Merge branch 'docs/broken-links' into 'master'

Fix most of broken docs links

See merge request !9275

doc/administration/build_artifacts.md

-This document was moved to [jobs_artifacts](jobs_artifacts.md).
+This document was moved to [job_artifacts](job_artifacts.md).

doc/administration/pages/index.md

@@ -54,7 +54,7 @@ Before proceeding with the Pages configuration, you will need to:
 1. Configure a **wildcard DNS record**.
 1. (Optional) Have a **wildcard certificate** for that domain if you decide to
    serve Pages under HTTPS.
-1. (Optional but recommended) Enable [Shared runners](../ci/runners/README.md)
+1. (Optional but recommended) Enable [Shared runners](../../ci/runners/README.md)
    so that your users don't have to bring their own.
 
 ### DNS configuration
@@ -236,7 +236,7 @@ latest previous version.
 [8-3-docs]: https://gitlab.com/gitlab-org/gitlab-ee/blob/8-3-stable-ee/doc/pages/administration.md
 [8-5-docs]: https://gitlab.com/gitlab-org/gitlab-ee/blob/8-5-stable-ee/doc/pages/administration.md
 [8-17-docs]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-17-stable-ce/doc/administration/pages/index.md
-[backup]: ../raketasks/backup_restore.md
+[backup]: ../../raketasks/backup_restore.md
 [ce-14605]: https://gitlab.com/gitlab-org/gitlab-ce/issues/14605
 [ee-80]: https://gitlab.com/gitlab-org/gitlab-ee/merge_requests/80
 [ee-173]: https://gitlab.com/gitlab-org/gitlab-ee/merge_requests/173
@@ -244,6 +244,6 @@ latest previous version.
 [NGINX configs]: https://gitlab.com/gitlab-org/gitlab-ee/tree/8-5-stable-ee/lib/support/nginx
 [pages-readme]: https://gitlab.com/gitlab-org/gitlab-pages/blob/master/README.md
 [pages-userguide]: ../../user/project/pages/index.md
-[reconfigure]: ../administration/restart_gitlab.md#omnibus-gitlab-reconfigure
-[restart]: ../administration/restart_gitlab.md#installations-from-source
+[reconfigure]: ../restart_gitlab.md#omnibus-gitlab-reconfigure
+[restart]: ../restart_gitlab.md#installations-from-source
 [gitlab-pages]: https://gitlab.com/gitlab-org/gitlab-pages/tree/v0.2.4

doc/administration/pages/source.md

@@ -311,13 +311,13 @@ Pages are part of the [regular backup][backup] so there is nothing to configure.
 You should strongly consider running GitLab pages under a different hostname
 than GitLab to prevent XSS attacks.
 
-[backup]: ../raketasks/backup_restore.md
+[backup]: ../../raketasks/backup_restore.md
 [ee-80]: https://gitlab.com/gitlab-org/gitlab-ee/merge_requests/80
 [ee-173]: https://gitlab.com/gitlab-org/gitlab-ee/merge_requests/173
 [gitlab pages daemon]: https://gitlab.com/gitlab-org/gitlab-pages
 [NGINX configs]: https://gitlab.com/gitlab-org/gitlab-ee/tree/8-5-stable-ee/lib/support/nginx
 [pages-readme]: https://gitlab.com/gitlab-org/gitlab-pages/blob/master/README.md
 [pages-userguide]: ../../user/project/pages/index.md
-[reconfigure]: ../administration/restart_gitlab.md#omnibus-gitlab-reconfigure
-[restart]: ../administration/restart_gitlab.md#installations-from-source
+[reconfigure]: ../restart_gitlab.md#omnibus-gitlab-reconfigure
+[restart]: ../restart_gitlab.md#installations-from-source
 [gitlab-pages]: https://gitlab.com/gitlab-org/gitlab-pages/tree/v0.2.4

doc/ci/build_artifacts/README.md

-This document was moved to [user/project/job_artifacts.md](../../user/project/job_artifacts.md).
+This document was moved to [pipelines/job_artifacts.md](../../user/project/pipelines/job_artifacts.md).

doc/ci/pipelines.md

@@ -21,7 +21,7 @@ There are three types of pipelines that often use the single shorthand of "pipel
 
 1. **CI Pipeline**: Build and test stages defined in `.gitlab-ci.yml`
 2. **Deploy Pipeline**: Deploy stage(s) defined in `.gitlab-ci.yml` The flow of deploying code to servers through various stages: e.g. development to staging to production
-3. **Project Pipeline**: Cross-project CI dependencies [triggered via API]((triggers)), particularly for micro-services, but also for complicated build dependencies: e.g. api -> front-end, ce/ee -> omnibus.
+3. **Project Pipeline**: Cross-project CI dependencies [triggered via API][triggers], particularly for micro-services, but also for complicated build dependencies: e.g. api -> front-end, ce/ee -> omnibus.
 
 ## Development Workflows
 
@@ -99,3 +99,4 @@ respective link in the [Pipelines settings] page.
 [stages]: yaml/README.md#stages
 [runners]: runners/README.html
 [pipelines settings]: ../user/project/pipelines/settings.md
+[triggers]: triggers/README.md

doc/ci/runners/README.md

@@ -8,14 +8,13 @@ A Runner can be specific to a certain project or serve any project
 in GitLab CI. A Runner that serves all projects is called a shared Runner.
 
 Ideally, GitLab Runner should not be installed on the same machine as GitLab.
-Read the [requirements documentation](../../install/requirements.md#gitlab-Runner)
+Read the [requirements documentation](../../install/requirements.md#gitlab-runner)
 for more information.
 
