Show an empty listbox at the beginning, that will be populated when user
start to search.
This is required if we want the ?reset=1 from the action URL to really
reset the selection.

This list is currently not sortable, so don't show sort column

This was often leaving a comment with 'None'

Checking that for all lines:
 - bank account is set, for both sides
 - bank accounts have IBAN and BIC
 - bank accounts are validated
 - bank accounts belong to the section (to prevent problem when cloning
and not changing the bank account)

These constraints are present in a property sheet that have to be associated to
accounting transaction movement portal type in a configurator step, and also as
assertions in the file generation.

and only show the generate credit transfer action if the payment mode is correct.

For historical reasons, PDF to text involved conversion first of the PDF to
png, then this png to tiff and the tiff was sent to tesseract. This works, but
it consumes a lot of resources with large PDFs, especially because the
intermediate png/tiff are created with a resolution of 300 DPI, which easily
needs serveral Go of RAM and temporary disk space.
This was obsorved with the PDF created by erp5_document_scanner, which are
usually high quality (1 or 2Mo per page) and even a one page PDF sometimes
took more than one minute to OCR.

Since 9.53 ghostscript integrates tesseract engine directly, we don't need to
prepare a tiff beforehand, we can directly send the PDF data to ghostscript.

These change use ghostscript if available and otherwise fallback to the same
pipeline as before. This will allow the transition until all ERP5 instances
are running a recent enough SlapOS with ghostscript 9.54. Fortunately, before
SlapOS include ghostscript 9.54, ERP5 software release did not have ghostscript
in $PATH, so we don't have to check ghostscript version, we assume that if gs
is in $PATH, it means we have a recent enough SlapOS.

This new approach was less tolerant regarding broken/password-protected PDFs
so we perform a new check that the PDF is valid and not encrypted before
trying to use OCR.

also enable more plugins:
  - https://ckeditor.com/cke4/addon/autolink
  - https://ckeditor.com/cke4/addon/pastebase64

Wendelin.core is now integral part of ERP5 (see [1,2]), but nothing
inside ERP5 currently uses it. And even though wendelin.core has its own
testsuite, integration problems are always possible.

-> Add test to erp5_core_test that minimally makes sure that basic
wendelin.core operations work.

This test currently passes with wendelin.core 1, which is the default.
It also passes as live test with wendelin.core 2.
However with wendelin.core 2 it currently fails on testnodes like e.g.

    ValueError: ZODB.MappingStorage.MappingStorage is in-RAM storage
	in-RAM storages are not supported:
	a zurl pointing to in-RAM storage in one process would lead to
	another in-RAM storage in WCFS process.

and

    RuntimeError: wcfs: join file:///srv/slapgrid/slappart8/srv/testnode/djk/test_suite/unit_test.2/var/Data.fs: server not started
    (https://nexedijs.erp5.net/#/test_result_module/20210530-92EF3124/102)

because we need to amend ERP5 test driver

1) to run tests on a real storage instead of in-RAM Mapping Storage(*), and
2) to spawn WCFS server for each such storage.

I will try to address those points in a later patch.

In the meantime there should be no reason not to merge this, because we
do not use wendelin.core 2 yet, and solving "1" and "2" first are
preconditions to begin such a usage.

/cc @rafael, @tomo, @seb, @jerome, @romain, @vpelletier, @Tyagov, @klaus, @jp

(*) Combining Zope and WCFS working together requires data to be on a real
    storage, not on in-RAM MappingStorage inside Zope's Python process.

[1] slapos@7f877621
[2] slapos!874 (comment 122339)

For SEPA files "End to End ID" we need a reference on payment transactions.
In the first prototype, the reference was set at the time of generating the
file, but it's a non common behaviour to generate reference when producing
reports, so we changed to ensuring payment has reference when adding to the
group.

Instead of using only setAggregate(), specify a portal type
to consider only payment transaction groups.

Because of the wrong TALES, jump and select was not working on the aggregate
relation field on accounting transaction line.

Support generating pain.001.001.02 credit transfer from payment transaction
groups.

Having a portal type is required to use the listbox as "Proxy Listbox ID" in a
relation field.

Follow the same rule that allow other organisations from the same group to
use bank account from the main section when selecting the payments and
displaying the payments from the group.

This constraint will have to be enabled by configurator/upgrader.

