Commit 41c7fc07 authored by PX4BuildBot's avatar PX4BuildBot

autogenerated headers for rev...

autogenerated headers for rev https://github.com/mavlink/mavlink/tree/e85ccffc1146b650fbbb39438e02dc06d34ceb6b
parent bd80020a
...@@ -97,7 +97,7 @@ typedef enum MAV_CMD ...@@ -97,7 +97,7 @@ typedef enum MAV_CMD
MAV_CMD_DO_MOUNT_CONTROL=205, /* Mission command to control a camera or antenna mount |pitch depending on mount mode (degrees or degrees/second depending on pitch input).| roll depending on mount mode (degrees or degrees/second depending on roll input).| yaw depending on mount mode (degrees or degrees/second depending on yaw input).| altitude depending on mount mode.| latitude, set if appropriate mount mode.| longitude, set if appropriate mount mode.| Mount mode.| */ MAV_CMD_DO_MOUNT_CONTROL=205, /* Mission command to control a camera or antenna mount |pitch depending on mount mode (degrees or degrees/second depending on pitch input).| roll depending on mount mode (degrees or degrees/second depending on roll input).| yaw depending on mount mode (degrees or degrees/second depending on yaw input).| altitude depending on mount mode.| latitude, set if appropriate mount mode.| longitude, set if appropriate mount mode.| Mount mode.| */
MAV_CMD_DO_SET_CAM_TRIGG_DIST=206, /* Mission command to set camera trigger distance for this flight. The camera is triggered each time this distance is exceeded. This command can also be used to set the shutter integration time for the camera. |Camera trigger distance. 0 to stop triggering.| Camera shutter integration time. -1 or 0 to ignore| Trigger camera once immediately. (0 = no trigger, 1 = trigger)| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_SET_CAM_TRIGG_DIST=206, /* Mission command to set camera trigger distance for this flight. The camera is triggered each time this distance is exceeded. This command can also be used to set the shutter integration time for the camera. |Camera trigger distance. 0 to stop triggering.| Camera shutter integration time. -1 or 0 to ignore| Trigger camera once immediately. (0 = no trigger, 1 = trigger)| Empty| Empty| Empty| Empty| */
MAV_CMD_DO_FENCE_ENABLE=207, /* Mission command to enable the geofence |enable? (0=disable, 1=enable, 2=disable_floor_only)| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_FENCE_ENABLE=207, /* Mission command to enable the geofence |enable? (0=disable, 1=enable, 2=disable_floor_only)| Empty| Empty| Empty| Empty| Empty| Empty| */
MAV_CMD_DO_PARACHUTE=208, /* Mission command to trigger a parachute |Action| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_PARACHUTE=208, /* Mission item/command to release a parachute or enable/disable auto release. |Action| Empty| Empty| Empty| Empty| Empty| Empty| */
MAV_CMD_DO_MOTOR_TEST=209, /* Mission command to perform motor test. |Motor instance number. (from 1 to max number of motors on the vehicle)| Throttle type.| Throttle.| Timeout.| Motor count. (number of motors to test to test in sequence, waiting for the timeout above between them; 0=1 motor, 1=1 motor, 2=2 motors...)| Motor test order.| Empty| */ MAV_CMD_DO_MOTOR_TEST=209, /* Mission command to perform motor test. |Motor instance number. (from 1 to max number of motors on the vehicle)| Throttle type.| Throttle.| Timeout.| Motor count. (number of motors to test to test in sequence, waiting for the timeout above between them; 0=1 motor, 1=1 motor, 2=2 motors...)| Motor test order.| Empty| */
MAV_CMD_DO_INVERTED_FLIGHT=210, /* Change to/from inverted flight. |Inverted flight. (0=normal, 1=inverted)| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_INVERTED_FLIGHT=210, /* Change to/from inverted flight. |Inverted flight. (0=normal, 1=inverted)| Empty| Empty| Empty| Empty| Empty| Empty| */
MAV_CMD_NAV_SET_YAW_SPEED=213, /* Sets a desired vehicle turn angle and speed change. |Yaw angle to adjust steering by.| Speed.| Final angle. (0=absolute, 1=relative)| Empty| Empty| Empty| Empty| */ MAV_CMD_NAV_SET_YAW_SPEED=213, /* Sets a desired vehicle turn angle and speed change. |Yaw angle to adjust steering by.| Speed.| Final angle. (0=absolute, 1=relative)| Empty| Empty| Empty| Empty| */
......