 ## Shared vs. Specific Runners
 
 A Runner that is specific only runs for the specified project. A shared Runner
-can run jobs for every project that has enabled the option
-`Allow shared Runners`.
+can run jobs for every project that has enabled the option **Allow shared Runners**.
 
 **Shared Runners** are useful for jobs that have similar requirements,
 between multiple projects. Rather than having multiple Runners idling for
@@ -44,7 +43,7 @@ A fork does copy the CI settings (jobs, allow shared, etc) of the cloned reposit
 There are several ways to create a Runner. Only after creation, upon
 registration its status as Shared or Specific is determined.
 
-[See the documentation for](https://gitlab.com/gitlab-org/gitlab-ci-multi-Runner/#installation)
+[See the documentation for](https://docs.gitlab.com/runner/install)
 the different methods of installing a Runner instance.
 
 After installing the Runner, you can either register it as `Shared` or as `Specific`.
@@ -55,19 +54,19 @@ You can only register a Shared Runner if you have admin access to the GitLab ins
 You can only register a shared Runner if you are an admin on the linked
 GitLab instance.
 
-Grab the shared-Runner token on the `admin/Runners` page of your GitLab CI
+Grab the shared-Runner token on the `admin/runners` page of your GitLab CI
 instance.
 
-![shared token](shared_Runner.png)
+![shared token](shared_runner.png)
 
 Now simply register the Runner as any Runner:
 
 ```
-sudo gitlab-ci-multi-Runner register
+sudo gitlab-ci-multi-runner register
 ```
 
 Shared Runners are enabled by default as of GitLab 8.2, but can be disabled with the
-`DISABLE SHARED RunnerS` button. Previous versions of GitLab defaulted shared Runners to
+`DISABLE SHARED RUNNERS` button. Previous versions of GitLab defaulted shared Runners to
 disabled.
 
 ## Registering a Specific Runner
@@ -93,7 +92,7 @@ setup a specific Runner for this project.
 To register the Runner, run the command below and follow instructions:
 
 ```
-sudo gitlab-ci-multi-Runner register
+sudo gitlab-ci-multi-runner register
 ```
 
 ###  Lock a specific Runner from being enabled for other projects
@@ -108,7 +107,7 @@ If you are an admin on your GitLab instance,
 you can make any shared Runner a specific Runner, _but you can not
 make a specific Runner a shared Runner_.
 
-To make a shared Runner specific, go to the Runner page (`/admin/Runners`)
+To make a shared Runner specific, go to the Runner page (`/admin/runners`)
 and find your Runner. Add any projects on the left to make this Runner
 run exclusively for these projects, therefore making it a specific Runner.
 

doc/update/7.0-to-7.1.md

@@ -136,3 +136,5 @@ cd /home/git/gitlab
 sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
 ```
 If you have more than one backup *.tar file(s) please add `BACKUP=timestamp_of_backup` to the command above.
+
+[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-1-stable/config/gitlab.yml.example

doc/update/7.1-to-7.2.md

@@ -135,3 +135,5 @@ cd /home/git/gitlab
 sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
 ```
 If you have more than one backup *.tar file(s) please add `BACKUP=timestamp_of_backup` to the command above.
+
+[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-2-stable/config/gitlab.yml.example

doc/update/7.10-to-7.11.md

@@ -65,7 +65,7 @@ sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
 
 #### New configuration options for `gitlab.yml`
 
-There are new configuration options available for [`gitlab.yml`](config/gitlab.yml.example). View them with the command below and apply them to your current `gitlab.yml`.
+There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them to your current `gitlab.yml`.
 
 ```
 git diff origin/7-10-stable:config/gitlab.yml.example origin/7-11-stable:config/gitlab.yml.example
@@ -101,3 +101,5 @@ cd /home/git/gitlab
 sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
 ```
 If you have more than one backup *.tar file(s) please add `BACKUP=timestamp_of_backup` to the command above.
+
+[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-11-stable/config/gitlab.yml.example

doc/update/7.11-to-7.12.md

@@ -91,7 +91,7 @@ sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
 
 #### New configuration options for `gitlab.yml`
 
-There are new configuration options available for [`gitlab.yml`](config/gitlab.yml.example). View them with the command below and apply them to your current `gitlab.yml`.
+There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them to your current `gitlab.yml`.
 
 ```
 git diff origin/7-11-stable:config/gitlab.yml.example origin/7-12-stable:config/gitlab.yml.example
@@ -127,3 +127,5 @@ cd /home/git/gitlab
 sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
 ```
 If you have more than one backup *.tar file(s) please add `BACKUP=timestamp_of_backup` to the command above.
+
+[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-12-stable/config/gitlab.yml.example

doc/update/7.12-to-7.13.md

@@ -91,7 +91,7 @@ sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
 
 #### New configuration options for `gitlab.yml`
 
-There are new configuration options available for [`gitlab.yml`](config/gitlab.yml.example). View them with the command below and apply them to your current `gitlab.yml`.
+There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them to your current `gitlab.yml`.
 
 ```
 git diff origin/7-12-stable:config/gitlab.yml.example origin/7-13-stable:config/gitlab.yml.example
@@ -127,3 +127,5 @@ cd /home/git/gitlab
 sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
 ```
 If you have more than one backup *.tar file(s) please add `BACKUP=timestamp_of_backup` to the command above.
+
+[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-13-stable/config/gitlab.yml.example

