This brings ZODB/go updates to support Python3 from
neo!8 that we will need to
support Python3(*). For now do not add any py3 support on wcfs side - just
update neo/go with preserving wcfs/py2 in working state.

Note that this ZODB/go update brings backward incompatible changes to
activate StrictUnicode and PyDict modes(+) on unpickling and also changes
API of zodb.Map to follow that PyDict mode. We thus need to update
go bits inside wcfs because else compilation and tests, expectedly,
start to break in the following ways

    # lab.nexedi.com/nexedi/wendelin.core/wcfs/internal/xbtree/xbtreetest
    internal/xbtree/xbtreetest/treeenv.go:292:24: zroot.Data undefined (type *zodb.Map has no field or method Data)

    # lab.nexedi.com/nexedi/wendelin.core/wcfs/internal/zdata [lab.nexedi.com/nexedi/wendelin.core/wcfs/internal/zdata.test]
    ./δftail_test.go:737:16: zroot.Data undefined (type *zodb.Map has no field or method Data)

    --- FAIL: TestZBlk (0.00s)
        --- FAIL: TestZBlk/py2_pickle1 (0.00s)
    panic: ZBlk0(0000000000000002): loadBlkData: wendelin.bigfile.file_zodb.ZBlk0(0000000000000002): activate: pysetstate: expect str; got ogórek.ByteString [recovered]
            panic: ZBlk0(0000000000000002): loadBlkData: wendelin.bigfile.file_zodb.ZBlk0(0000000000000002): activate: pysetstate: expect str; got ogórek.ByteString

    --- FAIL: TestΔFtail (0.98s)
    panic: root['treegen/values']: key ["a"]: expected str, got ogórek.ByteString [recovered]
            panic: file:///tmp/TestΔFtail4275282346/001/1.fs: @03fb8a25642d1e88: get blktab: root['treegen/values']: key ["a"]: expected str, got ogórek.ByteString [recovered]
            panic: file:///tmp/TestΔFtail4275282346/001/1.fs: @03fb8a25642d1e88: get blktab: root['treegen/values']: key ["a"]: expected str, got ogórek.ByteString

    --- FAIL: TestΔBTail (1.13s)
    panic: root['treegen/values']: key ["a"]: expected str, got ogórek.ByteString [recovered]
            panic: file:///tmp/TestΔBTail3238267558/001/1.fs: @03fb8a212cd06933: get blktab: root['treegen/values']: key ["a"]: expected str, got ogórek.ByteString [recovered]
            panic: file:///tmp/TestΔBTail3238267558/001/1.fs: @03fb8a212cd06933: get blktab: root['treegen/values']: key ["a"]: expected str, got ogórek.ByteString

The changes are minimal just to keep wcfs/py2 working ok. We will do more changes in the follow-up patches to support py3.

All the changes in go.mod and go.sum are produced automatically by sole `go get lab.nexedi.com/kirr/neo/go@t+ypy3`.

(*) see neo@efde5253...6235fb60 for full list of changes.
(+) see neo@078b6262, neo@1e87fe5b,
    https://github.com/kisielk/og-rek/pull/68 and https://github.com/kisielk/og-rek/pull/75 for details.

Our "as int64" code was put into ogórek as generalized utility in
https://github.com/kisielk/og-rek/commit/010fbd2e.

Going from v1.2.0 to e691997e3596 brings in StrictUnicode + PyDict modes and other
improvements: https://github.com/kisielk/og-rek/compare/v1.2.0...e691997e3596. We will
need those improvements in the next patches.

Previously we were testing ZBlk loading on Go side only with data generated by
python2 and pickle protocol=2. However even on py2 there are more pickle
protocols that are in use, and also there is python3.

-> Modernize testdata/zblk_test_gen.py to use run_with_all_zodb_pickle_kinds
   that was recently added as part of nexedi/zodbtools@f9d36ba7
   and generate test data with both python2 and python3. It is handy to
   use py2py3-venv(*) to prepare python environment to do that.

   Adjust tests on Go side to verify how ZBlk is loaded for all generated zkinds.

py2_pickle1, py2_pickle2 and py2_pickle3 are handled well.
ZBlk test for py3_pickle3 currently fails with

        --- FAIL: TestZBlk/py3_pickle3 (0.01s)
    panic: ZBlk0(0000000000000002): loadBlkData: wendelin.bigfile.file_zodb.ZBlk0(0000000000000002): activate: pysetstate: expect str; got ogórek.Bytes [recovered]

and so is marked with "xfail".