...@@ -7,7 +7,7 @@ ...@@ -7,7 +7,7 @@
#ifndef MAVLINK_VERSION_H #ifndef MAVLINK_VERSION_H
#define MAVLINK_VERSION_H #define MAVLINK_VERSION_H
#define MAVLINK_BUILD_DATE "Mon Jun 29 2020" #define MAVLINK_BUILD_DATE "Wed Jul 01 2020"
#define MAVLINK_WIRE_PROTOCOL_VERSION "2.0" #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
#define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
......
...@@ -115,7 +115,7 @@ typedef enum MAV_CMD ...@@ -115,7 +115,7 @@ typedef enum MAV_CMD
MAV_CMD_DO_MOUNT_CONTROL=205, /* Mission command to control a camera or antenna mount |pitch depending on mount mode (degrees or degrees/second depending on pitch input).| roll depending on mount mode (degrees or degrees/second depending on roll input).| yaw depending on mount mode (degrees or degrees/second depending on yaw input).| altitude depending on mount mode.| latitude, set if appropriate mount mode.| longitude, set if appropriate mount mode.| Mount mode.| */ MAV_CMD_DO_MOUNT_CONTROL=205, /* Mission command to control a camera or antenna mount |pitch depending on mount mode (degrees or degrees/second depending on pitch input).| roll depending on mount mode (degrees or degrees/second depending on roll input).| yaw depending on mount mode (degrees or degrees/second depending on yaw input).| altitude depending on mount mode.| latitude, set if appropriate mount mode.| longitude, set if appropriate mount mode.| Mount mode.| */
MAV_CMD_DO_SET_CAM_TRIGG_DIST=206, /* Mission command to set camera trigger distance for this flight. The camera is triggered each time this distance is exceeded. This command can also be used to set the shutter integration time for the camera. |Camera trigger distance. 0 to stop triggering.| Camera shutter integration time. -1 or 0 to ignore| Trigger camera once immediately. (0 = no trigger, 1 = trigger)| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_SET_CAM_TRIGG_DIST=206, /* Mission command to set camera trigger distance for this flight. The camera is triggered each time this distance is exceeded. This command can also be used to set the shutter integration time for the camera. |Camera trigger distance. 0 to stop triggering.| Camera shutter integration time. -1 or 0 to ignore| Trigger camera once immediately. (0 = no trigger, 1 = trigger)| Empty| Empty| Empty| Empty| */
MAV_CMD_DO_FENCE_ENABLE=207, /* Mission command to enable the geofence |enable? (0=disable, 1=enable, 2=disable_floor_only)| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_FENCE_ENABLE=207, /* Mission command to enable the geofence |enable? (0=disable, 1=enable, 2=disable_floor_only)| Empty| Empty| Empty| Empty| Empty| Empty| */
MAV_CMD_DO_PARACHUTE=208, /* Mission command to trigger a parachute |Action| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_PARACHUTE=208, /* Mission item/command to release a parachute or enable/disable auto release. |Action| Empty| Empty| Empty| Empty| Empty| Empty| */
MAV_CMD_DO_MOTOR_TEST=209, /* Mission command to perform motor test. |Motor instance number. (from 1 to max number of motors on the vehicle)| Throttle type.| Throttle.| Timeout.| Motor count. (number of motors to test to test in sequence, waiting for the timeout above between them; 0=1 motor, 1=1 motor, 2=2 motors...)| Motor test order.| Empty| */ MAV_CMD_DO_MOTOR_TEST=209, /* Mission command to perform motor test. |Motor instance number. (from 1 to max number of motors on the vehicle)| Throttle type.| Throttle.| Timeout.| Motor count. (number of motors to test to test in sequence, waiting for the timeout above between them; 0=1 motor, 1=1 motor, 2=2 motors...)| Motor test order.| Empty| */
MAV_CMD_DO_INVERTED_FLIGHT=210, /* Change to/from inverted flight. |Inverted flight. (0=normal, 1=inverted)| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_INVERTED_FLIGHT=210, /* Change to/from inverted flight. |Inverted flight. (0=normal, 1=inverted)| Empty| Empty| Empty| Empty| Empty| Empty| */
MAV_CMD_DO_GRIPPER=211, /* Mission command to operate EPM gripper. |Gripper number (a number from 1 to max number of grippers on the vehicle).| Gripper action (0=release, 1=grab. See GRIPPER_ACTIONS enum).| Empty.| Empty.| Empty.| Empty.| Empty.| */ MAV_CMD_DO_GRIPPER=211, /* Mission command to operate EPM gripper. |Gripper number (a number from 1 to max number of grippers on the vehicle).| Gripper action (0=release, 1=grab. See GRIPPER_ACTIONS enum).| Empty.| Empty.| Empty.| Empty.| Empty.| */
......