doc/update/7.13-to-7.14.md

@@ -91,7 +91,7 @@ sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
 
 #### New configuration options for `gitlab.yml`
 
-There are new configuration options available for [`gitlab.yml`](config/gitlab.yml.example). View them with the command below and apply them to your current `gitlab.yml`.
+There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them to your current `gitlab.yml`.
 
 ```
 git diff origin/7-13-stable:config/gitlab.yml.example origin/7-14-stable:config/gitlab.yml.example
@@ -127,3 +127,5 @@ cd /home/git/gitlab
 sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
 ```
 If you have more than one backup *.tar file(s) please add `BACKUP=timestamp_of_backup` to the command above.
+
+[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-14-stable/config/gitlab.yml.example

doc/update/7.14-to-8.0.md

@@ -143,7 +143,7 @@ sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
 
 #### New configuration options for `gitlab.yml`
 
-There are new configuration options available for [`gitlab.yml`](config/gitlab.yml.example). View them with the command below and apply them manually to your current `gitlab.yml`:
+There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
 
 ```sh
 git diff origin/7-14-stable:config/gitlab.yml.example origin/8-0-stable:config/gitlab.yml.example
@@ -227,3 +227,5 @@ this is likely due to an outdated Nginx or Apache configuration, or a missing or
 misconfigured `gitlab-git-http-server` instance. Double-check that you correctly
 completed [Step 5](#5-install-gitlab-git-http-server) to install the daemon and
 [Step 8](#new-nginx-configuration) to reconfigure Nginx.
+
+[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-0-stable/config/gitlab.yml.example

doc/update/7.2-to-7.3.md

@@ -143,3 +143,5 @@ cd /home/git/gitlab
 sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
 ```
 If you have more than one backup *.tar file(s) please add `BACKUP=timestamp_of_backup` to the command above.
+
+[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-3-stable/config/gitlab.yml.example

doc/update/7.3-to-7.4.md

@@ -75,7 +75,7 @@ sudo -u git -H editor config/unicorn.rb
 
 #### MySQL Databases: Update database.yml config file
 
-* Add `collation: utf8_general_ci` to `config/database.yml` as seen in [config/database.yml.mysql](/config/database.yml.mysql)
+* Add `collation: utf8_general_ci` to `config/database.yml` as seen in [config/database.yml.mysql][mysql]:
 
 ```
 sudo -u git -H editor config/database.yml
@@ -192,6 +192,5 @@ sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
 ```
 If you have more than one backup *.tar file(s) please add `BACKUP=timestamp_of_backup` to the command above.
 
-
-
-
+[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-4-stable/config/gitlab.yml.example
+[mysql]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-4-stable/config/database.yml.mysql

doc/update/7.4-to-7.5.md

@@ -73,8 +73,8 @@ git diff origin/7-4-stable:config/gitlab.yml.example origin/7-5-stable:config/gi
 
 #### Change Nginx settings
 
-* HTTP setups: Make `/etc/nginx/sites-available/gitlab` the same as [`lib/support/nginx/gitlab`](/lib/support/nginx/gitlab) but with your settings
-* HTTPS setups: Make `/etc/nginx/sites-available/gitlab-ssl` the same as [`lib/support/nginx/gitlab-ssl`](/lib/support/nginx/gitlab-ssl) but with your setting
+* HTTP setups: Make `/etc/nginx/sites-available/gitlab` the same as [`lib/support/nginx/gitlab`][nginx] but with your settings
+* HTTPS setups: Make `/etc/nginx/sites-available/gitlab-ssl` the same as [`lib/support/nginx/gitlab-ssl`][nginx-ssl] but with your setting
 
 ### 6. Start application
 
@@ -106,3 +106,7 @@ cd /home/git/gitlab
 sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
 ```
 If you have more than one backup *.tar file(s) please add `BACKUP=timestamp_of_backup` to the command above.
+
+[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-5-stable/config/gitlab.yml.example
+[nginx]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-5-stable/lib/support/nginx/gitlab
+[nginx-ssl]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-5-stable/lib/support/nginx/gitlab-ssl

doc/update/7.5-to-7.6.md

@@ -67,7 +67,7 @@ sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
 
 #### New configuration options for `gitlab.yml`
 
-There are new configuration options available for [`gitlab.yml`](config/gitlab.yml.example). View them with the command below and apply them to your current `gitlab.yml`.
+There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them to your current `gitlab.yml`.
 
 ```
 git diff origin/7-5-stable:config/gitlab.yml.example origin/7-6-stable:config/gitlab.yml.example
@@ -75,12 +75,12 @@ git diff origin/7-5-stable:config/gitlab.yml.example origin/7-6-stable:config/gi
 
 #### Change Nginx settings
 
-* HTTP setups: Make `/etc/nginx/sites-available/gitlab` the same as [`lib/support/nginx/gitlab`](/lib/support/nginx/gitlab) but with your settings
-* HTTPS setups: Make `/etc/nginx/sites-available/gitlab-ssl` the same as [`lib/support/nginx/gitlab-ssl`](/lib/support/nginx/gitlab-ssl) but with your setting
+* HTTP setups: Make `/etc/nginx/sites-available/gitlab` the same as [`lib/support/nginx/gitlab`][nginx] but with your settings
+* HTTPS setups: Make `/etc/nginx/sites-available/gitlab-ssl` the same as [`lib/support/nginx/gitlab-ssl`][nginx-ssl] but with your setting
 
 #### Setup time zone (optional)
 
-Consider setting the time zone in `gitlab.yml` otherwise GitLab will default to UTC. If you set a time zone previously in [`application.rb`](config/application.rb) (unlikely), unset it.
+Consider setting the time zone in `gitlab.yml` otherwise GitLab will default to UTC. If you set a time zone previously in [`application.rb`][app] (unlikely), unset it.
 
