autogenerated headers for rev...

autogenerated headers for rev https://github.com/mavlink/mavlink/tree/462e8a116d2a2c57de5958507247eb12bcac0da9

ASLUAV/version.h

@@ -7,7 +7,7 @@
 #ifndef MAVLINK_VERSION_H
 #define MAVLINK_VERSION_H
 
-#define MAVLINK_BUILD_DATE "Tue Oct 08 2019"
+#define MAVLINK_BUILD_DATE "Sun Oct 20 2019"
 #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
  

ardupilotmega/version.h

@@ -7,7 +7,7 @@
 #ifndef MAVLINK_VERSION_H
 #define MAVLINK_VERSION_H
 
-#define MAVLINK_BUILD_DATE "Tue Oct 08 2019"
+#define MAVLINK_BUILD_DATE "Sun Oct 20 2019"
 #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
  

autoquad/version.h

@@ -7,7 +7,7 @@
 #ifndef MAVLINK_VERSION_H
 #define MAVLINK_VERSION_H
 
-#define MAVLINK_BUILD_DATE "Tue Oct 08 2019"
+#define MAVLINK_BUILD_DATE "Sun Oct 20 2019"
 #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
  

common/version.h

@@ -7,7 +7,7 @@
 #ifndef MAVLINK_VERSION_H
 #define MAVLINK_VERSION_H
 
-#define MAVLINK_BUILD_DATE "Tue Oct 08 2019"
+#define MAVLINK_BUILD_DATE "Sun Oct 20 2019"
 #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
  

icarous/version.h

@@ -7,7 +7,7 @@
 #ifndef MAVLINK_VERSION_H
 #define MAVLINK_VERSION_H
 
-#define MAVLINK_BUILD_DATE "Tue Oct 08 2019"
+#define MAVLINK_BUILD_DATE "Sun Oct 20 2019"
 #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
  

matrixpilot/version.h

@@ -7,7 +7,7 @@
 #ifndef MAVLINK_VERSION_H
 #define MAVLINK_VERSION_H
 
-#define MAVLINK_BUILD_DATE "Tue Oct 08 2019"
+#define MAVLINK_BUILD_DATE "Sun Oct 20 2019"
 #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
  

message_definitions/common.xml

@@ -4059,7 +4059,7 @@
       <field type="uint8_t" name="rssi">Receive signal strength indicator in device-dependent units/scale. Values: [0-254], 255: invalid/unknown.</field>
     </message>
     <message id="36" name="SERVO_OUTPUT_RAW">
-      <description>The RAW values of the servo outputs (for RC input from the remote, use the RC_CHANNELS messages). The standard PPM modulation is as follows: 1000 microseconds: 0%, 2000 microseconds: 100%.</description>
+      <description>Superseded by ACTUATOR_OUTPUT_STATUS. The RAW values of the servo outputs (for RC input from the remote, use the RC_CHANNELS messages). The standard PPM modulation is as follows: 1000 microseconds: 0%, 2000 microseconds: 100%.</description>
       <field type="uint32_t" name="time_usec" units="us">Timestamp (UNIX Epoch time or time since system boot). The receiving end can infer timestamp format (since 1.1.1970 or since system boot) by checking for the magnitude the number.</field>
       <field type="uint8_t" name="port">Servo output port (set of 8 outputs = 1 port). Flight stacks running on Pixhawk should use: 0 = MAIN, 1 = AUX.</field>
       <field type="uint16_t" name="servo1_raw" units="us">Servo output 1 value</field>
@@ -5790,7 +5790,7 @@
       <field type="uint16_t[16]" name="voltages" units="mV">Individual cell voltages. Batteries with more 16 cells can use the cell_offset field to specify the cell offset for the array specified in the current message . Index values above the valid cell count for this battery should have the UINT16_MAX value.</field>
     </message>
     <message id="375" name="ACTUATOR_OUTPUT_STATUS">
-      <description>The raw values of the actuator outputs.</description>
+      <description>The raw values of the actuator outputs (e.g. on Pixhawk, from MAIN, AUX ports). This message supersedes SERVO_OUTPUT_RAW.</description>
       <field type="uint64_t" name="time_usec" units="us">Timestamp (since system boot).</field>
       <field type="uint32_t" name="active" display="bitmask">Active outputs</field>
       <field type="float[32]" name="actuator">Servo / motor output array values. Zero values indicate unused channels.</field>

minimal/version.h

@@ -7,7 +7,7 @@
 #ifndef MAVLINK_VERSION_H
 #define MAVLINK_VERSION_H
 
-#define MAVLINK_BUILD_DATE "Tue Oct 08 2019"
+#define MAVLINK_BUILD_DATE "Sun Oct 20 2019"
 #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 22
  

slugs/version.h

@@ -7,7 +7,7 @@
 #ifndef MAVLINK_VERSION_H
 #define MAVLINK_VERSION_H
 
-#define MAVLINK_BUILD_DATE "Tue Oct 08 2019"
+#define MAVLINK_BUILD_DATE "Sun Oct 20 2019"
 #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
  

standard/version.h

@@ -7,7 +7,7 @@
 #ifndef MAVLINK_VERSION_H
 #define MAVLINK_VERSION_H
 
-#define MAVLINK_BUILD_DATE "Tue Oct 08 2019"
+#define MAVLINK_BUILD_DATE "Sun Oct 20 2019"
 #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
  

test/version.h

@@ -7,7 +7,7 @@
 #ifndef MAVLINK_VERSION_H
 #define MAVLINK_VERSION_H
 
-#define MAVLINK_BUILD_DATE "Tue Oct 08 2019"
+#define MAVLINK_BUILD_DATE "Sun Oct 20 2019"
 #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 179
  

uAvionix/version.h

@@ -7,7 +7,7 @@
 #ifndef MAVLINK_VERSION_H
 #define MAVLINK_VERSION_H
 
-#define MAVLINK_BUILD_DATE "Tue Oct 08 2019"
+#define MAVLINK_BUILD_DATE "Sun Oct 20 2019"
 #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255