...@@ -7,7 +7,7 @@ ...@@ -7,7 +7,7 @@
#ifndef MAVLINK_VERSION_H #ifndef MAVLINK_VERSION_H
#define MAVLINK_VERSION_H #define MAVLINK_VERSION_H
#define MAVLINK_BUILD_DATE "Mon Jun 29 2020" #define MAVLINK_BUILD_DATE "Wed Jul 01 2020"
#define MAVLINK_WIRE_PROTOCOL_VERSION "2.0" #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
#define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
......
...@@ -141,7 +141,7 @@ typedef enum MAV_CMD ...@@ -141,7 +141,7 @@ typedef enum MAV_CMD
MAV_CMD_DO_MOUNT_CONTROL=205, /* Mission command to control a camera or antenna mount |pitch depending on mount mode (degrees or degrees/second depending on pitch input).| roll depending on mount mode (degrees or degrees/second depending on roll input).| yaw depending on mount mode (degrees or degrees/second depending on yaw input).| altitude depending on mount mode.| latitude, set if appropriate mount mode.| longitude, set if appropriate mount mode.| Mount mode.| */ MAV_CMD_DO_MOUNT_CONTROL=205, /* Mission command to control a camera or antenna mount |pitch depending on mount mode (degrees or degrees/second depending on pitch input).| roll depending on mount mode (degrees or degrees/second depending on roll input).| yaw depending on mount mode (degrees or degrees/second depending on yaw input).| altitude depending on mount mode.| latitude, set if appropriate mount mode.| longitude, set if appropriate mount mode.| Mount mode.| */
MAV_CMD_DO_SET_CAM_TRIGG_DIST=206, /* Mission command to set camera trigger distance for this flight. The camera is triggered each time this distance is exceeded. This command can also be used to set the shutter integration time for the camera. |Camera trigger distance. 0 to stop triggering.| Camera shutter integration time. -1 or 0 to ignore| Trigger camera once immediately. (0 = no trigger, 1 = trigger)| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_SET_CAM_TRIGG_DIST=206, /* Mission command to set camera trigger distance for this flight. The camera is triggered each time this distance is exceeded. This command can also be used to set the shutter integration time for the camera. |Camera trigger distance. 0 to stop triggering.| Camera shutter integration time. -1 or 0 to ignore| Trigger camera once immediately. (0 = no trigger, 1 = trigger)| Empty| Empty| Empty| Empty| */
MAV_CMD_DO_FENCE_ENABLE=207, /* Mission command to enable the geofence |enable? (0=disable, 1=enable, 2=disable_floor_only)| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_FENCE_ENABLE=207, /* Mission command to enable the geofence |enable? (0=disable, 1=enable, 2=disable_floor_only)| Empty| Empty| Empty| Empty| Empty| Empty| */
MAV_CMD_DO_PARACHUTE=208, /* Mission command to trigger a parachute |Action| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_PARACHUTE=208, /* Mission item/command to release a parachute or enable/disable auto release. |Action| Empty| Empty| Empty| Empty| Empty| Empty| */
MAV_CMD_DO_MOTOR_TEST=209, /* Mission command to perform motor test. |Motor instance number. (from 1 to max number of motors on the vehicle)| Throttle type.| Throttle.| Timeout.| Motor count. (number of motors to test to test in sequence, waiting for the timeout above between them; 0=1 motor, 1=1 motor, 2=2 motors...)| Motor test order.| Empty| */ MAV_CMD_DO_MOTOR_TEST=209, /* Mission command to perform motor test. |Motor instance number. (from 1 to max number of motors on the vehicle)| Throttle type.| Throttle.| Timeout.| Motor count. (number of motors to test to test in sequence, waiting for the timeout above between them; 0=1 motor, 1=1 motor, 2=2 motors...)| Motor test order.| Empty| */
MAV_CMD_DO_INVERTED_FLIGHT=210, /* Change to/from inverted flight. |Inverted flight. (0=normal, 1=inverted)| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_INVERTED_FLIGHT=210, /* Change to/from inverted flight. |Inverted flight. (0=normal, 1=inverted)| Empty| Empty| Empty| Empty| Empty| Empty| */
MAV_CMD_NAV_SET_YAW_SPEED=213, /* Sets a desired vehicle turn angle and speed change. |Yaw angle to adjust steering by.| Speed.| Final angle. (0=absolute, 1=relative)| Empty| Empty| Empty| Empty| */ MAV_CMD_NAV_SET_YAW_SPEED=213, /* Sets a desired vehicle turn angle and speed change. |Yaw angle to adjust steering by.| Speed.| Final angle. (0=absolute, 1=relative)| Empty| Empty| Empty| Empty| */
......
