We need to drop client-specific options so that NEO URI that only differ
due to client options while actually pointing to the same NEO server
are equal after normalization.

--------
kirr: See nexedi/neoppod!18 for
the discussion on this subject.

/reviewed-by @kirr
/reviewed-on nexedi/wendelin.core!28

NEO/go and NEO/py URI format diverged over time:

- neo@8c974485

However with nexedi/neoppod!21 a
common solution was found. With neo!7 NEO/go and NEO/py
URI formats are in sync again. We therefore now need to update
'wendelin.core' to support the finally agreed on URI format.

/reviewed-by @kirr
/reviewed-on nexedi/wendelin.core!28

With kirr/neo@95572d6a we synchronized
NEO/go URI format with NEO/py URI format. We need this new
NEO/go version to apply this synchronization to 'wendelin.core'
ZODB tools (what we'll do in the next patches).

/reviewed-by @kirr
/reviewed-on nexedi/wendelin.core!28

This semantically reverts 99f262dd (bigfile/zodb: Make auto format the
default) for wendelin.core-1 mode because in non-WCFS mode there are
known problems with data corruption on BTree topology changes(*) and
auto mode actually does change those topologies with first setting
ZBigFile[blk] -> ZBlk1 and then updating the same block to point to
ZBlk0 object.

Avoid pressuring those problems and use auto as default only in WCFS
mode that should handle invalidations with all those BTree topology
changes well.

The patch is based on suggestion by Levin Zimmermann: nexedi/wendelin.core!20 (comment 212405)

We have to move _default_use_wcfs because now it is invoked at module
import time and needs to be already defined at the time of the call.

(*) see nexedi/wendelin.core@8c32c9f6 for details.

/reviewed-by @levin.zimmermann
/reviewed-on nexedi/wendelin.core!29

Strings cannot be directly hashed without encoding them first, or
an error will be raised:

```python
______________________________ test_zsync_resync _______________________________

    @func
    def test_zsync_resync():
        zstor = testdb.getZODBStorage()
        defer(zstor.close)

>       db, zconn, wconn = _zsync_setup(zstor)

wcfs/client/_wczsync_test.py:112:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
../../venvs/wendelin.core/lib/python3.9/site-packages/decorator.py:232: in fun
    return caller(func, *(extras + args), **kw)
../pygolang/golang/__init__.py:125: in _
    return f(*argv, **kw)
wcfs/client/_wczsync_test.py:53: in _zsync_setup
    wc = wcfs.join(zurl)
wcfs/__init__.py:201: in join
    mntpt = _mntpt_4zurl(zurl)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

zurl = 'file:///srv/slapgrid/slappart66/tmp/testdb_fs.xstpbg49/1.fs'

    def _mntpt_4zurl(zurl):
        # normalize zurl so that even if we have e.g. two neos:// urls coming
        # with different paths to ssl keys, or with different order in the list of
        # masters, we still have them associated with the same wcfs mountpoint.
        zurl = zurl_normalize_main(zurl)

        m = hashlib.sha1()
>       m.update(zurl)
E       TypeError: Strings must be encoded before hashing
```

We fix this error by encoding the string as UTF8 before hashing it.

--------
kirr:

Use b instead of doing

    if isinstance(zurl, six.text_type):
      zurl = zurl.encode("utf-8")

wcfs already takes this approach of using b in other places - for
example in tDB.change:

    # change schedules zf to be changed according to changeDelta at commit.
    #
    # changeDelta: {} blk -> data.
    # data can be both bytes and unicode.              <-- NOTE
    def change(t, zf, changeDelta):
        assert isinstance(zf, ZBigFile)
        zfDelta = t._changed.setdefault(zf, {})
        for blk, data in six.iteritems(changeDelta):
            data = b(data)                             <-- NOTE
            ...

/reviewed-by @kirr
/reviewed-on nexedi/wendelin.core!27

Some modules and methods have changed names in Python 3.
The `thread` module has been renamed to `_thread` and the old name
gives error when run on Python 3:

```python
Traceback:
/opt/slapgrid/b0df76c24a1d2728ccf3e276f07c1790/parts/python3/lib/python3.9/importlib/__init__.py:127: in import_module
    return _bootstrap._gcd_import(name[level:], package, level)
wcfs/client/client_test.py:32: in <module>
    from wendelin.wcfs.wcfs_test import tDB, tAt, timeout, eprint
wcfs/wcfs_test.py:44: in <module>
    from thread import get_ident as gettid
E   ModuleNotFoundError: No module named 'thread'
```

In a similar vein, the `items` method of dictionaries plays the same
role as the old `iteritems`.

We use the `six` module to paper over these differences.

/reviewed-by @kirr
/reviewed-on nexedi/wendelin.core!27

The builtin `zip` in Python 3 returns an iterator, not a list.
Thus, one cannot directly use the `len` method on the object returned
by `zip`, or we will have errors like the following one:

```python
Traceback (most recent call last):
  File "/srv/slapgrid/slappart66/git/wendelin.core/wcfs/internal/xbtree/xbtreetest/treegen.py", line 617, in <module>
    main()
  File "/srv/slapgrid/slappart66/git/wendelin.core/wcfs/internal/xbtree/xbtreetest/treegen.py", line 613, in main
    cmd(argv)
  File "/srv/slapgrid/slappart66/venvs/wendelin.core/lib/python3.9/site-packages/decorator.py", line 232, in fun
    return caller(func, *(extras + args), **kw)
  File "/srv/slapgrid/slappart66/git/pygolang/golang/__init__.py", line 125, in _
    return f(*argv, **kw)
  File "/srv/slapgrid/slappart66/git/wendelin.core/wcfs/internal/xbtree/xbtreetest/treegen.py", line 589, in cmd_trees
    TreesSrv(zstor, r)
  File "/srv/slapgrid/slappart66/venvs/wendelin.core/lib/python3.9/site-packages/decorator.py", line 232, in fun
    return caller(func, *(extras + args), **kw)
  File "/srv/slapgrid/slappart66/git/pygolang/golang/__init__.py", line 125, in _
    return f(*argv, **kw)
  File "/srv/slapgrid/slappart66/git/wendelin.core/wcfs/internal/xbtree/xbtreetest/treegen.py", line 234, in TreesSrv
    treetxtPrev = zctx.ztreetxt(ztree)
  File "/srv/slapgrid/slappart66/venvs/wendelin.core/lib/python3.9/site-packages/decorator.py", line 232, in fun
    return caller(func, *(extras + args), **kw)
  File "/srv/slapgrid/slappart66/git/pygolang/golang/__init__.py", line 125, in _
    return f(*argv, **kw)
  File "/srv/slapgrid/slappart66/git/wendelin.core/wcfs/internal/xbtree/xbtreetest/treegen.py", line 536, in ztreetxt
    return zctx.TopoEncode(xbtree.StructureOf(ztree))
  File "/srv/slapgrid/slappart66/venvs/wendelin.core/lib/python3.9/site-packages/decorator.py", line 232, in fun
    return caller(func, *(extras + args), **kw)
  File "/srv/slapgrid/slappart66/git/pygolang/golang/__init__.py", line 125, in _
    return f(*argv, **kw)
  File "/srv/slapgrid/slappart66/git/wendelin.core/wcfs/internal/xbtree/xbtreetest/treegen.py", line 542, in TopoEncode
    return xbtree.TopoEncode(tree, zctx.vencode)
  File "/srv/slapgrid/slappart66/git/wendelin.core/wcfs/internal/xbtree.py", line 797, in TopoEncode
    for nodev in _walkBFS(tree):
  File "/srv/slapgrid/slappart66/git/wendelin.core/wcfs/internal/xbtree.py", line 701, in _walkBFS
    for level in __walkBFS(tree):
  File "/srv/slapgrid/slappart66/git/wendelin.core/wcfs/internal/xbtree.py", line 724, in __walkBFS
    assert len(rv) == len(rn.node.children)
TypeError: object of type 'zip' has no len()
```