 ### 6. Start application
 
@@ -112,3 +112,8 @@ cd /home/git/gitlab
 sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
 ```
 If you have more than one backup *.tar file(s) please add `BACKUP=timestamp_of_backup` to the command above.
+
+[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-6-stable/config/gitlab.yml.example
+[app]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-6-stable/config/application.rb
+[nginx]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-6-stable/lib/support/nginx/gitlab
+[nginx-ssl]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-6-stable/lib/support/nginx/gitlab-ssl

doc/update/7.6-to-7.7.md

@@ -67,7 +67,7 @@ sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
 
 #### New configuration options for `gitlab.yml`
 
-There are new configuration options available for [`gitlab.yml`](/config/gitlab.yml.example). View them with the command below and apply them to your current `gitlab.yml`.
+There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them to your current `gitlab.yml`.
 
 ```
 git diff origin/7-6-stable:config/gitlab.yml.example origin/7-7-stable:config/gitlab.yml.example
@@ -75,12 +75,12 @@ git diff origin/7-6-stable:config/gitlab.yml.example origin/7-7-stable:config/gi
 
 #### Change Nginx settings
 
-* HTTP setups: Make `/etc/nginx/sites-available/gitlab` the same as [`lib/support/nginx/gitlab`](/lib/support/nginx/gitlab) but with your settings
-* HTTPS setups: Make `/etc/nginx/sites-available/gitlab-ssl` the same as [`lib/support/nginx/gitlab-ssl`](/lib/support/nginx/gitlab-ssl) but with your setting
+* HTTP setups: Make `/etc/nginx/sites-available/gitlab` the same as [`lib/support/nginx/gitlab`][nginx] but with your settings
+* HTTPS setups: Make `/etc/nginx/sites-available/gitlab-ssl` the same as [`lib/support/nginx/gitlab-ssl`][nginx-ssl] but with your setting
 
 #### Setup time zone (optional)
 
-Consider setting the time zone in `gitlab.yml` otherwise GitLab will default to UTC. If you set a time zone previously in [`application.rb`](config/application.rb) (unlikely), unset it.
+Consider setting the time zone in `gitlab.yml` otherwise GitLab will default to UTC. If you set a time zone previously in [`application.rb`][app] (unlikely), unset it.
 
 ### 6. Start application
 
@@ -101,7 +101,7 @@ If all items are green, then congratulations upgrade is complete!
 
 ### 8. GitHub settings (if applicable)
 
-If you are using GitHub as an OAuth provider for authentication, you should change the callback URL so that it 
+If you are using GitHub as an OAuth provider for authentication, you should change the callback URL so that it
 only contains a root URL (ex. `https://gitlab.example.com/`)
 
 ## Things went south? Revert to previous version (7.6)
@@ -117,3 +117,8 @@ cd /home/git/gitlab
 sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
 ```
 If you have more than one backup *.tar file(s) please add `BACKUP=timestamp_of_backup` to the command above.
+
+[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-7-stable/config/gitlab.yml.example
+[app]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-7-stable/config/application.rb
+[nginx]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-7-stable/lib/support/nginx/gitlab
+[nginx-ssl]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-7-stable/lib/support/nginx/gitlab-ssl

doc/update/7.7-to-7.8.md

@@ -67,7 +67,7 @@ sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
 
 #### New configuration options for `gitlab.yml`
 
-There are new configuration options available for [`gitlab.yml`](config/gitlab.yml.example). View them with the command below and apply them to your current `gitlab.yml`.
+There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them to your current `gitlab.yml`.
 
 ```
 git diff origin/7-7-stable:config/gitlab.yml.example origin/7-8-stable:config/gitlab.yml.example
@@ -75,13 +75,13 @@ git diff origin/7-7-stable:config/gitlab.yml.example origin/7-8-stable:config/gi
 
 #### Change Nginx settings
 
-* HTTP setups: Make `/etc/nginx/sites-available/gitlab` the same as [`lib/support/nginx/gitlab`](/lib/support/nginx/gitlab) but with your settings.
-* HTTPS setups: Make `/etc/nginx/sites-available/gitlab-ssl` the same as [`lib/support/nginx/gitlab-ssl`](/lib/support/nginx/gitlab-ssl) but with your settings.
+* HTTP setups: Make `/etc/nginx/sites-available/gitlab` the same as [`lib/support/nginx/gitlab`][nginx] but with your settings.
+* HTTPS setups: Make `/etc/nginx/sites-available/gitlab-ssl` the same as [`lib/support/nginx/gitlab-ssl`][nginx-ssl] but with your settings.
 * A new `location /uploads/` section has been added that needs to have the same content as the existing `location @gitlab` section.
 
 #### Setup time zone (optional)
 
-Consider setting the time zone in `gitlab.yml` otherwise GitLab will default to UTC. If you set a time zone previously in [`application.rb`](config/application.rb) (unlikely), unset it.
+Consider setting the time zone in `gitlab.yml` otherwise GitLab will default to UTC. If you set a time zone previously in [`application.rb`][app] (unlikely), unset it.
 
 ### 6. Start application
 
@@ -118,3 +118,8 @@ cd /home/git/gitlab
 sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
 ```
 If you have more than one backup *.tar file(s) please add `BACKUP=timestamp_of_backup` to the command above.
+
+[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-8-stable/config/gitlab.yml.example
+[app]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-8-stable/config/application.rb
+[nginx]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-8-stable/lib/support/nginx/gitlab
+[nginx-ssl]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-8-stable/lib/support/nginx/gitlab-ssl

doc/update/7.8-to-7.9.md

@@ -69,7 +69,7 @@ sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
 
 #### New configuration options for `gitlab.yml`
 
-There are new configuration options available for [`gitlab.yml`](config/gitlab.yml.example). View them with the command below and apply them to your current `gitlab.yml`.
+There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them to your current `gitlab.yml`.
 
