Update all dependencies of WCFS to their recent versions:

- neo/go: Update to pick up support for NEO/go to handle multiple master nodes
- go123: Add support for Go1.21

The following dependencies were updated, but depend on higher go
versions than supported by wendelin.core

- glog: v1.1.0 needs go 1.19, but we still support go 1.18

The following dependencies were not updated by upstream at all:

- overflow
- og-rek
- errors
- testify

/reviewed-by @kirr
/reviewed-on nexedi/wendelin.core!22

Update all dependencies of WCFS to their recent versions:

- go-fuse: update to pick up https://github.com/hanwen/go-fuse/commit/265a3926
  and https://github.com/hanwen/go-fuse/commit/90b055af. The first patch
  potentially improves performance, while the second fixes support for
  neo:// with multiple masters.
- go123: add support for go1.20
- testify: some bugfixes (we use this package only during tests)

The following dependencies were not updated by upstream at all:

- glog
- overflow
- ogórek
- pkg/errors

.

/reviewed-by @levin.zimmermann
/reviewed-on nexedi/wendelin.core!16

If a NEO cluster has multiple master nodes, there is no agreed
on order in which the master node addresses appear in the URI.
In order to insure we always get the same normalized URI among different
clients of a NEO cluster with more than one master node, we explicitly
sort the master node address order with this patch.

/reviewed-by @kirr
/reviewed-on nexedi/wendelin.core!17

In the old source code we already filtered NEO URI by dropping
credentials, but we applied this filter to any URI, not only the NEO
one. This patch adds a mechanism to apply various filter according to
the specific storage type. Starting with this new patch,
'zurl_normalize_main' also refuses to normalize an URI with an unknown
scheme.

/reviewed-by @kirr
/reviewed-on nexedi/wendelin.core!17

After moving zurl filtering to a dedicated function, we can
now test this function for correctness. It's important that different
clients which point to the same storage always result in the same
zodburi, even if their initial user-specified zodburi slightly differs
(e.g. due to different client-side parameters or different paths of encryption).

/reviewed-by @kirr
/reviewed-on nexedi/wendelin.core!17

The WCFS mountpoint of any ZODB storage must be a unique, persistent,
repeatable hash. This means any client which uses the same storage must
always calculate the same WCFS mountpoint (independent from
client-only parameters etc.). Therefore the WCFS mountpoint calculation
must be robust for all supported ZODB storage types (at least NEO, ZEO,
filestorage).

It was recently decided [1] that in order to provide this robustness, WCFS
mountpoint calculation should filter the parsed URI in order to drop
parts, which prevents the repeatability/persistence across different
clients (e.g. parts which can differ between clients although the same
storage is accessed). In order to make this filtering implementation a
bit easier to read and the wcfs/__init__.py less dense, the first step
is to move the zurl filtering ("normalization") into lib/zodb.py
This also makes sense since this normalization can be regarded as a
general zodb tool which may be useful for other solutions which use
zodburi.

[1] nexedi/neoppod!18 (comment 184671)

/reviewed-by @kirr
/reviewed-on nexedi/wendelin.core!17

Kirill noted that nexedi/wendelin.core@fb620301 introduced a regression [1]:
'test_zstor_2zurl' sometimes passes and sometimes fails. The reason for
this is that there is no deterministic order of master nodes in
'NodeManager.getMasterList()', which is why there is no specified
order of master node addresses in a zurl [2]. We don't want to normalize
a zurl returned by 'zstor_2zurl' as we need some of the client-specific
parameters as SSL file paths, so we rather fix the test to allow any
possible order of NEO master nodes in the zurl.

[1] nexedi/wendelin.core!17 (comment 188102)
[2] https://lab.nexedi.com/nexedi/wendelin.core/blob/fb620301/lib/zodb.py#L414

/reviewed-by @kirr
/reviewed-on nexedi/wendelin.core!17

The old code raised an explicit exception when converting a NEO storage
with > 1 master nodes into a URI. Perhaps the rationale for this exception
was that there isn't any agreed on order of master nodes in a NEO URI,
which means that building a URI from such a storage could potentially
break the invariant that any client which points to the same storage
should result in the same WCFS mountpoint.
With levin.zimmermann/wendelin.core@6f5196fa we can now rely on
WCFS mountpoint calculation to always return the same mountpoint even if
the order of master node addresses differ. Therefore we can drop this
exception and allow WCFS to support NEO clusters with more than one master.

--------

kirr: support for multiple masters was simply not implemented because in
a05db040 (lib/zodb: Teach zstor_2zurl about ZEO, NEO and Demo storages)
I though that we do not yet actually need it and wanted to have
something minimal first.

I agree that in WCFS context it is ok and makes sense to normalize zurl
to have masters coming in particular order. But at zstor_2zurl level we
rely on the order of masters that app.nm.getMasterList gives us. The
normalization is separate function.

/reviewed-by @kirr
/reviewed-on nexedi/wendelin.core!17

The function to do it was there, but I missed to add corresponding defer.
Fixes 6f0cdaff (wcfs: Provide isolation to clients).

Update all dependencies of WCFS to their recent versions:

- go123: add support for go1.18 and go1.19
- neo: update to latest draft
- go-fuse: update to pick up https://github.com/hanwen/go-fuse/commit/4a0e6eb5
- ogórek: no change, just the version we already had was released as v1.2.0
- testify: some bugfixes (we use this package only during tests)

The following dependencies were not updated by upstream at all:

- glog
- overflow
- pkg/errors

.

This patch allows using WCFS with a NEO or ZEO storage which is
reachable by a URL which contains an ipv6 host.

Without this patch the following example doesn't work:

>>> from wendelin.lib.zodb import dbopen
>>> root = dbopen("neo://cluster-name@[::1]:2051")
>>> # "abc" points to a ZBigArray
>>> root["abc"][0]

It doesn't work because the parser missed adding square brackets around
ipv6 hosts, due to which unparsing the resulting URL resulted in a wrong
interpretation where a port starts.

This patch furthermore amends 'test_zstor_2zurl' to test ZEO and NEO
storages with ipv6 hosts.

---

/reviewed-by @kirr
/reviewed-on nexedi/wendelin.core!13

This patch adds comprehensive tests for 'wendelin.lib.zodb.zstor_2zurl'.
Before this patch only one related test existed ('test_zurlstable').
This test only lightly checked correct functionality of 'zstor_2zurl'.
Therefore we added the new tests 'test_zstor_2zurl' and
'test_zurlsamedb'.

The new tests only cover existing functionality.

---

Co-authored-by: kirr

/reviewed-by @kirr
/reviewed-on nexedi/wendelin.core!13

Before this patch 'zsync(storage)' was effectless for ZEO storages, it
didn't synchronize the client with the server. This patch fixes 'zsync',
so that it also performs synchronization of ZEO clients.