Thus, we have to create a list from the result of `zip` before calling
`len` on it.

--------
kirr:

There were only two places where zip was used to build a list. All other
places where zip is used - both in wcfs/xbtree and in other packages -
are calling zip to iterate over zip result:

    (py39.venv) kirr@deca:~/src/wendelin/wendelin.core$ git grep -w zip
    bigarray/__init__.py:        for n, s in zip(self.shape, self.stridev):
    bigarray/__init__.py:        for n, s in zip(a.shape, a.strides):
    bigarray/array_zodb.py:BigArray_defaults = dict(zip(reversed(_.args), reversed(_.defaults)))
    wcfs/internal/xbtree.py:            for i, (klo, khi) in enumerate(zip(v[:-1], v[1:])): # (klo, khi) = [] of (k_i, k_{i+1})
    wcfs/internal/xbtree.py:                kvv = ['%s:%s' % (k,v) for (k,v) in zip(b.keyv, b.valuev)]
    wcfs/internal/xbtree.py:        for (j,i) in zip(jv, iv):
    wcfs/internal/xbtree.py:                    for (child, k) in zip(node.children[1:], node.keyv):
    wcfs/internal/xbtree.py:                    for (k,v) in zip(node.keyv, node.valuev):
    wcfs/internal/xbtree.py:            for (xlo, xhi) in zip(ksplitv[:-1], ksplitv[1:]): # (klo, s1), (s1, s2), ..., (sN, khi)
    wcfs/internal/xbtree.py:            for (xlo, xhi) in zip(ksplitv[:-1], ksplitv[1:]): # (klo, s1), (s1, s2), ..., (sN, khi)
    wcfs/internal/xbtree.py:                                    for (k,vtxt) in zip(node.keyv, vtxtv)])
    wcfs/internal/xbtree/xbtreetest/treegen.py:                    for (k,v) in zip(node.keyv, node.valuev):
    wcfs/internal/xbtree_test.py:    for (child, childOK) in zip(kids, children):
    wcfs/internal/xbtree_test.py:        for (i,(k,v)) in enumerate(zip(keys, values)):

    # handled in hereby patch
    wcfs/internal/xbtree.py:                rv = list(zip(v[:-1], v[1:]))  # (klo,k1), (k1,k2), ..., (kN,khi)
    wcfs/internal/xbtree.py:                rv = list(zip(v[:-1], v[1:]))  # (klo,k1), (k1,k2), ..., (kN,khi)

/reviewed-by @kirr
/reviewed-on nexedi/wendelin.core!27

`numpy.object` was an alias for the builtin `object`, so we can use
`object` instead:

```python
_________________________ test_bigarray_noobject[tRAM] _________________________

testbig = <bigarray.tests.test_basic.tRAM object at 0x7f6d114ead60>

    def test_bigarray_noobject(testbig):
        Zh = testbig.fopen()

        # NOTE str & unicode are fixed-size types - if size is not explicitly given
        # it will become S0 or U0
>       obj_dtypev = [numpy.object, 'O', 'i4, O', [('x', 'i4'), ('y', 'i4, O')]]

bigarray/tests/test_basic.py:110:
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

attr = 'object'

    def __getattr__(attr):
        # Warn for expired attributes, and return a dummy function
        # that always raises an exception.
        import warnings
        import math
        try:
            msg = __expired_functions__[attr]
        except KeyError:
            pass
        else:
            warnings.warn(msg, DeprecationWarning, stacklevel=2)

            def _expired(*args, **kwds):
                raise RuntimeError(msg)

            return _expired

        # Emit warnings for deprecated attributes
        try:
            val, msg = __deprecated_attrs__[attr]
        except KeyError:
            pass
        else:
            warnings.warn(msg, DeprecationWarning, stacklevel=2)
            return val

        if attr in __future_scalars__:
            # And future warnings for those that will change, but also give
            # the AttributeError
            warnings.warn(
                f"In the future `np.{attr}` will be defined as the "
                "corresponding NumPy scalar.", FutureWarning, stacklevel=2)

        if attr in __former_attrs__:
>           raise AttributeError(__former_attrs__[attr])
E           AttributeError: module 'numpy' has no attribute 'object'.
E           `np.object` was a deprecated alias for the builtin `object`. To avoid this error in existing code, use `object` by itself. Doing this will not modify any behavior and is safe.
E           The aliases was originally deprecated in NumPy 1.20; for more details and guidance see the original release note at:
E               https://numpy.org/devdocs/release/1.20.0-notes.html#deprecations
```

--------
kirr:

On py2:

    In [1]: import numpy

    In [2]: numpy.__version__
    Out[2]: '1.16.6'

    In [3]: numpy.object
    Out[3]: object

    In [4]: numpy.object is object
    Out[4]: True

this change is, thus, indeed safe to make.