 ```
 git diff origin/7-8-stable:config/gitlab.yml.example origin/7-9-stable:config/gitlab.yml.example
@@ -77,13 +77,13 @@ git diff origin/7-8-stable:config/gitlab.yml.example origin/7-9-stable:config/gi
 
 #### Change Nginx settings
 
-* HTTP setups: Make `/etc/nginx/sites-available/gitlab` the same as [`lib/support/nginx/gitlab`](/lib/support/nginx/gitlab) but with your settings.
-* HTTPS setups: Make `/etc/nginx/sites-available/gitlab-ssl` the same as [`lib/support/nginx/gitlab-ssl`](/lib/support/nginx/gitlab-ssl) but with your settings.
+* HTTP setups: Make `/etc/nginx/sites-available/gitlab` the same as [`lib/support/nginx/gitlab`][nginx] but with your settings.
+* HTTPS setups: Make `/etc/nginx/sites-available/gitlab-ssl` the same as [`lib/support/nginx/gitlab-ssl`][nginx-ssl] but with your settings.
 * A new `location /uploads/` section has been added that needs to have the same content as the existing `location @gitlab` section.
 
 #### Setup time zone (optional)
 
-Consider setting the time zone in `gitlab.yml` otherwise GitLab will default to UTC. If you set a time zone previously in [`application.rb`](config/application.rb) (unlikely), unset it.
+Consider setting the time zone in `gitlab.yml` otherwise GitLab will default to UTC. If you set a time zone previously in [`application.rb`][app] (unlikely), unset it.
 
 ### 6. Start application
 
@@ -120,3 +120,8 @@ cd /home/git/gitlab
 sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
 ```
 If you have more than one backup *.tar file(s) please add `BACKUP=timestamp_of_backup` to the command above.
+
+[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-9-stable/config/gitlab.yml.example
+[app]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-9-stable/config/application.rb
+[nginx]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-9-stable/lib/support/nginx/gitlab
+[nginx-ssl]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-9-stable/lib/support/nginx/gitlab-ssl

doc/update/7.9-to-7.10.md

@@ -65,7 +65,7 @@ sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
 
 #### New configuration options for `gitlab.yml`
 
-There are new configuration options available for [`gitlab.yml`](config/gitlab.yml.example). View them with the command below and apply them to your current `gitlab.yml`.
+There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them to your current `gitlab.yml`.
 
 ```
 git diff origin/7-9-stable:config/gitlab.yml.example origin/7-10-stable:config/gitlab.yml.example
@@ -73,13 +73,13 @@ git diff origin/7-9-stable:config/gitlab.yml.example origin/7-10-stable:config/g
 
 #### Change Nginx settings
 
-* HTTP setups: Make `/etc/nginx/sites-available/gitlab` the same as [`lib/support/nginx/gitlab`](/lib/support/nginx/gitlab) but with your settings.
-* HTTPS setups: Make `/etc/nginx/sites-available/gitlab-ssl` the same as [`lib/support/nginx/gitlab-ssl`](/lib/support/nginx/gitlab-ssl) but with your settings.
+* HTTP setups: Make `/etc/nginx/sites-available/gitlab` the same as [`lib/support/nginx/gitlab`][nginx] but with your settings.
+* HTTPS setups: Make `/etc/nginx/sites-available/gitlab-ssl` the same as [`lib/support/nginx/gitlab-ssl`][nginx-ssl] but with your settings.
 * A new `location /uploads/` section has been added that needs to have the same content as the existing `location @gitlab` section.
 
 #### Setup time zone (optional)
 
-Consider setting the time zone in `gitlab.yml` otherwise GitLab will default to UTC. If you set a time zone previously in [`application.rb`](config/application.rb) (unlikely), unset it.
+Consider setting the time zone in `gitlab.yml` otherwise GitLab will default to UTC. If you set a time zone previously in [`application.rb`][app] (unlikely), unset it.
 
 ### 6. Start application
 
@@ -116,3 +116,8 @@ cd /home/git/gitlab
 sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
 ```
 If you have more than one backup *.tar file(s) please add `BACKUP=timestamp_of_backup` to the command above.
+
+[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-10-stable/config/gitlab.yml.example
+[app]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-10-stable/config/application.rb
+[nginx]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-10-stable/lib/support/nginx/gitlab
+[nginx-ssl]: https://gitlab.com/gitlab-org/gitlab-ce/blob/7-10-stable/lib/support/nginx/gitlab-ssl

doc/update/8.0-to-8.1.md

@@ -108,7 +108,7 @@ For Ubuntu 16.04.1 LTS:
 
 #### New configuration options for `gitlab.yml`
 
-There are new configuration options available for [`gitlab.yml`](config/gitlab.yml.example). View them with the command below and apply them manually to your current `gitlab.yml`:
+There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
 
 ```sh
 git diff origin/8-0-stable:config/gitlab.yml.example origin/8-1-stable:config/gitlab.yml.example
@@ -173,3 +173,5 @@ If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of
 ### "You appear to have cloned an empty repository."
 