We will fix tests for py3_pickle3 in follow-up patches.

(*) see nexedi/zodbtools@fac2f190

/reviewed-by @kirr
/reviewed-on nexedi/wendelin.core!32

This patch updates NEO/go to include a patch that fixes
non-deterministic crashs for 'wendelin.core'. Its tradeoff is however a
moderate memory leak. This leak is going to be fixed later when a new
golang version is released. See more details about this here:
neo@ee23551d

/reviewed-by @kirr
/reviewed-on nexedi/wendelin.core!32

sendReq has two phases: a) send request, and b) read reply. When there
is an error on the first phase, e.g. client does not read what wcfs is
trying to send, it returns an error like

    pin #2 @03fb63abd6d65b33: sendReq: send .2: context deadline exceeded

however when there is an error on the second phase, e.g. client does not
reply to wcfs request, it currently returns an error like

    pin #2 @03fb63abd6d65b33: sendReq: context deadline exceeded

which is not clear to interpret about which part was problematic.

After this patch the error for the second case becomes

    pin #2 @03fb63abd6d65b33: sendReq: waiting for reply: context deadline exceeded

which is easier to interpret.

/reviewed-by @levin.zimmermann
/reviewed-on nexedi/wendelin.core!31

This patch updates:

- github.com/golang/glog: we already wanted to do so in
    nexedi/wendelin.core!23,
    but we deferred it to keep go 1.18 support. However in recent patches
    we already dropped go 1.18 support and we can therefore update glog now.
- lab.nexedi.com/kirr/neo/go: add fix in handshake, see here for more information:
    neo@d75f4ac2 and
    neo@03db1d8a

This patch doesn't update:

- github.com/hanwen/go-fuse: This was updated upstream and Kirill already
    reviewed and integrated patches in custom branch. However when updating
    go-fuse to v2.4.3-0.20240904154523-9546fc238dc6 (this is
    go-fuse@9546fc23),
    WCFS tests fail on my machine [1] => let's defer update
- github.com/kisielk/og-rek: there are new patches that will be needed
    in the future, but we didn't update NEO/go og-rek dependency yet,
    so let's defer the update in wendelin.core until we updated og-rek
    in NEO/go
- github.com/johncgriffin/overflow: no update on upstream
- github.com/pkg/errors: no update on upstream
- github.com/stretchr/testify: This was already updated with
    nexedi/wendelin.core@c559ec1a
    'testify' seems to have a major release in the future which may break
    some of our test code, but for now major version 1 is still the
    stable release.

----
kirr: I confirm that
go-fuse@9546fc23 brings in
regression to WCFS tests. It seems I missed some error in that go-fuse
update and it will need to be bisected and debugged.

---

[1] Test failure log:

========================================== FAILURES ==========================================
______________________________________ test_wcfs_basic _______________________________________

    @func
    def test_wcfs_basic():
        t = tDB(); zf = t.zfile
        defer(t.close)

        # >>> lookup non-BigFile -> must be rejected
        with raises(OSError) as exc:
            t.wc._stat("head/bigfile/%s" % h(t.nonzfile._p_oid))
        assert exc.value.errno == EINVAL

        # >>> file initially empty
        f = t.open(zf)
        f.assertCache([])
        f.assertData ([], mtime=t.at0)

        # >>> (@at1) commit data -> we can see it on wcfs
        at1 = t.commit(zf, {2:'c1'})

        f.assertCache([0,0,0])  # initially not cached
        f.assertData (['','','c1'], mtime=t.head)

        # >>> (@at2) commit again -> we can see both latest and snapshotted states
        # NOTE blocks e(4) and f(5) will be accessed only in the end
        at2 = t.commit(zf, {2:'c2', 3:'d2', 5:'f2'})