...@@ -7,7 +7,7 @@ ...@@ -7,7 +7,7 @@
#ifndef MAVLINK_VERSION_H #ifndef MAVLINK_VERSION_H
#define MAVLINK_VERSION_H #define MAVLINK_VERSION_H
#define MAVLINK_BUILD_DATE "Mon Jun 29 2020" #define MAVLINK_BUILD_DATE "Wed Jul 01 2020"
#define MAVLINK_WIRE_PROTOCOL_VERSION "2.0" #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
#define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
......
...@@ -760,7 +760,7 @@ typedef enum MAV_CMD ...@@ -760,7 +760,7 @@ typedef enum MAV_CMD
MAV_CMD_DO_MOUNT_CONTROL=205, /* Mission command to control a camera or antenna mount |pitch depending on mount mode (degrees or degrees/second depending on pitch input).| roll depending on mount mode (degrees or degrees/second depending on roll input).| yaw depending on mount mode (degrees or degrees/second depending on yaw input).| altitude depending on mount mode.| latitude, set if appropriate mount mode.| longitude, set if appropriate mount mode.| Mount mode.| */ MAV_CMD_DO_MOUNT_CONTROL=205, /* Mission command to control a camera or antenna mount |pitch depending on mount mode (degrees or degrees/second depending on pitch input).| roll depending on mount mode (degrees or degrees/second depending on roll input).| yaw depending on mount mode (degrees or degrees/second depending on yaw input).| altitude depending on mount mode.| latitude, set if appropriate mount mode.| longitude, set if appropriate mount mode.| Mount mode.| */
MAV_CMD_DO_SET_CAM_TRIGG_DIST=206, /* Mission command to set camera trigger distance for this flight. The camera is triggered each time this distance is exceeded. This command can also be used to set the shutter integration time for the camera. |Camera trigger distance. 0 to stop triggering.| Camera shutter integration time. -1 or 0 to ignore| Trigger camera once immediately. (0 = no trigger, 1 = trigger)| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_SET_CAM_TRIGG_DIST=206, /* Mission command to set camera trigger distance for this flight. The camera is triggered each time this distance is exceeded. This command can also be used to set the shutter integration time for the camera. |Camera trigger distance. 0 to stop triggering.| Camera shutter integration time. -1 or 0 to ignore| Trigger camera once immediately. (0 = no trigger, 1 = trigger)| Empty| Empty| Empty| Empty| */
MAV_CMD_DO_FENCE_ENABLE=207, /* Mission command to enable the geofence |enable? (0=disable, 1=enable, 2=disable_floor_only)| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_FENCE_ENABLE=207, /* Mission command to enable the geofence |enable? (0=disable, 1=enable, 2=disable_floor_only)| Empty| Empty| Empty| Empty| Empty| Empty| */
MAV_CMD_DO_PARACHUTE=208, /* Mission command to trigger a parachute |Action| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_PARACHUTE=208, /* Mission item/command to release a parachute or enable/disable auto release. |Action| Empty| Empty| Empty| Empty| Empty| Empty| */