Instead of selecting already stopped payments, introduce a new "mode" field in
the dialog, where user can choose the previous behavior of selecting stopped
payments, or a new behavior where user would select planned or confirmed payments,
in that case the payments will be automatically stopped before being added to
the group.

Functional test for erp5_payment_mean with ERP5JS

Functional test for erp5_payment_mean

Rename the field, because on xhtml_style, submitting the field with an
empty limit now cause an error like:

    ValueError: invalid literal for int() with base 10: ''

and on ERP5JS it is ignoed.

Also, make the field required and set a small default value and a range,
to prevent accidentally displaying/selecting too much when there's lot of
data matching.

We don't want to show the ID which has a prefix, but the reference

By default, tesseract runs on 4 CPU and this can be controlled by
OMP_THREAD_LIMIT=1 to run on only one CPU (as documented on
https://tesseract-ocr.github.io/tessdoc/FAQ.html)

In ERP5, we tend to use one zope node per CPU, so we don't want each
of these zope nodes to spawn a process which will run on 4 CPU.

In a quick benchmark it's not slower, even a bit faster to disable threads:

    ## a big image in france (a picture of an invoice)
    $ time ./bin/tesseract /tmp/input.tiff /tmp/out.txt
    Tesseract Open Source OCR Engine v4.1.1 with Leptonica
    Page 1
    Error in pixClipBoxToForeground: box not within image
    Error in pixClipBoxToForeground: box not within image

    ________________________________________________________
    Executed in   14.41 secs   fish           external
      usr time   27.88 secs  1002.00 micros   27.88 secs
      sys time    0.74 secs    0.00 micros    0.74 secs

    $ time OMP_THREAD_LIMIT=1 ./bin/tesseract /tmp/input.tiff /tmp/out.txt
    Tesseract Open Source OCR Engine v4.1.1 with Leptonica
    Page 1
    Error in pixClipBoxToForeground: box not within image
    Error in pixClipBoxToForeground: box not within image

    ________________________________________________________
    Executed in   12.58 secs   fish           external
      usr time   11.84 secs  955.00 micros   11.84 secs
      sys time    0.52 secs  503.00 micros    0.52 secs

    ## a small japanese image

    $ time ./tesseract -l jpn+eng /tmp/inputjp.tiff /tmp/out.txt
    Tesseract Open Source OCR Engine v4.1.1 with Leptonica
    Page 1

    ________________________________________________________
    Executed in    2.16 secs   fish           external
      usr time    3.77 secs  590.00 micros    3.77 secs
      sys time    0.27 secs  209.00 micros    0.27 secs

    $ time OMP_THREAD_LIMIT=1 ./tesseract -l jpn+eng /tmp/inputjp.tiff /tmp/out.txt
    Tesseract Open Source OCR Engine v4.1.1 with Leptonica
    Page 1

    ________________________________________________________
    Executed in    2.02 secs   fish           external
      usr time  1766.07 millis  1437.00 micros  1764.63 millis
      sys time  214.06 millis  522.00 micros  213.54 millis

because DMS extends image portal types with interaction workflows etc,
it's better to also cover the case where DMS is installed.

This fixes problem that some formats such as tiff were not supported.

testSQLCachedWorklist is now part of a dedicated erp5_worklist_sql_test
business template.

We had two mimetypes entries, which caused inconsistencies depending on
wether the lookup was done by mimetype, by glob or by extension.

We had:

- name:
   "Windows BMP image"
- mimetypes:
    image/bmp
    image/x-bmp
    image/x-MS-bmp
- extensions:
- globs:
    *.bmp

and

- name:
   "image/x-ms-bmp"
- mimetypes:
    image/x-ms-bmp
- extensions:
    bmp
- globs:

With this commit they are merged into one:

- name:
   "Windows BMP image"
- mimetypes:
    image/x-ms-bmp
    image/bmp
    image/x-bmp
    image/x-MS-bmp
- extensions:
    bmp
- globs:
    *.bmp

This way we only have one consistent mimetype.

For compatibility with extension lookups (that are done in
Document_guessMimeType interaction workflow from DMS), image/x-ms-bmp is
kept as default. This might not be the best choice, according to
https://www.iana.org/assignments/media-types/media-types.xhtml

This script creates Web Message, not Mail Message

When updating ghostscript, the rendering of images seems slightly different, as we can observe on the logos.