        # f @head
>       f.assertCache([1,1,0,0,0,0])

wcfs/wcfs_test.py:1341:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

t = <wcfs.wcfs_test.tFile instance at 0x7ff61457b960>, incorev = [1, 1, 0, 0, 0, 0]

    def assertCache(t, incorev):
>       assert t.cached() == incorev
E       assert [0, 0, 0, 0, 0, 0] == [1, 1, 0, 0, 0, 0]
E         At index 0 diff: 0 != 1
E         Use -v to get the full diff

wcfs/wcfs_test.py:791: AssertionError
------------------------------------ Captured stdout call ------------------------------------

M: commit -> @at0 (03fb5dfbe3c1cd55)

M: commit -> @at1 (03fb5dfbe4936a66)
M:      f<0000000000000002>     [2]

M: commit -> @at2 (03fb5dfbe4d01166)
M:      f<0000000000000002>     [2, 3, 5]
>>> Change history by file:

f<0000000000000002>:
                                0 1 2 3 4 5 6 7
                                a b c d e f g h
        @at0 (03fb5dfbe3c1cd55)
        @at1 (03fb5dfbe4936a66)     2
        @at2 (03fb5dfbe4d01166)     2 3   5

------------------------------------ Captured stderr call ------------------------------------
I0917 12:43:53.392222  124283 wcfs.go:2752] start "/dev/shm/wcfs/0ca22ca24e4cff2d01c10aa546fe5d5ac64bce72" "file:///tmp/testdb_fs.z5ZoMH/1.fs"
I0917 12:43:53.392282  124283 wcfs.go:2758] (built with go1.21.13)
W0917 12:43:53.392404  124283 storage.go:232] zodb: FIXME: open file:///tmp/testdb_fs.z5ZoMH/1.fs: raw cache is not ready for invalidations -> NoCache forced
W0917 12:43:53.567807  124283 wcfs.go:2331] /head/bigfile: lookup "0000000000000001": bigfopen 0000000000000001 @03fb5dfbe3c1cd55: invalid argument: ZODB.Broken("persistent.Persistent") is not a ZBigFile
I0917 12:43:53.710208  124283 wcfs.go:2933] stop "/dev/shm/wcfs/0ca22ca24e4cff2d01c10aa546fe5d5ac64bce72" "file:///tmp/testdb_fs.z5ZoMH/1.fs"
------------------------------------- Captured log call --------------------------------------
WARNING  ZODB.FileStorage:FileStorage.py:412 Ignoring index for /tmp/testdb_fs.z5ZoMH/1.fs
_________________________________ test_wcfs_watch_vs_access __________________________________

    @func
    def test_wcfs_watch_vs_access():
        t = tDB(); zf = t.zfile; at0=t.at0
        defer(t.close)

        f = t.open(zf)
        at1 = t.commit(zf, {2:'c1'})
        at2 = t.commit(zf, {2:'c2', 3:'d2', 5:'f2'})
        at3 = t.commit(zf, {0:'a3', 2:'c3', 5:'f3'})

        f.assertData(['a3','','c3','d2','x','x'])
        f.assertCache([1,1,1,1,0,0])

        # watched + commit -> read -> receive pin messages.
        # read vs pin ordering is checked by assertBlk.
        #
        # f(5) is kept not accessed to check later how wcfs.go handles δFtail
        # rebuild after it sees not yet accessed ZBlk that has change history.
        wl3  = t.openwatch();  w3 = wl3.watch(zf, at3);  assert at3 == t.head
        assert w3.at     == at3
        assert w3.pinned == {}

        wl3_ = t.openwatch();  w3_ = wl3_.watch(zf, at3)
        assert w3_.at     == at3
        assert w3_.pinned == {}

        wl2  = t.openwatch();  w2 = wl2.watch(zf, at2)
        assert w2.at     == at2
        assert w2.pinned == {0:at0, 2:at2}

        # w_assertPin asserts on state of .pinned for {w3,w3_,w2}
        def w_assertPin(pinw3, pinw3_, pinw2):
            assert w3.pinned   == pinw3
            assert w3_.pinned  == pinw3_
            assert w2.pinned   == pinw2

        f.assertCache([1,1,1,1,0,0])
        at4 = t.commit(zf, {1:'b4', 2:'c4', 5:'f4', 6:'g4'})
>       f.assertCache([1,0,0,1,0,0,0])

wcfs/wcfs_test.py:1702:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

t = <wcfs.wcfs_test.tFile instance at 0x7ff614512050>, incorev = [1, 0, 0, 1, 0, 0, ...]