MAV_CMD_DO_MOTOR_TEST=209, /* Mission command to perform motor test. |Motor instance number. (from 1 to max number of motors on the vehicle)| Throttle type.| Throttle.| Timeout.| Motor count. (number of motors to test to test in sequence, waiting for the timeout above between them; 0=1 motor, 1=1 motor, 2=2 motors...)| Motor test order.| Empty| */ MAV_CMD_DO_MOTOR_TEST=209, /* Mission command to perform motor test. |Motor instance number. (from 1 to max number of motors on the vehicle)| Throttle type.| Throttle.| Timeout.| Motor count. (number of motors to test to test in sequence, waiting for the timeout above between them; 0=1 motor, 1=1 motor, 2=2 motors...)| Motor test order.| Empty| */
MAV_CMD_DO_INVERTED_FLIGHT=210, /* Change to/from inverted flight. |Inverted flight. (0=normal, 1=inverted)| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_INVERTED_FLIGHT=210, /* Change to/from inverted flight. |Inverted flight. (0=normal, 1=inverted)| Empty| Empty| Empty| Empty| Empty| Empty| */
MAV_CMD_NAV_SET_YAW_SPEED=213, /* Sets a desired vehicle turn angle and speed change. |Yaw angle to adjust steering by.| Speed.| Final angle. (0=absolute, 1=relative)| Empty| Empty| Empty| Empty| */ MAV_CMD_NAV_SET_YAW_SPEED=213, /* Sets a desired vehicle turn angle and speed change. |Yaw angle to adjust steering by.| Speed.| Final angle. (0=absolute, 1=relative)| Empty| Empty| Empty| Empty| */
...@@ -1740,14 +1740,14 @@ typedef enum PRECISION_LAND_MODE ...@@ -1740,14 +1740,14 @@ typedef enum PRECISION_LAND_MODE
} PRECISION_LAND_MODE; } PRECISION_LAND_MODE;
#endif #endif
/** @brief */ /** @brief Parachute actions. Trigger release and enable/disable auto-release. */
#ifndef HAVE_ENUM_PARACHUTE_ACTION #ifndef HAVE_ENUM_PARACHUTE_ACTION
#define HAVE_ENUM_PARACHUTE_ACTION #define HAVE_ENUM_PARACHUTE_ACTION
typedef enum PARACHUTE_ACTION typedef enum PARACHUTE_ACTION
{ {
PARACHUTE_DISABLE=0, /* Disable parachute release. | */ PARACHUTE_DISABLE=0, /* Disable auto-release of parachute (i.e. release triggered by crash detectors). | */
PARACHUTE_ENABLE=1, /* Enable parachute release. | */ PARACHUTE_ENABLE=1, /* Enable auto-release of parachute. | */
PARACHUTE_RELEASE=2, /* Release parachute. | */ PARACHUTE_RELEASE=2, /* Release parachute and kill motors. | */
PARACHUTE_ACTION_ENUM_END=3, /* | */ PARACHUTE_ACTION_ENUM_END=3, /* | */
} PARACHUTE_ACTION; } PARACHUTE_ACTION;
#endif #endif
......
...@@ -7,7 +7,7 @@ ...@@ -7,7 +7,7 @@
#ifndef MAVLINK_VERSION_H #ifndef MAVLINK_VERSION_H
#define MAVLINK_VERSION_H #define MAVLINK_VERSION_H
#define MAVLINK_BUILD_DATE "Mon Jun 29 2020" #define MAVLINK_BUILD_DATE "Wed Jul 01 2020"
#define MAVLINK_WIRE_PROTOCOL_VERSION "2.0" #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
#define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
......
...@@ -7,7 +7,7 @@ ...@@ -7,7 +7,7 @@
#ifndef MAVLINK_VERSION_H #ifndef MAVLINK_VERSION_H
#define MAVLINK_VERSION_H #define MAVLINK_VERSION_H
#define MAVLINK_BUILD_DATE "Mon Jun 29 2020" #define MAVLINK_BUILD_DATE "Wed Jul 01 2020"
#define MAVLINK_WIRE_PROTOCOL_VERSION "2.0" #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
#define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
......