/reviewed-by @kirr
/reviewed-on nexedi/wendelin.core!27

NEO is still not ported to Python 3.
Importing NEO globally thus makes pytest tests fail during the
assert-rewritting step:
```python
../../venvs/wendelin.core/lib/python3.9/site-packages/_pytest/assertion/rewrite.py:178: in exec_module
    exec(co, module.__dict__)
lib/tests/test_zodb.py:36: in <module>
    from neo.client.Storage import Storage as NEOStorage
../neoppod/neo/client/__init__.py:52: in <module>
    from . import app # set up signal handlers early enough to do it in the main thread
E     File "/srv/slapgrid/slappart66/git/neoppod/neo/client/app.py", line 356
E       except NEOStorageReadRetry, e:
E                                 ^
E   SyntaxError: invalid syntax
```

A MR adding enough support to not fail at import time is proposed in
nexedi/neoppod!24 .
However, that MR will not be reviewed until the vacation period is over.

In the meantime, and as a previous step to make running NEO tests
optional, the import has been moved inside the function loading NEO.
Thus, only the tests that require NEO will fail.

--------
kirr:

Add TODO to revert to import NEO globally after lab.nexedi.com/nexedi/neoppod/-/merge_requests/24 is landed.

/reviewed-by @kirr
/reviewed-on nexedi/wendelin.core!27

`ZEO[test]` should be installed when testing, so that `zope.testing` is
installed.
Otherwise, an import error may be raised when running the test if
`zope.testing` has not been manually installed.

--------
kirr:

Adjust tox.ini to no longer install zope.testing explicitly since we are
now requesting ZEO[test] under our own tests extra, and tox.ini installs
.[test] as the primary package.

/reviewed-by @kirr
/reviewed-on nexedi/wendelin.core!27

Because of the way wendelin.core organizes its in-tree python importing
redirector (see wendelin.py) it is possible to import the same module
twice with python thinking it is importing two different modules. For
example when installed in develop mode python resolves the following
imports to the same bigfile/__init__.py

    import wendelin.bigfile
    import bigfile

but tries to load that module twice and independently. Which leads to
virtmem DSO, linked to from under bigfile/_bigfile extension, being
initialized twice and complaining about that because only single gil
hook should be requested to be installed:

    (py39.venv) kirr@deca:~/src/wendelin/wendelin.core$ python
    Python 3.9.19+ (heads/3.9:40d77b93672, Apr 12 2024, 06:40:05)
    [GCC 12.2.0] on linux
    Type "help", "copyright", "credits" or "license" for more information.
    >>> import wendelin.bigfile
    >>> import bigfile
    python: bigfile/virtmem.c:106: virt_lock_hookgil: Assertion `!(virtmem_gilhooks)' failed.
    Аварийный останов

This problem was there from day 1, but it was not creating issues in
practice because wendelin.core users do `import wendelin...` and there
was also no problem with running pytest in the source tree.

However with py39 and pytest8 we see that running pytest somehow started
to unconditionally import things from under two namespaces which leads
to inability to run tests even when instructing pytest to collect them
via python-modules namespace instead of filesystem:

    (py39.venv) kirr@deca:~/src/wendelin/wendelin.core$ pytest -vsx --pyargs wendelin.bigfile.tests.test_basic
    ======================== test session starts ========================
    platform linux -- Python 3.9.19+, pytest-8.2.2, pluggy-1.5.0 -- /home/kirr/src/wendelin/venv/py39.venv/bin/python3.9
    cachedir: .pytest_cache
    rootdir: /home/kirr/src/wendelin/wendelin.core
    configfile: pyproject.toml
    collecting ... python3.9: bigfile/virtmem.c:106: virt_lock_hookgil: Assertion `!(virtmem_gilhooks)' failed.
    Fatal Python error: Aborted

    Current thread 0x00007fa172a60740 (most recent call first):
      File "<frozen importlib._bootstrap>", line 228 in _call_with_frames_removed
      File "<frozen importlib._bootstrap_external>", line 1173 in create_module
      File "<frozen importlib._bootstrap>", line 565 in module_from_spec
      File "<frozen importlib._bootstrap>", line 666 in _load_unlocked
      File "<frozen importlib._bootstrap>", line 986 in _find_and_load_unlocked
      File "<frozen importlib._bootstrap>", line 1007 in _find_and_load
      File "/home/kirr/src/wendelin/wendelin.core/bigfile/__init__.py", line 31 in <module>
      File "<frozen importlib._bootstrap>", line 228 in _call_with_frames_removed
      File "<frozen importlib._bootstrap_external>", line 850 in exec_module
      File "<frozen importlib._bootstrap>", line 680 in _load_unlocked
      File "<frozen importlib._bootstrap>", line 986 in _find_and_load_unlocked
      File "<frozen importlib._bootstrap>", line 1007 in _find_and_load
      File "<frozen importlib._bootstrap>", line 1030 in _gcd_import
      File "<frozen importlib._bootstrap>", line 228 in _call_with_frames_removed
      File "<frozen importlib._bootstrap>", line 972 in _find_and_load_unlocked
      File "<frozen importlib._bootstrap>", line 1007 in _find_and_load
      File "<frozen importlib._bootstrap>", line 1030 in _gcd_import
      File "<frozen importlib._bootstrap>", line 228 in _call_with_frames_removed
      File "<frozen importlib._bootstrap>", line 972 in _find_and_load_unlocked
      File "<frozen importlib._bootstrap>", line 1007 in _find_and_load
      File "<frozen importlib._bootstrap>", line 1030 in _gcd_import
      File "/home/kirr/local/py3.9/lib/python3.9/importlib/__init__.py", line 127 in import_module
      File "/home/kirr/src/wendelin/venv/py39.venv/lib/python3.9/site-packages/_pytest/pathlib.py", line 591 in import_path
      File "/home/kirr/src/wendelin/venv/py39.venv/lib/python3.9/site-packages/_pytest/python.py", line 492 in importtestmodule
      ...
      File "/home/kirr/src/wendelin/venv/py39.venv/lib/python3.9/site-packages/_pytest/runner.py", line 567 in collect_one_node
      File "/home/kirr/src/wendelin/venv/py39.venv/lib/python3.9/site-packages/_pytest/main.py", line 837 in _collect_one_node
      File "/home/kirr/src/wendelin/venv/py39.venv/lib/python3.9/site-packages/_pytest/main.py", line 974 in genitems
      File "/home/kirr/src/wendelin/venv/py39.venv/lib/python3.9/site-packages/_pytest/main.py", line 811 in perform_collect
      File "/home/kirr/src/wendelin/venv/py39.venv/lib/python3.9/site-packages/_pytest/main.py", line 349 in pytest_collection
      ...
      File "/home/kirr/src/wendelin/venv/py39.venv/lib/python3.9/site-packages/_pytest/config/__init__.py", line 178 in main
      File "/home/kirr/src/wendelin/venv/py39.venv/lib/python3.9/site-packages/_pytest/config/__init__.py", line 206 in console_main
      File "/home/kirr/src/wendelin/venv/py39.venv/bin/pytest", line 8 in <module>
    Аварийный останов (образ памяти сброшен на диск)

This happens because wendelin.bigfile is importing
wendelin.bigfile._bigfile as `from ._bigfile import ...` which under
pytest leads to importing both wendelin.bigfile._bigfile and
bigfile._bigfile and further conflicting when setting up GIL hooks.