    def assertCache(t, incorev):
>       assert t.cached() == incorev
E       assert [0, 0, 0, 0, 0, 0, ...] == [1, 0, 0, 1, 0, 0, ...]
E         At index 0 diff: 0 != 1
E         Use -v to get the full diff

wcfs/wcfs_test.py:791: AssertionError
------------------------------------ Captured stdout call ------------------------------------

M: commit -> @at0 (03fb5dfc0fd82300)

M: commit -> @at1 (03fb5dfc10b92ecc)
M:      f<0000000000000049>     [2]

M: commit -> @at2 (03fb5dfc10cee9dd)
M:      f<0000000000000049>     [2, 3, 5]

M: commit -> @at3 (03fb5dfc1100c999)
M:      f<0000000000000049>     [0, 2, 5]

C: setup watch f<0000000000000049> @at3 (03fb5dfc1100c999)

C: setup watch f<0000000000000049> @at3 (03fb5dfc1100c999)

C: setup watch f<0000000000000049> @at2 (03fb5dfc10cee9dd)

M: commit -> @at4 (03fb5dfc120ed611)
M:      f<0000000000000049>     [1, 2, 5, 6]
>>> Change history by file:

f<0000000000000049>:
                                0 1 2 3 4 5 6 7
                                a b c d e f g h
        @at0 (03fb5dfc0fd82300)
        @at1 (03fb5dfc10b92ecc)     2
        @at2 (03fb5dfc10cee9dd)     2 3   5
        @at3 (03fb5dfc1100c999) 0   2     5
        @at4 (03fb5dfc120ed611)   1 2     5 6

------------------------------------ Captured stderr call ------------------------------------
I0917 12:44:03.733037  125217 wcfs.go:2752] start "/dev/shm/wcfs/0ca22ca24e4cff2d01c10aa546fe5d5ac64bce72" "file:///tmp/testdb_fs.z5ZoMH/1.fs"
I0917 12:44:03.733126  125217 wcfs.go:2758] (built with go1.21.13)
W0917 12:44:03.733418  125217 storage.go:232] zodb: FIXME: open file:///tmp/testdb_fs.z5ZoMH/1.fs: raw cache is not ready for invalidations -> NoCache forced
I0917 12:44:04.475273  125217 wcfs.go:2933] stop "/dev/shm/wcfs/0ca22ca24e4cff2d01c10aa546fe5d5ac64bce72" "file:///tmp/testdb_fs.z5ZoMH/1.fs"
============================ 2 failed, 42 passed in 55.81 seconds ============================
I0917 12:44:17.882140  125540 wcfs.go:2933] stop "/dev/shm/wcfs/c4d833a0bdea4c51decf5425b8ad2cc4d017280f" "file:///tmp/testdb_fs.bvHBy9/1.fs"
make: *** [Makefile:174: test.wcfs] Error 1

/reviewed-by @kirr
/reviewed-on nexedi/wendelin.core!30

The WCFS documentation specifies [1]:

- - - 8> - - - 8> - - -

If a client, on purpose or due to a bug or being stopped, is slow to respond
with ack to file invalidation notification, it creates a problem because the
server will become blocked waiting for pin acknowledgments, and thus all
other clients, that try to work with the same file, will get stuck.

[...]

Lacking OS primitives to change address space of another process and not
being able to work it around with ptrace in userspace, wcfs takes approach
to kill a slow client on 30 seconds timeout by default.

- - - <8 - - - <8 - - -

But before, this protection wasn't implemented yet: one
faulty client could therefore freeze the whole system. With this work
this protection is implemented now: faulty clients are killed after the
timeout or any other misbehaviour in their pin handlers.

Working on this topic also resulted in several fixes and improvements
around isolation protocol implementation on the server side.

See individual patches for details.

[1] https://lab.nexedi.com/nexedi/wendelin.core/blob/38dde766/wcfs/wcfs.go#L186-208Co-authored-by: Levin Zimmermann <levin.zimmermann@nexedi.com>

/reviewed-on nexedi/wendelin.core!18

I would only suggest one very tiny change. In go.mod we have:

    module lab.nexedi.com/nexedi/wendelin.core/wcfs

    go 1.14

I think this needs to be updated to go 1.19 due to atomic.Int64.