...@@ -114,7 +114,7 @@ typedef enum MAV_CMD ...@@ -114,7 +114,7 @@ typedef enum MAV_CMD
MAV_CMD_DO_MOUNT_CONTROL=205, /* Mission command to control a camera or antenna mount |pitch depending on mount mode (degrees or degrees/second depending on pitch input).| roll depending on mount mode (degrees or degrees/second depending on roll input).| yaw depending on mount mode (degrees or degrees/second depending on yaw input).| altitude depending on mount mode.| latitude, set if appropriate mount mode.| longitude, set if appropriate mount mode.| Mount mode.| */ MAV_CMD_DO_MOUNT_CONTROL=205, /* Mission command to control a camera or antenna mount |pitch depending on mount mode (degrees or degrees/second depending on pitch input).| roll depending on mount mode (degrees or degrees/second depending on roll input).| yaw depending on mount mode (degrees or degrees/second depending on yaw input).| altitude depending on mount mode.| latitude, set if appropriate mount mode.| longitude, set if appropriate mount mode.| Mount mode.| */
MAV_CMD_DO_SET_CAM_TRIGG_DIST=206, /* Mission command to set camera trigger distance for this flight. The camera is triggered each time this distance is exceeded. This command can also be used to set the shutter integration time for the camera. |Camera trigger distance. 0 to stop triggering.| Camera shutter integration time. -1 or 0 to ignore| Trigger camera once immediately. (0 = no trigger, 1 = trigger)| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_SET_CAM_TRIGG_DIST=206, /* Mission command to set camera trigger distance for this flight. The camera is triggered each time this distance is exceeded. This command can also be used to set the shutter integration time for the camera. |Camera trigger distance. 0 to stop triggering.| Camera shutter integration time. -1 or 0 to ignore| Trigger camera once immediately. (0 = no trigger, 1 = trigger)| Empty| Empty| Empty| Empty| */
MAV_CMD_DO_FENCE_ENABLE=207, /* Mission command to enable the geofence |enable? (0=disable, 1=enable, 2=disable_floor_only)| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_FENCE_ENABLE=207, /* Mission command to enable the geofence |enable? (0=disable, 1=enable, 2=disable_floor_only)| Empty| Empty| Empty| Empty| Empty| Empty| */
MAV_CMD_DO_PARACHUTE=208, /* Mission command to trigger a parachute |Action| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_PARACHUTE=208, /* Mission item/command to release a parachute or enable/disable auto release. |Action| Empty| Empty| Empty| Empty| Empty| Empty| */
MAV_CMD_DO_MOTOR_TEST=209, /* Mission command to perform motor test. |Motor instance number. (from 1 to max number of motors on the vehicle)| Throttle type.| Throttle.| Timeout.| Motor count. (number of motors to test to test in sequence, waiting for the timeout above between them; 0=1 motor, 1=1 motor, 2=2 motors...)| Motor test order.| Empty| */ MAV_CMD_DO_MOTOR_TEST=209, /* Mission command to perform motor test. |Motor instance number. (from 1 to max number of motors on the vehicle)| Throttle type.| Throttle.| Timeout.| Motor count. (number of motors to test to test in sequence, waiting for the timeout above between them; 0=1 motor, 1=1 motor, 2=2 motors...)| Motor test order.| Empty| */
MAV_CMD_DO_INVERTED_FLIGHT=210, /* Change to/from inverted flight. |Inverted flight. (0=normal, 1=inverted)| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_INVERTED_FLIGHT=210, /* Change to/from inverted flight. |Inverted flight. (0=normal, 1=inverted)| Empty| Empty| Empty| Empty| Empty| Empty| */
MAV_CMD_NAV_SET_YAW_SPEED=213, /* Sets a desired vehicle turn angle and speed change. |Yaw angle to adjust steering by.| Speed.| Final angle. (0=absolute, 1=relative)| Empty| Empty| Empty| Empty| */ MAV_CMD_NAV_SET_YAW_SPEED=213, /* Sets a desired vehicle turn angle and speed change. |Yaw angle to adjust steering by.| Speed.| Final angle. (0=absolute, 1=relative)| Empty| Empty| Empty| Empty| */
......
...@@ -7,7 +7,7 @@ ...@@ -7,7 +7,7 @@
#ifndef MAVLINK_VERSION_H #ifndef MAVLINK_VERSION_H
#define MAVLINK_VERSION_H #define MAVLINK_VERSION_H
#define MAVLINK_BUILD_DATE "Mon Jun 29 2020" #define MAVLINK_BUILD_DATE "Wed Jul 01 2020"
#define MAVLINK_WIRE_PROTOCOL_VERSION "2.0" #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
#define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
......