-> Fix this issue by avoiding relative imports and always referring to
   wendelin.core modules with `wendelin.` prefix.

The list of places where relative imports were used was small and found via

    $ git grep -w import |grep '\s\.'
    bigfile/__init__.py:from ._bigfile import BigFile, WRITEOUT_STORE, WRITEOUT_MARKSTORED, ram_reclaim
    wcfs/__init__.py:from .client._wcfs import \

Everywhere else we were already importing things from under wendelin
namespace via fully specified module path.

After the fix both

    $ pytest -vsx --pyargs wendelin.bigfile.tests.test_basic

and

    $ pytest -vsx bigfile/tests/test_basic.py

start to work ok from inside the worktree.

/reported-and-tested-by @vnmabus
/reviewed-by @levin.zimmermann
/reviewed-on nexedi/wendelin.core!26

When building an editable wheel it is not necessary that
`build_packages` (or even `run`) is called before calling `get_outputs`
(notice the following in
https://setuptools.pypa.io/en/latest/userguide/extension.html#supporting-sdists-and-editable-installs-in-build-sub-commands :
"Please note that custom sub-commands SHOULD NOT rely on `run()` being
executed (or not) to provide correct return values for `get_outputs()`,
`get_output_mapping()` or `get_source_files()`. The `get_*` methods
should work independently of `run().").

Our implementation relied in the call to `build_packages` to set the
name of the synthetic init file.
This commit uses a property of the object instead, to compute that name
whenever it is necessary.
With this change, it is now possible to make editable wheels.

--------
kirr:

Without the fix `pip install -e` fails as follows on py3:

  Traceback (most recent call last):
    File "/home/kirr/src/wendelin/venv/py39.venv/lib/python3.9/site-packages/setuptools/command/editable_wheel.py", line 155, in run
      self._create_wheel_file(bdist_wheel)
    File "/home/kirr/src/wendelin/venv/py39.venv/lib/python3.9/site-packages/setuptools/command/editable_wheel.py", line 357, in _create_wheel_file
      files, mapping = self._run_build_commands(dist_name, unpacked, lib, tmp)
    File "/home/kirr/src/wendelin/venv/py39.venv/lib/python3.9/site-packages/setuptools/command/editable_wheel.py", line 281, in _run_build_commands
      files, mapping = self._collect_build_outputs()
    File "/home/kirr/src/wendelin/venv/py39.venv/lib/python3.9/site-packages/setuptools/command/editable_wheel.py", line 266, in _collect_build_outputs
      files.extend(cmd.get_outputs() or [])
    File "<string>", line 137, in get_outputs
    File "/home/kirr/src/wendelin/venv/py39.venv/lib/python3.9/site-packages/setuptools/command/build_py.py", line 78, in __getattr__
      return orig.build_py.__getattr__(self, attr)
    File "/home/kirr/src/wendelin/venv/py39.venv/lib/python3.9/site-packages/setuptools/_distutils/cmd.py", line 107, in __getattr__
      raise AttributeError(attr)
  AttributeError: initfile

/reviewed-by @kirr
/reviewed-on nexedi/wendelin.core!25

The interface of the function `search_include_directories` has changed
in Cython 3.0a7 in https://github.com/cython/cython/commit/f3f7b612.
This updates the replacement used by wendelin so that it works for
both newer and older versions.

Note that wendelin.core still does not work with Cython >= 3, as that
version refuses to compile Python functions that can throw C++
exceptions (apparently, mixing C++ exceptions and Cython-generated
code is not considered safe).

/reviewed-by @kirr
/reviewed-on !24

NEO is still not ported to Python 3, so Python 3 tests should not use this backend.

/reviewed-by @kirr
/reviewed-on !24

If a user doesn't explicitly declare a ZBlk format, it can be assumed
that this user wants to have the best ratio between consumed storage space
and data access speed. Currently the best ratio between these two is
provided by the new 'auto' (heuristic) format. In case of small appends this
format helps reducing storage space, and in any other case it just
behaves like ZBlk0 [1]. Therefore this default ensures a fast access speed [2],
but also avoids a massive data growth in case of many small appends [3].

[1] An exception to this is: in its current implementation a block
behaves like ZBlk1 (slow access) in case it isn't fully filled up yet.

[2] As this was stated as a reason why ZBlk1 as a default format was
reverted in nexedi/wendelin.core@0b68f178.

[3] This was perhaps the reason why ZBlk1 was set to be the default format
in nexedi/wendelin.core@9ae42085. The massive
storage space consumption can already be a problem with few array to
which regularly small data is appended to, as it can easily happen with
Wendelin development instances.

/reviewed-by @kirr
/reviewed-on nexedi/wendelin.core!20

There are two formats to save data with a ZBigFile: ZBlk0 and ZBlk1.
They differ by adjusting the ratio between access-time and growing
disk-space, where ZBlk1 is better regarding to disk space, while ZBlk0
has a better access-time. Wendelin.core users may not always know yet or
care which format fits better for their data. In this case it may be
easier for users to just let the program automatically select the ZBlk
format. With this patch and the new 'auto' (for heuristic) option of the
'ZBlk' argument of ZBigFile, this is now possible. The 'auto' option isn't
really a new ZBlk format in itself, but it just tries to automatically
select the best ZBlk format option according to the characteristics
of the changes that the user applies to the ZBigFile.

In its current implementation, the heuristic tackles the use-case of
large arrays with many small append-only changes. In this case 'auto' is
smaller in space than ZBlk0, but faster to read than ZBlk1. It does so,
by initially using ZBlk1 until a blk is filled up. Once a blk is full,
it switches to ZBlk1, as it was recommended by @kirr in
nexedi/wendelin.core!20 (comment 196084).