And maybe we just need general go mod tidy update.

/reviewed-by @kirr
/reviewed-on nexedi/wendelin.core!18

The WCFS documentation specifies [1]:

- - - 8> - - - 8> - - -

If a client, on purpose or due to a bug or being stopped, is slow to respond
with ack to file invalidation notification, it creates a problem because the
server will become blocked waiting for pin acknowledgments, and thus all
other clients, that try to work with the same file, will get stuck.

[...]

Lacking OS primitives to change address space of another process and not
being able to work it around with ptrace in userspace, wcfs takes approach
to kill a slow client on 30 seconds timeout by default.

- - - <8 - - - <8 - - -

But before this patch, this protection wasn't implemented yet: one
faulty client could therefore freeze the whole system. With this patch
this protection is implemented now: faulty clients are killed after the
timeout or any other misbehaviour in their pin handlers.

[1] https://lab.nexedi.com/nexedi/wendelin.core/blob/38dde766/wcfs/wcfs.go#L186-208

Preliminary history:

    levin.zimmermann/wendelin.core@24904e82
    levin.zimmermann/wendelin.core@b02dcadcCo-authored-by: Levin Zimmermann <levin.zimmermann@nexedi.com>

/discussed-on nexedi/wendelin.core!18

If a pin misbehaves or there is IO error or anything else, we want to
stop all communication on the watchlink, cancel on in-flight pin
handlers, and (TODO) kill the client with SIGBUS.

This patch organizes WatchLink shutdown on any pin error.
This functionality is indirectly tested by test_Wcfs_watch_robust and
will be also indirectly tested by faultyprotection tests.

It would be good to have dedicated tests probably, but that is,
hopefully, TODO.

/reviewed-by @levin.zimmermann
/reviewed-on nexedi/wendelin.core!18

Pinning is critical operation whose failure will soon lead to client
being killed with SIGBUS. WCFS correctness also depend fundamentally on
pin operation, if started, to be handled by the client.

-> rework the READ handler not to cancel pin if a READ interrupt comes
   in from the OS client.

Do this via organizing WatchLink.serveCtx and running pins under this
context instead of under READ context. Later we will adjust pins to also
cancel this context on any error.

Test is, hopefully, TODO.

/reviewed-by @levin.zimmermann
/reviewed-on nexedi/wendelin.core!18

When serve is completing and going to exit, it sends an error message to
the client without any timeout. So if the client is not reading from the
channel, wcfs will get stuck waiting for the message to be consumed.

-> Fix that by trying to send that last error only during 1 second and
   ignoring errors if any

Test is, hopefully, TODO.

/reviewed-by @levin.zimmermann
/reviewed-on nexedi/wendelin.core!18

Bring in more structure:

- final watchlink cleanup is done in its own block
- cancelling spawned handlers is done in another block
- add more comments explaining things

/reviewed-by @levin.zimmermann
/reviewed-on nexedi/wendelin.core!18

Previously we were using .sk.CloseRead() to interrupt sk.Read(), but
that is not necessary since .sk, relying on xio.Pipe, implements
xio.Reader natively with full support for cancellation.

The original code to cancel via CloseRead comes from mid 2019 and predates

go123@7ad867a3
go123@0e368363
go123@0bdac628
go123@9db4dfac
go123@d2dc6c09

And in b17aeb8c and
6f0cdaff (wcfs: Provide isolation to clients), it seems, I missed to
update WatchLink.serve code to that.

Do that now because it simplifies code flow organization a bit.

/reviewed-by @levin.zimmermann
/reviewed-on nexedi/wendelin.core!18

So far we were testing only against faulty client that reads pin
notification ok, but does not reply to the notification. But there could
be more problems:

1) a client does not read pin notification at all
2) a client closes watchlink abruptly after reading pin notification
3) a client replies to pin notification but the reply is not "ack"

The first problem, if not handled leads to whole set of clients to
become stuck on reading the same block as the faulty client. The other
problems also indicate breakage of the isolation protocol from the client
side and that wcfs can no longer be sure that it provides good
uncorrupted data to the client.

In the first case, similarly to "no reply" situation we need to kill the
client to make progress while maintaining safety as well. In the cases 2
and 3 we cannot maintain safety if the faulty client remains in the set
of live and served clients, so it is also logical to send SIGBUS/SIGKILL
to it.