 See the [7.14 to 8.0 update guide](7.14-to-8.0.md#troubleshooting).
+
+[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-1-stable/config/gitlab.yml.example

doc/update/8.1-to-8.2.md

@@ -125,7 +125,7 @@ For Ubuntu 16.04.1 LTS:
 
 #### New configuration options for `gitlab.yml`
 
-There are new configuration options available for [`gitlab.yml`](config/gitlab.yml.example). View them with the command below and apply them manually to your current `gitlab.yml`:
+There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
 
 ```sh
 git diff origin/8-1-stable:config/gitlab.yml.example origin/8-2-stable:config/gitlab.yml.example
@@ -190,3 +190,5 @@ If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of
 ### "You appear to have cloned an empty repository."
 
 See the [7.14 to 8.0 update guide](7.14-to-8.0.md#troubleshooting).
+
+[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-2-stable/config/gitlab.yml.example

doc/update/8.10-to-8.11.md

@@ -114,7 +114,7 @@ sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS
 
 #### New configuration options for `gitlab.yml`
 
-There are new configuration options available for [`gitlab.yml`](config/gitlab.yml.example). View them with the command below and apply them manually to your current `gitlab.yml`:
+There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
 
 ```sh
 git diff origin/8-10-stable:config/gitlab.yml.example origin/8-11-stable:config/gitlab.yml.example
@@ -195,3 +195,5 @@ sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
 ```
 
 If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
+
+[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-11-stable/config/gitlab.yml.example

doc/update/8.11-to-8.12.md

@@ -113,7 +113,7 @@ sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS
 
 #### New configuration options for `gitlab.yml`
 
-There are new configuration options available for [`gitlab.yml`](config/gitlab.yml.example). View them with the command below and apply them manually to your current `gitlab.yml`:
+There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
 
 ```sh
 git diff origin/8-11-stable:config/gitlab.yml.example origin/8-12-stable:config/gitlab.yml.example
@@ -203,3 +203,5 @@ sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
 ```
 
 If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
+
+[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-12-stable/config/gitlab.yml.example

doc/update/8.12-to-8.13.md

@@ -113,7 +113,7 @@ sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS
 
 #### New configuration options for `gitlab.yml`
 
-There are new configuration options available for [`gitlab.yml`](config/gitlab.yml.example). View them with the command below and apply them manually to your current `gitlab.yml`:
+There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
 
 ```sh
 git diff origin/8-12-stable:config/gitlab.yml.example origin/8-13-stable:config/gitlab.yml.example
@@ -203,3 +203,5 @@ sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
 ```
 
 If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
+
+[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-13-stable/config/gitlab.yml.example

doc/update/8.13-to-8.14.md

@@ -113,7 +113,7 @@ sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS
 
 #### New configuration options for `gitlab.yml`
 
-There are new configuration options available for [`gitlab.yml`](config/gitlab.yml.example). View them with the command below and apply them manually to your current `gitlab.yml`:
+There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
 
 ```sh
 git diff origin/8-13-stable:config/gitlab.yml.example origin/8-14-stable:config/gitlab.yml.example
@@ -203,3 +203,5 @@ sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
 ```
 
 If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
+
+[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-14-stable/config/gitlab.yml.example

doc/update/8.14-to-8.15.md

@@ -122,7 +122,7 @@ sudo -u git -H git checkout v4.1.1
 
 #### New configuration options for `gitlab.yml`
 
-There are new configuration options available for [`gitlab.yml`](config/gitlab.yml.example). View them with the command below and apply them manually to your current `gitlab.yml`:
+There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
 
 ```sh
 cd /home/git/gitlab
@@ -235,3 +235,5 @@ sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
 ```
 
 If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
+
+[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-15-stable/config/gitlab.yml.example

doc/update/8.15-to-8.16.md

@@ -124,7 +124,7 @@ sudo -u git -H git checkout v4.1.1
 
 #### New configuration options for `gitlab.yml`
 
-There are new configuration options available for [`gitlab.yml`](config/gitlab.yml.example). View them with the command below and apply them manually to your current `gitlab.yml`:
+There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
 
 ```sh
 cd /home/git/gitlab
@@ -237,3 +237,5 @@ sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
 ```
 
 If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
+
+[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-16-stable/config/gitlab.yml.example

doc/update/8.16-to-8.17.md

@@ -124,7 +124,7 @@ sudo -u git -H git checkout v4.1.1
 
 #### New configuration options for `gitlab.yml`
 
-There are new configuration options available for [`gitlab.yml`](config/gitlab.yml.example). View them with the command below and apply them manually to your current `gitlab.yml`:
+There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
 
 ```sh
 cd /home/git/gitlab
@@ -237,3 +237,5 @@ sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
 ```
 
 If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
+
+[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-17-stable/config/gitlab.yml.example

doc/update/8.2-to-8.3.md

@@ -114,7 +114,7 @@ sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS
 
 #### New configuration options for `gitlab.yml`
 
-There are new configuration options available for [`gitlab.yml`](config/gitlab.yml.example). View them with the command below and apply them manually to your current `gitlab.yml`:
+There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
 
 ```sh
 git diff origin/8-2-stable:config/gitlab.yml.example origin/8-3-stable:config/gitlab.yml.example
@@ -211,3 +211,5 @@ If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of
 ### "You appear to have cloned an empty repository."
 
 See the [7.14 to 8.0 update guide](7.14-to-8.0.md#troubleshooting).
+
+[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-3-stable/config/gitlab.yml.example

doc/update/8.3-to-8.4.md

@@ -84,7 +84,7 @@ sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS
 
 #### New configuration options for `gitlab.yml`
 
-There are new configuration options available for [`gitlab.yml`](config/gitlab.yml.example). View them with the command below and apply them manually to your current `gitlab.yml`:
+There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
 
 ```sh
 git diff origin/8-3-stable:config/gitlab.yml.example origin/8-4-stable:config/gitlab.yml.example
@@ -98,7 +98,7 @@ We updated the init script for GitLab in order to set a specific PATH for gitlab
 cd /home/git/gitlab
 sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
 ```
-    
+
 For Ubuntu 16.04.1 LTS:
 
     sudo systemctl daemon-reload
@@ -135,3 +135,5 @@ sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
 ```
 
 If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
+
+[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-4-stable/config/gitlab.yml.example

doc/update/8.4-to-8.5.md

@@ -88,7 +88,7 @@ sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS
 
 #### New configuration options for `gitlab.yml`
 
-There are new configuration options available for [`gitlab.yml`](config/gitlab.yml.example). View them with the command below and apply them manually to your current `gitlab.yml`:
+There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
 