With this patch comes a test (bigfile/tests/bench_zblkfmt) that creates
benchmarks for different combinations and zblk formats. The test aims
to check how the 'heuristic' format performs in contrast to 'ZBlk0'
and 'ZBlk1':

    BenchmarkAppendSize/zblk=ZBlk0/change_count=500/change_percentage_set=[0.014]   1       538.1 MB
    BenchmarkAppendRandRead/zblk=ZBlk0/change_count=500/change_percentage_set=[0.014]       6 2.085 ms/blk
    BenchmarkAppendSize/zblk=ZBlk1/change_count=500/change_percentage_set=[0.014]   1       16.8 MB
    BenchmarkAppendRandRead/zblk=ZBlk1/change_count=500/change_percentage_set=[0.014]       6 14.564 ms/blk
    BenchmarkAppendSize/zblk=auto/change_count=500/change_percentage_set=[0.014]    1       29.4 MB
    BenchmarkAppendRandRead/zblk=auto/change_count=500/change_percentage_set=[0.014]        6 2.119 ms/blk
    BenchmarkRandWriteSize/zblk=ZBlk0/arrsize=1000000/change_count=500/change_percentage_set=[0.2]  1       1021.1 MB
    BenchmarkRandWriteRandRead/zblk=ZBlk0/arrsize=1000000/change_count=500/change_percentage_set=[0.2]      3 2.324 ms/blk
    BenchmarkRandWriteSize/zblk=ZBlk1/arrsize=1000000/change_count=500/change_percentage_set=[0.2]  1       216.2 MB
    BenchmarkRandWriteRandRead/zblk=ZBlk1/arrsize=1000000/change_count=500/change_percentage_set=[0.2]      3 15.317 ms/blk
    BenchmarkRandWriteSize/zblk=auto/arrsize=1000000/change_count=500/change_percentage_set=[0.2]   1       219.8 MB
    BenchmarkRandWriteRandRead/zblk=auto/arrsize=1000000/change_count=500/change_percentage_set=[0.2]       3 14.027 ms/blk
    BenchmarkRandWriteSize/zblk=ZBlk0/arrsize=1000000/change_count=500/change_percentage_set=[1]    1       1048.6 MB
    BenchmarkRandWriteRandRead/zblk=ZBlk0/arrsize=1000000/change_count=500/change_percentage_set=[1]        3 2.126 ms/blk
    BenchmarkRandWriteSize/zblk=ZBlk1/arrsize=1000000/change_count=500/change_percentage_set=[1]    1       1070.4 MB
    BenchmarkRandWriteRandRead/zblk=ZBlk1/arrsize=1000000/change_count=500/change_percentage_set=[1]        3 14.284 ms/blk
    BenchmarkRandWriteSize/zblk=auto/arrsize=1000000/change_count=500/change_percentage_set=[1]     1       1070.3 MB
    BenchmarkRandWriteRandRead/zblk=auto/arrsize=1000000/change_count=500/change_percentage_set=[1] 3 14.072 ms/blk
    BenchmarkRandWriteSize/zblk=ZBlk0/arrsize=1000000/change_count=500/change_percentage_set=[0.2,1]        1       1046.4 MB
    BenchmarkRandWriteRandRead/zblk=ZBlk0/arrsize=1000000/change_count=500/change_percentage_set=[0.2,1]    3 2.137 ms/blk
    BenchmarkRandWriteSize/zblk=ZBlk1/arrsize=1000000/change_count=500/change_percentage_set=[0.2,1]        1       638.2 MB
    BenchmarkRandWriteRandRead/zblk=ZBlk1/arrsize=1000000/change_count=500/change_percentage_set=[0.2,1]    3 14.083 ms/blk
    BenchmarkRandWriteSize/zblk=auto/arrsize=1000000/change_count=500/change_percentage_set=[0.2,1] 1       639.5 MB
    BenchmarkRandWriteRandRead/zblk=auto/arrsize=1000000/change_count=500/change_percentage_set=[0.2,1]     3 13.937 ms/blk

and post-processed with benchstat from 3 such runs:

                                                                                            │     x.log     │
                                                                                            │       B       │
    AppendSize/zblk=ZBlk0/change_count=500/change_percentage_set=[0.014]                       513.2Mi ± 0%
    AppendSize/zblk=ZBlk1/change_count=500/change_percentage_set=[0.014]                       16.02Mi ± 0%
    AppendSize/zblk=auto/change_count=500/change_percentage_set=[0.014]                        28.04Mi ± 0%
    RandWriteSize/zblk=ZBlk0/arrsize=1000000/change_count=500/change_percentage_set=[0.2]      973.8Mi ± 0%
    RandWriteSize/zblk=ZBlk1/arrsize=1000000/change_count=500/change_percentage_set=[0.2]      206.2Mi ± 0%
    RandWriteSize/zblk=auto/arrsize=1000000/change_count=500/change_percentage_set=[0.2]       209.6Mi ± 0%
    RandWriteSize/zblk=ZBlk0/arrsize=1000000/change_count=500/change_percentage_set=[1]       1000.0Mi ± 0%
    RandWriteSize/zblk=ZBlk1/arrsize=1000000/change_count=500/change_percentage_set=[1]       1020.8Mi ± 0%
    RandWriteSize/zblk=auto/arrsize=1000000/change_count=500/change_percentage_set=[1]        1020.7Mi ± 0%
    RandWriteSize/zblk=ZBlk0/arrsize=1000000/change_count=500/change_percentage_set=[0.2,1]    997.9Mi ± 0%
    RandWriteSize/zblk=ZBlk1/arrsize=1000000/change_count=500/change_percentage_set=[0.2,1]    608.6Mi ± 0%
    RandWriteSize/zblk=auto/arrsize=1000000/change_count=500/change_percentage_set=[0.2,1]     609.9Mi ± 0%
    geomean                                                                                    353.0Mi

                                                                                                │    x.log    │
                                                                                                │   ms/blk    │
    AppendRandRead/zblk=ZBlk0/change_count=500/change_percentage_set=[0.014]                      2.094 ± 12%
    AppendRandRead/zblk=ZBlk1/change_count=500/change_percentage_set=[0.014]                      14.47 ±  1%
    AppendRandRead/zblk=auto/change_count=500/change_percentage_set=[0.014]                       2.168 ±  2%
    RandWriteRandRead/zblk=ZBlk0/arrsize=1000000/change_count=500/change_percentage_set=[0.2]     2.324 ±  1%
    RandWriteRandRead/zblk=ZBlk1/arrsize=1000000/change_count=500/change_percentage_set=[0.2]     13.73 ± 12%
    RandWriteRandRead/zblk=auto/arrsize=1000000/change_count=500/change_percentage_set=[0.2]      13.60 ±  3%
    RandWriteRandRead/zblk=ZBlk0/arrsize=1000000/change_count=500/change_percentage_set=[1]       2.125 ±  2%
    RandWriteRandRead/zblk=ZBlk1/arrsize=1000000/change_count=500/change_percentage_set=[1]       14.18 ±  3%
    RandWriteRandRead/zblk=auto/arrsize=1000000/change_count=500/change_percentage_set=[1]        14.17 ±  1%
    RandWriteRandRead/zblk=ZBlk0/arrsize=1000000/change_count=500/change_percentage_set=[0.2,1]   2.118 ±  1%
    RandWriteRandRead/zblk=ZBlk1/arrsize=1000000/change_count=500/change_percentage_set=[0.2,1]   13.85 ±  2%
    RandWriteRandRead/zblk=auto/arrsize=1000000/change_count=500/change_percentage_set=[0.2,1]    13.80 ±  1%
    geomean                                                                                       6.423