Killing a client with SIGBUS is similar to how OS kernel sends SIGBUS when
a memory-mapped file is accessed and loading file data results in EIO. It is
also similar to wendelin.core 1 where SIGBUS is raised if loading file block
results in an error.

Extend tests to cover all explained scenarios.

/reviewed-by @levin.zimmermann
/reviewed-on nexedi/wendelin.core!18

wcfs: tests: Add test to exercies faulty client that does not reply to pin triggered by readPinWatchers

Levin writes:

    This patch extends the test scope of 'test_wcfs_pintimeout_kill'. Before
    this patch, the test only ensured that a client that does not
    respond to pin requests during the initial watch request [1] is
    killed. Now it also tests that a faulty client is killed when a block
    is invalidated. Since there are no other situations where the WCFS
    server sends pin requests to a client, the tests now cover all situations
    where a faulty client might not respond. This patch therefore aims to
    increase the security that WCFS is not blocked by a faulty client.

    [1] See nexedi/wendelin.core!18

Preliminary history:

    levin.zimmermann/wendelin.core@9d42efffCo-authored-by: Levin Zimmermann <levin.zimmermann@nexedi.com>

/discussed-on nexedi/wendelin.core!18

We will need to use this utilitin from several places in the next patch.

/reviewed-by @levin.zimmermann
/reviewed-on nexedi/wendelin.core!18

Currently assertBlk uses default timeout() to wait for READ operation to
complete. That works well everywhere except that in faulty
protection tests wcfs server will first need to wait for its own
pintimeout time to kill the faulty client and only then	return read
result to all non-faulty clients.

This way corresponding test, when one client fails to handle pin
notification well triggered due to READ operations, will need to use
adjusted longer timeout for the good client when doing assertBlk.

Adjust assertBlk to allow specifying custom timeout as preparatory step
for that.

/reviewed-by @levin.zimmermann
/reviewed-on nexedi/wendelin.core!18

And make sure that that good client can setup its watch ok even
through there simultaneously is a faulty client that should get killed.

/reviewed-by @levin.zimmermann
/reviewed-on nexedi/wendelin.core!18

If we don't the whole testing process will become killed when wcfs
becomes taught to kill clients that do not handle pin notifications
well.

Use multiprocessing to do so and to be able to interoperate with spawned
test process by sending/receiving objects to/from it.

Preliminary history:

    levin.zimmermann/wendelin.core@aef0f0e1Co-authored-by: Levin Zimmermann <levin.zimmermann@nexedi.com>

/discussed-on nexedi/wendelin.core!18

If wcfs kills client that did not respond to pin notification in
pintimeout time, we need to wait strictly _more_ than that time to detect
whether client was killed or not. And in practice, due to noise in
operating system load and other factors, that waiting time should be
significantly greater to detect lack of expected event. However we were
waiting for exactly 1·pintimeout time and were claiming that there was
no pinkill event right after that.

-> Wait for 2·pintimeout instead of 1·pintimeout to make pinkill detection robust.

/reviewed-by @levin.zimmermann
/reviewed-on nexedi/wendelin.core!18

The default "pin timeout" is 30s and we are going to add many tests that
exercise pinkilling functionality soon. If every such test takes
2·pintimeout time = 60s, it will result in significant time increase
needed to run WCFS tests. Avoid that by adjusting pin timeout to
one order of magnitude smaller pintimeout=3s during faulty protection
tests.

/reviewed-by @levin.zimmermann
/reviewed-on nexedi/wendelin.core!18

This testing helper limits whole test time to detect FUSE-related
deadlocks via aborting FUSE connection on timeout. It is working good so
far. But soon we will need pinkill-related tests, where timeout will
need to be detected independently of FUSE connection. Expose tWCFS.ctx
for tests to be able to use this context and do things limited in time.
Adjust FUSE aborting to correlate exactly with this context
cancellation.

/reviewed-by @levin.zimmermann
/reviewed-on nexedi/wendelin.core!18

We are going to add more tests on this topic + supporting infrastructure.
It makes sense to move everything related to dedicated test file first
as a preparatory step because wcfs_test.py feels already overloaded.

Plain code movement.