...@@ -1899,7 +1899,7 @@ ...@@ -1899,7 +1899,7 @@
<param index="7">Empty</param> <param index="7">Empty</param>
</entry> </entry>
<entry value="208" name="MAV_CMD_DO_PARACHUTE" hasLocation="false" isDestination="false"> <entry value="208" name="MAV_CMD_DO_PARACHUTE" hasLocation="false" isDestination="false">
<description>Mission command to trigger a parachute</description> <description>Mission item/command to release a parachute or enable/disable auto release.</description>
<param index="1" label="Action" enum="PARACHUTE_ACTION">Action</param> <param index="1" label="Action" enum="PARACHUTE_ACTION">Action</param>
<param index="2">Empty</param> <param index="2">Empty</param>
<param index="3">Empty</param> <param index="3">Empty</param>
...@@ -3969,14 +3969,15 @@ ...@@ -3969,14 +3969,15 @@
</enum> </enum>
<!-- parachute action enum --> <!-- parachute action enum -->
<enum name="PARACHUTE_ACTION"> <enum name="PARACHUTE_ACTION">
<description>Parachute actions. Trigger release and enable/disable auto-release.</description>
<entry value="0" name="PARACHUTE_DISABLE"> <entry value="0" name="PARACHUTE_DISABLE">
<description>Disable parachute release.</description> <description>Disable auto-release of parachute (i.e. release triggered by crash detectors).</description>
</entry> </entry>
<entry value="1" name="PARACHUTE_ENABLE"> <entry value="1" name="PARACHUTE_ENABLE">
<description>Enable parachute release.</description> <description>Enable auto-release of parachute.</description>
</entry> </entry>
<entry value="2" name="PARACHUTE_RELEASE"> <entry value="2" name="PARACHUTE_RELEASE">
<description>Release parachute.</description> <description>Release parachute and kill motors.</description>
</entry> </entry>
</enum> </enum>
<enum name="MAV_TUNNEL_PAYLOAD_TYPE"> <enum name="MAV_TUNNEL_PAYLOAD_TYPE">
......
...@@ -7,7 +7,7 @@ ...@@ -7,7 +7,7 @@
#ifndef MAVLINK_VERSION_H #ifndef MAVLINK_VERSION_H
#define MAVLINK_VERSION_H #define MAVLINK_VERSION_H
#define MAVLINK_BUILD_DATE "Mon Jun 29 2020" #define MAVLINK_BUILD_DATE "Wed Jul 01 2020"
#define MAVLINK_WIRE_PROTOCOL_VERSION "2.0" #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
#define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 22 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 22
......
...@@ -97,7 +97,7 @@ typedef enum MAV_CMD ...@@ -97,7 +97,7 @@ typedef enum MAV_CMD
MAV_CMD_DO_MOUNT_CONTROL=205, /* Mission command to control a camera or antenna mount |pitch depending on mount mode (degrees or degrees/second depending on pitch input).| roll depending on mount mode (degrees or degrees/second depending on roll input).| yaw depending on mount mode (degrees or degrees/second depending on yaw input).| altitude depending on mount mode.| latitude, set if appropriate mount mode.| longitude, set if appropriate mount mode.| Mount mode.| */ MAV_CMD_DO_MOUNT_CONTROL=205, /* Mission command to control a camera or antenna mount |pitch depending on mount mode (degrees or degrees/second depending on pitch input).| roll depending on mount mode (degrees or degrees/second depending on roll input).| yaw depending on mount mode (degrees or degrees/second depending on yaw input).| altitude depending on mount mode.| latitude, set if appropriate mount mode.| longitude, set if appropriate mount mode.| Mount mode.| */
MAV_CMD_DO_SET_CAM_TRIGG_DIST=206, /* Mission command to set camera trigger distance for this flight. The camera is triggered each time this distance is exceeded. This command can also be used to set the shutter integration time for the camera. |Camera trigger distance. 0 to stop triggering.| Camera shutter integration time. -1 or 0 to ignore| Trigger camera once immediately. (0 = no trigger, 1 = trigger)| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_SET_CAM_TRIGG_DIST=206, /* Mission command to set camera trigger distance for this flight. The camera is triggered each time this distance is exceeded. This command can also be used to set the shutter integration time for the camera. |Camera trigger distance. 0 to stop triggering.| Camera shutter integration time. -1 or 0 to ignore| Trigger camera once immediately. (0 = no trigger, 1 = trigger)| Empty| Empty| Empty| Empty| */
