Change-Id: I87db804ce6df8b21f4cfba8557395b0067a177da

Add dynamic_example_test.go to Readdir/Lookup.

Change-Id: If7cd2a29166b9952af0ca362cba89df1d98b634b

Change-Id: I36aea1eee9937fab4d33657ca4514866750ac55a

Change-Id: I1fe9bf5c77a332002b3b0a15b75853102549b511

Change-Id: Iffe9bf5c77a332002b3b0a15b75853102549b511

Change-Id: Iefe9bf5c77a332002b3b0a15b75853102549b511

In cooperation with GerritHub, a repo-specific deploy key was setup,
which avoids granting blanket r/w access to the Gerrithub server.

This reverts commit 09a2813e.

Change-Id: I09a2813e

This apparently happens in NFS mounts of FUSE file systems when
combined with lots of FS activity. Maybe some part of the client is
caching readdir results in the wrong way?

In any event, returning OK (signifying EOF on the dirstream) is
harmless.

Change-Id: Ib09d77eae0f1af8bce46b07f386fdda20b2ccb95

This complements commit "fuse: allow filesystems to disable
CAP_AUTO_INVAL_DATA" and teaches go-fuse to request explicit data cache
invalidation mode if fuse.MountOptions.ExplicitDataCacheControl is set.

See https://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse.git/commit/?id=ad2ba64dd489
and https://lwn.net/ml/linux-fsdevel/20190315212556.9315-1-kirr%40nexedi.com/ for rationale and details.

This test was flaky even before ce2558b4 (fuse/test: disable
TestFopenKeepCache) because after file change it was reporting to kernel
both different size (before=6, after=5) and potentially different mtime.
The kernel is known to invalidate file's data cache on size change, and
also to invalidate file's data cache on mtime change if
CAP_AUTO_INVAL_DATA was negotiated at FUSE handshake. Until recently
go-fuse was always using CAP_AUTO_INVAL_DATA mode.

The test was somehow passing on kernels < Linux 4.20 due to the fact
that the write was coming soon after previous lookup/getattr and thus
likely before attributes timeout. The kernel was still seeing old mtime
and size and was not invalidating file cache. If I add just "sleep
enough time for file attributes to expire..." + followup stat from the
patch, the test fails reliably even on older kernels where it used to be
passing:

	=== RUN   TestFopenKeepCache
	17:44:33.397329 rx 1: INIT i0 {7.27 Ra 0x20000 SPLICE_READ,HANDLE_KILLPRIV,IOCTL_DIR,READDIRPLUS,PARALLEL_DIROPS,ABORT_ERROR,POSIX_LOCKS,DONT_MASK,SPLICE_WRITE,SPLICE_MOVE,ASYNC_READ,FLOCK_LOCKS,WRITEBACK_CACHE,POSIX
	17:44:33.397413 tx 1:     OK, {7.23 Ra 0x20000 ASYNC_READ,NO_OPEN_SUPPORT,BIG_WRITES,AUTO_INVAL_DATA,READDIRPLUS,PARALLEL_DIROPS 0/0 Wr 0x10000 Tg 0x0}
	17:44:33.398589 rx 2: LOOKUP i1 [".go-fuse-epoll-hack"] 20b
	17:44:33.398644 tx 2:     2=no such file or directory, {i0 g0 tE=0s tA=0s {M00 SZ=0 L=0 0:0 B0*0 i0:0 A 0.000000 M 0.000000 C 0.000000}}
	17:44:33.398686 rx 3: CREATE i1 {0100100 [WRONLY,TRUNC,CREAT,0x8000] (022)} [".go-fuse-epoll-hack"] 20b
	17:44:33.398710 tx 3:     OK, {i18446744073709551615 g0 {M0100644 SZ=0 L=1 0:0 B0*0 i0:18446744073709551615 A 0.000000 M 0.000000 C 0.000000} &{18446744073709551615 0 0}}
	17:44:33.398745 rx 4: POLL i18446744073709551615
	17:44:33.398753 tx 4:     38=function not implemented
	17:44:33.399446 rx 5: FLUSH i18446744073709551615 {Fh 18446744073709551615}
	17:44:33.399466 tx 5:     5=input/output error
	17:44:33.399540 rx 6: RELEASE i18446744073709551615 {Fh 18446744073709551615 WRONLY,0x8000  L0}
	17:44:33.399548 tx 6:     5=input/output error
	17:44:33.399567 rx 7: LOOKUP i1 ["file.txt"] 9b
	17:44:33.399648 tx 7:     OK, {i3 g2 tE=1s tA=0.01s {M0100644 SZ=6 L=1 1000:1000 B8*4096 i0:841351 A 1552833873.399069 M 1552833873.399069 C 1552833873.399069}}
	17:44:33.399936 rx 8: OPEN i3 {O_RDONLY,0x8000}
	17:44:33.399976 tx 8:     OK, {Fh 2 CACHE}
	17:44:33.400045 rx 9: READ i3 {Fh 2 [0 +4096)  L 0 NONBLOCK,0x8000}
	17:44:33.400065 tx 9:     OK,  4096b data (fd data)
	17:44:33.400185 rx 10: GETATTR i3 {Fh 2}
	17:44:33.400261 tx 10:     OK, {tA=0.01s {M0100644 SZ=6 L=1 1000:1000 B8*4096 i0:841351 A 1552833873.399069 M 1552833873.399069 C 1552833873.399069}}
	17:44:33.400296 rx 11: FLUSH i3 {Fh 2}
	17:44:33.400305 tx 11:     OK
	17:44:33.400324 rx 12: RELEASE i3 {Fh 2 NONBLOCK,0x8000  L0}
	17:44:33.400334 tx 12:     OK