/reviewed-by @levin.zimmermann
/reviewed-on nexedi/wendelin.core!18

WCFS allows issuing simultaneous watch requests and when two watch
requests are simultaneously issued for the same file there was a race in
their handling: the code was relying on w.atMu.W to protect setupWatch
from concurrent readPinWatcher, and also, seemingly from another
setupWatch running on the same file.

But there is a bug about that: lacking atomic primitive to downgrade
RWMutex from wlock to rlock, atMu.W was first fully unlocked and then
rlocked again. The code prepare wrt readPinWatcher to start running in
that unlock->rlock time window, but it was not prepared wrt another
setupWatch starting to run on the same file in that pause time.

-> Fix that via using dedicated Watch.setupMu lock that protects
   setupWatch from setupWatch.

Test is, hopefully, TODO.

My mistake from 6f0cdaff (wcfs: Provide isolation to clients)

/reviewed-by @levin.zimmermann
/reviewed-on nexedi/wendelin.core!18

Inside readPinWatchers:

    https://lab.nexedi.com/nexedi/wendelin.core/-/blob/wendelin.core-2.0.alpha3-26-g79e6f7b9/wcfs/wcfs.go#L1536-1591

if δFtail.BlkRevAt would return an error, then f.watchMu was not
RUnlocked back, and wg.Wait was not called at all.

-> Fix that by scheduling unlock and wg wait right after f.watchMu is
   rlocked and workgroup is created.

Test is, hopefully, TODO.

My mistake from 6f0cdaff (wcfs: Provide isolation to clients)

/reviewed-by @levin.zimmermann
/reviewed-on nexedi/wendelin.core!18

The code was already behaving like that but there was XXX to do it. Add
test to verify it is actually done.

Opened WatchLink handle is released after RELEASE because
read in WatchLink.serve, after RELEASE, returns EOF and then the code
inside WCFS does all necessary WatchLink-related cleanup:

https://lab.nexedi.com/nexedi/wendelin.core/-/blob/wendelin.core-2.0.alpha3-26-g79e6f7b9/wcfs/wcfs.go#L1828-1872

/reviewed-by @levin.zimmermann
/reviewed-on nexedi/wendelin.core!18

This was marked as TODO in server code and not implemented.
Without this cleanup zheadSockTab was growing indefinitely after every
open/close and leaking memory.

-> Fix it via registering RELEASE handler to FUSE and removing
corresponding zheadSockTab entry from there.

/reviewed-by @levin.zimmermann
/reviewed-on nexedi/wendelin.core!18

Report there number of inside-WCFS instances, e.g. number of tracked
BigFiles, WatchLinks etc, and also number of counted events, for example
how many times a pin event happened.

Soon we will need this statistics to implement tests e.g. for pinkilling
and other functionalities, and it might be also useful to have in general.

/reviewed-by @levin.zimmermann
/reviewed-on nexedi/wendelin.core!18

ZWatcher says it does not need to lock wlinkMu because it is already
holding zheadMu and setupWatch runs with zheadMu locked. That is indeed
true, but the mistake here is that it i not only setupWatch that makes
access to wlinkTab. For example WatchNode.Open registers new entries
there only under wlinkMu:

https://lab.nexedi.com/nexedi/wendelin.core/-/blob/wendelin.core-2.0.alpha3-26-g79e6f7b9/wcfs/wcfs.go#L1819-1822

-> Fix it by always using wlinkMu when accessing wlinkTab.

My mistake from 6f0cdaff (wcfs: Provide isolation to clients)

Test is, hopefully, TODO.

/reviewed-by @levin.zimmermann
/reviewed-on nexedi/wendelin.core!18

Previously we were protecting access to zheadSockTab with zheadMu
because this table was accessed from only two places: when opening
.wcfs/zhead and in zwatcher. Soon we are going to add another place that
will access this table and still using big zheadMu seem less and less
logical.

-> Switch to using dedicated lock to protect table of .wcfs/zhead opens
   as preparatory step for that.

/reviewed-by @levin.zimmermann
/reviewed-on nexedi/wendelin.core!18

Currently zwatcher failure leads to wcfs starting to provide stale data
instead of uptodate data. Fix that by detecting zwatcher failures and
explicitly switching the filesystem to a mode where any access to
anything returns "input/output error".