Background information:
=======================

2006 the sync mode of ZEO has been removed:

  nexedi/ZEO@629b0667

and only async mode was supported from then. This means, that the "sync"
method of ZEO.ClientStorage was in fact effectless. In ZEO 5 the
"server-sync" option has been added:

  https://github.com/zopefoundation/ZEO/pull/63

Setting this option to 'True' makes the 'sync' method performing a
"server round trip, thus causing client to wait for outstanding
invalidations" [1]. In this patch we imitate the effect of this flag
for both ZEO 4 and ZEO 5.

[1] https://github.com/zopefoundation/ZEO/blob/423cb8563be3e1ee0bb4297ee980d9b74f09c710/src/ZEO/ClientStorage.py#L225-L226

---

/reviewed-by @kirr
/reviewed-on nexedi/wendelin.core!13

The 'shape' argument of 'numpy.ndarray's initialization method accepts
integer and sequences of integers. But the 'shape' property of
'numpy.ndarray' always returns tuple[int, ...], so numpy manually
casts any legal argument into tuple[int, ...].

In 'BigArray' and 'ZBigArray' this internal casting didn't exist yet.
This patch adds the casting.

Before:

  ZBigArray(shape=[1, 2, 3], dtype=float).shape == [1, 2, 3]

After:

  ZBigArray(shape=[1, 2, 3], dtype=float).shape == (1, 2, 3)

In this way BigArray and ZBigArray API behaves closer to numpy.ndaray,
which should help avoiding confusion when people are using BigArray /
ZBigArray.

-----

See issue nexedi/wendelin.core#9 and
MR nexedi/wendelin.core!14
for additional context.

/reviewed-by @kirr
/reviewed-on nexedi/wendelin.core!14

Wendelin.core already supports Python3 relatively well, but demo_zbigarray.py,
that is invoked only manually, was missing compatibility bits for xrange:

    (neo) (py3.venv) (g.env) kirr@deca:~/src/neo/src/lab.nexedi.com/nexedi/wendelin.core$ ./demo/demo_zbigarray.py gen 1.fs
    I: RAM:  15.29GB
    I: WORK: 30.57GB
    gen signal t=0...4.10e+09  float64  (= 30.57GB)
    Traceback (most recent call last):
      File "/home/kirr/src/wendelin/wendelin.core/./demo/demo_zbigarray.py", line 154, in <module>
        main()
      File "/home/kirr/src/wendelin/venv/py3.venv/lib/python3.9/site-packages/decorator.py", line 232, in fun
        return caller(func, *(extras + args), **kw)
      File "/home/kirr/src/tools/go/pygolang/golang/__init__.py", line 103, in _
        return f(*argv, **kw)
      File "/home/kirr/src/wendelin/wendelin.core/./demo/demo_zbigarray.py", line 142, in main
        gen(sig)
      File "/home/kirr/src/wendelin/wendelin.core/./demo/demo_zbigarray.py", line 74, in gen
        for t0 in xrange(0, len(a), blocksize):
    NameError: name 'xrange' is not defined

-> Fix it.

Arnaud reports that wendelin.core currently cannot be installed on
Python3:

    /opt/slapgrid/3f9add9291086dee302fc478df4b3130/parts/python3/bin/python3 /tmp/tmp1fuxchsb -q develop -mN -d /opt/slapgrid/3f9add9291086dee302fc478df4b3130/develop-eggs/tmps5jr7ymsbuild
    /opt/slapgrid/3f9add9291086dee302fc478df4b3130/eggs/setuptools-44.1.1-py3.7.egg/setuptools/dist.py:476: UserWarning: Normalizing '2.0.alpha2.post1' to '2.0a2.post1'
    package init file '__init__.py' not found (or not a regular file)
    Traceback (most recent call last):
     File "/tmp/tmp1fuxchsb", line 19, in <module>
       exec(compile(f.read(), '/opt/slapgrid/3f9add9291086dee302fc478df4b3130/parts/wendelin.core/setup.py', 'exec'))
     File "/opt/slapgrid/3f9add9291086dee302fc478df4b3130/parts/wendelin.core/setup.py", line 426, in <module>
       """.splitlines()]
     File "/opt/slapgrid/3f9add9291086dee302fc478df4b3130/develop-eggs/pygolang-0.1-py3.7-linux-x86_64.egg/golang/pyx/build.py", line 118, in setup
       setuptools_dso.setup(**kw)
     File "/opt/slapgrid/3f9add9291086dee302fc478df4b3130/eggs/setuptools_dso-1.7-py3.7.egg/setuptools_dso/__init__.py", line 37, in setup
       _setup(**kws)
     File "/opt/slapgrid/3f9add9291086dee302fc478df4b3130/eggs/setuptools-44.1.1-py3.7.egg/setuptools/__init__.py", line 162, in setup
     File "/opt/slapgrid/3f9add9291086dee302fc478df4b3130/parts/python3/lib/python3.7/distutils/core.py", line 148, in setup
       dist.run_commands()
     File "/opt/slapgrid/3f9add9291086dee302fc478df4b3130/parts/python3/lib/python3.7/distutils/dist.py", line 966, in run_commands
       self.run_command(cmd)
     File "/opt/slapgrid/3f9add9291086dee302fc478df4b3130/parts/python3/lib/python3.7/distutils/dist.py", line 985, in run_command
       cmd_obj.run()
     File "/opt/slapgrid/3f9add9291086dee302fc478df4b3130/eggs/setuptools-44.1.1-py3.7.egg/setuptools/command/develop.py", line 38, in run
     File "/opt/slapgrid/3f9add9291086dee302fc478df4b3130/eggs/setuptools-44.1.1-py3.7.egg/setuptools/command/develop.py", line 136, in install_for_development
     File "/opt/slapgrid/3f9add9291086dee302fc478df4b3130/parts/python3/lib/python3.7/distutils/cmd.py", line 313, in run_command
       self.distribution.run_command(command)
     File "/opt/slapgrid/3f9add9291086dee302fc478df4b3130/parts/python3/lib/python3.7/distutils/dist.py", line 985, in run_command
       cmd_obj.run()
     File "/opt/slapgrid/3f9add9291086dee302fc478df4b3130/eggs/setuptools-44.1.1-py3.7.egg/setuptools/command/egg_info.py", line 296, in run
     File "/opt/slapgrid/3f9add9291086dee302fc478df4b3130/eggs/setuptools-44.1.1-py3.7.egg/setuptools/command/egg_info.py", line 303, in find_sources
     File "/opt/slapgrid/3f9add9291086dee302fc478df4b3130/eggs/setuptools-44.1.1-py3.7.egg/setuptools/command/egg_info.py", line 537, in run
     File "/opt/slapgrid/3f9add9291086dee302fc478df4b3130/eggs/setuptools-44.1.1-py3.7.egg/setuptools/command/egg_info.py", line 591, in prune_file_list
     File "/opt/slapgrid/3f9add9291086dee302fc478df4b3130/eggs/setuptools-44.1.1-py3.7.egg/setuptools/command/egg_info.py", line 452, in prune
     File "/opt/slapgrid/3f9add9291086dee302fc478df4b3130/eggs/setuptools-44.1.1-py3.7.egg/setuptools/command/egg_info.py", line 405, in _remove_files
    TypeError: cannot use a string pattern on a bytes-like object
    While:
     Installing wendelin.core.