		sleep here

	17:44:33.500843 rx 13: GETATTR i3 {Fh 0}
	17:44:33.500939 tx 13:     OK, {tA=0.01s {M0100644 SZ=5 L=1 1000:1000 B8*4096 i0:841351 A 1552833873.399069 M 1552833873.399069 C 1552833873.399069}}
	17:44:33.501118 rx 14: OPEN i3 {O_RDONLY,0x8000}
	17:44:33.501195 tx 14:     OK, {Fh 2 CACHE}
	17:44:33.501468 rx 15: READ i3 {Fh 2 [0 +4096)  L 0 NONBLOCK,0x8000}
	17:44:33.501500 tx 15:     OK,  4096b data (fd data)
	17:44:33.501582 rx 16: GETATTR i3 {Fh 2}
	17:44:33.501625 tx 16:     OK, {tA=0.01s {M0100644 SZ=5 L=1 1000:1000 B8*4096 i0:841351 A 1552833873.499071 M 1552833873.399069 C 1552833873.399069}}
	17:44:33.502176 rx 17: FLUSH i3 {Fh 2}
	17:44:33.502210 tx 17:     OK
	17:44:33.502268 rx 18: RELEASE i3 {Fh 2 NONBLOCK,0x8000  L0}
	17:44:33.502296 tx 18:     OK
	17:44:33.547469 received ENODEV (unmount request), thread exiting
	17:44:33.547471 received ENODEV (unmount request), thread exiting
	17:44:33.547469 received ENODEV (unmount request), thread exiting
	--- FAIL: TestFopenKeepCache (0.15s)
	    cache_test.go:147: ReadFile: got "after", want cached "before"

In other words the test was racy and was passing only due to likely
conditions to win a race in particular environment. Here is example debug trace
when that particular conditions are met:

	17:52:00.119419 rx 7: LOOKUP i1 ["file.txt"] 9b
	17:52:00.119818 tx 7:     OK, {i3 g2 tE=1s tA=0.01s {M0100644 SZ=6 L=1 1000:1000 B8*4096 i0:853832 A 1552834320.116131 M 1552834320.116131 C 1552834320.116131}}
	17:52:00.122865 rx 8: OPEN i3 {O_RDONLY,0x8000}
	17:52:00.122889 tx 8:     OK, {Fh 2 CACHE}
	17:52:00.122933 rx 9: READ i3 {Fh 2 [0 +4096)  L 0 NONBLOCK,0x8000}
	17:52:00.122957 tx 9:     OK,  4096b data (fd data)
	17:52:00.123014 rx 10: GETATTR i3 {Fh 2}
	17:52:00.123031 tx 10:     OK, {tA=0.01s {M0100644 SZ=6 L=1 1000:1000 B8*4096 i0:853832 A 1552834320.116131 M 1552834320.116131 C 1552834320.116131}}
	17:52:00.123050 rx 11: FLUSH i3 {Fh 2}
	17:52:00.123056 tx 11:     OK
	17:52:00.123071 rx 12: RELEASE i3 {Fh 2 NONBLOCK,0x8000  L0}
	17:52:00.123082 tx 12:     OK

	17:52:00.123105 rx 13: OPEN i3 {O_RDONLY,0x8000} 		<-- NOTE: OPEN, but no GETATTR around
	17:52:00.123124 tx 13:     OK, {Fh 2 CACHE}
	17:52:00.123146 rx 14: FLUSH i3 {Fh 2}
	17:52:00.123152 tx 14:     OK
	17:52:00.123164 rx 15: RELEASE i3 {Fh 2 NONBLOCK,0x8000  L0}
	17:52:00.123183 tx 0:     NOTIFY_INVAL_ENTRY, {parent i1 sz 8} "file.txt"
	17:52:00.123186 tx 15:     OK

However starting from Linux 4.20 the kernel started to always issue
GETATTR request around second OPEN, for example:

	18:34:22.323238 rx 26: LOOKUP i1 ["file.txt"] 9b
	18:34:22.323309 tx 26:     OK, {i3 g2 tE=1s tA=1s {M0100644 SZ=6 L=1 1000:1000 B8*4096 i0:1531145 A 1550252062.321237 M 1550252062.321237 C 1550252062.321237}}
	18:34:22.323339 rx 28: OPEN i3 {O_RDONLY,0x8000}
	18:34:22.323384 tx 28:     OK, {Fh 2 CACHE}
	18:34:22.323441 rx 30: READ i3 {Fh 2 [0 +4096)  L 0 NONBLOCK,0x8000}
	18:34:22.323477 tx 30:     OK,  4096b data (fd data)
	18:34:22.323534 rx 32: FLUSH i3 {Fh 2}
	18:34:22.323546 tx 32:     OK
	18:34:22.323577 rx 34: RELEASE i3 {Fh 2 NONBLOCK,0x8000  L0}
	18:34:22.323594 tx 34:     OK
	18:34:22.323611 rx 36: OPEN i3 {O_RDONLY,0x8000}		<-- NOTE: OPEN with GETATTR around
	18:34:22.323636 tx 36:     OK, {Fh 2 CACHE}
	18:34:22.323661 rx 38: GETATTR i3 {Fh 0}
	18:34:22.323684 tx 38:     OK, {tA=1s {M0100644 SZ=5 L=1 1000:1000 B8*4096 i0:1531145 A 1550252062.322237 M 1550252062.322237 C 1550252062.322237}}
	18:34:22.323729 rx 40: READ i3 {Fh 2 [0 +4096)  L 0 NONBLOCK,0x8000}
	18:34:22.323740 tx 40:     OK,  4096b data (fd data)

which almost always triggers conditions to invalidate data cache on kernel side
(different size and different mtime).

The kernel is not doing anything wrong here - it is allowed to issue
GETATTR request at any time. It is thus only a kernel behaviour change,
still being valid from FUSE protocol point of view, not a kernel
regression.

-> Fix the test

- by disabling CAP_AUTO_INVAL_DATA via ExplicitDataCacheControl. This
  should stop kernel from dropping data cache on mtime change;
- by using the same size for before and after states. This avoid hitting
  cache being dropped when kernel sees file size being changed.

Make the test more picky trying to hit the pain points:

- make sure that mtime of file.txt at before and after states are
  different. Without added sleep the panic on mtime δ == 0 is triggered
  reliably on my notebook.
- issue explicit stat before second open to force kernel to
  relookup/regetattr the file and reread the attributes.