 ```sh
 git diff origin/8-4-stable:config/gitlab.yml.example origin/8-5-stable:config/gitlab.yml.example
@@ -119,7 +119,7 @@ via [/etc/default/gitlab].
 Ensure you're still up-to-date with the latest init script changes:
 
     sudo cp lib/support/init.d/gitlab /etc/init.d/gitlab
-    
+
 For Ubuntu 16.04.1 LTS:
 
     sudo systemctl daemon-reload
@@ -156,3 +156,5 @@ sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
 ```
 
 If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
+
+[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-5-stable/config/gitlab.yml.example

doc/update/8.5-to-8.6.md

@@ -107,7 +107,7 @@ sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS
 
 #### New configuration options for `gitlab.yml`
 
-There are new configuration options available for [`gitlab.yml`](config/gitlab.yml.example). View them with the command below and apply them manually to your current `gitlab.yml`:
+There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
 
 ```sh
 git diff origin/8-5-stable:config/gitlab.yml.example origin/8-6-stable:config/gitlab.yml.example
@@ -175,3 +175,5 @@ sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
 ```
 
 If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
+
+[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-6-stable/config/gitlab.yml.example

doc/update/8.6-to-8.7.md

@@ -88,7 +88,7 @@ sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS
 
 #### New configuration options for `gitlab.yml`
 
-There are new configuration options available for [`gitlab.yml`](config/gitlab.yml.example). View them with the command below and apply them manually to your current `gitlab.yml`:
+There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
 
 ```sh
 git diff origin/8-6-stable:config/gitlab.yml.example origin/8-7-stable:config/gitlab.yml.example
@@ -164,3 +164,5 @@ sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
 ```
 
 If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
+
+[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-7-stable/config/gitlab.yml.example

doc/update/8.7-to-8.8.md

@@ -88,7 +88,7 @@ sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS
 
 #### New configuration options for `gitlab.yml`
 
-There are new configuration options available for [`gitlab.yml`](config/gitlab.yml.example). View them with the command below and apply them manually to your current `gitlab.yml`:
+There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
 
 ```sh
 git diff origin/8-7-stable:config/gitlab.yml.example origin/8-8-stable:config/gitlab.yml.example
@@ -164,3 +164,5 @@ sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
 ```
 
 If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
+
+[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-8-stable/config/gitlab.yml.example

doc/update/8.8-to-8.9.md

@@ -104,7 +104,7 @@ sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS
 
 #### New configuration options for `gitlab.yml`
 
-There are new configuration options available for [`gitlab.yml`](config/gitlab.yml.example). View them with the command below and apply them manually to your current `gitlab.yml`:
+There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
 
 ```sh
 git diff origin/8-8-stable:config/gitlab.yml.example origin/8-9-stable:config/gitlab.yml.example
@@ -193,3 +193,5 @@ sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
 ```
 
 If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
+
+[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-9-stable/config/gitlab.yml.example

doc/update/8.9-to-8.10.md

@@ -104,7 +104,7 @@ sudo -u git -H bundle exec rake assets:clean assets:precompile cache:clear RAILS
 
 #### New configuration options for `gitlab.yml`
 
-There are new configuration options available for [`gitlab.yml`](config/gitlab.yml.example). View them with the command below and apply them manually to your current `gitlab.yml`:
+There are new configuration options available for [`gitlab.yml`][yaml]. View them with the command below and apply them manually to your current `gitlab.yml`:
 
 ```sh
 git diff origin/8-9-stable:config/gitlab.yml.example origin/8-10-stable:config/gitlab.yml.example
@@ -193,3 +193,5 @@ sudo -u git -H bundle exec rake gitlab:backup:restore RAILS_ENV=production
 ```
 
 If you have more than one backup `*.tar` file(s) please add `BACKUP=timestamp_of_backup` to the command above.
+
+[yaml]: https://gitlab.com/gitlab-org/gitlab-ce/blob/8-10-stable/config/gitlab.yml.example

doc/user/account/security.md

-This document was moved to [profile](../profile/index.md).
+This document was moved to [profile](../profile/account/index.md).

doc/user/markdown.md

@@ -524,35 +524,12 @@ There are two ways to create links, inline-style and reference-style.
     [1]: http://slashdot.org
     [link text itself]: https://www.reddit.com
 
-[I'm an inline-style link](https://www.google.com)
-
-[I'm a reference-style link][Arbitrary case-insensitive reference text]
-
-[I'm a relative reference to a repository file](LICENSE)[^1]
-
-[I am an absolute reference within the repository](/doc/user/markdown.md)
-
-[I link to the Milestones page](/../milestones)
-
-[You can use numbers for reference-style link definitions][1]
-
-Or leave it empty and use the [link text itself][]
-
-Some text to show that the reference links can follow later.
-
-[arbitrary case-insensitive reference text]: https://www.mozilla.org
-[1]: http://slashdot.org
-[link text itself]: https://www.reddit.com
-
-**Note**
-
-Relative links do not allow referencing project files in a wiki page or wiki page in a project file. The reason for this is that, in GitLab, wiki is always a separate git repository. For example:
-
-`[I'm a reference-style link](style)`
-
+>**Note:**
+Relative links do not allow referencing project files in a wiki page or wiki
+page in a project file. The reason for this is that, in GitLab, wiki is always
+a separate Git repository. For example, `[I'm a reference-style link](style)`
 will point the link to `wikis/style` when the link is inside of a wiki markdown file.
 
-
 ### Images
 
     Here's our logo (hover to see the title text):

doc/user/project/merge_requests/index.md

@@ -166,4 +166,4 @@ And to check out a particular merge request:
 git checkout origin/merge-requests/1
 ```
 