The problem turned out to be that git-lsfiles output, that we add into
list of source files, is bytes and it breaks when those bytes get
intermixed into strings.

-> Fix it by always returning from runcmd the str type of current python.

/reported-by @arnau

Similarly to build_ext we need ccan/config.h to be present for dso to
build. It was not the case and so pip install wendelin.core was failing:

    $ pip install wendelin.core-2.0a2.tar.gz
    Processing ./wendelin.core-2.0a2.tar.gz
      Installing build dependencies ... done
      Getting requirements to build wheel ... done
        Preparing wheel metadata ... done
    Collecting ZODB>=4
    ...
    Building wheels for collected packages: wendelin.core
      Building wheel for wendelin.core (PEP 517) ... error
      ERROR: Command errored out with exit status 1:
      ...
      running build_dso
      Building DSOs
      building 'wendelin.bigfile.libvirtmem' DSO as build/lib.linux-x86_64-2.7/wendelin/bigfile/liblibvirtmem.so
      creating build/temp.linux-x86_64-2.7
      creating build/temp.linux-x86_64-2.7/bigfile
      creating build/temp.linux-x86_64-2.7/lib
      x86_64-linux-gnu-gcc -pthread -fno-strict-aliasing -Wdate-time -D_FORTIFY_SOURCE=2 -g -ffile-prefix-map=/build/python2.7-vgIf7a/python2.7-2.7.18=. -fstack-protector-strong -Wformat -Werror=format-security -fPIC -D_GNU_SOURCE -I/tmp/pip-build-env-lfVr7E/overlay/lib/python2.7/site-packages -I. -I./include -I./3rdparty/ccan -I./3rdparty/include -Ibuild/lib.linux-x86_64-2.7/. -c bigfile/pagefault.c -o build/temp.linux-x86_64-2.7/bigfile/pagefault.o -fno-strict-aliasing -std=gnu99 -fplan9-extensions -Wno-declaration-after-statement -Wno-error=declaration-after-statement
      In file included from ./include/wendelin/list.h:11,
                       from ./include/wendelin/bigfile/virtmem.h:50,
                       from bigfile/pagefault.c:29:
      ./3rdparty/ccan/ccan/array_size/array_size.h:4:10: fatal error: config.h: Нет такого файла или каталога
          4 | #include "config.h"
            |          ^~~~~~~~~~
      compilation terminated.
      error: command 'x86_64-linux-gnu-gcc' failed with exit status 1
      ----------------------------------------
      ERROR: Failed building wheel for wendelin.core
    Failed to build wendelin.core
    ERROR: Could not build wheels for wendelin.core which use PEP 517 and cannot be installed directly

-> Fix it by making build_dso also first come through `make all`.

NOTE we cannot fix it in exactly the same way as for build_ext: if we split
build_dso into build_dso and ll_build_dso, `make all` will still go to infinite
recursion: build_dso -> ll_build_dso -> build_dso (not ll_build_dso, this is controlled by setuptools_dso) -> oops.

Starting from version 0.1 pygolang provides File out of the box:

nexedi/pygolang@4690460b
https://pypi.org/project/pygolang/#pygolang-change-history

-> Use it and remove our custom File implementation that originally
served as POC for that pygolang functionality.

Don't use golang::* namespaces to avoid clashes with pygolang adding
something in there and getting compilation error due to conflict, when
e.g. nexedi/pygolang!17 lands.

-> use xgolang:: as top-level namespace for what was previously living
in golang:: shipped in wendelin.core.

Inside that xgolang:: namespace don't use the same package names that
might be used inside golang:: in pygolang. This avoids ambiguation and
compile error in the future on e.g. os::AfterFork - is `using namespace
golang` and `using namespace xgolang` were both activated.

-> Prefix all namespaces inside xgolang:: also with "x".

See nexedi/pygolang!17

The problem is similar to a7bf0311 (wcfs: Fix crash if on invalidation
handledδZ needs to access ZODB) - I forgot to put zhead's transaction into
context.

Without the fix added test fails as:

    wcfs_test.py::test_wcfs_crash_old_data
    ---------------- live log call -----------------
    WARNING  ZODB.FileStorage:FileStorage.py:413 Ignoring index for /tmp/testdb_fs.OV0rS6/1.fs

    M: commit -> @at0 (03e5a3342bc5ab22)

    M: commit -> @at1 (03e5a3342bc88899)
    M:      f<0000000000000002>     [0]
    INFO     wcfs:__init__.py:293 starting for file:///tmp/testdb_fs.OV0rS6/1.fs ...
    I0120 17:12:10.274379  704327 wcfs.go:2393] start "/dev/shm/wcfs/556fa61a9f9675f34c6b44e1f978842c37176c59" "file:///tmp/testdb_fs.OV0rS6/1.fs"
    I0120 17:12:10.274409  704327 wcfs.go:2399] (built with go1.17.6)
    W0120 17:12:10.274560  704327 storage.go:152] zodb: FIXME: open file:///tmp/testdb_fs.OV0rS6/1.fs: raw cache is not ready for invalidations -> NoCache forced
    INFO     wcfs:__init__.py:334 started pid704327 @ /dev/shm/wcfs/556fa61a9f9675f34c6b44e1f978842c37176c59

    C: setup watch f<0000000000000002> @at1 (03e5a3342bc88899)
    #  pinok: {}

    M: commit -> @at2 (03e5a3342c895777)
    M:      f<0000000000000002>     [1]

    M: commit -> @at3 (03e5a3342ca5ef55)
    M:      f<0000000000000002>     [0]