Hopefully finally fixes https://github.com/hanwen/go-fuse/issues/168.

We have many calls to ioutil.WriteFile and ioutil.ReadFile + checking
for error. Move those calls into utility functions which call t.Fatal if
they see any error. No need to use additional error prefix as both
ioutil.WriteFile and ReadFile produce os.PathError which always has
opertion and path on which it was performed.

Add nodefs.Mount - utility to mount root over mountpoint with given
options. We already had nodefs.MountRoot, but that was taking only
nodefs.Options and there was no way to pass fuse.MountOptions in. The
new utility accepts both fuse.MountOptions and nodefs.Options, each
covering their level.

This should be generally useful(*), as well as it will be used in a next
patch in TestFopenKeepCache where fuse.MountOptions.PreciseDataCacheControl
will need to be used.

(*) see e.g. https://lab.nexedi.com/kirr/wendelin.core/blob/8f497094/wcfs/misc.go#L258
as example that users unroll their Mount versions to be able to pass in
fuse.MountOptions.

CAP_AUTO_INVAL_DATA is capability of kernel, but from the point of view
of a filesystem it is not a capability, but a behaviour request: if set,
it requests to kernel - filesystem client - to perform data cache
invalidations based on heuristics. Current heuristic is to drop data
cache for a file if kernel sees file's mtime being changed:

	https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/fs/fuse/inode.c?id=v5.0-0-g1c163f4c7b3f#n238
	https://git.kernel.org/linus/eed2179efe

However this could be unwanted behaviour if filesystem is careful to
explicitly invalidate local file cache: despite filesystem attempts to
preciously keep data cache, the whole cache of the file is unnecessarily
dropped.

-> To fix add a new mount options for filesystems to indicate they are
careful with respect to data cache invalidations and thus should be
fully responsible for invalidating data cache. Teach go-fuse to not send
CAP_AUTO_INVAL_DATA in this mode to kernel on FUSE handshake.

Note, as of upcoming Linux 5.1 (estimated to be released mid 2019), FUSE
client in kernel still automatically and unconditionally drops whole
data cache of a file if its sees size change. Kernel and go-fuse patches
to fix that are here:

	https://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse.git/commit/?id=ad2ba64dd489
	https://github.com/hanwen/go-fuse/pull/273

The kernel patch is likely to enter mainline kernel when 5.2 merge
window opens. We'll remove XXX in a follow-up go-fuse patch that adds
support for CAP_EXPLICIT_INVAL_DATA.

FOPEN_STREAM, together with FOPEN_NONSEEKABLE must be used on
stream-like file handles that provide both read and write to avoid
hitting deadlock in the kernel.

Please see the following kernel patch for details on how the deadlock
can happen:

	git.kernel.org/linus/10dce8af3422

Adding FOPEN_STREAM to kernel FUSE is in fuse.git#for-next now and is likely
to enter mainline kernel when 5.2 merge window opens way or another:

	https://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse.git/commit/?id=bbd84f33652
	https://lore.kernel.org/linux-fsdevel/CAHk-=whQQdoQsgEx1vO7OkfPDcV5hurPnMRLgzfXAPN63n5Sbg@mail.gmail.com/
	https://lore.kernel.org/linux-fsdevel/CAHk-=wjEOyba5As1PEMk6RitNVOJH9oJ_Jbg4y=5B0fcX1iKGw@mail.gmail.com/
	https://lore.kernel.org/linux-fsdevel/CAHk-=wgh234SyBG810=vB360PCzVkAhQRqGg8aFdATZd+daCFw@mail.gmail.com/
	https://lore.kernel.org/linux-fsdevel/20190424183012.GB3798@deco.navytux.spb.ru/

Here is example for FOPEN_STREAM usage:

	https://lab.nexedi.com/kirr/wendelin.core/blob/7783ecf4/wcfs/misc.go#L327-335
	https://lab.nexedi.com/kirr/wendelin.core/blob/7783ecf4/wcfs/misc.go#L276-428

When kernel sends WRITE request it sends with it file handle, offset,
size etc. We were not printing all this. Compare e.g. debug output
sample for TestUtimesNano before and after the patch.