Zwatcher can fail on e.g. failure to retrieve transactions from ZODB
storage or any other failure. With this patch we make sure this does not
go unnoticed.

/reviewed-by @levin.zimmermann
/reviewed-on nexedi/wendelin.core!18

go-fuse added functionality to handle Init.MaxPages in
https://github.com/hanwen/go-fuse/commit/265a39266958.

/reviewed-by @levin.zimmermann
/reviewed-on nexedi/wendelin.core!18

We need to drop client-specific options so that NEO URI that only differ
due to client options while actually pointing to the same NEO server
are equal after normalization.

--------
kirr: See nexedi/neoppod!18 for
the discussion on this subject.

/reviewed-by @kirr
/reviewed-on nexedi/wendelin.core!28

NEO/go and NEO/py URI format diverged over time:

- neo@8c974485

However with nexedi/neoppod!21 a
common solution was found. With neo!7 NEO/go and NEO/py
URI formats are in sync again. We therefore now need to update
'wendelin.core' to support the finally agreed on URI format.

/reviewed-by @kirr
/reviewed-on nexedi/wendelin.core!28

With neo@95572d6a we synchronized
NEO/go URI format with NEO/py URI format. We need this new
NEO/go version to apply this synchronization to 'wendelin.core'
ZODB tools (what we'll do in the next patches).

/reviewed-by @kirr
/reviewed-on nexedi/wendelin.core!28

This semantically reverts 99f262dd (bigfile/zodb: Make auto format the
default) for wendelin.core-1 mode because in non-WCFS mode there are
known problems with data corruption on BTree topology changes(*) and
auto mode actually does change those topologies with first setting
ZBigFile[blk] -> ZBlk1 and then updating the same block to point to
ZBlk0 object.

Avoid pressuring those problems and use auto as default only in WCFS
mode that should handle invalidations with all those BTree topology
changes well.

The patch is based on suggestion by Levin Zimmermann: nexedi/wendelin.core!20 (comment 212405)

We have to move _default_use_wcfs because now it is invoked at module
import time and needs to be already defined at the time of the call.

(*) see nexedi/wendelin.core@8c32c9f6 for details.

/reviewed-by @levin.zimmermann
/reviewed-on nexedi/wendelin.core!29

Strings cannot be directly hashed without encoding them first, or
an error will be raised:

```python
______________________________ test_zsync_resync _______________________________

    @func
    def test_zsync_resync():
        zstor = testdb.getZODBStorage()
        defer(zstor.close)

>       db, zconn, wconn = _zsync_setup(zstor)

wcfs/client/_wczsync_test.py:112:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
../../venvs/wendelin.core/lib/python3.9/site-packages/decorator.py:232: in fun
    return caller(func, *(extras + args), **kw)
../pygolang/golang/__init__.py:125: in _
    return f(*argv, **kw)
wcfs/client/_wczsync_test.py:53: in _zsync_setup
    wc = wcfs.join(zurl)
wcfs/__init__.py:201: in join
    mntpt = _mntpt_4zurl(zurl)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

zurl = 'file:///srv/slapgrid/slappart66/tmp/testdb_fs.xstpbg49/1.fs'

    def _mntpt_4zurl(zurl):
        # normalize zurl so that even if we have e.g. two neos:// urls coming
        # with different paths to ssl keys, or with different order in the list of
        # masters, we still have them associated with the same wcfs mountpoint.
        zurl = zurl_normalize_main(zurl)

        m = hashlib.sha1()
>       m.update(zurl)
E       TypeError: Strings must be encoded before hashing
```

We fix this error by encoding the string as UTF8 before hashing it.

--------
kirr:

Use b instead of doing

    if isinstance(zurl, six.text_type):
      zurl = zurl.encode("utf-8")

wcfs already takes this approach of using b in other places - for
example in tDB.change:

    # change schedules zf to be changed according to changeDelta at commit.
    #
    # changeDelta: {} blk -> data.
    # data can be both bytes and unicode.              <-- NOTE
    def change(t, zf, changeDelta):
        assert isinstance(zf, ZBigFile)
        zfDelta = t._changed.setdefault(zf, {})
        for blk, data in six.iteritems(changeDelta):
            data = b(data)                             <-- NOTE
            ...

/reviewed-by @kirr
/reviewed-on nexedi/wendelin.core!27