See nexedi/wendelin.core!20 and
kirr/wendelin.core@da765ef7...0c6f0850 for the
preliminary history of this patch.
Co-authored-by: Kirill Smelkov <kirr@nexedi.com>

Fix typo.

This is utility function that we will need to use in the next patch to
see how data of two blocks are similar to each other.

We use numpy for the implementation because this code will be hot and if we
don't use optimized C routines writeout will become very slow.

Quoting draft patch kirr/wendelin.core@3f631932 :

    -> Also optimize ndelta computation - when done in plain python just
       this part was taking a lot of time as timing for initial writeup
       showed:

         writeup with ZBlk0: ~20-25s
         writeup with ZBlk1: ~20-30s
         writeup with auto:  was ~ 120s

       now, after switching to numpy for ndelta computation, whole runtime
       with 'auto' is taking ~ 35s. The whole runtime, if I observe
       benchmark execution correctly, is dominated by database writeup.

/reviewed-by @levin.zimmermann
/reviewed-on nexedi/wendelin.core!20

3636242f does not talk about go-fuse, which is wcfs's direct dependency
and was actually updated by upstream:

kirr/go-fuse@9f9ad4a1

-> Update it as well.

Update all dependencies of WCFS to their recent versions:

- neo/go: Update to pick up support for NEO/go to handle multiple master nodes
- go123: Add support for Go1.21

The following dependencies were updated, but depend on higher go
versions than supported by wendelin.core

- glog: v1.1.0 needs go 1.19, but we still support go 1.18

The following dependencies were not updated by upstream at all:

- overflow
- og-rek
- errors
- testify

/reviewed-by @kirr
/reviewed-on nexedi/wendelin.core!22

Update all dependencies of WCFS to their recent versions:

- go-fuse: update to pick up https://github.com/hanwen/go-fuse/commit/265a3926
  and https://github.com/hanwen/go-fuse/commit/90b055af. The first patch
  potentially improves performance, while the second fixes support for
  neo:// with multiple masters.
- go123: add support for go1.20
- testify: some bugfixes (we use this package only during tests)

The following dependencies were not updated by upstream at all:

- glog
- overflow
- ogórek
- pkg/errors

.

/reviewed-by @levin.zimmermann
/reviewed-on !16

If a NEO cluster has multiple master nodes, there is no agreed
on order in which the master node addresses appear in the URI.
In order to insure we always get the same normalized URI among different
clients of a NEO cluster with more than one master node, we explicitly
sort the master node address order with this patch.

/reviewed-by @kirr
/reviewed-on nexedi/wendelin.core!17

In the old source code we already filtered NEO URI by dropping
credentials, but we applied this filter to any URI, not only the NEO
one. This patch adds a mechanism to apply various filter according to
the specific storage type. Starting with this new patch,
'zurl_normalize_main' also refuses to normalize an URI with an unknown
scheme.

/reviewed-by @kirr
/reviewed-on !17

After moving zurl filtering to a dedicated function, we can
now test this function for correctness. It's important that different
clients which point to the same storage always result in the same
zodburi, even if their initial user-specified zodburi slightly differs
(e.g. due to different client-side parameters or different paths of encryption).

/reviewed-by @kirr
/reviewed-on !17

The WCFS mountpoint of any ZODB storage must be a unique, persistent,
repeatable hash. This means any client which uses the same storage must
always calculate the same WCFS mountpoint (independent from
client-only parameters etc.). Therefore the WCFS mountpoint calculation
must be robust for all supported ZODB storage types (at least NEO, ZEO,
filestorage).

It was recently decided [1] that in order to provide this robustness, WCFS
mountpoint calculation should filter the parsed URI in order to drop
parts, which prevents the repeatability/persistence across different
clients (e.g. parts which can differ between clients although the same
storage is accessed). In order to make this filtering implementation a
bit easier to read and the wcfs/__init__.py less dense, the first step
is to move the zurl filtering ("normalization") into lib/zodb.py
This also makes sense since this normalization can be regarded as a
general zodb tool which may be useful for other solutions which use
zodburi.

[1] neoppod!18 (comment 184671)

/reviewed-by @kirr
/reviewed-on !17

Kirill noted that fb620301 introduced a regression [1]:
'test_zstor_2zurl' sometimes passes and sometimes fails. The reason for
this is that there is no deterministic order of master nodes in
'NodeManager.getMasterList()', which is why there is no specified
order of master node addresses in a zurl [2]. We don't want to normalize
a zurl returned by 'zstor_2zurl' as we need some of the client-specific
parameters as SSL file paths, so we rather fix the test to allow any
possible order of NEO master nodes in the zurl.

[1] !17 (comment 188102)
[2] https://lab.nexedi.com/nexedi/wendelin.core/blob/fb620301/lib/zodb.py#L414

/reviewed-by @kirr
/reviewed-on !17

The old code raised an explicit exception when converting a NEO storage
with > 1 master nodes into a URI. Perhaps the rationale for this exception
was that there isn't any agreed on order of master nodes in a NEO URI,
which means that building a URI from such a storage could potentially
break the invariant that any client which points to the same storage
should result in the same WCFS mountpoint.
With levin.zimmermann/wendelin.core@6f5196fa we can now rely on
WCFS mountpoint calculation to always return the same mountpoint even if
the order of master node addresses differ. Therefore we can drop this
exception and allow WCFS to support NEO clusters with more than one master.

--------

kirr: support for multiple masters was simply not implemented because in
a05db040 (lib/zodb: Teach zstor_2zurl about ZEO, NEO and Demo storages)
I though that we do not yet actually need it and wanted to have
something minimal first.

I agree that in WCFS context it is ok and makes sense to normalize zurl
to have masters coming in particular order. But at zstor_2zurl level we
rely on the order of masters that app.nm.getMasterList gives us. The
normalization is separate function.