MAV_CMD_DO_FENCE_ENABLE=207, /* Mission command to enable the geofence |enable? (0=disable, 1=enable, 2=disable_floor_only)| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_FENCE_ENABLE=207, /* Mission command to enable the geofence |enable? (0=disable, 1=enable, 2=disable_floor_only)| Empty| Empty| Empty| Empty| Empty| Empty| */
MAV_CMD_DO_PARACHUTE=208, /* Mission command to trigger a parachute |Action| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_PARACHUTE=208, /* Mission item/command to release a parachute or enable/disable auto release. |Action| Empty| Empty| Empty| Empty| Empty| Empty| */
MAV_CMD_DO_MOTOR_TEST=209, /* Mission command to perform motor test. |Motor instance number. (from 1 to max number of motors on the vehicle)| Throttle type.| Throttle.| Timeout.| Motor count. (number of motors to test to test in sequence, waiting for the timeout above between them; 0=1 motor, 1=1 motor, 2=2 motors...)| Motor test order.| Empty| */ MAV_CMD_DO_MOTOR_TEST=209, /* Mission command to perform motor test. |Motor instance number. (from 1 to max number of motors on the vehicle)| Throttle type.| Throttle.| Timeout.| Motor count. (number of motors to test to test in sequence, waiting for the timeout above between them; 0=1 motor, 1=1 motor, 2=2 motors...)| Motor test order.| Empty| */
MAV_CMD_DO_INVERTED_FLIGHT=210, /* Change to/from inverted flight. |Inverted flight. (0=normal, 1=inverted)| Empty| Empty| Empty| Empty| Empty| Empty| */ MAV_CMD_DO_INVERTED_FLIGHT=210, /* Change to/from inverted flight. |Inverted flight. (0=normal, 1=inverted)| Empty| Empty| Empty| Empty| Empty| Empty| */
MAV_CMD_NAV_SET_YAW_SPEED=213, /* Sets a desired vehicle turn angle and speed change. |Yaw angle to adjust steering by.| Speed.| Final angle. (0=absolute, 1=relative)| Empty| Empty| Empty| Empty| */ MAV_CMD_NAV_SET_YAW_SPEED=213, /* Sets a desired vehicle turn angle and speed change. |Yaw angle to adjust steering by.| Speed.| Final angle. (0=absolute, 1=relative)| Empty| Empty| Empty| Empty| */
......
...@@ -7,7 +7,7 @@ ...@@ -7,7 +7,7 @@
#ifndef MAVLINK_VERSION_H #ifndef MAVLINK_VERSION_H
#define MAVLINK_VERSION_H #define MAVLINK_VERSION_H
#define MAVLINK_BUILD_DATE "Mon Jun 29 2020" #define MAVLINK_BUILD_DATE "Wed Jul 01 2020"
#define MAVLINK_WIRE_PROTOCOL_VERSION "2.0" #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
#define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
......
...@@ -7,7 +7,7 @@ ...@@ -7,7 +7,7 @@
#ifndef MAVLINK_VERSION_H #ifndef MAVLINK_VERSION_H
#define MAVLINK_VERSION_H #define MAVLINK_VERSION_H
#define MAVLINK_BUILD_DATE "Mon Jun 29 2020" #define MAVLINK_BUILD_DATE "Wed Jul 01 2020"
#define MAVLINK_WIRE_PROTOCOL_VERSION "2.0" #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
#define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
......
...@@ -7,7 +7,7 @@ ...@@ -7,7 +7,7 @@
#ifndef MAVLINK_VERSION_H #ifndef MAVLINK_VERSION_H
#define MAVLINK_VERSION_H #define MAVLINK_VERSION_H
#define MAVLINK_BUILD_DATE "Mon Jun 29 2020" #define MAVLINK_BUILD_DATE "Wed Jul 01 2020"
#define MAVLINK_WIRE_PROTOCOL_VERSION "2.0" #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
#define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 179 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 179
......
...@@ -7,7 +7,7 @@ ...@@ -7,7 +7,7 @@
#ifndef MAVLINK_VERSION_H #ifndef MAVLINK_VERSION_H
#define MAVLINK_VERSION_H #define MAVLINK_VERSION_H
#define MAVLINK_BUILD_DATE "Mon Jun 29 2020" #define MAVLINK_BUILD_DATE "Wed Jul 01 2020"
#define MAVLINK_WIRE_PROTOCOL_VERSION "2.0" #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
#define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment