autogenerated headers for rev...

autogenerated headers for rev https://github.com/mavlink/mavlink/tree/bfcf544936e42ff97bb1e73ad30ef2dc1052f7c3

ASLUAV/ASLUAV.h

@@ -88,6 +88,7 @@ typedef enum MAV_CMD
    MAV_CMD_DO_SET_ROI_LOCATION=195, /* Sets the region of interest (ROI) to a location. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Empty| Empty| Empty| Empty| Latitude| Longitude| Altitude|  */
    MAV_CMD_DO_SET_ROI_WPNEXT_OFFSET=196, /* Sets the region of interest (ROI) to be toward next waypoint, with optional pitch/roll/yaw offset. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Empty| Empty| Empty| Empty| pitch offset from next waypoint| roll offset from next waypoint| yaw offset from next waypoint|  */
    MAV_CMD_DO_SET_ROI_NONE=197, /* Cancels any previous ROI command returning the vehicle/sensors to default flight characteristics. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Empty| Empty| Empty| Empty| Empty| Empty| Empty|  */
+   MAV_CMD_DO_SET_ROI_SYSID=198, /* Mount tracks system with specified system ID. Determination of target vehicle position may be done with GLOBAL_POSITION_INT or any other means. |sysid| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
    MAV_CMD_DO_CONTROL_VIDEO=200, /* Control onboard camera system. |Camera ID (-1 for all)| Transmission: 0: disabled, 1: enabled compressed, 2: enabled raw| Transmission mode: 0: video stream, >0: single images every n seconds| Recording: 0: disabled, 1: enabled compressed, 2: enabled raw| Empty| Empty| Empty|  */
    MAV_CMD_DO_SET_ROI=201, /* Sets the region of interest (ROI) for a sensor set or the vehicle itself. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Region of interest mode.| Waypoint index/ target ID (depends on param 1).| Region of interest index. (allows a vehicle to manage multiple ROI's)| Empty| MAV_ROI_WPNEXT: pitch offset from next waypoint, MAV_ROI_LOCATION: latitude| MAV_ROI_WPNEXT: roll offset from next waypoint, MAV_ROI_LOCATION: longitude| MAV_ROI_WPNEXT: yaw offset from next waypoint, MAV_ROI_LOCATION: altitude|  */
    MAV_CMD_DO_DIGICAM_CONFIGURE=202, /* Configure digital camera. This is a fallback message for systems that have not yet implemented PARAM_EXT_XXX messages and camera definition files (see https://mavlink.io/en/services/camera_def.html ). |Modes: P, TV, AV, M, Etc.| Shutter speed: Divisor number for one second.| Aperture: F stop number.| ISO number e.g. 80, 100, 200, Etc.| Exposure type enumerator.| Command Identity.| Main engine cut-off time before camera trigger. (0 means no cut-off)|  */

ASLUAV/version.h

@@ -7,7 +7,7 @@
 #ifndef MAVLINK_VERSION_H
 #define MAVLINK_VERSION_H
 
-#define MAVLINK_BUILD_DATE "Mon Dec 09 2019"
+#define MAVLINK_BUILD_DATE "Tue Dec 10 2019"
 #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
  

ardupilotmega/ardupilotmega.h

@@ -106,6 +106,7 @@ typedef enum MAV_CMD
    MAV_CMD_DO_SET_ROI_LOCATION=195, /* Sets the region of interest (ROI) to a location. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Empty| Empty| Empty| Empty| Latitude| Longitude| Altitude|  */
    MAV_CMD_DO_SET_ROI_WPNEXT_OFFSET=196, /* Sets the region of interest (ROI) to be toward next waypoint, with optional pitch/roll/yaw offset. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Empty| Empty| Empty| Empty| pitch offset from next waypoint| roll offset from next waypoint| yaw offset from next waypoint|  */
    MAV_CMD_DO_SET_ROI_NONE=197, /* Cancels any previous ROI command returning the vehicle/sensors to default flight characteristics. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Empty| Empty| Empty| Empty| Empty| Empty| Empty|  */
+   MAV_CMD_DO_SET_ROI_SYSID=198, /* Mount tracks system with specified system ID. Determination of target vehicle position may be done with GLOBAL_POSITION_INT or any other means. |sysid| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
    MAV_CMD_DO_CONTROL_VIDEO=200, /* Control onboard camera system. |Camera ID (-1 for all)| Transmission: 0: disabled, 1: enabled compressed, 2: enabled raw| Transmission mode: 0: video stream, >0: single images every n seconds| Recording: 0: disabled, 1: enabled compressed, 2: enabled raw| Empty| Empty| Empty|  */
    MAV_CMD_DO_SET_ROI=201, /* Sets the region of interest (ROI) for a sensor set or the vehicle itself. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Region of interest mode.| Waypoint index/ target ID (depends on param 1).| Region of interest index. (allows a vehicle to manage multiple ROI's)| Empty| MAV_ROI_WPNEXT: pitch offset from next waypoint, MAV_ROI_LOCATION: latitude| MAV_ROI_WPNEXT: roll offset from next waypoint, MAV_ROI_LOCATION: longitude| MAV_ROI_WPNEXT: yaw offset from next waypoint, MAV_ROI_LOCATION: altitude|  */
    MAV_CMD_DO_DIGICAM_CONFIGURE=202, /* Configure digital camera. This is a fallback message for systems that have not yet implemented PARAM_EXT_XXX messages and camera definition files (see https://mavlink.io/en/services/camera_def.html ). |Modes: P, TV, AV, M, Etc.| Shutter speed: Divisor number for one second.| Aperture: F stop number.| ISO number e.g. 80, 100, 200, Etc.| Exposure type enumerator.| Command Identity.| Main engine cut-off time before camera trigger. (0 means no cut-off)|  */

ardupilotmega/version.h

@@ -7,7 +7,7 @@
 #ifndef MAVLINK_VERSION_H
 #define MAVLINK_VERSION_H
 
-#define MAVLINK_BUILD_DATE "Mon Dec 09 2019"
+#define MAVLINK_BUILD_DATE "Tue Dec 10 2019"
 #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
  

autoquad/autoquad.h

@@ -132,6 +132,7 @@ typedef enum MAV_CMD
    MAV_CMD_DO_SET_ROI_LOCATION=195, /* Sets the region of interest (ROI) to a location. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Empty| Empty| Empty| Empty| Latitude| Longitude| Altitude|  */
    MAV_CMD_DO_SET_ROI_WPNEXT_OFFSET=196, /* Sets the region of interest (ROI) to be toward next waypoint, with optional pitch/roll/yaw offset. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Empty| Empty| Empty| Empty| pitch offset from next waypoint| roll offset from next waypoint| yaw offset from next waypoint|  */
    MAV_CMD_DO_SET_ROI_NONE=197, /* Cancels any previous ROI command returning the vehicle/sensors to default flight characteristics. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Empty| Empty| Empty| Empty| Empty| Empty| Empty|  */
+   MAV_CMD_DO_SET_ROI_SYSID=198, /* Mount tracks system with specified system ID. Determination of target vehicle position may be done with GLOBAL_POSITION_INT or any other means. |sysid| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
    MAV_CMD_DO_CONTROL_VIDEO=200, /* Control onboard camera system. |Camera ID (-1 for all)| Transmission: 0: disabled, 1: enabled compressed, 2: enabled raw| Transmission mode: 0: video stream, >0: single images every n seconds| Recording: 0: disabled, 1: enabled compressed, 2: enabled raw| Empty| Empty| Empty|  */
    MAV_CMD_DO_SET_ROI=201, /* Sets the region of interest (ROI) for a sensor set or the vehicle itself. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Region of interest mode.| Waypoint index/ target ID (depends on param 1).| Region of interest index. (allows a vehicle to manage multiple ROI's)| Empty| MAV_ROI_WPNEXT: pitch offset from next waypoint, MAV_ROI_LOCATION: latitude| MAV_ROI_WPNEXT: roll offset from next waypoint, MAV_ROI_LOCATION: longitude| MAV_ROI_WPNEXT: yaw offset from next waypoint, MAV_ROI_LOCATION: altitude|  */
    MAV_CMD_DO_DIGICAM_CONFIGURE=202, /* Configure digital camera. This is a fallback message for systems that have not yet implemented PARAM_EXT_XXX messages and camera definition files (see https://mavlink.io/en/services/camera_def.html ). |Modes: P, TV, AV, M, Etc.| Shutter speed: Divisor number for one second.| Aperture: F stop number.| ISO number e.g. 80, 100, 200, Etc.| Exposure type enumerator.| Command Identity.| Main engine cut-off time before camera trigger. (0 means no cut-off)|  */

autoquad/version.h

@@ -7,7 +7,7 @@
 #ifndef MAVLINK_VERSION_H
 #define MAVLINK_VERSION_H
 
-#define MAVLINK_BUILD_DATE "Mon Dec 09 2019"
+#define MAVLINK_BUILD_DATE "Tue Dec 10 2019"
 #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
  

common/common.h

@@ -494,7 +494,8 @@ typedef enum MAV_MOUNT_MODE
    MAV_MOUNT_MODE_MAVLINK_TARGETING=2, /* Load neutral position and start MAVLink Roll,Pitch,Yaw control with stabilization | */
    MAV_MOUNT_MODE_RC_TARGETING=3, /* Load neutral position and start RC Roll,Pitch,Yaw control with stabilization | */
    MAV_MOUNT_MODE_GPS_POINT=4, /* Load neutral position and start to point to Lat,Lon,Alt | */
-   MAV_MOUNT_MODE_ENUM_END=5, /*  | */
+   MAV_MOUNT_MODE_SYSID_TARGET=5, /* Gimbal tracks system with specified system ID | */
+   MAV_MOUNT_MODE_ENUM_END=6, /*  | */
 } MAV_MOUNT_MODE;
 #endif
 
@@ -606,6 +607,7 @@ typedef enum MAV_CMD
    MAV_CMD_DO_SET_ROI_LOCATION=195, /* Sets the region of interest (ROI) to a location. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Empty| Empty| Empty| Empty| Latitude| Longitude| Altitude|  */
    MAV_CMD_DO_SET_ROI_WPNEXT_OFFSET=196, /* Sets the region of interest (ROI) to be toward next waypoint, with optional pitch/roll/yaw offset. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Empty| Empty| Empty| Empty| pitch offset from next waypoint| roll offset from next waypoint| yaw offset from next waypoint|  */
    MAV_CMD_DO_SET_ROI_NONE=197, /* Cancels any previous ROI command returning the vehicle/sensors to default flight characteristics. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Empty| Empty| Empty| Empty| Empty| Empty| Empty|  */
+   MAV_CMD_DO_SET_ROI_SYSID=198, /* Mount tracks system with specified system ID. Determination of target vehicle position may be done with GLOBAL_POSITION_INT or any other means. |sysid| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
    MAV_CMD_DO_CONTROL_VIDEO=200, /* Control onboard camera system. |Camera ID (-1 for all)| Transmission: 0: disabled, 1: enabled compressed, 2: enabled raw| Transmission mode: 0: video stream, >0: single images every n seconds| Recording: 0: disabled, 1: enabled compressed, 2: enabled raw| Empty| Empty| Empty|  */
    MAV_CMD_DO_SET_ROI=201, /* Sets the region of interest (ROI) for a sensor set or the vehicle itself. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Region of interest mode.| Waypoint index/ target ID (depends on param 1).| Region of interest index. (allows a vehicle to manage multiple ROI's)| Empty| MAV_ROI_WPNEXT: pitch offset from next waypoint, MAV_ROI_LOCATION: latitude| MAV_ROI_WPNEXT: roll offset from next waypoint, MAV_ROI_LOCATION: longitude| MAV_ROI_WPNEXT: yaw offset from next waypoint, MAV_ROI_LOCATION: altitude|  */
    MAV_CMD_DO_DIGICAM_CONFIGURE=202, /* Configure digital camera. This is a fallback message for systems that have not yet implemented PARAM_EXT_XXX messages and camera definition files (see https://mavlink.io/en/services/camera_def.html ). |Modes: P, TV, AV, M, Etc.| Shutter speed: Divisor number for one second.| Aperture: F stop number.| ISO number e.g. 80, 100, 200, Etc.| Exposure type enumerator.| Command Identity.| Main engine cut-off time before camera trigger. (0 means no cut-off)|  */

common/version.h

@@ -7,7 +7,7 @@
 #ifndef MAVLINK_VERSION_H
 #define MAVLINK_VERSION_H
 
-#define MAVLINK_BUILD_DATE "Mon Dec 09 2019"
+#define MAVLINK_BUILD_DATE "Tue Dec 10 2019"
 #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
  

icarous/version.h

@@ -7,7 +7,7 @@
 #ifndef MAVLINK_VERSION_H
 #define MAVLINK_VERSION_H
 
-#define MAVLINK_BUILD_DATE "Mon Dec 09 2019"
+#define MAVLINK_BUILD_DATE "Tue Dec 10 2019"
 #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
  

matrixpilot/matrixpilot.h

@@ -105,6 +105,7 @@ typedef enum MAV_CMD
    MAV_CMD_DO_SET_ROI_LOCATION=195, /* Sets the region of interest (ROI) to a location. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Empty| Empty| Empty| Empty| Latitude| Longitude| Altitude|  */
    MAV_CMD_DO_SET_ROI_WPNEXT_OFFSET=196, /* Sets the region of interest (ROI) to be toward next waypoint, with optional pitch/roll/yaw offset. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Empty| Empty| Empty| Empty| pitch offset from next waypoint| roll offset from next waypoint| yaw offset from next waypoint|  */
    MAV_CMD_DO_SET_ROI_NONE=197, /* Cancels any previous ROI command returning the vehicle/sensors to default flight characteristics. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Empty| Empty| Empty| Empty| Empty| Empty| Empty|  */
+   MAV_CMD_DO_SET_ROI_SYSID=198, /* Mount tracks system with specified system ID. Determination of target vehicle position may be done with GLOBAL_POSITION_INT or any other means. |sysid| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
    MAV_CMD_DO_CONTROL_VIDEO=200, /* Control onboard camera system. |Camera ID (-1 for all)| Transmission: 0: disabled, 1: enabled compressed, 2: enabled raw| Transmission mode: 0: video stream, >0: single images every n seconds| Recording: 0: disabled, 1: enabled compressed, 2: enabled raw| Empty| Empty| Empty|  */
    MAV_CMD_DO_SET_ROI=201, /* Sets the region of interest (ROI) for a sensor set or the vehicle itself. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Region of interest mode.| Waypoint index/ target ID (depends on param 1).| Region of interest index. (allows a vehicle to manage multiple ROI's)| Empty| MAV_ROI_WPNEXT: pitch offset from next waypoint, MAV_ROI_LOCATION: latitude| MAV_ROI_WPNEXT: roll offset from next waypoint, MAV_ROI_LOCATION: longitude| MAV_ROI_WPNEXT: yaw offset from next waypoint, MAV_ROI_LOCATION: altitude|  */
    MAV_CMD_DO_DIGICAM_CONFIGURE=202, /* Configure digital camera. This is a fallback message for systems that have not yet implemented PARAM_EXT_XXX messages and camera definition files (see https://mavlink.io/en/services/camera_def.html ). |Modes: P, TV, AV, M, Etc.| Shutter speed: Divisor number for one second.| Aperture: F stop number.| ISO number e.g. 80, 100, 200, Etc.| Exposure type enumerator.| Command Identity.| Main engine cut-off time before camera trigger. (0 means no cut-off)|  */

matrixpilot/version.h

@@ -7,7 +7,7 @@
 #ifndef MAVLINK_VERSION_H
 #define MAVLINK_VERSION_H
 
-#define MAVLINK_BUILD_DATE "Mon Dec 09 2019"
+#define MAVLINK_BUILD_DATE "Tue Dec 10 2019"
 #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
  

message_definitions/common.xml

@@ -990,6 +990,9 @@
       <entry value="4" name="MAV_MOUNT_MODE_GPS_POINT">
         <description>Load neutral position and start to point to Lat,Lon,Alt</description>
       </entry>
+      <entry value="5" name="MAV_MOUNT_MODE_SYSID_TARGET">
+        <description>Gimbal tracks system with specified system ID</description>
+      </entry>
     </enum>
     <!-- UAVCAN node health enumeration -->
     <enum name="UAVCAN_NODE_HEALTH">
@@ -1562,6 +1565,10 @@
         <param index="6">Empty</param>
         <param index="7">Empty</param>
       </entry>
+      <entry value="198" name="MAV_CMD_DO_SET_ROI_SYSID">
+        <description>Mount tracks system with specified system ID. Determination of target vehicle position may be done with GLOBAL_POSITION_INT or any other means.</description>
+        <param index="1" label="System ID" minValue="1" maxValue="255" increment="1">sysid</param>
+      </entry>
       <entry value="200" name="MAV_CMD_DO_CONTROL_VIDEO" hasLocation="false" isDestination="false">
         <description>Control onboard camera system.</description>
         <param index="1" label="ID" minValue="-1" increment="1">Camera ID (-1 for all)</param>

minimal/version.h

@@ -7,7 +7,7 @@
 #ifndef MAVLINK_VERSION_H
 #define MAVLINK_VERSION_H
 
-#define MAVLINK_BUILD_DATE "Mon Dec 09 2019"
+#define MAVLINK_BUILD_DATE "Tue Dec 10 2019"
 #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 22
  

slugs/slugs.h

@@ -88,6 +88,7 @@ typedef enum MAV_CMD
    MAV_CMD_DO_SET_ROI_LOCATION=195, /* Sets the region of interest (ROI) to a location. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Empty| Empty| Empty| Empty| Latitude| Longitude| Altitude|  */
    MAV_CMD_DO_SET_ROI_WPNEXT_OFFSET=196, /* Sets the region of interest (ROI) to be toward next waypoint, with optional pitch/roll/yaw offset. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Empty| Empty| Empty| Empty| pitch offset from next waypoint| roll offset from next waypoint| yaw offset from next waypoint|  */
    MAV_CMD_DO_SET_ROI_NONE=197, /* Cancels any previous ROI command returning the vehicle/sensors to default flight characteristics. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Empty| Empty| Empty| Empty| Empty| Empty| Empty|  */
+   MAV_CMD_DO_SET_ROI_SYSID=198, /* Mount tracks system with specified system ID. Determination of target vehicle position may be done with GLOBAL_POSITION_INT or any other means. |sysid| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)| Reserved (default:0)|  */
    MAV_CMD_DO_CONTROL_VIDEO=200, /* Control onboard camera system. |Camera ID (-1 for all)| Transmission: 0: disabled, 1: enabled compressed, 2: enabled raw| Transmission mode: 0: video stream, >0: single images every n seconds| Recording: 0: disabled, 1: enabled compressed, 2: enabled raw| Empty| Empty| Empty|  */
    MAV_CMD_DO_SET_ROI=201, /* Sets the region of interest (ROI) for a sensor set or the vehicle itself. This can then be used by the vehicles control system to control the vehicle attitude and the attitude of various sensors such as cameras. |Region of interest mode.| Waypoint index/ target ID (depends on param 1).| Region of interest index. (allows a vehicle to manage multiple ROI's)| Empty| MAV_ROI_WPNEXT: pitch offset from next waypoint, MAV_ROI_LOCATION: latitude| MAV_ROI_WPNEXT: roll offset from next waypoint, MAV_ROI_LOCATION: longitude| MAV_ROI_WPNEXT: yaw offset from next waypoint, MAV_ROI_LOCATION: altitude|  */
    MAV_CMD_DO_DIGICAM_CONFIGURE=202, /* Configure digital camera. This is a fallback message for systems that have not yet implemented PARAM_EXT_XXX messages and camera definition files (see https://mavlink.io/en/services/camera_def.html ). |Modes: P, TV, AV, M, Etc.| Shutter speed: Divisor number for one second.| Aperture: F stop number.| ISO number e.g. 80, 100, 200, Etc.| Exposure type enumerator.| Command Identity.| Main engine cut-off time before camera trigger. (0 means no cut-off)|  */

slugs/version.h

@@ -7,7 +7,7 @@
 #ifndef MAVLINK_VERSION_H
 #define MAVLINK_VERSION_H
 
-#define MAVLINK_BUILD_DATE "Mon Dec 09 2019"
+#define MAVLINK_BUILD_DATE "Tue Dec 10 2019"
 #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
  

standard/version.h

@@ -7,7 +7,7 @@
 #ifndef MAVLINK_VERSION_H
 #define MAVLINK_VERSION_H
 
-#define MAVLINK_BUILD_DATE "Mon Dec 09 2019"
+#define MAVLINK_BUILD_DATE "Tue Dec 10 2019"
 #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255
  

test/version.h

@@ -7,7 +7,7 @@
 #ifndef MAVLINK_VERSION_H
 #define MAVLINK_VERSION_H
 
-#define MAVLINK_BUILD_DATE "Mon Dec 09 2019"
+#define MAVLINK_BUILD_DATE "Tue Dec 10 2019"
 #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 179
  

uAvionix/version.h

@@ -7,7 +7,7 @@
 #ifndef MAVLINK_VERSION_H
 #define MAVLINK_VERSION_H
 
-#define MAVLINK_BUILD_DATE "Mon Dec 09 2019"
+#define MAVLINK_BUILD_DATE "Tue Dec 10 2019"
 #define MAVLINK_WIRE_PROTOCOL_VERSION "2.0"
 #define MAVLINK_MAX_DIALECT_PAYLOAD_SIZE 255