-[protected branches]: protected_branches.md
+[protected branches]: ../protected_branches.md

doc/user/project/pages/index.md

@@ -50,13 +50,13 @@ In brief, this is what you need to upload your website in GitLab Pages:
    (ask your administrator). This is very important, so you should first make
    sure you get that right.
 1. Create a project
-1. Push a [`.gitlab-ci.yml` file](../ci/yaml/README.md) in the root directory
+1. Push a [`.gitlab-ci.yml` file][yaml] in the root directory
    of your repository with a specific job named [`pages`][pages]
 1. Set up a GitLab Runner to build your website
 
 > **Note:**
-> If [shared runners](../ci/runners/README.md) are enabled by your GitLab
-> administrator, you should be able to use them instead of bringing your own.
+If [shared runners](../../../ci/runners/README.md) are enabled by your GitLab
+administrator, you should be able to use them instead of bringing your own.
 
 ### User or group Pages
 
@@ -89,7 +89,7 @@ GitLab Pages for projects can be created by both user and group accounts.
 The steps to create a project page for a user or a group are identical:
 
 1. Create a new project
-1. Push a [`.gitlab-ci.yml` file](../ci/yaml/README.md) in the root directory
+1. Push a [`.gitlab-ci.yml` file][yaml] in the root directory
    of your repository with a specific job named [`pages`][pages].
 1. Set up a GitLab Runner to build your website
 
@@ -104,8 +104,8 @@ website being built live by following the CI job traces.
 
 > **Note:**
 > Before reading this section, make sure you familiarize yourself with GitLab CI
-> and the specific syntax of[`.gitlab-ci.yml`](../ci/yaml/README.md) by
-> following our [quick start guide](../ci/quick_start/README.md).
+> and the specific syntax of[`.gitlab-ci.yml`][yaml] by
+> following our [quick start guide].
 
 To make use of GitLab Pages, the contents of `.gitlab-ci.yml` must follow the
 rules below:
@@ -132,11 +132,11 @@ exit status, it then uploads the `public/` directory to GitLab Pages.
 
 The `public/` directory should contain all the static content of your website.
 Depending on how you plan to publish your website, the steps defined in the
-[`script` parameter](../ci/yaml/README.md#script) may differ.
+[`script` parameter](../../../ci/yaml/README.md#script) may differ.
 
 Be aware that Pages are by default branch/tag agnostic and their deployment
 relies solely on what you specify in `.gitlab-ci.yml`. If you don't limit the
-`pages` job with the [`only` parameter](../ci/yaml/README.md#only-and-except),
+`pages` job with the [`only` parameter](../../../ci/yaml/README.md#only-and-except),
 whenever a new commit is pushed to whatever branch or tag, the Pages will be
 overwritten. In the example below, we limit the Pages to be deployed whenever
 a commit is pushed only on the `master` branch:
@@ -237,7 +237,7 @@ get you started.
 
 Remember that GitLab Pages are by default branch/tag agnostic and their
 deployment relies solely on what you specify in `.gitlab-ci.yml`. You can limit
-the `pages` job with the [`only` parameter](../ci/yaml/README.md#only-and-except),
+the `pages` job with the [`only` parameter](../../../ci/yaml/README.md#only-and-except),
 whenever a new commit is pushed to a branch that will be used specifically for
 your pages.
 
@@ -426,10 +426,12 @@ For a list of known issues, visit GitLab's [public issue tracker].
 [ee-173]: https://gitlab.com/gitlab-org/gitlab-ee/merge_requests/173
 [pages-daemon]: https://gitlab.com/gitlab-org/gitlab-pages
 [gitlab ci]: https://about.gitlab.com/gitlab-ci
-[gitlab runner]: https://gitlab.com/gitlab-org/gitlab-ci-multi-runner
-[pages]: ../ci/yaml/README.md#pages
+[gitlab runner]: https://docs.gitlab.com/runner
+[pages]: ../../../ci/yaml/README.md#pages
+[yaml]: ../../../ci/yaml/README.md
 [staticgen]: https://www.staticgen.com/
 [pages-jekyll]: https://gitlab.com/pages/jekyll
 [metarefresh]: https://en.wikipedia.org/wiki/Meta_refresh
 [public issue tracker]: https://gitlab.com/gitlab-org/gitlab-ee/issues?label_name=Pages
 [ce-14605]: https://gitlab.com/gitlab-org/gitlab-ce/issues/14605
+[quick start guide]: ../../../ci/quick_start/README.md

doc/workflow/importing/import_projects_from_github.md

@@ -60,8 +60,7 @@ If the [GitHub integration][gh-import] is enabled by your GitLab administrator,
 you can use it instead of the personal access token.
 
 1. First you may want to connect your GitHub account to GitLab in order for
-   the username mapping to be correct. Follow the [social sign-in] documentation
-   on how to do so.
+   the username mapping to be correct.
 1. Once you connect GitHub, click the **List your GitHub repositories** button
    and you will be redirected to GitHub for permission to access your projects.
 1. After accepting, you'll be automatically redirected to the importer.
@@ -115,4 +114,3 @@ if you have the privileges to do so.
 [gh-import]: ../../integration/github.md "GitHub integration"
 [gh-integration]: #authorize-access-to-your-repositories-using-the-github-integration
 [gh-token]: #authorize-access-to-your-repositories-using-a-personal-access-token
-[social sign-in]: ../../profile/account/social_sign_in.md