before:

	rx 8: CREATE i1 {0100600 [CREAT,TRUNC,WRONLY,0x8000] (00)} ["hello.txt"] 10b
	tx 8:     OK, {i3 g2 {M0100600 SZ=0 L=1 1000:1000 B0*4096 i0:733462 A 1556038355.426630 M 1556038355.426630 C 1556038355.426630} &{2 0 0}}
	rx 9: GETXATTR i3 {sz 0} ["security.capability"] 20b
	tx 9:     61=no data available
	rx 10: WRITE i3  3b							<-- NOTE
	tx 10:     OK

after:

	rx 8: CREATE i1 {0100600 [WRONLY,CREAT,TRUNC,0x8000] (00)} ["hello.txt"] 10b
	tx 8:     OK, {i3 g2 {M0100600 SZ=0 L=1 1000:1000 B0*4096 i0:736300 A 1556038379.359197 M 1556038379.359197 C 1556038379.359197} &{2 0 0}}
	rx 9: GETXATTR i3 {sz 0} ["security.capability"] 20b
	tx 9:     61=no data available
	rx 10: WRITE i3 {Fh 2 [0 +3)  L 0 WRONLY,NONBLOCK,0x8000}  3b		<-- NOTE
	tx 10:     OK

The new naming makes clear that this is the One True API for Go-FUSE

There is a hang that appears when enabling CAP_PARALLEL_DIROPS on Linux
4.15.0: https://github.com/hanwen/go-fuse/issues/281

The hang was originally triggered by gvfs-udisks2-volume-monitor. This
test emulates what gvfs-udisks2-volume-monitor does.

On 4.15.0 kernels, the test will get stuck, and after 120 seconds you
get a kernel backtrace like this:

[ 1813.463679] INFO: task nodefs.test:2357 blocked for more than 120 seconds.
[ 1813.463685]       Not tainted 4.15.0-45-generic #48~16.04.1-Ubuntu
[ 1813.463687] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1813.463689] nodefs.test     D    0  2357   2311 0x00000004
[ 1813.463691] Call Trace:
[ 1813.463709]  __schedule+0x3d6/0x8b0
[ 1813.463712]  schedule+0x36/0x80
[ 1813.463714]  schedule_preempt_disabled+0xe/0x10
[ 1813.463716]  __mutex_lock.isra.2+0x2ae/0x4e0
[ 1813.463720]  ? ___slab_alloc+0x223/0x4e0
[ 1813.463722]  ? _cond_resched+0x1a/0x50
[ 1813.463724]  __mutex_lock_slowpath+0x13/0x20
[ 1813.463725]  ? __mutex_lock_slowpath+0x13/0x20
[ 1813.463727]  mutex_lock+0x2f/0x40
[ 1813.463729]  fuse_lock_inode+0x2a/0x30
[ 1813.463732]  fuse_lookup+0x31/0x140
[ 1813.463735]  ? d_alloc_parallel+0xc1/0x4c0
[ 1813.463738]  fuse_atomic_open+0x6d/0xf0
[ 1813.463740]  path_openat+0xc5d/0x13f0
[ 1813.463744]  do_filp_open+0x99/0x110
[ 1813.463747]  ? __check_object_size+0xfc/0x1a0
[ 1813.463749]  ? __alloc_fd+0x46/0x170
[ 1813.463752]  do_sys_open+0x12d/0x290
[ 1813.463754]  ? do_sys_open+0x12d/0x290
[ 1813.463756]  SyS_openat+0x14/0x20
[ 1813.463759]  do_syscall_64+0x73/0x130
[ 1813.463762]  entry_SYSCALL_64_after_hwframe+0x3d/0xa2

The old code searched for the first non-null byte from the end of
the slice. This assumes that all bytes after the name are initialized
to zero, which does not hold true on Linux 4.15.

Instead, search for the first null byte from the start of the slice,
which is guaranteed by man(3) readdir.

Fixes https://github.com/hanwen/go-fuse/issues/287

This reduces the debug output from 25k lines to ~1k