE SELECT to commit all previous statements).
  So we disable logging only if the table is not temporary.
  Ideally in the future we would want to lift this restriction which
  sounds stupid, but for Maria it does not matter now (temporary
  tables are not transactional yet).

into  mysql.com:/home/kent/bk/make-install/mysql-5.1-build

  Added special handling of "mysql_install_db" and "mysql.server" scripts,
  find executables relative to the current directory.


scripts/make_binary_distribution.sh:
  Added special handling of "mysql_install_db" and "mysql.server" scripts,
  find executables relative to the current directory.

gprof build for amd64.


storage/maria/ma_loghandler.c:
  fater way to detect last page address for the last log file.
BUILD/compile-amd64-gprof-no-ndb:
  New BitKeeper file ``BUILD/compile-amd64-gprof-no-ndb''

  SCCS merged


storage/maria/ma_recovery.c:
  SCCS merged

into  trift2.:/MySQL/M51/push-5.1


configure.in:
  5.0 version change does not affect 5.1 - "use local".

into  trift2.:/MySQL/M50/push-5.0

Add the cleanup by dropping the database 'track' in test "rpl_bug31076".


mysql-test/suite/rpl/r/rpl_bug31076.result:
  Fix bug#31150 "Test case does not cleanup":
  Drop the database 'track' which was newly created for this test.
mysql-test/suite/rpl/t/rpl_bug31076.test:
  Fix bug#31150 "Test case does not cleanup":
  Drop the database 'track' which was newly created for this test.

into  trift2.:/MySQL/M51/push-5.1