.

software/ors-amarisoft/XXX-instance-gnb-input-schema.json

@@ -3,83 +3,6 @@
   "$schema": "http://json-schema.org/draft-04/schema",
   "title": "Input Parameters",
   "properties": {
-    "nr_bandwidth": {
-      "title": "Bandwidth",
-      "description": "Downlink Bandwidth (in MHz)",
-      "type": "number",
-      "default": {{ default_nr_bandwidth }}
-    },
-    "n_antenna_dl": {
-      "title": "Number of DL antennas",
-{%- if bbu == 'ors' %}
-      "description": "1 or 2. Number of DL antennas.",
-{%- else %}
-      "description": "1, 2, 4 or 8. Number of DL antennas.",
-{%- endif %}
-      "type": "number",
-      "default": {{ default_n_antenna_dl }}
-    },
-    "n_antenna_ul": {
-      "title": "Number of UL antennas",
-{%- if bbu == 'ors' %}
-      "description": "1 or 2. Number of UL antennas.",
-{%- else %}
-      "description": "1, 2, 4 or 8. Number of UL antennas.",
-{%- endif %}
-      "type": "number",
-      "default": {{ default_n_antenna_ul }}
-    },
-{%- if rf_mode == 'tdd' %}
-    "tdd_ul_dl_config": {
-      "title": "TDD",
-      "description": "TDD",
-      "type": "string",
-      "enum": [
-        "5ms 2UL 7DL 4/6 (default)",
-        "2.5ms 1UL 3DL 2/10",
-        "5ms 8UL 1DL 2/10 (maximum uplink)"
-      ],
-      "default": "5ms 2UL 7DL 4/6 (default)"
-    },
-{%- endif %}
-    "dl_nr_arfcn": {
-      "title": "DL NR ARFCN",
-      "description": "Downlink NR Absolute Radio Frequency Channel Number of the cell",
-      "type": "number"
-    },
-    "nr_band": {
-      "title": "NR band",
-      "description": "NR band number",
-      "type": "number"
-    },
-    "ssb_pos_bitmap": {
-      "title": "SSB Position Bitmap",
-      "description": "SSB position bitmap in bits (4, 8 or 64 bits depending on the DL frequency).",
-      "type": "string",
-      "default": {{ default_nr_ssb_pos_bitmap }}
-    },
-    "pci": {
-      "title": "Physical Cell ID",
-      "description": "Physical Cell ID",
-      "type": "number",
-      "default": 500
-    },
-    "cell_id": {
-      "title": "Cell ID",
-      "description": "Cell ID",
-      "type": "string",
-      "default": "0x01"
-    },
-    "tx_gain": {
-      "title": "Tx gain",
-      "description": "Tx gain (in dB)",
-      "type": "number"
-    },
-    "rx_gain": {
-      "title": "Rx gain",
-      "description": "Rx gain (in dB)",
-      "type": "number"
-    },
     "gnb_id": {
       "title": "gNB ID",
       "description": "gNB ID",
@@ -266,80 +189,6 @@
       },
       "type": "object",
       "default": {}
-    },
-    "websocket_password": {
-      "title": "Websocket password",
-      "description": "Activates websocket for remote control and sets password",
-      "type": "string"
-    },
-    "inactivity_timer": {
-      "title": "Inactivity Timer",
-      "description": "Send RRC connection release after this time (in ms) of network inactivity.",
-      "type": "number",
-      "default": {{ default_nr_inactivity_timer }}
-    },
-    "log_phy_debug": {
-      "title": "Physical layer log debug",
-      "description": "Enable debug mode for physical layer logs",
-      "type": "boolean",
-      "default": false
-    },
-    "gps_sync": {
-      "default": false,
-      "title": "GPS synchronisation",
-      "description": "True if GPS should be used for synchronisation",
-      "type": "boolean"
-    },
-    "disable_sdr": {
-      "default": false,
-      "title": "Disable SDR",
-      "description": "Disables radio",
-      "type": "boolean"
-    },
-    "use_ipv4": {
-      "default": false,
-      "title": "Use IPv4",
-      "description": "Set to true to use IPv4 for AMF / MME addresses",
-      "type": "boolean"
-    },
-    "gnb_stats_fetch_period": {
-      "title": "gNB statistics fetch period (seconds)",
-      "description": "Describes how often a call to Amarisoft remote API is made to get gNB statistics",
-      "type": "number",
-      "default": 60
-    },
-    "gnb_drb_stats_enabled": {
-      "title": "Enable gNB drb statistics",
-      "description": "Enable gNB drb statistics through 100Hz polling, needed for E-UTRAN IP Throughput KPI",
-      "type": "boolean",
-      "default": true
-    },
-    "max_rx_sample_db": {
-      "title": "Maximum RX sample value (dB)",
-      "description": "Maximum RX sample threshold above which RX saturated promise will fail",
-      "type": "number",
-      "default": 0
-    },
-    "min_rxtx_delay": {
-      "title": "Minimum available time for radio front end processing (ms)",
-      "description": "Baseband latency promise will fail if minimum TX/RX diff reaches threshold (lower than this value)",
-      "type": "number",
-      "default": 0
-    },
-    "xlog_fluentbit_forward_host": {
-      "title": "Address to Forward Xlog by Fluenbit",
-      "description": "Address of Remote Fluentd or Fluentbit Server to Forward Xlog",
-      "type": "string"
-    },
-    "xlog_fluentbit_forward_port": {
-      "title": "Port to Forward Xlog by Fluentbit",
-      "description": "Optional Port of Remote Fluentd or Fluentbit Server to Forward Xlog",
-      "type": "string"
-    },
-    "xlog_fluentbit_forward_shared_key": {
-      "title": "Shared Key to Forward Xlog by Fluentbit",
-      "description": "Secret Key Shared with Remote Fluentd or Fluentbit Server for Authentication when Forwarding Xlog",
-      "type": "string"
     }
   }
 }

software/ors-amarisoft/instance-enb-input-schema.json

@@ -119,7 +119,7 @@
     },
     "disable_sdr": {
       "default": false,
-      "title": "Disable SDR",
+      "title": "Disable SDR  XXX kill ?",
       "description": "Disables radio",
       "type": "boolean"
     },
@@ -130,8 +130,8 @@
       "type": "boolean"
     },
     "enb_stats_fetch_period": {
-      "title": "eNB statistics fetch period (seconds)",
-      "description": "Describes how often a call to Amarisoft remote API is made to get eNB statistics",
+      "title": "eNB/gNB statistics fetch period (seconds)",
+      "description": "Describes how often a call to Amarisoft remote API is made to get eNB/gNB statistics",
       "type": "number",
       "default": 60
     },