/reviewed-by @kirr
/reviewed-on !17

The function to do it was there, but I missed to add corresponding defer.
Fixes 6f0cdaff (wcfs: Provide isolation to clients).

Update all dependencies of WCFS to their recent versions:

- go123: add support for go1.18 and go1.19
- neo: update to latest draft
- go-fuse: update to pick up https://github.com/hanwen/go-fuse/commit/4a0e6eb5
- ogórek: no change, just the version we already had was released as v1.2.0
- testify: some bugfixes (we use this package only during tests)

The following dependencies were not updated by upstream at all:

- glog
- overflow
- pkg/errors

.

This patch allows using WCFS with a NEO or ZEO storage which is
reachable by a URL which contains an ipv6 host.

Without this patch the following example doesn't work:

>>> from wendelin.lib.zodb import dbopen
>>> root = dbopen("neo://cluster-name@[::1]:2051")
>>> # "abc" points to a ZBigArray
>>> root["abc"][0]

It doesn't work because the parser missed adding square brackets around
ipv6 hosts, due to which unparsing the resulting URL resulted in a wrong
interpretation where a port starts.

This patch furthermore amends 'test_zstor_2zurl' to test ZEO and NEO
storages with ipv6 hosts.

---

/reviewed-by @kirr
/reviewed-on !13

This patch adds comprehensive tests for 'wendelin.lib.zodb.zstor_2zurl'.
Before this patch only one related test existed ('test_zurlstable').
This test only lightly checked correct functionality of 'zstor_2zurl'.
Therefore we added the new tests 'test_zstor_2zurl' and
'test_zurlsamedb'.

The new tests only cover existing functionality.

---

Co-authored-by: kirr

/reviewed-by @kirr
/reviewed-on !13

Before this patch 'zsync(storage)' was effectless for ZEO storages, it
didn't synchronize the client with the server. This patch fixes 'zsync',
so that it also performs synchronization of ZEO clients.

Background information:
=======================

2006 the sync mode of ZEO has been removed:

  ZEO@629b0667

and only async mode was supported from then. This means, that the "sync"
method of ZEO.ClientStorage was in fact effectless. In ZEO 5 the
"server-sync" option has been added:

  https://github.com/zopefoundation/ZEO/pull/63

Setting this option to 'True' makes the 'sync' method performing a
"server round trip, thus causing client to wait for outstanding
invalidations" [1]. In this patch we imitate the effect of this flag
for both ZEO 4 and ZEO 5.

[1] https://github.com/zopefoundation/ZEO/blob/423cb8563be3e1ee0bb4297ee980d9b74f09c710/src/ZEO/ClientStorage.py#L225-L226

---

/reviewed-by @kirr
/reviewed-on !13

The 'shape' argument of 'numpy.ndarray's initialization method accepts
integer and sequences of integers. But the 'shape' property of
'numpy.ndarray' always returns tuple[int, ...], so numpy manually
casts any legal argument into tuple[int, ...].

In 'BigArray' and 'ZBigArray' this internal casting didn't exist yet.
This patch adds the casting.

Before:

  ZBigArray(shape=[1, 2, 3], dtype=float).shape == [1, 2, 3]

After:

  ZBigArray(shape=[1, 2, 3], dtype=float).shape == (1, 2, 3)

In this way BigArray and ZBigArray API behaves closer to numpy.ndaray,
which should help avoiding confusion when people are using BigArray /
ZBigArray.

-----

See issue nexedi/wendelin.core#9 and
MR nexedi/wendelin.core!14
for additional context.

/reviewed-by @kirr
/reviewed-on nexedi/wendelin.core!14

Wendelin.core already supports Python3 relatively well, but demo_zbigarray.py,
that is invoked only manually, was missing compatibility bits for xrange:

    (neo) (py3.venv) (g.env) kirr@deca:~/src/neo/src/lab.nexedi.com/nexedi/wendelin.core$ ./demo/demo_zbigarray.py gen 1.fs
    I: RAM:  15.29GB
    I: WORK: 30.57GB
    gen signal t=0...4.10e+09  float64  (= 30.57GB)
    Traceback (most recent call last):
      File "/home/kirr/src/wendelin/wendelin.core/./demo/demo_zbigarray.py", line 154, in <module>
        main()
      File "/home/kirr/src/wendelin/venv/py3.venv/lib/python3.9/site-packages/decorator.py", line 232, in fun
        return caller(func, *(extras + args), **kw)
      File "/home/kirr/src/tools/go/pygolang/golang/__init__.py", line 103, in _
        return f(*argv, **kw)
      File "/home/kirr/src/wendelin/wendelin.core/./demo/demo_zbigarray.py", line 142, in main
        gen(sig)
      File "/home/kirr/src/wendelin/wendelin.core/./demo/demo_zbigarray.py", line 74, in gen
        for t0 in xrange(0, len(a), blocksize):
    NameError: name 'xrange' is not defined

-> Fix it.

Arnaud reports that wendelin.core currently cannot be installed on
Python3:

    /opt/slapgrid/3f9add9291086dee302fc478df4b3130/parts/python3/bin/python3 /tmp/tmp1fuxchsb -q develop -mN -d /opt/slapgrid/3f9add9291086dee302fc478df4b3130/develop-eggs/tmps5jr7ymsbuild
    /opt/slapgrid/3f9add9291086dee302fc478df4b3130/eggs/setuptools-44.1.1-py3.7.egg/setuptools/dist.py:476: UserWarning: Normalizing '2.0.alpha2.post1' to '2.0a2.post1'
    package init file '__init__.py' not found (or not a regular file)
    Traceback (most recent call last):
     File "/tmp/tmp1fuxchsb", line 19, in <module>
       exec(compile(f.read(), '/opt/slapgrid/3f9add9291086dee302fc478df4b3130/parts/wendelin.core/setup.py', 'exec'))
     File "/opt/slapgrid/3f9add9291086dee302fc478df4b3130/parts/wendelin.core/setup.py", line 426, in <module>
       """.splitlines()]
     File "/opt/slapgrid/3f9add9291086dee302fc478df4b3130/develop-eggs/pygolang-0.1-py3.7-linux-x86_64.egg/golang/pyx/build.py", line 118, in setup
       setuptools_dso.setup(**kw)
     File "/opt/slapgrid/3f9add9291086dee302fc478df4b3130/eggs/setuptools_dso-1.7-py3.7.egg/setuptools_dso/__init__.py", line 37, in setup
       _setup(**kws)
     File "/opt/slapgrid/3f9add9291086dee302fc478df4b3130/eggs/setuptools-44.1.1-py3.7.egg/setuptools/__init__.py", line 162, in setup
     File "/opt/slapgrid/3f9add9291086dee302fc478df4b3130/parts/python3/lib/python3.7/distutils/core.py", line 148, in setup
       dist.run_commands()
     File "/opt/slapgrid/3f9add9291086dee302fc478df4b3130/parts/python3/lib/python3.7/distutils/dist.py", line 966, in run_commands
       self.run_command(cmd)
     File "/opt/slapgrid/3f9add9291086dee302fc478df4b3130/parts/python3/lib/python3.7/distutils/dist.py", line 985, in run_command
       cmd_obj.run()
     File "/opt/slapgrid/3f9add9291086dee302fc478df4b3130/eggs/setuptools-44.1.1-py3.7.egg/setuptools/command/develop.py", line 38, in run
     File "/opt/slapgrid/3f9add9291086dee302fc478df4b3130/eggs/setuptools-44.1.1-py3.7.egg/setuptools/command/develop.py", line 136, in install_for_development
     File "/opt/slapgrid/3f9add9291086dee302fc478df4b3130/parts/python3/lib/python3.7/distutils/cmd.py", line 313, in run_command
       self.distribution.run_command(command)
     File "/opt/slapgrid/3f9add9291086dee302fc478df4b3130/parts/python3/lib/python3.7/distutils/dist.py", line 985, in run_command
       cmd_obj.run()
     File "/opt/slapgrid/3f9add9291086dee302fc478df4b3130/eggs/setuptools-44.1.1-py3.7.egg/setuptools/command/egg_info.py", line 296, in run
     File "/opt/slapgrid/3f9add9291086dee302fc478df4b3130/eggs/setuptools-44.1.1-py3.7.egg/setuptools/command/egg_info.py", line 303, in find_sources
     File "/opt/slapgrid/3f9add9291086dee302fc478df4b3130/eggs/setuptools-44.1.1-py3.7.egg/setuptools/command/egg_info.py", line 537, in run
     File "/opt/slapgrid/3f9add9291086dee302fc478df4b3130/eggs/setuptools-44.1.1-py3.7.egg/setuptools/command/egg_info.py", line 591, in prune_file_list
     File "/opt/slapgrid/3f9add9291086dee302fc478df4b3130/eggs/setuptools-44.1.1-py3.7.egg/setuptools/command/egg_info.py", line 452, in prune
     File "/opt/slapgrid/3f9add9291086dee302fc478df4b3130/eggs/setuptools-44.1.1-py3.7.egg/setuptools/command/egg_info.py", line 405, in _remove_files
    TypeError: cannot use a string pattern on a bytes-like object
    While:
     Installing wendelin.core.

The problem turned out to be that git-lsfiles output, that we add into
list of source files, is bytes and it breaks when those bytes get
intermixed into strings.

-> Fix it by always returning from runcmd the str type of current python.

/reported-by @arnau

Similarly to build_ext we need ccan/config.h to be present for dso to
build. It was not the case and so pip install wendelin.core was failing:

    $ pip install wendelin.core-2.0a2.tar.gz
    Processing ./wendelin.core-2.0a2.tar.gz
      Installing build dependencies ... done
      Getting requirements to build wheel ... done
        Preparing wheel metadata ... done
    Collecting ZODB>=4
    ...
    Building wheels for collected packages: wendelin.core
      Building wheel for wendelin.core (PEP 517) ... error
      ERROR: Command errored out with exit status 1:
      ...
      running build_dso
      Building DSOs
      building 'wendelin.bigfile.libvirtmem' DSO as build/lib.linux-x86_64-2.7/wendelin/bigfile/liblibvirtmem.so
      creating build/temp.linux-x86_64-2.7
      creating build/temp.linux-x86_64-2.7/bigfile
      creating build/temp.linux-x86_64-2.7/lib
      x86_64-linux-gnu-gcc -pthread -fno-strict-aliasing -Wdate-time -D_FORTIFY_SOURCE=2 -g -ffile-prefix-map=/build/python2.7-vgIf7a/python2.7-2.7.18=. -fstack-protector-strong -Wformat -Werror=format-security -fPIC -D_GNU_SOURCE -I/tmp/pip-build-env-lfVr7E/overlay/lib/python2.7/site-packages -I. -I./include -I./3rdparty/ccan -I./3rdparty/include -Ibuild/lib.linux-x86_64-2.7/. -c bigfile/pagefault.c -o build/temp.linux-x86_64-2.7/bigfile/pagefault.o -fno-strict-aliasing -std=gnu99 -fplan9-extensions -Wno-declaration-after-statement -Wno-error=declaration-after-statement
      In file included from ./include/wendelin/list.h:11,
                       from ./include/wendelin/bigfile/virtmem.h:50,
                       from bigfile/pagefault.c:29:
      ./3rdparty/ccan/ccan/array_size/array_size.h:4:10: fatal error: config.h: Нет такого файла или каталога
          4 | #include "config.h"
            |          ^~~~~~~~~~
      compilation terminated.
      error: command 'x86_64-linux-gnu-gcc' failed with exit status 1
      ----------------------------------------
      ERROR: Failed building wheel for wendelin.core
    Failed to build wendelin.core
    ERROR: Could not build wheels for wendelin.core which use PEP 517 and cannot be installed directly

-> Fix it by making build_dso also first come through `make all`.

NOTE we cannot fix it in exactly the same way as for build_ext: if we split
build_dso into build_dso and ll_build_dso, `make all` will still go to infinite
recursion: build_dso -> ll_build_dso -> build_dso (not ll_build_dso, this is controlled by setuptools_dso) -> oops.

Starting from version 0.1 pygolang provides File out of the box:

pygolang@4690460b
https://pypi.org/project/pygolang/#pygolang-change-history

-> Use it and remove our custom File implementation that originally
served as POC for that pygolang functionality.

Don't use golang::* namespaces to avoid clashes with pygolang adding
something in there and getting compilation error due to conflict, when
e.g. pygolang!17 lands.

-> use xgolang:: as top-level namespace for what was previously living
in golang:: shipped in wendelin.core.

Inside that xgolang:: namespace don't use the same package names that
might be used inside golang:: in pygolang. This avoids ambiguation and
compile error in the future on e.g. os::AfterFork - is `using namespace
golang` and `using namespace xgolang` were both activated.

-> Prefix all namespaces inside xgolang:: also with "x".

See pygolang!17