    C: setup watch f<0000000000000002> @at2 (03e5a3342c895777)
    #  pinok: {0: @at1 (03e5a3342bc88899)}
    panic: transaction: no current transaction

    goroutine 88 [running]:
    lab.nexedi.com/kirr/neo/go/transaction.currentTxn({0x969718, 0xc0000b6240})
            /home/kirr/src/neo/src/lab.nexedi.com/kirr/neo/go/transaction/transaction.go:59 +0x77
    lab.nexedi.com/kirr/neo/go/transaction.Current(...)
            /home/kirr/src/neo/src/lab.nexedi.com/kirr/neo/go/transaction/api.go:206
    lab.nexedi.com/kirr/neo/go/zodb.(*Connection).checkTxnCtx(...)
            /home/kirr/src/neo/src/lab.nexedi.com/kirr/neo/go/zodb/connection.go:374
    lab.nexedi.com/kirr/neo/go/zodb.(*Connection).Get(0xc0000c25a0, {0x969718, 0xc0000b6240}, 0x4)
            /home/kirr/src/neo/src/lab.nexedi.com/kirr/neo/go/zodb/connection.go:331 +0x73
    lab.nexedi.com/nexedi/wendelin.core/wcfs/internal/zdata.(*ΔFtail).BlkRevAt(0xc00009dd40, {0x969718, 0xc0000b6240}, 0xc000100540, 0x30, 0x3e5a3342c895777)
            /home/kirr/src/neo/src/lab.nexedi.com/nexedi/wendelin.core/wcfs/internal/zdata/δftail.go:1140 +0x39d
    main.(*WatchLink).setupWatch(0xc0000120a0, {0x969718, 0xc0000b6240}, 0x2, 0x3e5a3342c895777)
            /home/kirr/src/neo/src/lab.nexedi.com/nexedi/wendelin.core/wcfs/wcfs.go:1754 +0xe3f
    main.(*WatchLink)._handleWatch(0x0, {0x969718, 0xc0000b6240}, {0xc0000a0122, 0x0})
            /home/kirr/src/neo/src/lab.nexedi.com/nexedi/wendelin.core/wcfs/wcfs.go:1973 +0x65
    main.(*WatchLink).handleWatch(0x0, {0x969718, 0xc0000b6240}, 0x0, {0xc0000a0122, 0x28})
            /home/kirr/src/neo/src/lab.nexedi.com/nexedi/wendelin.core/wcfs/wcfs.go:1955 +0x10c
    main.(*WatchLink)._serve.func3({0x969718, 0xc0000b6240})
            /home/kirr/src/neo/src/lab.nexedi.com/nexedi/wendelin.core/wcfs/wcfs.go:1944 +0x3c
    lab.nexedi.com/kirr/go123/xsync.(*WorkGroup).Go.func1()
            /home/kirr/src/neo/src/lab.nexedi.com/kirr/go123/xsync/xsync.go:86 +0x68
    created by lab.nexedi.com/kirr/go123/xsync.(*WorkGroup).Go
            /home/kirr/src/neo/src/lab.nexedi.com/kirr/go123/xsync/xsync.go:83 +0x92
    >>> Change history by file:

    f<0000000000000002>:
                                    0 1 2 3 4 5 6 7
                                    a b c d e f g h
            @at0 (03e5a3342bc5ab22)
            @at1 (03e5a3342bc88899) 0
            @at2 (03e5a3342c895777)   1
            @at3 (03e5a3342ca5ef55) 0

    ----------------------------------------

            # wcfs was crashing in setting up watch because of "1" and "2" from above, and
            # 3. setupWatch was calling ΔFtail.BlkRevAt without putting zhead's transaction into ctx.
            wl2 = t.openwatch()
    >       wl2.watch(zf, at2, {0:at1})

- put into if block to avoid collision with already-defined-elsewhere blkv
- show revisions in symbolic form

Noticed while working on recent change to allow ΔFtail/ΔBtail
point-queries with at=tail.

Watching with at=tail is inevitable as explained in the previous patch.

This is needed because when e.g. wcfs is just started the coverage of
ΔFtail is (head,head] i.e. empty, and if user wants to setup a watch
with at=head, it becomes watch with at=tail. Then that at is used in a
query and if point-queries with at=tail are disallowed it panics with
"at out of bounds".

This fixes crashes in test_wcfs_watch_setup (see 339f1884 "wcfs: tests:
Always start tDB with ZBigFile pre-created before WCFS startup") and in
test_wcfs_crash_old_data (see 97ce5105 "wcfs: tests: Add test do
demonstrate "at out of bounds" crash on readPinWatchers ->
ΔFtail.BlkRevAt")

For the reference zodb.ΔTail already allows point queries with at=tail:

https://lab.nexedi.com/kirr/neo/blob/1193c44e/go/zodb/δtail.go#L202-206
https://lab.nexedi.com/kirr/neo/blob/1193c44e/go/zodb/δtail.go#L225-228

The codepath that sends pin messages to watchers on FUSE READ, similarly
to what was showed in 339f1884 is also vulnerable to "at out of bounds"
panic if at=ΔFtail.tail:

    wcfs_test.py::test_wcfs_crash_old_data
    ---------------- live log call -----------------
    WARNING  ZODB.FileStorage:FileStorage.py:413 Ignoring index for /tmp/testdb_fs.nbSKXu/1.fs

    M: commit -> @at0 (03e5a31e5e5ef6bb)

    M: commit -> @at1 (03e5a31e5e63fa77)
    M:      f<0000000000000002>     [0]
    INFO     wcfs:__init__.py:293 starting for file:///tmp/testdb_fs.nbSKXu/1.fs ...
    I0120 16:50:22.136098  697106 wcfs.go:2393] start "/dev/shm/wcfs/93026d44ef96f87df2cc0e2e451c5aabee91b652" "file:///tmp/testdb_fs.nbSKXu/1.fs"
    I0120 16:50:22.136127  697106 wcfs.go:2399] (built with go1.17.6)
    W0120 16:50:22.136233  697106 storage.go:152] zodb: FIXME: open file:///tmp/testdb_fs.nbSKXu/1.fs: raw cache is not ready for invalidations -> NoCache forced
    INFO     wcfs:__init__.py:334 started pid697106 @ /dev/shm/wcfs/93026d44ef96f87df2cc0e2e451c5aabee91b652

    C: setup watch f<0000000000000002> @at1 (03e5a31e5e63fa77)
    #  pinok: {}
    panic: at out of bounds: at: @03e5a31e5e63fa77,  (tail, head] = (@03e5a31e5e63fa77, @03e5a31e5e63fa77]

    goroutine 7 [running]:
    lab.nexedi.com/nexedi/wendelin.core/wcfs/internal/zdata.panicf(...)
            /home/kirr/src/neo/src/lab.nexedi.com/nexedi/wendelin.core/wcfs/internal/zdata/misc.go:47
    lab.nexedi.com/nexedi/wendelin.core/wcfs/internal/zdata.(*ΔFtail).BlkRevAt(0xc0000a5d40, {0x969718, 0xc000076140}, 0xc0001a22a0, 0xc0001c0200, 0x3e5a31e5e63fa77)
            /home/kirr/src/neo/src/lab.nexedi.com/nexedi/wendelin.core/wcfs/internal/zdata/δftail.go:1077 +0xa45
    main.(*BigFile).readPinWatchers(0xc0001d0200, {0x969718, 0xc000076140}, 0x0, 0xffffffffffffffff)
            /home/kirr/src/neo/src/lab.nexedi.com/nexedi/wendelin.core/wcfs/wcfs.go:1559 +0x2a5
    main.(*BigFile).readBlk(0xc0001d0200, {0x969718, 0xc000076140}, 0x0, {0xc000320000, 0x200000, 0x0})
            /home/kirr/src/neo/src/lab.nexedi.com/nexedi/wendelin.core/wcfs/wcfs.go:1281 +0x4d2
    main.(*BigFile).Read.func1({0x969718, 0xc000076140})
            /home/kirr/src/neo/src/lab.nexedi.com/nexedi/wendelin.core/wcfs/wcfs.go:1223 +0x71
    lab.nexedi.com/kirr/go123/xsync.(*WorkGroup).Go.func1()
            /home/kirr/src/neo/src/lab.nexedi.com/kirr/go123/xsync/xsync.go:86 +0x68
    created by lab.nexedi.com/kirr/go123/xsync.(*WorkGroup).Go
            /home/kirr/src/neo/src/lab.nexedi.com/kirr/go123/xsync/xsync.go:83 +0x92
    >>> Change history by file:

    f<0000000000000002>:
                                    0 1 2 3 4 5 6 7
                                    a b c d e f g h
            @at0 (03e5a31e5e5ef6bb)
            @at1 (03e5a31e5e63fa77) 0

    ...

        @func
        def test_wcfs_crash_old_data():
            # start wcfs with ΔFtail/ΔBtail not covering that initial data.
            t = tDB(old_data=[{0:'a'}]); zf = t.zfile; at1 = t.head
            defer(t.close)

            f = t.open(zf)

            # ΔFtail coverage is currently (at1,at1]
            wl = t.openwatch()
            wl.watch(zf, at1, {})

            # wcfs is crashing on readPinWatcher -> ΔFtail.BlkRevAt with
            #   "at out of bounds: at: @at1,  (tail,head] = (@at1,@at1]
            # because BlkRevAt(at=tail) query was disallowed.
    >       f.assertBlk(0, 'a')          # [0] becomes tracked

Still also crashing in test_wcfs_watch_setup.

Soon this test will also exercise functionality from isolation protocol
as well and so it will stop to be basic.

Move plus rename test_wcfs_basic_invalidation_wo_dFtail_coverage ->
test_wcfs_crash_old_data.

Still crashing in test_wcfs_watch_setup.

This semantically moves initialization code from
test_wcfs_basic_invalidation_wo_dFtail_coverage (see a7bf0311 "wcfs: Fix
crash if on invalidation handledδZ needs to access ZODB") to tDB itself,
and will be useful to exercise similar scenarios in other tests.

Still crashing in test_wcfs_watch_setup.

This should hopefully exercise codepaths in wcfs.go a bit more for
mistakes similar to a7bf0311 (wcfs: Fix crash if on invalidation
handledδZ needs to access ZODB) where the code on server side forgets to
put zhead's transaction into context.

Currently, because watching @tail is disallowed, this leads to panic triggered by test_wcfs_watch_setup:

    @at0 (03e59e3e606b89bb) -> @at1 (03e59e3e610692bb) -> @at2 (03e59e3e612a5811) -> @at3 (03e59e3e614fa9cc) -> @at4 (03e59e3e6189c3ee) -> @at5 (03e59e3e61af0baa)

    C: setup watch f<0000000000000002> @at0 (03e59e3e606b89bb)
    #  pinok: {0: @at0 (03e59e3e606b89bb), 2: @at0 (03e59e3e606b89bb), 3: @at0 (03e59e3e606b89bb), 5: @at0 (03e59e3e606b89bb)}
    panic: at out of bounds: at: @03e59e3e606b89bb,  (tail, head] = (@03e59e3e606b89bb, @03e59e3e61af0baa]

    goroutine 187 [running]:
    lab.nexedi.com/nexedi/wendelin.core/wcfs/internal/zdata.panicf(...)
            /home/kirr/src/neo/src/lab.nexedi.com/nexedi/wendelin.core/wcfs/internal/zdata/misc.go:47
    lab.nexedi.com/nexedi/wendelin.core/wcfs/internal/zdata.(*ΔFtail).BlkRevAt(0xc000077d40, {0x969718, 0xc000062940}, 0xc0003060c0, 0x4174f4, 0x3e59e3e606b89bb)
            /home/kirr/src/neo/src/lab.nexedi.com/nexedi/wendelin.core/wcfs/internal/zdata/δftail.go:1077 +0xa45
    main.(*WatchLink).setupWatch(0xc000108050, {0x969718, 0xc000062940}, 0x2, 0x3e59e3e606b89bb)
            /home/kirr/src/neo/src/lab.nexedi.com/nexedi/wendelin.core/wcfs/wcfs.go:1754 +0xe3f
    main.(*WatchLink)._handleWatch(0x0, {0x969718, 0xc000062940}, {0xc00001c812, 0xa00000})
            /home/kirr/src/neo/src/lab.nexedi.com/nexedi/wendelin.core/wcfs/wcfs.go:1973 +0x65
    main.(*WatchLink).handleWatch(0x74039b, {0x969718, 0xc000062940}, 0xc0000a4280, {0xc00001c812, 0x28})
            /home/kirr/src/neo/src/lab.nexedi.com/nexedi/wendelin.core/wcfs/wcfs.go:1955 +0x10c
    main.(*WatchLink)._serve.func3({0x969718, 0xc000062940})
            /home/kirr/src/neo/src/lab.nexedi.com/nexedi/wendelin.core/wcfs/wcfs.go:1944 +0x3c
    lab.nexedi.com/kirr/go123/xsync.(*WorkGroup).Go.func1()
            /home/kirr/src/neo/src/lab.nexedi.com/kirr/go123/xsync/xsync.go:86 +0x68
    created by lab.nexedi.com/kirr/go123/xsync.(*WorkGroup).Go
            /home/kirr/src/neo/src/lab.nexedi.com/kirr/go123/xsync/xsync.go:83 +0x92
    >>> Change history by file:

    f<0000000000000002>:
                                    0 1 2 3 4 5 6 7
                                    a b c d e f g h
            @at0 (03e59e3e606b89bb)
            @at1 (03e59e3e610692bb)     2
            @at2 (03e59e3e612a5811)     2 3 4 5
            @at3 (03e59e3e614fa9cc) 0   2     5
            @at4 (03e59e3e6189c3ee)     2   4 5
            @at5 (03e59e3e61af0baa)       3   5

However next we will anyway need to allow to setup watches @tail, and so
we will be fixing this and other errors in followup commits.

NOTE: we don't loose coverage for the case when ZBigFile is created after wcfs
startup due to test_wcfs_watch_2files, where that scenario is tested.

ΔFtail/ΔBtail tests also exercise ZBigFile/BTree epochs
(creation/deletion) well.

tDB.commit always creates only one transaction and so wcfs should be
expected to catch up with only that single one -> no need to loop.

No need to keep tDB._wc_zheadv as we have information about all
committed transactions in t.dFtail.

.commit is the only caller of ._wcsync. .commit is also the only place
via which tests are intended to modify ZODB.

- .commit performs ZODB commit and synchronizes WCFS to database changes;
- ._commit performs ZODB commit without WCFS synchronization.

We will soon need ._commit to create initial revisions for ZBigFile
while WCFS is not yet started.

If we do not setup logging explicitly, it will print only

    No handlers could be found for logger "wcfs"

instead of emitting useful details in before e.g.

    RuntimeError: fuse_unmount /dev/shm/wcfs/<X>: failed: fusermount: failed to unmount /dev/shm/wcfs/<X>: Device or resource busy
    (more details logged)

-> Fix it.

The invalidation logic is generally right, but invalidateBlk -> ΔFtail.BlkRevAt
was being called with ctx without transaction. As the result it was
panicking as

    panic: transaction: no current transaction

    goroutine 41 [running]:
    lab.nexedi.com/kirr/neo/go/transaction.currentTxn({0x9696d8, 0xc0000d8080})
            /home/kirr/src/neo/src/lab.nexedi.com/kirr/neo/go/transaction/transaction.go:59 +0x77
    lab.nexedi.com/kirr/neo/go/transaction.Current(...)
            /home/kirr/src/neo/src/lab.nexedi.com/kirr/neo/go/transaction/api.go:206
    lab.nexedi.com/kirr/neo/go/zodb.(*Connection).checkTxnCtx(...)
            /home/kirr/src/neo/src/lab.nexedi.com/kirr/neo/go/zodb/connection.go:374
    lab.nexedi.com/kirr/neo/go/zodb.(*Connection).Get(0xc00010c640, {0x9696d8, 0xc0000d8080}, 0x4)
            /home/kirr/src/neo/src/lab.nexedi.com/kirr/neo/go/zodb/connection.go:331 +0x73
    lab.nexedi.com/nexedi/wendelin.core/wcfs/internal/zdata.(*ΔFtail).BlkRevAt(0xc000077d40, {0x9696d8, 0xc0000d8080}, 0xc000064f60, 0x0, 0x3e5983329bbd100)
            /home/kirr/src/neo/src/lab.nexedi.com/nexedi/wendelin.core/wcfs/internal/zdata/δftail.go:1140 +0x39d
    main.(*BigFile).invalidateBlk.func1(0xc000164400, {0x9696d8, 0xc0000d8080}, 0xc0005a0000, 0x200000, 0x200000, {0xc0005a0000, 0x200000, 0x200000})
            /home/kirr/src/neo/src/lab.nexedi.com/nexedi/wendelin.core/wcfs/wcfs.go:1089 +0xb8
    main.(*BigFile).invalidateBlk(0xc000164400, {0x9696d8, 0xc0000d8080}, 0x0)
            /home/kirr/src/neo/src/lab.nexedi.com/nexedi/wendelin.core/wcfs/wcfs.go:1105 +0x3bb
    main.(*Root).handleδZ.func3({0x9696d8, 0xc0000d8080})
            /home/kirr/src/neo/src/lab.nexedi.com/nexedi/wendelin.core/wcfs/wcfs.go:898 +0x34
    lab.nexedi.com/kirr/go123/xsync.(*WorkGroup).Go.func1()
            /home/kirr/src/neo/src/lab.nexedi.com/kirr/go123/xsync/xsync.go:86 +0x68
    created by lab.nexedi.com/kirr/go123/xsync.(*WorkGroup).Go
            /home/kirr/src/neo/src/lab.nexedi.com/kirr/go123/xsync/xsync.go:83 +0x92

on any new change to tracked file block whose previous history is not covered by ΔFtail/ΔBtail.

Problem reported by @Francois.

Fixes the following warning that started to appear:

    kirr@deca:~/src/wendelin/wendelin.core/t$ ./qemu-runlinux -g  /home/kirr/src/linux/obj-qemu_debug/arch/x86/boot/bzImage /bin/bash
    qemu-system-x86_64: warning: 9p: Multiple devices detected in same VirtFS export, which might lead to file ID collisions and severe misbehaviours on guest! You should either use a separate export for each device shared from host or use virtfs option 'multidevs=remap'!

See https://wiki.qemu.org/Documentation/9psetup for documentation of
multidevs option.

In 5c8340d2 we said:

    dbclose now uses defer almost everywhere - there are still few places in
    tests, where one test function is opening/closing test database multiple
    times - those were not (yet ?) converted.

Let's convert those remaining places now, because when wendelin.core
tests are run wrt plain ZODB4 (contrary to ZODB4-wc2), many tests fail
at fileh_open time, e.g.

        @func
        def test_bigfile_filezodb_fileh_gc():
            root1= dbopen()
            conn1= root1._p_jar
            db   = conn1.db()
            defer(db.close)
            root1['zfile4'] = f1 = ZBigFile(blksize)
            transaction.commit()

    >       fh1  = f1.fileh_open()

    bigfile/tests/test_filezodb.py:588:
    _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
    bigfile/file_zodb.py:603: in fileh_open
        fileh = _ZBigFileH(self, _use_wcfs)
    bigfile/file_zodb.py:664: in __init__
        self.zfileh = zfile._v_file.fileh_open(use_wcfs)
    bigfile/_file_zodb.pyx:112: in wendelin.bigfile._file_zodb._ZBigFile.fileh_open
        pywconn   = wczsync.pywconnOf(zconn)
    wcfs/client/_wczsync.pyx:56: in wendelin.wcfs.client._wczsync.pywconnOf
        wconn = wc.connect(zconn_at(zconn))
    lib/zodb.py:163: in zconn_at
        "nexedi/ZODB!1")
    _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

    patch = 'conn:MVCC-via-loadBefore-only', details_link = 'nexedi/ZODB!1'

        def _zassertHasNXDPatch(patch, details_link):
            if not _zhasNXDPatch(patch):
                raise AssertionError(
                    "ZODB%s is not patched with required Nexedi patch %r\n\tSee %s for details" %
    >               (zmajor, patch, details_link))
    E           AssertionError: ZODB4 is not patched with required Nexedi patch 'conn:MVCC-via-loadBefore-only'
    E               See nexedi/ZODB!1 for details

and DB is left unclosed.

This change should reduce, if not completely fix, the number of
leaked /tmp/testdb_* directories for Wendelin.core.UnitTest-ZODB4(xfail) testsuite.

When WCFS-mmapped memory is accessed, it can get SIGBUS on IO error (and
automatically on WCFS crash), and SIGSEGV when accessed client mapping is closed.

tFile.assertBlk in wcfs_test.py already converts SIGSEGV into python
exception when accessing on-wcfs file's block. However
tMapping.assertBlk was not doing so, which, instead of providing proper
details, leads to test crashes if something goes wrong.

For example when wendelin.core tests are run wrt plain ZODB4 (contrary to
ZODB4-wc2, see ZODB!1 and
slapos@e256ed97), it first fails in
pinner and then gets SIGSEGV on data access, because, to mimic SIGBUS on
EIO, pinner shutdowns all mappings on its failure:

https://lab.nexedi.com/nexedi/wendelin.core/blob/49f826b1/wcfs/client/wcfs.cpp#L477-501
https://nexedijs.erp5.net/#/test_result_module/20211118-7C45220A/25

-> Fix it by wrapping test block access with appropriate read_exfault
variant.

Before this patch:

    .../wendelin.core$ WENDELIN_CORE_TEST_DB='<zeo>' WENDELIN_CORE_VIRTMEM='r:wcfs+w:uvmm' python -m pytest -vsx wcfs/ -k test_wcfs_client
    ...
    wcfs/client/client_test.py::test_wcfs_client
    -------------------- live log call ---------------------
    INFO     wcfs:__init__.py:293 starting for zeo://localhost:28866 ...
    I1122 19:17:14.376182  110032 wcfs.go:2384] start "/dev/shm/wcfs/ef87339c054c3e0e48d494fa584bb209518844b2" "zeo://localhost:28866"
    I1122 19:17:14.376291  110032 wcfs.go:2390] (built with go1.17.3)
    W1122 19:17:14.380882  110032 storage.go:152] zodb: FIXME: open zeo://localhost:28866: raw cache is not ready for invalidations -> NoCache forced
    INFO     wcfs:__init__.py:334 started pid110032 @ /dev/shm/wcfs/ef87339c054c3e0e48d494fa584bb209518844b2

    M: commit -> @at0 (03e452313dddbc00)

    M: commit -> @at1 (03e452313e0f3b99)
    M:      f<0000000000000002>     [2, 3]

    M: commit -> @at2 (03e452313e1adb55)
    M:      f<0000000000000002>     [2]

    M: commit -> @at3 (03e452313e3be500)
    M:      f<0000000000000002>     [3, 4]
    W1122 19:17:14.597654  110032 wcfs.go:2050] /@03e452313d343c88/bigfile: lookup "0000000000000002": bigfopen 0000000000000002 @03e452313d343c88: invalid argument: Get 0000000000000002: Get 03e452313d343c88:0000000000000002: zeo://localhost:28866: load 03e452313d343c88:0000000000000002: 0000000000000002: no such object
    E1122 19:17:14.597759  110032 wcfs.go:1220] /head/bigfile/0000000000000002: readblk #4: pin watchers: wlink1: f<0000000000000002>: pin #4 @03e452313d343c88: expect "ack"; got "nak: _remmapblk #4 @03e452313d343c88: open /dev/shm/wcfs/ef87339c054c3e0e48d494fa584bb209518844b2/@03e452313d343c88/bigfile/0000000000000002: Invalid argument"
    F1122 19:17:14.597803  110050 wcfs/client/wcfs.cpp:487] CRITICAL: pinner: pin f<0000000000000002> #4 @03e452313d343c88: _remmapblk #4 @03e452313d343c88: open /dev/shm/wcfs/ef87339c054c3e0e48d494fa584bb209518844b2/@03e452313d343c88/bigfile/0000000000000002: Invalid argument
    F1122 19:17:14.597835  110050 wcfs/client/wcfs.cpp:488] CRITICAL: wcfs server will likely kill us soon.
    CRITICAL: pinner: pin f<0000000000000002> #4 @03e452313d343c88: _remmapblk #4 @03e452313d343c88: open /dev/shm/wcfs/ef87339c054c3e0e48d494fa584bb209518844b2/@03e452313d343c88/bigfile/0000000000000002: Invalid argument
    CRITICAL: wcfs server will likely kill us soon.
    Segmentation fault: read @00007ff7b9534000
    /home/kirr/src/wendelin/wendelin.core/wcfs/client/./../../bigfile/liblibvirtmem.so(dump_traceback+0x34)[0x7ff7d6b5c279]
    /home/kirr/src/wendelin/wendelin.core/wcfs/client/./../../bigfile/liblibvirtmem.so(+0x27b0)[0x7ff7d6b577b0]
    /lib/x86_64-linux-gnu/libpthread.so.0(+0x14140)[0x7ff7da078140]
    python(PyString_FromStringAndSize+0x228)[0x5627feb96b58]
    python(PyEval_EvalFrameEx+0x603e)[0x5627febb7a4e]
    python(PyEval_EvalCodeEx+0x57c)[0x5627febb03cc]
    ...
    python(PyObject_Call+0x43)[0x5627feb9d903]
    python(+0x18a7e1)[0x5627fec5d7e1]
    python(Py_Main+0x3ad)[0x5627fec4b8ed]
    /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xea)[0x7ff7d9d59d0a]
    python(_start+0x2a)[0x5627fec4b46a]
    Ошибка сегментирования (стек памяти сброшен на диск)

After this patch:

    .../wendelin.core$ WENDELIN_CORE_TEST_DB='<zeo>' WENDELIN_CORE_VIRTMEM='r:wcfs+w:uvmm' python -m pytest -vsx wcfs/ -k test_wcfs_client
    ...
    wcfs/client/client_test.py::test_wcfs_client
    -------------------- live log call ---------------------
    INFO     wcfs:__init__.py:293 starting for zeo://localhost:22854 ...
    I1122 18:17:22.486445  102541 wcfs.go:2384] start "/dev/shm/wcfs/c818c147676f8d6f3b408b02f727aca5e3229e98" "zeo://localhost:22854"
    I1122 18:17:22.486525  102541 wcfs.go:2390] (built with go1.17.3)
    W1122 18:17:22.489908  102541 storage.go:152] zodb: FIXME: open zeo://localhost:22854: raw cache is not ready for invalidations -> NoCache forced
    INFO     wcfs:__init__.py:334 started pid102541 @ /dev/shm/wcfs/c818c147676f8d6f3b408b02f727aca5e3229e98

    M: commit -> @at0 (03e451f560834477)

    M: commit -> @at1 (03e451f560a2aa77)
    M:      f<0000000000000002>     [2, 3]

    M: commit -> @at2 (03e451f560adafcc)
    M:      f<0000000000000002>     [2]

    M: commit -> @at3 (03e451f560d02111)
    M:      f<0000000000000002>     [3, 4]
    W1122 18:17:22.703710  102541 wcfs.go:2050] /@03e451f55fcc4c77/bigfile: lookup "0000000000000002": bigfopen 0000000000000002 @03e451f55fcc4c77: invalid argument: Get 0000000000000002: Get 03e451f55fcc4c77:0000000000000002: zeo://localhost:22854: load 03e451f55fcc4c77:0000000000000002: 0000000000000002: no such object
    E1122 18:17:22.703840  102541 wcfs.go:1220] /head/bigfile/0000000000000002: readblk #4: pin watchers: wlink1: f<0000000000000002>: pin #4 @03e451f55fcc4c77: expect "ack"; got "nak: _remmapblk #4 @03e451f55fcc4c77: open /dev/shm/wcfs/c818c147676f8d6f3b408b02f727aca5e3229e98/@03e451f55fcc4c77/bigfile/0000000000000002: Invalid argument"
    F1122 18:17:22.704380  102558 wcfs/client/wcfs.cpp:487] CRITICAL: pinner: pin f<0000000000000002> #4 @03e451f55fcc4c77: _remmapblk #4 @03e451f55fcc4c77: open /dev/shm/wcfs/c818c147676f8d6f3b408b02f727aca5e3229e98/@03e451f55fcc4c77/bigfile/0000000000000002: Invalid argument
    F1122 18:17:22.704639  102558 wcfs/client/wcfs.cpp:488] CRITICAL: wcfs server will likely kill us soon.
    CRITICAL: pinner: pin f<0000000000000002> #4 @03e451f55fcc4c77: _remmapblk #4 @03e451f55fcc4c77: open /dev/shm/wcfs/c818c147676f8d6f3b408b02f727aca5e3229e98/@03e451f55fcc4c77/bigfile/0000000000000002: Invalid argument
    CRITICAL: wcfs server will likely kill us soon.
    >>> Change history by file:

    f<0000000000000002>:
                                    0 1 2 3 4 5 6 7
                                    a b c d e f g h
            @at0 (03e451f560834477)
            @at1 (03e451f560a2aa77)     2 3
            @at2 (03e451f560adafcc)     2
            @at3 (03e451f560d02111)       3 4

    INFO     wcfs:__init__.py:400 unmount/stop wcfs pid102541 @ /dev/shm/wcfs/c818c147676f8d6f3b408b02f727aca5e3229e98
    I1122 18:17:22.728452  102541 wcfs.go:2560] stop "/dev/shm/wcfs/c818c147676f8d6f3b408b02f727aca5e3229e98" "zeo://localhost:22854"
    FAILED

    ======================= FAILURES =======================
    ___________________ test_wcfs_client ___________________

        @func
        def test_wcfs_client():
            t = tDB(); zf = t.zfile; at0=t.at0
            defer(t.close)
            pinned = lambda fh: fhpinned(t, fh)

            at1 = t.commit(zf, {2:'c1', 3:'d1'})
            at2 = t.commit(zf, {2:'c2'})

            wconn = t.wc.connect(at1)
            defer(wconn.close)

            fh = wconn.open(zf._p_oid)
            defer(fh.close)

            # create mmap with 1 block beyond file size
            m1 = fh.mmap(2, 3)
            defer(m1.unmap)

            assert m1.blk_start == 2
            assert m1.blk_stop  == 5
            assert len(m1.mem)  == 3*zf.blksize

            tm1 = tMapping(t, m1)

            assert pinned(fh) == {}

            # verify initial data reads
            tm1.assertBlk(2, 'c1',  {2:at1})
            tm1.assertBlk(3, 'd1',  {2:at1})
            tm1.assertBlk(4, '',    {2:at1})

            # commit with growing file size -> verify data read as the same, #3 pinned.
            # (#4 is not yet pinned because it was not accessed)
            at3 = t.commit(zf, {3:'d3', 4:'e3'})
            assert pinned(fh) == {2:at1}
            tm1.assertBlk(2, 'c1',  {2:at1})
            tm1.assertBlk(3, 'd1',  {2:at1, 3:at1})
            tm1.assertBlk(4, '',    {2:at1, 3:at1})

            # resync at1 -> at2:    #2 must unpin to @head; #4 must stay as zero
            wconn.resync(at2)
            assert pinned(fh) == {3:at1}
            tm1.assertBlk(2, 'c2',  {       3:at1})
            tm1.assertBlk(3, 'd1',  {       3:at1})
    >       tm1.assertBlk(4, '',    {       3:at1,  4:at0})     # XXX at0->ø ?

    wcfs/client/client_test.py:158:
    _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
    wcfs/client/client_test.py:86: in assertBlk
        _ = read_exfault_withgil(blkview[0:1])
    wcfs/internal/wcfs_test.pyx:90: in wendelin.wcfs.internal.wcfs_test.read_exfault_withgil
        return _read_exfault(mem, withgil=True)
    _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

    >   raise SegmentationFault()
    E   SegmentationFault

    wcfs/internal/wcfs_test.pyx:120: SegmentationFault
    ------------------ Captured log call -------------------
    INFO     wcfs:__init__.py:293 starting for zeo://localhost:22854 ...
    INFO     wcfs:__init__.py:334 started pid102541 @ /dev/shm/wcfs/c818c147676f8d6f3b408b02f727aca5e3229e98
    INFO     wcfs:__init__.py:400 unmount/stop wcfs pid102541 @ /dev/shm/wcfs/c818c147676f8d6f3b408b02f727aca5e3229e98

Here wcfs.go should have exited due to either unmount request, _or_
SIGTERM.

If first unmount fails, e.g. due to "device or resource is busy", we are
trying to unmount the filesystem the second time after force
kill/FUSE-abort (see 5f684a49 "wcfs: Server.stop: Make sure to remove
mount entry even if we had to use FUSE abort").

This way the caller of Server.stop should get an error only if that
second unmount fails, not on unmount-1 error, which should be considered
as internal to Server.stop implementation.

If we don't hide that unmount-1 error and raise it to the caller, from
outside it can confusingly look like "the server is successfully
stopped, but nevertheless we are raised with an error".